MAX3243ECDBG4 - 500kbps RS-232 IC | Texas Instruments
MPN: MAX3243ECDBG4 ✓ ActiveMAX3243ECDBG4 Overview
An RS-232 line transceiver combines driver and receiver functions for connecting logic-level equipment to a serial port. The driver converts low-voltage logic signals into RS-232-compatible levels, while the receiver converts incoming differential or single-ended serial signals back into logic levels. This transceiver category belongs to the interface IC hierarchy: RS-232 transceiver → interface IC → semiconductor. It is useful when a system needs more than one serial channel, particularly in data acquisition, control, industrial communications, and legacy peripheral equipment.
Key features of the MAX3243ECDBG4 include a 3 V to 5.5 V supply range, multichannel RS-232 operation, data rates up to 500 kbps, and ±15 kV IEC ESD protection. The protection rating helps improve system resilience when the serial connector is exposed to electrostatic discharge, although board-level layout, grounding, and connector shielding remain important parts of an effective ESD strategy.
The MAX3243E family is designed for compatible with EIA-232 communication requirements and is suitable for systems that need multiple RS-232 drivers and receivers in one package. Its integrated multichannel arrangement reduces the number of separate transceiver packages required on a communications board while conserving board area and simplifying the connection of several serial ports.
Typical applications include industrial control systems, laboratory data loggers, POS terminals, embedded instrumentation, and host systems that connect to legacy RS-232 peripherals. The 500 kbps capability supports substantially faster serial links than a conventional low-speed RS-232 port, while the 3 V to 5.5 V supply range allows use with both 3.3 V and 5 V system rails.
Designers should follow the manufacturer datasheet for charge-pump capacitor selection, supply decoupling, driver and receiver pin assignments, and exposed-circuit details. Because the MAX3243ECDBG4 uses a narrow-body SSOP package, PCB layout should provide adequate copper and solder-joint area for reliable assembly.
This product page consolidates the device function, operating limits, protection rating, package information, sourcing path, and design considerations into one engineering reference. It also identifies genuinely relevant replacement questions and emphasizes direct-footprint verification instead of treating every RS-232 transceiver as a drop-in substitute.
Drop-in alternatives for MAX3243ECDBG4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MAX3243ECDBG4 (same form factor and footprint) — differing in Interface Standard, Maximum Data Rate, Package, Product Type.
MAX3243ECDB
✅ Drop-InContact for price
View Datasheet →MAX3243ECDBG4 Specifications
| Product Type | Multichannel RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps |
| ESD Protection | ±15 kV IEC ESD |
| Number of Terminals | 28 terminals |
| Package | 28-pin SSOP |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Operating Temperature Range | 0°C to 70°C |
| Temperature Grade | Commercial |
| Mounting Type | Surface mount |
| Interface Standard | RS-232 |
MAX3243ECDBG4 rectangular Pin Configuration Guide
Pin configuration for MAX3243ECDBG4 (rectangular package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for MAX3243ECDBG4.
Refer to the datasheet for full pin configuration.
Typical Applications
MAX3243ECDBG4 is suitable for 6 applications: Industrial Control Systems, Laboratory Data Loggers, Point-of-Sale Terminals, Embedded Service Equipment, Security and Access Systems, Communication Port Concentrators.
Industrial Control Systems
The MAX3243ECDBG4 fits compact industrial controllers that exchange RS-232 data with sensors, programmers, operator panels, and legacy plant equipment. Its 3 V to 5.5 V supply range supports 3.3 V and 5 V logic environments, while multichannel line-driver and receiver functions reduce the number of discrete interface packages required. Operation up to 500 kbps permits faster polling than low-speed RS-232 links. The ±15 kV IEC ESD rating adds protection for exposed equipment, although industrial installation practice still requires a protective enclosure, controlled grounding, and short or shielded cabling where appropriate.
Recommended
Laboratory Data Loggers
Laboratory instruments and data loggers often require several RS-232 ports for controlling sensors, loading programs, and transferring records. The MAX3243ECDBG4 consolidates multiple interface channels in one 28-pin SSOP, conserving PCB area in compact instruments. Its 500 kbps maximum data rate supports high-volume serial transfers, and the 3 V to 5.5 V operating range makes it adaptable to embedded acquisition systems. For bench equipment with user-accessible connectors, retain the specified ESD grounding and layout practices rather than treating the IC rating as the only protection layer.
Recommended
Point-of-Sale Terminals
Point-of-sale terminals may need an RS-232 connection to a printer, scanner, customer display, or magnetic-card peripheral while also serving a compact main board. The MAX3243ECDBG4 provides multichannel RS-232 driver and receiver functions in a single package, reducing component count and board area. Its 500 kbps capability supports routine transaction traffic and firmware data transfers. The 3 V to 5.5 V supply range suits both legacy 5 V accessories and modern 3.3 V embedded platforms. Production designs should include correct bypass capacitors, reliable connector grounding, and adequate copper around the SSOP leads.
Recommended
Embedded Service Equipment
Embedded service consoles, test heads, and maintenance controllers commonly communicate with legacy RS-232 peripherals while presenting a modern processor interface to the operator. The MAX3243ECDBG4 bridges that gap through integrated line-driver and receiver channels, and its 28-pin SSOP package keeps the footprint compact. The 500 kbps maximum rate is useful for configuration files and diagnostic logs, while the ±15 kV IEC ESD rating strengthens the connector interface. Deployment temperature remains 0°C to 70°C, so use an extended-temperature device or additional environmental controls where harsher conditions are expected.
Recommended
Security and Access Systems
Access-control readers, intercoms, and security panels can use the MAX3243ECDBG4 to manage multiple RS-232 peripherals such as card readers, displays, and alarm modules. The multichannel architecture reduces repeated transceiver circuitry and supports a compact controller PCB. A 500 kbps line rate allows responsive configuration and event-log transfers, and the 3 V to 5.5 V supply range aligns with common embedded security platforms. Because cable-connected readers may be exposed to user contact and electrostatic discharge, retain the manufacturer’s ESD layout guidance and consider adding external surge or signal-conditioning protection for long cables.
Recommended
Communication Port Concentrators
A serial port concentrator can use the MAX3243ECDBG4 to provide several RS-232 channels from one controller board. The device’s multichannel line-driver and receiver functions, combined with a maximum 500 kbps data rate, suit equipment that aggregates configuration links or status connections. Its narrow 28-pin SSOP package leaves more board area for processor, memory, and power circuitry than separate single-channel transceivers. The operating range of 0°C to 70°C and 3 V to 5.5 V supply support office and light-industrial environments. Power budgeting should include charge-pump behavior and the load presented by attached cables.
Recommended
Recommended Products Summary
Engineering reference data for MAX3243ECDBG4 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MAX3243ECDB |
|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP |
| Brand | Texas Instruments | Texas Instruments |
| Product Type | Multichannel RS-232 line driver and receiver | Multichannel RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps | 500 kbps |
| ESD Protection | ±15 kV IEC ESD | ±15 kV IEC ESD |
| Operating Temperature Range | 0°C to 70°C | 0°C to 70°C |
| Number of Terminals | 28 terminals | 28 terminals |
| Mounting Type | Surface mount | Surface mount |
| Interface Standard | RS-232 | RS-232 |
Key Differentiators
- Combines multiple RS-232 channels in one compact interface package (vs MAX3237CAI+T)
- Supports both 3.3 V and 5 V system rails (vs MAX3243EEUI+T)
- Provides connector-focused IEC ESD protection (vs MAX3243ECPWG4)
Design Notes
Follow the Texas Instruments MAX3243 datasheet layout for the charge-pump capacitors, supply bypass, driver outputs, and receiver inputs. Place the required capacitors adjacent to their designated pins and minimize loop area around them. Route the RS-232 driver and receiver nets away from clocks, switching inductors, and high-speed digital edges, because coupling into these nets can cause data errors despite the device’s ±15 kV IEC ESD protection.
Treat the cable-side RS-232 nets as potentially noisy and externally accessible. Connect each interface channel to its corresponding protection, filtering, or series-resistance network defined by the system reference design. Keep the ground-return path continuous from the transceiver ground to the connector shield or chassis reference. Avoid creating a long loop between signal and ground because that geometry can increase radiated emissions and susceptibility.
Do not assume that every MAX3243E ordering suffix is a footprint-compatible substitute. The MAX3243ECDBG4 uses a 28-pin SSOP package, while ordering codes with other package suffixes can require different PCB land patterns. Before replacing the device, verify pin numbers, exposed or connected terminals, charge-pump capacitor values, temperature grade, and the exact ESD test rating against the manufacturer datasheet.
Estimate the transceiver’s supply demand from the datasheet operating-current limits and the attached-channel configuration rather than using only the idle current. The RS-232 drivers can draw additional current as data patterns change, and external cables add load through the receiver network. Confirm that the 3 V to 5.5 V source has adequate margin and that bypass capacitance remains close to the device.
The commercial ordering option supports a 0°C to 70°C ambient range. Place the 28-pin SSOP where natural airflow is available and avoid locating it beside a heat source that prevents the package from reaching the intended ambient temperature. SSOP leads have limited solder-joint area, so use an assembly process that produces reliable fillets and inspect completed joints for bridging across the closely spaced leads.
Compliance Information
The MAX3243 datasheet identifies ±15 kV IEC ESD protection, but a distinct IEC document number is not stated in the product information. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established and remain unknown.