MCP3426A2-E/SN - 16-Bit Dual-Channel ADC | Microchip
MPN: MCP3426A2-E/SN ✓ ActiveMCP3426A2-E/SN Overview
A delta-sigma ADC is an analog-to-digital converter category that uses continuous-time delta-sigma modulation and digital filtering to produce high-resolution conversion results. Within the semiconductor hierarchy, the MCP3426A2-E/SN is an ADC, then a data-converter IC, then an integrated circuit and semiconductor. Its internal reference, differential input architecture, and I2C-oriented interface make it suitable for sensors and measurement systems where analog signals must be converted into digital data for processing by a microcontroller or embedded controller.
The converter offers up to 16-bit resolution, two differential input channels, and conversion rates up to 15 SPS. Its differential input arrangement helps reject common-mode noise when the sensor and analog front end share a suitable ground reference. The internal 2.048 V reference reduces the number of external precision components required, while the gain selection determines the effective full-scale input range. The -40°C to +125°C operating range supports industrial, instrumentation, and automotive-oriented equipment.
The MCP3426 belongs to the low-noise, high-accuracy MCP342X converter family, which includes the MCP3426, MCP3427, and MCP3428. MCP3426 is the two-channel member, while MCP3427 and MCP3428 provide one- and four-channel configurations respectively. The MCP3426 family combines a delta-sigma conversion core with an onboard reference and serial digital interface, making it practical for current monitoring, bridge-sensor measurement, portable instrumentation, and low-rate precision data acquisition.
Typical uses include battery-cell monitoring, industrial pressure and temperature acquisition, potentiometer and sensor interfaces, and low-frequency process-control measurements. Differential inputs suit Wheatstone-bridge sensors because the converter measures the small voltage between two sensor terminals rather than the larger common-mode voltage. The 15 SPS maximum rate is suitable for slow-changing measurements rather than high-speed waveform acquisition.
Design the analog input network so that common-mode voltage and differential signal amplitude remain inside the converter's operating limits. Place input filtering and protection components close to the corresponding pins, maintain a low-noise ground path, and decouple the supply close to VDD. When replacing an earlier gain option, verify the selected full-scale range, input impedance, and noise behavior against the source impedance rather than relying only on package compatibility.
This product page combines the manufacturer's device characteristics, exact-package sourcing information, family-level alternatives, application guidance, and PCB-level implementation notes to help engineers evaluate the MCP3426A2-E/SN before integrating a dual-channel 16-bit delta-sigma ADC.
Drop-in alternatives for MCP3426A2-E/SN — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MCP3426A2-E/SN (same form factor and footprint) — differing in Package, Differential Input Range, Operating Temperature Range, ADC Type, Conversion Rate.
MCP3426A1-E/SN
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →MCP3426A3-E/SN
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MCP3426A4-E/SN
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →MCP3426A5-E/SN
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →MCP3426A6-E/SN
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MCP3426A2-E/SN Maximum Ratings & Electrical Characteristics
| Resolution | Up to 16 bits |
| Number of Input Channels | 2 channels |
| Input Architecture | Differential inputs |
| Conversion Type | 16-bit delta-sigma ADC |
| Maximum Conversion Rate | 15 SPS |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Operating Temperature Range | -40°C to +125°C |
| Package | 8-pin SOIC, 3.90 mm body width |
| Mounting Type | Surface mount |
| Shipping Package | Tube |
| Automotive Qualification | AEC-Q100 |
| Converter Family | MCP342X series |
MCP3426A2-E/SN Pin Configuration
| Pin 1 | VDD — Positive analog and digital supply voltage |
| Pin 2 | VSS — Ground reference |
| Pin 3 | VIN0+ — Non-inverting input for channel 0 |
| Pin 4 | VIN0- — Inverting input for channel 0 |
| Pin 5 | VIN1+ — Non-inverting input for channel 1 |
| Pin 6 | VIN1- — Inverting input for channel 1 |
| Pin 7 | SCL — Serial clock input |
| Pin 8 | SDA — Serial data input and output |
Typical Applications
MCP3426A2-E/SN is suitable for 6 applications: Battery Cell Monitoring, Industrial Pressure Sensing, Temperature and Thermocouple Acquisition, Precision Current Measurement, Process and Environmental Monitoring, Instrumentation and Data Acquisition.
Battery Cell Monitoring
The MCP3426A2-E/SN is suited to dual-cell or dual-rail battery monitoring because it provides two differential inputs, up to 16-bit resolution, and conversion rates up to 15 SPS. Place each cell connection through a scaled differential network so the voltage presented to the converter remains within its ±2.048 V differential range. The two-channel architecture reduces component count compared with using separate converters. Its 2.048 V internal reference supports repeatable measurements, while the 2.7 V to 5.5 V supply range permits operation from a regulated system rail. A practical design should include input filtering, protection from transient battery events, and a ground arrangement that keeps cell current paths away from the converter return.
Recommended
Industrial Pressure Sensing
The MCP3426A2-E/SN fits industrial pressure measurement when the sensor produces a small differential signal across a bridge network. Differential inputs allow the converter to measure the bridge imbalance while rejecting common-mode voltage present on both sensor lines. The 16-bit resolution and 15 SPS maximum rate are appropriate for pressure signals that change more slowly than industrial process transients. Use the A2 gain only when the conditioned bridge voltage fits its effective full-scale range; otherwise use another MCP3426 gain option. Keep input traces short, place filtering close to the converter, and isolate motor drives, relays, and switching supplies from the sensitive analog return path.
Recommended
Temperature and Thermocouple Acquisition
The MCP3426A2-E/SN can acquire two low-frequency temperature channels where a differential signal and modest resolution are sufficient. It may support resistive temperature sensors conditioned into a differential bridge or low-level voltage outputs from suitable sensing elements. The 15 SPS rate captures slowly varying temperature without the energy and data burden of a high-rate converter. Verify that the sensor's output amplitude, common-mode voltage, and noise match the A2 input range. Input protection should tolerate sensor faults, and the digital interface wiring should remain away from high-current switching nodes. Firmware should also reject samples during sensor settling and identify open or shorted channels.
Recommended
Precision Current Measurement
The MCP3426A2-E/SN is useful for monitoring two low-current or low-voltage shunt signals when the converter's 16-bit resolution provides the required measurement resolution. A shunt produces a differential voltage proportional to current, which aligns directly with the converter's differential inputs. Select the A2 gain after calculating the maximum expected shunt voltage so that normal current remains below the clipping threshold while small currents still use enough of the converter's range. Keep the shunt return and converter ground path compact, use Kelvin routing where practical, and avoid sharing high-current copper paths with the analog ground. The 15 SPS conversion rate suits energy or process monitoring rather than instantaneous overcurrent protection.
Recommended
Process and Environmental Monitoring
The MCP3426A2-E/SN supports compact environmental monitoring systems that must acquire two slowly changing sensor channels. Its dual differential inputs, onboard 2.048 V reference, and 16-bit conversion resolution provide a practical combination for humidity, gas, level, or resistive sensing front ends. The converter's 15 SPS maximum rate is ample for periodic sampling and helps reduce average power in battery-powered equipment. The analog section should be separated from switching regulators and digital clocks, with filtering placed at the input pins. Firmware can average successive readings, compensate for sensor offset, and reject outliers, but averaging must not conceal saturation caused by choosing the wrong gain.
Recommended
Instrumentation and Data Acquisition
The MCP3426A2-E/SN is appropriate for low-speed precision instrumentation where two analog channels must be digitized for an embedded controller. It can capture differential outputs from amplifiers, resistive dividers, or laboratory sensor interfaces while limiting the system to an 8-pin SOIC footprint. The internal reference simplifies the analog subsystem, and the 15 SPS conversion rate aligns with periodic measurements and remote telemetry. For best results, use a quiet supply, place local bypass capacitance at VDD, route the serial interface away from sensitive inputs, and define a stable analog ground region. The firmware should support offset and gain calibration because the selected MCP3426 gain determines the usable signal range and conversion behavior.
Recommended
Recommended Products Summary
Engineering reference data for MCP3426A2-E/SN — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MCP3426A1-E/SN | MCP3426A3-E/SN | MCP3426A4-E/SN | MCP3426A5-E/SN | MCP3426A6-E/SN |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Resolution | Up to 16 bits | Up to 16 bits | Up to 16 bits | Up to 16 bits | Up to 16 bits | Up to 16 bits |
| Input Channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels |
| Conversion Rate | Up to 15 SPS | Up to 15 SPS | Up to 15 SPS | Up to 15 SPS | Up to 15 SPS | Up to 15 SPS |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Gain Configuration | Gain 2 | Gain 1 | Gain 4 | Gain 8 | Gain 16 | Gain 32 |
| Conversion Architecture | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
Key Differentiators
- Two differential inputs in an 8-pin footprint (vs MCP3427)
- Higher gain than the A1 option (vs MCP3426A1-E/SN)
- Balanced signal range for differential sensing (vs MCP3426A3-E/SN)
- Integrated precision reference (vs MCP3428)
Design Notes
Route the two differential input pairs as short, matched traces and connect each pair to its converter pins without sharing sensitive return paths with motors, relays, or switching-regulator returns. Place any input-series resistors and filter capacitors close to the appropriate VIN pins. Differential layout helps preserve common-mode rejection, while keeping high-current paths away from the analog ground reduces error in the converted result.
Decouple the VDD pin directly at the package with a local high-frequency ceramic capacitor and the bulk capacitance specified by the manufacturer's application guidance. Keep the 2.7 V to 5.5 V supply within its operating limits and avoid routing the converter's supply through the same impedance as analog sensor currents. A quiet reference and supply are especially important when the design seeks the full benefit of the converter's 16-bit resolution.
Do not select the converter only by package or nominal resolution. First determine the maximum differential input at normal, transient, and fault conditions; then choose the MCP3426 gain option that keeps the signal within range while using adequate ADC scale. Replacing A2 with another gain version can preserve the footprint but radically change the full-scale input span, noise contribution, and clipping margin.
Treat the analog inputs as high-impedance measurement nodes. Minimize leakage around the input pins, use low-leakage protection components, and avoid unnecessary high-value resistive networks that can degrade accuracy. Verify settling after channel switching and discard initial readings when necessary. Firmware should also include saturation detection, because an over-range input can otherwise look like a valid extreme measurement.
Compliance Information
The MCP3426A2-E/SN is identified as AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.