LM2902KDR - 26V 1.2MHz Quad Op Amp | Texas Instruments
料号: LM2902KDR ✓ 量产中LM2902KDR 概述
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs. The LM2902KDR contains four such amplifiers in one package, allowing a design to implement multiple gain stages, buffers, comparators, or active filters without using separate packages. In the broader electronics hierarchy, it belongs to the amplifier IC and general-purpose operational amplifier families, providing a practical combination of wide supply-voltage tolerance, low cost, and circuit versatility.
The device provides input-offset voltage and drift characteristics suitable for precision-enough general-purpose feedback networks, common-mode input range, output swing capability, and short-circuit-safe outputs. Its 1.2 MHz gain-bandwidth product supports low-frequency signal amplification and applications including sensor conditioning, active filtering, voltage buffering, and audio or control-signal interfaces. Improved ESD protection of 2 kV increases robustness in exposed connector and industrial environments, although normal handling precautions remain necessary.
Each amplifier uses standard complementary differential inputs and an output stage capable of driving common external loads within its specified output-swing limits. Designers should preserve adequate input/output voltage headroom from the supply rails and account for input bias-current effects when using high source impedances. Decoupling capacitors should be placed close to the supply pins, while sensitive analog inputs should be routed away from switching nodes and high-current return paths.
Typical uses include four-channel sensor interfaces, industrial control modules, audio preamplifier stages, active low-pass filters, motor and actuator signal conditioning, and general dual-supply analog circuits. The four amplifiers can be used independently, so unused channels should be configured according to the manufacturer's recommendations rather than left floating. This approach prevents unintended oscillation and reduces sensitivity to stray pickup.
A critical layout consideration is to separate the four high-impedance input paths from power-converter switches and digital return currents. When driving a capacitive load, add an isolation resistor close to the amplifier output and verify stability on the assembled board. The 14-pin SOIC footprint supports conventional leaded-assembly processes, while its wide temperature range supports demanding industrial environments.
This product overview connects the LM2902KDR's four-channel architecture, 26 V supply capability, 1.2 MHz bandwidth, 2 kV ESD rating, and temperature range with practical placement guidance, pin-compatible alternatives, and selection criteria for general-purpose analog designs.
直接替换替代料: LM2902KDR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LM2902KDR (相同外形与封装尺寸) ——差异在于 Package, Amplifier Type, Input Offset Voltage, Operating Temperature Range, Gain-Bandwidth Product.
LM2902DRE4
✅ 直接替换联系询价
查看数据手册 →LM2902KDG4
✅ 直接替换联系询价
查看数据手册 →LM2902KDR 最大额定值与电气特性
| Amplifier Count | 4 circuits |
| Product Type | General-purpose operational amplifier |
| Maximum Supply Voltage | 26 V |
| Nominal Single-Supply Range | 3 V to 26 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Improved ESD Tolerance | 2 kV |
| 工作温度范围 | -40°C to +125°C |
| Package Type | 14-pin SOIC |
| 安装类型 | Surface mount |
| Channel Count | 4 |
| Supply Configuration | Single or dual supply |
| AEC-Q100 Qualification | Qualified |
LM2902KDR 14-pin soic 引脚配置指南
LM2902KDR(14-pin soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: LM2902KDR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LM2902KDR 适用于 6 应用s: Industrial Sensor Signal Conditioning, Active Audio Preamplification, Power Supply Feedback Buffer, Active Filtering and Oscillator Circuits, Motor and Actuator Control Interfaces, General-Purpose Analog Signal Interface.
Industrial Sensor Signal Conditioning
The LM2902KDR is well suited to conditioning four low-frequency sensor channels in industrial control equipment because it combines four general-purpose amplifiers, a 1.2 MHz gain-bandwidth product, and operation from -40°C to +125°C. Each channel can amplify a sensor output, establish gain with feedback components, and provide impedance isolation before an ADC. The 26 V maximum supply rating also permits operation from protected industrial rails when the input and output voltages remain within the specified limits. High-impedance sensors require resistor values that account for input bias current, while noisy power systems benefit from local bypass capacitors and careful separation of analog inputs from switching currents.
推荐
Active Audio Preamplification
The LM2902KDR can implement four low-frequency preamplifier or buffer stages in audio equipment because its 1.2 MHz gain-bandwidth product is suitable for audio-band feedback networks. The four channels can support source buffers, tone-control stages, headphone-driver interfaces, or balanced-input signal conditioning. Its general-purpose architecture is appropriate where moderate bandwidth, low distortion, and inexpensive channel integration matter more than rail-to-rail output swing. Gain-setting resistors should be selected with the amplifier’s open-loop gain and frequency characteristics in mind, and the output must remain within the specified swing limits for the chosen single- or dual-supply voltage.
推荐
Power Supply Feedback Buffer
The LM2902KDR can serve as a buffer in power-supply feedback and remote-sensing systems where a high-impedance divider must be isolated from the power stage. A wide supply operating range and four independent channels allow separate buffers for output-voltage sensing, load sensing, and auxiliary rails in a compact 14-SOIC footprint. The 26 V maximum rating is useful around higher-voltage industrial systems, provided all amplifier pins remain within their absolute limits. Designers should keep feedback routing short, place the amplifier close to the sensed node, and account for input bias current and offset error when choosing high-value feedback resistors.
推荐
Active Filtering and Oscillator Circuits
The LM2902KDR is suitable for active filter and oscillator implementations that require several matched general-purpose amplifier channels. Its 1.2 MHz gain-bandwidth product provides useful bandwidth for low-frequency audio, control, and instrumentation networks, while the quad package reduces the number of components on the board. Each channel can form a first-order or second-order active filter section, and multiple sections can implement a higher-order response. Component tolerances and the amplifier’s gain-bandwidth behavior directly affect pole placement, so simulations should verify gain, phase margin, and output swing across the intended supply voltage and temperature range.
推荐
Motor and Actuator Control Interfaces
The LM2902KDR can condition current-sense, position, and actuator-command signals in industrial and automotive-adjacent control systems. Its four amplifiers allow independent scaling of multiple feedback signals, while operation from -40°C to +125°C supports designs expected to experience substantial temperature variation. The 26 V maximum supply rating can accommodate suitably protected 24 V industrial environments, although every input and output must remain within the datasheet’s operating limits. For motor systems, route sense-node signals away from motor-switching edges, use Kelvin-style connections where appropriate, and place supply bypassing close to the package.
推荐
General-Purpose Analog Signal Interface
The LM2902KDR works well as a general analog interface between sensors, logic levels, and downstream converters. Its four channels can combine comparators, unity-gain buffers, and fixed-gain stages in one 14-SOIC package. The 1.2 MHz bandwidth is sufficient for many slow industrial and control signals, while the 2 kV improved ESD rating adds robustness in connector-exposed applications. The amplifier is not a rail-to-rail precision device, so input common-mode range, output swing, offset, and bias current must be checked against the circuit. Unused channels should be tied to a defined bias voltage instead of being left open.
推荐
推荐产品汇总
工程参考数据: LM2902KDR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LM2902DRE4 | LM2902KDG4 | LM2902KDR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | ROHM Semiconductor |
| Package | 14-SOIC | 14-SOIC - same | 14-SOIC - same | 14-pin SOIC - same |
| Amplifier Count | 4 circuits | 4 channels | 4 channels | Quad operational amplifier |
| Product Type | General-purpose operational amplifier | Operational amplifier | Operational amplifier | General-purpose operational amplifier |
关键差异点
- Four general-purpose channels in one package (对比 LM2902DRE4)
- Documented wide-temperature operation (对比 LM2902DRE4)
- 1.2 MHz gain-bandwidth product (对比 LM2902KDG4)
- Improved ESD protection (对比 LM2902DRE4)
设计说明
Place the supply bypass capacitor immediately adjacent to the LM2902KDR supply and ground pins, with a short return path to the package ground. High-impedance input traces should be kept away from switching-node copper and fast digital routes. Because all four amplifiers share the same package, a noisy channel can affect the others; preserve grounded separation between input, output, and power paths even when only one channel is used.
Do not allow input or output voltages to exceed the device’s common-mode and output-swing limits. The 26 V maximum supply rating is not a permission to operate every pin at 26 V relative to ground. In single-supply circuits, bias unused amplifier inputs at a defined voltage within the input range, and check the no-connection guidance in the current manufacturer datasheet before finalizing the schematic.
For high-impedance sources, calculate the error caused by input bias current flowing through the source and feedback impedances, and avoid unnecessarily large resistor values. Keep feedback loops compact to minimize parasitic coupling. If driving a capacitive load, add a small isolation resistor close to the output and verify settling and stability on the final layout, particularly when cable capacitance or long PCB traces are present.
Estimated: with a 12 V input, 5 V output, and 10 mA load, the ideal linear-regulator-style power dissipation in one amplifier channel would be approximately 70 mW using P = (12 V - 5 V) × 0.01 A. Actual package heating also depends on all four channels, adjacent circuitry, board copper, and ambient temperature. Validate the final design using the worst-case supply, load, and ambient conditions rather than relying on this estimate alone.
合规信息
The LM2902KDR datasheet listing identifies AEC-Q100 qualification for automotive applications. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer documentation.