Texas Instruments

TLV2244ID - Quad 12V Micropower Op Amp | Texas Instruments

MPN: TLV2244ID ✓ Active
2.5 V to 12 V Vdss Approximately 1 uA Id 14-pin SOIC (D) Package
MOQ: 1 |

TLV2244ID Overview

The Texas Instruments TLV2244ID is a four-circuit, rail-to-rail input and output operational amplifier optimized for low-power analog signal conditioning. It operates from 2.5 V to 12 V, delivers a gain-bandwidth product of 5.5 kHz, and draws approximately 1 uA per channel. The device is packaged in a 14-pin SOIC (D) package for industrial and general-purpose surface-mount designs.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs while providing high input impedance and low output impedance. Operational amplifiers form the foundation of the amplifier IC hierarchy and support functions such as buffering, sensing, filtering, instrumentation, feedback control, and signal conditioning. The TLV2244 combines four amplifier channels in one package, reducing board area compared with four separate single-channel devices.

The TLV2244ID provides rail-to-rail input and output operation, allowing signals to use most of the available supply-voltage range without requiring conventional mid-supply biasing. Its low supply current of approximately 1 uA per channel is valuable in battery-powered equipment, while the 5.5 kHz gain-bandwidth product is appropriate for low-frequency precision and measurement circuits rather than high-speed signal processing.

Because the gain bandwidth is modest, stable operation depends on selecting feedback components and compensation appropriate for the intended closed-loop bandwidth. The amplifier can be used with resistive feedback networks, and applications requiring precision offset or drift performance should verify those limits against the manufacturer datasheet before production release. Rail-to-rail behavior also requires attention because input and output stages approach the supply rails through different structures.

Typical uses include low-frequency sensor conditioning, portable instrumentation, battery-powered monitoring, current-voltage signal interfaces, active filters, and four-channel measurement systems. In each case, the low channel current supports power-constrained operation, while the quad configuration reduces the component count when four independent amplifier functions are required.

For PCB implementation, keep input and feedback paths short, provide a stable supply connection, and place input biasing or decoupling components close to their associated pins. Verify stability with the actual source impedance, load, output capacitance, and gain configuration. Use the manufacturer pin-description table when assigning PCB tracks because the complete pin map is not reproduced on this page.

This product page combines the official device description, package and low-power characteristics, application-focused engineering guidance, and a selection framework for engineers evaluating the TLV2244ID against other micropower operational amplifiers.

Drop-in alternatives for TLV2244ID — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

TLV2264IP

✅ Drop-In ⚠️ Specs Unverified
📦 14-SOIC
Same 14-SOIC quad-amplifier format; rail-to-rail input/output ratings differ from the TLV2244 and require comparison against the circuit limits

📋 Reference alternative (not in catalog)

TLV2274IP

✅ Drop-In ⚠️ Specs Unverified
📦 14-SOIC
Same 14-SOIC quad-amplifier format; input common-mode behavior differs from the TLV2244's rail-to-rail input specification

📋 Reference alternative (not in catalog)

TLV2474IP

✅ Drop-In ⚠️ Specs Unverified
📦 14-SOIC
Same 14-SOIC quad-amplifier format; precision, bandwidth, and common-mode ratings differ from the TLV2244

📋 Reference alternative (not in catalog)

TLV2464IP

✅ Drop-In ⚠️ Specs Unverified
📦 14-SOIC
Same 14-SOIC quad-amplifier format; higher-speed precision-family characteristics differ from the TLV2244's 5.5 kHz gain-bandwidth product

📋 Reference alternative (not in catalog)

TLV2244ID Maximum Ratings & Electrical Characteristics

Amplifier Type Quad general-purpose operational amplifier
Number of Channels 4 channels
Supply Voltage Range 2.5 V to 12 V
Maximum Supply Voltage 12 V
Supply Current per Channel Approximately 1 uA
Gain-Bandwidth Product 5.5 kHz
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Power-Supply Configuration Single supply
Package 14-pin SOIC (D)
Mounting Type Surface mount

TLV2244ID 14-pin soic (d) Pin Configuration Guide

Pin configuration for TLV2244ID (14-pin soic (d) package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

14-pin soic (d) package pinout diagram for TLV2244ID

No detailed pinout data available for TLV2244ID.

Refer to the datasheet for full pin configuration.

Typical Applications

TLV2244ID is suitable for 6 applications: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Process Measurement, Low-Power Active Filtering, IoT Sensor Interface, Precision Control Loop.

🔋

Battery-Powered Sensor Conditioning

The TLV2244ID fits low-power sensor interfaces because four channels are available at approximately 1 uA supply current per channel. Each amplifier can condition a low-frequency sensor output while operating from a 2.5 V to 12 V source. Rail-to-rail input and output operation helps use the available signal range in compact battery-powered instruments. The 5.5 kHz gain-bandwidth product is suitable for slow sensor signals, but the final gain must preserve closed-loop stability and reject out-of-band noise.

💊

Portable Medical Monitoring

The TLV2244ID is appropriate for multichannel, low-frequency medical monitoring when the system emphasizes low power and compactness. Four rail-to-rail amplifier channels can process buffered sensor or electrode-related signals from one 14-pin SOIC package. The approximately 1 uA per-channel supply current helps limit the amplifier's contribution to overall portable-system power. Because medical designs may require specific accuracy, noise, isolation, and qualification controls, engineers must verify those limits against the manufacturer datasheet and applicable product requirements before use.

🏭

Industrial Process Measurement

The TLV2244ID can support low-bandwidth process measurement circuits that require several conditioned inputs but operate from limited power budgets. Its four amplifier channels reduce PCB area in transmitter, controller, and data-acquisition modules, while the 2.5 V to 12 V range permits use with low-voltage industrial rails. The 5.5 kHz gain-bandwidth product suits slow pressure, temperature, and level signals rather than fast transient waveforms. Input filtering and isolation requirements should be designed separately for each industrial measurement channel.

🎧

Low-Power Active Filtering

The TLV2244ID is suitable for low-frequency active filters where four amplifier channels can implement repeated first or second-order stages. The 5.5 kHz gain-bandwidth product provides useful bandwidth for slow control, audio-adjacent, or instrumentation signals, while approximately 1 uA per channel favors portable equipment. Component tolerances and the amplifier's frequency-response limits must be included in filter-error analysis. Confirm closed-loop stability for each gain setting and the intended loading before releasing the filter design.

🧩

IoT Sensor Interface

The TLV2244ID can condition several low-speed inputs in an IoT sensor node while preserving system energy budget. Its four rail-to-rail channels are useful for resistive dividers, current-sense outputs, and analog sensor signals operating from a 2.5 V to 12 V rail. The low approximately 1 uA per-channel supply current is beneficial when the node spends long periods in a low-power state. Choose resistor values, filtering, and shutdown architecture around the sensor's bandwidth and the node's required measurement accuracy.

🔧

Precision Control Loop

The TLV2244ID is appropriate for slow feedback-control and set-point conditioning functions requiring more than one amplifier channel. Its low supply current benefits distributed or battery-powered control hardware, and rail-to-rail output behavior supports signal swings near the available supply range. The modest 5.5 kHz gain-bandwidth product suits control loops with bandwidth well below that value. Validate loop stability, offset contribution, startup behavior, and the effects of output loading in the complete analog system.

What is the TLV2244ID?
The TLV2244ID is a four-channel, rail-to-rail input/output operational amplifier from Texas Instruments. According to the manufacturer product page, it is a micropower device intended for low-voltage signal-conditioning systems and is offered in a 14-pin SOIC package. Its four integrated channels allow one package to replace four separate single operational amplifiers when board area is important.
What are the key specifications of TLV2244ID that engineers should know?
The TLV2244ID combines four operational-amplifier channels, a 2.5 V to 12 V supply range, approximately 1 uA supply current per channel, and a 5.5 kHz gain-bandwidth product in a 14-pin SOIC. According to the Texas Instruments product description, it supports single-supply operation with rail-to-rail input and output behavior, making it appropriate for low-frequency, low-power analog signal conditioning.
Where can I download the TLV2244ID datasheet PDF?
The official TLV2244 datasheet and product resources are available from Texas Instruments at the TLV2244 product page on ti.com. The verified search results also identify a TLV2244ID PDF hosted by DiGi-Electronics. Use the manufacturer page as the primary source for ordering information, pin descriptions, electrical characteristics, and application guidance, and consult the PDF for the complete device details.
Where can I find the TLV2244ID pinout?
Use the pin-description table and package drawing in the Texas Instruments TLV2244 manufacturer datasheet to locate every TLV2244ID connection. The verified product listing confirms the 14-pin SOIC (D) package, but it does not provide a complete numbered pin map. Verify the package drawing and pin table before routing the PCB so power, input, output, and no-connect assignments match the exact ordering code.
Is the TLV2244ID suitable for battery-powered applications?
Yes, the TLV2244ID is well suited to battery-powered and other low-power analog systems because it consumes approximately 1 uA per channel. Its 2.5 V minimum supply voltage also supports low-voltage operation. Actual battery life depends on the complete circuit, including sensor current, pull-up networks, duty cycle, regulator efficiency, and the number of active channels.
TLV2244ID vs TLV2242ID: which is better for a four-channel design?
Choose the TLV2244ID for a four-channel design because it integrates four amplifier circuits in a 14-pin SOIC, while the TLV2242ID is intended for two-channel signal paths. The TLV2244ID also preserves the family's micropower, rail-to-rail, and 5.5 kHz characteristics. Confirm the exact pinout and unused-channel handling in the manufacturer documentation before making a direct schematic substitution.
What is the difference between TLV2244ID and other rail-to-rail op amps?
The principal difference is the combination of four channels, approximately 1 uA per channel, a 2.5 V to 12 V supply range, and a 5.5 kHz gain-bandwidth product. Faster amplifier families may offer greater bandwidth but usually consume more current. Compare input offset, noise, output drive, stability with capacitive loads, and package pinout alongside power consumption before selecting a replacement.
When should I choose TLV2244ID over a higher-bandwidth operational amplifier?
Choose the TLV2244ID when the signal bandwidth is low, power consumption is important, and rail-to-rail single-supply operation provides a useful advantage. Its 5.5 kHz gain-bandwidth product is not appropriate for high-speed waveform or wideband filtering requirements. A higher-bandwidth amplifier is preferable when rise time, closed-loop bandwidth, or drive requirements exceed the micropower family's capability.
Is TLV2244ID suitable for sensor signal conditioning?
Yes, the TLV2244ID is suitable for many low-frequency sensor-conditioning stages because it provides rail-to-rail input and output operation, low supply current, and four channels in one package. The 5.5 kHz gain-bandwidth product supports low-frequency amplification, but sensor bandwidth, source impedance, offset requirements, and noise must be checked before selecting the gain and filter values.
What can replace TLV2244ID?
A true replacement must match the 14-pin SOIC footprint, preserve pin-to-pin assignments, accept the same 2.5 V to 12 V supply range, and provide comparable rail-to-rail operation. The available cross-reference results do not identify a specific qualified drop-in part. Use the Texas Instruments cross-reference search to locate candidates, then validate offset, bandwidth, output drive, stability, and temperature grade before approving a substitution.
What is the best cross-brand equivalent for TLV2244ID?
No specific cross-brand drop-in equivalent is established by the available component listings and cross-reference results. A candidate must use the same 14-pin SOIC pinout and remain within approximately 30% of the target's key electrical ratings. Search manufacturer cross-reference databases by exact MPN, then validate rail-to-rail behavior, 5.5 kHz-class bandwidth, low current, output drive, and package pin assignments on the bench.
Where can I buy TLV2244ID online?
Use the Request a Quote form on this page to request current availability, lead time, and commercial terms for TLV2244ID. The verified listings identify the part from Texas Instruments in a 14-pin SOIC package, but they do not provide a quantity-and-price table suitable for direct copying into this page. Confirm the exact ordering code and package before submitting the request.
What is the price of TLV2244ID?
Current commercial pricing for TLV2244ID should be requested through the Request a Quote form on this page. The verified product listings do not show explicit quantity-break prices for the exact ordering code, so no price figure is reproduced here. A quote request can also confirm stock, minimum order quantity, lead time, and the shipping format required for your production build.
What is the lead time for TLV2244ID?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with inventory, order quantity, and the chosen shipment format, and the verified listings do not establish a universal production interval. Include your required quantity and target assembly date in the request so the supplier can confirm the most relevant schedule.
Is TLV2244ID in stock?
Stock status for TLV2244ID should be confirmed through the Request a Quote form on this page. Some verified listings mention availability, but listing-level stock indicators can change and do not establish a guaranteed allocation for your order quantity. State the required quantity, package form, and delivery date in the quote request to obtain a current supply confirmation.

Engineering reference data for TLV2244ID — comparison, design guidance, and compliance information.

Selection Guide

Choose the TLV2244ID when the design needs four low-frequency amplifier channels, a 2.5 V to 12 V supply, rail-to-rail input and output behavior, and approximately 1 uA per channel. It is particularly useful in portable monitoring, low-power sensor interfaces, slow process measurement, and compact active-filter circuits. Do not select it for high-speed waveform, wideband filtering, or high-output-drive applications that exceed the 5.5 kHz gain-bandwidth product. A single-channel device may be preferable when only one signal must be conditioned, while a higher-bandwidth amplifier is preferable when rise-time or closed-loop bandwidth dominates. For any proposed replacement, verify the 14-pin SOIC footprint, pin-to-pin assignments, supply range, input and output ranges, output drive, stability, temperature grade, and lifecycle status rather than relying only on the amplifier type and package.

Comparison with Alternatives

Parameter This Product
Brand Texas Instruments
Package 14-pin SOIC (D)
Number of Channels 4 channels
Supply Voltage Range 2.5 V to 12 V
Supply Current per Channel Approximately 1 uA
Gain-Bandwidth Product 5.5 kHz
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail

Key Differentiators

  • Four amplifier channels in one package (vs Single-channel TLV2241-family device)
  • Micropower operation for portable systems (vs Typical general-purpose 14-pin SOIC operational amplifier)
  • Rail-to-rail input and output operation (vs Non-rail-to-rail low-power operational amplifier)

Design Notes

Route each input and feedback connection directly to its associated amplifier pin, and place any biasing or compensation network close to the relevant input. Keep the feedback loop compact because the 5.5 kHz gain-bandwidth product limits high-frequency loop shaping. Connect the supply and ground pins with short paths and use a local bypass capacitor where the board design requires additional high-frequency decoupling.

Verify stability with the actual signal-source impedance, gain, load, and output capacitance. A rail-to-rail amplifier can approach its supply rails through different internal paths, so input and output common-mode ranges must be checked independently at the operating supply voltage. For low-frequency precision signals, evaluate offset, bias current, and drift against the required error budget rather than relying only on gain-bandwidth product.

Estimated total amplifier supply current is approximately 4 uA when all four channels operate at the typical 1 uA per-channel current. This estimate uses the manufacturer's approximately 1 uA per-channel value and does not include external resistor currents, sensor loads, regulator losses, or leakage. Compare the complete circuit's average and peak current against the available supply, especially in battery-operated designs.

Do not treat the low gain-bandwidth product as suitable for high-speed signal amplification, and do not assume every rail-to-rail amplifier has identical input and output limits. Use the manufacturer pin-description table when assigning the 14-pin SOIC connections, and use the ordering-information table to confirm that the mechanical package matches the PCB footprint. Validate unused channels according to the recommended configuration in the datasheet.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this ordering code.

Data verified on: 2026-11-10 — data verified and curated by XAIPART's component engineering team

Related Searches

TLV2244ID TLV2244ID datasheet TLV2244ID datasheet pdf TLV2244ID pinout TLV2244ID equivalent TLV2244ID replacement TLV2244ID cross reference TLV2244ID price TLV2244ID stock Texas Instruments TLV2244ID TLV2244ID 5.5 kHz TLV2244 14-SOIC pinout TLV2244 low power sensor TLV2244ID application circuit

Related Components & Terms

Texas Instruments TLV2244 TLV2244ID operational amplifier amplifier IC quad amplifier micropower amplifier rail-to-rail input rail-to-rail output single-supply amplifier gain-bandwidth product supply current per channel signal conditioning active filter sensor interface battery-powered electronics SOIC-14 SOIC package surface mount analog integrated circuit feedback control industrial process measurement portable medical monitoring IoT sensor interface
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details