TS3V330D - 4-Channel SPDT Video Switch | Texas Instruments
MPN: TS3V330D ✓ AktifTS3V330D Ringkasan
A video switch is an analog multiplexer or demultiplexer that routes one of two signal paths to a common output. The SPDT configuration supports source selection, signal swapping, and isolation between alternate inputs. In the system hierarchy, the TS3V330D belongs to the analog switch family, which falls under interface ICs and broader semiconductor signal-routing devices. Four integrated channels reduce component count when several video lines must be switched together.
The principal features of the TS3V330D include four independent 2:1 switch channels, a common single switch-enable input, a 3.3 V supply requirement, wide-bandwidth video switching, and low on-state resistance. The 16-SOIC package supports conventional surface-mount assembly. These characteristics make the device relevant to video test equipment, multimedia routing, projection systems, display processing, and industrial imaging designs where multiple source paths must be selected electronically.
The TS3V330D uses a single enable-control architecture rather than four separate control inputs. This simplifies command-line interfacing when all four channels must change state together. Its wide-bandwidth design is intended to preserve video signals while keeping conduction loss relatively low. Because a video switch is an analog device, signal integrity depends not only on on-state resistance but also on off-state isolation, channel matching, board-level parasitics, and the impedance of the source and destination circuitry.
Typical implementations include selecting between composite or component video inputs, routing test signals into an oscilloscope or video analyzer, switching cameras within surveillance equipment, and controlling auxiliary video paths in projection or display equipment. The common enable input also supports systems that need to mute or disconnect several video lines together. Firmware-controlled source selection is particularly practical when the same board must support several external connectors.
PCB layout should keep video traces short, provide a continuous ground reference, and place bypass capacitance close to the supply pin. Designers should verify the complete channel bandwidth, isolation, insertion loss, and crosstalk against the source impedance and cable length. The common enable signal should be controlled only after the selected input is stable, preventing transient switching artifacts from reaching downstream video circuitry.
This product page combines the device identity, package information, operating limits, confirmed cross-reference options, and practical design guidance for engineers evaluating the TS3V330D. It also distinguishes the core four-channel SPDT switching function from broader interface and signal-routing categories, making the component easier to compare with suitable video-switching designs.
Alternatif penggantian untuk TS3V330D — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
TS3V330DR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
TS3V330DE4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
TS3V330DRE4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
TS3V330D Rating Maksimal & Karakteristik Listrik
| Product Type | 4-channel 2:1 SPDT video switch |
| Number of Channels | 4 channels |
| Switch Configuration | 2:1 SPDT |
| Tegangan Pemuat | 3.3 V |
| Paket | 16-pin SOIC |
| Jumlah Pin | 16 pins |
| Rentang Suhu Kerja | -40°C to +85°C |
| Switch Enable Inputs | 1 common switch-enable input |
| Tipe Mounting | Surface mount |
TS3V330D 16-pin soic Diamant Konfigurasi Panduan
Konfigurasi pin untuk TS3V330D (16-pin soic pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk TS3V330D.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
TS3V330D cocok untuk 6 aplikasis: Video Source Selection, Video Test and Measurement, Industrial Inspection Systems, Surveillance Camera Routing, Display and Projection Equipment, Multimedia and Connectivity.
Video Source Selection
The TS3V330D is well suited to selecting between two analog video sources because it combines four 2:1 SPDT channels in one 16-pin SOIC. A receiver can route the selected inputs through the switch using a common enable signal rather than placing four separate single-channel devices on the board. The 3.3 V supply matches many digital video-processing systems, while wide-bandwidth operation and low on-state resistance help preserve the selected signal. This arrangement is useful in test equipment, multimedia inputs, and display systems that must present different sources through a shared downstream channel.
Direkomendasikan
Video Test and Measurement
The TS3V330D can route multiple video connections toward a common test path when an instrument needs to choose among several sources. Its four independent SPDT positions provide parallel routing while the common switch-enable input allows coordinated state changes. The 16-SOIC package keeps the implementation compact, and the -40°C to +85°C range supports laboratory and industrial test equipment. Engineers should preserve controlled return paths and verify the complete signal chain because connector launches and cable impedance can influence isolation and crosstalk.
Direkomendasikan
Industrial Inspection Systems
The TS3V330D fits industrial inspection equipment that alternates among camera or video-source paths. Four SPDT channels allow several related signals to change selection together, which can simplify synchronization in systems carrying video, sync, or associated control signals. Its 3.3 V operation integrates readily with modern embedded processing, and the -40°C to +85°C range covers many factory environments. The common enable input should be sequenced carefully so that the selected source has settled before downstream circuitry samples or displays the routed signal.
Direkomendasikan
Surveillance Camera Routing
The TS3V330D can support routing among multiple surveillance-video inputs in compact camera or monitoring equipment. Its four-channel 2:1 arrangement allows one output path to select between alternative sources without requiring four separate switch packages. The 3.3 V supply and 16-pin SOIC are appropriate for space-conscious electronics, while the wide-bandwidth design targets video signals. Layout should maintain a continuous ground plane, minimize long video loops, and account for protection-network capacitance that could degrade isolation or channel matching.
Direkomendasikan
Display and Projection Equipment
The TS3V330D is applicable to display and projection systems that must route one of two video inputs into a shared processing path. Four channels permit coordinated selection of video-related signals, while a single common enable input reduces control complexity. The 16-pin SOIC footprint supports compact board layouts, and the 3.3 V supply integrates with contemporary display controllers. To preserve signal quality, route video lines over continuous ground planes, keep bypass capacitance close to the supply connection, and verify connector and cable behavior across the intended video bandwidth.
Direkomendasikan
Multimedia and Connectivity
The TS3V330D can provide compact analog switching in multimedia panels, docking products, and connectivity modules that offer selectable video inputs. Four 2:1 channels reduce the footprint required for multiple route selections, and the common enable input supports coordinated switching through one control signal. The 3.3 V supply is practical for portable and embedded equipment, while the -40°C to +85°C range supports industrial variants. Firmware should avoid changing the route while downstream devices are active if transient artifacts would be visible or misinterpreted.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk TS3V330D — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | TS3V330DR | TS3V330DE4 | TS3V330DRE4 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Channel Count | 4 channels | 4 channels | 4 channels | 4 channels |
| Switch Configuration | 2:1 SPDT | 2:1 SPDT | 2:1 SPDT | 2:1 SPDT |
| Enable Architecture | Single common switch-enable input | Single common switch-enable input | Single common switch-enable input | Single common switch-enable input |
Diferensiator Kunci
- Four video channels integrated in one switch (vsTS3V330DR)
- Common control simplifies synchronized routing (vsTS3V330DE4)
- Direct 16-pin SOIC compatibility (vsTS3V330DRE4)
Catatan Desain
Route the four video channels over a continuous ground plane and keep their traces short and similarly referenced. Avoid crossing long switch-output routes with unrelated high-current or high-speed digital paths. Place the 3.3 V bypass capacitor close to the supply pin and connect its ground return directly to the device ground. The 16-pin SOIC footprint provides limited pin-escape space, so planning the signal order before routing reduces loop area and simplifies impedance-controlled implementation.
Verify insertion loss, off-state isolation, bandwidth, and crosstalk for the complete path rather than treating the switch as an ideal routing element. Connector launches, protection components, source impedance, and cable length can materially affect video performance. Use matched source and load impedances where possible, and preserve the selected channel's reference path. These checks are especially important when the four channels carry related video, sync, or control signals that must remain aligned.
Do not assume that every TS3V330 ordering suffix is interchangeable without checking assembly requirements. TS3V330DR, TS3V330DE4, and TS3V330DRE4 are identified as pin-compatible alternatives, but reel configuration, marking, order quantity, and lifecycle details may differ. Also avoid changing the common enable state while downstream circuitry is sampling, because the transition interval can briefly place both switch paths in an uncertain state and create a visible transient.
Informasi Konformitas
The device is an industrial-temperature interface IC, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified in the cited product information. AEC-Q100 is not applicable to the standard TS3V330D ordering designation.