TLV2244ID - Quad 12V Micropower Op Amp | Texas Instruments
MPN: TLV2244ID ✓ פעילTLV2244ID סקירה
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs while providing high input impedance and low output impedance. Operational amplifiers form the foundation of the amplifier IC hierarchy and support functions such as buffering, sensing, filtering, instrumentation, feedback control, and signal conditioning. The TLV2244 combines four amplifier channels in one package, reducing board area compared with four separate single-channel devices.
The TLV2244ID provides rail-to-rail input and output operation, allowing signals to use most of the available supply-voltage range without requiring conventional mid-supply biasing. Its low supply current of approximately 1 uA per channel is valuable in battery-powered equipment, while the 5.5 kHz gain-bandwidth product is appropriate for low-frequency precision and measurement circuits rather than high-speed signal processing.
Because the gain bandwidth is modest, stable operation depends on selecting feedback components and compensation appropriate for the intended closed-loop bandwidth. The amplifier can be used with resistive feedback networks, and applications requiring precision offset or drift performance should verify those limits against the manufacturer datasheet before production release. Rail-to-rail behavior also requires attention because input and output stages approach the supply rails through different structures.
Typical uses include low-frequency sensor conditioning, portable instrumentation, battery-powered monitoring, current-voltage signal interfaces, active filters, and four-channel measurement systems. In each case, the low channel current supports power-constrained operation, while the quad configuration reduces the component count when four independent amplifier functions are required.
For PCB implementation, keep input and feedback paths short, provide a stable supply connection, and place input biasing or decoupling components close to their associated pins. Verify stability with the actual source impedance, load, output capacitance, and gain configuration. Use the manufacturer pin-description table when assigning PCB tracks because the complete pin map is not reproduced on this page.
This product page combines the official device description, package and low-power characteristics, application-focused engineering guidance, and a selection framework for engineers evaluating the TLV2244ID against other micropower operational amplifiers.
חלופות תחליף ישיר עבור TLV2244ID — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
TLV2264IP
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
TLV2274IP
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
TLV2474IP
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
TLV2464IP
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
TLV2244ID דירוגים מרביים ומאפיינים חשמליים
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Channels | 4 channels |
| Supply Voltage Range | 2.5 V to 12 V |
| Maximum Supply Voltage | 12 V |
| Supply Current per Channel | Approximately 1 uA |
| Gain-Bandwidth Product | 5.5 kHz |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Power-Supply Configuration | Single supply |
| מארז | 14-pin SOIC (D) |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של TLV2244ID 14-pin soic (d)
תצורת פינים עבור TLV2244ID (מארזת 14-pin soic (d)). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור TLV2244ID.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TLV2244ID מתאים עבור 6 יישוםs: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Process Measurement, Low-Power Active Filtering, IoT Sensor Interface, Precision Control Loop.
Battery-Powered Sensor Conditioning
The TLV2244ID fits low-power sensor interfaces because four channels are available at approximately 1 uA supply current per channel. Each amplifier can condition a low-frequency sensor output while operating from a 2.5 V to 12 V source. Rail-to-rail input and output operation helps use the available signal range in compact battery-powered instruments. The 5.5 kHz gain-bandwidth product is suitable for slow sensor signals, but the final gain must preserve closed-loop stability and reject out-of-band noise.
מומלץ
Portable Medical Monitoring
The TLV2244ID is appropriate for multichannel, low-frequency medical monitoring when the system emphasizes low power and compactness. Four rail-to-rail amplifier channels can process buffered sensor or electrode-related signals from one 14-pin SOIC package. The approximately 1 uA per-channel supply current helps limit the amplifier's contribution to overall portable-system power. Because medical designs may require specific accuracy, noise, isolation, and qualification controls, engineers must verify those limits against the manufacturer datasheet and applicable product requirements before use.
מומלץ
Industrial Process Measurement
The TLV2244ID can support low-bandwidth process measurement circuits that require several conditioned inputs but operate from limited power budgets. Its four amplifier channels reduce PCB area in transmitter, controller, and data-acquisition modules, while the 2.5 V to 12 V range permits use with low-voltage industrial rails. The 5.5 kHz gain-bandwidth product suits slow pressure, temperature, and level signals rather than fast transient waveforms. Input filtering and isolation requirements should be designed separately for each industrial measurement channel.
מומלץ
Low-Power Active Filtering
The TLV2244ID is suitable for low-frequency active filters where four amplifier channels can implement repeated first or second-order stages. The 5.5 kHz gain-bandwidth product provides useful bandwidth for slow control, audio-adjacent, or instrumentation signals, while approximately 1 uA per channel favors portable equipment. Component tolerances and the amplifier's frequency-response limits must be included in filter-error analysis. Confirm closed-loop stability for each gain setting and the intended loading before releasing the filter design.
מומלץ
IoT Sensor Interface
The TLV2244ID can condition several low-speed inputs in an IoT sensor node while preserving system energy budget. Its four rail-to-rail channels are useful for resistive dividers, current-sense outputs, and analog sensor signals operating from a 2.5 V to 12 V rail. The low approximately 1 uA per-channel supply current is beneficial when the node spends long periods in a low-power state. Choose resistor values, filtering, and shutdown architecture around the sensor's bandwidth and the node's required measurement accuracy.
מומלץ
Precision Control Loop
The TLV2244ID is appropriate for slow feedback-control and set-point conditioning functions requiring more than one amplifier channel. Its low supply current benefits distributed or battery-powered control hardware, and rail-to-rail output behavior supports signal swings near the available supply range. The modest 5.5 kHz gain-bandwidth product suits control loops with bandwidth well below that value. Validate loop stability, offset contribution, startup behavior, and the effects of output loading in the complete analog system.
מומלץ
נתוני עזר הנדסיים עבור TLV2244ID — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Brand | Texas Instruments |
| Package | 14-pin SOIC (D) |
| Number of Channels | 4 channels |
| Supply Voltage Range | 2.5 V to 12 V |
| Supply Current per Channel | Approximately 1 uA |
| Gain-Bandwidth Product | 5.5 kHz |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
מבדילים עיקריים
- Four amplifier channels in one package (לעומתSingle-channel TLV2241-family device)
- Micropower operation for portable systems (לעומתTypical general-purpose 14-pin SOIC operational amplifier)
- Rail-to-rail input and output operation (לעומתNon-rail-to-rail low-power operational amplifier)
הערות תכנון
Route each input and feedback connection directly to its associated amplifier pin, and place any biasing or compensation network close to the relevant input. Keep the feedback loop compact because the 5.5 kHz gain-bandwidth product limits high-frequency loop shaping. Connect the supply and ground pins with short paths and use a local bypass capacitor where the board design requires additional high-frequency decoupling.
Verify stability with the actual signal-source impedance, gain, load, and output capacitance. A rail-to-rail amplifier can approach its supply rails through different internal paths, so input and output common-mode ranges must be checked independently at the operating supply voltage. For low-frequency precision signals, evaluate offset, bias current, and drift against the required error budget rather than relying only on gain-bandwidth product.
Estimated total amplifier supply current is approximately 4 uA when all four channels operate at the typical 1 uA per-channel current. This estimate uses the manufacturer's approximately 1 uA per-channel value and does not include external resistor currents, sensor loads, regulator losses, or leakage. Compare the complete circuit's average and peak current against the available supply, especially in battery-operated designs.
Do not treat the low gain-bandwidth product as suitable for high-speed signal amplification, and do not assume every rail-to-rail amplifier has identical input and output limits. Use the manufacturer pin-description table when assigning the 14-pin SOIC connections, and use the ordering-information table to confirm that the mechanical package matches the PCB footprint. Validate unused channels according to the recommended configuration in the datasheet.
מידע על תאימות
The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this ordering code.