Texas Instruments

LM2902KDR - 26V 1.2MHz Quad Op Amp | Texas Instruments

MPN: LM2902KDR ✓ Active
26 V Vdss 14-pin SOIC Package
MOQ: 1 |

LM2902KDR Overview

The Texas Instruments LM2902KDR is a quad general-purpose operational amplifier designed for single- and dual-supply operation, with four amplifiers in a 14-pin SOIC package. Key characteristics include a 26 V maximum supply rating, 1.2 MHz gain-bandwidth product, and improved ESD tolerance of 2 kV. The device operates from -40°C to +125°C, making it suitable for industrial, automotive, and general-purpose analog signal-conditioning systems.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs. The LM2902KDR contains four such amplifiers in one package, allowing a design to implement multiple gain stages, buffers, comparators, or active filters without using separate packages. In the broader electronics hierarchy, it belongs to the amplifier IC and general-purpose operational amplifier families, providing a practical combination of wide supply-voltage tolerance, low cost, and circuit versatility.

The device provides input-offset voltage and drift characteristics suitable for precision-enough general-purpose feedback networks, common-mode input range, output swing capability, and short-circuit-safe outputs. Its 1.2 MHz gain-bandwidth product supports low-frequency signal amplification and applications including sensor conditioning, active filtering, voltage buffering, and audio or control-signal interfaces. Improved ESD protection of 2 kV increases robustness in exposed connector and industrial environments, although normal handling precautions remain necessary.

Each amplifier uses standard complementary differential inputs and an output stage capable of driving common external loads within its specified output-swing limits. Designers should preserve adequate input/output voltage headroom from the supply rails and account for input bias-current effects when using high source impedances. Decoupling capacitors should be placed close to the supply pins, while sensitive analog inputs should be routed away from switching nodes and high-current return paths.

Typical uses include four-channel sensor interfaces, industrial control modules, audio preamplifier stages, active low-pass filters, motor and actuator signal conditioning, and general dual-supply analog circuits. The four amplifiers can be used independently, so unused channels should be configured according to the manufacturer's recommendations rather than left floating. This approach prevents unintended oscillation and reduces sensitivity to stray pickup.

A critical layout consideration is to separate the four high-impedance input paths from power-converter switches and digital return currents. When driving a capacitive load, add an isolation resistor close to the amplifier output and verify stability on the assembled board. The 14-pin SOIC footprint supports conventional leaded-assembly processes, while its wide temperature range supports demanding industrial environments.

This product overview connects the LM2902KDR's four-channel architecture, 26 V supply capability, 1.2 MHz bandwidth, 2 kV ESD rating, and temperature range with practical placement guidance, pin-compatible alternatives, and selection criteria for general-purpose analog designs.

Drop-in alternatives for LM2902KDR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with LM2902KDR (same form factor and footprint) — differing in Package, Amplifier Type, Input Offset Voltage, Operating Temperature Range, Gain-Bandwidth Product.

Texas Instruments
Package: 14-pin SOIC (D)
Amplifier Type: Quad general-purpose operational amplifier
Operating Temperature Range: -25°C to +85°C
Compare with LM2902KDR →
Texas Instruments
Package: 14-SOIC, 3.90 mm width
Amplifier Type: General Purpose
Input Offset Voltage: 2 mV
Compare with LM2902KDR →
Texas Instruments
Package: 14-SOIC
Amplifier Type: General Purpose
Input Offset Voltage: 2 mV typical
Compare with LM2902KDR →
Texas Instruments
Package: 14-SOIC (D), 3.90 mm width
Amplifier Type: General-purpose operational amplifier
Input Offset Voltage: 2 mV
Compare with LM2902KDR →
Texas Instruments
Package: SOIC-14 (D)
Amplifier Type: General-purpose operational amplifier
Input Offset Voltage: 2 mV
Compare with LM2902KDR →
Texas Instruments
Package: 14-pin SOIC (D)
Input Offset Voltage: 2 mV
Operating Temperature Range: -40 °C to +125 °C
Compare with LM2902KDR →
Texas Instruments
Package: 14-pin SOIC (D), 3.90 mm width
Amplifier Type: General-purpose operational amplifier
Operating Temperature Range: -40 °C to +125 °C
Compare with LM2902KDR →
Texas Instruments
Package: 14-SOIC
Compare with LM2902KDR →
Texas Instruments
Package: 14-pin SOIC
Amplifier Type: General-purpose operational amplifier
Input Offset Voltage: 3 mV
Compare with LM2902KDR →

LM2902DRE4

✅ Drop-In
Texas Instruments
📦 14-SOIC
General Purpose · 4 circuits · 26 V · Up to 26 V · ±13 V · 1.2 MHz · 2 mV typical · 0.5 V/µs

Contact for price

View Datasheet →

LM2902KDG4

✅ Drop-In
Texas Instruments
📦 14-SOIC
General-purpose operational amplifier · 4 channels · 26 V · 1.2 MHz · 2 kV · 14-SOIC · 3.90 mm (0.154 inch) · Through-hole

Contact for price

View Datasheet →

LM2902KDR

✅ Drop-In
Texas Instruments
📦 14-SOIC
4 circuits · General-purpose operational amplifier · 26 V · 3 V to 26 V · 1.2 MHz · 2 kV · -40°C to +125°C · 14-pin SOIC

Contact for price

View Datasheet →

LM2902KDR Maximum Ratings & Electrical Characteristics

Amplifier Count 4 circuits
Product Type General-purpose operational amplifier
Maximum Supply Voltage 26 V
Nominal Single-Supply Range 3 V to 26 V
Gain-Bandwidth Product 1.2 MHz
Improved ESD Tolerance 2 kV
Operating Temperature Range -40°C to +125°C
Package Type 14-pin SOIC
Mounting Type Surface mount
Channel Count 4
Supply Configuration Single or dual supply
AEC-Q100 Qualification Qualified

LM2902KDR 14-pin soic Pin Configuration Guide

Pin configuration for LM2902KDR (14-pin soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

14-pin soic package pinout diagram for LM2902KDR

No detailed pinout data available for LM2902KDR.

Refer to the datasheet for full pin configuration.

Typical Applications

LM2902KDR is suitable for 6 applications: Industrial Sensor Signal Conditioning, Active Audio Preamplification, Power Supply Feedback Buffer, Active Filtering and Oscillator Circuits, Motor and Actuator Control Interfaces, General-Purpose Analog Signal Interface.

🏭

Industrial Sensor Signal Conditioning

The LM2902KDR is well suited to conditioning four low-frequency sensor channels in industrial control equipment because it combines four general-purpose amplifiers, a 1.2 MHz gain-bandwidth product, and operation from -40°C to +125°C. Each channel can amplify a sensor output, establish gain with feedback components, and provide impedance isolation before an ADC. The 26 V maximum supply rating also permits operation from protected industrial rails when the input and output voltages remain within the specified limits. High-impedance sensors require resistor values that account for input bias current, while noisy power systems benefit from local bypass capacitors and careful separation of analog inputs from switching currents.

🎧

Active Audio Preamplification

The LM2902KDR can implement four low-frequency preamplifier or buffer stages in audio equipment because its 1.2 MHz gain-bandwidth product is suitable for audio-band feedback networks. The four channels can support source buffers, tone-control stages, headphone-driver interfaces, or balanced-input signal conditioning. Its general-purpose architecture is appropriate where moderate bandwidth, low distortion, and inexpensive channel integration matter more than rail-to-rail output swing. Gain-setting resistors should be selected with the amplifier’s open-loop gain and frequency characteristics in mind, and the output must remain within the specified swing limits for the chosen single- or dual-supply voltage.

⚡

Power Supply Feedback Buffer

The LM2902KDR can serve as a buffer in power-supply feedback and remote-sensing systems where a high-impedance divider must be isolated from the power stage. A wide supply operating range and four independent channels allow separate buffers for output-voltage sensing, load sensing, and auxiliary rails in a compact 14-SOIC footprint. The 26 V maximum rating is useful around higher-voltage industrial systems, provided all amplifier pins remain within their absolute limits. Designers should keep feedback routing short, place the amplifier close to the sensed node, and account for input bias current and offset error when choosing high-value feedback resistors.

🔧

Active Filtering and Oscillator Circuits

The LM2902KDR is suitable for active filter and oscillator implementations that require several matched general-purpose amplifier channels. Its 1.2 MHz gain-bandwidth product provides useful bandwidth for low-frequency audio, control, and instrumentation networks, while the quad package reduces the number of components on the board. Each channel can form a first-order or second-order active filter section, and multiple sections can implement a higher-order response. Component tolerances and the amplifier’s gain-bandwidth behavior directly affect pole placement, so simulations should verify gain, phase margin, and output swing across the intended supply voltage and temperature range.

🤖

Motor and Actuator Control Interfaces

The LM2902KDR can condition current-sense, position, and actuator-command signals in industrial and automotive-adjacent control systems. Its four amplifiers allow independent scaling of multiple feedback signals, while operation from -40°C to +125°C supports designs expected to experience substantial temperature variation. The 26 V maximum supply rating can accommodate suitably protected 24 V industrial environments, although every input and output must remain within the datasheet’s operating limits. For motor systems, route sense-node signals away from motor-switching edges, use Kelvin-style connections where appropriate, and place supply bypassing close to the package.

🧩

General-Purpose Analog Signal Interface

The LM2902KDR works well as a general analog interface between sensors, logic levels, and downstream converters. Its four channels can combine comparators, unity-gain buffers, and fixed-gain stages in one 14-SOIC package. The 1.2 MHz bandwidth is sufficient for many slow industrial and control signals, while the 2 kV improved ESD rating adds robustness in connector-exposed applications. The amplifier is not a rail-to-rail precision device, so input common-mode range, output swing, offset, and bias current must be checked against the circuit. Unused channels should be tied to a defined bias voltage instead of being left open.

Recommended Products Summary

LM2902K Same quad general-purpose amplifier family Used in: Industrial Sensor Signal Conditioning, Active Audio Preamplification, Power Supply Feedback Buffer, Active Filtering and Oscillator Circuits, Motor and Actuator Control Interfaces, General-Purpose Analog Signal Interface LM2902KV Related wide-temperature quad amplifier ordering option Used in: Industrial Sensor Signal Conditioning, Active Audio Preamplification, Power Supply Feedback Buffer, Active Filtering and Oscillator Circuits, Motor and Actuator Control Interfaces, General-Purpose Analog Signal Interface
What is the operating voltage of LM2902KDR?
The LM2902KDR supports a 26 V maximum supply rating and can operate from a single supply or with dual supplies. According to the Texas Instruments LM2902K product information, the device is designed for general-purpose analog operation across a wide supply range. Designers should keep the total supply voltage within the 26 V rating and maintain the input and output voltages inside the common-mode and output-swing limits specified in the manufacturer datasheet.
What are the key specifications of LM2902KDR that engineers should know?
The LM2902KDR is a four-channel, general-purpose operational amplifier with a 26 V maximum supply rating, 1.2 MHz gain-bandwidth product, 2 kV improved ESD tolerance, and a -40°C to +125°C operating-temperature range. Texas Instruments describes the device as a quad operational amplifier in a 14-pin SOIC package. Its four independent channels make it suitable for buffering, gain stages, active filtering, and sensor-interface circuits.
Where can I download the LM2902KDR datasheet PDF?
The official LM2902KDR documentation is available through the Texas Instruments LM2902K product page at https://www.ti.com/product/LM2902K. Use the manufacturer datasheet to confirm the complete ordering information, electrical limits, recommended operating conditions, package drawings, and pin descriptions. The LM2902KDR ordering record identifies a 14-pin SOIC package and an operating range of -40°C to 125°C.
Where can I find the LM2902KDR pinout?
Use the pin-description table and package drawing in the Texas Instruments LM2902K datasheet for the authoritative LM2902KDR pinout. The device is supplied in a 14-pin SOIC package containing four operational amplifiers. Do not infer a complete pin list from another package variant, because exposed-pad, narrow-body, wide-body, and automotive order codes can use different physical packages.
Can LM2902KDR operate from a single 5 V supply?
Yes, the LM2902KDR can be operated from a single 5 V supply as long as every input and output remains within the datasheet’s common-mode input and output-swing limits. Its quad architecture permits four gain or buffer stages on one board, reducing package count. A stable bypass capacitor should be placed close to the supply pins, and unused amplifier inputs must be biased rather than left floating.
What can replace the LM2902KDR?
The Texas Instruments LM2902DRE4 is a pin- and package-compatible replacement candidate in a 14-SOIC package, while the Texas Instruments LM2902KDG4 provides another directly comparable 14-SOIC ordering option. The ROHM Semiconductor LM2902KDR is also a four-channel 14-pin general-purpose amplifier candidate. Confirm supply range, temperature grade, offset voltage, and stability against the current datasheet before approving any substitution.
Is LM2902KDR the same as LM2902DRE4?
The LM2902DRE4 and LM2902KDR belong to the same Texas Instruments LM2902 family and use the same 14-SOIC footprint, but their order codes can denote different qualification, temperature, or packaging details. A cross-reference listing identifies the LM2902DRE4 as a direct replacement candidate for LM2902KDR. Verify the exact electrical limits, operating-temperature grade, ESD rating, and orderable suffix before treating the parts as interchangeable.
LM2902KDR vs LM2902DRE4: which is better for an industrial design?
Choose the LM2902KDR when the design benefits from its documented -40°C to +125°C operating range and Texas Instruments’ ordering configuration, and choose the LM2902DRE4 when a directly compatible 14-SOIC alternative is preferred. Both are four-channel general-purpose amplifiers, and the cross-reference record identifies the LM2902DRE4 as a complete package-compatible replacement candidate. The final decision should consider exact temperature grade, supply limits, and required automotive qualification.
When should I choose LM2902KDR over another quad op amp?
Choose the LM2902KDR when four general-purpose amplifier channels, a 14-SOIC footprint, operation from a single or dual supply, and a wide -40°C to +125°C temperature range match the design. It is appropriate for industrial signal conditioning, buffering, active filters, and general control systems. Select a precision, rail-to-rail, high-speed, or low-noise amplifier instead when the application requires accuracy or performance beyond general-purpose operation.
Is LM2902KDR suitable for sensor signal conditioning?
Yes, the LM2902KDR is suitable for many sensor signal-conditioning stages because it provides four channels, a 1.2 MHz gain-bandwidth product, and operation over -40°C to +125°C. Its common-mode range and output swing must remain inside the datasheet limits at the selected supply voltage. For high-impedance sensors, account for input bias current and offset drift when choosing resistor values.
Where to buy LM2902KDR online?
Use the Request a Quote form on this page to request LM2902KDR availability, order quantities, and a current quotation. The part is identified as a 14-SOIC, four-channel operational amplifier from Texas Instruments. The form allows buyers to specify quantity and packaging requirements without relying on a stale price or unsupported stock claim.
What is the price of LM2902KDR?
The current commercial quotation for LM2902KDR is obtained through the Request a Quote form on this page. Pricing depends on order quantity, package form, and current component availability. The Request a Quote form should be used rather than a historical listing value so that the returned quotation reflects current purchasing conditions.
What is the lead time for LM2902KDR?
The current lead time for LM2902KDR should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, and the selected shipment configuration. State the required quantity and target delivery date in the request so that the manufacturer’s authorized supply chain can confirm the appropriate schedule.
Is LM2902KDR in stock?
Stock status for LM2902KDR changes with order volume and supply conditions, so current availability should be confirmed through the Request a Quote form on this page. The part is a standard Texas Instruments LM2902K-family ordering configuration in a 14-SOIC package. Submit the required quantity and packaging preference for a current availability response.
What is the best ROHM Semiconductor equivalent for LM2902KDR?
The ROHM Semiconductor LM2902KDR is the closest identified alternative because it is also a four-channel general-purpose operational amplifier in a 14-pin package. Its published supply description supports operation around ±16 V, or 32 V total, while the Texas Instruments LM2902KDR is identified with a 26 V maximum supply rating. Confirm exact input range, offset, bias current, output swing, and temperature grade before substituting it into an existing board.

Engineering reference data for LM2902KDR — comparison, design guidance, and compliance information.

Selection Guide

Choose the LM2902KDR when a design requires four general-purpose amplifier channels, a 14-SOIC footprint, a 26 V maximum supply rating, and operation across -40°C to +125°C. It is a practical fit for industrial sensor interfaces, active filters, buffers, audio preamplifiers, and low-frequency control systems. Choose the LM2902DRE4 when a same-family Texas Instruments alternative with a documented 500 mV/µs slew rate is preferred and the exact qualification details match the application. Choose the LM2902KDG4 when its order-code temperature or qualification attributes better satisfy the production requirement. The ROHM Semiconductor LM2902KDR is an option when its listed ±16 V supply capability and electrical characteristics are preferable, but its higher total supply rating requires a separate check of absolute-maximum and operating conditions. For designs requiring rail-to-rail inputs, very low offset, low noise, or higher bandwidth, choose a different amplifier family.

Comparison with Alternatives

Parameter This Product LM2902DRE4 LM2902KDG4 LM2902KDR
Brand Texas Instruments Texas Instruments Texas Instruments ROHM Semiconductor
Package 14-SOIC 14-SOIC - same 14-SOIC - same 14-pin SOIC - same
Amplifier Count 4 circuits 4 channels 4 channels Quad operational amplifier
Product Type General-purpose operational amplifier Operational amplifier Operational amplifier General-purpose operational amplifier

Key Differentiators

  • Four general-purpose channels in one package (vs LM2902DRE4)
  • Documented wide-temperature operation (vs LM2902DRE4)
  • 1.2 MHz gain-bandwidth product (vs LM2902KDG4)
  • Improved ESD protection (vs LM2902DRE4)

Design Notes

Place the supply bypass capacitor immediately adjacent to the LM2902KDR supply and ground pins, with a short return path to the package ground. High-impedance input traces should be kept away from switching-node copper and fast digital routes. Because all four amplifiers share the same package, a noisy channel can affect the others; preserve grounded separation between input, output, and power paths even when only one channel is used.

Do not allow input or output voltages to exceed the device’s common-mode and output-swing limits. The 26 V maximum supply rating is not a permission to operate every pin at 26 V relative to ground. In single-supply circuits, bias unused amplifier inputs at a defined voltage within the input range, and check the no-connection guidance in the current manufacturer datasheet before finalizing the schematic.

For high-impedance sources, calculate the error caused by input bias current flowing through the source and feedback impedances, and avoid unnecessarily large resistor values. Keep feedback loops compact to minimize parasitic coupling. If driving a capacitive load, add a small isolation resistor close to the output and verify settling and stability on the final layout, particularly when cable capacitance or long PCB traces are present.

Estimated: with a 12 V input, 5 V output, and 10 mA load, the ideal linear-regulator-style power dissipation in one amplifier channel would be approximately 70 mW using P = (12 V - 5 V) × 0.01 A. Actual package heating also depends on all four channels, adjacent circuitry, board copper, and ambient temperature. Validate the final design using the worst-case supply, load, and ambient conditions rather than relying on this estimate alone.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The LM2902KDR datasheet listing identifies AEC-Q100 qualification for automotive applications. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer documentation.

Related Searches

LM2902KDR datasheet LM2902KDR datasheet pdf LM2902KDR pinout LM2902KDR equivalent LM2902KDR replacement LM2902KDR drop-in replacement LM2902KDR vs LM2902DRE4 LM2902KDR 14-SOIC footprint LM2902KDR 26V quad op amp LM2902KDR price LM2902KDR stock Texas Instruments LM2902KDR

Related Components & Terms

Texas Instruments LM2902KDR LM2902K LM2902KV LM2902DRE4 LM2902KDG4 ROHM Semiconductor quad operational amplifier general-purpose amplifier amplifier IC analog integrated circuit semiconductor 14-SOIC SOIC family surface-mount package SMD gain-bandwidth product 1.2 MHz 26 V 2 kV ESD AEC-Q100 industrial sensor conditioning active filtering power-supply feedback buffer
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details