LM2902KDR - 26V 1.2MHz Quad Op Amp | Texas Instruments
部品番号: LM2902KDR ✓ 生産中LM2902KDR 概要
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs. The LM2902KDR contains four such amplifiers in one package, allowing a design to implement multiple gain stages, buffers, comparators, or active filters without using separate packages. In the broader electronics hierarchy, it belongs to the amplifier IC and general-purpose operational amplifier families, providing a practical combination of wide supply-voltage tolerance, low cost, and circuit versatility.
The device provides input-offset voltage and drift characteristics suitable for precision-enough general-purpose feedback networks, common-mode input range, output swing capability, and short-circuit-safe outputs. Its 1.2 MHz gain-bandwidth product supports low-frequency signal amplification and applications including sensor conditioning, active filtering, voltage buffering, and audio or control-signal interfaces. Improved ESD protection of 2 kV increases robustness in exposed connector and industrial environments, although normal handling precautions remain necessary.
Each amplifier uses standard complementary differential inputs and an output stage capable of driving common external loads within its specified output-swing limits. Designers should preserve adequate input/output voltage headroom from the supply rails and account for input bias-current effects when using high source impedances. Decoupling capacitors should be placed close to the supply pins, while sensitive analog inputs should be routed away from switching nodes and high-current return paths.
Typical uses include four-channel sensor interfaces, industrial control modules, audio preamplifier stages, active low-pass filters, motor and actuator signal conditioning, and general dual-supply analog circuits. The four amplifiers can be used independently, so unused channels should be configured according to the manufacturer's recommendations rather than left floating. This approach prevents unintended oscillation and reduces sensitivity to stray pickup.
A critical layout consideration is to separate the four high-impedance input paths from power-converter switches and digital return currents. When driving a capacitive load, add an isolation resistor close to the amplifier output and verify stability on the assembled board. The 14-pin SOIC footprint supports conventional leaded-assembly processes, while its wide temperature range supports demanding industrial environments.
This product overview connects the LM2902KDR's four-channel architecture, 26 V supply capability, 1.2 MHz bandwidth, 2 kV ESD rating, and temperature range with practical placement guidance, pin-compatible alternatives, and selection criteria for general-purpose analog designs.
ドロップイン代替品: LM2902KDR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LM2902KDR (同一形状・フットプリント) — 相違点: Package, Amplifier Type, Input Offset Voltage, Operating Temperature Range, Gain-Bandwidth Product.
LM2902DRE4
✅ ドロップイン価格はお問い合わせください
データシートを見る →LM2902KDG4
✅ ドロップイン価格はお問い合わせください
データシートを見る →LM2902KDR
✅ ドロップイン価格はお問い合わせください
データシートを見る →LM2902KDR 最大定格&電気的特性
| Amplifier Count | 4 circuits |
| Product Type | General-purpose operational amplifier |
| Maximum Supply Voltage | 26 V |
| Nominal Single-Supply Range | 3 V to 26 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Improved ESD Tolerance | 2 kV |
| 動作温度範囲 | -40°C to +125°C |
| Package Type | 14-pin SOIC |
| 実装タイプ | Surface mount |
| Channel Count | 4 |
| Supply Configuration | Single or dual supply |
| AEC-Q100 Qualification | Qualified |
LM2902KDR 14-pin soic ピン配置ガイド
LM2902KDR (14-pin soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: LM2902KDR.
詳細は データシート をご参照ください。
主な用途
LM2902KDR の用途: 6 件s: Industrial Sensor Signal Conditioning, Active Audio Preamplification, Power Supply Feedback Buffer, Active Filtering and Oscillator Circuits, Motor and Actuator Control Interfaces, General-Purpose Analog Signal Interface.
Industrial Sensor Signal Conditioning
The LM2902KDR is well suited to conditioning four low-frequency sensor channels in industrial control equipment because it combines four general-purpose amplifiers, a 1.2 MHz gain-bandwidth product, and operation from -40°C to +125°C. Each channel can amplify a sensor output, establish gain with feedback components, and provide impedance isolation before an ADC. The 26 V maximum supply rating also permits operation from protected industrial rails when the input and output voltages remain within the specified limits. High-impedance sensors require resistor values that account for input bias current, while noisy power systems benefit from local bypass capacitors and careful separation of analog inputs from switching currents.
おすすめ
Active Audio Preamplification
The LM2902KDR can implement four low-frequency preamplifier or buffer stages in audio equipment because its 1.2 MHz gain-bandwidth product is suitable for audio-band feedback networks. The four channels can support source buffers, tone-control stages, headphone-driver interfaces, or balanced-input signal conditioning. Its general-purpose architecture is appropriate where moderate bandwidth, low distortion, and inexpensive channel integration matter more than rail-to-rail output swing. Gain-setting resistors should be selected with the amplifier’s open-loop gain and frequency characteristics in mind, and the output must remain within the specified swing limits for the chosen single- or dual-supply voltage.
おすすめ
Power Supply Feedback Buffer
The LM2902KDR can serve as a buffer in power-supply feedback and remote-sensing systems where a high-impedance divider must be isolated from the power stage. A wide supply operating range and four independent channels allow separate buffers for output-voltage sensing, load sensing, and auxiliary rails in a compact 14-SOIC footprint. The 26 V maximum rating is useful around higher-voltage industrial systems, provided all amplifier pins remain within their absolute limits. Designers should keep feedback routing short, place the amplifier close to the sensed node, and account for input bias current and offset error when choosing high-value feedback resistors.
おすすめ
Active Filtering and Oscillator Circuits
The LM2902KDR is suitable for active filter and oscillator implementations that require several matched general-purpose amplifier channels. Its 1.2 MHz gain-bandwidth product provides useful bandwidth for low-frequency audio, control, and instrumentation networks, while the quad package reduces the number of components on the board. Each channel can form a first-order or second-order active filter section, and multiple sections can implement a higher-order response. Component tolerances and the amplifier’s gain-bandwidth behavior directly affect pole placement, so simulations should verify gain, phase margin, and output swing across the intended supply voltage and temperature range.
おすすめ
Motor and Actuator Control Interfaces
The LM2902KDR can condition current-sense, position, and actuator-command signals in industrial and automotive-adjacent control systems. Its four amplifiers allow independent scaling of multiple feedback signals, while operation from -40°C to +125°C supports designs expected to experience substantial temperature variation. The 26 V maximum supply rating can accommodate suitably protected 24 V industrial environments, although every input and output must remain within the datasheet’s operating limits. For motor systems, route sense-node signals away from motor-switching edges, use Kelvin-style connections where appropriate, and place supply bypassing close to the package.
おすすめ
General-Purpose Analog Signal Interface
The LM2902KDR works well as a general analog interface between sensors, logic levels, and downstream converters. Its four channels can combine comparators, unity-gain buffers, and fixed-gain stages in one 14-SOIC package. The 1.2 MHz bandwidth is sufficient for many slow industrial and control signals, while the 2 kV improved ESD rating adds robustness in connector-exposed applications. The amplifier is not a rail-to-rail precision device, so input common-mode range, output swing, offset, and bias current must be checked against the circuit. Unused channels should be tied to a defined bias voltage instead of being left open.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LM2902KDR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LM2902DRE4 | LM2902KDG4 | LM2902KDR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | ROHM Semiconductor |
| Package | 14-SOIC | 14-SOIC - same | 14-SOIC - same | 14-pin SOIC - same |
| Amplifier Count | 4 circuits | 4 channels | 4 channels | Quad operational amplifier |
| Product Type | General-purpose operational amplifier | Operational amplifier | Operational amplifier | General-purpose operational amplifier |
主な差別化要因
- Four general-purpose channels in one package (vs LM2902DRE4)
- Documented wide-temperature operation (vs LM2902DRE4)
- 1.2 MHz gain-bandwidth product (vs LM2902KDG4)
- Improved ESD protection (vs LM2902DRE4)
設計ノート
Place the supply bypass capacitor immediately adjacent to the LM2902KDR supply and ground pins, with a short return path to the package ground. High-impedance input traces should be kept away from switching-node copper and fast digital routes. Because all four amplifiers share the same package, a noisy channel can affect the others; preserve grounded separation between input, output, and power paths even when only one channel is used.
Do not allow input or output voltages to exceed the device’s common-mode and output-swing limits. The 26 V maximum supply rating is not a permission to operate every pin at 26 V relative to ground. In single-supply circuits, bias unused amplifier inputs at a defined voltage within the input range, and check the no-connection guidance in the current manufacturer datasheet before finalizing the schematic.
For high-impedance sources, calculate the error caused by input bias current flowing through the source and feedback impedances, and avoid unnecessarily large resistor values. Keep feedback loops compact to minimize parasitic coupling. If driving a capacitive load, add a small isolation resistor close to the output and verify settling and stability on the final layout, particularly when cable capacitance or long PCB traces are present.
Estimated: with a 12 V input, 5 V output, and 10 mA load, the ideal linear-regulator-style power dissipation in one amplifier channel would be approximately 70 mW using P = (12 V - 5 V) × 0.01 A. Actual package heating also depends on all four channels, adjacent circuitry, board copper, and ambient temperature. Validate the final design using the worst-case supply, load, and ambient conditions rather than relying on this estimate alone.
コンプライアンス情報
The LM2902KDR datasheet listing identifies AEC-Q100 qualification for automotive applications. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer documentation.