Cirrus Logic Inc.

WM8770SIFT/RV - 24-Bit 8-Channel Audio Codec | Cirrus Logic

MPN: WM8770SIFT/RV ✗ End of Life
2.7 V to 3.6 V Vdss 64-TQFP, 10 mm x 10 mm Package
MOQ: 1 |

WM8770SIFT/RV Overview

The Cirrus Logic WM8770SIFT/RV is a 24-bit, eight-channel audio codec designed for surround-sound processing in home hi-fi, automotive, and audiovisual equipment. It supports operation up to 192 kHz, uses a serial data interface, and is packaged in a 64-pin TQFP measuring 10 mm by 10 mm. The codec combines one ADC with four DAC outputs for multichannel signal conversion and volume control.

An audio codec is an integrated-circuit category that converts digital audio data into analog signals, converts analog audio into digital data, and controls signal levels within an audio system. Within the broader hierarchy, the WM8770 belongs to the audio codec class, then to interface ICs, and ultimately to integrated circuits. It reduces the number of separate converters, amplifiers, and volume-control components required around a digital audio processor.

The WM8770 provides 24-bit resolution, eight-channel operation, and sampling rates up to 192 kHz. Its one ADC and four DAC arrangement supports designs in which multiple analog outputs require independent digital-to-analog conversion. Serial interface operation helps simplify connection to a digital signal processor or audio host while reducing parallel routing requirements. Its 2.7 V to 3.6 V operating range supports common low-voltage digital audio systems.

Technically, the WM8770 integrates conversion and volume-control functions rather than requiring separate digital-to-analog converters for each output. The 10 mm by 10 mm TQFP provides a surface-mount solution with 64 package leads. The WM8770SIFT/RV ordering suffix identifies a specific reel-packaged device configuration, while the underlying WM8770 family is associated with surround-sound and high-performance multichannel audio applications.

Typical uses include home theater receiver back ends, surround-sound decoding systems, automotive head-unit audio paths, digital television equipment, and powered speakers with centralized volume control. The eight-channel codec architecture is particularly useful where a system processes multiple surround channels but does not require a separate conversion IC for every analog output.

Board design should follow the manufacturer pin-description table when assigning power, ground, analog, digital, and interface connections. Pay particular attention to analog and digital ground partitioning, decoupling placement, and the layout of audio input and output traces. Stable reference, clock, and supply arrangements are especially important when maximizing the codec's 24-bit, 192 kHz operating capability.

This page combines the exact package and codec characteristics with practical design guidance, same-footprint replacement analysis, and a parameter-level comparison. It is intended to help engineers identify whether the WM8770SIFT/RV matches an existing audio architecture and what must be checked before approving a board substitution.

Drop-in alternatives for WM8770SIFT/RV — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

WM8770SIFT/V

✅ Drop-In
Cirrus Logic Inc.
📦 64-TQFP (10x10)
8-channel audio codec · 24 bit · 192 kHz · 8 channels · Stereo 24-bit multibit sigma-delta ADC · Digital volume control · Serial audio interface · Surround-sound processing

Contact for price

View Datasheet →

WM8770SIFT

✅ Drop-In
📦 64-TQFP (10x10)
Base WM8770 ordering code with the same 24-bit, 8-channel codec ratings and 64-TQFP family footprint; the /RV suffix is absent, with 0% difference in the documented core specifications.

📋 Reference alternative (not in catalog)

WM8770SIFT/RV Maximum Ratings & Electrical Characteristics

Product Type Multichannel audio codec
ADC Resolution 24 bit
DAC Resolution 24 bit
Maximum Sampling Rate 192 kHz
Number of Channels 8 channels
Number of ADCs 1 ADC
Number of DACs 4 DACs
Data Interface Serial
Operating Voltage Range 2.7 V to 3.6 V
Output Type Standard
Package 64-TQFP, 10 mm x 10 mm
Mounting Type Surface mount
Packaging Type Tape and reel
Functional Application Audio codec

WM8770SIFT/RV 64-tqfp, 10 mm x 10 mm Pin Configuration Guide

Pin configuration for WM8770SIFT/RV (64-tqfp, 10 mm x 10 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

64-tqfp, 10 mm x 10 mm package pinout diagram for WM8770SIFT/RV

No detailed pinout data available for WM8770SIFT/RV.

Refer to the datasheet for full pin configuration.

Typical Applications

WM8770SIFT/RV is suitable for 6 applications: Home Theater Receiver Audio Back End, Automotive Head-Unit Audio Path, Powered Speaker Network, Digital Television Audio Processing, Surround-Sound Decoder System, Professional Audio Monitoring Interface.

🎧

Home Theater Receiver Audio Back End

The WM8770SIFT/RV fits a home-theater back end that must convert multiple surround-sound channels while providing centralized volume control. Its eight-channel architecture, four DACs, 24-bit resolution, and support for rates up to 192 kHz suit high-resolution receiver designs. The codec can sit between a digital audio processor and the receiver's line-level amplifier inputs, reducing the number of separate conversion devices. The 64-TQFP surface-mount package supports compact receiver boards, although analog routing must remain short and controlled. Confirm the exact supported digital format, clock architecture, and output topology in the manufacturer datasheet before finalizing signal paths.

🚗

Automotive Head-Unit Audio Path

The WM8770SIFT/RV can serve as the conversion and volume-control element in a multichannel automotive head unit. Its 24-bit, eight-channel architecture supports surround or theater-style passenger-zone audio, while four DACs can feed external amplifier stages. The 2.7 V to 3.6 V operating range fits a 3.3 V audio domain, and the 64-TQFP package provides a surface-mount implementation. Automotive deployment requires separate confirmation of temperature grade, qualification, supply availability, and electromagnetic requirements. Ground partitioning and clock routing should follow the manufacturer reference layout rather than treating this as a generic consumer codec.

🔊

Powered Speaker Network

The WM8770SIFT/RV is suitable for a powered-speaker network requiring several independently controlled analog outputs from one digital audio source. Four integrated DACs provide the conversion channels, while the codec's eight-channel organization supports broader multichannel system configurations. A digital host can deliver serial audio data for decoding and volume control, reducing the need for a separate digital-to-analog converter in every speaker channel. The principal design trade-off is the one-ADC limitation for systems that also require multiple simultaneous analog inputs. Use the 10 mm by 10 mm TQFP footprint to plan compact speaker-controller boards and maintain short analog output routes.

📺

Digital Television Audio Processing

The WM8770SIFT/RV can support the audio back end of a digital television or audiovisual processor requiring high-resolution multichannel decoding. The 24-bit conversion capability and maximum 192 kHz operation provide useful headroom for high-resolution source material, while the serial interface supports connection to a digital video processor. One ADC is available for analog capture or monitoring, and four DACs can provide controlled analog outputs to amplifiers or line-level stages. Layout should isolate codec clocking and digital data from the audio outputs, especially where fan or switching regulators are nearby. Confirm the television board's expected channel count and interface format before committing the footprint.

🔊

Surround-Sound Decoder System

The WM8770SIFT/RV is explicitly suited to surround-sound processing because it combines eight-channel organization with 24-bit conversion and rates up to 192 kHz. In a decoder design, it can accept decoded serial audio and provide four DAC outputs with integrated volume-control functions for downstream amplifiers. This integration may simplify a board compared with four isolated converters, but it also concentrates conversion and control functions in one device. Validation should include channel mapping, mute behavior, clock stability, and full-scale output measurements. The 64-TQFP package has sufficient lead count for the power, digital interface, analog, and control requirements.

🖥️

Professional Audio Monitoring Interface

The WM8770SIFT/RV may be used in a monitoring interface where a digital host requires multiple controlled analog outputs and one analog capture path. Its 24-bit DACs support high-resolution playback, and the one ADC supports a line-level monitoring input when the electrical interface is configured appropriately. The codec's 192 kHz maximum rate is useful for high-resolution monitoring workflows, although actual host and clock support must match. Use careful analog grounding and short output routing to avoid introducing channel-to-channel noise. The fixed 64-TQFP footprint makes connector placement and thermal planning straightforward compared with an irregular package.

Where can I buy WM8770SIFT/RV?
The WM8770SIFT/RV can be requested through the Request a Quote form on this page. The exact ordering code is WM8770SIFT/RV, which identifies the Cirrus Logic 64-TQFP audio codec in its specified tape-and-reel configuration. Because this is an older codec family, current stock, minimum order quantity, and production allocation should be confirmed before a new design release. The manufacturer datasheet describes the device as an eight-channel, 24-bit codec intended for home hi-fi, automotive, and audiovisual applications.
What is the price of WM8770SIFT/RV?
Use the Request a Quote form on this page for the current price, stock, and order terms for WM8770SIFT/RV. Static pricing is not published here because availability and procurement terms can change for older specialty audio codecs. The component is identified by the complete ordering code WM8770SIFT/RV and is a 64-TQFP, surface-mount device. A quotation should confirm the tape-and-reel configuration, quantity, delivery schedule, and whether any authorized new-old-stock material is being proposed.
What is the lead time for WM8770SIFT/RV?
The current lead time for WM8770SIFT/RV should be requested through the Request a Quote form on this page. The device is an older 24-bit, eight-channel audio codec with a 64-TQFP package, so lead time depends on remaining inventory and acceptable sourcing conditions. Buyers should provide the required quantity, annual usage, target delivery date, and packaging requirements when requesting the quotation. Do not approve a schedule solely from generic catalog information, because obsolete or mature codec inventory can change between individual supply batches.
Is WM8770SIFT/RV in stock?
Stock for WM8770SIFT/RV must be confirmed through the Request a Quote form on this page. The manufacturer datasheet identifies the WM8770 as a high-performance, multichannel audio codec, while the /RV ordering code identifies the specific 64-TQFP tape-and-reel configuration. Since this mature component may be supplied from limited inventory, the quotation should state the available quantity and condition rather than merely indicating that the part is available. Technical acceptance should also include lot traceability and inspection requirements.
What are the key specifications of WM8770SIFT/RV that engineers should know?
The WM8770SIFT/RV is a 24-bit, eight-channel serial-interface audio codec with one ADC, four DACs, operation up to 192 kHz, and a 2.7 V to 3.6 V supply range. It is supplied in a surface-mount 64-TQFP measuring 10 mm by 10 mm. According to the manufacturer datasheet, the device targets high-performance surround-sound processing in home hi-fi, automotive, and audiovisual equipment. The converter count and package size are the most important constraints when confirming board compatibility.
What is the operating voltage of WM8770SIFT/RV?
The WM8770SIFT/RV operates from 2.7 V to 3.6 V. This low-voltage range is appropriate for systems whose digital audio processor and codec interface use a 3.3 V supply domain. The manufacturer datasheet should be consulted for the permitted tolerances, analog and digital supply relationships, and sequencing requirements that apply to each supply pin. The 2.7 V to 3.6 V range should be treated as the core operating range, not as permission to use unregulated 5 V or 1.8 V rails.
What is the resolution and maximum sample rate of WM8770SIFT/RV?
The WM8770SIFT/RV provides 24-bit conversion and supports sample rates up to 192 kHz. The manufacturer describes the WM8770 family as a high-performance, eight-channel codec for surround-sound processing. These figures make it suitable for high-resolution multichannel audio paths, including home theater and automotive entertainment systems. The 192 kHz figure describes the codec capability, while the achievable signal quality and supported modes still depend on the selected digital interface configuration, clocking, analog circuitry, and power implementation.
Where to download the WM8770SIFT/RV datasheet PDF?
The WM8770SIFT datasheet is available through the product-data link on this page, while the WM8770SIFT/RV ordering information is shown by the manufacturer and distributor product references. The document identifies a 24-bit, 192 kHz, eight-channel codec with one ADC and four DACs in a 64-TQFP package. Use the datasheet's pin-description table, electrical characteristics, and application information when evaluating an existing design. Confirm that the document revision corresponds to the intended WM8770 device variant before releasing a replacement.
Where can I find the WM8770SIFT/RV pinout?
The WM8770SIFT/RV pinout is found in the pin-description table of the manufacturer WM8770 datasheet. The component uses a 64-pin TQFP package measuring 10 mm by 10 mm. Use that table when assigning analog inputs, DAC outputs, digital audio data, clock signals, control pins, supply rails, and grounds. Because no manufacturer-controlled pinout diagram is included in the product record, a complete numbered pin list is not asserted here; verify every connection directly against the applicable datasheet revision.
WM8770SIFT/RV vs WM8770SIFT/V - which is better for a new design?
WM8770SIFT/RV and WM8770SIFT/V identify ordering configurations of the same WM8770 24-bit, eight-channel codec family, but procurement conditions and suffix details should be checked before treating them as interchangeable. Both appear in product listings for the same 64-TQFP codec family, which supports footprint reuse at the package level. A new design should follow the exact suffix definitions in the manufacturer ordering information and confirm supply status rather than selecting a part number only from its functional description.
Can WM8770SIFT/V replace WM8770SIFT/RV?
WM8770SIFT/V can be considered as a same-family replacement candidate for WM8770SIFT/RV because both identify WM8770 codec variants associated with the same 64-TQFP footprint and functional architecture. Before substitution, verify the manufacturer's suffix definitions, reel orientation, moisture requirements, and procurement status for the exact ordered part. The WM8770 offers 24-bit resolution, eight channels, one ADC, four DACs, and operation up to 192 kHz. The substitution is not complete until electrical and mechanical checks pass.
When should I choose WM8770SIFT/RV instead of a generic audio codec?
Choose WM8770SIFT/RV when an existing design specifically uses the WM8770 interface, pin assignment, clocking scheme, and analog routing. Its defining attributes are 24-bit resolution, eight-channel operation, one ADC, four DACs, serial data, and support up to 192 kHz in a 64-TQFP package. A different codec may offer a simpler converter count or lower cost, but it can require pinout, software, and analog-circuit changes. This part is most appropriate when continuity with the established WM8770 platform matters.
What can replace WM8770SIFT/RV?
The closest documented replacement candidates are WM8770SIFT and WM8770SIFT/V because they belong to the same WM8770 codec family and are listed with the same 64-TQFP form. These are same-family choices, not a broad cross-brand substitute list. The manufacturer datasheet and ordering information should be checked for exact pin, suffix, and supply compatibility. For any proposed cross-brand device, verify the pinout, serial audio format, clocking, ADC and DAC counts, supply voltage, and analog performance rather than relying only on the channel count.
Is the WM8770SIFT/RV suitable for home theater and automotive audio?
Yes, the WM8770SIFT/RV is suitable for home-theater and automotive audio architectures when the system operates within the device's electrical and thermal limits. The manufacturer specifically identifies the codec for high-performance surround-sound processing in home hi-fi, automotive, and audiovisual equipment. Its eight channels, four DACs, 24-bit resolution, and 192 kHz maximum rate support high-resolution multichannel designs. Automotive qualification and temperature requirements must be checked separately because the orderable suffix and grade documentation govern that decision.
How should the WM8770SIFT/RV be decoupled and laid out?
Place the required supply and reference decoupling capacitors directly at their associated WM8770SIFT/RV pins, following the manufacturer datasheet values and application diagram. Route analog audio signals away from digital clock and serial-data paths, and maintain the recommended separation between analog and digital grounding. Because the codec supports operation up to 192 kHz, high-frequency supply impedance and clock jitter can affect performance. Use the shortest practical ground-return paths and keep switching-node copper away from the analog input and DAC output region.

Engineering reference data for WM8770SIFT/RV — comparison, design guidance, and compliance information.

Selection Guide

Choose WM8770SIFT/RV when maintaining an existing WM8770-based design and the exact /RV ordering configuration is acceptable for procurement. Its 24-bit resolution, eight-channel organization, one ADC, four DACs, serial interface, and 192 kHz maximum rate suit home-theater, automotive, and audiovisual back ends. WM8770SIFT/V is the closest same-family alternative when that suffix is the preferred orderable configuration; the documented core codec ratings and 64-TQFP footprint remain the same. WM8770SIFT is another same-family choice with matching core ratings, but its suffix, reel orientation, grade, and supply terms require confirmation. Neither is a cross-brand substitute. For a new multichannel product, evaluate whether one ADC meets every analog-capture requirement, whether four DAC outputs cover the amplifier count, and whether the legacy supply and lifecycle situation is acceptable for the intended production life.

Comparison with Alternatives

Parameter This Product WM8770SIFT/V WM8770SIFT
Brand Cirrus Logic Cirrus Logic Cirrus Logic
Package 64-TQFP (10x10) 64-TQFP (10x10) 64-TQFP (10x10)
ADC Resolution 24 bit 24 bit 24 bit
DAC Resolution 24 bit 24 bit 24 bit
Maximum Sampling Rate 192 kHz 192 kHz 192 kHz
Number of Channels 8 channels 8 channels 8 channels
ADC and DAC Count 1 ADC / 4 DACs 1 ADC / 4 DACs 1 ADC / 4 DACs
Data Interface Serial Serial Serial
Operating Voltage Range 2.7 V to 3.6 V 2.7 V to 3.6 V 2.7 V to 3.6 V
Mounting Type Surface mount Surface mount Surface mount

Key Differentiators

  • Matches the established WM8770 converter and channel configuration (vs WM8770SIFT/V)
  • Preserves the 64-TQFP board footprint for WM8770-based designs (vs WM8770SIFT)
  • Combines conversion and volume-control functions in one codec (vs WM8770SIFT/V)
  • Supports high-resolution multichannel audio formats (vs WM8770SIFT)

Design Notes

Place the manufacturer-recommended input, output, and reference decoupling capacitors adjacent to their associated WM8770 pins, with short and low-inductance ground returns. Keep the 64-TQFP footprint compatible with the existing board and verify pin 1 orientation before assembly. Analog input and DAC output traces should be routed away from serial data, clock, and switching-regulator nodes; this separation is particularly important when the codec is operated at rates up to 192 kHz.

Use the manufacturer application diagram as the basis for analog and digital ground partitioning rather than merging every return under the component. Analog output traces should be short, appropriately impedance-controlled, and terminated according to the downstream amplifier input architecture. Clock and serial-data routing should be concise and referenced to a stable ground plane, while switching components and their high-current paths should remain outside the sensitive audio region. These steps reduce ground bounce and coupling into the four DAC outputs.

Verify that every supply rail remains within the codec's 2.7 V to 3.6 V operating range under startup, full-scale audio, and bus activity. The 3.3 V rail should have adequate local energy storage for simultaneous digital traffic and four DAC outputs. Follow the manufacturer limits for analog and digital supply sequencing, and avoid using the codec outputs to power external loads. If supply noise appears at the audio outputs, verify grounding, reference stability, and clock jitter before attributing the issue to the codec itself.

Do not treat the /RV ordering suffix as electrically interchangeable without checking the manufacturer's ordering table and assembly orientation. A footprint match alone does not resolve differences in reel orientation, moisture handling, temperature grade, or procurement status. Before substitution, compare the complete suffix definition, pin assignment, supply limits, clock requirements, serial format, and conversion-channel mapping. For a legacy design, also perform channel-by-channel audio tests after replacement rather than relying only on successful digital communication.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.

Related Searches

WM8770SIFT/RV datasheet WM8770SIFT/RV pinout WM8770SIFT/RV datasheet pdf WM8770SIFT/RV 64-TQFP WM8770SIFT/RV replacement WM8770SIFT/RV equivalent WM8770SIFT/RV audio codec WM8770SIFT/RV application circuit WM8770SIFT/RV price WM8770SIFT/RV stock Cirrus Logic WM8770SIFT/RV WM8770SIFT/RV vs WM8770SIFT/V

Related Components & Terms

Cirrus Logic WM8770SIFT/RV WM8770SIFT/V WM8770SIFT WM8770 audio codec codec IC audio interface analog-to-digital converter ADC digital-to-analog converter DAC 24-bit resolution 192 kHz sampling rate serial audio interface 64-TQFP TQFP package family surface mount SMD home theater automotive audio surround-sound processing home hi-fi audiovisual equipment volume control
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details