STM32L151R6T6 - 32MHz Cortex-M3 MCU | STMicroelectronics
MPN: STM32L151R6T6 ✓ Hoạt độngSTM32L151R6T6 Tóm tắt
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32L151 belongs to the STM32L1 family of low-power microcontrollers, where the Cortex-M3 core provides deterministic instruction execution and a broad peripheral ecosystem. Its low-power design makes it suitable for battery-operated equipment that must conserve energy while maintaining real-time responsiveness.
Key characteristics include a 32-bit Arm Cortex-M3 core operating at up to 32 MHz, 32 KB of Flash program memory, and operation from 2.5 V or 3.3 V supply rails. The manufacturer identifies USB connectivity as a defining feature of the STM32L151x6 and STM32L151x8 device families. The 64-LQFP package also exposes substantially more I/O than smaller microcontroller packages, making the device practical for designs requiring multiple external interfaces.
The STM32L1 architecture combines an ARM Cortex-M3 RISC core with an instruction set and peripheral framework designed for embedded control. The large pin count allows USB, serial communications, analog measurement, timer, and general-purpose I/O functions to be connected without relying on external interface expanders. Designers should consult the manufacturer datasheet for the exact peripheral mix, clock configuration, pin multiplexing, and electrical limits associated with the STM32L151R6 density.
Typical uses include industrial sensor nodes, low-power USB data loggers, portable measurement instruments, connected accessories, and embedded control boards. Its USB capability is useful for configuration, firmware update, and data transfer, while the low-power architecture supports applications that spend substantial time in sleep or low-power operating states.
PCB design should preserve the pin multiplexing and decoupling requirements defined in the manufacturer datasheet. Place the MCU's supply bypass capacitors close to their power pins, route sensitive analog and clock signals away from fast-switching nodes, and confirm that every assigned 64-LQFP pad matches the intended alternate function before fabrication.
This product page consolidates the exact ordering information, core and memory characteristics, package details, same-family drop-in candidates, practical design guidance, and sourcing information for engineers evaluating the STM32L151R6T6 for a new embedded platform.
Bộ thay thế dễ dàng lắp đặt cho STM32L151R6T6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32L151R6T6 (cùng hình factor và footprint) — khác nhau ở Flash Memory, Package.
STM32L151R6T6A
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L152R6T6A
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STM32L151RBT6D
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32L151RCT6A
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32L151RET6
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32L151R6T6 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M3 |
| Instruction Set | 32-bit RISC |
| Tần số xung maksimum | 32 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Điện áp cung cấp | 2.5 V or 3.3 V |
| Connectivity | USB |
| Hộp | 64-LQFP (10 x 10 mm) |
| Package Type | LQFP |
| Số lượng chân | 64 pins |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân STM32L151R6T6 lqfp
Cấu hình chân cho STM32L151R6T6 (lqfp gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32L151R6T6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32L151R6T6 phù hợp cho 6 Áp dụngs: Low-Power USB Sensor Node, Portable Environmental Monitor, Industrial Control and Data Logger, USB Medical Accessory, Connected Audio Accessory, Battery-Powered IoT Controller.
Low-Power USB Sensor Node
The STM32L151R6T6 fits a low-power USB sensor node because it combines a 32 MHz Arm Cortex-M3 core with USB connectivity in a 64-LQFP package. The MCU can acquire sensor data, manage timing, format results, and present them through USB while retaining low-power operating modes for duty-cycled measurements. Its 32 KB Flash provides a defined firmware budget, so the application should include only the required drivers, protocol stack, and update functions. The 64-pin package also provides more peripheral and I/O options than a compact 32-pin design, allowing analog inputs, timers, and communication interfaces to be integrated without an expanders.
Được đề xuất
Portable Environmental Monitor
The STM32L151R6T6 is suitable for portable environmental monitoring because its ultra-low-power architecture can process periodic readings rather than remain continuously active. A 32 MHz Cortex-M3 core is sufficient for sensor filtering, threshold evaluation, data logging, and user-interface control, while the 32 KB Flash budget favors compact embedded firmware. Operating from 2.5 V or 3.3 V supports integration with low-energy sensor and radio modules. The 64-LQFP package offers ample pins for analog measurement channels, serial buses, timers, and status indicators, but each assigned signal must be checked against the manufacturer alternate-function table.
Được đề xuất
Industrial Control and Data Logger
The STM32L151R6T6 can serve as the local controller in a compact industrial monitoring system that must coordinate sensors, record operating history, and expose data to a host. Its 32-bit Cortex-M3 core provides deterministic control, while the 64-LQFP footprint provides sufficient pins for multiple timers, serial communications, control outputs, and status inputs. The MCU's 32 KB Flash should be sized against the logging format, communications protocol, bootloader, and field-update requirements. Use buffered or flash-backed storage outside the MCU for high-volume logging, and isolate communication and power domains according to the industrial environment.
Được đề xuất
USB Medical Accessory
The STM32L151R6T6 is appropriate for a connected medical accessory when USB connectivity, compactness, and low-power operation are required. The Cortex-M3 core can manage control logic, status indicators, and communication while the USB interface supports configuration or data transfer. The 64-LQFP package offers more I/O than a minimal controller package, allowing sensor inputs, buttons, displays, and isolation interfaces to be assigned without crowding the board. Because this ordering code is not identified as an AEC-Q100 automotive-grade device, medical qualification depends on the complete system design and applicable risk process rather than the MCU name alone.
Được đề xuất
Connected Audio Accessory
The STM32L151R6T6 can control a connected audio accessory that requires USB synchronization, user inputs, status feedback, and deterministic low-power behavior. The 32 MHz Cortex-M3 core is suitable for control firmware, display updates, button handling, and USB descriptors, while the 64-pin package provides flexible I/O allocation. Audio signal-path quality still depends on the external codec or amplifier because the MCU is a controller rather than a high-performance audio converter. Keep sensitive analog routing away from USB and switching nodes, and use the package pin table to assign communication, clock, and control functions before layout release.
Được đề xuất
Battery-Powered IoT Controller
The STM32L151R6T6 is well suited to a battery-powered IoT controller because it belongs to an ultra-low-power STM32 family and retains USB for configuration, diagnostics, or firmware updates. The 32 MHz Cortex-M3 core can handle sensor fusion, local decisions, and communications while duty-cycled operation reduces energy use. Its 32 KB Flash favors compact application code, and the 64-LQFP footprint offers enough pins for a radio interface, sensors, and status controls. Design the power tree so the MCU can enter low-power states without leaving the USB transceiver, pull-up resistors, or sensors continuously energized.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32L151R6T6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32L151R6T6A | STM32L152R6T6 | STM32L151RBT6D | STM32L151RCT6A | STM32L151RET6 |
|---|---|---|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Core Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| USB Connectivity | Yes | Yes | Yes | Yes | Yes | Yes |
| Product Family | STM32L151 | STM32L151 | STM32L152 | STM32L151 | STM32L151 | STM32L151 |
Bảo phân biệt quan trọng
- Maintains the exact target memory density for existing firmware constraints (vsSTM32L151RCT6A)
- Uses the STM32L151 control-oriented family rather than the expanded STM32L152 feature set (vsSTM32L152R6T6)
- Baseline ordering code supports an A-suffix family upgrade path on the same footprint (vsSTM32L151R6T6A)
- Matches the 32 KB Flash specification of the STM32L152 comparison device (vsSTM32L152R6T6)
Ghi chú thiết kế
Use the manufacturer 64-LQFP land pattern and pin table without modification. Assign each network to the exact pin and alternate function, then place the required supply bypass capacitors close to their associated power pins. Keep the footprint’s exposed thermal and electrical requirements under consideration even when normal board copper is used, and verify all clearances against the selected PCB fabrication rules.
Design the supply for the selected 2.5 V or 3.3 V operating condition and include local high-frequency bypass plus bulk capacitance. Account for USB attachment, sensor loads, and peripheral current when sizing the regulator. Confirm startup, brownout, and maximum voltage limits in the manufacturer electrical characteristics; do not infer safe limits solely from nominal supply labels.
Separate USB routing from sensitive analog and timing signals, provide a continuous return path beneath interfaces, and keep switching-regulator and high-current traces away from the MCU. Route oscillator and reset-related nets according to the manufacturer reference layout when applicable. A quiet ground distribution system and deliberate separation of USB, analog, and power-return paths reduce susceptibility to noise and electromagnetic coupling.
Do not treat another STM32L1 member as automatically interchangeable merely because it uses a 64-LQFP package. Check alternate-function assignments, Flash capacity, SRAM requirements, peripheral availability, temperature grade, qualification suffix, and firmware startup code. For a production migration, build with the replacement’s device headers and compare timing, reset, clock, and low-power behavior against the original design.
Thông tin tuân thủ
The manufacturer product information does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements for this ordering code. These fields remain unknown rather than being inferred from the package or product family.