Texas Instruments

MC3486NE4 - Quad Differential Line Receiver | Texas Instruments

MPN: MC3486NE4 ✓ Active
16-pin DIP Package
MOQ: 1 |

MC3486NE4 Overview

Texas Instruments MC3486NE4 is a monolithic quadruple differential line receiver with four independent differential inputs, TTL-compatible outputs, and 3-state output capability in a 16-pin through-hole DIP package. Designed for balanced digital-interface systems, it supports ANSI TIA/EIA-422-B and TIA/EIA-423-B environments as well as ITU V.10 and V.11 recommendations. The four receiver channels provide a practical way to recover logic-level signals from differential data lines while supporting connection to shared buses through high-impedance output states.

A differential line receiver converts the voltage difference between two conductors into a conventional logic-level output. This receiver belongs to the line-driver and line-receiver hierarchy, within interface ICs and data-communication ICs. Differential signaling improves common-mode-noise rejection and allows data to be transmitted reliably over longer cable runs than a single-ended interface. The MC3486NE4 implements four such channels in one package, reducing component count in multi-channel industrial, communications, and data-processing equipment.

The principal features include four independent differential receivers, TTL-compatible outputs, 3-state operation for bus-oriented connection, and compatibility with ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, ITU V.10, and ITU V.11 interface standards. Its through-hole 16-pin DIP construction supports conventional PCB assembly and repair. The MC3486NE4 suffix identifies the commercial-temperature, plastic-DIP ordering configuration, although individual electrical limits should be confirmed against the manufacturer datasheet for the operating conditions of the finished design.

In a typical interface, a remote transmitter sends balanced data into a twisted pair, and the MC3486NE4 detects the differential voltage to produce a logic output for a UART, microprocessor, programmable logic, or other digital controller. Because each receiver is independent, four unrelated channels can be decoded in parallel. The 3-state output feature also permits a receiver output to be disconnected when multiple devices share a bus, provided the control and pull-up arrangements follow the system design requirements.

Typical applications include industrial control links, instrumentation interfaces, peripheral data links, telecommunications equipment, and legacy computer peripherals. The device is especially relevant where a modern controller must connect to an RS-422 or RS-423 interface while minimizing the number of receiver packages. Its four-channel architecture can also simplify multi-axis positioning, test systems, and distributed control networks that carry several low-speed differential signals.

Designers should verify input voltage limits, common-mode range, propagation delay, enable timing, output drive capability, and temperature limits against the manufacturer datasheet before finalizing the interface. Decoupling and signal-return paths should be arranged to prevent fast digital edges and cable transients from coupling into adjacent channels. Through-hole construction provides mechanical robustness, but the PCB must preserve the exact pin orientation and provide adequate clearance for the receiver's through-hole leads.

This page organizes the manufacturer interface standards, package information, sourcing details, candidate replacements, and practical selection guidance for engineers evaluating the MC3486NE4. Cross-references are presented as design aids and should be checked against the complete pinout, timing characteristics, logic states, and environmental limits before a substitution is approved.

Drop-in alternatives for MC3486NE4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MC3486NE4 (same form factor and footprint) — differing in Package, Output State, Supported Standards.

Texas Instruments
Package: 16-pin PDIP
Output State: 3-state with high-impedance state
Supported Standards: ANSI TIA/EIA-422-B, TIA/EIA-423-B, ITU V.10 and V.11
Compare with MC3486NE4 →
Texas Instruments
Package: 16-DIP (0.300 in, 7.62 mm)
Output State: 3-state, including high-impedance state
Supported Standards: ANSI TIA/EIA-422-B and ANSI TIA/EIA-423-B
Compare with MC3486NE4 →

MC3486N

✅ Drop-In
Texas Instruments
📦 16-pin DIP
Quadruple differential line receiver · 4 independent channels · ANSI TIA/EIA-422-B, TIA/EIA-423-B, ITU V.10 and V.11 · 5 V · TTL-compatible · 3-state with high-impedance state · Differential · 0°C to 70°C

Contact for price

View Datasheet →

MC3486NG4

✅ Drop-In
Texas Instruments
📦 16-pin DIP
Quadruple differential line receiver · 4 channels · 5 V · TTL-compatible · 3-state, including high-impedance state · ANSI TIA/EIA-422-B and ANSI TIA/EIA-423-B · ITU V.10 and ITU V.11 · 16-DIP (0.300 in, 7.62 mm)

Contact for price

View Datasheet →

DS3486N

✅ Drop-In
📦 16-pin DIP
Compared MC3486 family provides four differential receivers; channel count differs by 0, while exact thresholds, timing, and enable behavior require cross-checking.

📋 Reference alternative (not in catalog)

HD75173P

✅ Drop-In
📦 16-pin DIP
Compared receiver family uses four differential channels; channel count differs by 0, while supply voltage, timing, and logic-control differences require verification.

📋 Reference alternative (not in catalog)

MC3486NE4 Specifications

Receiver Configuration 4 independent differential line receivers
Number of Differential Input Pairs 4 pairs
Output Logic Compatibility TTL-compatible
Output States 3-state including high-impedance
Input Interface Differential
RS-422 Compatibility ANSI TIA/EIA-422-B
RS-423 Compatibility ANSI TIA/EIA-423-B
ITU Compatibility V.10 and V.11
Package 16-pin DIP
Terminal Count 16 terminals
Mounting Type Through-hole
Package Shape Rectangular
Temperature Grade Commercial

MC3486NE4 rectangular Pin Configuration Guide

Pin configuration for MC3486NE4 (rectangular package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

rectangular package pinout diagram for MC3486NE4

No detailed pinout data available for MC3486NE4.

Refer to the datasheet for full pin configuration.

Typical Applications

MC3486NE4 is suitable for 6 applications: Industrial Control Data Links, Instrumentation and Test Systems, Telecommunications Equipment Interfaces, Computer Peripherals and Legacy Data Links, Multi-Axis Positioning Interfaces, Distributed Control Networks.

🏭

Industrial Control Data Links

The MC3486NE4 is suitable for industrial control equipment that receives several low-speed differential data signals from field equipment or a remote controller. Its four independent differential receivers can recover TTL-compatible logic levels in a single 16-pin DIP package, while the manufacturer datasheet identifies ANSI TIA/EIA-422-B and TIA/EIA-423-B compatibility. The 3-state outputs can support bus-oriented arrangements when the system provides the required biasing and a verified control sequence. Keep each differential pair routed as a controlled impedance path, maintain a continuous return route, and confirm common-mode range, propagation delay, and enable timing in the electrical tables.

🔧

Instrumentation and Test Systems

The MC3486NE4 can receive four differential command or status channels in instrumentation, test, and measurement systems where a controller must communicate over balanced wiring. The four-channel arrangement reduces the number of receiver packages compared with discrete single-channel solutions, while TTL-compatible outputs connect naturally to digital control logic. The 16-pin through-hole package also suits legacy or serviceable test hardware. When applying the receiver, verify the permitted common-mode range at the longest cable length, place input protection away from the IC pins when needed, and use the manufacturer timing limits to establish sampling margins around incoming data edges.

🌐

Telecommunications Equipment Interfaces

The MC3486NE4 is appropriate for telecommunications or data-communication equipment that needs multiple balanced receive channels. According to the manufacturer datasheet, the receiver supports ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, and ITU V.10 and V.11 interfaces, making it suitable for established differential-interface designs. The four independent channels can handle separate control, status, or data signals, and the 3-state outputs permit bus participation when the system architecture requires it. Check propagation delay against the target bit rate, preserve pair symmetry through connector and cable transitions, and confirm supply and temperature limits from the device specification.

🖥️

Computer Peripherals and Legacy Data Links

The MC3486NE4 can be used in computer peripherals and legacy data-link equipment that still relies on balanced differential signaling. Its TTL-compatible outputs provide a straightforward interface between the recovered logic signals and a microprocessor, UART, or other controller, while the four receivers support parallel control functions in one package. The through-hole DIP construction is useful for repairable boards and industrial equipment with long service lives. Confirm that the legacy interface uses a voltage arrangement covered by the receiver's input limits, and account for the MC3486 enable and output timing before connecting a channel to a shared bus.

🤖

Multi-Axis Positioning Interfaces

The MC3486NE4 can support multi-axis positioning equipment by receiving differential position, limit, or drive-status signals through four independent channels. Consolidating these signals into one receiver package simplifies the interface between a motion controller and external axis electronics. The 3-state outputs may also assist bus-oriented control schemes, provided pull-up or pull-down components and enable sequencing are designed correctly. The receiver's TTL-compatible output can connect to a digital controller after the differential signal has been recovered. Use the manufacturer propagation-delay and enable-timing limits to set control timing, and validate common-mode margin at each axis cable length.

🧩

Distributed Control Networks

The MC3486NE4 is useful in distributed control systems where remote nodes send multiple differential signals back to a central controller. Its four independent receivers combine several data or acknowledgment channels without requiring four separate IC packages, and the documented TIA/EIA-422-B, TIA/EIA-423-B, ITU V.10, and ITU V.11 support covers several established interface conventions. Use matched routing for each differential pair, provide a suitable ground or return strategy as required by the installation, and isolate the receiver from cable transients when the installation environment introduces surge exposure. Validate all signal thresholds and timing at the intended temperature and supply voltage.

What is the MC3486NE4?
The MC3486NE4 is a Texas Instruments monolithic quadruple differential line receiver with four independent receivers, TTL-compatible outputs, and 3-state output capability. According to the manufacturer datasheet, the device is intended to meet ANSI TIA/EIA-422-B and TIA/EIA-423-B specifications and ITU V.10 and V.11 recommendations. It is packaged in a 16-pin through-hole DIP.
What are the key specifications of MC3486NE4 that engineers should know?
The MC3486NE4 provides four independent differential receiver channels, TTL-compatible outputs, and a 3-state output option in a 16-pin DIP package. The manufacturer datasheet identifies support for ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, ITU V.10, and ITU V.11 interfaces. Supply voltage, common-mode range, propagation delay, and exact enable timing must be taken from the device's electrical-characteristics table.
Where can I download the MC3486NE4 datasheet PDF?
The official MC3486NE4 datasheet PDF is available from the Texas Instruments product page and the manufacturer's direct literature link. The document identifies the IC as a quadruple differential line receiver with 3-state outputs and provides the authoritative pin descriptions, electrical limits, timing characteristics, and standard-compliance information. Use the TI-hosted copy for design review and procurement traceability.
Where can I find the MC3486NE4 pinout?
The MC3486NE4 pinout is defined in the pin-configuration section of the Texas Instruments MC3486 datasheet. The device uses a 16-pin DIP package with through-hole terminals. Assign every signal and supply connection from the manufacturer's pin table rather than inferring positions from another receiver, and confirm the physical pin-1 orientation against the PCB footprint before assembly.
Is the MC3486NE4 suitable for RS-422 interfaces?
Yes, the MC3486NE4 is suitable for RS-422 interface designs because the manufacturer datasheet states that the device meets the requirements of ANSI TIA/EIA-422-B. It also supports ANSI TIA/EIA-423-B and ITU V.10 and V.11. The standard indicates interface compatibility, while the electrical-characteristics table must still be checked for the particular cable length, data rate, noise environment, and supply conditions.
What is the difference between differential input and single-ended input?
A differential receiver responds to the voltage difference between two input conductors, while a single-ended receiver measures a voltage relative to ground. The MC3486NE4 contains four differential receivers, allowing it to recover logic states from balanced interconnects. According to the manufacturer datasheet, its interface targets include TIA/EIA-422-B, TIA/EIA-423-B, ITU V.10, and ITU V.11.
What can the 3-state outputs on the MC3486NE4 do?
The 3-state outputs on the MC3486NE4 can provide a high-impedance state in addition to active logic levels. This allows a receiver channel to be electrically disconnected when devices share a bus, assuming the system uses suitable pull-up or pull-down arrangements. The manufacturer datasheet confirms the three-state feature; enable polarity and timing should be verified from the specific pin and timing tables.
Can MC3486NE4 be used in industrial communication equipment?
The MC3486NE4 can be used in industrial communication equipment that uses compatible differential data interfaces. Its four independent channels and TTL-compatible outputs suit multi-signal equipment links, while the 3-state capability supports bus-oriented arrangements. According to the manufacturer datasheet, the device supports ANSI TIA/EIA-422-B and TIA/EIA-423-B plus ITU V.10 and V.11.
Where can I buy MC3486NE4 online?
MC3486NE4 can be requested through the Request a Quote form on this XAIPART page. The form should be used to confirm current price, stock status, minimum order quantity, and lead time for the exact 16-pin DIP ordering configuration. Avoid approving a quote that substitutes a different package, temperature grade, or MC3486 suffix without reviewing the ordering information.
What is the price of MC3486NE4?
Use the Request a Quote form on this XAIPART page to request the current MC3486NE4 price and quantity availability. The form is the appropriate channel for a firm quotation because market pricing and stock can change. Confirm that the quotation identifies MC3486NE4 specifically, including its commercial-temperature, 16-pin through-hole DIP configuration.
What is the lead time for MC3486NE4?
Request the current MC3486NE4 lead time through the Request a Quote form on this page. The response should confirm the exact ordering code, package, temperature grade, order quantity, and expected dispatch timing. For production planning, also ask the supplier to identify any lifecycle or allocation status affecting future orders.
Is MC3486NE4 in stock?
Current MC3486NE4 stock status should be confirmed through the Request a Quote form on this XAIPART page. Include your required quantity, approved manufacturer list status, and target delivery date in the request. A confirmed quantity allocation is more useful than a general listing indication when the part is intended for production use.
What is the best drop-in replacement for MC3486NE4?
The closest documented candidates are MC3486N and MC3486NG4, plus the compared DS3486N and HD75173P families, but no alternative should be approved solely from a comparison result. A true drop-in replacement must match the 16-pin DIP pinout, three-state logic, supply requirements, input thresholds, output timing, and temperature limits. Verify every condition against the manufacturer datasheets before substitution.
Can HD75173P replace MC3486NE4?
HD75173P is a candidate to evaluate against the MC3486NE4 because the cross-reference data explicitly compares the two differential receiver families. It should not be treated as an unconditional drop-in replacement. According to the MC3486 manufacturer datasheet, the target has four differential receivers, TTL-compatible 3-state outputs, and a 16-pin DIP package; confirm that the replacement matches all of these details.
When should I choose MC3486NE4 over another quad line receiver?
Choose the MC3486NE4 when the design requires a four-channel differential receiver in a 16-pin through-hole DIP with TTL-compatible 3-state outputs. The manufacturer datasheet identifies support for ANSI TIA/EIA-422-B and TIA/EIA-423-B along with ITU V.10 and V.11. Select another candidate when it offers a verified advantage such as a different package, supply range, speed, temperature grade, or automotive qualification.
Is MC3486NE4 the same as MC3486N or MC3486NG4?
MC3486NE4, MC3486N, and MC3486NG4 belong to the same MC3486 quadruple differential receiver family, but ordering suffixes can identify different package, temperature, or qualification conditions. The manufacturer product page describes the common MC3486 function. Verify each complete ordering code and pinout in the datasheet before treating one as a direct substitute for the commercial-grade MC3486NE4.

Engineering reference data for MC3486NE4 — comparison, design guidance, and compliance information.

Selection Guide

Choose the MC3486NE4 when a legacy or industrial design requires four differential receiver channels, TTL-compatible 3-state outputs, and a 16-pin through-hole DIP footprint. Its manufacturer-documented support for ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, ITU V.10, and ITU V.11 makes it a sensible default for established balanced-interface equipment. MC3486N or MC3486NG4 may be preferable when their ordering codes offer a more suitable temperature grade or procurement condition, but the suffix-specific ordering table must be checked. Consider DS3486N or HD75173P only after their pinouts, thresholds, timing, supply range, and enable logic have been compared line by line. A candidate is not a drop-in choice merely because it is also a quad line receiver. For new compact designs, an alternative package may simplify assembly, while for service and legacy repair the MC3486NE4's through-hole construction can reduce mechanical rework.

Comparison with Alternatives

Parameter This Product MC3486N MC3486NG4 DS3486N HD75173P
Brand Texas Instruments Texas Instruments Texas Instruments National Semiconductor Renesas Electronics
Package 16-pin DIP 16-pin DIP 16-pin DIP 16-pin DIP 16-pin DIP
Receiver Channels 4 differential receivers 4 differential receivers 4 differential receivers 4 differential receivers 4 differential receivers

Key Differentiators

  • Four differential channels in one receiver package (vs HD75173P)
  • Documented support for four interface conventions (vs DS3486N)
  • Three-state TTL-compatible outputs (vs MC3486N)

Design Notes

Route each differential input as a controlled pair with consistent spacing and impedance. Avoid sharing a return-current path with noisy switching nodes, and minimize stub branches between the connector, protection components, and MC3486NE4 inputs. Confirm the receiver's common-mode range and differential thresholds against the worst-case cable voltage, ground offset, noise, and surge conditions before treating the interface as compliant.

Do not infer enable polarity, input limits, or bus timing from the term 3-state alone. Use the MC3486 manufacturer datasheet to identify the active logic level, disable time, output leakage, and input thresholds. A high-impedance output does not remove the need for suitable bias resistors, and it must not be used to hold a wired-OR bus at a valid logic level without a deliberate pull-up or pull-down arrangement.

Use a 16-pin through-hole DIP footprint with the physical pin-1 orientation verified against the package drawing. Maintain adequate clearance between adjacent input pairs and keep sensitive receive traces away from transformer windings, relay contacts, clock lines, and high-current switching paths. If the board is wave-soldered, inspect the underside for solder bridges and confirm that no receiver output is driven by two external devices at the same time.

The MC3486NE4, MC3486N, and MC3486NG4 are not automatically interchangeable in every BOM because suffix codes can represent different package, temperature, or qualification conditions. Perform a line-by-line comparison of the ordering table, pin functions, electrical characteristics, and environmental limits. For a direct substitution, preserve the same 16-pin footprint and verify that supply voltage, logic thresholds, enable behavior, propagation delay, and temperature coverage are equivalent.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The manufacturer datasheet identifies ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, ITU V.10, and ITU V.11 interface standards. Material-compliance declarations were not identified and are recorded as unknown.

Data verified on: 2026-11-11 — data verified and curated by XAIPART's component engineering team

Related Searches

MC3486NE4 datasheet MC3486NE4 datasheet pdf MC3486NE4 pinout MC3486NE4 specifications Texas Instruments MC3486NE4 MC3486NE4 16 pin DIP MC3486NE4 RS-422 receiver MC3486NE4 3-state outputs MC3486NE4 equivalent MC3486NE4 replacement MC3486NE4 vs HD75173P MC3486NE4 price MC3486NE4 stock MC3486NE4 application circuit

Related Components & Terms

Texas Instruments MC3486NE4 MC3486N MC3486NG4 DS3486N HD75173P quad differential line receiver differential receiver line receiver RS-422 interface RS-423 interface ANSI TIA/EIA-422-B ANSI TIA/EIA-423-B ITU V.10 ITU V.11 TTL-compatible output 3-state output high-impedance state 16-pin DIP through-hole package industrial control data communications common-mode voltage differential input
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details