Microchip Technology

MCP3426A2-E/SN - 16-Bit Dual-Channel ADC | Microchip

MPN: MCP3426A2-E/SN ✓ Aktif
2.048 V Vdss 8-pin SOIC, 3.90 mm body width Package
MOQ: 1 |

MCP3426A2-E/SN Genel Bakış

Microchip Technology MCP3426A2-E/SN is a 16-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, up to 15 samples per second, and an 8-pin SOIC package. It includes an onboard 2.048 V precision reference, allowing a differential input range of ±2.048 V. The A2 gain configuration provides useful sensitivity for low-level differential signals while retaining the resolution and noise performance associated with the MCP3426 family.

A delta-sigma ADC is an analog-to-digital converter category that uses continuous-time delta-sigma modulation and digital filtering to produce high-resolution conversion results. Within the semiconductor hierarchy, the MCP3426A2-E/SN is an ADC, then a data-converter IC, then an integrated circuit and semiconductor. Its internal reference, differential input architecture, and I2C-oriented interface make it suitable for sensors and measurement systems where analog signals must be converted into digital data for processing by a microcontroller or embedded controller.

The converter offers up to 16-bit resolution, two differential input channels, and conversion rates up to 15 SPS. Its differential input arrangement helps reject common-mode noise when the sensor and analog front end share a suitable ground reference. The internal 2.048 V reference reduces the number of external precision components required, while the gain selection determines the effective full-scale input range. The -40°C to +125°C operating range supports industrial, instrumentation, and automotive-oriented equipment.

The MCP3426 belongs to the low-noise, high-accuracy MCP342X converter family, which includes the MCP3426, MCP3427, and MCP3428. MCP3426 is the two-channel member, while MCP3427 and MCP3428 provide one- and four-channel configurations respectively. The MCP3426 family combines a delta-sigma conversion core with an onboard reference and serial digital interface, making it practical for current monitoring, bridge-sensor measurement, portable instrumentation, and low-rate precision data acquisition.

Typical uses include battery-cell monitoring, industrial pressure and temperature acquisition, potentiometer and sensor interfaces, and low-frequency process-control measurements. Differential inputs suit Wheatstone-bridge sensors because the converter measures the small voltage between two sensor terminals rather than the larger common-mode voltage. The 15 SPS maximum rate is suitable for slow-changing measurements rather than high-speed waveform acquisition.

Design the analog input network so that common-mode voltage and differential signal amplitude remain inside the converter's operating limits. Place input filtering and protection components close to the corresponding pins, maintain a low-noise ground path, and decouple the supply close to VDD. When replacing an earlier gain option, verify the selected full-scale range, input impedance, and noise behavior against the source impedance rather than relying only on package compatibility.

This product page combines the manufacturer's device characteristics, exact-package sourcing information, family-level alternatives, application guidance, and PCB-level implementation notes to help engineers evaluate the MCP3426A2-E/SN before integrating a dual-channel 16-bit delta-sigma ADC.

Drop-in alternatifler için MCP3426A2-E/SN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MCP3426A2-E/SN (aynı form faktörü ve ayağa oturma) — farklı olan Package, Differential Input Range, Operating Temperature Range, ADC Type, Conversion Rate.

Microchip Technology
Package: 8-pin SOIC
Differential Input Range: -2.048 V to +2.048 V
Operating Temperature Range: -40 degrees C to +125 degrees C
Microchip Technology
Package: 8-pin SOIC, 0.154 in (3.90 mm) wide
Differential Input Range: ±2.048 V differential
ADC Type: Delta-sigma ADC
Microchip Technology
Package: 8-pin SOIC
Operating Temperature Range: -40 °C to +125 °C
ADC Type: Sigma-delta
Microchip Technology
Package: 8-SOIC, 3.90 mm width
Operating Temperature Range: -40 °C to +125 °C
ADC Type: Sigma-delta ADC

MCP3426A1-E/SN

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Microchip Technology
📦 8-SOIC
Delta-sigma ADC · Up to 16 bits · 2 · Differential · 15 samples/s · 2.048 V · ±2.048 V differential · 2.7 V to 5.5 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MCP3426A3-E/SN

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-SOIC
Uses gain 4 instead of gain 2, reducing the full-scale differential input span by 50% while retaining the 16-bit, 2-channel, 15 SPS architecture

📋 Katalogda Olmayan Referans Alternatifi

MCP3426A4-E/SN

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Microchip Technology
📦 8-SOIC
Sigma-delta · 16 bit · 2 channels · 240 samples/s · 15 samples/s · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MCP3426A5-E/SN

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Microchip Technology
📦 8-SOIC
Sigma-delta ADC · 16 bit · 2 channels · 1 ADC · Differential · 15 SPS · 2.048 V · ±2.048 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MCP3426A6-E/SN

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-SOIC
Uses gain 32 instead of gain 2, reducing the full-scale differential input span by 93.75% while retaining the 16-bit, 2-channel, 15 SPS architecture

📋 Katalogda Olmayan Referans Alternatifi

MCP3426A2-E/SN Maksimum Değerlendirmeler & Elektriksel Özellikler

Çözünürlük Up to 16 bits
Number of Input Channels 2 channels
Input Architecture Differential inputs
Conversion Type 16-bit delta-sigma ADC
Maximum Conversion Rate 15 SPS
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Supply Voltage Range 2.7 V to 5.5 V
İşletim Sıcaklığı Aralığı -40°C to +125°C
Paket 8-pin SOIC, 3.90 mm body width
Montaj Türü Surface mount
Shipping Package Tube
Automotive Qualification AEC-Q100
Converter Family MCP342X series

MCP3426A2-E/SN Pin Yapısı

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 VDD — Positive analog and digital supply voltage
Pin 2 VSS — Ground reference
Pin 3 VIN0+ — Non-inverting input for channel 0
Pin 4 VIN0- — Inverting input for channel 0
Pin 5 VIN1+ — Non-inverting input for channel 1
Pin 6 VIN1- — Inverting input for channel 1
Pin 7 SCL — Serial clock input
Pin 8 SDA — Serial data input and output

Tipik Uygulamalar

MCP3426A2-E/SN için uygundur 6 uygulamas: Battery Cell Monitoring, Industrial Pressure Sensing, Temperature and Thermocouple Acquisition, Precision Current Measurement, Process and Environmental Monitoring, Instrumentation and Data Acquisition.

⚡

Battery Cell Monitoring

The MCP3426A2-E/SN is suited to dual-cell or dual-rail battery monitoring because it provides two differential inputs, up to 16-bit resolution, and conversion rates up to 15 SPS. Place each cell connection through a scaled differential network so the voltage presented to the converter remains within its ±2.048 V differential range. The two-channel architecture reduces component count compared with using separate converters. Its 2.048 V internal reference supports repeatable measurements, while the 2.7 V to 5.5 V supply range permits operation from a regulated system rail. A practical design should include input filtering, protection from transient battery events, and a ground arrangement that keeps cell current paths away from the converter return.

🏭

Industrial Pressure Sensing

The MCP3426A2-E/SN fits industrial pressure measurement when the sensor produces a small differential signal across a bridge network. Differential inputs allow the converter to measure the bridge imbalance while rejecting common-mode voltage present on both sensor lines. The 16-bit resolution and 15 SPS maximum rate are appropriate for pressure signals that change more slowly than industrial process transients. Use the A2 gain only when the conditioned bridge voltage fits its effective full-scale range; otherwise use another MCP3426 gain option. Keep input traces short, place filtering close to the converter, and isolate motor drives, relays, and switching supplies from the sensitive analog return path.

🌡️

Temperature and Thermocouple Acquisition

The MCP3426A2-E/SN can acquire two low-frequency temperature channels where a differential signal and modest resolution are sufficient. It may support resistive temperature sensors conditioned into a differential bridge or low-level voltage outputs from suitable sensing elements. The 15 SPS rate captures slowly varying temperature without the energy and data burden of a high-rate converter. Verify that the sensor's output amplitude, common-mode voltage, and noise match the A2 input range. Input protection should tolerate sensor faults, and the digital interface wiring should remain away from high-current switching nodes. Firmware should also reject samples during sensor settling and identify open or shorted channels.

🔧

Precision Current Measurement

The MCP3426A2-E/SN is useful for monitoring two low-current or low-voltage shunt signals when the converter's 16-bit resolution provides the required measurement resolution. A shunt produces a differential voltage proportional to current, which aligns directly with the converter's differential inputs. Select the A2 gain after calculating the maximum expected shunt voltage so that normal current remains below the clipping threshold while small currents still use enough of the converter's range. Keep the shunt return and converter ground path compact, use Kelvin routing where practical, and avoid sharing high-current copper paths with the analog ground. The 15 SPS conversion rate suits energy or process monitoring rather than instantaneous overcurrent protection.

🧩

Process and Environmental Monitoring

The MCP3426A2-E/SN supports compact environmental monitoring systems that must acquire two slowly changing sensor channels. Its dual differential inputs, onboard 2.048 V reference, and 16-bit conversion resolution provide a practical combination for humidity, gas, level, or resistive sensing front ends. The converter's 15 SPS maximum rate is ample for periodic sampling and helps reduce average power in battery-powered equipment. The analog section should be separated from switching regulators and digital clocks, with filtering placed at the input pins. Firmware can average successive readings, compensate for sensor offset, and reject outliers, but averaging must not conceal saturation caused by choosing the wrong gain.

📟

Instrumentation and Data Acquisition

The MCP3426A2-E/SN is appropriate for low-speed precision instrumentation where two analog channels must be digitized for an embedded controller. It can capture differential outputs from amplifiers, resistive dividers, or laboratory sensor interfaces while limiting the system to an 8-pin SOIC footprint. The internal reference simplifies the analog subsystem, and the 15 SPS conversion rate aligns with periodic measurements and remote telemetry. For best results, use a quiet supply, place local bypass capacitance at VDD, route the serial interface away from sensitive inputs, and define a stable analog ground region. The firmware should support offset and gain calibration because the selected MCP3426 gain determines the usable signal range and conversion behavior.

Önerilen Ürünler Özeti

MCP3427 One-channel member of the same converter family Kullanıldığı Yer: Battery Cell Monitoring, Process and Environmental Monitoring MCP3428 Four-channel member of the same converter family Kullanıldığı Yer: Battery Cell Monitoring, Process and Environmental Monitoring MCP3426A1-E/SN Microchip Technology Kullanıldığı Yer: Industrial Pressure Sensing, Precision Current Measurement MCP3426A3-E/SN Same-family gain alternative for smaller bridge spans Kullanıldığı Yer: Industrial Pressure Sensing, Temperature and Thermocouple Acquisition, Precision Current Measurement MCP3426A4-E/SN Microchip Technology Kullanıldığı Yer: Temperature and Thermocouple Acquisition, Instrumentation and Data Acquisition MCP3426A5-E/SN Microchip Technology Kullanıldığı Yer: Instrumentation and Data Acquisition
What is the MCP3426A2-E/SN?
The MCP3426A2-E/SN is a Microchip Technology 16-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, a 2.048 V onboard reference, and an 8-pin SOIC package. According to the Microchip MCP3426 datasheet, it converts two analog channels at rates up to 15 samples per second, making it suitable for precision, low-frequency measurements rather than high-speed waveform acquisition.
What is the operating voltage of MCP3426A2-E/SN?
The MCP3426A2-E/SN operates from 2.7 V to 5.5 V. This supply range supports both 3.3 V and 5 V systems and allows the converter to share a regulated rail with common embedded controllers. According to the MCP3426 family datasheet, the digital interface and analog supply levels must be selected consistently with the target system voltage.
How many channels and bits does the MCP3426A2-E/SN have?
The MCP3426A2-E/SN has two differential input channels and up to 16 bits of resolution. The manufacturer identifies it as the two-channel member of the MCP3426, MCP3427, and MCP3428 delta-sigma converter family. Its dual-channel architecture allows two related sensor measurements to be captured without adding a second converter.
What is the conversion speed of MCP3426A2-E/SN?
The MCP3426A2-E/SN performs conversions at up to 15 samples per second. According to the MCP3426 family documentation, this speed is appropriate for slowly changing sensor signals, including temperature, pressure, current, and resistive bridge outputs. It is not intended for high-frequency waveform sampling or audio-rate acquisition.
What differential input range does MCP3426A2-E/SN support?
The MCP3426A2-E/SN supports a differential input range of ±2.048 V with its onboard 2.048 V reference. The usable span depends on the selected gain and analog front end, so the input must remain within both the converter's absolute limits and the range established by that gain configuration.
Where can I download the MCP3426A2-E/SN datasheet PDF?
The MCP3426A2-E/SN datasheet PDF is available through the manufacturer product page and the linked manufacturer-family PDF. The document covers the MCP3426, MCP3427, and MCP3428 converters and includes pin assignments, electrical characteristics, gain options, interface timing, and recommended application circuits. Use the manufacturer pin-description table when assigning PCB tracks.
Where can I find the MCP3426A2-E/SN pinout?
The MCP3426A2-E/SN pinout is defined in the Microchip MCP3426 family datasheet and uses an 8-pin SOIC arrangement. Pins 1 and 2 provide the supply and ground connections, pins 3 through 6 serve the two differential input channels, and pins 7 and 8 carry the serial clock and data functions. Verify the final board connections against the datasheet pin-description table.
MCP3426A2-E/SN vs MCP3427-E/SN - which is better for dual-channel sensing?
The MCP3426A2-E/SN is the better choice for dual-channel sensing because MCP3426 provides two differential input channels, while MCP3427 is the one-channel family member. Both belong to the same low-noise delta-sigma converter family and use the 2.048 V precision-reference approach. Choose MCP3426 when simultaneous measurements of two related sensor outputs are required.
MCP3426A2-E/SN vs MCP3428-E/SN - which fits a four-channel system?
The MCP3428-E/SN is the appropriate family member for a four-channel system because MCP3428 provides four input channels, while MCP3426A2-E/SN provides two. The MCP3426 remains preferable for compact two-channel designs that need the same 16-bit delta-sigma architecture and onboard 2.048 V reference. Confirm the required channel count before treating either part as a functional substitute.
When should I choose MCP3426A2-E/SN over another MCP3426 gain option?
Choose MCP3426A2-E/SN when the source's expected differential amplitude matches the A2 gain range and its noise contribution is acceptable for the measurement. The A2 option provides a balance between sensitivity and full-scale span for many low-level differential sensors. If the signal is substantially smaller or larger, select the MCP3426 gain variant that maximizes use of the converter's input range without clipping.
What can replace the MCP3426A2-E/SN?
The closest same-family drop-in choices are the other pin-compatible MCP3426 gain variants, including MCP3426A1-E/SN, MCP3426A3-E/SN, MCP3426A4-E/SN, MCP3426A5-E/SN, and MCP3426A6-E/SN. They retain the 8-pin SOIC architecture but change input gain and effective signal range. Treat them as controlled gain substitutions and verify full-scale range, noise, and input impedance before replacement.
Is MCP3426A2-E/SN the same as MCP3426A2T-E/SN?
The MCP3426A2-E/SN and MCP3426A2T-E/SN represent the same converter configuration in different orderable shipping formats, but the T designation indicates the alternate package presentation. They are not treated as independent engineering alternatives here because the electrical function is unchanged. Confirm reel orientation, moisture handling, and PCB assembly requirements when changing the order code.
Is the MCP3426A2-E/SN suitable for automotive applications?
The MCP3426A2-E/SN is identified as an AEC-Q100 automotive-grade converter and supports an operating temperature range of -40°C to +125°C. Automotive suitability still depends on the complete system design, including transient immunity, supply quality, EMC validation, and manufacturer ordering documentation. Use the automotive-qualified ordering option required by the end application.
Where can I buy MCP3426A2-E/SN and check current availability?
Use the Request a Quote form on this page to ask about MCP3426A2-E/SN availability, current lead time, and minimum order quantity. The form connects the exact 8-pin SOIC ordering code with the required tube presentation. Confirm stock, date codes, and authorized-channel sourcing before releasing a production purchase order.
What are the key specifications of MCP3426A2-E/SN that engineers should know?
The key MCP3426A2-E/SN specifications are 16-bit maximum resolution, two differential channels, up to 15 SPS conversion speed, a 2.048 V onboard reference, and a 2.7 V to 5.5 V supply range. The converter comes in an 8-pin SOIC package and is identified as AEC-Q100 qualified for automotive use. According to the Microchip MCP3426 family datasheet, its architecture prioritizes low noise and accuracy for low-frequency measurement.

Mühendislik referans verileri: MCP3426A2-E/SN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MCP3426A2-E/SN for low-speed, two-channel differential measurements when the expected signal range matches gain 2 and the 2.7 V to 5.5 V supply is compatible with the system. Its 16-bit resolution, 2.048 V onboard reference, and up-to-15-SPS conversion rate suit sensors such as bridges, shunts, resistive elements, and slow temperature probes. Select MCP3426A1-E/SN when the signal requires more range, or A3 through A6 when it is smaller and needs greater amplification. MCP3427 is appropriate for a single channel, while MCP3428 reduces converter count in a four-channel design. For any same-family substitution, recalculate the full-scale differential range, clipping margin, effective resolution, input impedance, and noise behavior rather than considering package match alone.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MCP3426A1-E/SN MCP3426A3-E/SN MCP3426A4-E/SN MCP3426A5-E/SN MCP3426A6-E/SN
Package 8-SOIC 8-SOIC - same 8-SOIC - same 8-SOIC - same 8-SOIC - same 8-SOIC - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Resolution Up to 16 bits Up to 16 bits Up to 16 bits Up to 16 bits Up to 16 bits Up to 16 bits
Input Channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels
Conversion Rate Up to 15 SPS Up to 15 SPS Up to 15 SPS Up to 15 SPS Up to 15 SPS Up to 15 SPS
Internal Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Gain Configuration Gain 2 Gain 1 Gain 4 Gain 8 Gain 16 Gain 32
Conversion Architecture Delta-sigma Delta-sigma Delta-sigma Delta-sigma Delta-sigma Delta-sigma

Ana Farklılayıcılar

  • Two differential inputs in an 8-pin footprint (karşılaştırma:MCP3427)
  • Higher gain than the A1 option (karşılaştırma:MCP3426A1-E/SN)
  • Balanced signal range for differential sensing (karşılaştırma:MCP3426A3-E/SN)
  • Integrated precision reference (karşılaştırma:MCP3428)

Tasarım Notları

Route the two differential input pairs as short, matched traces and connect each pair to its converter pins without sharing sensitive return paths with motors, relays, or switching-regulator returns. Place any input-series resistors and filter capacitors close to the appropriate VIN pins. Differential layout helps preserve common-mode rejection, while keeping high-current paths away from the analog ground reduces error in the converted result.

Decouple the VDD pin directly at the package with a local high-frequency ceramic capacitor and the bulk capacitance specified by the manufacturer's application guidance. Keep the 2.7 V to 5.5 V supply within its operating limits and avoid routing the converter's supply through the same impedance as analog sensor currents. A quiet reference and supply are especially important when the design seeks the full benefit of the converter's 16-bit resolution.

Do not select the converter only by package or nominal resolution. First determine the maximum differential input at normal, transient, and fault conditions; then choose the MCP3426 gain option that keeps the signal within range while using adequate ADC scale. Replacing A2 with another gain version can preserve the footprint but radically change the full-scale input span, noise contribution, and clipping margin.

Treat the analog inputs as high-impedance measurement nodes. Minimize leakage around the input pins, use low-leakage protection components, and avoid unnecessary high-value resistive networks that can degrade accuracy. Verify settling after channel switching and discard initial readings when necessary. Firmware should also include saturation detection, because an over-range input can otherwise look like a valid extreme measurement.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The MCP3426A2-E/SN is identified as AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MCP3426A2-E/SN MCP3426A2-E/SN datasheet MCP3426A2-E/SN datasheet pdf MCP3426A2-E/SN pinout MCP3426A2-E/SN equivalent MCP3426A2-E/SN replacement MCP3426A2-E/SN cross reference MCP3426A2-E/SN application circuit MCP3426A2-E/SN footprint MCP3426A2-E/SN price MCP3426A2-E/SN stock MCP3426A2 vs MCP3428 Microchip MCP3426A2-E/SN 8-SOIC MCP3426A2 pinout

İlgili Bileşenler ve Terimler

Microchip Technology MCP3426A2-E/SN MCP3426 MCP3427 MCP3428 MCP3426A1-E/SN MCP3426A3-E/SN MCP3426A4-E/SN MCP3426A5-E/SN MCP3426A6-E/SN ADC analog-to-digital converter delta-sigma ADC differential input 16-bit resolution 2.048 V reference 15 SPS conversion rate 8-SOIC SOIC family surface mount SMD I2C AEC-Q100 automotive electronics industrial sensor measurement
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle