Analog Devices

MAX301CSE+ - Dual SPST 35Ω Analog Switch | Analog Devices

MPN: MAX301CSE+ ✓ Active
35 ohm Rds(on) SOIC-16 (CSE, narrow body) Package High-Speed Speed
MOQ: 1 |

MAX301CSE+ Overview

The Analog Devices (Maxim Integrated) MAX301CSE+ is a precision, dual, high-speed analog switch containing two independent single-pole single-throw (SPST) normally-open (NO) switch channels in a 16-pin SOIC package. Each channel offers a maximum on-resistance of 35 ohms, guaranteed to match within 2 ohms between channels, making it suitable for precision signal routing where channel-to-channel consistency matters.

A precision analog switch is a type of bidirectional signal gate within the broader family of analog switches and multiplexers (signal routing ICs within data converters and interface signal chains). Unlike a relay, a solid-state CMOS analog switch switches microsecond-fast with no moving parts, and unlike a digital logic gate, it passes continuous analog signals in both directions with minimal distortion. Switches sit between multiplexers (many channels to one) and simple gates, and are fundamental building blocks of signal conditioning, test, and communication systems.

Key features of the MAX301 include low on-resistance (less than 35 ohms guaranteed), channel matching within 2 ohms for gain-consistent switching, high-speed switching for fast signal paths, and a dual-channel SPST NO configuration that lets two independent signals share one IC. The '+' suffix denotes Analog Devices' enhanced (lead-free, RoHS-compliant) manufacturing flow.

Architecturally, the MAX301 family uses CMOS switch technology with logic-controlled gate drive, providing flat on-resistance across the analog signal range and low charge injection. The normally-open configuration ensures signals are isolated by default and only connected when the control logic commands it, which is the safe default for test equipment, redundant signal paths, and fault-tolerant routing.

Typical applications include audio and video signal routing, precision test and measurement switching matrices, communication-system signal gating, data-acquisition channel isolation, and industrial control signal selection. The dual-channel layout is efficient for stereo signal pairs, differential-pair gating, and redundant-path designs where two switches switch simultaneously or independently.

When designing with the MAX301CSE+, keep switch on-resistance in mind when driving low-impedance loads, since 35 ohms in series can introduce gain error in precision dividers. Consult the manufacturer datasheet for supply-voltage ranges, switching-time specifications, and control-logic thresholds before finalizing the design.

This page synthesizes distributor availability listings, family cross-reference information, and practical design notes not found in a single manufacturer document, making it a one-stop engineering reference for the MAX301CSE+.

Drop-in alternatives for MAX301CSE+ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

MAX301ESE+

✅ Drop-In
📦 SOIC-16
identical die and pinout, extended temperature grade (-40C to +85C) vs commercial (0C to +70C)

📋 Reference alternative (not in catalog)

MAX305CSE+

✅ Drop-In
📦 SOIC-16
DPST normally-open configuration instead of 2 x SPST NO; same 35 ohm on-resistance family, same package, pole wiring differs

📋 Reference alternative (not in catalog)

MAX303CSE+

✅ Drop-In
📦 SOIC-16
SPDT configuration (two NO and two NC poles) vs dual SPST NO; same 35 ohm family specs and package

📋 Reference alternative (not in catalog)

MAX301CSE+ Maximum Ratings & Electrical Characteristics

Switch Configuration 2 x SPST (Normally Open)
Number of Channels 2
On-Resistance (Max) 35 ohm
On-Resistance Matching 2 ohm (max, channel-to-channel)
Switch Type Analog Switch
Switching Speed Class High-Speed
Operating Temperature Range 0C to +70C (commercial grade, C suffix)
Package SOIC-16 (CSE, narrow body)
Number of Terminals 16
Mounting Type Surface Mount (SMD/SMT)
Package Shape Rectangular (SOP family)
RoHS Status Compliant (+ suffix, lead-free enhanced flow)
Lifecycle Status Production (per Analog Devices product page)

MAX301CSE+ rectangular (sop family) Pin Configuration Guide

Pin configuration for MAX301CSE+ (rectangular (sop family) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

rectangular (sop family) package pinout diagram for MAX301CSE+

No detailed pinout data available for MAX301CSE+.

Refer to the datasheet for full pin configuration.

Typical Applications

MAX301CSE+ is suitable for 6 applications: Audio and Video Signal Routing, Automated Test Equipment Switch Matrices, Data Acquisition Channel Isolation, Communication System Signal Gating, Industrial Control Signal Selection, Precision Signal Conditioning and Gain Switching.

🎧

Audio and Video Signal Routing

The MAX301CSE+ fits audio and video source-selection designs because its two independent SPST normally-open channels can gate a stereo pair with guaranteed 2-ohm channel-to-channel matching, preserving balance between left and right paths. Its sub-35-ohm on-resistance introduces minimal insertion loss into high-impedance line-level loads, and high-speed switching supports fast source changes. In practice the switch sits between source connectors and the preamplifier input, with control logic toggling the normally-open channels only during a selected source window. The main trade-off versus a relay is the series on-resistance and lower voltage handling, which is acceptable for line-level signals but requires care at speaker-level or high-voltage video lines.

🔧

Automated Test Equipment Switch Matrices

In automated test equipment, the MAX301CSE+ serves as a signal gating element in switch matrices where default isolation matters: the normally-open channels disconnect devices-under-test until the control logic explicitly closes a path. The guaranteed 35-ohm maximum on-resistance with 2-ohm channel matching keeps measurement paths repeatable between channels, improving calibration consistency across a matrix. High-speed switching shortens test-cycle times versus electromechanical relays, and the solid-state construction eliminates contact wear. Designers should budget the series on-resistance into low-resistance measurement paths and verify datasheet leakage and charge-injection figures against the sensitivity of the instrumentation connected to the matrix.

🖥️

Data Acquisition Channel Isolation

Data-acquisition front ends use the MAX301CSE+ to isolate sensor inputs from the ADC or amplifier stage until sampling is required. The normally-open default prevents floating or noisy sources from loading shared nodes, and the low, well-matched on-resistance keeps channel-to-channel gain consistent across the acquisition system. Because the switch is bidirectional and passes continuous analog signals, it handles both sensor excitation routing and signal return paths. The key design consideration is settling time: the RC formed by the 35-ohm on-resistance with cable and sample-capacitance must be allowed to settle before conversion, so switch timing must be coordinated with the ADC sampling clock for full accuracy.

🌐

Communication System Signal Gating

The MAX301CSE+ gates signals in communication equipment, including transmitter enable paths, redundant-channel selection, and receive-chain isolation. Its high-speed switching supports fast keying and gating operations, while the normally-open configuration guarantees that an unpowered or unaddressed channel remains disconnected, a safety benefit in RF and data systems. The 2-ohm channel matching is valuable in balanced or paired signal paths common in data communication hardware. Designers should verify the datasheet bandwidth and switching-time specifications against the signal frequencies involved and place the switch close to the gating point to minimize stub effects on the signal path.

🏭

Industrial Control Signal Selection

Industrial controllers use the MAX301CSE+ to select between sensor outputs or control-signal sources without mechanical relays. The solid-state switch delivers microsecond-fast, wear-free switching that survives millions of operations, and the normally-open default ensures that an idle or faulted input is isolated from the controller input. With commercial 0C to +70C rating, it suits enclosed control cabinets and indoor installations; for plant-floor environments that experience sub-zero temperatures, the pin-compatible MAX301ESE+ extended-grade variant drops onto the identical footprint with no PCB change. Verify the datasheet supply-voltage and signal-range limits against sensor output levels before finalizing the interface.

🔧

Precision Signal Conditioning and Gain Switching

Instrumentation front ends use the MAX301CSE+ to switch gain-setting resistors or filter stages in precision signal-conditioning chains. The guaranteed 2-ohm channel matching and low 35-ohm on-resistance limit the error contribution when switching resistive networks, provided the switched resistances are large relative to the on-resistance (for example, 3.5 kohm or higher for below-1% error). The dual-channel layout lets designers switch a differential pair with matched behavior, reducing common-mode conversion errors. For maximum accuracy, calibrate or choose resistor values an order of magnitude above the on-resistance, and confirm charge-injection transients from the datasheet do not disturb the conditioning amplifier.

Recommended Products Summary

MAX303CSE+ SPDT variant from the same family for changeover routing Used in: Audio and Video Signal Routing MAX305CSE+ DPST variant for paired-conductor switching Used in: Audio and Video Signal Routing, Communication System Signal Gating MAX301ESE+ Extended-temperature variant for wider-range test environments Used in: Automated Test Equipment Switch Matrices, Industrial Control Signal Selection DG444DJ+ Analog Devices Used in: Automated Test Equipment Switch Matrices AK5383VS TI Used in: Data Acquisition Channel Isolation AK5522VN AKM (Asahi Kasei Microdevices) Used in: Data Acquisition Channel Isolation DG419DY+ Analog Devices Used in: Communication System Signal Gating DG408DY+ Analog Devices Used in: Industrial Control Signal Selection TS922AID STMicroelectronics Used in: Precision Signal Conditioning and Gain Switching TS974IDT STMicroelectronics Used in: Precision Signal Conditioning and Gain Switching
What is the MAX301CSE+ analog switch?
The MAX301CSE+ is a precision, dual, high-speed analog switch from Analog Devices (originally Maxim Integrated) that integrates two independent SPST normally-open switch channels in a 16-pin SOIC package. According to the Analog Devices MAX301 product page, the family offers low on-resistance of less than 35 ohms, guaranteed to match within 2 ohms between channels, making it well suited for precision signal routing in test, audio, video, and data-acquisition systems.
What is the on-resistance of the MAX301CSE+?
The MAX301CSE+ has a guaranteed maximum on-resistance of less than 35 ohms per switch channel, with channel-to-channel matching guaranteed within 2 ohms. According to the Analog Devices MAX301 family documentation, this matching specification is critical for designs where two channels must behave identically, such as stereo audio switching or differential signal gating, because mismatched on-resistance would create gain or balance errors between the two signal paths.
What is the difference between MAX301 and MAX303 and MAX305?
The MAX301 is a dual SPST (single-pole single-throw) normally-open switch, the MAX303 is an SPDT (single-pole double-throw) switch with two NO and two NC poles, and the MAX305 is a DPST (double-pole single-throw) normally-open switch. According to Analog Devices, all three offer low on-resistance (less than 35 ohms) matched to within 2 ohms between channels. They share the same family architecture and packages, so choose based on the switching topology your circuit requires.
What is the difference between MAX301CSE+ and MAX301ESE+?
Both parts are the same dual SPST normally-open analog switch die in the same 16-pin SOIC package; the difference is the operating temperature grade. The MAX301CSE+ is the commercial-grade version rated for 0C to +70C, while the MAX301ESE+ is the extended/industrial-grade version rated down to -40C. Use the CSE variant for indoor commercial equipment and the ESE variant for industrial or outdoor environments where temperatures below 0C occur.
Is the MAX301CSE+ a normally-open or normally-closed switch?
The MAX301CSE+ contains two normally-open (NO) SPST switch channels, meaning the signal path is disconnected when no control signal is applied. According to the Analog Devices MAX301 family description, this NO default is valuable in test equipment and redundant signal-path designs, because the switch isolates signals by default and only connects them when the logic control actively commands it, improving fault tolerance and reducing unintended signal leakage.
Where can I download the MAX301CSE+ datasheet PDF?
The MAX301CSE+ datasheet is available as a PDF download from the Analog Devices MAX301 product page at analog.com, which links the current Precision, Dual, High-Speed Analog Switches data sheet revision along with product selection tables and ordering information. Download the datasheet before layout, since it contains the pin-configuration diagram, control-logic thresholds, switching-time graphs, and supply-voltage ranges needed to finalize your design.
What is the operating temperature range of the MAX301CSE+?
The MAX301CSE+ is rated for a commercial operating temperature range of 0C to +70C, indicated by the 'C' grade letter in the part number. If your application must operate below 0C, such as in industrial instrumentation or outdoor equipment, select the MAX301ESE+ extended-grade variant instead, which is pin-compatible, functionally identical, and carries a wider temperature rating in the same SOIC-16 package.
Where can I buy MAX301CSE+ and what is its price?
MAX301CSE+ is stocked by major authorized electronics distributors and can be purchased through the Request a Quote form on this page, which returns current pricing, stock, and lead time directly. The Analog Devices product page lists a 1000-unit list price starting from $4.66 per unit for the MAX301 family as a reference; final pricing varies with quantity, packaging (tape-and-reel versus tube), and current distributor inventory, so request a quote for an accurate, up-to-date figure.
Is MAX301CSE+ in stock and what is the lead time?
Major distributors list the MAX301CSE+ as a buyable, actively produced part, and DigiKey listings state 'buy now, ships today' for this component, indicating same-day shipping when stock is on hand. Because distributor stock levels change daily, the most reliable way to confirm current availability and lead time for your required quantity is to submit the Request a Quote form on this page. The manufacturer lists the MAX301 family under PRODUCTION status, so ongoing supply is supported.
What is the best drop-in replacement for MAX301CSE+?
The best drop-in replacement for the MAX301CSE+ is the MAX301ESE+ from Analog Devices, which uses the identical die, identical SOIC-16 pinout, and identical 35-ohm on-resistance specification, differing only in temperature grade (extended versus commercial). This makes it pin-to-pin replaceable on the same PCB footprint. No cross-brand pin-compatible equivalent for this specific precision dual SPST switch was identified in published cross-reference listings, so staying within the MAX301 family is the safest substitution path.
Is the MAX301CSE+ RoHS compliant and lead-free?
Yes, the MAX301CSE+ is RoHS compliant and lead-free. The '+' suffix in the part number denotes Analog Devices' enhanced manufacturing flow, which indicates a lead-free, RoHS-compliant version of the device. Distributor listings and the manufacturer product page both carry this suffixed ordering code for new production, so designs requiring RoHS or REACH compliance can specify the MAX301CSE+ directly without seeking a separate lead-free variant.
Is the MAX301CSE+ suitable for audio signal switching?
Yes, the MAX301CSE+ is well suited to audio signal routing because its two SPST channels can independently gate left and right audio signals, and its guaranteed 2-ohm channel matching preserves stereo balance. With on-resistance below 35 ohms, insertion loss into typical line-level loads (10k ohm or higher) is small, and the high-speed switching supports click-free source selection when combined with appropriate muting during transitions. Consult the datasheet for charge-injection figures relevant to click performance.
Can I use the MAX301CSE+ in a test and measurement switching matrix?
Yes, the MAX301CSE+ is a good fit for test and measurement switching matrices because normally-open SPST channels provide default isolation, the 35-ohm maximum on-resistance is low and well-matched (2-ohm channel matching), and high-speed switching supports fast automated test sequences. Its commercial 0C to +70C temperature grade covers typical bench and rack environments; for extended-range instruments, substitute the pin-compatible MAX301ESE+ without changing the PCB layout.
What are the key specifications of MAX301CSE+ engineers should know?
The MAX301CSE+ is a dual SPST normally-open precision analog switch in SOIC-16 with a maximum on-resistance of 35 ohms, channel matching of 2 ohms, high-speed switching, commercial 0C to +70C operation, and RoHS-compliant lead-free construction (the '+' suffix). According to Analog Devices, the MAX301/MAX303/MAX305 family is guaranteed for low on-resistance matched within 2 ohms, which is the headline parameter distinguishing this precision switch family from generic analog switches.
How should I design the PCB layout for the MAX301CSE+?
Place the MAX301CSE+ close to the signal sources and loads it gates, keep analog signal traces short and routed away from clock or switching-regulator nets, and provide low-impedance decoupling on the supply pins with ceramic capacitors placed directly at the pins. Because the switch on-resistance of up to 35 ohms sits in series with the signal path, account for it in precision gain calculations and avoid driving low-impedance loads through the switch. Follow the manufacturer datasheet pin-configuration diagram when assigning PCB tracks.
Is the MAX301CSE+ still in production?
Yes, the MAX301CSE+ is an active part. The Analog Devices product page lists the MAX301 family under PRODUCTION lifecycle status with current data sheet revision 1 and active sample-and-buy ordering options. Multiple authorized distributors, including DigiKey and Mouser, carry live inventory and list the part as orderable with same-day shipping in many regions, so new designs can adopt this component with confidence in ongoing supply.

Engineering reference data for MAX301CSE+ — comparison, design guidance, and compliance information.

Selection Guide

Choose the MAX301CSE+ when you need two independently controlled, normally-open SPST channels for precision signal gating in a 0C to +70C environment, and channel-to-channel matching matters - for example stereo audio routing, paired test-equipment paths, or data-acquisition isolation. If your equipment must operate below 0C, specify the MAX301ESE+, which is the same die and footprint with an extended temperature grade at no layout cost. If your circuit needs changeover (one input routed to either of two outputs), the SPDT MAX303CSE+ fits better; if you need two poles that switch together (for paired conductors or shielded-line gating), the DPST MAX305CSE+ is the right family member. The trade-off versus electromechanical relays is the 35-ohm series on-resistance and limited signal-range handling, so for power-level or very-high-voltage switching, use relays instead. All four family parts share the SOIC-16 footprint, easing future topology changes.

Comparison with Alternatives

Parameter This Product MAX301ESE+ MAX305CSE+ MAX303CSE+
Package SOIC-16 SOIC-16 - same SOIC-16 - same SOIC-16 - same
Brand Analog Devices (Maxim Integrated) Analog Devices (Maxim Integrated) Analog Devices (Maxim Integrated) Analog Devices (Maxim Integrated)
Switch Configuration 2 x SPST, normally open 2 x SPST, normally open DPST, normally open SPDT, two NO + two NC
On-Resistance (Max) 35 ohm 35 ohm 35 ohm 35 ohm
Channel Matching 2 ohm 2 ohm 2 ohm 2 ohm
Operating Temperature 0C to +70C -40C to +85C (extended) 0C to +70C 0C to +70C
Speed Class High-speed High-speed High-speed High-speed
RoHS / Lead-Free Compliant (+ suffix) Compliant (+ suffix) Compliant (+ suffix) Compliant (+ suffix)
Lifecycle Status Production Production Production Production

Key Differentiators

  • Guaranteed 2-ohm channel-to-channel matching (vs MAX303CSE+)
  • Normally-open default isolation (vs MAX305CSE+)
  • Extended-temperature drop-in upgrade path (vs MAX301ESE+)

Design Notes

Place the MAX301CSE+ close to the signals it gates and route analog signal traces short and direct, away from clocks and switching-regulator nets. Provide ceramic decoupling capacitors directly at the supply pins. Use the pin-configuration diagram in the Analog Devices MAX301 datasheet when assigning PCB tracks, and keep the control-logic traces separate from analog signal routing to avoid coupling control edges into gated signals.

The switch's up-to-35-ohm on-resistance sits in series with the signal path. For precision gain networks, choose switched resistances at least ten times higher than the on-resistance (3.5 kohm or greater for below-1% error), or calibrate the system to absorb the series resistance. The 2-ohm channel matching helps differential and stereo pairs, but low-impedance loads will still see measurable insertion loss - verify against the datasheet on-resistance-versus-signal-level curves.

The 'C' grade in MAX301CSE+ denotes a commercial 0C to +70C temperature range; using this variant in equipment that can see sub-zero temperatures risks out-of-spec operation. Select the pin-compatible MAX301ESE+ extended-grade variant for such environments - it lands on the identical SOIC-16 footprint with no layout change. Also note that MAX303 (SPDT) and MAX305 (DPST) family members are same-package but different-function parts; substituting them for the MAX301 requires circuit review, not just a BOM swap.

Verify the supply-voltage configuration for your application against the Analog Devices MAX301 datasheet before design freeze - the family supports dual-supply operation for bipolar signal handling, and exceeding the absolute maximum ratings on either supply or the analog signal pins will damage the device. Sequence supplies and keep signals within the supply rails at all times, including during startup, to avoid turning on the CMOS protection structures.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Yes
Halogen Free
Unknown
Conflict Minerals
Unknown

The '+' suffix denotes Analog Devices' enhanced (lead-free, RoHS-compliant) manufacturing flow per the manufacturer product page and distributor listings.

Data verified on: 2026-11-09 — data verified and curated by XAIPART's component engineering team

Related Searches

MAX301CSE+ datasheet MAX301CSE+ datasheet pdf MAX301CSE+ pinout MAX301CSE+ price MAX301CSE+ stock Analog Devices MAX301CSE+ MAX301CSE+ equivalent MAX301CSE+ vs MAX301ESE+ MAX301CSE+ replacement MAX301 dual SPST analog switch SOIC-16 MAX301 application circuit precision dual high-speed analog switch 35 ohm

Related Components & Terms

Analog Devices Maxim Integrated MAX301CSE+ MAX301ESE+ MAX303CSE+ MAX305CSE+ analog switch SPST switch normally-open switch analog multiplexer signal routing IC SOIC-16 SOP package family surface mount RoHS on-resistance channel matching high-speed switching data acquisition test and measurement
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details