Texas Instruments

MSP430F2111TPW - 16MHz, 2KB Flash MCU | Texas Instruments

MPN: MSP430F2111TPW ✓ Active
20-pin TSSOP Package 16 MHz Speed 2 KB Memory
MOQ: 1 |

MSP430F2111TPW Overview

Texas Instruments MSP430F2111TPW is a 16-bit, 16 MHz MSP430 mixed-signal microcontroller with 2 KB Flash memory, 128 bytes SRAM, 16 I/O pins, and a 20-pin TSSOP package. It combines an ultra-low-power RISC core with a built-in 16-bit timer and versatile analog comparator for compact embedded-control designs.

A mixed-signal microcontroller is a semiconductor that integrates digital processing with analog measurement or control functions. The MSP430F2111 belongs to the MSP430 family of 16-bit RISC microcontrollers, combining a low-power CPU, embedded Flash, SRAM, timers, comparators, and general-purpose I/O in one package. This integration supports battery-powered sensing, acquisition, monitoring, and control products where component count, board area, and standby energy are important.

The device operates at up to 16 MHz and provides 2 KB of Flash alongside 128 bytes of SRAM. Its 16 I/O pins can be assigned to digital inputs, outputs, or mixed functions. An integrated 16-bit timer supports periodic timing and event-counting tasks, while the analog comparator allows threshold detection against an external reference without requiring a separate comparator IC. These resources allow a small firmware image to handle sensing, control logic, and communication tasks.

The MSP430 architecture uses a 16-bit RISC instruction set and provides a compact register-oriented design for low-power mixed-signal products. Its timer and comparator peripherals can operate with the CPU idle, helping minimize active processing time in duty-cycled systems. The 20-TSSOP package also supports straightforward assembly onto conventional surface-mount boards, while the exposed lead geometry provides compact routing options around the device.

Typical applications include battery-operated sensor nodes, compact analog monitoring systems, industrial condition-monitoring devices, portable measurement instruments, and low-power control boards. The comparator is particularly useful for detecting battery thresholds, external sensor crossings, or simple overvoltage events. The timer can organize periodic sampling and communication schedules while allowing the processor to remain in a low-power state between events.

Designers should verify the power-supply limits, clock configuration, programming interface, and detailed pin assignments in the manufacturer datasheet before layout release. Use the complete pin-description table when assigning PCB tracks, and account for decoupling-capacitor placement around the supply and ground pins. Firmware should also include safe reset, clock-startup, and low-power state transitions for reliable field operation.

This product page combines manufacturer specifications, functional guidance, application analysis, design notes, and candidate drop-in references to support faster component evaluation. It helps engineers assess whether the MSP430F2111TPW provides the required CPU speed, memory, mixed-signal resources, package size, and low-power architecture for a compact embedded design.

Drop-in alternatives for MSP430F2111TPW — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MSP430F2111TPW (same form factor and footprint) — differing in CPU Architecture, Flash Memory, Package, SRAM, Timer.

Texas Instruments
CPU Architecture: 16-bit RISC
Flash Memory: 1 KB
Package: 20-pin TSSOP (PW)
Compare with MSP430F2111TPW →

MSP430F2111IPWR

✅ Drop-In
📦 20-TSSOP
Same 16 MHz core, 2 KB Flash, 128-byte SRAM, timer, comparator, and 20-TSSOP package; ordering temperature-grade suffix differs

📋 Reference alternative (not in catalog)

MSP430F2111TPW Maximum Ratings & Electrical Characteristics

Product Type 16-bit mixed-signal microcontroller
CPU Architecture MSP430 RISC
Maximum Clock Frequency 16 MHz
Flash Memory 2 KB
SRAM 128 bytes
General-Purpose I/O Pins 16 pins
Timer 1 integrated 16-bit timer
Analog Comparator 1 integrated analog comparator
Package 20-pin TSSOP
Mounting Type Surface mount
Power Class Ultra-low-power mixed-signal MCU

MSP430F2111TPW 20-pin tssop Pin Configuration Guide

Pin configuration for MSP430F2111TPW (20-pin tssop package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

20-pin tssop package pinout diagram for MSP430F2111TPW

No detailed pinout data available for MSP430F2111TPW.

Refer to the datasheet for full pin configuration.

Typical Applications

MSP430F2111TPW is suitable for 6 applications: Battery-Powered Sensor Nodes, Battery Voltage Monitoring, Industrial Condition Monitoring, Portable Measurement Instruments, Low-Power Control Boards, Analog Threshold Detection Systems.

🧩

Battery-Powered Sensor Nodes

MSP430F2111TPW fits battery-powered sensor nodes that require periodic measurement and threshold-based event detection. Its 16 MHz MSP430 CPU can process sensor data, while the integrated analog comparator can monitor a battery or analog signal against a reference. The 2 KB Flash and 128 bytes of SRAM provide a compact memory footprint for lightweight firmware, and the timer helps schedule periodic sampling while the processor remains idle between events. Power calculations should include active time, comparator use, and the chosen low-power state rather than assuming continuous full-speed operation.

⚡

Battery Voltage Monitoring

The MSP430F2111TPW can supervise a battery or portable power system without adding a dedicated comparator IC. Its integrated analog comparator provides threshold detection, allowing firmware to react when a divided battery voltage crosses a defined limit. The 16 MHz CPU provides enough headroom for debouncing, state tracking, and host communication, while the 16 I/O pins can support indicator outputs or a serial interface. Designers should verify the comparator input range and reference behavior in the manufacturer datasheet, then add input filtering appropriate to the battery chemistry and fault conditions.

🏭

Industrial Condition Monitoring

MSP430F2111TPW is suitable for compact industrial condition-monitoring modules that sample a sensor, evaluate a threshold, and report an event. The analog comparator can perform fast limit detection on a conditioned analog signal, while the built-in 16-bit timer supports periodic acquisition and debounce timing. Its compact 20-TSSOP package helps reduce board area in distributed sensing equipment. Industrial deployments should add appropriate input protection, verify operating-temperature requirements, and define failure behavior so a comparator event produces a safe output rather than relying only on software timing.

🔧

Portable Measurement Instruments

MSP430F2111TPW can serve as the control core of a small handheld measurement product where a 16-bit CPU, timer, and comparator provide a practical peripheral combination. The timer supports repeatable measurement intervals, and the comparator can identify a threshold crossing or implement a simple event detector. Its 2 KB Flash requires disciplined firmware sizing, while the 128-byte SRAM should be checked for stack and buffering needs. For production designs, confirm the programming interface, clock setup, and supply limits in the MSP430x21x1 datasheet before finalizing the PCB and code.

📱

Low-Power Control Boards

MSP430F2111TPW works well in a low-power embedded controller where the design uses a timer for periodic control actions and I/O pins for actuators or logic. The 16 MHz MSP430 core provides straightforward control processing without the memory overhead of a larger MCU, and the integrated comparator can support autonomous threshold decisions. The 20-TSSOP package enables compact surface-mount assembly, but pin multiplexing and alternate-function capabilities must be checked against the application. Firmware should initialize unused pins, disable unused peripherals, and enter a defined low-power state between scheduled tasks.

📡

Analog Threshold Detection Systems

MSP430F2111TPW is appropriate for analog threshold-detection systems where the analog comparator provides a fast decision input while firmware performs filtering, logging, or communication. This arrangement can avoid continuous conversion and polling when only a crossing point matters. The 16 MHz processor can manage event qualification and a 16-bit timer can establish measurement or debounce windows. Confirm comparator response, voltage limits, and input topology in the manufacturer datasheet because the target MPN does not list an ADC specification, and ensure the external signal remains within the device's supported electrical limits.

What is the operating frequency of MSP430F2111TPW?
The MSP430F2111TPW operates at up to 16 MHz. Texas Instruments describes the device as an MSP430 mixed-signal microcontroller with a 16-bit CPU architecture, combining a 16 MHz clock with 2 KB of Flash and 128 bytes of SRAM. This processing capacity is suitable for compact control, timing, and analog-threshold applications that do not require a larger memory footprint.
How much Flash and SRAM does MSP430F2111TPW have?
MSP430F2111TPW provides 2 KB of Flash memory and 128 bytes of SRAM. According to the Texas Instruments product page, the MCU combines its 16 MHz MSP430 core with this 2 KB Flash and 128-byte RAM configuration. Designers should size firmware and stack requirements against these limits before selecting the device for a new application.
What peripherals are integrated into MSP430F2111TPW?
MSP430F2111TPW integrates a 16-bit timer, a versatile analog comparator, and 16 I/O pins. The manufacturer identifies the part as an ultra-low-power mixed-signal MCU, so the comparator can support threshold detection while the timer handles periodic events. These integrated resources reduce the need for external sensing and timing components in compact embedded systems.
Where can I download the MSP430F2111TPW datasheet PDF?
The official MSP430x21x1 Mixed Signal Microcontroller datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/MSP430F2111. The document contains the authoritative electrical characteristics, pin descriptions, package information, and operating details. Use the ordering information to confirm the TPW package and ordering options before releasing the PCB design.
Where can I find the MSP430F2111TPW pinout?
The MSP430F2111TPW pinout is documented in the pin-configuration section of the Texas Instruments MSP430x21x1 Mixed Signal Microcontroller datasheet at https://www.ti.com/lit/gpn/MSP430F2111. The device uses a 20-pin TSSOP package with 16 I/O pins. Assign PCB nets from the datasheet pin table rather than inferring pin functions from the device family name.
What can replace MSP430F2111TPW?
MSP430F2111IPWR is the closest identified same-package replacement candidate for MSP430F2111TPW. Both are listed as 16-bit, 16 MHz MSP430F2xx devices with 2 KB Flash, 128 bytes of SRAM, a timer, a comparator, and a 20-TSSOP package. Confirm temperature grade, programming details, and lifecycle status against the manufacturer datasheet before production substitution.
Is MSP430F2111IPWR pin compatible with MSP430F2111TPW?
MSP430F2111IPWR is a pin-compatible candidate for MSP430F2111TPW because both are identified as MSP430F2111-family devices in 20-pin TSSOP packages with the same 16 MHz core and 2 KB Flash configuration. Before exchanging the parts, verify the ordering temperature range and confirm that the complete electrical and pin specification matches the target PCB requirements.
MSP430F2111TPW vs MSP430F1121A - which MCU is better?
MSP430F2111TPW is preferable when a design needs its 16 MHz clock, 2 KB Flash, 128-byte SRAM, timer, comparator, and 16 I/O pins. The MSP430F1121A is identified as an 8 MHz MCU with 4 KB Flash and 256 bytes of SRAM, so its slower clock does not necessarily prevent use but requires compatibility verification beyond memory capacity. It is not treated here as a drop-in replacement.
When should I choose MSP430F2111TPW instead of MSP430FR2111?
Choose MSP430F2111TPW when the application needs 2 KB of Flash rather than 4 KB of FRAM. MSP430FR2111 is identified as a 16 MHz device with 4 KB FRAM, 1 KB SRAM, a comparator, a 10-bit ADC, UART, SPI, and timer. The FRAM option can suit designs that benefit from nonvolatile writes, while MSP430F2111TPW fits smaller Flash-based designs with its distinct peripheral set.
Is MSP430F2111TPW suitable for battery-powered sensor systems?
MSP430F2111TPW is suitable for battery-powered sensor systems because it is an ultra-low-power mixed-signal MCU with an integrated comparator and timer. The comparator can perform threshold detection, while the timer supports periodic sampling, allowing the CPU to remain inactive between events. Final battery-life calculations require the application's active current, standby current, and operating-duty-cycle values.
Where can I buy MSP430F2111TPW online?
Request a quote for MSP430F2111TPW through the Request a Quote form on this page to obtain current commercial terms, availability, and lead-time information. The part is a 20-TSSOP Texas Instruments microcontroller with 2 KB Flash, 128 bytes of SRAM, a 16 MHz CPU, a timer, and a comparator. A written quotation is preferable when the required temperature grade or packaging must be confirmed.
What is the current price of MSP430F2111TPW?
The current commercial price for MSP430F2111TPW should be obtained through the Request a Quote form on this page. The quote can be matched to the exact MSP430F2111TPW ordering code, 20-TSSOP package, required quantity, and delivery schedule. This avoids confusion with other MSP430F2111 package or temperature-grade variants.
Is MSP430F2111TPW in stock and what is its lead time?
Current MSP430F2111TPW stock and lead time should be confirmed through the Request a Quote form on this page. The manufacturer product page identifies the MSP430F2111 as a 16 MHz mixed-signal MCU with 2 KB Flash and 128 bytes of SRAM, while the ordering code determines the exact package and qualification configuration. Request the quantity and production schedule with the inquiry.
What are the key specifications of MSP430F2111TPW that engineers should know?
The key MSP430F2111TPW specifications are a 16-bit MSP430 CPU operating at 16 MHz, 2 KB of Flash, 128 bytes of SRAM, 16 I/O pins, an integrated 16-bit timer, and an analog comparator in a 20-TSSOP package. Texas Instruments classifies the device as an ultra-low-power mixed-signal MCU. These parameters define its suitability for compact sensing, timing, and threshold-control designs.
How does MSP430F2111TPW support low-power embedded control?
MSP430F2111TPW supports low-power control through its ultra-low-power MSP430 architecture, integrated timer, and analog comparator. The timer can organize periodic measurements, while the comparator can perform event or threshold detection without continuous CPU polling. Power performance should be evaluated using the selected clock state, active duration, standby duration, and peripheral configuration in the finished firmware.

Engineering reference data for MSP430F2111TPW — comparison, design guidance, and compliance information.

Selection Guide

Choose MSP430F2111TPW for compact designs that need a 16-bit MSP430 core at 16 MHz, 2 KB of Flash, 128 bytes of SRAM, 16 I/O pins, a timer, and an analog comparator in a 20-TSSOP package. MSP430F2111IPWR is the closest identified exchange candidate because it uses the same package and core, memory, timer, and comparator configuration; verify the ordering temperature range before substitution. Do not choose MSP430F1121A solely for its 4 KB Flash because its 8 MHz clock and distinct family configuration require a broader compatibility review. Consider MSP430FR2111 when 4 KB of FRAM, 1 KB of SRAM, a 10-bit ADC, and UART/SPI resources are more valuable than the target's 2 KB Flash architecture. For production sourcing, submit the exact MSP430F2111TPW code and required quantity through the Request a Quote form so package, qualification, and delivery conditions can be confirmed together.

Comparison with Alternatives

Parameter This Product MSP430F2111IPWR
Brand Texas Instruments Texas Instruments
Package 20-TSSOP 20-TSSOP
CPU Architecture 16-bit MSP430 RISC 16-bit MSP430 RISC
Maximum Clock Frequency 16 MHz 16 MHz
Flash Memory 2 KB 2 KB
SRAM 128 bytes 128 bytes
General-Purpose I/O 16 pins 16 pins
Integrated Timer 16-bit timer 16-bit timer
Analog Comparator Integrated comparator Integrated comparator

Key Differentiators

  • Identified same-package exchange candidate (vs MSP430F2111IPWR)
  • Compact mixed-signal integration (vs MSP430F2111IPWR)
  • Sixteen general-purpose I/O pins (vs MSP430F2111IPWR)

Design Notes

Assign every board net from the MSP430x21x1 pin-configuration table and preserve the 20-TSSOP land pattern for MSP430F2111TPW. Place the required supply-decoupling capacitor close to the device's power and ground connections, and route sensitive comparator inputs away from switching nodes and high-current return paths. Confirm exposed-pad requirements for the selected package orderable before fabrication.

Build the power budget around actual firmware states rather than a single operating-current figure. The timer can wake the MCU for scheduled tasks, and the comparator can generate events that do not require continuous polling. Calculate average consumption from active time, standby time, timer frequency, comparator use, and peripheral leakage, then verify the result against the minimum battery or supply voltage in the manufacturer datasheet.

Do not assume that an MCU in the same family is interchangeable without checking the complete ordering code and pin table. MSP430F2111IPWR is the identified 20-TSSOP candidate, but the temperature-grade suffix can change the intended operating conditions. Also size firmware against the 2 KB Flash limit and review stack usage within the 128-byte SRAM before committing the production design.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance status was not specified in the product information for MSP430F2111TPW. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-mineral declarations for the exact ordering code.

Data verified on: 2026-11-20 — data verified and curated by XAIPART's component engineering team

Related Searches

MSP430F2111TPW datasheet MSP430F2111TPW pinout MSP430F2111TPW datasheet pdf Texas Instruments MSP430F2111TPW MSP430F2111TPW equivalent MSP430F2111TPW replacement MSP430F2111TPW cross reference MSP430F2111TPW footprint MSP430F2111TPW price MSP430F2111TPW stock MSP430F2111 16MHz 2KB Flash MSP430F2111TPW vs MSP430F2111IPWR

Related Components & Terms

Texas Instruments MSP430F2111TPW MSP430F2111IPWR MSP430F2111 MSP430F1121A MSP430FR2111 MSP430 16-bit RISC microcontroller mixed-signal microcontroller embedded microcontroller semiconductor 16 MHz CPU 2 KB Flash 128-byte SRAM 16-bit timer analog comparator 16 I/O pins 20-TSSOP TSSOP package family surface mount ultra-low-power MCU battery-powered sensor node industrial condition monitoring threshold detection low-power embedded control
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details