Texas Instruments

MSP430F2418TPN - 16MHz 16-Bit MCU with 116KB Flash | Texas Instruments

MPN: MSP430F2418TPN ✓ Active
80-pin LQFP (PN) Package 16 MHz Speed 116KB Memory
MOQ: 1 |

MSP430F2418TPN Overview

Texas Instruments MSP430F2418TPN is a 16 MHz, 16-bit mixed-signal microcontroller with 116KB of flash memory, 8KB of SRAM, and an 80-pin LQFP (PN) package. It integrates a 12-bit analog-to-digital converter, comparator, I2C, SPI, UART, and a hardware multiplier for embedded control and signal-processing applications.

A mixed-signal microcontroller combines a digital microprocessor core with analog and communication peripherals on one integrated circuit. The MSP430 family belongs to the embedded microcontroller hierarchy and targets applications where compact size, low power, mixed-signal measurement, and flexible serial connectivity are important. Its 16-bit architecture and integration reduce the need for separate analog, communication, and processing components.

The MSP430F2418 combines 116KB flash with 8KB SRAM, giving embedded firmware access to substantially more program space than typical low-end general-purpose microcontrollers. Its 12-bit ADC supports analog measurements, while the on-chip comparator supports thresholding and signal-monitoring functions. I2C, SPI, and UART peripherals allow the device to communicate with sensors, displays, data converters, and other embedded equipment.

The MSP430F2418TPN is the 80-pin LQFP (PN) orderable configuration of the MSP430F2418 device family. Its 16 MHz operating frequency provides processing headroom for acquisition, control, communications, and multiplication-intensive routines. The hardware multiplier accelerates multiplication operations, while the integrated analog peripherals allow control firmware to operate directly on real-world sensor signals.

Typical uses include industrial sensor nodes, building-control equipment, smart meters, instrumentation, low-power data loggers, communications modules, and compact embedded controllers. The I2C and UART interfaces suit low-bandwidth sensors and service interfaces, while SPI supports higher-speed peripherals such as flash memory, displays, and data converters. The ADC and comparator are useful for analog monitoring without external conversion circuitry.

PCB design should preserve clean grounding and isolate analog, digital, and power-return paths. Place input and bypass capacitors close to their associated pins, route sensitive analog signals away from switching nodes, and verify every board-level net against the manufacturer's pin-description table before fabrication. The 80-pin LQFP footprint also requires careful fanout and adequate solder-joint inspection during assembly.

This page consolidates the verified device identity, package and interface details, replacement constraints, application guidance, and practical PCB considerations into an engineering-focused resource for evaluating the MSP430F2418TPN.

Drop-in alternatives for MSP430F2418TPN — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MSP430F2418TPN (same form factor and footprint) — differing in ADC Resolution, CPU Architecture, Flash Memory, Package, SRAM.

Texas Instruments
ADC Resolution: 12 bits
CPU Architecture: MSP430 CPU16 RISC
Flash Memory: 92 KB
Compare with MSP430F2418TPN →

MSP430F2418IPN

✅ Drop-In ⚠️ Specs Unverified
📦 LQFP-80 (PN)
Same MSP430F2418 device family and 80-pin LQFP footprint; ordering-temperature suffix differs, so confirm the required temperature grade

📋 Reference alternative (not in catalog)

MSP430F2417TPN

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 LQFP-80 (PN)
16-bit mixed-signal microcontroller · MSP430 CPU16 RISC · 16 MHz · 92 KB · 92K x 8 bits plus 256 bytes information Flash · 8 KB · 12 bits · 12-bit successive-approximation ADC

Contact for price

View Datasheet →

MSP430F2416TPN

✅ Drop-In ⚠️ Specs Unverified
📦 LQFP-80 (PN)
Same MSP430F2xx family and 80-pin LQFP footprint; flash and memory capacity are lower than the MSP430F2418TPN, requiring a firmware fit check

📋 Reference alternative (not in catalog)

MSP430F2418TPN Maximum Ratings & Electrical Characteristics

Product Type 16-bit mixed-signal microcontroller
Maximum Clock Frequency 16 MHz
Flash Memory 116KB
SRAM 8KB
ADC Resolution 12-bit
Comparator Integrated
Serial Interfaces I2C, SPI, and UART
Hardware Multiplier Integrated
CPU Architecture MSP430 16-bit RISC
Package 80-pin LQFP (PN)
Package Body Size 12 mm x 12 mm
Mounting Type Surface mount
Temperature Grade Industrial
Program Memory Organization 116K x 8 plus 256B
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification not_applicable

MSP430F2418TPN 12 mm x 12 mm Pin Configuration Guide

Pin configuration for MSP430F2418TPN (12 mm x 12 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

12 mm x 12 mm package pinout diagram for MSP430F2418TPN

No detailed pinout data available for MSP430F2418TPN.

Refer to the datasheet for full pin configuration.

Typical Applications

MSP430F2418TPN is suitable for 6 applications: Industrial Sensor Node, Smart Meter and Energy Monitor, Building Control and HVAC, Low-Power Data Logger, Instrumentation and Test Equipment, Communications Equipment.

🏭

Industrial Sensor Node

MSP430F2418TPN fits an industrial sensor node that must measure analog inputs and communicate through a wired serial link. Its 12-bit ADC and integrated comparator reduce the need for external signal-conditioning hardware, while I2C and UART support common sensors, configuration chips, and service interfaces. The 16 MHz processor provides capacity for filtering, calibration, diagnostics, and protocol handling, and 8KB SRAM supports short-term acquisition and processing buffers. The 116KB flash partition also leaves room for application firmware, field-update routines, and configuration data. For an industrial deployment, confirm the operating-temperature grade and isolate analog returns from digital switching paths.

🔧

Smart Meter and Energy Monitor

The MSP430F2418TPN supports smart-meter and energy-monitoring designs that combine real-time measurement with low-power control. Its 12-bit ADC can monitor current, voltage, or sensor outputs, while the comparator provides fast threshold detection. I2C is appropriate for energy-metering ICs and temperature sensors, UART provides a communications path for configuration or local reporting, and SPI can support external nonvolatile storage. The 16 MHz clock and hardware multiplier support signal calculations, while 116KB flash accommodates metering logic and data-format routines. System partitioning should preserve measurement accuracy, provide local filtering, and avoid routing high-current switching returns through analog inputs.

🏭

Building Control and HVAC

MSP430F2418TPN is suitable for building-control modules that coordinate temperature, occupancy, valve, and actuator signals. The integrated ADC acquires sensor inputs, the comparator handles simple set-point or fault thresholds, and I2C connects environmental sensors and bus devices. UART or SPI can extend the controller to displays, memory, or remote communications. Its 116KB flash and 8KB SRAM allow coordinated control logic without a separate processor, while the 80-pin LQFP package provides ample I/O for multiple external sensors and actuator drivers. In HVAC equipment, keep triac or relay drive paths physically separated from sensitive measurement inputs and validate operation across the intended temperature range.

🧩

Low-Power Data Logger

MSP430F2418TPN fits a low-power data logger that periodically samples sensors and stores or transmits measurements. The 12-bit ADC handles analog channels, 8KB SRAM provides a working buffer, and 116KB flash can hold firmware, event data, and calibration parameters. I2C supports low-power environmental sensors, SPI supports higher-speed external flash, and UART offers a simple field-service interface. The 16 MHz CPU permits scaling, filtering, and unit conversion between infrequent acquisition periods. Duty-cycle the peripheral set and processor around each measurement event, and use the manufacturer low-power-mode characteristics to establish the expected average current and wake-up latency.

🖥️

Instrumentation and Test Equipment

The MSP430F2418TPN can serve as the control processor in compact instrumentation where measurement, calibration, and host communications must coexist. Its 12-bit ADC supports front-end conversion, the comparator supports threshold and trigger functions, and the hardware multiplier assists arithmetic in calibration and signal processing. I2C connects low-bandwidth sensors, SPI supports displays and data converters, and UART supports a simple control terminal. The 16 MHz clock and 116KB flash are suitable for embedded menus, test sequences, and correction algorithms. Use controlled analog grounding, short reference paths, and separate digital return routing to prevent measurement errors.

🌐

Communications Equipment

MSP430F2418TPN can act as the supervisory controller in a compact communications module. UART supports serial links and console access, SPI connects to radio or network-interface circuits, and I2C handles configuration peripherals. The 116KB flash accommodates protocol stacks and configuration data, while 8KB SRAM supports packet handling and state management. The hardware multiplier can accelerate CRC and data-processing routines, and the 16 MHz CPU provides useful service capacity without requiring a higher-power processor. The 80-pin package also allows external transceivers, indicators, and status controls to be connected. Validate protocol timing, interrupt latency, and pin multiplexing against the firmware configuration before production release.

Where can I download the MSP430F2418TPN datasheet PDF?
The MSP430F2418TPN datasheet and product information are available from the Texas Instruments MSP430F2418 product page at https://www.ti.com/product/MSP430F2418. The orderable-part page identifies MSP430F2418TPN as the 80-pin LQFP (PN) configuration and lists its 16 MHz clock, 116KB flash, 8KB SRAM, 12-bit ADC, comparator, I2C, SPI, UART, and hardware multiplier. Use the manufacturer document links for the authoritative electrical characteristics, pin descriptions, and package drawings.
What are the key specifications of MSP430F2418TPN?
The MSP430F2418TPN is a 16 MHz, 16-bit mixed-signal MCU with 116KB flash memory, 8KB SRAM, and an 80-pin LQFP (PN) package. According to the Texas Instruments MSP430F2418 product page, it includes a 12-bit ADC, an integrated comparator, I2C, SPI, UART, and a hardware multiplier. These specifications make it suitable for embedded measurement, acquisition, communication, and control systems where several peripheral functions need to share one microcontroller.
Where can I find the MSP430F2418TPN pinout?
The MSP430F2418TPN pinout is published with the Texas Instruments MSP430F2418 device documentation at https://www.ti.com/product/MSP430F2418. The exact orderable part uses an 80-pin LQFP (PN) package with a 12 mm by 12 mm body. Use the pin-description table and package drawing in the manufacturer datasheet when assigning port functions, power pins, analog inputs, and debug or programming signals on the PCB.
Can MSP430F2418TPN be used for sensor and industrial control systems?
Yes, the MSP430F2418TPN fits industrial sensor and control systems because it combines a 12-bit ADC, comparator, 8KB SRAM, and I2C, SPI, and UART interfaces in one device. The 16 MHz MSP430 CPU can supervise several acquisition and communication tasks, while 116KB flash provides room for firmware, calibration data, and protocol handling. The 80-pin LQFP package also exposes substantially more interface pins than smaller microcontroller packages.
What can replace the MSP430F2418TPN without changing the PCB?
The closest drop-in choices are the same-family MSP430F2416TPN, MSP430F2417TPN, and MSP430F2418IPN devices in the same 80-pin LQFP format, subject to firmware and memory checks. They are not guaranteed equivalents for every design: flash capacity and device-specific functions must be compared, and the original application must still require the MSP430 instruction set and peripheral arrangement. A PCB-compatible replacement does not remove the need to review startup code, interrupts, pin multiplexing, and device-specific registers.
What is the difference between MSP430F2418TPN and MSP430F2418IPN?
MSP430F2418TPN and MSP430F2418IPN belong to the same MSP430F2418 device family and use the same 80-pin LQFP (PN) footprint. Their primary documented distinction is the ordering-temperature suffix, so the electrical and software compatibility must be checked against the manufacturer ordering table for the required temperature grade. Both retain the family-level 16 MHz clock, 116KB flash, 8KB SRAM, 12-bit ADC, comparator, and I2C, SPI, and UART architecture.
MSP430F2418TPN vs MSP430F2417TPN: which should be selected?
Select MSP430F2418TPN when the application needs the full 116KB program memory and the MSP430F2418 feature set. MSP430F2417TPN is a lower-memory member of the same mixed-signal family, so it may fit a code-size-conscious design only after firmware size and all peripheral requirements have been checked. For an existing MSP430F2418TPN PCB, the F2417 device should be treated as a family-level replacement candidate rather than an automatic equivalent because reduced memory can alter firmware and application behavior.
When should I choose MSP430F2418TPN over MSP430F2416TPN?
Choose MSP430F2418TPN when code size, available SRAM, or the complete MSP430F2418 peripheral configuration matters; it provides 116KB flash and 8KB SRAM at up to 16 MHz. MSP430F2416TPN can be considered when the application comfortably fits its smaller memory configuration and the required mixed-signal functions match. Because flash capacity is a firmware constraint rather than a cosmetic difference, review the final linked image size, boot code, calibration table, and update margin before substitution.
Is MSP430F2418TPN suitable for battery-powered IoT equipment?
MSP430F2418TPN is suitable for battery-powered embedded equipment when its processor and peripheral activity can be duty-cycled effectively. Its 16 MHz CPU, 8KB SRAM, and 116KB flash support compact embedded logic, while I2C and UART suit low-power sensors and the 12-bit ADC supports direct analog measurement. The product page does not state a specific battery-current figure, so validate sleep-mode current, wake-up time, and analog leakage against the manufacturer electrical characteristics for the final operating voltage.
How much power does the MSP430F2418TPN consume?
Power consumption depends on supply voltage, clock activity, enabled peripherals, I/O activity, and the selected low-power mode, so one fixed consumption value does not apply to every MSP430F2418TPN design. The manufacturer product page identifies a 16 MHz mixed-signal MCU but does not provide a single operating-current figure for this orderable part. Review the active, sleep, and shutdown current tables in the MSP430F2418 datasheet, then calculate average current from the real duty cycle of the acquisition, communication, and idle intervals.
What peripheral interfaces does the MSP430F2418TPN provide?
The MSP430F2418TPN provides I2C, SPI, UART, a 12-bit ADC, an integrated comparator, and a hardware multiplier. According to the Texas Instruments product page, these peripherals are integrated into the 16-bit MCU with 116KB flash and 8KB SRAM. I2C is suitable for common low-speed sensors, SPI for faster external devices, and UART for service or point-to-point communication, while the ADC and comparator support direct analog conditioning and thresholding.
What is the lifecycle status of MSP430F2418TPN?
MSP430F2418TPN is currently treated as active for product-page purposes. Texas Instruments continues to list the MSP430F2418 family and the MSP430F2418TPN orderable configuration, including its 80-pin LQFP package. Before starting a new high-volume design, confirm the latest orderable status, lifecycle information, and availability directly through the manufacturer product page or the Request a Quote form on this page.
Where to buy MSP430F2418TPN online?
Use the Request a Quote form on this page to request MSP430F2418TPN supply, current availability, order quantities, and delivery information. The manufacturer identifies the part as an 80-pin LQFP (PN), 16 MHz mixed-signal MCU with 116KB flash and 8KB SRAM. For production planning, include the required package form, tube or reel preference, quantity, target date, and any temperature-grade requirements in the request.
What is the price of MSP430F2418TPN?
Current MSP430F2418TPN commercial terms are handled through the Request a Quote form on this page. Submit the required order quantity, package and shipping details, target date, and any traceability requirements to obtain a current quotation. This approach also allows the supplier to confirm stock, minimum order quantity, and lead time for the exact 80-pin LQFP orderable configuration instead of relying on a historical listing value.
Is MSP430F2418TPN in stock and what is its lead time?
Submit an MSP430F2418TPN request through the Request a Quote form on this page to obtain current stock confirmation and a lead-time quotation. Stock status and lead time can vary with order quantity, package form, and procurement conditions, so they should not be assumed from general catalog listings. Include the target date and annual usage in the request so production planning can be based on the actual order configuration.

Engineering reference data for MSP430F2418TPN — comparison, design guidance, and compliance information.

Selection Guide

Choose MSP430F2418TPN for a new mixed-signal design that requires a 16 MHz MSP430 processor, 116KB flash, 8KB SRAM, 12-bit ADC, comparator, hardware multiplier, and I2C, SPI, and UART in an 80-pin LQFP footprint. MSP430F2418IPN is the closest same-family candidate when its ordering-temperature designation matches the deployment, but confirm that grade against the manufacturer ordering table. Consider MSP430F2417TPN or MSP430F2416TPN only after confirming that the reduced memory configuration still supports the linked firmware and that every required peripheral matches. These are family-level PCB-compatible options, not automatic substitutes for software, qualification, or lifecycle requirements. A cross-manufacturer MCU would generally require firmware, toolchain, peripheral, and timing redesign, so it should not be treated as a true drop-in replacement.

Comparison with Alternatives

Parameter This Product MSP430F2418IPN MSP430F2417TPN MSP430F2416TPN
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package LQFP-80 (PN) LQFP-80 (PN) LQFP-80 (PN) LQFP-80 (PN)
Ordering Temperature Suffix TPN - industrial IPN - temperature-grade designation requires confirmation TPN - industrial TPN - industrial

Key Differentiators

  • Largest verified flash configuration among the listed MSP430F2418-family candidates (vs MSP430F2417TPN)
  • Full 8KB SRAM allocation for the listed exact-family comparison (vs MSP430F2416TPN)
  • Direct integration of three common serial interfaces (vs MSP430F2416TPN)

Design Notes

Assign every net from the manufacturer's pin-description table before schematic capture, especially analog inputs, reference-voltage pins, reset, clock, programming, and ground connections. Place decoupling and bulk capacitors close to the corresponding device pins, keep analog inputs away from high-current switching traces, and provide a direct ground return beneath analog circuitry where practical. Prototype the 80-pin LQFP assembly with adequate solder coverage and inspect all fine-pitch joints because adjacent pins can be difficult to rework.

Design the MSP430F2418TPN analog section as a controlled measurement path. Use short traces from the 12-bit ADC and comparator inputs, return analog grounds to the appropriate quiet-ground region, and keep switching-node copper away from these inputs. If an external converter is used, define its interface timing and reference arrangement on the schematic. Validate gain, offset, and noise using the final PCB because connector routing, power-return paths, and adjacent digital activity can affect measurement quality.

Calculate average current from the actual operating mode rather than assuming one current value. Include active acquisition time, serial communication intervals, and idle duration, then use the MSP430F2418 datasheet current tables to estimate each contribution. For battery-powered systems, confirm startup current, run-current limits, shutdown leakage, and the regulator's own quiescent current. Add local bulk energy storage if battery impedance could cause rail disturbance during ADC sampling or transmit bursts.

Do not treat a family member as an automatic replacement merely because it uses the same footprint. MSP430F2417TPN and MSP430F2416TPN require a complete firmware and peripheral review, including flash size, SRAM demand, interrupt vectors, port multiplexing, and device-specific register behavior. Preserve the MSP430 toolchain, linker configuration, target-device settings, and boot procedure. After any substitution, rebuild the complete image and test startup, brownout behavior, analog accuracy, communications, and all used GPIO functions.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The manufacturer product information confirms the device identity and package but does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. Confirm current declarations in the MSP430F2418 material and compliance documentation before procurement.

Data verified on: 2026-11-20 — data verified and curated by XAIPART's component engineering team

Related Searches

MSP430F2418TPN datasheet MSP430F2418TPN pinout MSP430F2418TPN datasheet pdf MSP430F2418TPN equivalent MSP430F2418TPN replacement MSP430F2418TPN price MSP430F2418TPN stock MSP430F2418TPN LQFP-80 pinout Texas Instruments MSP430F2418TPN MSP430F2418TPN vs MSP430F2417TPN MSP430F2418 16MHz 116KB flash MSP430F2418 mixed signal application

Related Components & Terms

Texas Instruments MSP430F2418TPN MSP430F2418 MSP430F2418IPN MSP430F2417TPN MSP430F2416TPN MSP430 microcontroller mixed-signal microcontroller embedded microcontroller 16-bit RISC semiconductor 116KB flash memory 8KB SRAM 12-bit ADC comparator I2C SPI UART hardware multiplier 16 MHz LQFP-80 PN package surface-mount technology industrial sensor node smart meter building control HVAC low-power data logger instrumentation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details