LM358BAIDR - Dual 36V 1.2MHz Op Amp | Texas Instruments
MPN: LM358BAIDR ✓ NakahandaLM358BAIDR Ulas
An operational amplifier is an analog signal-processing IC that amplifies the difference between its inverting and non-inverting inputs. The LM358 family belongs to the broader operational-amplifier, analog-amplifier, and semiconductor hierarchy. Unlike a single amplifier package, this dual-device version provides two amplifier channels in one component, reducing board area and simplifying designs that require paired gain, filtering, buffering, or comparison functions.
The LM358BAIDR combines a maximum 36 V supply rating with a 1.2 MHz gain-bandwidth product. Its 2 mV offset voltage is suitable for many general-purpose applications where moderate DC accuracy is acceptable. The 8-SOIC surface-mount package supports conventional PCB assembly, while the -40°C to 85°C operating range covers industrial and commercial environments. Typical rail-to-rail behavior, common-mode limits, supply-current requirements, and output-drive capability should be checked against the manufacturer datasheet for each design.
The two amplifier sections share the power-supply pins but otherwise provide separate inverting and non-inverting inputs and outputs. This arrangement suits cascaded stages, dual sensor channels, error amplifiers, voltage followers, and differential signal-conditioning circuits. Because both channels use the same device, their offset, bandwidth, noise, and common-mode performance are inherently well matched for many balanced systems.
Typical uses include industrial sensor interfaces, buffered control outputs, low-frequency active filters, audio preamplification, power-supply monitoring, and general embedded signal conditioning. It can also support two independent channels in equipment where a quad amplifier would leave unnecessary circuitry. The 1.2 MHz bandwidth is most appropriate for low- and intermediate-frequency signals rather than wideband video or high-speed communications.
When laying out the PCB, route sensitive input and feedback traces away from switching nodes and high-current paths. Place input-rejection and output-bypass capacitors close to their corresponding pins, verify common-mode and output-swing limits at the intended supply voltage, and maintain adequate copper area for thermal dissipation. Confirm the exact SOIC-8 land pattern and pin numbering against the manufacturer pin-description table.
This product page combines the LM358BAIDR ordering information, manufacturer specifications, package details, price reference, pinout status, and technically filtered replacement guidance. It also adds application-oriented design notes and comparison criteria that help engineers determine whether the original device or a qualified drop-in alternative best fits a new board revision.
Mga alternatibo na pwedeng ilagay na LM358BAIDR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok LM358BAIDR (parehas na form factor at footprint) — pagkakaiba sa Package, Amplifier Type, Number of Circuits, Number of Amplifier Channels, Product Type.
LM358DR
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →LM358D
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →SGMI8358
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
TP358
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
BP358
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LM358BAIDR Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Dual operational amplifier |
| Number of Amplifier Channels | 2 circuits |
| Maximum Supply Voltage | 36 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Offset Voltage | 2 mV |
| Hanay ng Temperature na Operasyon | -40°C to 85°C |
| Packhaging | 8-SOIC |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng LM358BAIDR 8-soic
Pin configuration para sa LM358BAIDR (8-soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa LM358BAIDR.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LM358BAIDR ay nararapat para sa 6 aplikasyons: Industrial Sensor Signal Conditioning, Low-Frequency Active Filters, Power-Supply Monitoring, Audio Preamplification, Embedded Control and Feedback Loops, General-Purpose Buffering and Comparison.
Industrial Sensor Signal Conditioning
The LM358BAIDR fits two-channel industrial sensor conditioning because it combines two amplifiers in one 8-SOIC package and accepts supply voltages up to 36 V. Each channel can provide gain, inversion, filtering, or buffering before a controller input. The 1.2 MHz gain-bandwidth product is suitable for sensors with moderate bandwidth, while the 2 mV offset voltage supports general-purpose rather than precision-nulling requirements. Check the input common-mode range at the selected supply and keep sensor wiring away from motor and switching nodes to minimize coupled interference.
Inirekomenda
Low-Frequency Active Filters
The LM358BAIDR is appropriate for first- and second-order low-frequency active-filter stages because its 1.2 MHz gain-bandwidth product provides usable closed-loop bandwidth above typical audio and control-signal frequencies. Two channels allow a Sallen-Key stage and an output buffer to be implemented in one package. The 2 mV offset voltage is acceptable when filter output accuracy requirements are modest. Select external resistor and capacitor values within the amplifier's recommended range, and verify phase margin and component tolerances during simulation.
Inirekomenda
Power-Supply Monitoring
The LM358BAIDR can monitor a supply rail in industrial or embedded equipment because its 36 V maximum supply rating accommodates higher-voltage monitoring systems. One channel may amplify a scaled divider voltage for comparison with an ADC reference, while the second can buffer the divided rail or drive an indicator. The 1.2 MHz bandwidth is more than sufficient for slow supply changes. Designers must still confirm the common-mode input range, output swing, and input protection at the selected operating voltage.
Inirekomenda
Audio Preamplification
The LM358BAIDR can serve as a low-frequency audio preamplifier or active volume-control stage because it provides two amplifier channels, a 1.2 MHz gain-bandwidth product, and a 36 V maximum supply rating. The bandwidth supports audio-band signals, although the 2 mV offset voltage may be noticeable in high-gain or quiet designs. Use one channel for gain and the other for output buffering, and place the input and feedback components close to their pins to reduce parasitic pickup and instability risk.
Inirekomenda
Embedded Control and Feedback Loops
The LM358BAIDR is useful in embedded control loops where two independent amplifiers handle error amplification and feedback buffering. Its dual-channel construction reduces component count compared with two single-amplifier packages, while the 1.2 MHz bandwidth is sufficient for many temperature, position, and actuator-control loops. The 2 mV offset can affect the deadband of a comparator, so evaluate it against the required control accuracy. Confirm loop stability and output-current demand with the actual sensor and actuator impedances.
Inirekomenda
General-Purpose Buffering and Comparison
The LM358BAIDR supports voltage-follower, comparator, and impedance-buffer functions where two channels are useful and moderate frequency response is sufficient. One channel can buffer a high-impedance source while the other performs threshold comparison or additional gain. The 36 V supply rating gives designers flexibility across industrial and automotive-adjacent control environments, although automotive qualification must not be inferred from the operating range. Confirm output swing and saturation behavior before using the output as a logic-level drive signal.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LM358BAIDR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LM358DR | LM358D | SGMI8358 | TP358 | BP358 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | SGMC (Sagna Microelectronics) | 3PEAK | YAGEO |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Amplifier Channels | 2 | 2 | 2 | 2 | 2 | 2 |
Pangunahing mga Pagkakaiba
- Confirmed 36 V supply capability in a compact dual-amplifier package (kumpara saSGMI8358)
- Documented 1.2 MHz gain-bandwidth product and 2 mV offset (kumpara saTP358)
- Manufacturer traceability within the established LM358 family (kumpara saBP358)
- Two independent amplifier channels reduce package count (kumpara saLM358DR)
Talaan ng Disenyo
Keep the two input pins, output pins, supply pins, and external compensation or bypass connections close to their intended SOIC-8 land patterns. Place the power-bypass capacitor immediately between the supply and ground pins, and terminate unused amplifier inputs to a defined bias point. A floating input can oscillate and increase supply current even when the other channel is performing normally.
Route high-impedance input and feedback traces as short as practical and keep them away from switching-regulator outputs, relay contacts, motor traces, and other high-current paths. The 1.2 MHz gain-bandwidth product favors low- and intermediate-frequency signals, but high-gain layouts remain sensitive to parasitic capacitance. Use a grounded guard or shielding strategy when a nearby source has high source impedance or when the amplifier is configured with a high closed-loop gain.
Do not treat the 36 V maximum supply rating as an indication that inputs or outputs may swing rail to rail. Before selecting the LM358BAIDR for a new supply voltage, verify input common-mode range, output swing, output-current capability, and stability requirements in the manufacturer datasheet. Also avoid assuming that a 2 mV offset specification guarantees a particular system-level accuracy after gain, temperature, and resistor tolerances are included.
Impormasyon ng Pagsunod sa Kautusan
The verified product summaries identify the LM358BA device and ordering information but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.