Microchip Technology

MCP3426A2-E/MC - 16-Bit Dual-Channel Delta-Sigma ADC

MPN: MCP3426A2-E/MC ✓ Active
2.048 V Vdss 8-pin DFN with exposed pad, 2 x 3 mm Package
MOQ: 1 |

MCP3426A2-E/MC Overview

The Microchip Technology MCP3426A2-E/MC is a dual-channel, 16-bit delta-sigma analog-to-digital converter with differential inputs, an on-board 2.048 V precision reference, and a two-wire I2C interface. It is housed in an 8-pin DFN exposed-pad package measuring 2 x 3 mm and is specified for 3.3 V and 5 V systems. The converter supports conversion rates up to 240 SPS for single measurements and 15 SPS in continuous operation according to the family documentation.

A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling, noise shaping, and digital filtering to convert a differential analog input into a high-resolution digital code. Within the electronics hierarchy, the MCP3426 belongs to the ADC class, the analog-to-digital converter category, and the broader data-converter and semiconductor families. Its differential inputs and integrated reference make it suitable for low-level instrumentation where signal polarity and measurement accuracy are important.

The MCP3426A2-E/MC provides two analog input channels, up to 16-bit resolution, and a differential input range of ±2.048 V when using the internal 2.048 V reference. This 4096 mV differential span allows both positive and negative input voltages to be represented without separate single-ended conversion stages. Two-wire communication reduces the number of interface pins required on compact sensor, industrial, and automotive measurement boards.

The delta-sigma architecture prioritizes low noise and high accuracy rather than the highest continuous conversion rate. Single-conversion operation supports rates up to 240 SPS, while continuous conversion is identified as operating at 15 SPS. A dual-channel implementation can reduce the number of separate converters required when two related sensors must be digitized, although channel multiplexing and acquisition timing should be checked in the system design.

Typical uses include bridge and strain-gauge measurements, battery-cell monitoring, current sensing, industrial process control, portable instrumentation, and automotive sensor acquisition. Differential input architecture helps reject common-mode noise when the sensor output is referenced to a local return rather than the converter ground. The small exposed-pad DFN package also supports compact PCB layouts, but its exposed thermal pad must be connected according to the manufacturer land pattern.

For a robust layout, route the analog inputs away from digital clocks and switching power nodes, place input filtering components close to the ADC pins, and use a quiet ground reference for the measurement path. Verify the acquisition timing, conversion-rate mode, digital filter settling time, and I2C clock timing before choosing the operating mode. The exposed pad should be connected to the appropriate ground plane to improve thermal performance and reduce package-related stress.

This product overview combines the manufacturer’s device specifications with practical guidance for PCB layout, signal conditioning, differential measurement, and source selection. It also organizes compatible same-family options and their factory-programmed I2C-address differences, helping engineers identify the correct replacement before committing a PCB revision.

Drop-in alternatives for MCP3426A2-E/MC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MCP3426A2-E/MC (same form factor and footprint) — differing in Package, Differential Input Range, Digital Interface, Resolution, Supply Voltage.

Microchip Technology
Package: 8-DFN (2 x 3 mm)
Digital Interface: I2C
Microchip Technology
Package: 8-DFN, 2 x 3 mm
Differential Input Range: +/-2.048 V
Resolution: 16 bits

MCP3426A0T-E/MC

✅ Drop-In ⚠️ Specs Unverified
📦 8-DFN (2x3) with exposed pad
Factory-programmed I2C address is one of eight codes from MCP3426A2-E/MC, a 12.5% shift across the 3-bit address range; converter and package are otherwise equivalent

📋 Reference alternative (not in catalog)

MCP3426A3T-E/MC

✅ Drop-In ⚠️ Specs Unverified
📦 8-DFN (2x3) with exposed pad
Factory-programmed I2C address is one of eight codes from MCP3426A2-E/MC, a 12.5% shift across the 3-bit address range; converter and package are otherwise equivalent

📋 Reference alternative (not in catalog)

MCP3426A6T-E/MC

✅ Drop-In ⚠️ Specs Unverified
📦 8-DFN (2x3) with exposed pad
Factory-programmed I2C address is four of eight codes from MCP3426A2-E/MC, a 50% address-range difference; conversion architecture and package remain equivalent

📋 Reference alternative (not in catalog)

MCP3426A7T-E/MC

✅ Drop-In
📦 8-DFN (2x3) with exposed pad
Factory-programmed I2C address is five of eight codes from MCP3426A2-E/MC, a 62.5% address-range difference; conversion architecture and package remain equivalent

📋 Reference alternative (not in catalog)

MCP3426A2-E/MC Maximum Ratings & Electrical Characteristics

ADC Type Delta-sigma (ΣΔ)
Resolution Up to 16 bit
Number of Input Channels 2 channels
Input Architecture Differential inputs
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Maximum Conversion Rate 240 SPS
Continuous Conversion Rate 15 SPS
Digital Interface Two-wire I2C
Supply Voltage 3.3 V or 5 V
Package 8-pin DFN with exposed pad, 2 x 3 mm
Mounting Type Surface mount
Automotive Qualification AEC-Q100

MCP3426A2-E/MC 8-pin dfn with exposed pad, 2 x 3 mm Pin Configuration Guide

Pin configuration for MCP3426A2-E/MC (8-pin dfn with exposed pad, 2 x 3 mm package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

8-pin dfn with exposed pad, 2 x 3 mm package pinout diagram for MCP3426A2-E/MC

No detailed pinout data available for MCP3426A2-E/MC.

Refer to the datasheet for full pin configuration.

Typical Applications

MCP3426A2-E/MC is suitable for 6 applications: Strain-Gauge and Bridge Sensor Measurement, Battery Cell Voltage Monitoring, Industrial Current and Voltage Sensing, Automotive Sensor Acquisition, Portable Environmental Monitoring, Test and Measurement Instrumentation.

🏭

Strain-Gauge and Bridge Sensor Measurement

The MCP3426A2-E/MC fits bridge-based strain and pressure measurements because it combines two differential input channels with up to 16-bit resolution and a 2.048 V internal reference. A bridge output can be measured relative to its excitation return, reducing sensitivity to common-mode voltage in industrial wiring. The 15 SPS continuous mode supports stable low-rate monitoring, while a 240 SPS single conversion can support triggered measurements. Place input protection and filtering close to the pins, and verify excitation settling before the converter samples the bridge.

⚡

Battery Cell Voltage Monitoring

The MCP3426A2-E/MC is appropriate for multi-cell battery monitoring when paired with a suitable front end and measurement strategy. Its two differential channels permit measurement of a cell stack relative to a local tap, while the ±2.048 V differential span is useful for scaled battery dividers. The 16-bit resolution supports precise state-of-charge estimation, and the I2C interface supports frequent digital updates. Care must be taken with absolute pin voltage, cell-isolation boundaries, filtering, and ground references because the ADC itself does not provide galvanic isolation.

🏭

Industrial Current and Voltage Sensing

The MCP3426A2-E/MC can digitize differential outputs from current shunts, isolated amplifiers, and precision divider networks. Differential inputs help reject ground offsets and common-mode voltage present on industrial wiring, while the 2.048 V internal reference simplifies calibration. Two channels allow related voltage and current measurements to be acquired with one compact converter. The design should use low-thermal-resistance shunt elements, anti-alias filters near the ADC, and a layout that keeps high-current paths separate from the analog input and reference return.

🚗

Automotive Sensor Acquisition

The MCP3426A2-E/MC is suitable for compact automotive sensor acquisition where differential input signals, low noise, and AEC-Q100 identification are important. Its two channels can support paired pressure, temperature, or position sensor measurements, and the 240 SPS single-conversion mode suits event-triggered sampling. The 8-pin DFN exposed-pad package limits board area, although exposed-pad soldering and thermal cycling require careful process control. Confirm the exact temperature grade and automotive qualification status for the production design.

🧩

Portable Environmental Monitoring

The MCP3426A2-E/MC fits portable environmental instruments that monitor slow-moving signals such as gas, humidity, pressure, or temperature transducers. The 15 SPS continuous mode provides periodic digital updates without the power burden of a fast flash ADC, and the I2C interface allows a microcontroller to retrieve both differential channels efficiently. Its small 2 x 3 mm DFN package supports compact products. Designers should use low-leakage filtering components, maintain a quiet analog ground reference, and account for sensor excitation settling after each conversion cycle.

🔧

Test and Measurement Instrumentation

The MCP3426A2-E/MC is useful in laboratory and field instruments requiring two low-level differential measurements with up to 16-bit resolution. The integrated 2.048 V reference provides a defined conversion scale, and single conversions can be triggered when variable throughput is needed. I2C simplifies connection to a controller while leaving pins available for front-end controls. For accurate measurements, derive reference and excitation requirements from the external circuit, calibrate gain and offset, and isolate analog routing from digital activity to preserve the converter’s low-noise performance.

What is MCP3426A2-E/MC?
The MCP3426A2-E/MC is a dual-channel, 16-bit delta-sigma analog-to-digital converter with differential inputs, a 2.048 V internal reference, and a two-wire I2C interface. According to the Microchip MCP3426/7/8 family datasheet, the device operates from 3.3 V or 5 V and is available in an 8-pin DFN exposed-pad package. Its differential input range is ±2.048 V when the internal reference is used, making it appropriate for low-level bipolar sensor signals.
What is the resolution and conversion rate of MCP3426A2-E/MC?
The MCP3426A2-E/MC provides up to 16-bit resolution, with a maximum single-conversion rate of 240 SPS and a continuous-conversion rate of 15 SPS. According to the Microchip MCP3426/7/8 family datasheet, these operating modes provide different tradeoffs between measurement latency, conversion throughput, and internal filtering. Confirm the required acquisition sequence and settling time rather than using the 240 SPS figure as a sustained continuous-rate specification.
What is the input voltage range of MCP3426A2-E/MC?
The MCP3426A2-E/MC supports a differential input range of ±2.048 V with its internal 2.048 V precision reference. According to the Microchip MCP3426 family datasheet, the reference voltage determines the full-scale differential span. Input common-mode voltage, absolute pin limits, and the selected gain configuration must also remain within the manufacturer’s operating limits, especially when connecting bridge sensors or bipolar transducer outputs.
Where can I download the MCP3426A2-E/MC datasheet PDF?
Download the MCP3426/7/8 family datasheet from the official Microchip PDF link listed on this page. It covers the MCP3426, MCP3427, and MCP3428 devices, including resolution, differential inputs, conversion timing, digital interfaces, and package information. Use the MCP3426 sections for the target MCP3426A2-E/MC and check the ordering-information table to confirm the exact package and suffix.
Where can I find the MCP3426A2-E/MC pinout?
The MCP3426A2-E/MC pin assignment is shown in the pin-configuration and package drawings within the official Microchip MCP3426/7/8 family datasheet. The device uses an 8-pin DFN exposed-pad package, so the exposed thermal pad is not an additional signal pin. Assign tracks by using the numbered land pattern and connect the exposed pad according to the manufacturer’s recommended land-pattern drawing.
Is MCP3426A2-E/MC suitable for differential sensor measurements?
Yes, the MCP3426A2-E/MC is designed for differential measurements and provides two input channels with a ±2.048 V differential range using the internal 2.048 V reference. According to the Microchip MCP3426 family datasheet, differential operation helps measure a sensor signal relative to its local return. Add input filtering and ensure that common-mode voltage and input protection suit the sensor’s operating range.
MCP3426A2-E/MC vs MCP3426A2T-E/MC — which should I choose?
MCP3426A2-E/MC and MCP3426A2T-E/MC identify the same Microchip MCP3426 electrical configuration in different orderable package formats. The manufacturer comparison identifies both as 16-bit, two-channel, surface-mount devices in 8-pin DFN exposed-pad packages. Choose based on the required assembly and delivery format rather than expecting a change in resolution, differential range, or conversion performance.
What can replace MCP3426A2-E/MC without changing the PCB?
The closest drop-in choices are other MCP3426 factory-address variants in the same 8-pin DFN exposed-pad package, including MCP3426A0T-E/MC, MCP3426A3T-E/MC, MCP3426A6T-E/MC, and MCP3426A7T-E/MC. These use the same converter family and footprint, but their factory-programmed I2C addresses differ. Confirm the bus address, conversion mode, supply level, and timing before substitution.
When should I choose MCP3426A2-E/MC over another MCP3426 variant?
Choose MCP3426A2-E/MC when the board requires the A2 factory-programmed I2C address, two differential channels, up to 16-bit resolution, and the 8-pin DFN exposed-pad footprint. Select another A-code variant only when its programmed address avoids a collision on the same I2C bus and the remaining electrical specifications remain acceptable. Verify the ordering code and package rather than substituting solely by resolution.
Is there a cross-brand drop-in equivalent for MCP3426A2-E/MC?
No cross-brand drop-in equivalent is established for the MCP3426A2-E/MC in the available manufacturer and parametric cross-reference information. A valid replacement must reproduce the 8-pin DFN exposed-pad footprint, dual differential input architecture, I2C behavior, reference arrangement, and electrical timing. A converter with similar resolution alone is not pin-to-pin compatible, so the same-family Microchip address variants are the safer starting point.
Where can I buy MCP3426A2-E/MC and check the current lead time?
Use the Request a Quote form on this page to request the current MCP3426A2-E/MC quotation, stock position, and lead time for the required order quantity. The manufacturer’s MCP3426 product page and MCP3426/7/8 family datasheet provide the technical basis for the listing. Provide the target quantity, delivery country, and tube or other required packing instruction with the request.
What is the price of MCP3426A2-E/MC?
The current MCP3426A2-E/MC price is generated through the Request a Quote form on this page rather than being stated in static product text. Submit the required quantity and packing preference to obtain a purchase quotation and availability confirmation. This approach also allows the distributor to account for exact suffix matching, delivery location, and any lot-specific supply conditions.
Is MCP3426A2-E/MC in stock?
Stock for the exact MCP3426A2-E/MC suffix should be confirmed through the Request a Quote form on this page. Availability can differ by package format, order quantity, and delivery region, so an MCP3426 family listing without the complete suffix is not sufficient. Include your required quantity and target date when requesting an inventory update.
How should the exposed pad and analog layout be handled?
Connect the MCP3426A2-E/MC exposed pad using the manufacturer’s recommended 8-pin DFN land pattern and thermal-via arrangement. Place analog input traces away from I2C clock lines and switching-regulator nodes, and place input filtering close to the ADC pins. A continuous ground reference under the analog section reduces return-path disturbance, while the exposed pad provides the intended thermal and mechanical connection.
What are the key specifications engineers should know about MCP3426A2-E/MC?
The key specifications are two differential input channels, up to 16-bit resolution, a 2.048 V internal reference, ±2.048 V differential input range, a two-wire I2C interface, and operation from 3.3 V or 5 V. According to the Microchip MCP3426/7/8 family datasheet, the converter supports 240 SPS single conversions and 15 SPS continuous conversion. The package is an 8-pin DFN exposed-pad construction in a 2 x 3 mm footprint.
Is MCP3426A2-E/MC qualified for automotive applications?
The MCP3426A2-E/MC is identified as an AEC-Q100 automotive 16-bit dual-channel ADC in distributor product information. It uses differential inputs and supports 3.3 V and 5 V operation, making it suitable for automotive sensing architectures when the complete device rating, temperature grade, AEC-Q100 classification, and application requirements are confirmed against the current Microchip documentation.

Engineering reference data for MCP3426A2-E/MC — comparison, design guidance, and compliance information.

Selection Guide

Choose MCP3426A2-E/MC when the PCB requires the A2 factory-programmed I2C address and the design needs two differential channels with up to 16-bit resolution. Its 2.048 V internal reference establishes a ±2.048 V differential range, while 240 SPS single conversions and 15 SPS continuous conversion cover triggered and steady-state measurement modes. MCP3426A0T-E/MC or MCP3426A3T-E/MC are preferable when their one-code address difference resolves an I2C conflict. MCP3426A6T-E/MC or MCP3426A7T-E/MC can also retain the same converter and package, but their farther-separated factory addresses require a more substantial firmware change. No cross-brand part should be selected solely because it offers 16-bit resolution; it must also reproduce the 8-pin DFN exposed-pad pinout, differential input behavior, reference arrangement, timing, and I2C transaction structure.

Comparison with Alternatives

Parameter This Product MCP3426A0T-E/MC MCP3426A3T-E/MC MCP3426A6T-E/MC MCP3426A7T-E/MC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-DFN (2x3) with exposed pad 8-DFN (2x3) with exposed pad 8-DFN (2x3) with exposed pad 8-DFN (2x3) with exposed pad 8-DFN (2x3) with exposed pad
Resolution Up to 16 bit Up to 16 bit Up to 16 bit Up to 16 bit Up to 16 bit
Input Channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels
ADC Architecture Delta-sigma Delta-sigma Delta-sigma Delta-sigma Delta-sigma
Internal Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Differential Input Range ±2.048 V ±2.048 V ±2.048 V ±2.048 V ±2.048 V
Maximum Conversion Rate 240 SPS 240 SPS 240 SPS 240 SPS 240 SPS
Continuous Conversion Rate 15 SPS 15 SPS 15 SPS 15 SPS 15 SPS
Digital Interface Two-wire I2C Two-wire I2C Two-wire I2C Two-wire I2C Two-wire I2C
Factory-Programmed I2C Address A2 address code A0 address code A3 address code A6 address code A7 address code

Key Differentiators

  • Combines two differential channels with up to 16-bit resolution (vs MCP3426A7T-E/MC)
  • Uses the A2 factory-programmed I2C address code (vs MCP3426A0T-E/MC)
  • Provides a defined differential input span without external reference wiring (vs MCP3426A6T-E/MC)
  • Supports 240 SPS triggered measurements and 15 SPS continuous conversion (vs MCP3426A3T-E/MC)

Design Notes

Route the two differential inputs as short, tightly coupled traces and keep them away from I2C clock lines, switching nodes, and high-current return paths. Place input resistors or capacitors at the ADC side of the board so that ESD and surge-current energy is diverted before reaching the pins. Maintain a continuous analog ground reference beneath the measurement section and follow the manufacturer’s exposed-pad land pattern with thermal vias where the PCB process permits.

The MCP3426A2-E/MC can accept differential input voltages of ±2.048 V with the internal reference, but the common-mode voltage and absolute maximum pin limits remain separate constraints. Verify the sensor output during startup, fault, and shutdown states before applying protection components. Use low-leakage protection parts when measuring high-impedance sources, and place filtering close to the ADC rather than beside the sensor.

Do not treat the 240 SPS single-conversion capability as a sustained continuous conversion rate. The continuous mode is identified as 15 SPS, and digital-filter settling must be included in the measurement schedule. Also verify the factory-programmed I2C address before substitution: changing from the A2 code to A0, A3, A6, or A7 can prevent the controller from communicating even when the PCB footprint remains unchanged.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Distributor product information identifies MCP3426A2-E/MC as an automotive AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established from the available manufacturer and distributor information.

Data verified on: 2026-11-20 — data verified and curated by XAIPART's component engineering team

Related Searches

MCP3426A2-E/MC MCP3426A2-E/MC datasheet MCP3426A2-E/MC datasheet pdf MCP3426A2-E/MC pinout MCP3426A2-E/MC equivalent MCP3426A2-E/MC replacement MCP3426A2-E/MC cross reference MCP3426A2-E/MC vs MCP3426A7T-E/MC MCP3426A2-E/MC price MCP3426A2-E/MC stock Microchip MCP3426A2-E/MC MCP3426 16-bit dual channel ADC

Related Components & Terms

Microchip Technology MCP3426A2-E/MC MCP3426 MCP3426A0T-E/MC MCP3426A3T-E/MC MCP3426A6T-E/MC MCP3426A7T-E/MC analog-to-digital converter ADC delta-sigma ADC data converter semiconductor differential input 16-bit resolution 2.048 V precision reference ±2.048 V input range I2C two-wire interface 8-DFN exposed-pad package QFN family surface-mount package AEC-Q100 bridge sensor battery monitoring
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details