LBWA0ZZ2HL - Sub-1GHz Wi-Fi HaLow 802.11ah Module | Murata
MPN: LBWA0ZZ2HL ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $9.8 | $9.80 |
| 10 | $8.95 | $89.50 |
| 100 | $7.9 | $790.00 |
| 500 | $7.2 | $3,600.00 |
| 1,000 | $6.55 | $6,550.00 |
LBWA0ZZ2HL Overview
A Wi-Fi HaLow module is a wireless connectivity module that implements the IEEE 802.11ah Sub-1 GHz (S1G) amendment of the Wi-Fi standard. Unlike conventional 2.4 GHz and 5 GHz Wi-Fi, HaLow trades peak bandwidth for substantially greater range, better wall-penetration, and lower power consumption, making it a member of the low-power wide-area (LPWAN) connectivity family alongside LoRa and NB-IoT, while retaining native IP networking and Wi-Fi security.
Key features of the LBWA0ZZ2HL include operation across key regional Sub-1 GHz bands (the HL variant covers 750-950 MHz bands for regions such as Europe, Japan and others, while the companion HK variant targets 902-928 MHz), ultra-low power consumption for battery-powered IoT endpoints, and data rates up to 15 Mbps - far higher than typical LPWAN technologies. The integrated NRC7394 SoC handles MAC, baseband and RF in a single chipset, simplifying host integration over SDIO/SPI interfaces.
Technically, the module implements 802.11ah SISO with standard Wi-Fi security, allowing direct IP connectivity to HaLow access points. Murata, as a leading module manufacturer, provides certification-ready design that reduces end-product regulatory burden across key regions. According to Murata product literature, the Type 2HL is designed specifically for the connectivity needs of Internet of Things (IoT) devices.
Typical applications include smart utility metering, industrial sensors, building automation, smart city infrastructure, and agricultural monitoring - all scenarios requiring multi-hundred-meter to kilometer-scale links with years of battery life.
Designers should verify regional RF regulatory certification (the HL and HK variants cover different frequency bands) and confirm antenna matching and supply filtering per the manufacturer datasheet.
This page synthesizes verified distributor and manufacturer data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Drop-in alternatives for LBWA0ZZ2HL — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with LBWA0ZZ2HL (same form factor and footprint) — differing in Frequency Range.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
LBWA0ZZ2HK
✅ Drop-In✓ In Stock
$1 / Unit
View Datasheet →LBWA0ZZ2HL Specifications (manufacturer-published)
| Product Type | Wi-Fi HaLow (802.11ah) system-on-module |
| Chipset | NEWRACOM NRC7394 |
| Standard | IEEE 802.11ah SISO (Sub-1 GHz / S1G) |
| Frequency Range | 750 MHz to 950 MHz |
| Data Rate | Up to 15 Mbps |
| Line-of-Sight Range | Up to 1 km |
| Output Power | Up to 17 dBm |
| Supply Voltage | 2.7 V to 3.6 V |
| Security | Wi-Fi security per 802.11ah |
| RoHS Status | Compliant |
LBWA0ZZ2HL Interfaces & Connectors
LBWA0ZZ2HL exposes the following interfaces and connectors as published by the manufacturer: Power Input. Expansion header pinout, connector pin numbering, and electrical limits are defined in the manufacturer documentation.
| Power Input | 2.7 V to 3.6 V |
Refer to the manufacturer documentation for the full expansion header pinout and connector pin numbering.
Power & Thermal Characteristics
| Power Input | 2.7 V to 3.6 V |
Power input and thermal parameters for LBWA0ZZ2HL as published by the manufacturer.
Typical Applications
LBWA0ZZ2HL is suitable for 6 applications: Smart Utility Metering, Industrial Sensor Networks, Smart City Infrastructure, Building Automation and Security, Agricultural and Environmental Monitoring, Asset Tracking and Cold Chain.
Smart Utility Metering
The LBWA0ZZ2HL fits smart electricity, water and gas metering because utilities need kilometer-class links with native IP networking and multi-year battery life. Its Sub-1 GHz 802.11ah signaling propagates through building enclosures and basements far better than 2.4 GHz Wi-Fi, and the module's up-to-15 Mbps throughput supports fleet firmware-over-the-air updates that narrowband LPWANs cannot practically deliver. Powered from a 2.7-3.6 V rail that a single lithium cell provides directly, the module's ultra-low power profile allows long sleep intervals between meter reads. Placed behind the meter's NRC7394-certified RF chain with a suitable external antenna, the HL variant serves European and Japanese metering bands while the HK sibling covers North America, letting one PCB design serve multiple regulatory regions by swapping module variant.
Recommended
Industrial Sensor Networks
Factory and plant-floor sensing across large campuses benefits from the LBWA0ZZ2HL's 1 km line-of-sight range and wall-penetrating Sub-1 GHz link, which reach metal-clad buildings and remote tanks where 2.4 GHz Wi-Fi fails. The module's 802.11ah SISO operation with standard Wi-Fi security allows sensors to join IP-based HaLow access points directly, avoiding proprietary gateway translation layers required by LoRa or Sigfox designs. With data rates up to 15 Mbps, vibration or acoustic sensor data can be streamed rather than merely sampled, and the 2.7-3.6 V supply interfaces cleanly with industrial 3.3 V rails. Designers should budget antenna placement away from large metal masses and verify the regional channel plan - the HL variant covers 750-950 MHz bands used outside North America.
Recommended
Smart City Infrastructure
Street lighting, parking sensors, environmental monitoring and traffic assets distributed across a city require connectivity that spans hundreds of meters per hop with minimal infrastructure. The LBWA0ZZ2HL addresses this with up to 1 km line-of-sight range at 750-950 MHz, letting a single HaLow access point serve many endpoints and reducing gateway count versus 2.4 GHz mesh designs. Its native IP stack over 802.11ah means city management software talks standard TCP/IP to each node, and Wi-Fi-grade security protects municipal networks. The ultra-low power consumption supports solar- or battery-powered nodes, while 15 Mbps headroom accommodates camera-adjacent or aggregated-sensor traffic. Selection of the HL variant (750-950 MHz) versus the HK variant (902-928 MHz) follows the deployment region's Sub-1 GHz regulatory band plan.
Recommended
Building Automation and Security
Commercial building automation - HVAC controllers, access control, occupancy sensors, fire and security devices - needs reliable coverage across concrete floors and elevator shafts. The LBWA0ZZ2HL's Sub-1 GHz 802.11ah link penetrates building materials substantially better than 2.4 GHz Wi-Fi, cutting the number of repeaters per floor. Because it delivers standard Wi-Fi security and IP connectivity at up to 15 Mbps, existing BMS software integrates without protocol gateways, and battery-powered door locks and sensors benefit from the module's ultra-low power design on a 2.7-3.6 V supply. For retrofit projects spanning multiple buildings, the 1 km line-of-sight range links outbuildings to a central HaLow access point. Use the HL variant for European and Japanese deployments and the HK variant where 902-928 MHz applies.
Recommended
Agricultural and Environmental Monitoring
Crop, soil-moisture and weather monitoring stations spread across fields need long-range, low-power links without cellular subscription cost. The LBWA0ZZ2HL provides up to 1 km line-of-sight range per hop at Sub-1 GHz frequencies, which diffract over terrain and vegetation better than 2.4 GHz signals, enabling hub-and-spoke topologies from a single HaLow gateway per farm. The module's ultra-low power consumption allows small solar-battery nodes to operate year-round, and its 2.7-3.6 V supply range matches lithium primary cells directly. Unlike narrowband LPWANs, the up-to-15 Mbps 802.11ah link supports periodic high-rate data pulls, imagery from low-cost cameras, and fast over-the-air firmware updates across the whole fleet. Regional band selection between the HL (750-950 MHz) and HK (902-928 MHz) variants follows local spectrum rules.
Recommended
Asset Tracking and Cold Chain
Long-range tracking of trailers, containers, livestock and cold-chain assets benefits from the LBWA0ZZ2HL's combination of 1 km range, low power, and standard IP networking. Sub-1 GHz propagation at 750-950 MHz maintains links around racking, vehicle bodies and warehouse walls where 2.4 GHz radios drop out, and Wi-Fi HaLow access points installed per facility create seamless handoff zones as assets move. The module's ultra-low power design supports small coin- or cell-based trackers reporting position and temperature on scheduled intervals, while bursts of up to 15 Mbps allow quick data dumps when an asset returns to range. Supplying the module from a 2.7-3.6 V rail keeps the power tree to one cell plus a regulator. Choose the HL variant for regional bands outside North America, HK within it.
Recommended
Engineering reference data for LBWA0ZZ2HL — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | LBWA0ZZ2HK |
|---|---|---|
| Package | Type 2H castellated SMD module | Type 2H castellated SMD module - same |
| Brand | Murata Manufacturing | Murata Manufacturing |
| Chipset | NEWRACOM NRC7394 | NEWRACOM NRC7394 |
| Standard | IEEE 802.11ah SISO | IEEE 802.11ah SISO |
| Frequency Range | 750 MHz to 950 MHz | 902 MHz to 928 MHz |
| Line-of-Sight Range | Up to 1 km | Up to 2 km (cited in press coverage) |
| Supply Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V (same platform) |
| Primary Region | Regional 750-950 MHz HaLow bands (e.g., EU, JP) | North America 902-928 MHz |
Key Differentiators
- Regional band coverage for non-North-American HaLow deployments (vs LBWA0ZZ2HK)
- Far higher throughput than LPWAN alternatives (vs Typical LoRa modules (comparison basis))
- Integrated certified module design on NRC7394 (vs Discrete NRC7394 chip-down design)
Design Notes
Supply the LBWA0ZZ2HL from a clean 2.7 V to 3.6 V rail as specified on the Murata product page and EverythingRF listing. RF transmit bursts up to 17 dBm create pulsed current demand; place a low-ESR bulk capacitor (10 uF or greater, value to be confirmed in the datasheet) close to the module supply pin together with high-frequency decoupling, and keep the supply trace wide and short. A lithium primary cell can drive the module directly within this range; verify cell voltage sag under TX burst against the 2.7 V minimum.
The Type 2H is a castellated-edge SMD module; follow Murata's recommended land pattern and keep-out from the official Type 2HL datasheet before finalizing the PCB. Keep the antenna feed or connector path at the board edge with a controlled-impedance run to the antenna, free of adjacent digital traces, and respect any ground keep-out specified under the antenna region. Confirm the exact keep-out dimensions, module dimensions, and pin map from the Murata datasheet, as those figures were not included in the data verified for this page.
Regional variant selection is the most common error with this family: the LBWA0ZZ2HL covers 750-950 MHz regional HaLow bands (e.g., Europe, Japan) while the LBWA0ZZ2HK covers 902-928 MHz for North America, per Murata and CNX Software coverage. Shipping the wrong variant renders the product non-compliant in-market. Also confirm that your HaLow access point's 802.11ah channel plan overlaps the module's supported band, and that the module is paired with a certified antenna to preserve regulatory conformity of the end product.
Compliance Information
RoHS compliance expected of Murata production modules; formal REACH, halogen-free and conflict-minerals declarations were not present in the verified data - obtain official declarations from Murata's product information portal (pim.murata.com).