Texas Instruments

MAX3243ECPWG4 - 3/5 RS-232 Transceiver 28-TSSOP | Texas Instruments

MPN: MAX3243ECPWG4 ✗ End of Life
3 V to 5.5 V Vdss 28-TSSOP Package
MOQ: 1 |

MAX3243ECPWG4 Overview

Texas Instruments MAX3243ECPWG4 is a 3-to-5.5-V multichannel RS-232 line driver/receiver with 3 drivers, 5 receivers, and ±15-kV IEC ESD protection in a 28-pin TSSOP package. The device is designed for equipment that needs multiple RS-232 ports while operating from a single 3-V or 5-V supply. Its listed data rate is 500 kbps, and the operating temperature grade is commercial, 0°C to 70°C.

An RS-232 transceiver combines the electrical interface functions required by a serial communications port. The driver section translates digital logic levels into RS-232 line signals, while the receiver section converts incoming line signals into logic-compatible outputs. A multichannel device such as the MAX3243ECPWG4 supports three driver channels and five receiver channels, allowing a system to implement several serial links without using separate single-channel transceivers. The family is commonly positioned for point-to-point RS-232 equipment, industrial control interfaces, and legacy peripheral connections.

The MAX3243E family supports supply voltages from 3 V to 5.5 V, making it suitable for systems with 3.3-V or 5-V digital rails. The device includes ±15-kV IEC ESD protection on its external RS-232 connections, helping protect interface circuitry when cables are connected to user-accessible equipment. The MAX3243ECPWG4 is specified in a 28-TSSOP package with a 4.40-mm body width, and the commercial temperature range covers 0°C to 70°C.

Use the manufacturer datasheet and package drawing to confirm the exact pin functions, exposed-pad arrangement, decoupling requirements, and recommended external charge-pump capacitors. The MAX3243E family operates as a multichannel RS-232 interface rather than as a voltage regulator or logic IC, so its power, ground, and signal connections should follow the device-specific application circuit. Request a quote through the XAIPART Request a Quote form for current commercial sourcing information.

This page summarizes the device's RS-232 interface role, key electrical ratings, package information, and practical design considerations. It also distinguishes the obsolete MAX3243ECPWG4 ordering code from available family members and drop-in candidates, helping engineers make a controlled replacement decision rather than relying on package similarity alone.

Drop-in alternatives for MAX3243ECPWG4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MAX3243ECPWG4 (same form factor and footprint) — differing in Maximum Data Rate, ESD Protection, Interface Standard, Package.

Texas Instruments
Maximum Data Rate: 250 kbps
ESD Protection: ±15 kV HBM
Interface Standard: RS-232
Compare with MAX3243ECPWG4 →
Texas Instruments
Interface Standard: TIA/EIA-232-F
Package: 28-pin TSSOP
Compare with MAX3243ECPWG4 →

MAX3243ECPW

✅ Drop-In
Texas Instruments
📦 28-TSSOP
3 V to 5.5 V · 500 kbps · 3 · 5 · TIA/EIA-232-F · ±15 kV · ±15 kV · ±8 kV

Contact for price

View Datasheet →

SP3243EBCY-L

✅ Drop-In
📦 28-TSSOP
Same 28-TSSOP footprint and direct-replacement listing; the retrieved comparison describes consistent main performance characteristics, while channel, ESD, temperature, and capacitor details require final datasheet verification.

📋 Reference alternative (not in catalog)

MAX3243ECPWG4 Specifications

Product Type Multichannel RS-232 line driver/receiver
Number of Drivers 3
Number of Receivers 5
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 500 kbps
ESD Protection ±15 kV IEC ESD protection
Duplex Full duplex
Receiver Hysteresis 500 mV
Operating Temperature Range 0°C to 70°C
Temperature Grade Commercial
Package 28-TSSOP
Package Body Width 4.40 mm
Mounting Type Surface mount
Number of Terminals 28
Terminal Form Gull wing
Package Shape Rectangular
Peak Reflow Temperature 260°C

MAX3243ECPWG4 rectangular Pin Configuration Guide

Pin configuration for MAX3243ECPWG4 (rectangular package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

rectangular package pinout diagram for MAX3243ECPWG4

No detailed pinout data available for MAX3243ECPWG4.

Refer to the datasheet for full pin configuration.

Typical Applications

MAX3243ECPWG4 is suitable for 6 applications: Industrial RS-232 Control Interfaces, Point-to-Point Serial Links, Instrumentation and Test Equipment, Legacy Peripheral Connectivity, Multiport Data Acquisition, Commercial Communication Equipment.

🏭

Industrial RS-232 Control Interfaces

The MAX3243ECPWG4 is suitable for legacy industrial controllers that expose multiple RS-232 ports to instruments, service equipment, or configuration tools. Its 3-to-5.5-V supply range allows operation beside 3.3-V or 5-V digital logic, while 3 drivers and 5 receivers provide asymmetric channel support for monitoring and control. The ±15-kV IEC ESD protection strengthens the cable-facing interface, but it does not eliminate the need for chassis grounding or connector-level protection.

🌐

Point-to-Point Serial Links

Use the MAX3243ECPWG4 when a system must support several point-to-point RS-232 links without allocating one transceiver package per direction. The three drivers support three outbound channels, while five receivers can monitor five inbound signals, allowing asymmetrical equipment arrangements. Its commercial 0°C-to-70°C temperature grade and 3-V-to-5.5-V supply range are suitable for indoor commercial equipment, with system designers still responsible for cable length, signal integrity, and grounding.

🖥️

Instrumentation and Test Equipment

The MAX3243ECPWG4 can serve older test and measurement equipment that must communicate with host computers or service interfaces through RS-232. The multichannel arrangement is useful for receiving commands or status from several peripherals while driving selected devices. Because the MAX3243ECPWG4 is obsolete, new instrument designs should verify current family alternatives, confirm the 500-kbps manufacturer product-page rating, and reproduce the recommended charge-pump and bypass-capacitor layout.

💊

Legacy Peripheral Connectivity

The MAX3243ECPWG4 is appropriate for maintaining compatibility with legacy RS-232 peripherals in industrial, medical-equipment, and laboratory systems. Its 5 receivers allow multiple peripheral status lines to be monitored, while 3 drivers handle command or control outputs. The integrated IEC ESD protection is especially relevant where the interface connects to external cables, although medical and laboratory installations still need appropriate isolation, grounding, and safety validation outside the IC itself.

📡

Multiport Data Acquisition

A multiport acquisition system can use the MAX3243ECPWG4 to consolidate several RS-232 links into one host interface. Five receiver channels help collect equipment status or asynchronous reports, while three driver channels support configuration commands to selected instruments. The 3-V-to-5.5-V operating range supports mixed-voltage system architectures, and the 28-TSSOP package keeps the interface compact. Design the external network and protection scheme so that ground potential differences do not create interface stress.

🔧

Commercial Communication Equipment

The MAX3243ECPWG4 fits commercial equipment that retains RS-232 for configuration, diagnostics, or service access while other interfaces handle modern data exchange. Three transmit channels and five receive channels offer practical flexibility for asymmetric command and status traffic. Its 0°C-to-70°C commercial range and 3-V-to-5.5-V supply operation suit indoor products. For new production, compare current same-family and cross-brand 28-TSSOP candidates and verify connector-level ESD and surge protection independently.

Recommended Products Summary

MAX3243ECPW Texas Instruments Used in: Industrial RS-232 Control Interfaces, Point-to-Point Serial Links, Instrumentation and Test Equipment, Legacy Peripheral Connectivity, Multiport Data Acquisition, Commercial Communication Equipment SP3243EBCY-L 28-TSSOP RS-232 replacement candidate Used in: Industrial RS-232 Control Interfaces, Point-to-Point Serial Links, Legacy Peripheral Connectivity, Commercial Communication Equipment
What is the MAX3243ECPWG4?
The MAX3243ECPWG4 is a Texas Instruments 3-to-5.5-V multichannel RS-232 transceiver with 3 drivers, 5 receivers, and ±15-kV IEC ESD protection. According to the manufacturer product page, the MAX3243E family supports data rates up to 500 kbps. The MAX3243ECPWG4 ordering code is specified in a 28-TSSOP package and is listed as obsolete, so it should be treated as an end-of-life design consideration.
What is the operating voltage of MAX3243ECPWG4?
The MAX3243ECPWG4 operates from 3 V to 5.5 V, allowing use with both 3.3-V and 5-V systems. The manufacturer product page identifies the MAX3243E family as a 3- to 5.5-V multichannel RS-232 line driver/receiver. The exact minimum and maximum supply limits should be confirmed against the manufacturer datasheet for the specific revision and operating conditions.
How many RS-232 drivers and receivers does MAX3243ECPWG4 have?
The MAX3243ECPWG4 contains 3 RS-232 drivers and 5 RS-232 receivers, as shown in the distributor and manufacturer product descriptions. This asymmetric channel arrangement is useful when a system needs more receive paths than transmit paths, such as monitoring equipment or multiport serial interfaces. The MAX3243E family is a full-duplex interface solution.
What is the maximum data rate of MAX3243ECPWG4?
The MAX3243ECPWG4 supports a maximum data rate of 500 kbps according to the Texas Instruments MAX3243E product page. One distributor description also identifies the family as a 250-kbps-rated interface, so the final design decision should follow the specific manufacturer datasheet and application conditions rather than mixing ratings from different listings. The 500-kbps figure is the manufacturer product-page value.
Does MAX3243ECPWG4 include ESD protection?
Yes. The MAX3243ECPWG4 provides ±15-kV IEC ESD protection on the RS-232 interface, according to the manufacturer product page and the retrieved MAX3243E descriptions. The protection is intended for the external cable-facing interface and helps improve system robustness during electrostatic discharge events. Proper grounding, cable routing, and connector selection remain necessary.
Is MAX3243ECPWG4 still active?
The MAX3243ECPWG4 is obsolete according to the retrieved DigiKey product listing, while the manufacturer continues to describe the MAX3243E family. For new production, evaluate current MAX3243E ordering codes or a qualified equivalent rather than assuming the original MAX3243ECPWG4 code remains orderable. Use the XAIPART Request a Quote form when you need current sourcing confirmation.
Where can I download the MAX3243ECPWG4 datasheet?
The MAX3243E datasheet and product information are available from Texas Instruments through the official MAX3243E product page. The retrieved search results also identify a MAX3243ECPWG4 datasheet PDF hosted by AllDatasheet and a product listing hosted by FindIC. Use the Texas Instruments page as the primary source for revision, package drawings, pin functions, and electrical characteristics.
Where can I find the MAX3243ECPWG4 pinout?
The MAX3243ECPWG4 pinout should be taken from the Texas Instruments MAX3243E datasheet and its 28-TSSOP package drawing. The retrieved data confirms a 28-terminal TSSOP package but does not provide the complete numbered pin description, so the complete pin assignments are not reproduced on this page. Do not assign PCB connections from a generic 28-pin drawing; verify every driver, receiver, supply, ground, and charge-pump connection against the manufacturer document.
What is the best drop-in replacement for MAX3243ECPWG4?
The MAX3243ECPW is the closest same-manufacturer drop-in candidate identified in the cross-reference results because it uses the same 28-TSSOP package and is described as having consistent terminals and package characteristics. The SP3243EBCY-L is another 28-pin TSSOP candidate identified as a direct replacement. Final substitution still requires checking pin functions, supply limits, charge-pump capacitors, ESD ratings, and lifecycle status.
Can SP3243EBCY-L replace MAX3243ECPWG4?
SP3243EBCY-L is identified in the retrieved comparison results as a TSSOP-28 alternative whose terminals and package are consistent with MAX3243ECPWG4 and whose main performance characteristics are compatible. It can therefore be considered a candidate drop-in replacement, but the exact pin mapping and external capacitor requirements must be checked before production use. This page treats it as a cross-brand candidate, not as an unconditional substitution.
What is the difference between MAX3243ECPWG4 and MAX3243ECPW?
The retrieved cross-reference results describe MAX3243ECPWG4 and MAX3243ECPW as having consistent terminals and package characteristics, with replacement that does not require modification of the existing circuit. Both are identified as 28-TSSOP RS-232 transceivers in the family context. The ordering-code difference should still be checked against the manufacturer ordering information for temperature grade, packaging, and lifecycle status.
Is MAX3243ECPWG4 suitable for 3.3-V industrial equipment?
The MAX3243ECPWG4 is electrically compatible with 3.3-V operation because its specified supply range is 3 V to 5.5 V. For industrial equipment, also check the commercial 0°C to 70°C temperature grade and the external interface requirements. If the enclosure is exposed to temperatures outside that range, select an appropriately qualified part rather than relying only on the supply-voltage compatibility.
How should RS-232 ESD protection be designed around MAX3243ECPWG4?
Place the MAX3243ECPWG4 close to the external connector and route each RS-232 signal through the intended protection network, while keeping sensitive logic traces away from cable-facing conductors. The integrated ±15-kV IEC ESD protection is valuable but does not replace a correctly engineered return path, chassis grounding, or connector selection. Follow the manufacturer application circuit for bypass capacitors and interface protection.
Where can I buy MAX3243ECPWG4 online?
The MAX3243ECPWG4 is an obsolete Texas Instruments ordering code, so current availability should be confirmed through the XAIPART Request a Quote form on this page. The page also links to manufacturer, distributor, and cross-reference information for technical validation. Because the original code is marked obsolete, engineers should compare any offered stock against the exact suffix, package, temperature grade, and documented lifecycle condition.
What is the price of MAX3243ECPWG4?
The current commercial price for MAX3243ECPWG4 should be requested through the XAIPART Request a Quote form on this page. No price is displayed because the part is listed as obsolete and the available market may involve limited or irregular inventory. The technical data, package, channel count, lifecycle status, and replacement options remain the primary selection criteria for this legacy interface device.
What is the lead time for MAX3243ECPWG4?
Lead time for the obsolete MAX3243ECPWG4 should be confirmed through the XAIPART Request a Quote form. The manufacturer product page describes the MAX3243E family, while the retrieved distributor result marks the specific MAX3243ECPWG4 ordering code as obsolete. Because legacy inventory can be limited or unavailable, request the current quantity, condition, sourcing date, and traceability requirements before committing to a build schedule.

Engineering reference data for MAX3243ECPWG4 — comparison, design guidance, and compliance information.

Selection Guide

Choose MAX3243ECPWG4 only when an existing design specifically requires the obsolete Texas Instruments ordering code and its documented 3-driver, 5-receiver RS-232 arrangement. For maintenance, first evaluate MAX3243ECPW because the retrieved comparison describes consistent terminals and package characteristics within the same manufacturer family. Consider SP3243EBCY-L when a cross-brand 28-TSSOP sourcing path is needed, but verify the complete pin map, supply range, data rate, ESD rating, temperature grade, and charge-pump capacitor requirements before releasing it to production. Neither alternative should be approved solely from package matching: the interface function, external circuit, lifecycle expectations, and regulatory requirements must also align. For new multiport designs, compare the current MAX3243E family ordering options and the selected cross-brand device using the manufacturer application circuits.

Comparison with Alternatives

Parameter This Product MAX3243ECPW SP3243EBCY-L
Package 28-TSSOP 28-TSSOP 28-TSSOP
Brand Texas Instruments Texas Instruments Exar

Key Differentiators

  • Asymmetric multichannel RS-232 interface (vs SP3243EBCY-L)
  • Manufacturer-identified ESD protection (vs SP3243EBCY-L)
  • Documented package-compatible same-family path (vs MAX3243ECPW)

Design Notes

Do not treat a 28-TSSOP footprint as sufficient proof of replacement compatibility. Confirm the complete numbered pin map, charge-pump capacitor connections, supply decoupling pins, receiver enable or shutdown functions, and the location of every RS-232 line. The MAX3243ECPWG4 and its candidate replacements use the same package outline, but the manufacturer datasheet must still be checked before a PCB or BOM change is released.

Place the IC close to the RS-232 connector and keep the cable-facing traces short. Follow the manufacturer application circuit for the external charge-pump capacitors and place input and output bypass capacitors close to their designated pins. Keep long logic and return paths away from RS-232 conductors where practical, and provide a continuous chassis or signal-ground strategy at the connector.

RS-232 receivers can respond to ground-potential differences and cable-borne transients even when the IC includes ±15-kV IEC ESD protection. Use the shortest practical cable routing, maintain a defined ground reference, and consider external protection or isolation when long cables connect equipment at different ground potentials. Validate EMC and ESD performance at the complete product level rather than relying on the IC rating alone.

Operate the device only within the specified 3-V-to-5.5-V supply range. Decouple the supply rails according to the manufacturer application circuit and verify startup, shutdown, and power-sequencing behavior in the complete system. Because this is an RS-232 transceiver with internal charge-pump circuitry, do not substitute generic bypass values without checking the specific MAX3243E datasheet and the selected alternative's requirements.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The retrieved product information identifies a commercial-temperature RS-232 interface IC and ±15-kV IEC ESD protection, but it does not provide a complete RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration for this exact ordering code.

Data verified on: 2026-11-09 — data verified and curated by XAIPART's component engineering team

Related Searches

MAX3243ECPWG4 datasheet MAX3243ECPWG4 datasheet pdf MAX3243ECPWG4 pinout MAX3243ECPWG4 equivalent MAX3243ECPWG4 replacement MAX3243ECPWG4 drop-in replacement MAX3243ECPWG4 vs MAX3243ECPW MAX3243ECPWG4 vs SP3243EBCY-L Texas Instruments MAX3243ECPWG4 MAX3243ECPWG4 3V 5.5V MAX3243ECPWG4 500kbps MAX3243ECPWG4 28-TSSOP MAX3243ECPWG4 price MAX3243ECPWG4 stock

Related Components & Terms

Texas Instruments MAX3243ECPWG4 MAX3243ECPW SP3243EBCY-L MAX3243E RS-232 transceiver multichannel line driver/receiver interface IC semiconductor RS-232 ESD protection IEC ESD TSSOP-28 surface mount SMD 3.3 V logic 5 V logic 500 kbps industrial control test and measurement instrumentation legacy peripheral charge-pump capacitor full duplex commercial temperature grade
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details