TLV2763IN - Dual 1.8V Micropower RRIO Op Amp | TI
MPN: TLV2763IN ✓ NakahandaTLV2763IN Ulas
A rail-to-rail-input and rail-to-rail-output operational amplifier, commonly described as a RRIO amplifier, can accept input signals near the positive and negative supply rails while driving loads toward those limits. This makes the TLV2763IN useful when the usable input range must extend beyond conventional common-mode limits. As a dual amplifier in a 14-pin PDIP, it can implement two independent gain or buffer stages while simplifying through-hole prototype construction.
Key characteristics include 1.8 V single-supply operation, dual-channel operation, 500 kHz typical gain-bandwidth product, 20 µA typical supply current per channel, and 10.2 mA typical output current. Shutdown support is particularly useful for battery-powered instrumentation because the amplifiers can be disabled when signal-chain activity is not required, reducing system power consumption.
The TLV2763IN belongs to the operational-amplifier hierarchy, where it combines low input and output swing limits, low quiescent current, and moderate bandwidth. Its rail-to-rail behavior makes it appropriate for sensor interfaces, portable measurement systems, battery monitoring, and low-voltage analog signal chains. The shutdown function also supports duty-cycled acquisition circuits where preserving standby power is important.
Typical applications include portable sensor conditioning, low-voltage data acquisition, current-loop signal processing, audio preamplification, and general-purpose dual-stage amplification. Its 500 kHz bandwidth is appropriate for low-frequency and moderate-bandwidth instrumentation rather than high-speed video or RF signal paths. The 10.2 mA typical output-current capability is sufficient for buffer and low-load drive applications.
When designing around the TLV2763IN, account for the dropout region, output-capacitance stability requirements, input bias-current effects, and the shutdown logic level. Place input and output compensation components close to the relevant pins and avoid excessive capacitive loading at the output. Use the manufacturer datasheet pin-description table and typical application circuits to confirm external component values and logic thresholds before production release.
This page combines the manufacturer operating characteristics, package information, application guidance, and engineering-focused replacement analysis for the TLV2763IN. It also identifies the critical distinctions between genuine same-footprint alternatives and devices that are only functionally similar, helping engineers make a board-level decision without relying on incomplete catalog descriptions.
Mga alternatibo na pwedeng ilagay na TLV2763IN — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok TLV2763IN (parehas na form factor at footprint) — pagkakaiba sa Amplifier Type, Gain-Bandwidth Product, Package, Supply Current.
TLV2762IN
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
TLV2764IN
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →TLV2763IN Mga Pinakamataas na Rating at Electrical Characteristics
| Amplifier Type | Dual operational amplifier |
| Number of Circuits | 2 circuits |
| Supply Voltage Range | 1.8 V minimum single supply |
| Supply Type | Single supply |
| Rail-to-Rail Input | Yes |
| Rail-to-Rail Output | Yes |
| Gain-Bandwidth Product | 500 kHz typical |
| Kuru-kuryente ng Pagbibigay | 20 µA typical per channel |
| Output Current | 10.2 mA typical |
| Shutdown Function | Yes |
| Hanay ng Temperature na Operasyon | -40 °C to +85 °C |
| Packhaging | 14-pin PDIP |
| Package Pitch | 7.62 mm |
| Uri ng Pagpapasok | Through-hole |
| Product Type | Standard general-purpose amplifier |
Gabay sa Pin Configuration ng TLV2763IN 7.62 mm
Pin configuration para sa TLV2763IN (7.62 mm package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa TLV2763IN.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
TLV2763IN ay nararapat para sa 6 aplikasyons: Battery-Powered Sensor Conditioning, Portable Data Acquisition, Current-Loop Signal Conditioning, Low-Voltage Audio Preamplification, Battery Monitoring, Low-Power IoT Signal Conditioning.
Battery-Powered Sensor Conditioning
The TLV2763IN fits low-power sensor interfaces because each channel typically consumes 20 µA and the family supports 1.8 V single-supply operation. Its rail-to-rail inputs preserve signal range close to the supply limits, while rail-to-rail outputs improve drive into the next low-voltage stage. Two channels can condition a sensor and its reference or provide gain and buffering without a separate dual package. The 500 kHz typical bandwidth is more than adequate for temperature, pressure, and slow chemical-sensor waveforms. Shutdown can reduce consumption during inactive measurement intervals, although the external sensor and reference loads must also be placed in a controlled off state.
Inirekomenda
Portable Data Acquisition
The TLV2763IN is useful in portable measurement systems where two analog channels must operate from a compact 1.8 V supply. A typical arrangement uses one amplifier for gain and another for active filtering or input buffering. Its 500 kHz gain-bandwidth product supports moderate-frequency sensor acquisition while the 20 µA per-channel supply current limits power demand. Rail-to-rail input and output stages increase the usable signal span in systems whose analog front end operates near the supply rails. The shutdown function supports duty-cycled acquisition, while the through-hole 14-pin PDIP package simplifies prototype assembly and bench validation.
Inirekomenda
Current-Loop Signal Conditioning
The TLV2763IN can amplify the voltage produced by a low-side current-shunt or current-loop transmitter in a 1.8 V industrial or laboratory system. Its dual-channel arrangement permits separate gain stages for signal and reference channels, while rail-to-rail inputs accommodate sensor voltages near either supply rail. The 500 kHz typical bandwidth is suitable for many process-control signals and sensor dynamics, and the typical 10.2 mA output-current capability is appropriate for high-impedance downstream circuitry. Design the shunt, input filtering, and output loading so the amplifier remains stable with the complete sensor network and any cable capacitance.
Inirekomenda
Low-Voltage Audio Preamplification
The TLV2763IN can serve as a dual low-voltage audio preamplifier in portable equipment, microphone interface, or line-level conditioning stage. Rail-to-rail input and output operation allows the circuit to work with signals close to the 1.8 V supply, while the dual configuration can process left and right channels independently. The 500 kHz typical gain-bandwidth product covers the audio band with substantial bandwidth margin, and the typical 10.2 mA output-current capability suits normal low-impedance preamplifier loads. Shutdown is useful for battery-operated audio products, but the external microphone bias, gain-setting network, and output coupling must be designed around the amplifier's input and output behavior.
Inirekomenda
Battery Monitoring
The TLV2763IN is appropriate for monitoring a low-voltage battery or energy-storage node when the measurement circuit must operate near 1.8 V. One channel can buffer a scaled battery voltage while the other handles a current-sense signal or reference, reducing the need for separate amplifiers. Rail-to-rail inputs improve measurement utilization, and the 20 µA typical supply current per channel helps preserve standby energy. The 500 kHz bandwidth is suitable for slow voltage trends and filtered current measurements rather than high-dV/dt protection systems. Accurate results still require a suitably scaled divider or shunt, input filtering appropriate for the source impedance, and calibration across temperature.
Inirekomenda
Low-Power IoT Signal Conditioning
The TLV2763IN supports IoT sensor nodes that translate low-level analog inputs into a signal suitable for sampling or comparison. Its 1.8 V operation, rail-to-rail inputs, and 20 µA per-channel supply current are useful in compact battery-powered devices, while two integrated channels can handle a sensor signal and a buffered threshold or reference. The 500 kHz typical bandwidth is suitable for many low-rate environmental sensors and avoids the power and interference burden of a much faster amplifier. Shutdown allows duty-cycled operation between measurement intervals. Layout should minimize leakage around high-impedance inputs, and the output network should avoid excessive capacitance that could compromise stability.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for TLV2763IN — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | TLV2762IN | TLV2764IN |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP |
| Amplifier Configuration | Dual | Dual | Dual |
| Minimum Supply Voltage | 1.8 V | 1.8 V | 1.8 V |
| Supply Type | Single supply | Single supply | Single supply |
| Rail-to-Rail Input | Yes | Yes | Yes |
| Rail-to-Rail Output | Yes | Yes | Yes |
Pangunahing mga Pagkakaiba
- Provides a confirmed shutdown-equipped dual low-voltage configuration (kumpara saTLV2762IN)
- Uses a practical 14-pin PDIP footprint for through-hole assembly (kumpara saTLV2764IN)
- Balances 500 kHz bandwidth with micropower consumption (kumpara saTLV2764IN)
Talaan ng Disenyo
Budget the dual amplifier at approximately 40 µA total from the stated 20 µA typical supply current per channel. This estimate excludes external divider, sensor, and shutdown-support loads. Because the circuit operates from as little as 1.8 V, verify that every downstream signal and the shutdown-control logic remain within valid input and output ranges. Confirm the actual operating voltage against the electrical-characteristics table before using the typical current figure for a battery-life calculation.
Use the 14-pin PDIP footprint and follow the counter-clockwise numbering shown by the package drawing. Keep feedback resistors, input filtering components, and decoupling capacitors close to their associated amplifier pins. Short supply and ground paths reduce voltage drops and susceptibility from surrounding switching circuitry. If the same PCB may also carry another dual amplifier, preserve adequate clearance between packages and verify pin 1 orientation after assembly.
Do not assume that every member of the TLV2763 family has identical shutdown behavior or logic levels. Confirm the enable-pin polarity, inactive-state output condition, compensation method, and stability requirements for the exact alternative MPN in the manufacturer datasheet. Also avoid connecting high-impedance sources without accounting for input bias-current error and leakage. Validate the complete circuit at the intended supply voltage and load rather than relying on a generic rail-to-rail op-amp model.
The 500 kHz typical gain-bandwidth product makes the TLV2763IN appropriate for low-frequency and moderate-bandwidth instrumentation, but it is not intended for high-speed waveform or RF chains. Limit capacitive loading on the output and select compensation values from the manufacturer's typical application circuit. For sensor signals with wide dynamic range, use filtering and gain stages that keep the amplifier inside its linear operating region without relying on rail-to-rail output swing at heavy loads.
Impormasyon ng Pagsunod sa Kautusan
The operating temperature range and general-purpose industrial-product classification are identified, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 declaration appears in the listed source content.