MKE02Z16VLC2R - 20MHz 16KB Flash ARM Cortex-M0+ MCU | NXP
MPN: MKE02Z16VLC2R ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MKE02Z16VLC2R Overview
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals into one device. The ARM Cortex-M0+ core uses a 32-bit architecture and executes compact embedded firmware, while the KE02 family emphasizes low cost, low power, and high robustness. The MKE02Z16VLC2R is positioned as an entry point into NXP's Kinetis E-series portfolio and is identified as pin-compatible with Kinetis E-series devices and the S08P family.
Verified features include a 20 MHz operating frequency, 16 KB programmable Flash, 2 KB SRAM, 28 I/O, and connectivity through I2C, SPI, and UART/USART. Listed peripherals include low-voltage detection, pulse-width modulation, and a watchdog timer. Its power-management module supports Run, Wait, and Stop modes, helping conserve energy when the application does not require continuous processing.
The KE02 architecture combines a compact Cortex-M0+ core with integrated communication and control resources, reducing external component requirements in compact control boards. Flash supports in-system programming, while SRAM provides working memory for firmware execution. The available I2C, SPI, and serial interfaces allow the MCU to connect sensors, memory, converters, actuators, and human-interface devices without requiring several dedicated interface controllers.
Typical uses include industrial control modules, small sensor nodes, building and appliance controllers, compact power converters, communication equipment, and low-cost embedded products. The 32-LQFP package exposes 28 I/O and is suitable for conventional PCB assembly, prototype boards, and automated production lines that require a leaded surface-mount package.
Designers should select the MCU according to firmware size, SRAM demand, peripheral requirements, low-power behavior, and operating-temperature limits. If design rules specify automotive qualification or extended environmental ratings, those requirements must be checked separately because the provided data does not establish AEC-Q100 qualification. Validate all pin multiplexing, clock, and peripheral settings against the current manufacturer documentation before release.
This product page combines verified manufacturer and distributor information, practical selection guidance, application context, and honest handling of missing technical data. It is intended to help engineers identify whether the MKE02Z16VLC2R fits a new embedded design or an existing 32-LQFP controller platform.
Drop-in alternatives for MKE02Z16VLC2R — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MKE02Z16VLC2R (same form factor and footprint) — differing in Package, ADC, Core, Operating Temperature, Communication.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
MKE02Z16VLC2
✅ Drop-In✓ In Stock
$1.15 / Unit
View Datasheet →MKE02Z64VLC4
✅ Drop-In📋 Reference alternative (not in catalog)
MKE02Z64VLH2
✅ Drop-In📋 Reference alternative (not in catalog)
MK02FN128VFM10
✅ Drop-In✓ In Stock
$2.07 / Unit
View Datasheet →MC9S08SE8VWL
✅ Drop-In✓ In Stock
$2.34 / Unit
View Datasheet →MC908GP32CFBE
✅ Drop-In✓ In Stock
$10.75 / Unit
View Datasheet →MKE02Z16VLC2R Maximum Ratings & Electrical Characteristics
| Core Processor | ARM Cortex-M0+ |
| Core Size | 32-bit |
| Maximum Clock Frequency | 20 MHz |
| Program Memory Size | 16 KB (16K x 8) |
| Program Memory Type | Flash |
| SRAM Size | 2 KB |
| Number of I/O | 28 |
| Connectivity | I2C, SPI, UART/USART |
| Listed Peripherals | LVD, PWM, WDT |
| Power Management Modes | Run, Wait, Stop |
| Package | 32-LQFP (7x7 mm) |
| Terminal Count | 32 |
| Mounting Style | Surface Mount |
| Package Shape | Square |
| Terminal Form | Gull Wing |
| Temperature Grade | Industrial |
| Series | Kinetis KE02 |
| Family Positioning | Entry point to the Kinetis E-series portfolio |
| Compatibility | Pin-compatible with Kinetis E series and S08P family |
| Part Status | Active |
| Flash Write Voltage Range | 2.7 V to 5.5 V |
MKE02Z16VLC2R square Pin Configuration Guide
Pin configuration for MKE02Z16VLC2R (square package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for MKE02Z16VLC2R.
Refer to the datasheet for full pin configuration.
Typical Applications
MKE02Z16VLC2R is suitable for 7 applications: Compact Industrial Control Module, Embedded Sensor and Measurement Node, Low-Cost Power Converter Controller, Building and Appliance Control Board, Communication and Protocol Bridge, Battery-Powered Embedded Product, IoT Device Front End.
Compact Industrial Control Module
The MKE02Z16VLC2R fits compact control modules that coordinate sensors, actuators, and digital I/O at up to 20 MHz. Its 16 KB Flash and 2 KB SRAM are appropriate for compact supervisory logic, while UART/USART, I2C, and SPI provide links to remote sensors, converters, and service interfaces. PWM and watchdog support useful for motor or timing-related functions, and low-voltage detection can supervise the supply. The 32-LQFP package is practical for conventional PCB assembly. Firmware should stay within memory limits and be validated against the industrial temperature-grade requirements before deployment.
Recommended
Embedded Sensor and Measurement Node
The MKE02Z16VLC2R is suitable for small sensor nodes that need local sampling, conditioning, and communication without a high-cost processor. I2C can connect digital sensors, SPI can support external memory or converters, and UART/USART can provide a simple host or service link. The 20 MHz Cortex-M0+ core handles control tasks, while 2 KB SRAM is suitable for modest working buffers. Because memory is limited, applications should avoid large local buffering and move complex processing to a host. Confirm the exact peripheral pin multiplexing and sensor timing requirements from the manufacturer datasheet.
Recommended
Low-Cost Power Converter Controller
The MKE02Z16VLC2R can serve as the supervisory controller in a compact power-conversion module where PWM, low-voltage detection, and serial communication are more important than deep firmware storage. The 20 MHz core provides control-loop execution, while the listed PWM peripheral supports timing-based drive functions. UART/USART enables configuration, monitoring, or fault reporting, and the watchdog helps recover from unexpected firmware or system lockups. The 32-LQFP footprint supports routed PCB layouts and automated assembly. Actual loop performance, switching timing, electrical limits, and isolation requirements must be validated in the final power-stage design.
Recommended
Building and Appliance Control Board
The MKE02Z16VLC2R is a reasonable fit for compact appliance, HVAC, or building-control boards that need deterministic embedded control and several standard serial interfaces. PWM can support motor, valve, or indicator functions; low-voltage detection can assist supply monitoring; and I2C or SPI can connect sensors and display or memory devices. The 16 KB Flash and 2 KB SRAM encourage a lean firmware architecture with local control loops and remote configuration. For production designs, validate the industrial temperature-grade designation, brownout behavior, communication timing, and any regulatory requirements for the finished appliance or building equipment.
Recommended
Communication and Protocol Bridge
The MKE02Z16VLC2R can implement small protocol bridges or service adapters that translate between UART/USART and I2C or SPI-connected devices. The 20 MHz Cortex-M0+ core is sufficient for lightweight framing, command parsing, status reporting, and fault handling, while the 16 KB Flash and 2 KB SRAM limit the complexity of local buffering. This makes it useful for configuration adapters, diagnostic interfaces, and legacy-to-modern peripheral bridges. Verify baud-rate, electrical-level, isolation, timing, and connector requirements before deployment; the MCU's integrated interfaces do not replace external level-shifting or protection circuits.
Recommended
Battery-Powered Embedded Product
The MKE02Z16VLC2R can be evaluated for battery-powered accessories and portable equipment where Run, Wait, and Stop power modes support duty-cycled operation. Stop and Wait modes can reduce activity during idle intervals, while the watchdog provides a recovery mechanism for long-running embedded products. The MCU's small memory footprint favors compact firmware and limited local storage, and its communication interfaces allow configuration or status exchange when active. Battery life must be estimated from actual current consumption and wake-up timing, which are not supplied in the verified data, and any charging or protection function requires external circuitry.
Recommended
IoT Device Front End
The MKE02Z16VLC2R is appropriate for a small IoT front end that gathers local sensor data, performs basic control, and forwards information through a serial or sensor-bus interface. I2C and SPI help connect short-range radio, environmental, or storage modules, while UART/USART supports diagnostics and boot programming. Its 20 MHz core and 16 KB Flash are well matched to lightweight edge functions rather than gateway-level processing. Keep radio protocol overhead and buffering within the verified memory budget, and use the power-management modes to control idle consumption. Final compliance and security requirements depend on the complete product rather than the MCU alone.
Recommended
Recommended Products Summary
Engineering reference data for MKE02Z16VLC2R — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MKE02Z16VLC2 | MKE02Z64VLC4 | MKE02Z64VLH2 | MK02FN128VFM10 | MC9S08SE8VWL |
|---|---|---|---|---|---|---|
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) - same | 32-LQFP (7x7 mm) - same family footprint | 32-LQFP (7x7 mm) - same family footprint | 32-LQFN - package family differs | 32-LQFP - verify exact pin compatibility |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | Freescale Semiconductor |
Key Differentiators
- Compact memory footprint with integrated communication interfaces (vs MC9S08SE8VWL)
- Low-cost 20 MHz KE02 positioning (vs MKE02Z64VLC4)
- Power-management capability for embedded control (vs MC908GP32CFBE)
- Pin-compatible ecosystem positioning (vs MKE02Z16VLC2)
Design Notes
Design the supply and decoupling around the verified 2.7 V to 5.5 V Flash write voltage range, while checking the complete electrical limits for the selected operating mode. Place bulk and local bypass capacitors close to the supply pins and return ground through a low-impedance path. Validate brownout, low-voltage detection, watchdog behavior, and power sequencing in the final firmware because the provided data does not specify current consumption or startup timing.
Use the 32-LQFP, 7x7 mm footprint with adequate escape routing for I2C, SPI, UART/USART, PWM, and debug or programming signals. Confirm the exact pinout and alternate-function assignments from the current NXP datasheet before routing; the verified sources list 28 I/O but do not provide the complete pin table. Keep sensitive analog or communication routes away from noisy switching nodes and provide clean grounding for communications and control loops.
Do not treat the KE02 family-level pin-compatibility statement as a guaranteed direct replacement for MKE02Z16VLC2R. Check exact suffix, memory size, SRAM, voltage, temperature grade, peripheral set, and software support. Firmware must also remain within 16 KB Flash and 2 KB SRAM, including bootloader, libraries, interrupt handlers, and application code. A replacement is acceptable only after schematic, timing, and boot-flow review.
Compliance Information
The provided web results identify the part as active and industrial temperature grade, but they do not provide verified RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declarations. AEC-Q100 status is therefore treated as not applicable rather than assumed compliant.