Texas Instruments

SN74LS699N - Synchronous Up/Down Counter | Texas Instruments

MPN: SN74LS699N ✓ Active
20-pin plastic DIP Package
MOQ: 1 |

SN74LS699N Overview

Texas Instruments SN74LS699N is a synchronous up/down counter with an output register and multiplexed three-state outputs, packaged in a 20-pin plastic DIP. It combines binary counting, direction control, registered parallel outputs, and bus-driving capability in one counter IC. The SN74LS699N is associated with the 74LS TTL logic family and is intended for digital control, sequencing, address-generation, and instrumentation systems where registered counter state must drive shared buses.

A counter IC is a member of the broader digital logic hierarchy and increments or decrements a binary state in response to clock events. The 74LS699 architecture adds an output register between the counting section and the external outputs, allowing the presented value to change on a defined clock edge rather than immediately after each internal count transition. This registered architecture helps prevent data races when multiple counters or peripherals share a bus.

The principal functional features include synchronous counting in up or down directions, parallel output registers, and multiplexed three-state outputs. Synchronous operation means the counter state advances on the active clock edge, simplifying timing analysis in multi-stage digital systems. The three-state outputs can place each output in a high-impedance state when the device is not driving the shared bus, helping reduce bus contention when several compatible devices are connected.

The device belongs to the LS logic series, using bipolar TTL-compatible signal levels and standard 74LS-family interface conventions. The output-register stage separates internal counting activity from bus presentation, while the multiplexer determines which registered information appears on the output bus. Designers should consult the manufacturer pin-description table before assigning PCB tracks because each physical pin must be connected according to its dedicated clock, control, count, or output function.

Typical uses include programmable timing generators, pulse and sequence counters, industrial control logic, test-and-measurement equipment, and address or event-counting subsystems. The SN74LS699N is particularly useful when a downstream device requires stable parallel data synchronized to the system clock rather than continuously changing combinational counter outputs.

For new PCB layouts, preserve the standard 20-pin DIP footprint and route all supply pins according to the manufacturer datasheet. Avoid substituting a functionally similar counter without checking output timing, output-enable behavior, clear or load semantics, and the exact multiplexing arrangement. These details determine whether a replacement is truly pin-compatible rather than merely equivalent at a high level.

This product page combines the counter's core function with package guidance, replacement criteria, comparison data, and practical implementation notes. It is designed to help engineers identify the correct 74LS-family counter, verify bus-interface compatibility, and plan a board-level replacement without overlooking the distinctions between registered, multiplexed, and three-state output implementations.

Drop-in alternatives for SN74LS699N — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

74LS699N

✅ Drop-In
📦 PDIP-20
Uses the shortened 74LS699N ordering name while retaining the same 20-pin DIP counter function; rated parameter difference is 0% for the documented counter function.

📋 Reference alternative (not in catalog)

DM74LS699N

✅ Drop-In
📦 PDIP-20
Legacy second-source 74LS699 implementation with the same documented counter function and 20-pin DIP format; timing and electrical limits require comparison against the Texas Instruments datasheet.

📋 Reference alternative (not in catalog)

MC74LS699N

✅ Drop-In
📦 PDIP-20
Legacy 74LS699 counter with a 20-pin DIP configuration; supply-voltage and timing details may differ from SN74LS699N and must be checked before substitution.

📋 Reference alternative (not in catalog)

SN74LS699

✅ Drop-In ⚠️ Specs Unverified
📦 PDIP-20
Same SN74LS699 family and 74LS counter function without the N ordering suffix; function match is 100% while exact commercial ordering and temperature details may differ.

📋 Reference alternative (not in catalog)

74LS699N

✅ Drop-In
📦 PDIP-20
Second-source 74LS699 counter using the original 74-series ordering convention; function is equivalent, with device-specific timing and operating limits requiring validation.

📋 Reference alternative (not in catalog)

SN74LS699N Maximum Ratings & Electrical Characteristics

Function Synchronous up/down counter with output registers and multiplexed three-state outputs
Logic Family 74LS TTL logic
Counting Direction Up or down
Counting Mode Synchronous
Output Register Present
Output Multiplexing Multiplexed
Output State Control Three-state
Package Type 20-pin plastic DIP
Mounting Type Through-hole

SN74LS699N 20-pin plastic dip Pin Configuration Guide

Pin configuration for SN74LS699N (20-pin plastic dip package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

20-pin plastic dip package pinout diagram for SN74LS699N

No detailed pinout data available for SN74LS699N.

Refer to the datasheet for full pin configuration.

Typical Applications

SN74LS699N is suitable for 6 applications: Programmable Sequence Counter, Address Generation and Indexing, Industrial Event-Counting System, Test and Measurement Front End, Digital Waveform and Pulse Counter, Shared-Bus Control Logic.

🏭

Programmable Sequence Counter

The SN74LS699N suits programmable sequence and timing systems because it combines synchronous up/down counting with an output register and multiplexed three-state outputs. It can count external events, select the direction, and present a stable registered state to downstream control logic. The registered output stage helps ensure that data changes at a defined clock boundary rather than immediately after an internal count transition. In a legacy controller, the device can therefore implement event-duration counting, step sequencing, or a compact state index without requiring a separate parallel-output latch. Board designers should verify the exact enable, clear, load, and output-control polarity in the manufacturer pin table before assigning logic states.

🖥️

Address Generation and Indexing

The SN74LS699N can act as an address or index counter in older digital-control equipment, where a processor or sequencer requires a repeatable binary value for selecting a memory location, peripheral, or timing step. Synchronous up/down counting allows the direction of an address sequence to be changed without switching to a separate decrementing counter. Because the outputs are registered and can be tri-stated, the counter can release the bus when another address source becomes active. This makes the device useful in multiplexed control architectures where stable, clock-aligned data and controlled bus participation are more important than maximum counter speed.

🏭

Industrial Event-Counting System

In industrial event-counting systems, the SN74LS699N can accumulate pulses from sensors, position encoders, or machinery and retain the count for a controller. Direction control supports systems that need to distinguish positive and negative motion, while synchronous counting keeps state changes aligned with the external clock. The three-state outputs allow the counter to join a shared data bus without driving it continuously, which simplifies multiplexing with measurement, status, and command circuits. Legacy production equipment can benefit from the part's established 74LS interface behavior, although pulse-width, setup-time, and maximum-frequency requirements must be checked against the actual sensor and wiring conditions.

🔧

Test and Measurement Front End

The SN74LS699N is applicable to legacy test-and-measurement front ends that count test vectors, timing intervals, or instrument events and transfer the result to a controller. Its output register supports stable parallel-bus transfer, while the three-state capability allows multiple instruments or instrument functions to share a common data path. The up/down counting feature can support bipolar counting arrangements in which forward and reverse motion or positive and negative event directions must be accumulated. Engineers should pay particular attention to clock timing, output-enable sequencing, and bus contention prevention because the 74LS interface uses established logic levels rather than modern low-voltage signaling.

🔧

Digital Waveform and Pulse Counter

The SN74LS699N can serve as a pulse-counting element in digital waveform analyzers, function generators, and repetitive timing controllers. Synchronous counting allows its internal state to advance in step with the system clock, and the registered outputs provide a convenient state for downstream timing logic or a display interface. If a system must count both positive and negative directions, the direction input avoids using separate increment and decrement paths. The DIP package and long-lived 74LS function make the device especially relevant to repair and modernization of older laboratory equipment, but the system designer must confirm maximum operating frequency and setup time against the chosen clock and feedback arrangement.

🌐

Shared-Bus Control Logic

The SN74LS699N is well suited to shared-bus control logic because its multiplexed outputs support a high-impedance state when the device is not selected. A system controller can enable the counter during a bus cycle, capture its registered state, and then disable it before another peripheral drives the same lines. This reduces the number of separate parallel counters needed in legacy equipment and provides a practical way to implement operating-mode-dependent count values. Correct design depends on defining output-enable polarity and sequencing in the state machine. PCB implementations must also provide clean clock routing and adequate grounding so that registered outputs remain predictable during bus handshakes.

Recommended Products Summary

74LS699N Same 74LS699 counter function in the original ordering convention Used in: Programmable Sequence Counter, Industrial Event-Counting System, Test and Measurement Front End, Shared-Bus Control Logic SN74LS699 Same SN74LS699 counter family Used in: Programmable Sequence Counter, Test and Measurement Front End, Shared-Bus Control Logic DM74LS699N Legacy second-source 74LS699 counter suitable for a legacy address-generation design Used in: Address Generation and Indexing, Digital Waveform and Pulse Counter MC74LS699N Legacy 74LS699 counter with matching 20-pin DIP architecture Used in: Address Generation and Indexing, Digital Waveform and Pulse Counter SN74LS699N Texas Instruments Used in: Industrial Event-Counting System
What is the function of SN74LS699N?
The SN74LS699N is a synchronous binary up/down counter with an output register and multiplexed three-state outputs. It counts in the direction selected by its control inputs and registers counter data for presentation on the output bus. According to the Texas Instruments manufacturer datasheet, the registered-output architecture separates internal count transitions from the externally driven state, which is useful when downstream circuitry requires stable data at a system clock edge.
What package does SN74LS699N use?
The SN74LS699N uses a 20-pin plastic DIP package intended for through-hole PCB assembly. The DIP footprint provides direct insertion through the board and is suitable for legacy industrial, control, and test equipment. The package body should not be confused with the SOIC-style SN74LS699DW ordering option. Confirm the mechanical drawing and lead dimensions in the Texas Instruments manufacturer datasheet before fabricating or populating a replacement board.
Where can I download the SN74LS699N datasheet PDF?
Download the SN74LS699N datasheet from the Texas Instruments product page or the manufacturer-controlled PDF link associated with the SN74LS699 family. The document contains the pin-description table, truth tables, timing diagrams, recommended operating conditions, and package information needed for PCB design. A mirrored SN74LS699 datasheet is also indexed online, but the Texas Instruments document is the preferred source for current lifecycle and ordering information.
Where can I find the SN74LS699N pinout?
The SN74LS699N pinout is published in the pin-description table and package drawing in the Texas Instruments manufacturer datasheet. Use that table when assigning clock, enable, clear, count, and multiplexed-output signals to the 20-pin DIP. Because several functions differ between count stages and output buses, do not infer assignments from another 74LS counter. A board-level replacement is only pin-compatible when every physical connection retains its original function.
What is the difference between SN74LS699N and SN74LS699DW?
The principal documented ordering difference is the package: SN74LS699N is the through-hole 20-pin DIP version, while SN74LS699DW is the surface-mount device configuration. Their counter and registered-output functionality belongs to the same SN74LS699 family, but their PCB land patterns are not interchangeable. A DIP-to-SOIC substitution therefore requires a different board layout and should not be treated as a direct drop-in replacement for SN74LS699N.
Is SN74LS699N suitable for shared-bus digital systems?
Yes, the SN74LS699N is suitable for shared-bus digital systems because its multiplexed outputs can enter a high-impedance state. This feature allows a bus controller to disable the counter while another device drives the same lines. According to the Texas Instruments manufacturer datasheet, the output register and output-enable behavior must be coordinated with the system clock to prevent contention or unintended data changes.
What can replace SN74LS699N?
A suitable replacement for SN74LS699N must provide the same 20-pin DIP pinout, synchronous counting behavior, registered parallel outputs, and multiplexed three-state output control. Legacy 74LS699 devices from other manufacturers can be considered when their truth tables and timing characteristics match. The part number alone is not sufficient evidence: verify output-enable polarity, clear behavior, count loading, and bus multiplexing before approving a substitution.
Is SN74LS699N the same as 74LS699N?
SN74LS699N and 74LS699N generally identify the same Texas Instruments SN74LS699 counter configuration, with the latter reflecting the older 74-series naming convention and the N suffix denoting the standard through-hole ordering option. The manufacturer datasheet and ordering information should control the final interpretation. Confirm that any proposed device is the 20-pin DIP configuration rather than a surface-mount suffix.
What are the key specifications of SN74LS699N that engineers should know?
The key SN74LS699N specifications are its 20-pin plastic DIP package, synchronous up/down counting, integrated output register, multiplexed outputs, and three-state bus-output capability. The device is designed around 74LS TTL logic conventions. Exact supply voltage, maximum clock frequency, operating-temperature limits, and current specifications should be taken from the Texas Instruments manufacturer datasheet before release, since these values govern timing margin and system compatibility.
SN74LS699N vs 74LS699N: which is better for a legacy replacement?
Choose the ordering variant that exactly matches the required package and qualification requirements of the original design. For an existing 20-pin DIP layout, SN74LS699N is the direct Texas Instruments ordering name, while 74LS699N may be used as an abbreviated catalog identifier. Neither label changes the need to verify pinout and timing. If the original board uses SOIC, a DIP part cannot be installed without a different footprint and mechanical redesign.
When should I choose SN74LS699N over another 74LS counter?
Choose SN74LS699N when the design specifically requires both programmable up/down counting and registered, multiplexed three-state outputs. A basic binary counter may be sufficient when only counting and fixed outputs are needed, while a counter with independent parallel inputs may not match the required bus organization. The decisive criteria are the manufacturer truth table, timing behavior, output-enable control, and the existing PCB pin assignment.
What is the best Fairchild equivalent for SN74LS699N?
The best equivalent is the Fairchild 74LS699-family device configured in the same 20-pin DIP package, provided its truth table, output timing, and three-state control match the Texas Instruments SN74LS699N. A legacy 74-series cross-reference can identify candidate function matches, but engineering approval still requires pin-by-pin comparison and timing verification. Do not substitute a counter with a different output-register or multiplexing arrangement.
Where can I buy SN74LS699N online?
Use the Request a Quote form on this page to request SN74LS699N availability, current unit pricing, and lead time. The part is also indexed under the SN74LS699N Texas Instruments counter listing and a Rochester Electronics catalog entry. Quote requests should specify the required quantity, package, and target delivery date so the correct exact MPN and sourcing condition can be confirmed.
What is the price of SN74LS699N?
Current SN74LS699N pricing is shown through the Request a Quote form on this page. Because legacy counter pricing can change with quantity, market availability, and sourcing condition, use the quote workflow rather than a static price reference. Include the required order quantity and delivery destination to obtain a current quotation for the exact 20-pin DIP ordering code.
What is the lead time for SN74LS699N?
Current lead time for SN74LS699N depends on supplier inventory, order quantity, and the requested delivery schedule. Submit the quantity and required arrival date through the Request a Quote form on this page. For production planning, also confirm the lifecycle status and whether any shipment will be factory-stock, new-old stock, or another sourcing condition before approving the BOM.

Engineering reference data for SN74LS699N — comparison, design guidance, and compliance information.

Selection Guide

Choose SN74LS699N when repairing or reproducing a legacy system that requires a synchronous up/down counter with an output register, multiplexed parallel outputs, and three-state bus control in a 20-pin DIP footprint. The shortened Texas Instruments ordering name 74LS699N is appropriate when it maps to the same device configuration, while DM74LS699N, MC74LS699N, and the Motorola 74LS699N provide legacy second-source options after their truth tables and timing data are checked. SN74LS699 is useful when the exact commercial ordering conditions are acceptable. Do not select the DW surface-mount configuration for an unchanged DIP PCB. For all candidates, verify supply voltage, maximum clock frequency, setup and hold timing, output-enable polarity, clear and load behavior, and every physical pin assignment before approving a drop-in replacement.

Comparison with Alternatives

Parameter This Product 74LS699N DM74LS699N MC74LS699N SN74LS699 74LS699N
Brand Texas Instruments Texas Instruments Fairchild Semiconductor Motorola Texas Instruments Motorola
Package PDIP-20 PDIP-20 PDIP-20 PDIP-20 PDIP-20 PDIP-20
Counter Function Synchronous up/down counter Synchronous up/down counter Synchronous up/down counter Synchronous up/down counter Synchronous up/down counter Synchronous up/down counter
Output Register Present Present Present Present Present Present
Multiplexed Outputs Present Present Present Present Present Present
Three-State Output Control Present Present Present Present Present Present
Logic Family 74LS TTL 74LS TTL 74LS TTL 74LS TTL 74LS TTL 74LS TTL

Key Differentiators

  • Combines registered counting and controlled bus outputs (vs DM74LS699N)
  • Direct ordering option for standard 20-pin DIP legacy boards (vs SN74LS699DW)
  • Programmable direction with registered external state (vs 74LS699)

Design Notes

Route the clock using the shortest practical path and keep it away from multiplexed output nets that switch rapidly. The registered architecture makes the output value predictable at clock boundaries, but poor clock routing can still create setup-time or hold-time violations before the counter registers a new state. Use a defined clock source, avoid unnecessary stubs, and maintain a continuous ground reference beneath the DIP pins.

Do not approve a replacement solely because it is labeled a 74LS699 counter. Compare the complete truth table, output-enable polarity, clear behavior, load behavior, output multiplexing, and timing specifications. A device can provide the same counting function yet differ in control polarity or bus architecture. For SN74LS699N, confirm that the candidate uses the same 20-pin DIP lead arrangement before attempting a physical substitution.

Preserve the standard 20-pin DIP footprint and provide unobstructed access for assembly and maintenance. Follow the manufacturer's pin-description table when assigning every net, especially the enable, clear, count-direction, clock, and multiplexed-output functions. Since the outputs are three-state, ensure the system controller disables the counter before another device drives the shared bus and that no pull-up or pull-down network conflicts with the intended bus topology.

Decouple the supply pins at the counter using the capacitance and placement specified by the manufacturer datasheet. TTL counter outputs can draw transient current when multiplexed buses change state, so adequate local bypass helps prevent supply disturbance from propagating into other logic. Keep high-current switching nodes and inductive loads away from the counter and provide a low-impedance ground path. Verify the design against the device's specified supply voltage rather than assuming modern low-voltage logic levels.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The manufacturer classification identifies the SN74LS699N as a logic IC; no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

SN74LS699N datasheet SN74LS699N pinout SN74LS699N datasheet pdf Texas Instruments SN74LS699N SN74LS699N equivalent SN74LS699N replacement SN74LS699N cross reference SN74LS699N vs 74LS699N SN74LS699N DIP-20 counter SN74LS699N price SN74LS699N stock SN74LS699N application circuit

Related Components & Terms

Texas Instruments SN74LS699N SN74LS699 74LS699N DM74LS699N MC74LS699N 74LS TTL logic synchronous counter up/down counter binary counter output register multiplexed output three-state output high-impedance state PDIP-20 DIP package through-hole mounting legacy counter IC shared data bus programmable sequencing address generation industrial event counting test and measurement bus multiplexing
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details