THS1040CPW - 10-Bit 40-MSPS Pipelined ADC | Texas Instruments
Артикул: THS1040CPW ✓ АктивенTHS1040CPW Обзор
An analog-to-digital converter, or ADC, converts an analog voltage into a numeric code for processing by digital equipment. The pipelined ADC architecture belongs to the broader semiconductor and data-converter hierarchy. Its multistage conversion process supports high sampling rates, while the 10-bit resolution provides 1,024 possible output codes. The THS1040 is positioned for compact systems that need high-speed sampling without the resolution of a 14-bit or 16-bit converter.
Key characteristics include a 40 MHz sampling rate, 10-bit resolution, single 3 V operation, and one analog input channel. The device accepts single-ended or differential signals, which allows it to interface with sensors, communications receivers, instrumentation, or signal-conditioning circuits. Parallel digital outputs support direct connection to digital logic, while selectable reference options help tailor the converter to different input ranges and system architectures.
The THS1040 uses a CMOS, low-power pipelined architecture. CMOS construction is suitable for low-voltage digital and mixed-signal systems, while the pipeline stages enable throughput suitable for repetitive waveform capture. At 40 MSPS, the converter can acquire 40 million samples each second. Exact input bandwidth, conversion latency, power consumption, output coding, and timing values should be confirmed in the manufacturer datasheet for the selected clock and reference configuration.
Typical uses include communications infrastructure, industrial measurement, data acquisition, radar or signal analysis, and embedded imaging systems. Differential input operation is especially useful when the source has low amplitude or the analog signal experiences common-mode interference. Single-ended operation can simplify systems where a balanced sensor interface is unnecessary. The 28-pin TSSOP package supports compact surface-mount PCB construction.
Designers should use the pin-description table and typical application circuit in the manufacturer datasheet when assigning traces, selecting bypass capacitors, and establishing the analog and digital return paths. Keep high-speed digital clock and output routing away from the analog input and reference networks, and provide a low-impedance return path to minimize code-dependent noise. This page combines the verified device description, sourcing information, practical design guidance, and drop-in replacement analysis for faster component evaluation.
Аналоги без доработки для THS1040CPW — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с THS1040CPW (тот же форм-фактор и посадочное место) — отличается по Package, Analog Supply Voltage, Architecture, Digital Supply Voltage, Input Type.
THS1041CPWRG4
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
THS1041IPWRG4
✅ Прямая заменаУточнить цену
Открыть даташит →THS1041IPWRG4
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →THS1041CPW
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →THS1040CPW Максимальные параметры и электрические характеристики
| Converter Type | Pipelined analog-to-digital converter |
| Разрешение | 10 bit |
| Частота дискретизации | 40 MSPS |
| Number of Channels | 1 channel |
| Напряжение питания | 3 V |
| Input Type | Single-ended or differential |
| Technology | CMOS |
| Power Class | Low-power ADC |
| Корпус | 28-TSSOP (0.173 inch, 4.40 mm width) |
| Тип монтажа | Surface mount |
| Output Interface | Parallel |
| Reference Selection | Multiple voltage-reference options |
| Analog Input Count | 1 input |
| Number of Output Codes | 1,024 codes |
| Maximum Sample Rate | 40 million samples per second |
Руководство по цоколевке THS1040CPW в корпусе 28-tssop (0.173 inch, 4.40 mm width)
Цоколевка для THS1040CPW (корпус 28-tssop (0.173 inch, 4.40 mm width)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для THS1040CPW.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
THS1040CPW подходит для 6 применениеs: Communications Receiver Digitization, Industrial Data Acquisition, Waveform and Signal Analysis, Sensor Signal Conditioning, Imaging and Video Sampling, Test and Measurement Equipment.
Communications Receiver Digitization
The THS1040CPW fits receiver front ends that require rapid conversion of intermediate-frequency or demodulated analog signals into parallel digital data. Its 10-bit resolution produces 1,024 codes, while the 40 MSPS pipelined architecture supports acquisition of 40 million samples per second. Differential input operation can simplify connection to balanced mixer or transceiver outputs and improve rejection of common-mode noise. The single 3 V supply also reduces the number of rails required around the converter. The primary design check is that the source bandwidth, clock jitter, and acquisition timing remain suitable for the modulation bandwidth. Use the manufacturer application information to determine input range and reference settings, and keep parallel output routing away from the analog input.
Рекомендуется
Industrial Data Acquisition
The THS1040CPW is suitable for compact industrial acquisition modules that sample waveforms or sensor outputs at tens of millions of samples per second. Its 10-bit resolution is appropriate for monitoring and control tasks where 1,024 digital levels provide adequate measurement detail, while the 40 MSPS pipeline throughput supports transient capture. Differential input can serve active transducers or balanced signal-conditioning stages, and single-ended input provides a simpler path for lower-level source circuits. Because the converter operates from 3 V, it can share a local rail with compatible digital logic. Confirm the industrial temperature grade, input bandwidth, clock-jitter sensitivity, and calibration requirements in the manufacturer datasheet before production deployment.
Рекомендуется
Waveform and Signal Analysis
The THS1040CPW can serve as the sampling front end in compact waveform analyzers and bench instrumentation. A 40 MSPS rate captures substantially more temporal detail than a kilohertz-class measurement system, allowing short-duration events to be represented digitally, while the 10-bit result provides 1,024 quantization levels for amplitude analysis. The parallel output supports direct handoff to FPGA or digital processing logic when deterministic timing is important. Differential analog connections can reduce interference in laboratory environments, and the 28-TSSOP package helps maintain a compact board footprint. Designers should evaluate input bandwidth, aliasing, reference stability, clock quality, and acquisition latency using the datasheet timing and application information.
Рекомендуется
Sensor Signal Conditioning
The THS1040CPW is useful in high-speed sensor interfaces where the analog output must be digitized for filtering, storage, or machine interpretation. Its support for single-ended and differential inputs allows selection according to the sensor architecture: a grounded sensor may use the simpler single-ended route, while a balanced bridge or differential amplifier may connect directly. At 40 MSPS, the converter can preserve time-dependent features in vibration, position, or imaging signals, subject to adequate source bandwidth and clock performance. The 3 V CMOS architecture supports integration with low-voltage digital sections. Keep sensor traces short, provide stable reference bypassing, and follow the recommended analog grounding scheme to prevent quantization-sensitive noise from appearing in the converted data.
Рекомендуется
Imaging and Video Sampling
The THS1040CPW can form the conversion stage of compact imaging or video-processing systems requiring 10-bit sample resolution at 40 MSPS. Parallel outputs provide a straightforward interface to digital image-processing logic, and the single 3 V operation is useful in space-constrained boards. Differential input is valuable when pixel-array or sensor outputs are internally balanced, helping preserve signal integrity over cable or board-trace distances. The effective spatial or temporal performance still depends on the sensor output bandwidth, clocking strategy, reference accuracy, and subsequent digital filtering. Confirm the converter's input range and clock timing against the sensor interface, and isolate analog and digital return currents to avoid correlated errors in the digitized image data.
Рекомендуется
Test and Measurement Equipment
The THS1040CPW is appropriate for portable or rack-mounted test equipment that samples waveforms at a higher rate than conventional low-speed measurement converters. The 40 MSPS pipelined throughput supports transient and repetitive-signal capture, and the 10-bit output gives 1,024 digital levels for display or analysis. A differential input connection can improve noise immunity in multi-board systems, while the parallel output can feed an FPGA for filtering or triggering. The 28-TSSOP package requires careful attention to lead spacing and thermal management but supports conventional surface-mount assembly. Designers should base bandwidth, input impedance, reference selection, and timing decisions on the manufacturer datasheet and validate clock-jitter performance across the intended operating-temperature range.
Рекомендуется
Справочные инженерные данные для THS1040CPW — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | THS1041CPWRG4 | THS1041IPWRG4 | THS1041IPW | THS1041CPW |
|---|---|---|---|---|---|
| Package | 28-TSSOP | 28-TSSOP | 28-TSSOP | 28-TSSOP | 28-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
| Sampling Rate | 40 MSPS | 40 MSPS | 40 MSPS | 40 MSPS | 40 MSPS |
| Supply Voltage | 3 V | 3 V | 3 V | 3 V | 3 V |
Ключевые отличия
- Established THS1040 device identity (против THS1041CPWRG4)
- Single-ended and differential input flexibility (против THS1041IPWRG4)
- Low-voltage CMOS operation (против THS1041CPW)
Заметки по проектированию
Route the analog input and reference connections as short and quiet as practical, and keep the 40 MSPS clock and parallel data outputs away from those nets. Use the manufacturer's recommended application layout for bypass-capacitor locations and grounding. A continuous ground reference beneath the analog section is preferable to fragmented return paths, because output-code changes can couple directly into high-impedance input and reference nodes.
Treat clock quality as part of the analog signal chain. A 40 MSPS sampling rate does not guarantee accurate results if the clock has excessive jitter, and parallel output timing must also be checked against the receiving logic. Use short, properly terminated clock routes, avoid unnecessary stubs, and verify source voltage levels and setup timing against the converter specifications. Differential clock routing may be appropriate if that interface is used, but the exact requirements must come from the manufacturer datasheet.
Provide the specified local supply and reference bypassing directly at the appropriate device pins, following the values and placement shown in the manufacturer application schematic. The 3 V CMOS architecture can be sensitive to reference instability because the reference voltage establishes the conversion scale. Check supply sequencing, allowable ripple, and power-up behavior before enabling the clock, and ensure downstream logic does not inject current spikes through shared supply paths.
Do not assume that two converters with the same resolution, sampling rate, and package are automatically interchangeable. Before substituting a THS1041-family device, compare pin names, analog input range, reference voltage, clock polarity, output coding, conversion latency, timing, and power requirements. A footprint match is necessary for PCB reuse but does not by itself guarantee functional compatibility or identical system timing.
Информация о соответствии
The verified product descriptions identify a CMOS ADC but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the device is not identified as an automotive-qualified component.