STMicroelectronics

STM32L151R6T6 - 32MHz Cortex-M3 MCU | STMicroelectronics

MPN: STM32L151R6T6 ✓ Active
2.5 V or 3.3 V Vdss 64-LQFP (10 x 10 mm) Package 32 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

STM32L151R6T6 Overview

The STMicroelectronics STM32L151R6T6 is an ultra-low-power 32-bit Arm Cortex-M3 microcontroller with a 32 MHz operating frequency, 32 KB of Flash memory, and a 64-LQFP 10 x 10 mm package. It combines low-power operation with USB connectivity and a broad set of embedded peripherals for compact control, sensing, communications, and data-acquisition systems.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32L151 belongs to the STM32L1 family of low-power microcontrollers, where the Cortex-M3 core provides deterministic instruction execution and a broad peripheral ecosystem. Its low-power design makes it suitable for battery-operated equipment that must conserve energy while maintaining real-time responsiveness.

Key characteristics include a 32-bit Arm Cortex-M3 core operating at up to 32 MHz, 32 KB of Flash program memory, and operation from 2.5 V or 3.3 V supply rails. The manufacturer identifies USB connectivity as a defining feature of the STM32L151x6 and STM32L151x8 device families. The 64-LQFP package also exposes substantially more I/O than smaller microcontroller packages, making the device practical for designs requiring multiple external interfaces.

The STM32L1 architecture combines an ARM Cortex-M3 RISC core with an instruction set and peripheral framework designed for embedded control. The large pin count allows USB, serial communications, analog measurement, timer, and general-purpose I/O functions to be connected without relying on external interface expanders. Designers should consult the manufacturer datasheet for the exact peripheral mix, clock configuration, pin multiplexing, and electrical limits associated with the STM32L151R6 density.

Typical uses include industrial sensor nodes, low-power USB data loggers, portable measurement instruments, connected accessories, and embedded control boards. Its USB capability is useful for configuration, firmware update, and data transfer, while the low-power architecture supports applications that spend substantial time in sleep or low-power operating states.

PCB design should preserve the pin multiplexing and decoupling requirements defined in the manufacturer datasheet. Place the MCU's supply bypass capacitors close to their power pins, route sensitive analog and clock signals away from fast-switching nodes, and confirm that every assigned 64-LQFP pad matches the intended alternate function before fabrication.

This product page consolidates the exact ordering information, core and memory characteristics, package details, same-family drop-in candidates, practical design guidance, and sourcing information for engineers evaluating the STM32L151R6T6 for a new embedded platform.

Drop-in alternatives for STM32L151R6T6 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with STM32L151R6T6 (same form factor and footprint) — differing in Flash Memory, Package.

STMicroelectronics
Flash Memory: 32 KB
Package: 64-pin LQFP (10x10 mm)
Compare with STM32L151R6T6 →

STM32L151R6T6A

✅ Drop-In ⚠️ Specs Unverified
📦 64-LQFP (10 x 10 mm)
Same 32 MHz Cortex-M3, 32 KB Flash, and 64-LQFP footprint; suffix-specific grade or qualification may differ by up to 30% in operating requirements.

📋 Reference alternative (not in catalog)

STM32L152R6T6A

✅ Drop-In
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
ARM Cortex-M3 32-bit RISC · 32 MHz · 32 KB · 10 KB · 4 KB · 1.65 V to 3.6 V · 64-pin LQFP (10x10 mm) · Up to 8x40 segments

Contact for price

View Datasheet →

STM32L151RBT6D

✅ Drop-In
📦 64-LQFP (10 x 10 mm)
Same STM32L151 family and 64-LQFP footprint at 32 MHz; higher-memory density and grade-specific suffixes can change the stored firmware ceiling by more than 30%.

📋 Reference alternative (not in catalog)

STM32L151RCT6A

✅ Drop-In
📦 64-LQFP (10 x 10 mm)
Same STM32L151 architecture, 32 MHz core, and 64-LQFP footprint; higher Flash density can be more than 30% above the 32 KB target while pin assignments remain package-compatible.

📋 Reference alternative (not in catalog)

STM32L151RET6

✅ Drop-In
📦 64-LQFP (10 x 10 mm)
Same STM32L151 family, 32 MHz core, and comparable 64-pin package; greater Flash density can exceed the target memory by more than 30% and requires firmware review.

📋 Reference alternative (not in catalog)

STM32L151R6T6 Maximum Ratings & Electrical Characteristics

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M3
Instruction Set 32-bit RISC
Maximum Clock Frequency 32 MHz
Flash Memory 32 KB (32K x 8)
Supply Voltage 2.5 V or 3.3 V
Connectivity USB
Package 64-LQFP (10 x 10 mm)
Package Type LQFP
Number of Pins 64 pins
Mounting Type Surface mount

STM32L151R6T6 lqfp Pin Configuration Guide

Pin configuration for STM32L151R6T6 (lqfp package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

lqfp package pinout diagram for STM32L151R6T6

No detailed pinout data available for STM32L151R6T6.

Refer to the datasheet for full pin configuration.

Typical Applications

STM32L151R6T6 is suitable for 6 applications: Low-Power USB Sensor Node, Portable Environmental Monitor, Industrial Control and Data Logger, USB Medical Accessory, Connected Audio Accessory, Battery-Powered IoT Controller.

🧩

Low-Power USB Sensor Node

The STM32L151R6T6 fits a low-power USB sensor node because it combines a 32 MHz Arm Cortex-M3 core with USB connectivity in a 64-LQFP package. The MCU can acquire sensor data, manage timing, format results, and present them through USB while retaining low-power operating modes for duty-cycled measurements. Its 32 KB Flash provides a defined firmware budget, so the application should include only the required drivers, protocol stack, and update functions. The 64-pin package also provides more peripheral and I/O options than a compact 32-pin design, allowing analog inputs, timers, and communication interfaces to be integrated without an expanders.

🌡️

Portable Environmental Monitor

The STM32L151R6T6 is suitable for portable environmental monitoring because its ultra-low-power architecture can process periodic readings rather than remain continuously active. A 32 MHz Cortex-M3 core is sufficient for sensor filtering, threshold evaluation, data logging, and user-interface control, while the 32 KB Flash budget favors compact embedded firmware. Operating from 2.5 V or 3.3 V supports integration with low-energy sensor and radio modules. The 64-LQFP package offers ample pins for analog measurement channels, serial buses, timers, and status indicators, but each assigned signal must be checked against the manufacturer alternate-function table.

🏭

Industrial Control and Data Logger

The STM32L151R6T6 can serve as the local controller in a compact industrial monitoring system that must coordinate sensors, record operating history, and expose data to a host. Its 32-bit Cortex-M3 core provides deterministic control, while the 64-LQFP footprint provides sufficient pins for multiple timers, serial communications, control outputs, and status inputs. The MCU's 32 KB Flash should be sized against the logging format, communications protocol, bootloader, and field-update requirements. Use buffered or flash-backed storage outside the MCU for high-volume logging, and isolate communication and power domains according to the industrial environment.

💊

USB Medical Accessory

The STM32L151R6T6 is appropriate for a connected medical accessory when USB connectivity, compactness, and low-power operation are required. The Cortex-M3 core can manage control logic, status indicators, and communication while the USB interface supports configuration or data transfer. The 64-LQFP package offers more I/O than a minimal controller package, allowing sensor inputs, buttons, displays, and isolation interfaces to be assigned without crowding the board. Because this ordering code is not identified as an AEC-Q100 automotive-grade device, medical qualification depends on the complete system design and applicable risk process rather than the MCU name alone.

🎧

Connected Audio Accessory

The STM32L151R6T6 can control a connected audio accessory that requires USB synchronization, user inputs, status feedback, and deterministic low-power behavior. The 32 MHz Cortex-M3 core is suitable for control firmware, display updates, button handling, and USB descriptors, while the 64-pin package provides flexible I/O allocation. Audio signal-path quality still depends on the external codec or amplifier because the MCU is a controller rather than a high-performance audio converter. Keep sensitive analog routing away from USB and switching nodes, and use the package pin table to assign communication, clock, and control functions before layout release.

📱

Battery-Powered IoT Controller

The STM32L151R6T6 is well suited to a battery-powered IoT controller because it belongs to an ultra-low-power STM32 family and retains USB for configuration, diagnostics, or firmware updates. The 32 MHz Cortex-M3 core can handle sensor fusion, local decisions, and communications while duty-cycled operation reduces energy use. Its 32 KB Flash favors compact application code, and the 64-LQFP footprint offers enough pins for a radio interface, sensors, and status controls. Design the power tree so the MCU can enter low-power states without leaving the USB transceiver, pull-up resistors, or sensors continuously energized.

Recommended Products Summary

What is the STM32L151R6T6?
The STM32L151R6T6 is an ultra-low-power, 32-bit Arm Cortex-M3 microcontroller from STMicroelectronics. It operates at up to 32 MHz, contains 32 KB of Flash memory, supports 2.5 V or 3.3 V operation, and is packaged in a 64-LQFP 10 x 10 mm package. The manufacturer product page identifies USB connectivity as a defining feature of the STM32L151x6 family.
What are the key specifications of STM32L151R6T6?
The STM32L151R6T6 combines a 32-bit Arm Cortex-M3 core, a maximum operating frequency of 32 MHz, 32 KB of Flash memory, USB connectivity, and a 64-pin LQFP package. According to the STMicroelectronics product information, the device is intended for ultra-low-power embedded designs operating from 2.5 V or 3.3 V. Exact SRAM, EEPROM, timing, and peripheral limits should be confirmed in the manufacturer datasheet.
What is the operating voltage of STM32L151R6T6?
The STM32L151R6T6 supports 2.5 V and 3.3 V supply configurations, as identified in the manufacturer product listing and distributor specifications. The selected supply must remain within all absolute maximum and operating limits given in the STMicroelectronics datasheet. Confirm regulator tolerance, decoupling, and voltage-dependent timing requirements before committing the power architecture.
What is the maximum clock frequency of STM32L151R6T6?
The STM32L151R6T6 operates at up to 32 MHz. According to the STMicroelectronics product description, it is built around the 32-bit Arm Cortex-M3 RISC core. Actual application performance also depends on bus configuration, flash wait states, peripheral clock settings, and code execution profile, so use the device configuration procedure in the manufacturer datasheet.
Where can I download the STM32L151R6T6 datasheet PDF?
The official STM32L151R6 product page is the preferred starting point for the STM32L151R6T6 documentation and links to the manufacturer datasheet. It describes the STM32L151x6, STM32L151x8, and STM32L151xB families, including USB connectivity. Use the manufacturer datasheet for the complete pin table, memory map, electrical characteristics, and package drawings.
Where can I find the STM32L151R6T6 pinout?
The STM32L151R6T6 pinout is defined by its 64-LQFP package and the pin-description table in the STMicroelectronics manufacturer datasheet. Because the package contains 64 pins and supports numerous alternate functions, every PCB net should be assigned from that table rather than inferred from a generic STM32 pinout. Verify the exposed-pad and thermal-land requirements from the package drawing.
How much Flash memory does STM32L151R6T6 have?
The STM32L151R6T6 contains 32 KB of Flash memory, organized as 32K x 8 in the manufacturer and distributor specification. This memory stores the boot program and application firmware. Compare the program-image size, bootloader requirements, update strategy, and data-retention needs against the available capacity before deploying the final firmware.
Is STM32L151R6T6 suitable for USB-connected embedded products?
The STM32L151R6T6 is suitable for USB-connected embedded products because STMicroelectronics identifies USB connectivity in the STM32L151x6 family description. The MCU can serve as a low-power control or data-acquisition element alongside a USB interface. Firmware must implement enumeration, descriptors, suspend or resume behavior, and protection according to the manufacturer reference documentation.
STM32L151R6T6 vs STM32L152R6T6 — which is better for my design?
Choose the STM32L151R6T6 when USB connectivity and the STM32L151 peripheral set are required, and consider the STM32L152R6T6 when its additional device capability is required. Both are identified as 32 MHz, 32 KB Flash, 64-pin STM32L1 devices, but the STM32L152 family adds features that are not present in the STM32L151. Review the manufacturer comparison information and migrate only after checking every enabled peripheral.
When should I choose STM32L151R6T6 over STM32L151R6T6A?
Choose STM32L151R6T6A when its specific grade or qualification is required for the target environment; otherwise, STM32L151R6T6 remains the baseline STM32L151x6 option. Both belong to the same STMicroelectronics family and use the 64-LQFP package, but suffix-specific qualification and temperature requirements must be reviewed. The manufacturer datasheet is the controlling source for ordering-code differences.
What can replace STM32L151R6T6 on the same PCB?
The closest same-footprint replacement is STM32L151R6T6A, which retains the STM32L151x6 family architecture and 64-LQFP format. Other STM32L151 and STM32L152 members may share the package but can differ in Flash capacity, temperature grade, qualification, or peripheral set. Validate pin multiplexing, memory size, clock requirements, and application firmware before treating any substitute as drop-in.
Is there a cross-brand drop-in replacement for STM32L151R6T6?
No cross-brand drop-in replacement is established by the available component cross-reference information. The identified substitutes are members of the STMicroelectronics STM32 family rather than independently qualified pin-compatible devices from another manufacturer. For an alternate-vendor program, request a component cross-reference and perform a complete hardware, firmware, peripheral, and qualification review rather than assuming footprint compatibility is sufficient.
Where can I buy STM32L151R6T6 online?
The STM32L151R6T6 can be sourced through the Request a Quote form on this page, where the required part number, quantity, tray packaging, and target delivery location can be specified. Current commercial terms are handled through that form instead of a static offer. Stock status, lead time, and order confirmation should be established for the exact ordering code.
What is the lead time for STM32L151R6T6?
Use the Request a Quote form on this page to request the current lead time and minimum order quantity for STM32L151R6T6. Lead time can vary with order quantity, packaging, and channel availability, so it should be confirmed for the exact tray-packaged ordering code. Request a dated quotation before committing the production build schedule.
Is STM32L151R6T6 in stock?
Current STM32L151R6T6 inventory should be confirmed through the Request a Quote form on this page. The form captures the required quantity and delivery information so the order can be matched to available supply. Do not treat a catalog listing or a family-level stock statement as a guarantee for the exact 64-LQFP tray ordering code.

Engineering reference data for STM32L151R6T6 — comparison, design guidance, and compliance information.

Selection Guide

Choose the STM32L151R6T6 when a design needs a 32 MHz Cortex-M3 controller with 32 KB Flash, USB connectivity, 2.5 V or 3.3 V operation, and a 64-LQFP footprint. It is a practical baseline for low-power sensor nodes, portable instruments, industrial recorders, and connected accessories. Select STM32L151R6T6A when the suffix-specific grade or qualification is required, and select STM32L152R6T6 when the additional STM32L152-family features are justified. The STM32L151RBT6D, STM32L151RCT6A, and STM32L151RET6 options can be considered when greater Flash capacity or another ordering suffix is useful, but the memory, firmware, and qualification implications must be reviewed. No cross-brand drop-in device is established here. For any substitution, verify the pin table, alternate functions, memory resources, clock setup, low-power behavior, peripheral set, and device-specific startup code.

Comparison with Alternatives

Parameter This Product STM32L151R6T6A STM32L152R6T6 STM32L151RBT6D STM32L151RCT6A STM32L151RET6
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Processor Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Core Architecture 32-bit RISC 32-bit RISC 32-bit RISC 32-bit RISC 32-bit RISC 32-bit RISC
USB Connectivity Yes Yes Yes Yes Yes Yes
Product Family STM32L151 STM32L151 STM32L152 STM32L151 STM32L151 STM32L151

Key Differentiators

  • Maintains the exact target memory density for existing firmware constraints (vs STM32L151RCT6A)
  • Uses the STM32L151 control-oriented family rather than the expanded STM32L152 feature set (vs STM32L152R6T6)
  • Baseline ordering code supports an A-suffix family upgrade path on the same footprint (vs STM32L151R6T6A)
  • Matches the 32 KB Flash specification of the STM32L152 comparison device (vs STM32L152R6T6)

Design Notes

Use the manufacturer 64-LQFP land pattern and pin table without modification. Assign each network to the exact pin and alternate function, then place the required supply bypass capacitors close to their associated power pins. Keep the footprint’s exposed thermal and electrical requirements under consideration even when normal board copper is used, and verify all clearances against the selected PCB fabrication rules.

Design the supply for the selected 2.5 V or 3.3 V operating condition and include local high-frequency bypass plus bulk capacitance. Account for USB attachment, sensor loads, and peripheral current when sizing the regulator. Confirm startup, brownout, and maximum voltage limits in the manufacturer electrical characteristics; do not infer safe limits solely from nominal supply labels.

Separate USB routing from sensitive analog and timing signals, provide a continuous return path beneath interfaces, and keep switching-regulator and high-current traces away from the MCU. Route oscillator and reset-related nets according to the manufacturer reference layout when applicable. A quiet ground distribution system and deliberate separation of USB, analog, and power-return paths reduce susceptibility to noise and electromagnetic coupling.

Do not treat another STM32L1 member as automatically interchangeable merely because it uses a 64-LQFP package. Check alternate-function assignments, Flash capacity, SRAM requirements, peripheral availability, temperature grade, qualification suffix, and firmware startup code. For a production migration, build with the replacement’s device headers and compare timing, reset, clock, and low-power behavior against the original design.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The manufacturer product information does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements for this ordering code. These fields remain unknown rather than being inferred from the package or product family.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

STM32L151R6T6 datasheet STM32L151R6T6 specifications STM32L151R6T6 pinout STM32L151R6T6 datasheet pdf STM32L151R6T6 footprint STM32L151R6T6 equivalent STM32L151R6T6 replacement STM32L151R6T6 vs STM32L152R6T6 STM32L151R6T6 USB application circuit STMicroelectronics STM32L151R6T6 STM32L151R6T6 price STM32L151R6T6 stock STM32L151R6T6 32MHz Cortex-M3 STM32L151R6T6 64-LQFP

Related Components & Terms

STMicroelectronics STM32L151R6T6 STM32L151 STM32L152R6T6 STM32L151R6T6A Arm Cortex-M3 microcontroller ultra-low-power microcontroller embedded control 32-bit RISC USB 32 KB Flash 32 MHz 2.5 V 3.3 V 64-LQFP LQFP package surface mount industrial sensor node USB data logger battery-powered IoT portable instrumentation low-power embedded system manufacturer datasheet
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details