WM8770SIFT/RV - 24-Bit 8-Channel Audio Codec | Cirrus Logic
MPN: WM8770SIFT/RV ✗ پایان تولیدWM8770SIFT/RV نمای کلی
An audio codec is an integrated-circuit category that converts digital audio data into analog signals, converts analog audio into digital data, and controls signal levels within an audio system. Within the broader hierarchy, the WM8770 belongs to the audio codec class, then to interface ICs, and ultimately to integrated circuits. It reduces the number of separate converters, amplifiers, and volume-control components required around a digital audio processor.
The WM8770 provides 24-bit resolution, eight-channel operation, and sampling rates up to 192 kHz. Its one ADC and four DAC arrangement supports designs in which multiple analog outputs require independent digital-to-analog conversion. Serial interface operation helps simplify connection to a digital signal processor or audio host while reducing parallel routing requirements. Its 2.7 V to 3.6 V operating range supports common low-voltage digital audio systems.
Technically, the WM8770 integrates conversion and volume-control functions rather than requiring separate digital-to-analog converters for each output. The 10 mm by 10 mm TQFP provides a surface-mount solution with 64 package leads. The WM8770SIFT/RV ordering suffix identifies a specific reel-packaged device configuration, while the underlying WM8770 family is associated with surround-sound and high-performance multichannel audio applications.
Typical uses include home theater receiver back ends, surround-sound decoding systems, automotive head-unit audio paths, digital television equipment, and powered speakers with centralized volume control. The eight-channel codec architecture is particularly useful where a system processes multiple surround channels but does not require a separate conversion IC for every analog output.
Board design should follow the manufacturer pin-description table when assigning power, ground, analog, digital, and interface connections. Pay particular attention to analog and digital ground partitioning, decoupling placement, and the layout of audio input and output traces. Stable reference, clock, and supply arrangements are especially important when maximizing the codec's 24-bit, 192 kHz operating capability.
This page combines the exact package and codec characteristics with practical design guidance, same-footprint replacement analysis, and a parameter-level comparison. It is intended to help engineers identify whether the WM8770SIFT/RV matches an existing audio architecture and what must be checked before approving a board substitution.
جایگزینهای drop-in برای WM8770SIFT/RV — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
WM8770SIFT/V
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←WM8770SIFT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
WM8770SIFT/RV حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Multichannel audio codec |
| ADC Resolution | 24 bit |
| DAC Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Number of Channels | 8 channels |
| Number of ADCs | 1 ADC |
| Number of DACs | 4 DACs |
| Data Interface | Serial |
| Operating Voltage Range | 2.7 V to 3.6 V |
| نوع خروجی | Standard |
| بستهبندی | 64-TQFP, 10 mm x 10 mm |
| نوع نصب | Surface mount |
| Packaging Type | Tape and reel |
| Functional Application | Audio codec |
راهنمای پیکربندی پین WM8770SIFT/RV 64-tqfp, 10 mm x 10 mm
پیکربندی پین برای WM8770SIFT/RV (پکیج 64-tqfp, 10 mm x 10 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای WM8770SIFT/RV.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
WM8770SIFT/RV مناسب است برای 6 کاربردs: Home Theater Receiver Audio Back End, Automotive Head-Unit Audio Path, Powered Speaker Network, Digital Television Audio Processing, Surround-Sound Decoder System, Professional Audio Monitoring Interface.
Home Theater Receiver Audio Back End
The WM8770SIFT/RV fits a home-theater back end that must convert multiple surround-sound channels while providing centralized volume control. Its eight-channel architecture, four DACs, 24-bit resolution, and support for rates up to 192 kHz suit high-resolution receiver designs. The codec can sit between a digital audio processor and the receiver's line-level amplifier inputs, reducing the number of separate conversion devices. The 64-TQFP surface-mount package supports compact receiver boards, although analog routing must remain short and controlled. Confirm the exact supported digital format, clock architecture, and output topology in the manufacturer datasheet before finalizing signal paths.
پیشنهادی
Automotive Head-Unit Audio Path
The WM8770SIFT/RV can serve as the conversion and volume-control element in a multichannel automotive head unit. Its 24-bit, eight-channel architecture supports surround or theater-style passenger-zone audio, while four DACs can feed external amplifier stages. The 2.7 V to 3.6 V operating range fits a 3.3 V audio domain, and the 64-TQFP package provides a surface-mount implementation. Automotive deployment requires separate confirmation of temperature grade, qualification, supply availability, and electromagnetic requirements. Ground partitioning and clock routing should follow the manufacturer reference layout rather than treating this as a generic consumer codec.
پیشنهادی
Powered Speaker Network
The WM8770SIFT/RV is suitable for a powered-speaker network requiring several independently controlled analog outputs from one digital audio source. Four integrated DACs provide the conversion channels, while the codec's eight-channel organization supports broader multichannel system configurations. A digital host can deliver serial audio data for decoding and volume control, reducing the need for a separate digital-to-analog converter in every speaker channel. The principal design trade-off is the one-ADC limitation for systems that also require multiple simultaneous analog inputs. Use the 10 mm by 10 mm TQFP footprint to plan compact speaker-controller boards and maintain short analog output routes.
پیشنهادی
Digital Television Audio Processing
The WM8770SIFT/RV can support the audio back end of a digital television or audiovisual processor requiring high-resolution multichannel decoding. The 24-bit conversion capability and maximum 192 kHz operation provide useful headroom for high-resolution source material, while the serial interface supports connection to a digital video processor. One ADC is available for analog capture or monitoring, and four DACs can provide controlled analog outputs to amplifiers or line-level stages. Layout should isolate codec clocking and digital data from the audio outputs, especially where fan or switching regulators are nearby. Confirm the television board's expected channel count and interface format before committing the footprint.
پیشنهادی
Surround-Sound Decoder System
The WM8770SIFT/RV is explicitly suited to surround-sound processing because it combines eight-channel organization with 24-bit conversion and rates up to 192 kHz. In a decoder design, it can accept decoded serial audio and provide four DAC outputs with integrated volume-control functions for downstream amplifiers. This integration may simplify a board compared with four isolated converters, but it also concentrates conversion and control functions in one device. Validation should include channel mapping, mute behavior, clock stability, and full-scale output measurements. The 64-TQFP package has sufficient lead count for the power, digital interface, analog, and control requirements.
پیشنهادی
Professional Audio Monitoring Interface
The WM8770SIFT/RV may be used in a monitoring interface where a digital host requires multiple controlled analog outputs and one analog capture path. Its 24-bit DACs support high-resolution playback, and the one ADC supports a line-level monitoring input when the electrical interface is configured appropriately. The codec's 192 kHz maximum rate is useful for high-resolution monitoring workflows, although actual host and clock support must match. Use careful analog grounding and short output routing to avoid introducing channel-to-channel noise. The fixed 64-TQFP footprint makes connector placement and thermal planning straightforward compared with an irregular package.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای WM8770SIFT/RV — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | WM8770SIFT/V | WM8770SIFT |
|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) |
| ADC Resolution | 24 bit | 24 bit | 24 bit |
| DAC Resolution | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz | 192 kHz |
| Number of Channels | 8 channels | 8 channels | 8 channels |
| ADC and DAC Count | 1 ADC / 4 DACs | 1 ADC / 4 DACs | 1 ADC / 4 DACs |
| Data Interface | Serial | Serial | Serial |
| Operating Voltage Range | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Mounting Type | Surface mount | Surface mount | Surface mount |
تفاوتهای کلیدی
- Matches the established WM8770 converter and channel configuration (در مقابلWM8770SIFT/V)
- Preserves the 64-TQFP board footprint for WM8770-based designs (در مقابلWM8770SIFT)
- Combines conversion and volume-control functions in one codec (در مقابلWM8770SIFT/V)
- Supports high-resolution multichannel audio formats (در مقابلWM8770SIFT)
یادداشتهای طراحی
Place the manufacturer-recommended input, output, and reference decoupling capacitors adjacent to their associated WM8770 pins, with short and low-inductance ground returns. Keep the 64-TQFP footprint compatible with the existing board and verify pin 1 orientation before assembly. Analog input and DAC output traces should be routed away from serial data, clock, and switching-regulator nodes; this separation is particularly important when the codec is operated at rates up to 192 kHz.
Use the manufacturer application diagram as the basis for analog and digital ground partitioning rather than merging every return under the component. Analog output traces should be short, appropriately impedance-controlled, and terminated according to the downstream amplifier input architecture. Clock and serial-data routing should be concise and referenced to a stable ground plane, while switching components and their high-current paths should remain outside the sensitive audio region. These steps reduce ground bounce and coupling into the four DAC outputs.
Verify that every supply rail remains within the codec's 2.7 V to 3.6 V operating range under startup, full-scale audio, and bus activity. The 3.3 V rail should have adequate local energy storage for simultaneous digital traffic and four DAC outputs. Follow the manufacturer limits for analog and digital supply sequencing, and avoid using the codec outputs to power external loads. If supply noise appears at the audio outputs, verify grounding, reference stability, and clock jitter before attributing the issue to the codec itself.
Do not treat the /RV ordering suffix as electrically interchangeable without checking the manufacturer's ordering table and assembly orientation. A footprint match alone does not resolve differences in reel orientation, moisture handling, temperature grade, or procurement status. Before substitution, compare the complete suffix definition, pin assignment, supply limits, clock requirements, serial format, and conversion-channel mapping. For a legacy design, also perform channel-by-channel audio tests after replacement rather than relying only on successful digital communication.
اطلاعات انطباق
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.