Texas Instruments

TMS320C44GFW60 - 60MHz Floating-Point DSP | Texas Instruments

MPN: TMS320C44GFW60 ✓ Active
5 V Vdss 388-BGA plastic ball grid array Package 60 MHz Speed 336 Mbytes/s Memory
MOQ: 1 |

TMS320C44GFW60 Overview

The Texas Instruments TMS320C44GFW60 is a floating-point digital signal processor operating at 60 MHz with a 32-bit architecture, 40-bit data bus, 8,192 RAM words, and a 388-BGA package measuring 35 x 35 mm. According to the manufacturer datasheet, the device delivers 60 MFLOPS, 330 MOPS, 30 MIPS, and a 33 ns instruction-cycle time for intensive real-time signal-processing workloads.

A digital signal processor is a specialized semiconductor that executes mathematically intensive operations in parallel. Unlike a general-purpose processor, the TMS320C44 architecture includes dedicated floating-point arithmetic and communication resources suited to filtering, transform, spectral analysis, and control loops. Its position within the semiconductor hierarchy is digital signal processor, embedded processor, and programmable real-time processing system.

The TMS320C44GFW60 combines four communication ports with a six-channel direct-memory-access system, enabling parallel movement of data among external memory, serial links, and processing resources. The 40-bit data bus supports high-throughput transfers, while the 8,192-word internal RAM provides fast working memory for signal buffers and intermediate calculations. These characteristics are especially useful where deterministic execution and concurrent data movement are required.

For the 60 MHz speed grade, the processor executes instructions with a 33 ns cycle time and supports a 5 V supply. The floating-point capability is valuable in algorithms that repeatedly perform multiply-accumulate operations, including digital filtering, fast Fourier transform processing, spectral estimation, adaptive control, and communications signal conditioning. The manufacturer describes the device as a high-performance floating-point DSP with 60 MFLOPS and 330 MOPS.

Typical applications include industrial motor and power-system control, communications infrastructure, audio and speech processing, biomedical signal analysis, vibration monitoring, and embedded radar or sonar processing. The four communication ports can divide input, output, and control traffic among independent channels, while direct memory access reduces processor intervention during block transfers. The 35 x 35 mm BGA also supports dense multilayer-board designs when adequate escape routing and thermal management are provided.

The principal design considerations are board area, power delivery, clock integrity, thermal performance, and BGA assembly. Because the 388-ball footprint is large and fine-pitch, follow the manufacturer pin-assignment table and PCB land-pattern guidance exactly. Decoupling should be distributed near the supply and ground connections, and clock and serial interfaces should be routed with controlled impedance and return paths to minimize crosstalk.

This product page consolidates verified electrical characteristics, package information, practical application guidance, drop-in replacement analysis, and engineering design notes. The comparison and selection material helps engineers determine whether the TMS320C44GFW60, its 50 MHz family member, or a redesigned DSP platform best matches a specific board and performance target.

Drop-in alternatives for TMS320C44GFW60 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with TMS320C44GFW60 (same form factor and footprint) — differing in Instruction Cycle Time, Package Type, Package Dimensions, Architecture, Operating Temperature Range.

Texas Instruments
Instruction Cycle Time: 40 ns at 50 MHz
Package Type: 388-BGA
Architecture: 32 bit
Compare with TMS320C44GFW60 →
Texas Instruments
Instruction Cycle Time: 40 ns
Package Type: Plastic BGA
Package Dimensions: 35 mm x 35 mm
Compare with TMS320C44GFW60 →

TMS320C44GFW50

✅ Drop-In
Texas Instruments
📦 388-BGA (35 x 35 mm)
Floating-point digital signal processor (DSP) · 50 MHz · 32 bit · 8192 words · 388-BGA · 35 x 35 mm · Square · 388 balls

Contact for price

View Datasheet →

TMS320C44GFW60 Specifications

Processor Type Floating-point digital signal processor
Maximum Clock Frequency 60 MHz
Architecture 32-bit DSP architecture
Data Bus Width 40 bit
Floating-Point Performance 60 MFLOPS
Operations per Second 330 MOPS
Instruction Throughput 30 MIPS
Instruction Cycle Time 33 ns
Internal RAM Capacity 8192 words
Memory Transfer Rate 336 Mbytes/s
Communication Ports 4 ports
Direct Memory Access Channels 6 channels
Supply Voltage 5 V
Operating Temperature Range 0 C to 85 C
Package Type 388-BGA plastic ball grid array
Package Dimensions 35 x 35 mm
Pin Count 388 balls
Mounting Type Surface mount

TMS320C44GFW60 35 x 35 mm Pin Configuration Guide

Pin configuration for TMS320C44GFW60 (35 x 35 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

35 x 35 mm package pinout diagram for TMS320C44GFW60

No detailed pinout data available for TMS320C44GFW60.

Refer to the datasheet for full pin configuration.

Typical Applications

TMS320C44GFW60 is suitable for 6 applications: Industrial Motor Control, Digital Filtering and Spectrum Analysis, Communications Signal Conditioning, Vibration and Condition Monitoring, Audio and Speech Processing, Medical and Biomedical Signal Processing.

🏭

Industrial Motor Control

The TMS320C44GFW60 fits real-time motor-control systems that combine high-speed current sampling with deterministic floating-point computation. Its 60 MHz clock, 60 MFLOPS performance, and six direct-memory-access channels support control-loop execution while data moves between converters, memories, and communication peripherals. The four communication ports can separate feedback acquisition, supervisory communications, and service or diagnostic traffic. This separation helps a controller maintain predictable timing when a design must process several control loops concurrently.

🌐

Digital Filtering and Spectrum Analysis

The TMS320C44GFW60 is suitable for digital filter banks, FFT processing, and real-time spectral analysis because it combines 330 MOPS with 60 MFLOPS and a 33 ns instruction-cycle time. Floating-point arithmetic simplifies scaling in transforms and adaptive filtering, while the 8,192-word RAM can hold time-domain samples and working coefficients. Its six-channel DMA engine allows acquisition and output blocks to move concurrently with computation, reducing the processor burden during long signal-chain operations.

🌐

Communications Signal Conditioning

The TMS320C44GFW60 can support communications front ends that require real-time filtering, modulation processing, and concurrent data movement. Four communication ports provide dedicated resources for receiving samples, transmitting results, and managing control traffic, while the 336 Mbytes/s family transfer rate supports block transfers involving external memory. The processor's 60 MHz clock and 60 MFLOPS throughput are useful when a design must validate modulation algorithms, apply channel filters, and maintain continuous sample flow without relying on a general-purpose host processor.

🖥️

Vibration and Condition Monitoring

The TMS320C44GFW60 is appropriate for machinery vibration monitoring that requires continuous acquisition, spectral transformation, and feature extraction. Its six direct-memory-access channels can support simultaneous data collection from multiple sensor streams, and the 40-bit bus provides a wide path for moving sample blocks through the processor. At 60 MFLOPS, the device can evaluate filtering and spectral-estimation stages in real time while four communication ports isolate data transfer from diagnostic or network-facing functions.

🎧

Audio and Speech Processing

The TMS320C44GFW60 can implement real-time audio filters, speech-analysis functions, and multichannel mixing when the design requires floating-point calculation and deterministic sample handling. Its 330 MOPS rating provides useful throughput for recursive filtering, interpolation, and spectral analysis, while the six-channel DMA engine reduces interrupt overhead during continuous audio streaming. The 5 V supply and 0 C to 85 C temperature range support industrial or professional embedded equipment, although final acoustic performance remains dependent on converters, clocks, and analog circuitry.

💊

Medical and Biomedical Signal Processing

The TMS320C44GFW60 can support biomedical waveform analysis, patient-monitoring signal processing, and diagnostic equipment that performs filtering and spectral analysis on multiple channels. The six-channel DMA system assists with continuous acquisition, while the floating-point execution unit supports gain stages, filter updates, and feature calculations without repeated scaling. The 8,192-word RAM provides fast local storage for working buffers, and the 60 MHz clock helps meet real-time processing windows. Medical-system safety, isolation, and validation requirements remain system-level obligations.

What are the key specifications of TMS320C44GFW60 that engineers should know?
The TMS320C44GFW60 is a 60 MHz floating-point DSP with a 32-bit architecture, 40-bit data bus, 8,192 RAM words, and four communication ports in a 388-BGA package. According to the manufacturer datasheet, it provides 60 MFLOPS, 330 MOPS, 30 MIPS, and a 33 ns instruction-cycle time. It operates from a 5 V supply over 0 C to 85 C, making it a deterministic real-time processor for demanding filtering, communications, and industrial-control systems.
Where can I download the TMS320C44GFW60 datasheet PDF?
The TMS320C44GFW60 datasheet PDF can be downloaded from the Texas Instruments product documentation at https://www.ti.com/lit/ds/symlink/tms320c44.pdf. The manufacturer datasheet contains the authoritative pin description, electrical characteristics, communication-port information, external-memory interfaces, timing requirements, and package drawings. Use that document to assign all 388 BGA connections and to verify operating limits before releasing PCB artwork or production firmware.
Where can I find the TMS320C44GFW60 pinout?
The TMS320C44GFW60 pinout is defined in the pin-description and package-drawing sections of the Texas Instruments TMS320C44 manufacturer datasheet. The device uses a 388-ball BGA package, so the complete connection list must be taken directly from the manufacturer tables rather than inferred from a generic BGA drawing. Verify supply, ground, clock, communication-port, external-memory, and control-signal assignments against the exact 60 MHz ordering code before PCB release.
What is the TMS320C44GFW60 used for?
The TMS320C44GFW60 is used for real-time floating-point signal processing, including digital filtering, fast Fourier transform work, communications, vibration analysis, industrial control, and embedded audio. According to the manufacturer datasheet, its 60 MFLOPS performance, four communication ports, and six-channel direct-memory-access system allow concurrent computation and data movement. These features make it suitable where deterministic throughput and parallel peripheral transfers are more important than low-cost general-purpose processing.
How much processing performance does the TMS320C44GFW60 provide?
The TMS320C44GFW60 provides 60 MFLOPS, 330 MOPS, 30 MIPS, and a 33 ns instruction-cycle time at its 60 MHz operating speed. The manufacturer datasheet identifies the device as a high-performance floating-point DSP, which is advantageous for algorithms dominated by multiply-accumulate operations. Actual application performance also depends on memory placement, direct-memory-access configuration, instruction scheduling, and the number of operations that the compiler can map efficiently onto the DSP architecture.
What are the power and operating-temperature limits of TMS320C44GFW60?
The TMS320C44GFW60 operates from a 5 V supply and has a specified operating-temperature range of 0 C to 85 C. The manufacturer datasheet also defines the detailed absolute-maximum and recommended operating conditions; use those limits during component selection and fault analysis. Because this is a 388-ball BGA with substantial external interface capability, system-level thermal design should account for both the processor's dissipation and the heat flow through the board.
What can replace the TMS320C44GFW60 on the same PCB?
The closest identified same-package family replacement is the Texas Instruments TMS320C44GFW50, which retains the 388-BGA architecture but reduces maximum clock frequency from 60 MHz to 50 MHz, a 16.7% reduction. No other same-footprint, pin-to-pin replacement was confirmed from the available cross-reference results. Before substitution, verify the complete ball assignment, voltage requirements, timing assumptions, external-memory interface, communications peripherals, and thermal design rather than relying only on the processor-family name.
Can TMS320C44GFW50 replace TMS320C44GFW60?
The TMS320C44GFW50 is the nearest confirmed drop-in family option, but its maximum clock is 50 MHz instead of 60 MHz, making it 16.7% slower at the processor clock. Because it is a lower-speed member of the same TMS320C44 family, the shared 388-BGA footprint supports a board-level substitution when timing margins, memory bandwidth, and I/O throughput remain acceptable. Software timing and any clock-dependent peripheral assumptions must be revalidated after replacement.
Is TMS320C44GFW60 suitable for industrial control applications?
The TMS320C44GFW60 is suitable for industrial control applications that require deterministic floating-point computation, concurrent communications, and direct-memory-access transfers. Its 0 C to 85 C rated range, 60 MFLOPS performance, four communication ports, and six DMA channels support tasks such as motor control, power-system monitoring, vibration analysis, and multi-channel data acquisition. The final design should still verify industrial EMC, environmental, isolation, and safety requirements beyond the component-level operating specifications.
What is the difference between TMS320C44GFW60 and TMS320C44GFW50?
The principal documented difference is maximum processor clock frequency: the TMS320C44GFW60 operates at 60 MHz, while the TMS320C44GFW50 operates at 50 MHz, a 16.7% reduction. Both are identified as members of the TMS320C44 floating-point DSP family and use the 388-BGA package. The slower device is appropriate when the required processing margin does not depend on the additional clock rate, while the 60 MHz part remains preferable for tighter execution windows and higher real-time throughput.
When should I choose TMS320C44GFW60 instead of TMS320C44GFW50?
Choose the TMS320C44GFW60 when the algorithm requires more than 50 MHz execution speed, tighter deterministic response, or greater throughput than the TMS320C44GFW50 can provide. The 60 MHz device offers 60 MFLOPS and a 33 ns instruction cycle compared with the 50 MHz family member's lower clock rate. Select the 50 MHz option only after confirming that processor time, memory bandwidth, communication throughput, and firmware timing remain within the reduced performance envelope.
Is there a pin-compatible cross-brand replacement for TMS320C44GFW60?
No confirmed pin-compatible cross-brand replacement was identified for the TMS320C44GFW60. The 388-ball BGA footprint contains a highly processor-specific pin arrangement, so parts in other DSP families should be treated as redesign alternatives rather than drop-in substitutes. Even when another device offers similar floating-point performance, differences in memory interfaces, communications peripherals, clocking, development tools, and ball assignments can prevent PCB reuse. Request a current manufacturer-assisted cross-reference before committing to any replacement.
Where can I buy TMS320C44GFW60 online?
Use the Request a Quote form on this page to request TMS320C44GFW60 availability, current commercial terms, and order routing. The product is listed in a 388-BGA package and is a Texas Instruments floating-point DSP, so the exact ordering code, packing method, and quantity must be confirmed before an order is placed. The request form provides a single route for quotation without embedding figures that may change with supply conditions.
What is the price of TMS320C44GFW60?
Use the Request a Quote form on this page for the current TMS320C44GFW60 price and quantity terms. Commercial pricing can vary with the exact package, packing code, order quantity, and market conditions, so an old listing value should not be treated as a current quotation. Include the required quantity, target package or reel format, and intended shipment location in the request to obtain an actionable commercial response.
What is the lead time and stock status of TMS320C44GFW60?
Submit the TMS320C44GFW60 part number and required quantity through the Request a Quote form on this page to confirm current stock, lead time, and minimum-order conditions. The verified product listings identify the device as a Texas Instruments 388-BGA DSP, but they do not establish a fixed, transferable inventory commitment. Production planners should obtain a dated supply confirmation and avoid treating general listing availability as a guaranteed allocation for an assembled build.
How does the TMS320C44GFW60 support high-speed data movement?
The TMS320C44GFW60 supports high-speed data movement through its 40-bit data bus, six-channel direct-memory-access system, and four communication ports. The manufacturer datasheet identifies a 336 Mbytes/s memory transfer rate for the device family. These resources allow data blocks to move concurrently with computation, which reduces processor overhead in filtering, FFT, communications, and acquisition systems. Designers should still allocate memory and DMA channels carefully to prevent contention and sustain predictable real-time behavior.

Engineering reference data for TMS320C44GFW60 — comparison, design guidance, and compliance information.

Selection Guide

Choose the TMS320C44GFW60 when a design needs the highest clock rate in the identified TMS320C44GFW package family, particularly for real-time filtering, communications, industrial control, or spectrum-analysis loops with tight execution windows. Its 60 MHz clock, 33 ns cycle time, 60 MFLOPS, and 330 MOPS provide more scheduling margin than the TMS320C44GFW50. The latter remains a practical drop-in family option when the PCB and firmware tolerate its 50 MHz clock and 40 ns cycle time. Its 16.7% lower clock rate can affect deadlines, memory throughput, and peripheral timing, so those calculations must be repeated. No same-footprint cross-brand replacement was confirmed; competing DSP families should be evaluated as redesigns rather than replacements. Confirm pin assignment, external-memory compatibility, development-tool support, software migration, lifecycle status, thermal performance, and assembly capability before approving a substitution.

Comparison with Alternatives

Parameter This Product TMS320C44GFW50
Package 388-BGA (35 x 35 mm) 388-BGA (35 x 35 mm) - same
Brand Texas Instruments Texas Instruments
Maximum Clock Frequency 60 MHz 50 MHz
Instruction Cycle Time 33 ns 40 ns
Data Bus Width 40 bit 40 bit
Supply Voltage 5 V 5 V
Communication Ports 4 ports 4 ports
Direct Memory Access Channels 6 channels 6 channels
Internal RAM Capacity 8192 words 8192 words
Operating Temperature Range 0 C to 85 C 0 C to 85 C
Processor Type Floating-point DSP Floating-point DSP

Key Differentiators

  • Higher real-time clock in the identified same-package family option (vs TMS320C44GFW50)
  • Stronger throughput for real-time signal-processing loops (vs TMS320C44GFW50)
  • Board reuse remains possible within the TMS320C44 speed-grade family (vs TMS320C44GFW50)

Design Notes

Use the exact manufacturer PCB land pattern and all 388 ball assignments for the TMS320C44GFW60. A 35 x 35 mm BGA does not provide fine-pitch escape routing by itself; multilayer construction, via-in-pad or fanout features, and solder-mask-defined pads may be required. Preserve the manufacturer's ball-map orientation when laying out the board, and validate assembly stencil, via-in-pad fill, and thermal-via strategy against the package documentation before releasing artwork.

Plan the 5 V supply network for the processor's full load and transient response rather than assuming the nominal voltage alone is sufficient. Place the required bypass capacitors at the locations specified in the manufacturer reference design, with short, low-inductance connections to the appropriate supply and ground balls. Check the datasheet's recommended operating conditions, absolute maximum ratings, source current limits, and power-supply sequencing requirements before selecting regulator capacity.

Treat clock, external-memory, and communication interfaces as controlled-impedance paths from the first layout revision. Provide continuous reference planes, minimize stub branches, and match trace geometry to the PCB fabricator's stack-up. Keep switching digital and communication routes away from sensitive analog inputs, and confirm clock jitter, setup time, hold time, and maximum loading against the manufacturer timing tables.

Estimate worst-case processor dissipation under the intended clock, peripheral, and I/O activity because total board power is not represented by the 60 MHz clock rating alone. Use the manufacturer thermal data for junction and package limits, then provide thermal vias and suitable copper spreading beneath the BGA. Compare estimated junction temperature with the 0 C to 85 C component operating range and allow margin for enclosure temperature, airflow, and adjacent heat sources.

Do not treat the TMS320C44GFW50 as an automatic substitute for the TMS320C44GFW60. The confirmed difference is a 50 MHz versus 60 MHz maximum clock, which changes cycle time from 40 ns to 33 ns and can alter every real-time deadline. Revalidate firmware timing, DMA throughput, peripheral clock assumptions, memory access margins, and thermal performance after changing speed grades.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No explicit component-level RoHS, REACH, halogen-free, or conflict-minerals statement was identified for this ordering code. AEC-Q100 qualification is not indicated.

Data verified on: 2026-11-10 — data verified and curated by XAIPART's component engineering team

Related Searches

TMS320C44GFW60 datasheet TMS320C44GFW60 pinout TMS320C44GFW60 datasheet pdf TMS320C44GFW60 equivalent TMS320C44GFW60 replacement TMS320C44GFW60 footprint TMS320C44GFW60 price TMS320C44GFW60 stock Texas Instruments TMS320C44GFW60 TMS320C44GFW60 vs TMS320C44GFW50 60MHz floating point DSP TMS320C44GFW60 TMS320C44GFW60 industrial control TMS320C44GFW60 388 BGA what is TMS320C44GFW60

Related Components & Terms

Texas Instruments TMS320C44GFW60 TMS320C44GFW50 digital signal processor DSP floating-point processor embedded processor programmable real-time processor semiconductor 32-bit architecture 40-bit data bus 60 MHz clock 60 MFLOPS 330 MOPS 30 MIPS 8,192-word RAM direct memory access DMA four communication ports six-channel DMA 388-BGA 35 x 35 mm BGA surface-mount package industrial motor control digital filtering FFT processing
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details