S912XEP768J4MAG - 16-bit 50MHz MCU, 768KB Flash | NXP
MPN: S912XEP768J4MAG ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $12.5 | $12.50 |
| 10 | $11.35 | $113.50 |
| 100 | $10.1 | $1,010.00 |
| 500 | $9.2 | $4,600.00 |
| 1,000 | $8.45 | $8,450.00 |
S912XEP768J4MAG Overview
A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and a rich set of peripherals into one chip, forming the brain of an embedded system. The S912XEP768J4MAG belongs to the 16-bit MCU class and specifically to the HCS12X (S12XE) family, which sits above 8-bit HC08/S08 devices and below 32-bit PowerPC/ARM automotive MCUs such as NXP's SPC5 and S32K series in the NXP automotive portfolio.
Key differentiating features include the XGATE co-processor, a programmable RISC engine that offloads interrupt handling and I/O tasks to build virtual peripherals and boost overall system throughput. A flexible, programmable hardware-emulated EEPROM (D-Flash) enables frequent parameter updates without external memory. A memory protection unit (MPU) with supervisor and user modes provides system-integrity support required in safety-oriented automotive designs. Peripherals include a 12-bit ADC with 3 microsecond conversion time, an enhanced capture timer (ECT), periodic interrupt timer (PIT), real-time interrupt (RTI), PWM channels, and multiple communication interfaces (CAN, SCI, SPI, I2C).
Architecturally, the S12XE CPU is a CISC 16-bit core with an enhanced instruction set and wide bus acceleration, while the XGATE thread processor runs concurrently at the bus clock, effectively multiplying the interrupt service bandwidth. The 768KB Flash supports large application code such as complex CAN-based body control and powertrain supervisory logic.
Typical applications include automotive body control modules, dashboard clusters, HVAC controllers, CAN network gateways, industrial control systems, and motor control units, where a 5V-tolerant, CAN-rich, EMC-robust 16-bit platform is preferred. The device carries an automotive temperature grade per distributor data.
Design consideration: budget Flash programming voltage and D-Flash endurance carefully, and verify CAN physical-layer (e.g., TJA1050/TJA1042 transceiver) termination when planning network nodes.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Drop-in alternatives for S912XEP768J4MAG — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with S912XEP768J4MAG (same form factor and footprint) — differing in Operating Temperature, Core, Package, Supply Voltage, Timers.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
MC9S12XEP768CAG
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$19.85 / Unit
View Datasheet →S912XEP512J4MAG
✅ Drop-In📋 Reference alternative (not in catalog)
S912XEP100BMAGR
✅ Drop-In📋 Reference alternative (not in catalog)
S912XEG384J2VAL
✅ Drop-In✓ In Stock
$17.8 / Unit
View Datasheet →MC9S12XET256CAG
✅ Drop-In✓ In Stock
$10.55 / Unit
View Datasheet →S912XET512BMAGR
✅ Drop-In✓ In Stock
$6.6 / Unit
View Datasheet →S912XEG128W1MAAR
✅ Drop-In📋 Reference alternative (not in catalog)
S912XEP768J4MAG Maximum Ratings & Electrical Characteristics
| Core Processor | HCS12X (S12XE) |
| Core Size | 16-Bit |
| Speed | 50 MHz |
| Co-Processor | XGATE RISC thread processor |
| Flash Program Memory | 768 KB (768K x 8) |
| RAM Size | 64 KB |
| ADC Resolution | 12-Bit |
| ADC Conversion Time | 3 us |
| Connectivity | CAN, I2C, SCI, SPI |
| Peripherals | Enhanced Capture Timer (ECT), PIT, RTI, PWM, LVI, COP |
| Memory Protection | MPU with supervisor/user modes |
| Supply Voltage | 1.8V / 2.8V / 5V (per FindIC listing) |
| Operating Temperature | -40C to +125C (automotive grade) |
| Package | 144-LQFP (20x20 mm) |
| Mounting Type | Surface Mount |
| Terminal Form | Gull Wing |
| Packaging | Tray |
| Temperature Grade | Automotive |
S912XEP768J4MAG 144-lqfp (20x20 mm) Pin Configuration Guide
Pin configuration for S912XEP768J4MAG (144-lqfp (20x20 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for S912XEP768J4MAG.
Refer to the datasheet for full pin configuration.
Typical Applications
S912XEP768J4MAG is suitable for 6 applications: Automotive Body Control Modules, Instrument Cluster and Dashboard Control, CAN Network Gateways, HVAC and Blower Motor Control, Industrial Control and Automation Nodes, Motor Control and Pump Management.
Automotive Body Control Modules
The S912XEP768J4MAG fits body control modules (BCM) because it combines 768KB Flash for feature-rich firmware, multiple CAN interfaces for in-vehicle network nodes, and a 12-bit ADC with 3us conversion time for reading load-current shunts, lamp diagnostics, and door-position sensors. The XGATE co-processor offloads CAN frame handling and switch debouncing from the S12X main CPU, keeping interrupt latency deterministic as message traffic grows. Its hardware-emulated EEPROM (D-Flash) stores learned vehicle configurations and fault logs across power cycles without external serial EEPROM. The MPU with supervisor/user modes protects calibration regions from runaway code, supporting OEM functional-safety audits. Operating from the automotive 5V rail with -40C to +125C grade, it survives under-dash thermal environments directly.
Recommended
Instrument Cluster and Dashboard Control
In dashboard clusters, the S912XEP768J4MAG drives stepper gauges, backlights, and LCD segments using its PWM channels and enhanced capture timer (ECT), while the 12-bit ADC samples fuel-level, coolant-temperature, and battery-voltage inputs with 3us conversions. The 768KB Flash holds localized message tables, telltale logic, and OBD diagnostics for multiple vehicle variants on one MCU, reducing BOM proliferation. CAN and SCI links connect the cluster to the powertrain and body controllers, and the periodic interrupt timer (PIT) paces gauge smoothing filters in software. The 5V-tolerant I/O simplifies direct connection to harness-mounted switch feeds with wire-to-board noise margins. Distributor data confirms the automotive temperature grade needed for direct-sun cabin environments.
Recommended
CAN Network Gateways
The S912XEP768J4MAG serves as a CAN gateway because its XGATE RISC co-processor can dedicate threads to receiving, filtering, and forwarding CAN frames across multiple CAN channels at 50MHz bus speed, while the S12X CPU runs routing tables and diagnostics. The 64KB RAM buffers message queues and DBC-derived signal translation tables that smaller S12X parts cannot hold. Hardware-emulated EEPROM stores gateway routing configurations and security keys through power cycles. The memory protection unit isolates the safety-relevant forwarding engine from application firmware, and supervisor/user modes guard against corrupted descriptor writes. At 768KB Flash there is ample space for UDS/OBD diagnostics stacks alongside the routing application.
Recommended
HVAC and Blower Motor Control
For HVAC controllers, the S912XEP768J4MAG reads cabin, duct, and evaporator thermistors through its 12-bit ADC, generates 21kHz-class PWM for blower motor drives, and closes the loop with the enhanced capture timer measuring feedback tach pulses. Its PIT and RTI timers schedule damper-actuator sequencing without CPU loading, while XGATE handles button-scanning and LIN/CAN messaging concurrently. The 768KB Flash stores air-mix calibration curves for multiple vehicle platforms, and the D-Flash EEPROM keeps actuator position limits learned during end-of-line calibration. The 5V I/O domain directly interfaces with rotary encoder and potentiometer panels, and the automotive temperature grade covers under-hood blower module placements.
Recommended
Industrial Control and Automation Nodes
In industrial equipment, the S912XEP768J4MAG provides a 5V-tolerant, EMC-robust 16-bit platform for machine controllers: the 12-bit/3us ADC digitizes potentiometers and current sensors, SCI and SPI interfaces connect operator panels and precision converters, and CAN links integrate the node into factory fieldbus systems. The 768KB Flash supports large state-machine, batching, and HMI code, while 64KB RAM holds logging buffers. The MPU and supervisor/user modes add fault containment valued in continuous-process machinery. Its D-Flash emulation replaces battery-backed RAM for recipe storage, and the -40C to +125C range permits unventilated cabinet mounting, as reflected in the distributor automotive temperature grade listing.
Recommended
Motor Control and Pump Management
The S912XEP768J4MAG manages DC and stepper motor control loops: eight-class PWM channels drive gate drivers, the ECT captures Hall or optical feedback with fine resolution, and the 12-bit ADC samples phase currents fast enough for current-limit protection at 3us per conversion. XGATE executes the fast inner current loop tasks such as over-current trip response, freeing the S12X CPU for supervisory ramp generation, CAN diagnostics, and fault logging. The 768KB Flash supports fieldbus integration plus multiple motor-profile recipes, and the D-Flash keeps runtime hour meters and learned PID constants across power cycles. Distributor listings confirm the automotive grade suitable for pump modules near engine heat.
Recommended
Recommended Products Summary
Engineering reference data for S912XEP768J4MAG — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MC9S12XEP768CAG | S912XEP512J4MAG | S912XEP100BMAGR | S912XET512BMAGR | MC9S12XET256CAG |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20) | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Flash Memory | 768 KB | 768 KB | 512 KB | 1 MB | 512 KB | 256 KB |
| Core / Co-Processor | HCS12X 16-bit + XGATE | HCS12X 16-bit + XGATE | HCS12X 16-bit + XGATE | HCS12X 16-bit + XGATE | HCS12X 16-bit + XGATE | HCS12X 16-bit + XGATE |
| ADC Resolution | 12-Bit | 12-Bit | 12-Bit | 12-Bit | 12-Bit | 12-Bit |
| Automotive Grade | Yes | Yes | Yes | Yes | Yes | Yes |
| Typical Use Case | Full-featured BCM / gateway | Same, alternate ordering code | Cost-down BCM | Headroom-upgrade designs | Mid-range body electronics | Entry-level nodes |
Key Differentiators
- Largest standard Flash in the pin-compatible S12XEP group (vs S912XEP512J4MAG)
- Larger RAM for protocol stacks than the XET cost-downs (vs S912XET512BMAGR)
- Upgrades are drop-in, not redesigns (vs S912XEP100BMAGR)
- Trade-off: lower bus speed than top S12XE members (vs S912XEP100BMAGR)
Design Notes
Power the S912XEP768J4MAG from a clean 5V rail with local 100nF ceramic decoupling at each VDDX/VDDR pin pair plus 10uF bulk per supply bank, per S12XE family hardware design guidance. Use a load-dump-rated automotive regulator (e.g., 40V input capable) upstream, since the MCU itself is not the limiting device during transients. Keep the VDDA/VDDH analog supply filtered with an RC or ferrite network to preserve 12-bit ADC accuracy, and avoid routing switching-fan returns under the LQFP analog pins.
The 144-LQFP 20x20mm footprint needs a 0.5mm-pitch land pattern per NXP application note layout guidance; length-match CAN route pairs (CTX/CRX) and keep them at least 3W away from noisy inverter or relay traces. Provide a solid ground plane beneath the device and place the CAN transceiver within 30mm of the MCU pins. Do not run crystal traces (EXTAL/XTAL) parallel to fast digital buses; guard the 16MHz-class oscillator with local ground pour to minimize jitter on the 50MHz PLL bus clock.
A frequent mistake is exceeding D-Flash (EEPROM emulation) endurance by logging high-rate data - plan a wear-leveling scheme and confirm cycle limits in the official datasheet before allocating logs. Also verify Flash/RAM budgets when dropping into smaller-memory cost-down variants (S912XET512BMAGR, MC9S12XET256CAG): code linked for 768KB will not fit and the linker map must be re-validated. Finally, confirm the exact ordering suffix - MC9S12XEP768CAG vs S912XEP768J4MAG - packs temperature grade and tray/reel options that must match your production spec.
Compliance Information
Distributor data describes the part as automotive temperature grade; explicit RoHS/REACH/AEC-Q100 statements were not present in the retrieved web data. Verify compliance certificates on the official NXP product page.
