Texas Instruments

THS1040CPW - 10-Bit 40-MSPS Pipelined ADC | Texas Instruments

MPN: THS1040CPW ✓ Active
3 V Vdss 28-TSSOP (0.173 inch, 4.40 mm width) Package
MOQ: 1 |

THS1040CPW Overview

The Texas Instruments THS1040CPW is a 10-bit, single-channel, pipelined analog-to-digital converter operating at 40 MSPS from a single 3 V supply in a 28-pin TSSOP package. It accepts either single-ended or differential analog inputs and supports multiple voltage-reference arrangements, giving designers flexibility in signal-chain design.

An analog-to-digital converter, or ADC, converts an analog voltage into a numeric code for processing by digital equipment. The pipelined ADC architecture belongs to the broader semiconductor and data-converter hierarchy. Its multistage conversion process supports high sampling rates, while the 10-bit resolution provides 1,024 possible output codes. The THS1040 is positioned for compact systems that need high-speed sampling without the resolution of a 14-bit or 16-bit converter.

Key characteristics include a 40 MHz sampling rate, 10-bit resolution, single 3 V operation, and one analog input channel. The device accepts single-ended or differential signals, which allows it to interface with sensors, communications receivers, instrumentation, or signal-conditioning circuits. Parallel digital outputs support direct connection to digital logic, while selectable reference options help tailor the converter to different input ranges and system architectures.

The THS1040 uses a CMOS, low-power pipelined architecture. CMOS construction is suitable for low-voltage digital and mixed-signal systems, while the pipeline stages enable throughput suitable for repetitive waveform capture. At 40 MSPS, the converter can acquire 40 million samples each second. Exact input bandwidth, conversion latency, power consumption, output coding, and timing values should be confirmed in the manufacturer datasheet for the selected clock and reference configuration.

Typical uses include communications infrastructure, industrial measurement, data acquisition, radar or signal analysis, and embedded imaging systems. Differential input operation is especially useful when the source has low amplitude or the analog signal experiences common-mode interference. Single-ended operation can simplify systems where a balanced sensor interface is unnecessary. The 28-pin TSSOP package supports compact surface-mount PCB construction.

Designers should use the pin-description table and typical application circuit in the manufacturer datasheet when assigning traces, selecting bypass capacitors, and establishing the analog and digital return paths. Keep high-speed digital clock and output routing away from the analog input and reference networks, and provide a low-impedance return path to minimize code-dependent noise. This page combines the verified device description, sourcing information, practical design guidance, and drop-in replacement analysis for faster component evaluation.

Drop-in alternatives for THS1040CPW — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with THS1040CPW (same form factor and footprint) — differing in Package, Analog Supply Voltage, Architecture, Digital Supply Voltage, Input Type.

Texas Instruments
Package: 28-pin TSSOP
Analog Supply Voltage: 3.0 V to 3.6 V
Architecture: Pipelined ADC
Compare with THS1040CPW →
Texas Instruments
Package: 28-TSSOP (PW), 4.40 mm body width
Analog Supply Voltage: 3 V
Architecture: Pipelined
Compare with THS1040CPW →

THS1041CPWRG4

✅ Drop-In
📦 28-TSSOP
Same 10-bit resolution and 40 MSPS rate; device-specific clock, reference, and output details must be compared before substitution

📋 Reference alternative (not in catalog)

THS1041IPWRG4

✅ Drop-In
Texas Instruments
📦 28-TSSOP
10 bit · 40 MSPS · 1 · Differential, Single-Ended · Parallel · S/H-PGA-ADC · Pipelined · 1:1

Contact for price

View Datasheet →

THS1041IPWRG4

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 28-TSSOP
10 bit · 40 MSPS · 1 · Differential, Single-Ended · Parallel · S/H-PGA-ADC · Pipelined · 1:1

Contact for price

View Datasheet →

THS1041CPW

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 28-TSSOP
10 bit · 40 MSPS · 1 channel · Pipelined ADC · Differential and single-ended · Integrated PGA · Internal precision clamp · 3.0 V to 3.6 V

Contact for price

View Datasheet →

THS1040CPW Maximum Ratings & Electrical Characteristics

Converter Type Pipelined analog-to-digital converter
Resolution 10 bit
Sampling Rate 40 MSPS
Number of Channels 1 channel
Supply Voltage 3 V
Input Type Single-ended or differential
Technology CMOS
Power Class Low-power ADC
Package 28-TSSOP (0.173 inch, 4.40 mm width)
Mounting Type Surface mount
Output Interface Parallel
Reference Selection Multiple voltage-reference options
Analog Input Count 1 input
Number of Output Codes 1,024 codes
Maximum Sample Rate 40 million samples per second

THS1040CPW 28-tssop (0.173 inch, 4.40 mm width) Pin Configuration Guide

Pin configuration for THS1040CPW (28-tssop (0.173 inch, 4.40 mm width) package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

28-tssop (0.173 inch, 4.40 mm width) package pinout diagram for THS1040CPW

No detailed pinout data available for THS1040CPW.

Refer to the datasheet for full pin configuration.

Typical Applications

THS1040CPW is suitable for 6 applications: Communications Receiver Digitization, Industrial Data Acquisition, Waveform and Signal Analysis, Sensor Signal Conditioning, Imaging and Video Sampling, Test and Measurement Equipment.

🌐

Communications Receiver Digitization

The THS1040CPW fits receiver front ends that require rapid conversion of intermediate-frequency or demodulated analog signals into parallel digital data. Its 10-bit resolution produces 1,024 codes, while the 40 MSPS pipelined architecture supports acquisition of 40 million samples per second. Differential input operation can simplify connection to balanced mixer or transceiver outputs and improve rejection of common-mode noise. The single 3 V supply also reduces the number of rails required around the converter. The primary design check is that the source bandwidth, clock jitter, and acquisition timing remain suitable for the modulation bandwidth. Use the manufacturer application information to determine input range and reference settings, and keep parallel output routing away from the analog input.

🏭

Industrial Data Acquisition

The THS1040CPW is suitable for compact industrial acquisition modules that sample waveforms or sensor outputs at tens of millions of samples per second. Its 10-bit resolution is appropriate for monitoring and control tasks where 1,024 digital levels provide adequate measurement detail, while the 40 MSPS pipeline throughput supports transient capture. Differential input can serve active transducers or balanced signal-conditioning stages, and single-ended input provides a simpler path for lower-level source circuits. Because the converter operates from 3 V, it can share a local rail with compatible digital logic. Confirm the industrial temperature grade, input bandwidth, clock-jitter sensitivity, and calibration requirements in the manufacturer datasheet before production deployment.

🖥️

Waveform and Signal Analysis

The THS1040CPW can serve as the sampling front end in compact waveform analyzers and bench instrumentation. A 40 MSPS rate captures substantially more temporal detail than a kilohertz-class measurement system, allowing short-duration events to be represented digitally, while the 10-bit result provides 1,024 quantization levels for amplitude analysis. The parallel output supports direct handoff to FPGA or digital processing logic when deterministic timing is important. Differential analog connections can reduce interference in laboratory environments, and the 28-TSSOP package helps maintain a compact board footprint. Designers should evaluate input bandwidth, aliasing, reference stability, clock quality, and acquisition latency using the datasheet timing and application information.

🧩

Sensor Signal Conditioning

The THS1040CPW is useful in high-speed sensor interfaces where the analog output must be digitized for filtering, storage, or machine interpretation. Its support for single-ended and differential inputs allows selection according to the sensor architecture: a grounded sensor may use the simpler single-ended route, while a balanced bridge or differential amplifier may connect directly. At 40 MSPS, the converter can preserve time-dependent features in vibration, position, or imaging signals, subject to adequate source bandwidth and clock performance. The 3 V CMOS architecture supports integration with low-voltage digital sections. Keep sensor traces short, provide stable reference bypassing, and follow the recommended analog grounding scheme to prevent quantization-sensitive noise from appearing in the converted data.

📺

Imaging and Video Sampling

The THS1040CPW can form the conversion stage of compact imaging or video-processing systems requiring 10-bit sample resolution at 40 MSPS. Parallel outputs provide a straightforward interface to digital image-processing logic, and the single 3 V operation is useful in space-constrained boards. Differential input is valuable when pixel-array or sensor outputs are internally balanced, helping preserve signal integrity over cable or board-trace distances. The effective spatial or temporal performance still depends on the sensor output bandwidth, clocking strategy, reference accuracy, and subsequent digital filtering. Confirm the converter's input range and clock timing against the sensor interface, and isolate analog and digital return currents to avoid correlated errors in the digitized image data.

🔧

Test and Measurement Equipment

The THS1040CPW is appropriate for portable or rack-mounted test equipment that samples waveforms at a higher rate than conventional low-speed measurement converters. The 40 MSPS pipelined throughput supports transient and repetitive-signal capture, and the 10-bit output gives 1,024 digital levels for display or analysis. A differential input connection can improve noise immunity in multi-board systems, while the parallel output can feed an FPGA for filtering or triggering. The 28-TSSOP package requires careful attention to lead spacing and thermal management but supports conventional surface-mount assembly. Designers should base bandwidth, input impedance, reference selection, and timing decisions on the manufacturer datasheet and validate clock-jitter performance across the intended operating-temperature range.

What are the key specifications of THS1040CPW that engineers should know?
The THS1040CPW is a 10-bit, single-channel pipelined ADC that samples at 40 MSPS from a single 3 V supply. According to the Texas Instruments THS1040 datasheet, it uses CMOS technology, accepts single-ended or differential inputs, provides parallel digital outputs, and supports several voltage-reference arrangements. The 28-TSSOP package is suitable for compact surface-mount designs. Its 1,024-code output is appropriate when throughput is more important than 14-bit or 16-bit conversion resolution.
What is the operating voltage of THS1040CPW?
The THS1040CPW operates from a single 3 V supply. The Texas Instruments THS1040 datasheet identifies the converter as a 3 V CMOS ADC, allowing the analog, reference, and digital interfaces to be integrated into a low-voltage system. Exact supply-current limits, allowed supply tolerance, and sequencing requirements should be checked in the manufacturer datasheet before finalizing the power architecture.
What is the resolution and sampling rate of THS1040CPW?
The THS1040CPW provides 10-bit resolution and a maximum sampling rate of 40 MSPS. Its 10-bit output supports 1,024 distinct numerical codes, while the pipelined architecture enables acquisition of 40 million samples per second. According to the Texas Instruments THS1040 datasheet, this combination is intended for high-speed data conversion where 10-bit resolution is sufficient for communications, instrumentation, or signal-processing applications.
Can THS1040CPW accept both single-ended and differential inputs?
Yes, the THS1040CPW supports either single-ended or differential analog input. The Texas Instruments THS1040 datasheet describes this input flexibility as allowing designers to match the converter to different source circuits. Differential operation can improve common-mode rejection and suit balanced sensor signals, while single-ended operation can simplify lower-complexity designs. Input range, common-mode limits, and recommended source impedance should be confirmed from the manufacturer datasheet.
Where can I download the THS1040CPW datasheet PDF?
The THS1040CPW datasheet PDF is available through the manufacturer data link listed on this page, with an additional copy hosted by the Texas Instruments document repository. Use the manufacturer datasheet for authoritative pin assignments, timing diagrams, reference configurations, recommended decoupling, and electrical characteristics. The document is identified generically as the THS1040 3-V, 10-Bit, 40-MSPS CMOS Analog-to-Digital Converter datasheet.
Where can I find the THS1040CPW pinout?
The THS1040CPW pinout is defined in the pin-configuration section of the Texas Instruments THS1040 datasheet. The device uses a 28-TSSOP package, but the complete numbered signal list is not printed in the available product summary, so use the manufacturer pin-description table when assigning PCB nets. Pay particular attention to analog input, voltage reference, clock, output-data, power, and ground assignments before routing the board.
What can replace THS1040CPW without changing the PCB?
THS1041CPWRG4 is the closest identified replacement candidate because it retains the 28-TSSOP format and closely related 10-bit, 40 MSPS, 3 V converter characteristics. THS1041IPWRG4 is another 28-TSSOP candidate with the same headline resolution, sampling rate, and supply class. Verify clock polarity, output timing, reference configuration, pin names, and temperature grade against the manufacturer datasheets before treating either part as a confirmed drop-in replacement.
Is THS1040CPW the same as THS1041CPWRG4?
The THS1040CPW and THS1041CPWRG4 are closely related 10-bit, 40 MSPS, 3 V ADCs in a 28-TSSOP package, but they should not be assumed identical. According to the component comparison information, their terminals and package are consistent, while the THS1041 may differ in timing, interface, or device details. Confirm the pin descriptions, clock requirements, output coding, reference options, and electrical limits for the specific orderable part before substitution.
THS1040CPW vs THS1041CPWRG4: which is better for a 40 MSPS design?
Choose THS1041CPWRG4 when its documented clocking, reference, and interface behavior matches an existing 28-TSSOP PCB more closely than the THS1040CPW; both provide 10-bit resolution and 40 MSPS sampling from 3 V. Retain the THS1040CPW when its established design has been validated and no qualification is required. The deciding factors are exact pin behavior, conversion latency, output timing, reference setup, and lifecycle needs rather than headline resolution and speed.
When should I choose THS1040CPW over THS1041CPWRG4?
Choose THS1040CPW when the board was designed around its verified clock, reference, output, and power configuration or when changing the ADC would require revalidating signal integrity and acquisition timing. The THS1040CPW provides 10-bit resolution and 40 MSPS throughput in 28-TSSOP, making it suitable for compact high-speed acquisition systems. Select the THS1041CPWRG4 instead only after comparing its detailed timing and pin descriptions against the original implementation.
Is THS1040CPW suitable for industrial data acquisition and communications?
The THS1040CPW is suitable for many 40 MSPS data-acquisition and communications front ends when 10-bit resolution is adequate. Its single-ended or differential input support accommodates both direct sensor signals and balanced receiver outputs, while the parallel interface simplifies connection to digital processing logic. For industrial deployment, verify operating-temperature limits, clock-jitter tolerance, analog bandwidth, EMC requirements, and system-level calibration before releasing the design.
How should I design the PCB layout for THS1040CPW?
Place the THS1040CPW close to the analog source and keep the clock and parallel output traces physically separated from the analog input and reference network. Use the application schematic and layout guidance in the Texas Instruments datasheet for bypass-capacitor placement and grounding. A solid, low-impedance return plane reduces code-dependent errors, while short reference and input paths reduce susceptibility to parasitic pickup and digital coupling.
What thermal and power considerations apply to the THS1040CPW?
The THS1040CPW is identified as a low-power 3 V CMOS ADC, but exact current and thermal-rise figures must be taken from the manufacturer datasheet for the selected clock and I/O conditions. Keep supply and ground paths short, provide the specified local decoupling, and avoid enclosing the device in a thermally insulating area on the board. Validate junction temperature under the highest expected sample rate and digital-output activity.
Where can I buy THS1040CPW and check current lead time?
Use the Request a Quote form on this page to request THS1040CPW availability, current lead time, and order quantities. The verified listings show the exact 28-TSSOP device, but their summaries do not provide a complete quantity-break price table or a reliable stock quantity. The form allows buyers to obtain an order response without relying on potentially stale listing snippets.
Is THS1040CPW currently in stock?
Current inventory for the exact THS1040CPW should be confirmed through the Request a Quote form on this page. The available listings identify the part as a 10-bit, 40 MSPS ADC in a 28-TSSOP package, but their summaries do not establish a consistent current stock count. Treat a quote response as the source for project-specific availability, scheduling, and minimum-order requirements.
What is the best cross-brand equivalent for THS1040CPW?
No verified cross-brand drop-in equivalent was identified for the THS1040CPW. A valid replacement must match the 28-TSSOP footprint and pin behavior while maintaining 10-bit resolution, 40 MSPS throughput, 3 V operation, compatible reference options, and equivalent digital timing. Generic cross-reference tools can generate candidates, but each result requires manual verification against both manufacturer datasheets before it can be approved for an existing PCB.

Engineering reference data for THS1040CPW — comparison, design guidance, and compliance information.

Selection Guide

Choose the THS1040CPW for a 28-TSSOP design requiring a 10-bit, 40 MSPS pipelined ADC with a 3 V supply and flexible single-ended or differential input. It is especially suitable when the original circuit has already been validated or when system documentation specifies the THS1040 clocking and reference configuration. Consider THS1041CPWRG4 or THS1041IPWRG4 only after checking their detailed pin, timing, reference, output, and temperature requirements against the existing board. The THS1041IPW and THS1041CPW are same-family candidates that may simplify sourcing, but they still require full electrical verification. No cross-brand replacement should be approved without demonstrating the same 28-TSSOP pin behavior, input range, reference method, 40 MSPS timing, and output coding.

Comparison with Alternatives

Parameter This Product THS1041CPWRG4 THS1041IPWRG4 THS1041IPW THS1041CPW
Package 28-TSSOP 28-TSSOP 28-TSSOP 28-TSSOP 28-TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Resolution 10 bit 10 bit 10 bit 10 bit 10 bit
Sampling Rate 40 MSPS 40 MSPS 40 MSPS 40 MSPS 40 MSPS
Supply Voltage 3 V 3 V 3 V 3 V 3 V

Key Differentiators

  • Established THS1040 device identity (vs THS1041CPWRG4)
  • Single-ended and differential input flexibility (vs THS1041IPWRG4)
  • Low-voltage CMOS operation (vs THS1041CPW)

Design Notes

Route the analog input and reference connections as short and quiet as practical, and keep the 40 MSPS clock and parallel data outputs away from those nets. Use the manufacturer's recommended application layout for bypass-capacitor locations and grounding. A continuous ground reference beneath the analog section is preferable to fragmented return paths, because output-code changes can couple directly into high-impedance input and reference nodes.

Treat clock quality as part of the analog signal chain. A 40 MSPS sampling rate does not guarantee accurate results if the clock has excessive jitter, and parallel output timing must also be checked against the receiving logic. Use short, properly terminated clock routes, avoid unnecessary stubs, and verify source voltage levels and setup timing against the converter specifications. Differential clock routing may be appropriate if that interface is used, but the exact requirements must come from the manufacturer datasheet.

Provide the specified local supply and reference bypassing directly at the appropriate device pins, following the values and placement shown in the manufacturer application schematic. The 3 V CMOS architecture can be sensitive to reference instability because the reference voltage establishes the conversion scale. Check supply sequencing, allowable ripple, and power-up behavior before enabling the clock, and ensure downstream logic does not inject current spikes through shared supply paths.

Do not assume that two converters with the same resolution, sampling rate, and package are automatically interchangeable. Before substituting a THS1041-family device, compare pin names, analog input range, reference voltage, clock polarity, output coding, conversion latency, timing, and power requirements. A footprint match is necessary for PCB reuse but does not by itself guarantee functional compatibility or identical system timing.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The verified product descriptions identify a CMOS ADC but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the device is not identified as an automotive-qualified component.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

THS1040CPW datasheet THS1040CPW pinout THS1040CPW datasheet pdf THS1040CPW equivalent THS1040CPW replacement THS1040CPW cross reference THS1040CPW vs THS1041CPWRG4 THS1040CPW footprint THS1040CPW spice model THS1040CPW price THS1040CPW stock Texas Instruments THS1040CPW THS1040 10 bit 40 MSPS ADC THS1040 28-TSSOP application circuit

Related Components & Terms

Texas Instruments THS1040CPW THS1040 THS1041CPWRG4 THS1041IPWRG4 THS1041IPW THS1041CPW THS1040CDW analog-to-digital converter ADC pipelined ADC data converter semiconductor CMOS 10-bit resolution 40 MSPS single-ended input differential input parallel output voltage reference 3 V power supply 28-TSSOP TSSOP package family surface-mount device SMD
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details