TLV2763IN - Dual 1.8V Micropower RRIO Op Amp | TI
MPN: TLV2763IN ✓ ActiveTLV2763IN Overview
A rail-to-rail-input and rail-to-rail-output operational amplifier, commonly described as a RRIO amplifier, can accept input signals near the positive and negative supply rails while driving loads toward those limits. This makes the TLV2763IN useful when the usable input range must extend beyond conventional common-mode limits. As a dual amplifier in a 14-pin PDIP, it can implement two independent gain or buffer stages while simplifying through-hole prototype construction.
Key characteristics include 1.8 V single-supply operation, dual-channel operation, 500 kHz typical gain-bandwidth product, 20 µA typical supply current per channel, and 10.2 mA typical output current. Shutdown support is particularly useful for battery-powered instrumentation because the amplifiers can be disabled when signal-chain activity is not required, reducing system power consumption.
The TLV2763IN belongs to the operational-amplifier hierarchy, where it combines low input and output swing limits, low quiescent current, and moderate bandwidth. Its rail-to-rail behavior makes it appropriate for sensor interfaces, portable measurement systems, battery monitoring, and low-voltage analog signal chains. The shutdown function also supports duty-cycled acquisition circuits where preserving standby power is important.
Typical applications include portable sensor conditioning, low-voltage data acquisition, current-loop signal processing, audio preamplification, and general-purpose dual-stage amplification. Its 500 kHz bandwidth is appropriate for low-frequency and moderate-bandwidth instrumentation rather than high-speed video or RF signal paths. The 10.2 mA typical output-current capability is sufficient for buffer and low-load drive applications.
When designing around the TLV2763IN, account for the dropout region, output-capacitance stability requirements, input bias-current effects, and the shutdown logic level. Place input and output compensation components close to the relevant pins and avoid excessive capacitive loading at the output. Use the manufacturer datasheet pin-description table and typical application circuits to confirm external component values and logic thresholds before production release.
This page combines the manufacturer operating characteristics, package information, application guidance, and engineering-focused replacement analysis for the TLV2763IN. It also identifies the critical distinctions between genuine same-footprint alternatives and devices that are only functionally similar, helping engineers make a board-level decision without relying on incomplete catalog descriptions.
Drop-in alternatives for TLV2763IN — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with TLV2763IN (same form factor and footprint) — differing in Amplifier Type, Gain-Bandwidth Product, Package, Supply Current.
TLV2762IN
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
TLV2764IN
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →TLV2763IN Maximum Ratings & Electrical Characteristics
| Amplifier Type | Dual operational amplifier |
| Number of Circuits | 2 circuits |
| Supply Voltage Range | 1.8 V minimum single supply |
| Supply Type | Single supply |
| Rail-to-Rail Input | Yes |
| Rail-to-Rail Output | Yes |
| Gain-Bandwidth Product | 500 kHz typical |
| Supply Current | 20 µA typical per channel |
| Output Current | 10.2 mA typical |
| Shutdown Function | Yes |
| Operating Temperature Range | -40 °C to +85 °C |
| Package | 14-pin PDIP |
| Package Pitch | 7.62 mm |
| Mounting Type | Through-hole |
| Product Type | Standard general-purpose amplifier |
TLV2763IN 7.62 mm Pin Configuration Guide
Pin configuration for TLV2763IN (7.62 mm package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for TLV2763IN.
Refer to the datasheet for full pin configuration.
Typical Applications
TLV2763IN is suitable for 6 applications: Battery-Powered Sensor Conditioning, Portable Data Acquisition, Current-Loop Signal Conditioning, Low-Voltage Audio Preamplification, Battery Monitoring, Low-Power IoT Signal Conditioning.
Battery-Powered Sensor Conditioning
The TLV2763IN fits low-power sensor interfaces because each channel typically consumes 20 µA and the family supports 1.8 V single-supply operation. Its rail-to-rail inputs preserve signal range close to the supply limits, while rail-to-rail outputs improve drive into the next low-voltage stage. Two channels can condition a sensor and its reference or provide gain and buffering without a separate dual package. The 500 kHz typical bandwidth is more than adequate for temperature, pressure, and slow chemical-sensor waveforms. Shutdown can reduce consumption during inactive measurement intervals, although the external sensor and reference loads must also be placed in a controlled off state.
Recommended
Portable Data Acquisition
The TLV2763IN is useful in portable measurement systems where two analog channels must operate from a compact 1.8 V supply. A typical arrangement uses one amplifier for gain and another for active filtering or input buffering. Its 500 kHz gain-bandwidth product supports moderate-frequency sensor acquisition while the 20 µA per-channel supply current limits power demand. Rail-to-rail input and output stages increase the usable signal span in systems whose analog front end operates near the supply rails. The shutdown function supports duty-cycled acquisition, while the through-hole 14-pin PDIP package simplifies prototype assembly and bench validation.
Recommended
Current-Loop Signal Conditioning
The TLV2763IN can amplify the voltage produced by a low-side current-shunt or current-loop transmitter in a 1.8 V industrial or laboratory system. Its dual-channel arrangement permits separate gain stages for signal and reference channels, while rail-to-rail inputs accommodate sensor voltages near either supply rail. The 500 kHz typical bandwidth is suitable for many process-control signals and sensor dynamics, and the typical 10.2 mA output-current capability is appropriate for high-impedance downstream circuitry. Design the shunt, input filtering, and output loading so the amplifier remains stable with the complete sensor network and any cable capacitance.
Recommended
Low-Voltage Audio Preamplification
The TLV2763IN can serve as a dual low-voltage audio preamplifier in portable equipment, microphone interface, or line-level conditioning stage. Rail-to-rail input and output operation allows the circuit to work with signals close to the 1.8 V supply, while the dual configuration can process left and right channels independently. The 500 kHz typical gain-bandwidth product covers the audio band with substantial bandwidth margin, and the typical 10.2 mA output-current capability suits normal low-impedance preamplifier loads. Shutdown is useful for battery-operated audio products, but the external microphone bias, gain-setting network, and output coupling must be designed around the amplifier's input and output behavior.
Recommended
Battery Monitoring
The TLV2763IN is appropriate for monitoring a low-voltage battery or energy-storage node when the measurement circuit must operate near 1.8 V. One channel can buffer a scaled battery voltage while the other handles a current-sense signal or reference, reducing the need for separate amplifiers. Rail-to-rail inputs improve measurement utilization, and the 20 µA typical supply current per channel helps preserve standby energy. The 500 kHz bandwidth is suitable for slow voltage trends and filtered current measurements rather than high-dV/dt protection systems. Accurate results still require a suitably scaled divider or shunt, input filtering appropriate for the source impedance, and calibration across temperature.
Recommended
Low-Power IoT Signal Conditioning
The TLV2763IN supports IoT sensor nodes that translate low-level analog inputs into a signal suitable for sampling or comparison. Its 1.8 V operation, rail-to-rail inputs, and 20 µA per-channel supply current are useful in compact battery-powered devices, while two integrated channels can handle a sensor signal and a buffered threshold or reference. The 500 kHz typical bandwidth is suitable for many low-rate environmental sensors and avoids the power and interference burden of a much faster amplifier. Shutdown allows duty-cycled operation between measurement intervals. Layout should minimize leakage around high-impedance inputs, and the output network should avoid excessive capacitance that could compromise stability.
Recommended
Recommended Products Summary
Engineering reference data for TLV2763IN — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | TLV2762IN | TLV2764IN |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP |
| Amplifier Configuration | Dual | Dual | Dual |
| Minimum Supply Voltage | 1.8 V | 1.8 V | 1.8 V |
| Supply Type | Single supply | Single supply | Single supply |
| Rail-to-Rail Input | Yes | Yes | Yes |
| Rail-to-Rail Output | Yes | Yes | Yes |
Key Differentiators
- Provides a confirmed shutdown-equipped dual low-voltage configuration (vs TLV2762IN)
- Uses a practical 14-pin PDIP footprint for through-hole assembly (vs TLV2764IN)
- Balances 500 kHz bandwidth with micropower consumption (vs TLV2764IN)
Design Notes
Budget the dual amplifier at approximately 40 µA total from the stated 20 µA typical supply current per channel. This estimate excludes external divider, sensor, and shutdown-support loads. Because the circuit operates from as little as 1.8 V, verify that every downstream signal and the shutdown-control logic remain within valid input and output ranges. Confirm the actual operating voltage against the electrical-characteristics table before using the typical current figure for a battery-life calculation.
Use the 14-pin PDIP footprint and follow the counter-clockwise numbering shown by the package drawing. Keep feedback resistors, input filtering components, and decoupling capacitors close to their associated amplifier pins. Short supply and ground paths reduce voltage drops and susceptibility from surrounding switching circuitry. If the same PCB may also carry another dual amplifier, preserve adequate clearance between packages and verify pin 1 orientation after assembly.
Do not assume that every member of the TLV2763 family has identical shutdown behavior or logic levels. Confirm the enable-pin polarity, inactive-state output condition, compensation method, and stability requirements for the exact alternative MPN in the manufacturer datasheet. Also avoid connecting high-impedance sources without accounting for input bias-current error and leakage. Validate the complete circuit at the intended supply voltage and load rather than relying on a generic rail-to-rail op-amp model.
The 500 kHz typical gain-bandwidth product makes the TLV2763IN appropriate for low-frequency and moderate-bandwidth instrumentation, but it is not intended for high-speed waveform or RF chains. Limit capacitive loading on the output and select compensation values from the manufacturer's typical application circuit. For sensor signals with wide dynamic range, use filtering and gain stages that keep the amplifier inside its linear operating region without relying on rail-to-rail output swing at heavy loads.
Compliance Information
The operating temperature range and general-purpose industrial-product classification are identified, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 declaration appears in the listed source content.