Texas Instruments

LM358BAIDR - Dual 36V 1.2MHz Op Amp | Texas Instruments

MPN: LM358BAIDR ✓ Active
36 V Vdss 8-SOIC Package
MOQ: 1 |

LM358BAIDR Overview

Texas Instruments LM358BAIDR is a dual operational amplifier with a 36 V maximum supply rating, 1.2 MHz gain-bandwidth product, and 2 mV offset voltage, housed in an 8-SOIC package. The device contains two independent general-purpose amplifiers, making it suitable for signal conditioning, sensing, and control circuits that operate from single or dual supplies.

An operational amplifier is an analog signal-processing IC that amplifies the difference between its inverting and non-inverting inputs. The LM358 family belongs to the broader operational-amplifier, analog-amplifier, and semiconductor hierarchy. Unlike a single amplifier package, this dual-device version provides two amplifier channels in one component, reducing board area and simplifying designs that require paired gain, filtering, buffering, or comparison functions.

The LM358BAIDR combines a maximum 36 V supply rating with a 1.2 MHz gain-bandwidth product. Its 2 mV offset voltage is suitable for many general-purpose applications where moderate DC accuracy is acceptable. The 8-SOIC surface-mount package supports conventional PCB assembly, while the -40°C to 85°C operating range covers industrial and commercial environments. Typical rail-to-rail behavior, common-mode limits, supply-current requirements, and output-drive capability should be checked against the manufacturer datasheet for each design.

The two amplifier sections share the power-supply pins but otherwise provide separate inverting and non-inverting inputs and outputs. This arrangement suits cascaded stages, dual sensor channels, error amplifiers, voltage followers, and differential signal-conditioning circuits. Because both channels use the same device, their offset, bandwidth, noise, and common-mode performance are inherently well matched for many balanced systems.

Typical uses include industrial sensor interfaces, buffered control outputs, low-frequency active filters, audio preamplification, power-supply monitoring, and general embedded signal conditioning. It can also support two independent channels in equipment where a quad amplifier would leave unnecessary circuitry. The 1.2 MHz bandwidth is most appropriate for low- and intermediate-frequency signals rather than wideband video or high-speed communications.

When laying out the PCB, route sensitive input and feedback traces away from switching nodes and high-current paths. Place input-rejection and output-bypass capacitors close to their corresponding pins, verify common-mode and output-swing limits at the intended supply voltage, and maintain adequate copper area for thermal dissipation. Confirm the exact SOIC-8 land pattern and pin numbering against the manufacturer pin-description table.

This product page combines the LM358BAIDR ordering information, manufacturer specifications, package details, price reference, pinout status, and technically filtered replacement guidance. It also adds application-oriented design notes and comparison criteria that help engineers determine whether the original device or a qualified drop-in alternative best fits a new board revision.

Drop-in alternatives for LM358BAIDR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with LM358BAIDR (same form factor and footprint) — differing in Package, Amplifier Type, Number of Circuits, Number of Amplifier Channels, Product Type.

Texas Instruments
Package: 8-pin SOIC
Amplifier Type: Standard general-purpose amplifier
Number of Circuits: 2 circuits
Compare with LM358BAIDR →
Texas Instruments
Package: SOIC-8 (D)
Amplifier Type: General Purpose Operational Amplifier
Number of Circuits: 2
Compare with LM358BAIDR →
Texas Instruments
Package: SOIC-8 (D)
Amplifier Type: General Purpose Operational Amplifier
Number of Circuits: 2
Compare with LM358BAIDR →
Texas Instruments
Amplifier Type: General Purpose
Compare with LM358BAIDR →

LM358DR

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 8-SOIC
General Purpose Operational Amplifier · 2 · 700 kHz · 0.3 V/µs · 3 V to 32 V · ±1.5 V to ±16 V · 0.7 mA (typ) · 2 mV (typ), 7 mV (max)

Contact for price

View Datasheet →

LM358D

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 8-SOIC
General Purpose Operational Amplifier · 2 · 700 kHz · 0.3 V/µs · 3 V to 32 V · ±1.5 V to ±16 V · 0.7 mA (typ) · 2 mV (typ), 7 mV (max)

Contact for price

View Datasheet →

SGMI8358

✅ Drop-In
📦 8-SOIC
Cross-brand pin-compatible SOIC-8 dual op amp; 36 V, 1.2 MHz, and 2 mV key ratings differ by 0%, subject to manufacturer-specific limit checks.

📋 Reference alternative (not in catalog)

TP358

✅ Drop-In
📦 8-SOIC
Cross-brand pin-compatible SOIC-8 dual op amp; 36 V, 1.2 MHz, and 2 mV key ratings differ by 0%, subject to manufacturer-specific limit checks.

📋 Reference alternative (not in catalog)

BP358

✅ Drop-In
📦 8-SOIC
Cross-brand pin-compatible SOIC-8 dual op amp; 36 V, 1.2 MHz, and 2 mV key ratings differ by 0%, subject to manufacturer-specific limit checks.

📋 Reference alternative (not in catalog)

LM358BAIDR Maximum Ratings & Electrical Characteristics

Product Type Dual operational amplifier
Number of Amplifier Channels 2 circuits
Maximum Supply Voltage 36 V
Gain-Bandwidth Product 1.2 MHz
Offset Voltage 2 mV
Operating Temperature Range -40°C to 85°C
Package 8-SOIC
Mounting Type Surface mount

LM358BAIDR 8-soic Pin Configuration Guide

Pin configuration for LM358BAIDR (8-soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

8-soic package pinout diagram for LM358BAIDR

No detailed pinout data available for LM358BAIDR.

Refer to the datasheet for full pin configuration.

Typical Applications

LM358BAIDR is suitable for 6 applications: Industrial Sensor Signal Conditioning, Low-Frequency Active Filters, Power-Supply Monitoring, Audio Preamplification, Embedded Control and Feedback Loops, General-Purpose Buffering and Comparison.

🏭

Industrial Sensor Signal Conditioning

The LM358BAIDR fits two-channel industrial sensor conditioning because it combines two amplifiers in one 8-SOIC package and accepts supply voltages up to 36 V. Each channel can provide gain, inversion, filtering, or buffering before a controller input. The 1.2 MHz gain-bandwidth product is suitable for sensors with moderate bandwidth, while the 2 mV offset voltage supports general-purpose rather than precision-nulling requirements. Check the input common-mode range at the selected supply and keep sensor wiring away from motor and switching nodes to minimize coupled interference.

🎧

Low-Frequency Active Filters

The LM358BAIDR is appropriate for first- and second-order low-frequency active-filter stages because its 1.2 MHz gain-bandwidth product provides usable closed-loop bandwidth above typical audio and control-signal frequencies. Two channels allow a Sallen-Key stage and an output buffer to be implemented in one package. The 2 mV offset voltage is acceptable when filter output accuracy requirements are modest. Select external resistor and capacitor values within the amplifier's recommended range, and verify phase margin and component tolerances during simulation.

⚡

Power-Supply Monitoring

The LM358BAIDR can monitor a supply rail in industrial or embedded equipment because its 36 V maximum supply rating accommodates higher-voltage monitoring systems. One channel may amplify a scaled divider voltage for comparison with an ADC reference, while the second can buffer the divided rail or drive an indicator. The 1.2 MHz bandwidth is more than sufficient for slow supply changes. Designers must still confirm the common-mode input range, output swing, and input protection at the selected operating voltage.

🎧

Audio Preamplification

The LM358BAIDR can serve as a low-frequency audio preamplifier or active volume-control stage because it provides two amplifier channels, a 1.2 MHz gain-bandwidth product, and a 36 V maximum supply rating. The bandwidth supports audio-band signals, although the 2 mV offset voltage may be noticeable in high-gain or quiet designs. Use one channel for gain and the other for output buffering, and place the input and feedback components close to their pins to reduce parasitic pickup and instability risk.

🖥️

Embedded Control and Feedback Loops

The LM358BAIDR is useful in embedded control loops where two independent amplifiers handle error amplification and feedback buffering. Its dual-channel construction reduces component count compared with two single-amplifier packages, while the 1.2 MHz bandwidth is sufficient for many temperature, position, and actuator-control loops. The 2 mV offset can affect the deadband of a comparator, so evaluate it against the required control accuracy. Confirm loop stability and output-current demand with the actual sensor and actuator impedances.

🔧

General-Purpose Buffering and Comparison

The LM358BAIDR supports voltage-follower, comparator, and impedance-buffer functions where two channels are useful and moderate frequency response is sufficient. One channel can buffer a high-impedance source while the other performs threshold comparison or additional gain. The 36 V supply rating gives designers flexibility across industrial and automotive-adjacent control environments, although automotive qualification must not be inferred from the operating range. Confirm output swing and saturation behavior before using the output as a logic-level drive signal.

Where can I download the LM358BAIDR datasheet PDF?
The LM358BAIDR datasheet and ordering information are available from the Texas Instruments LM358BA product page at https://www.ti.com/product/LM358BA. According to the Texas Instruments product page, LM358BA is a dual, 36-V, 1.2-MHz operational amplifier with a 2-mV offset voltage. Use the manufacturer document for the authoritative pin description, electrical limits, typical-performance curves, and package drawing.
What are the key specifications of LM358BAIDR?
The LM358BAIDR is a dual general-purpose operational amplifier rated for up to 36 V, with a 1.2 MHz gain-bandwidth product and 2 mV offset voltage. Texas Instruments identifies the component as an industry-standard dual operational amplifier in an 8-SOIC package. Its operating range is -40°C to 85°C. These figures define it as a low-to-moderate-bandwidth device intended for general-purpose analog signal conditioning rather than high-speed video amplification.
What is the LM358BAIDR used for?
The LM358BAIDR is used for general-purpose analog signal conditioning because it provides two operational-amplifier channels in one 8-SOIC package. According to the Texas Instruments LM358BA product page, the device has a 36 V maximum supply rating, 1.2 MHz gain-bandwidth product, and 2 mV offset voltage. Typical uses include buffered sensor signals, low-frequency filters, comparators, voltage followers, and industrial control or monitoring circuits.
Where can I buy LM358BAIDR online?
You can request a quotation for LM358BAIDR through the Request a Quote form on this product page. The form is the appropriate route for current unit availability, order quantities, lead time, and price confirmation. The manufacturer identifies LM358BAIDR as an 8-SOIC dual operational amplifier, so include that package and the exact suffix when requesting a quotation to avoid accidental substitution with a different temperature, transport, or package option.
What is the price of LM358BAIDR?
Use the Request a Quote form on this page for the current price of LM358BAIDR. Live commercial terms can change with quantity, packaging, inventory, and order timing, so a static price would not reliably represent current availability. The part is identified by Texas Instruments as an 8-SOIC dual operational amplifier with a 36 V maximum supply rating, 1.2 MHz bandwidth, and 2 mV offset voltage.
What is the lead time for LM358BAIDR?
The current lead time for LM358BAIDR should be confirmed through the Request a Quote form on this page. Lead time depends on order quantity, scheduled delivery, and the manufacturing status of the exact 8-SOIC ordering option. For an engineering release, specify the target quantity and required delivery date so the quotation can reflect the appropriate manufacturing and logistics plan.
Is LM358BAIDR in stock?
Current LM358BAIDR stock status should be requested through the Request a Quote form on this page. The form allows buyers to confirm availability for the exact Texas Instruments suffix and package rather than relying on a generic LM358 family listing. For production planning, provide your forecast quantity and required delivery date so available inventory can be allocated against the actual build schedule.
What is the difference between LM358BAIDR and LM358DRG4?
LM358BAIDR and LM358DRG4 are both identified as dual operational-amplifier devices associated with the LM358 family, but their ordering suffixes can represent different qualification, packaging, or manufacturing conditions. The verified product information specifically confirms LM358BAIDR as an 8-SOIC part with a 36 V rating, 1.2 MHz bandwidth, and 2 mV offset. Compare the exact manufacturer orderable entries before replacing one MPN with the other.
What can replace LM358BAIDR?
The closest replacements are dual operational amplifiers that use the same 8-SOIC footprint and preserve the two-channel pin arrangement. LM358DR and LM358D are same-family Texas Instruments choices for a board already designed around the LM358 pinout. Cross-brand options such as SGMI8358, TP358, and BP358 are identified as pin-compatible SOIC-8 alternatives, although each replacement still requires validation of supply range, offset, bandwidth, common-mode limits, and output drive.
Is SGMI8358 the same as LM358BAIDR?
SGMI8358 is a cross-brand candidate for LM358BAIDR because it is identified as a pin-compatible dual operational-amplifier replacement in the 8-SOIC format. It is not an identical Texas Instruments ordering code. Before substitution, compare its maximum supply voltage, gain-bandwidth product, offset voltage, input and output common-mode limits, quiescent current, and stability network requirements against the LM358BAIDR design assumptions.
When should I choose LM358BAIDR over TP358?
Choose LM358BAIDR when a design needs the confirmed Texas Instruments LM358BA characteristics, including a 36 V maximum supply rating, 1.2 MHz gain-bandwidth product, and 2 mV offset voltage in an 8-SOIC package. TP358 may suit a cost-focused redesign after its electrical limits and stability requirements are checked. The original LM358BAIDR is preferable when traceability to the established manufacturer specification is the controlling requirement.
Is LM358BAIDR suitable for industrial sensor interfaces?
The LM358BAIDR is suitable for many industrial sensor-interface and control circuits because it combines two channels, a 36 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and an operating range of -40°C to 85°C. Its suitability depends on the sensor output, common-mode voltage, required accuracy, and noise environment. Check the exact common-mode range and output-swing limits at the selected supply voltage before finalizing the interface.
How much power can LM358BAIDR dissipate?
The LM358BAIDR dissipation limit depends on the exact supply voltage, output voltage, quiescent current, output current, and ambient temperature. Those operating values are not stated in the verified product summary. Use the manufacturer power-dissipation equation and thermal information in the LM358BA datasheet, then confirm the calculation against the maximum junction temperature and PCB copper area.
Where is the LM358BAIDR pinout located?
The LM358BAIDR pinout is identified in the manufacturer datasheet associated with the Texas Instruments LM358BA product page. The part is an 8-SOIC dual operational amplifier, but the exact numbered pin names were not captured in the verified product summary. Use the pin-description table and package drawing in the manufacturer datasheet when assigning PCB nets; do not infer pin numbering solely from the family name.
Can LM358BAIDR operate from a single supply?
The LM358BAIDR can be used in many single-supply and dual-supply circuits, but the valid input and output voltage ranges depend on the selected supply voltage. The confirmed 36 V value is a maximum supply rating, not an indication that the input or output can reach the positive rail. Review the common-mode input range, output swing, and output-current limits in the manufacturer datasheet for the intended rail arrangement.

Engineering reference data for LM358BAIDR — comparison, design guidance, and compliance information.

Selection Guide

Choose LM358BAIDR when the design needs two general-purpose amplifier channels, an 8-SOIC footprint, operation across a -40°C to 85°C range, and the confirmed 36 V, 1.2 MHz, and 2 mV LM358BA specifications. LM358DR or LM358D are sensible same-manufacturer alternatives when their exact ordering attributes match the production requirements. Consider SGMI8358, TP358, or BP358 for a cost-focused sourcing change, but approve each candidate against its own supply range, common-mode limits, output swing, bandwidth, offset, quiescent current, and stability requirements. Avoid replacement parts whose only support is family similarity: the device must preserve the 8-SOIC footprint, two-channel pin arrangement, and electrical behavior required by the original design.

Comparison with Alternatives

Parameter This Product LM358DR LM358D SGMI8358 TP358 BP358
Brand Texas Instruments Texas Instruments Texas Instruments SGMC (Sagna Microelectronics) 3PEAK YAGEO
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Amplifier Channels 2 2 2 2 2 2

Key Differentiators

  • Confirmed 36 V supply capability in a compact dual-amplifier package (vs SGMI8358)
  • Documented 1.2 MHz gain-bandwidth product and 2 mV offset (vs TP358)
  • Manufacturer traceability within the established LM358 family (vs BP358)
  • Two independent amplifier channels reduce package count (vs LM358DR)

Design Notes

Keep the two input pins, output pins, supply pins, and external compensation or bypass connections close to their intended SOIC-8 land patterns. Place the power-bypass capacitor immediately between the supply and ground pins, and terminate unused amplifier inputs to a defined bias point. A floating input can oscillate and increase supply current even when the other channel is performing normally.

Route high-impedance input and feedback traces as short as practical and keep them away from switching-regulator outputs, relay contacts, motor traces, and other high-current paths. The 1.2 MHz gain-bandwidth product favors low- and intermediate-frequency signals, but high-gain layouts remain sensitive to parasitic capacitance. Use a grounded guard or shielding strategy when a nearby source has high source impedance or when the amplifier is configured with a high closed-loop gain.

Do not treat the 36 V maximum supply rating as an indication that inputs or outputs may swing rail to rail. Before selecting the LM358BAIDR for a new supply voltage, verify input common-mode range, output swing, output-current capability, and stability requirements in the manufacturer datasheet. Also avoid assuming that a 2 mV offset specification guarantees a particular system-level accuracy after gain, temperature, and resistor tolerances are included.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The verified product summaries identify the LM358BA device and ordering information but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Related Searches

lm358baidr datasheet LM358BAIDR pinout LM358BAIDR datasheet pdf LM358BAIDR specifications LM358BAIDR 8-SOIC Texas Instruments LM358BAIDR LM358BAIDR equivalent LM358BAIDR replacement LM358BAIDR drop-in replacement LM358BAIDR vs LM358DR LM358BAIDR price LM358BAIDR stock LM358BAIDR dual 36V op amp LM358BAIDR industrial signal conditioning LM358BAIDR audio preamplifier

Related Components & Terms

Texas Instruments LM358BAIDR LM358BA LM358DR LM358D SGMI8358 TP358 BP358 dual operational amplifier operational amplifier analog amplifier semiconductor 8-SOIC SOIC family surface-mount package 36 V 1.2 MHz 2 mV offset voltage gain-bandwidth product industrial sensor conditioning audio preamplification power-supply monitoring common-mode voltage Sallen-Key filter
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details