Texas Instruments

TS3V330D - 4-Channel SPDT Video Switch | Texas Instruments

MPN: TS3V330D ✓ Active
3.3 V Vdss 16-pin SOIC Package
MOQ: 1 |

TS3V330D Overview

Texas Instruments TS3V330D is a 3.3 V, four-channel, 2:1 SPDT video switch packaged in a 16-pin SOIC. It provides one enable input for the quad switch and is designed for wide-bandwidth video-routing applications. The device operates across the -40°C to +85°C industrial temperature range. Its low on-state resistance is intended to minimize signal attenuation when a video path is selected.

A video switch is an analog multiplexer or demultiplexer that routes one of two signal paths to a common output. The SPDT configuration supports source selection, signal swapping, and isolation between alternate inputs. In the system hierarchy, the TS3V330D belongs to the analog switch family, which falls under interface ICs and broader semiconductor signal-routing devices. Four integrated channels reduce component count when several video lines must be switched together.

The principal features of the TS3V330D include four independent 2:1 switch channels, a common single switch-enable input, a 3.3 V supply requirement, wide-bandwidth video switching, and low on-state resistance. The 16-SOIC package supports conventional surface-mount assembly. These characteristics make the device relevant to video test equipment, multimedia routing, projection systems, display processing, and industrial imaging designs where multiple source paths must be selected electronically.

The TS3V330D uses a single enable-control architecture rather than four separate control inputs. This simplifies command-line interfacing when all four channels must change state together. Its wide-bandwidth design is intended to preserve video signals while keeping conduction loss relatively low. Because a video switch is an analog device, signal integrity depends not only on on-state resistance but also on off-state isolation, channel matching, board-level parasitics, and the impedance of the source and destination circuitry.

Typical implementations include selecting between composite or component video inputs, routing test signals into an oscilloscope or video analyzer, switching cameras within surveillance equipment, and controlling auxiliary video paths in projection or display equipment. The common enable input also supports systems that need to mute or disconnect several video lines together. Firmware-controlled source selection is particularly practical when the same board must support several external connectors.

PCB layout should keep video traces short, provide a continuous ground reference, and place bypass capacitance close to the supply pin. Designers should verify the complete channel bandwidth, isolation, insertion loss, and crosstalk against the source impedance and cable length. The common enable signal should be controlled only after the selected input is stable, preventing transient switching artifacts from reaching downstream video circuitry.

This product page combines the device identity, package information, operating limits, confirmed cross-reference options, and practical design guidance for engineers evaluating the TS3V330D. It also distinguishes the core four-channel SPDT switching function from broader interface and signal-routing categories, making the component easier to compare with suitable video-switching designs.

Drop-in alternatives for TS3V330D — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

TS3V330DR

✅ Drop-In
📦 16-SOIC
0 V difference in stated supply-voltage class; identical four-channel 2:1 SPDT function and 16-pin SOIC package

📋 Reference alternative (not in catalog)

TS3V330DE4

✅ Drop-In
📦 16-SOIC
0 V difference in stated supply-voltage class; identical four-channel 2:1 SPDT function and 16-pin SOIC package

📋 Reference alternative (not in catalog)

TS3V330DRE4

✅ Drop-In
📦 16-SOIC
0 V difference in stated supply-voltage class; identical four-channel 2:1 SPDT function and 16-pin SOIC package

📋 Reference alternative (not in catalog)

TS3V330D Maximum Ratings & Electrical Characteristics

Product Type 4-channel 2:1 SPDT video switch
Number of Channels 4 channels
Switch Configuration 2:1 SPDT
Supply Voltage 3.3 V
Package 16-pin SOIC
Pin Count 16 pins
Operating Temperature Range -40°C to +85°C
Switch Enable Inputs 1 common switch-enable input
Mounting Type Surface mount

TS3V330D 16-pin soic Pin Configuration Guide

Pin configuration for TS3V330D (16-pin soic package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

16-pin soic package pinout diagram for TS3V330D

No detailed pinout data available for TS3V330D.

Refer to the datasheet for full pin configuration.

Typical Applications

TS3V330D is suitable for 6 applications: Video Source Selection, Video Test and Measurement, Industrial Inspection Systems, Surveillance Camera Routing, Display and Projection Equipment, Multimedia and Connectivity.

📺

Video Source Selection

The TS3V330D is well suited to selecting between two analog video sources because it combines four 2:1 SPDT channels in one 16-pin SOIC. A receiver can route the selected inputs through the switch using a common enable signal rather than placing four separate single-channel devices on the board. The 3.3 V supply matches many digital video-processing systems, while wide-bandwidth operation and low on-state resistance help preserve the selected signal. This arrangement is useful in test equipment, multimedia inputs, and display systems that must present different sources through a shared downstream channel.

🔧

Video Test and Measurement

The TS3V330D can route multiple video connections toward a common test path when an instrument needs to choose among several sources. Its four independent SPDT positions provide parallel routing while the common switch-enable input allows coordinated state changes. The 16-SOIC package keeps the implementation compact, and the -40°C to +85°C range supports laboratory and industrial test equipment. Engineers should preserve controlled return paths and verify the complete signal chain because connector launches and cable impedance can influence isolation and crosstalk.

🏭

Industrial Inspection Systems

The TS3V330D fits industrial inspection equipment that alternates among camera or video-source paths. Four SPDT channels allow several related signals to change selection together, which can simplify synchronization in systems carrying video, sync, or associated control signals. Its 3.3 V operation integrates readily with modern embedded processing, and the -40°C to +85°C range covers many factory environments. The common enable input should be sequenced carefully so that the selected source has settled before downstream circuitry samples or displays the routed signal.

🎥

Surveillance Camera Routing

The TS3V330D can support routing among multiple surveillance-video inputs in compact camera or monitoring equipment. Its four-channel 2:1 arrangement allows one output path to select between alternative sources without requiring four separate switch packages. The 3.3 V supply and 16-pin SOIC are appropriate for space-conscious electronics, while the wide-bandwidth design targets video signals. Layout should maintain a continuous ground plane, minimize long video loops, and account for protection-network capacitance that could degrade isolation or channel matching.

📺

Display and Projection Equipment

The TS3V330D is applicable to display and projection systems that must route one of two video inputs into a shared processing path. Four channels permit coordinated selection of video-related signals, while a single common enable input reduces control complexity. The 16-pin SOIC footprint supports compact board layouts, and the 3.3 V supply integrates with contemporary display controllers. To preserve signal quality, route video lines over continuous ground planes, keep bypass capacitance close to the supply connection, and verify connector and cable behavior across the intended video bandwidth.

📱

Multimedia and Connectivity

The TS3V330D can provide compact analog switching in multimedia panels, docking products, and connectivity modules that offer selectable video inputs. Four 2:1 channels reduce the footprint required for multiple route selections, and the common enable input supports coordinated switching through one control signal. The 3.3 V supply is practical for portable and embedded equipment, while the -40°C to +85°C range supports industrial variants. Firmware should avoid changing the route while downstream devices are active if transient artifacts would be visible or misinterpreted.

What is the TS3V330D?
The TS3V330D is a Texas Instruments 3.3 V, four-channel, 2:1 SPDT video switch in a 16-pin SOIC package. It provides wide-bandwidth signal routing with low on-state resistance and a single common switch-enable input. According to the Texas Instruments product page and manufacturer datasheet, the device combines four video-switch channels in one package, reducing the component count in systems that route several related signals together.
How many channels and switch positions does the TS3V330D have?
The TS3V330D provides four channels, with each channel using a 2:1 SPDT configuration. It can therefore select one of two paths for each of four signal lines. The manufacturer identifies the device as a 3.3 V quad SPDT video switch, and the distributor product listing describes it as a four-channel, 16-pin SOIC video-switch IC designed for wide-bandwidth routing.
What is the supply voltage of the TS3V330D?
The TS3V330D operates from a 3.3 V supply. The Texas Instruments product page explicitly identifies the device as a 3.3 V video switch, while cross-reference listings also describe the exact MPN as a 3 V, 16-pin device. When designing the supply rail, include local high-frequency bypass capacitance and verify the power transient requirements in the manufacturer datasheet.
Where can I download the TS3V330D datasheet PDF?
The official Texas Instruments datasheet is available through the TS3V330 product-support link at https://www.ti.com/lit/gpn/ts3v330. The manufacturer product page is https://www.ti.com/product/TS3V330 and provides the primary technical documents, ordering information, and parameter information. Use the manufacturer copy for the complete pin description, electrical characteristics, timing data, and application guidance.
Where can I find the TS3V330D pinout?
The TS3V330D pinout must be taken from the pin-description table in the Texas Instruments TS3V330 manufacturer datasheet. The verified device information establishes a 16-pin SOIC package and confirms the common enable architecture, but it does not reproduce every terminal name. Use the 16-pin SOIC drawing and datasheet table together before assigning traces or establishing the PCB footprint.
Can the TS3V330D switch four video signals together?
Yes. The TS3V330D contains four 2:1 SPDT channels and uses one common switch-enable input, allowing all four channels to be switched together. According to the manufacturer product page, it is a four-channel video switch. This arrangement is useful for synchronizing selection among several video interfaces, although each signal line must still be checked for bandwidth, isolation, and source-impedance requirements.
What is the difference between TS3V330D and TS3V330DR?
The confirmed cross-reference information identifies TS3V330DR as a direct replacement for TS3V330D, with consistent terminals, package, and principal performance characteristics. The identifiable electrical difference is 0 V in supply-voltage class, and both devices provide a four-channel 2:1 SPDT function in a 16-pin SOIC. Verify ordering suffixes, reel configuration, and assembly requirements before treating any specific packaged variant as interchangeable.
What is the best drop-in replacement for TS3V330D?
The directly supported replacement is TS3V330DR because the cross-reference record states that its terminals, package, and functional characteristics are completely replaceable with TS3V330D. TS3V330DE4 and TS3V330DRE4 are also listed as compatible replacements. Confirm the exact ordering code, temperature grade, tape-and-reel configuration, and production availability against your assembly requirements before substitution.
Can TS3V330DE4 replace TS3V330D without PCB changes?
Yes, the TS3V330DE4 is identified by the cross-reference record as a complete replacement with consistent terminals and package characteristics. It uses the same 16-pin SOIC format and retains the four-channel 2:1 SPDT switching function. No PCB changes are indicated by the compatibility record, but production controls should still verify the exact suffix and delivery configuration.
What can replace TS3V330D?
TS3V330DR is a confirmed drop-in option for TS3V330D, and the same compatibility record also lists TS3V330DE4 and TS3V330DRE4. These options retain the 16-pin SOIC package and the quad SPDT function with a 0 V difference in stated supply-voltage class. Treat the listed suffixes as orderable alternatives and confirm thermal, reel, and lifecycle requirements before purchasing.
When should I choose TS3V330D over another Texas Instruments video switch?
Choose the TS3V330D when the design requires four synchronized 2:1 video paths, a common enable input, and a 3.3 V supply in a 16-pin SOIC. It is less suitable when each signal must be switched independently, when a different channel count is required, or when the target application needs electrical characteristics outside the TS3V330 family. Compare the manufacturer timing and analog specifications before finalizing the selection.
Is TS3V330D suitable for industrial video equipment?
The TS3V330D is rated for an operating temperature range of -40°C to +85°C, making it appropriate for many industrial environments. Its four-channel SPDT architecture is useful in inspection systems, test equipment, surveillance equipment, and industrial displays where several analog video paths must be selected. The operating range supports the environmental requirement, but enclosure temperature, condensation, and system-level thermal conditions must be evaluated separately.
What are the key specifications of TS3V330D that engineers should know?
The key TS3V330D specifications are a 3.3 V supply, four 2:1 SPDT channels, one common switch-enable input, wide-bandwidth video switching, low on-state resistance, a 16-pin SOIC package, and a -40°C to +85°C operating range. These values come from the Texas Instruments product information and ordering listings. Exact resistance, bandwidth, isolation, timing, and current limits should be taken from the manufacturer datasheet.
Where can I buy TS3V330D online?
Use the Request a Quote form on this page to request TS3V330D availability, MOQ, current lead time, and order confirmation. The product is a 16-pin SOIC Texas Instruments video switch, and the Request a Quote workflow provides a direct response for the exact MPN. Confirm the package suffix and production quantity with the supplier before releasing a purchase order.
What is the price of TS3V330D?
Current TS3V330D pricing is obtained through the Request a Quote form on this page because commercial terms can vary with quantity, inventory, and order timing. The form is the appropriate route for a unit-price quotation, quantity-break review, and availability confirmation for the exact 16-pin SOIC MPN. The final quote should identify TS3V330D without substituting another suffix or package variant.
What is the lead time for TS3V330D?
Request the current TS3V330D lead time through the Request a Quote form on this page. The form can confirm production quantity, available inventory, and expected scheduling for the exact MPN rather than a related package code. Engineers should include their required delivery date and annual or prototype quantity so the supplier can provide an actionable commitment.

Engineering reference data for TS3V330D — comparison, design guidance, and compliance information.

Selection Guide

Choose the TS3V330D when a design needs four synchronized 2:1 video routes, a common enable input, a 3.3 V supply, and a 16-pin SOIC footprint. It is particularly useful in video test equipment, industrial inspection systems, surveillance routing, multimedia panels, and display equipment where several related paths must be selected together. Select TS3V330DR when that confirmed ordering variant better matches production packaging requirements. Choose TS3V330DE4 or TS3V330DRE4 when their corresponding assembly configuration is preferred, after checking the exact suffix and supplier status. Do not choose these options for a design requiring independent enable control per channel. Before finalizing any variant, verify on-state resistance, bandwidth, off-state isolation, insertion loss, timing, supply current, and pin assignments in the manufacturer datasheet, then confirm the operating-temperature and lifecycle requirements for the production design.

Comparison with Alternatives

Parameter This Product TS3V330DR TS3V330DE4 TS3V330DRE4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Channel Count 4 channels 4 channels 4 channels 4 channels
Switch Configuration 2:1 SPDT 2:1 SPDT 2:1 SPDT 2:1 SPDT
Enable Architecture Single common switch-enable input Single common switch-enable input Single common switch-enable input Single common switch-enable input

Key Differentiators

  • Four video channels integrated in one switch (vs TS3V330DR)
  • Common control simplifies synchronized routing (vs TS3V330DE4)
  • Direct 16-pin SOIC compatibility (vs TS3V330DRE4)

Design Notes

Route the four video channels over a continuous ground plane and keep their traces short and similarly referenced. Avoid crossing long switch-output routes with unrelated high-current or high-speed digital paths. Place the 3.3 V bypass capacitor close to the supply pin and connect its ground return directly to the device ground. The 16-pin SOIC footprint provides limited pin-escape space, so planning the signal order before routing reduces loop area and simplifies impedance-controlled implementation.

Verify insertion loss, off-state isolation, bandwidth, and crosstalk for the complete path rather than treating the switch as an ideal routing element. Connector launches, protection components, source impedance, and cable length can materially affect video performance. Use matched source and load impedances where possible, and preserve the selected channel's reference path. These checks are especially important when the four channels carry related video, sync, or control signals that must remain aligned.

Do not assume that every TS3V330 ordering suffix is interchangeable without checking assembly requirements. TS3V330DR, TS3V330DE4, and TS3V330DRE4 are identified as pin-compatible alternatives, but reel configuration, marking, order quantity, and lifecycle details may differ. Also avoid changing the common enable state while downstream circuitry is sampling, because the transition interval can briefly place both switch paths in an uncertain state and create a visible transient.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The device is an industrial-temperature interface IC, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified in the cited product information. AEC-Q100 is not applicable to the standard TS3V330D ordering designation.

Data verified on: 2026-11-10 — data verified and curated by XAIPART's component engineering team

Related Searches

TS3V330D datasheet TS3V330D pinout TS3V330D datasheet pdf TS3V330D equivalent TS3V330D replacement TS3V330D cross reference TS3V330D vs TS3V330DR TS3V330D footprint TS3V330D price TS3V330D stock Texas Instruments TS3V330D TS3V330D 16-SOIC pinout TS3V330D video switch TS3V330D application circuit what is the best replacement for TS3V330D

Related Components & Terms

Texas Instruments TS3V330D TS3V330DR TS3V330DE4 TS3V330DRE4 video switch analog switch SPDT switch 2:1 multiplexer interface IC semiconductor wide-bandwidth video routing on-state resistance off-state isolation insertion loss switch-enable input 3.3 V 16-pin SOIC SOIC family surface-mount package video test equipment industrial inspection surveillance routing display equipment -40°C to +85°C
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details