MCP3426A2-E/MC - 16-Bit Dual-Channel Delta-Sigma ADC
MPN: MCP3426A2-E/MC ✓ نشطMCP3426A2-E/MC نظرة عامة
A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling, noise shaping, and digital filtering to convert a differential analog input into a high-resolution digital code. Within the electronics hierarchy, the MCP3426 belongs to the ADC class, the analog-to-digital converter category, and the broader data-converter and semiconductor families. Its differential inputs and integrated reference make it suitable for low-level instrumentation where signal polarity and measurement accuracy are important.
The MCP3426A2-E/MC provides two analog input channels, up to 16-bit resolution, and a differential input range of ±2.048 V when using the internal 2.048 V reference. This 4096 mV differential span allows both positive and negative input voltages to be represented without separate single-ended conversion stages. Two-wire communication reduces the number of interface pins required on compact sensor, industrial, and automotive measurement boards.
The delta-sigma architecture prioritizes low noise and high accuracy rather than the highest continuous conversion rate. Single-conversion operation supports rates up to 240 SPS, while continuous conversion is identified as operating at 15 SPS. A dual-channel implementation can reduce the number of separate converters required when two related sensors must be digitized, although channel multiplexing and acquisition timing should be checked in the system design.
Typical uses include bridge and strain-gauge measurements, battery-cell monitoring, current sensing, industrial process control, portable instrumentation, and automotive sensor acquisition. Differential input architecture helps reject common-mode noise when the sensor output is referenced to a local return rather than the converter ground. The small exposed-pad DFN package also supports compact PCB layouts, but its exposed thermal pad must be connected according to the manufacturer land pattern.
For a robust layout, route the analog inputs away from digital clocks and switching power nodes, place input filtering components close to the ADC pins, and use a quiet ground reference for the measurement path. Verify the acquisition timing, conversion-rate mode, digital filter settling time, and I2C clock timing before choosing the operating mode. The exposed pad should be connected to the appropriate ground plane to improve thermal performance and reduce package-related stress.
This product overview combines the manufacturer’s device specifications with practical guidance for PCB layout, signal conditioning, differential measurement, and source selection. It also organizes compatible same-family options and their factory-programmed I2C-address differences, helping engineers identify the correct replacement before committing a PCB revision.
بدائل مباشرة لـ MCP3426A2-E/MC — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MCP3426A2-E/MC (نفس عامل الشكل والبصمة) — يختلف في Package, Differential Input Range, Digital Interface, Resolution, Supply Voltage.
MCP3426A0T-E/MC
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MCP3426A3T-E/MC
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MCP3426A6T-E/MC
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MCP3426A7T-E/MC
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MCP3426A2-E/MC الحدود القصوى والخصائص الكهربائية
| ADC Type | Delta-sigma (ΣΔ) |
| الدقة | Up to 16 bit |
| Number of Input Channels | 2 channels |
| Input Architecture | Differential inputs |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Maximum Conversion Rate | 240 SPS |
| Continuous Conversion Rate | 15 SPS |
| Digital Interface | Two-wire I2C |
| جهد التغذية | 3.3 V or 5 V |
| العلبة | 8-pin DFN with exposed pad, 2 x 3 mm |
| نوع التركيب | Surface mount |
| Automotive Qualification | AEC-Q100 |
دليل تكوين أطراف MCP3426A2-E/MC 8-pin dfn with exposed pad, 2 x 3 mm
تكوين الأطراف لـ MCP3426A2-E/MC (حزمة 8-pin dfn with exposed pad, 2 x 3 mm). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MCP3426A2-E/MC.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MCP3426A2-E/MC مناسب لـ 6 التطبيقs: Strain-Gauge and Bridge Sensor Measurement, Battery Cell Voltage Monitoring, Industrial Current and Voltage Sensing, Automotive Sensor Acquisition, Portable Environmental Monitoring, Test and Measurement Instrumentation.
Strain-Gauge and Bridge Sensor Measurement
The MCP3426A2-E/MC fits bridge-based strain and pressure measurements because it combines two differential input channels with up to 16-bit resolution and a 2.048 V internal reference. A bridge output can be measured relative to its excitation return, reducing sensitivity to common-mode voltage in industrial wiring. The 15 SPS continuous mode supports stable low-rate monitoring, while a 240 SPS single conversion can support triggered measurements. Place input protection and filtering close to the pins, and verify excitation settling before the converter samples the bridge.
موصى به
Battery Cell Voltage Monitoring
The MCP3426A2-E/MC is appropriate for multi-cell battery monitoring when paired with a suitable front end and measurement strategy. Its two differential channels permit measurement of a cell stack relative to a local tap, while the ±2.048 V differential span is useful for scaled battery dividers. The 16-bit resolution supports precise state-of-charge estimation, and the I2C interface supports frequent digital updates. Care must be taken with absolute pin voltage, cell-isolation boundaries, filtering, and ground references because the ADC itself does not provide galvanic isolation.
موصى به
Industrial Current and Voltage Sensing
The MCP3426A2-E/MC can digitize differential outputs from current shunts, isolated amplifiers, and precision divider networks. Differential inputs help reject ground offsets and common-mode voltage present on industrial wiring, while the 2.048 V internal reference simplifies calibration. Two channels allow related voltage and current measurements to be acquired with one compact converter. The design should use low-thermal-resistance shunt elements, anti-alias filters near the ADC, and a layout that keeps high-current paths separate from the analog input and reference return.
موصى به
Automotive Sensor Acquisition
The MCP3426A2-E/MC is suitable for compact automotive sensor acquisition where differential input signals, low noise, and AEC-Q100 identification are important. Its two channels can support paired pressure, temperature, or position sensor measurements, and the 240 SPS single-conversion mode suits event-triggered sampling. The 8-pin DFN exposed-pad package limits board area, although exposed-pad soldering and thermal cycling require careful process control. Confirm the exact temperature grade and automotive qualification status for the production design.
موصى به
Portable Environmental Monitoring
The MCP3426A2-E/MC fits portable environmental instruments that monitor slow-moving signals such as gas, humidity, pressure, or temperature transducers. The 15 SPS continuous mode provides periodic digital updates without the power burden of a fast flash ADC, and the I2C interface allows a microcontroller to retrieve both differential channels efficiently. Its small 2 x 3 mm DFN package supports compact products. Designers should use low-leakage filtering components, maintain a quiet analog ground reference, and account for sensor excitation settling after each conversion cycle.
موصى به
Test and Measurement Instrumentation
The MCP3426A2-E/MC is useful in laboratory and field instruments requiring two low-level differential measurements with up to 16-bit resolution. The integrated 2.048 V reference provides a defined conversion scale, and single conversions can be triggered when variable throughput is needed. I2C simplifies connection to a controller while leaving pins available for front-end controls. For accurate measurements, derive reference and excitation requirements from the external circuit, calibrate gain and offset, and isolate analog routing from digital activity to preserve the converter’s low-noise performance.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MCP3426A2-E/MC — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MCP3426A0T-E/MC | MCP3426A3T-E/MC | MCP3426A6T-E/MC | MCP3426A7T-E/MC |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-DFN (2x3) with exposed pad | 8-DFN (2x3) with exposed pad | 8-DFN (2x3) with exposed pad | 8-DFN (2x3) with exposed pad | 8-DFN (2x3) with exposed pad |
| Resolution | Up to 16 bit | Up to 16 bit | Up to 16 bit | Up to 16 bit | Up to 16 bit |
| Input Channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels |
| ADC Architecture | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Differential Input Range | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V |
| Maximum Conversion Rate | 240 SPS | 240 SPS | 240 SPS | 240 SPS | 240 SPS |
| Continuous Conversion Rate | 15 SPS | 15 SPS | 15 SPS | 15 SPS | 15 SPS |
| Digital Interface | Two-wire I2C | Two-wire I2C | Two-wire I2C | Two-wire I2C | Two-wire I2C |
| Factory-Programmed I2C Address | A2 address code | A0 address code | A3 address code | A6 address code | A7 address code |
أبرز الفروقات
- Combines two differential channels with up to 16-bit resolution (مقابلMCP3426A7T-E/MC)
- Uses the A2 factory-programmed I2C address code (مقابلMCP3426A0T-E/MC)
- Provides a defined differential input span without external reference wiring (مقابلMCP3426A6T-E/MC)
- Supports 240 SPS triggered measurements and 15 SPS continuous conversion (مقابلMCP3426A3T-E/MC)
ملاحظات التصميم
Route the two differential inputs as short, tightly coupled traces and keep them away from I2C clock lines, switching nodes, and high-current return paths. Place input resistors or capacitors at the ADC side of the board so that ESD and surge-current energy is diverted before reaching the pins. Maintain a continuous analog ground reference beneath the measurement section and follow the manufacturer’s exposed-pad land pattern with thermal vias where the PCB process permits.
The MCP3426A2-E/MC can accept differential input voltages of ±2.048 V with the internal reference, but the common-mode voltage and absolute maximum pin limits remain separate constraints. Verify the sensor output during startup, fault, and shutdown states before applying protection components. Use low-leakage protection parts when measuring high-impedance sources, and place filtering close to the ADC rather than beside the sensor.
Do not treat the 240 SPS single-conversion capability as a sustained continuous conversion rate. The continuous mode is identified as 15 SPS, and digital-filter settling must be included in the measurement schedule. Also verify the factory-programmed I2C address before substitution: changing from the A2 code to A0, A3, A6, or A7 can prevent the controller from communicating even when the PCB footprint remains unchanged.
معلومات الامتثال
Distributor product information identifies MCP3426A2-E/MC as an automotive AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established from the available manufacturer and distributor information.