STM32L151R6T6 - 32MHz Cortex-M3 MCU | STMicroelectronics
MPN: STM32L151R6T6 ✓ AktifSTM32L151R6T6 Ringkasan
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32L151 belongs to the STM32L1 family of low-power microcontrollers, where the Cortex-M3 core provides deterministic instruction execution and a broad peripheral ecosystem. Its low-power design makes it suitable for battery-operated equipment that must conserve energy while maintaining real-time responsiveness.
Key characteristics include a 32-bit Arm Cortex-M3 core operating at up to 32 MHz, 32 KB of Flash program memory, and operation from 2.5 V or 3.3 V supply rails. The manufacturer identifies USB connectivity as a defining feature of the STM32L151x6 and STM32L151x8 device families. The 64-LQFP package also exposes substantially more I/O than smaller microcontroller packages, making the device practical for designs requiring multiple external interfaces.
The STM32L1 architecture combines an ARM Cortex-M3 RISC core with an instruction set and peripheral framework designed for embedded control. The large pin count allows USB, serial communications, analog measurement, timer, and general-purpose I/O functions to be connected without relying on external interface expanders. Designers should consult the manufacturer datasheet for the exact peripheral mix, clock configuration, pin multiplexing, and electrical limits associated with the STM32L151R6 density.
Typical uses include industrial sensor nodes, low-power USB data loggers, portable measurement instruments, connected accessories, and embedded control boards. Its USB capability is useful for configuration, firmware update, and data transfer, while the low-power architecture supports applications that spend substantial time in sleep or low-power operating states.
PCB design should preserve the pin multiplexing and decoupling requirements defined in the manufacturer datasheet. Place the MCU's supply bypass capacitors close to their power pins, route sensitive analog and clock signals away from fast-switching nodes, and confirm that every assigned 64-LQFP pad matches the intended alternate function before fabrication.
This product page consolidates the exact ordering information, core and memory characteristics, package details, same-family drop-in candidates, practical design guidance, and sourcing information for engineers evaluating the STM32L151R6T6 for a new embedded platform.
Alternatif penggantian untuk STM32L151R6T6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM32L151R6T6 (sama faktor bentuk dan footprint) — berbeda di dalam Flash Memory, Package.
STM32L151R6T6A
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32L152R6T6A
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32L151RBT6D
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
STM32L151RCT6A
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
STM32L151RET6
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
STM32L151R6T6 Rating Maksimal & Karakteristik Listrik
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M3 |
| Instruction Set | 32-bit RISC |
| Frekuensi Bawah Maximum | 32 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Tegangan Pemuat | 2.5 V or 3.3 V |
| Connectivity | USB |
| Paket | 64-LQFP (10 x 10 mm) |
| Package Type | LQFP |
| Jumlah Pin | 64 pins |
| Tipe Mounting | Surface mount |
STM32L151R6T6 lqfp Diamant Konfigurasi Panduan
Konfigurasi pin untuk STM32L151R6T6 (lqfp pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk STM32L151R6T6.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
STM32L151R6T6 cocok untuk 6 aplikasis: Low-Power USB Sensor Node, Portable Environmental Monitor, Industrial Control and Data Logger, USB Medical Accessory, Connected Audio Accessory, Battery-Powered IoT Controller.
Low-Power USB Sensor Node
The STM32L151R6T6 fits a low-power USB sensor node because it combines a 32 MHz Arm Cortex-M3 core with USB connectivity in a 64-LQFP package. The MCU can acquire sensor data, manage timing, format results, and present them through USB while retaining low-power operating modes for duty-cycled measurements. Its 32 KB Flash provides a defined firmware budget, so the application should include only the required drivers, protocol stack, and update functions. The 64-pin package also provides more peripheral and I/O options than a compact 32-pin design, allowing analog inputs, timers, and communication interfaces to be integrated without an expanders.
Direkomendasikan
Portable Environmental Monitor
The STM32L151R6T6 is suitable for portable environmental monitoring because its ultra-low-power architecture can process periodic readings rather than remain continuously active. A 32 MHz Cortex-M3 core is sufficient for sensor filtering, threshold evaluation, data logging, and user-interface control, while the 32 KB Flash budget favors compact embedded firmware. Operating from 2.5 V or 3.3 V supports integration with low-energy sensor and radio modules. The 64-LQFP package offers ample pins for analog measurement channels, serial buses, timers, and status indicators, but each assigned signal must be checked against the manufacturer alternate-function table.
Direkomendasikan
Industrial Control and Data Logger
The STM32L151R6T6 can serve as the local controller in a compact industrial monitoring system that must coordinate sensors, record operating history, and expose data to a host. Its 32-bit Cortex-M3 core provides deterministic control, while the 64-LQFP footprint provides sufficient pins for multiple timers, serial communications, control outputs, and status inputs. The MCU's 32 KB Flash should be sized against the logging format, communications protocol, bootloader, and field-update requirements. Use buffered or flash-backed storage outside the MCU for high-volume logging, and isolate communication and power domains according to the industrial environment.
Direkomendasikan
USB Medical Accessory
The STM32L151R6T6 is appropriate for a connected medical accessory when USB connectivity, compactness, and low-power operation are required. The Cortex-M3 core can manage control logic, status indicators, and communication while the USB interface supports configuration or data transfer. The 64-LQFP package offers more I/O than a minimal controller package, allowing sensor inputs, buttons, displays, and isolation interfaces to be assigned without crowding the board. Because this ordering code is not identified as an AEC-Q100 automotive-grade device, medical qualification depends on the complete system design and applicable risk process rather than the MCU name alone.
Direkomendasikan
Connected Audio Accessory
The STM32L151R6T6 can control a connected audio accessory that requires USB synchronization, user inputs, status feedback, and deterministic low-power behavior. The 32 MHz Cortex-M3 core is suitable for control firmware, display updates, button handling, and USB descriptors, while the 64-pin package provides flexible I/O allocation. Audio signal-path quality still depends on the external codec or amplifier because the MCU is a controller rather than a high-performance audio converter. Keep sensitive analog routing away from USB and switching nodes, and use the package pin table to assign communication, clock, and control functions before layout release.
Direkomendasikan
Battery-Powered IoT Controller
The STM32L151R6T6 is well suited to a battery-powered IoT controller because it belongs to an ultra-low-power STM32 family and retains USB for configuration, diagnostics, or firmware updates. The 32 MHz Cortex-M3 core can handle sensor fusion, local decisions, and communications while duty-cycled operation reduces energy use. Its 32 KB Flash favors compact application code, and the 64-LQFP footprint offers enough pins for a radio interface, sensors, and status controls. Design the power tree so the MCU can enter low-power states without leaving the USB transceiver, pull-up resistors, or sensors continuously energized.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM32L151R6T6 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM32L151R6T6A | STM32L152R6T6 | STM32L151RBT6D | STM32L151RCT6A | STM32L151RET6 |
|---|---|---|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Core Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| USB Connectivity | Yes | Yes | Yes | Yes | Yes | Yes |
| Product Family | STM32L151 | STM32L151 | STM32L152 | STM32L151 | STM32L151 | STM32L151 |
Diferensiator Kunci
- Maintains the exact target memory density for existing firmware constraints (vsSTM32L151RCT6A)
- Uses the STM32L151 control-oriented family rather than the expanded STM32L152 feature set (vsSTM32L152R6T6)
- Baseline ordering code supports an A-suffix family upgrade path on the same footprint (vsSTM32L151R6T6A)
- Matches the 32 KB Flash specification of the STM32L152 comparison device (vsSTM32L152R6T6)
Catatan Desain
Use the manufacturer 64-LQFP land pattern and pin table without modification. Assign each network to the exact pin and alternate function, then place the required supply bypass capacitors close to their associated power pins. Keep the footprint’s exposed thermal and electrical requirements under consideration even when normal board copper is used, and verify all clearances against the selected PCB fabrication rules.
Design the supply for the selected 2.5 V or 3.3 V operating condition and include local high-frequency bypass plus bulk capacitance. Account for USB attachment, sensor loads, and peripheral current when sizing the regulator. Confirm startup, brownout, and maximum voltage limits in the manufacturer electrical characteristics; do not infer safe limits solely from nominal supply labels.
Separate USB routing from sensitive analog and timing signals, provide a continuous return path beneath interfaces, and keep switching-regulator and high-current traces away from the MCU. Route oscillator and reset-related nets according to the manufacturer reference layout when applicable. A quiet ground distribution system and deliberate separation of USB, analog, and power-return paths reduce susceptibility to noise and electromagnetic coupling.
Do not treat another STM32L1 member as automatically interchangeable merely because it uses a 64-LQFP package. Check alternate-function assignments, Flash capacity, SRAM requirements, peripheral availability, temperature grade, qualification suffix, and firmware startup code. For a production migration, build with the replacement’s device headers and compare timing, reset, clock, and low-power behavior against the original design.
Informasi Konformitas
The manufacturer product information does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements for this ordering code. These fields remain unknown rather than being inferred from the package or product family.