XC7Z045-1FBG676CES - 350K Zynq-7000 SoC | AMD
MPN: XC7Z045-1FBG676CES ✓ ActiveXC7Z045-1FBG676CES Overview
A Zynq-7000 SoC is a programmable system-on-chip that integrates an Arm application processing unit with FPGA programmable logic in one device. This SoC hierarchy combines an FPGA, an embedded microprocessor subsystem, programmable input/output, memory interfaces, and dedicated hardware accelerators. That integration permits software-controlled hardware functions to share one device instead of occupying separate processors and FPGAs.
The principal features of the XC7Z045 include 350,000 FPGA logic cells, a dual-core Arm Cortex-A9 MPCore configuration, CoreSight debugging, and a 676-pin FCBGA package measuring 27 x 27 mm. The -1 speed designation identifies the device speed grade, while the FBG package suffix identifies the package family and ball-grid arrangement used by the Zynq-7000 product line.
Architecturally, the Arm Cortex-A9 cores provide a 32-bit Arm Thumb-2 processing environment for operating systems, control logic, networking stacks, and application software. The Kintex-7 FPGA fabric supports hardware pipelines, parallel interfaces, image processing, and other time-critical logic. CoreSight provides integrated debug and trace facilities, making the device suitable for systems requiring coordinated software and hardware observability.
Typical applications include industrial machine vision, factory automation, networked control equipment, high-speed data acquisition, communications infrastructure, and embedded edge processing. The combination of 667 MHz Arm processing and 350,000 programmable logic cells is particularly useful when a control loop must interact directly with parallel sensors, high-throughput data paths, or custom hardware accelerators.
Designers should preserve the package-specific power, ground, decoupling, and ball-escape requirements of the 676-FCBGA platform. The 1.2 V and 3.3 V rails require correct sequencing and sufficient decoupling, while high-speed interfaces demand controlled routing and return paths. PCB layout, power delivery, and thermal design must be validated together because the SoC combines many high-performance subsystems in one compact package.
This page combines the verified device identity, package and performance characteristics, same-family drop-in alternatives, parameter comparisons, and practical design guidance into one engineering-focused reference for evaluating the XC7Z045-1FBG676CES.
Drop-in alternatives for XC7Z045-1FBG676CES — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC7Z045-1FBG676CES (same form factor and footprint) — differing in Device Type, FPGA Family, Package Dimensions, Processor Frequency, RoHS Status.
XC7Z045-1FBG676I
✅ Drop-InContact for price
View Datasheet →XC7Z045-1FBG676C
✅ Drop-InContact for price
View Datasheet →XC7Z045-1FFG676I
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XC7Z045-2FFG676I
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XC7Z045-2FBG676I
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XC7Z045-1FBG676CES Maximum Ratings & Electrical Characteristics
| Device Type | Zynq-7000 system on chip with FPGA fabric |
| Processor Cores | 2 Arm Cortex-A9 cores |
| Processor Architecture | 32-bit Arm Thumb-2 |
| Processor Frequency | 667 MHz |
| FPGA Family | Kintex-7 |
| Logic Cells | 350,000 cells |
| Debug Support | CoreSight |
| Supply Voltage | 1.2 V and 3.3 V |
| Package Type | 676-FCBGA |
| Package Dimensions | 27 x 27 mm |
| Pin Count | 676 pins |
| Mounting Type | Surface mount |
| Product Line | Zynq-7000 SoC |
| Speed Grade | -1 |
XC7Z045-1FBG676CES 27 x 27 mm Pin Configuration Guide
Pin configuration for XC7Z045-1FBG676CES (27 x 27 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC7Z045-1FBG676CES.
Refer to the datasheet for full pin configuration.
Typical Applications
XC7Z045-1FBG676CES is suitable for 6 applications: Industrial Machine Vision, High-Speed Data Acquisition, Industrial Automation Controller, Communications Infrastructure, Networked Edge Processing, Test and Measurement Equipment.
Industrial Machine Vision
The XC7Z045-1FBG676CES fits machine-vision controllers that must combine operating-system software with deterministic parallel image processing. The dual 667 MHz Arm Cortex-A9 cores can manage camera control, configuration, networking, and diagnostics, while the 350,000 Kintex-7 logic cells can accelerate pixel pipelines, thresholding, filtering, or interface conversion. Placing both functions in one 676-FCBGA device reduces inter-device data transfers compared with separate processor and FPGA implementations. The principal design considerations are synchronized sensor clocks, controlled escape routing from the BGA, adequate 1.2 V and 3.3 V rail decoupling, and thermal validation at the intended ambient temperature.
Recommended
High-Speed Data Acquisition
The XC7Z045-1FBG676CES is appropriate for acquisition systems that must move parallel sensor data rapidly while preserving a separate software-processing path. The 350,000 programmable logic cells can implement capture timing, channel interleaving, filtering, or data-format conversion, and the 667 MHz dual-core Arm subsystem can perform acquisition control and higher-level analysis. This division of labor is useful when deterministic hardware pipelines must coexist with networking or storage applications. Designers should define clock-domain boundaries carefully, use synchronized resets where required, and validate input timing against the selected I/O standards. Power planning must account for simultaneous FPGA and processor activity rather than estimating from idle conditions.
Recommended
Industrial Automation Controller
The XC7Z045-1FBG676CES can serve as a compact industrial automation controller because it integrates 667 MHz Arm processing with 350,000 programmable logic cells in one package. The Arm cores can run control software, communications protocols, and diagnostics, while the FPGA fabric can implement deterministic motor timing, encoder processing, or custom I/O logic. This architecture suits equipment requiring coordinated software and hardware control without two independent processors. Deployment decisions should include the required operating-temperature range, isolated communications, functional-safety obligations, and long-term device availability. Board-level validation should include worst-case utilization, simultaneous rail loading, thermal rise, and watchdog behavior during processor or fabric faults.
Recommended
Communications Infrastructure
The XC7Z045-1FBG676CES supports communications equipment that requires flexible packet handling, protocol adaptation, and embedded services. The dual Cortex-A9 cores can run network stacks, management software, or security functions, while the Kintex-7 fabric can implement custom packet classifiers, data-plane pipelines, and time-critical interfaces. Integrating these functions permits data to remain inside the device rather than traversing multiple external chips. The design must carefully constrain high-speed serial and parallel interfaces, provide continuous clocking and decoupling, and maintain power integrity across the 1.2 V and 3.3 V domains. Protocol-specific timing, maximum transceiver rate, environmental grade, and regulatory requirements must be confirmed from the relevant AMD device documentation.
Recommended
Networked Edge Processing
The XC7Z045-1FBG676CES is useful for edge systems that combine local decision-making with programmable data acceleration. The Arm subsystem can execute networking, application, and device-management software at 667 MHz, while 350,000 FPGA logic cells can accelerate filtering, compression, analytics, or sensor fusion. This heterogeneous arrangement reduces the latency of moving intermediate data between a general-purpose processor and a separate FPGA. For an edge deployment, engineers should evaluate idle and peak power, thermal performance in a sealed enclosure, secure boot and update requirements, and sustained memory or storage throughput. The exact temperature range and long-term sourcing plan should be confirmed before using the device in unattended industrial or outdoor equipment.
Recommended
Test and Measurement Equipment
The XC7Z045-1FBG676CES can implement a programmable measurement instrument by assigning real-time acquisition and sequencing to the FPGA fabric and instrument control to the dual Arm Cortex-A9 cores. The processor subsystem can manage calibration, data processing, user interfaces, and remote control, while the programmable logic can generate precise timing patterns or process high-rate input channels. Integrating both roles into one 676-FCBGA package helps minimize control latency and board area. Measurement accuracy still depends on the analog front end, reference sources, clock jitter, impedance-controlled routing, and calibration method. Thermal and power analysis should include continuous high-utilization operation because the visible specifications establish processor frequency and logic-cell count but not final system power dissipation.
Recommended
Recommended Products Summary
Engineering reference data for XC7Z045-1FBG676CES — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC7Z045-1FBG676I | XC7Z045-1FBG676C | XC7Z045-1FFG676I | XC7Z045-2FFG676I | XC7Z045-2FBG676I |
|---|---|---|---|---|---|---|
| Package | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA | 676-FCBGA | 676-FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Speed Grade | -1 | -1 | -1 | -1 | -2 | -2 |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
Key Differentiators
- Combines dual-core Arm processing and programmable logic in one device (vs XC7Z045-1FBG676I)
- Closest visible 676-FCBGA family options preserve the core processing architecture (vs XC7Z045-1FBG676C)
- Higher-speed family variants can serve timing-demanding designs (vs XC7Z045-2FBG676I)
- Integrated CoreSight visibility supports coordinated hardware and software debugging (vs XC7Z045-1FBG676I)
Design Notes
Design the 1.2 V and 3.3 V rails as independent, decoupled power domains and follow the AMD power-decoupling recommendations for the exact XC7Z045 package. Place the smallest ceramic capacitors directly beneath or as close as practical to their associated BGA power balls, then add bulk capacitance near the regulator outputs. Validate startup sequencing, voltage ramp limits, load-transient response, and worst-case processor-plus-FPGA utilization before fixing the power-supply ratings.
Use the manufacturer ball map and escape-routing guidance for the 676-FCBGA package rather than a generic BGA layout. Escape high-speed interfaces and clocks through the shortest practical paths, provide continuous reference-plane return routes, and avoid splits or stubs. Maintain controlled spacing between sensitive nets and high-current or fast-edge signals. Because no exact 676-ball package drawing is represented here, the AMD package files and pinout tables should govern every PCB-library entry.
Estimate thermal performance under the highest sustained processor, FPGA, memory-interface, and I/O activity expected in the finished system. The 676-FCBGA package has many power and ground balls, so their via-array design materially affects heat spreading and electrical performance. Use the package thermal model together with the PCB stackup, copper area, enclosure airflow, and actual junction-limit criteria. Do not infer thermal margin from the 667 MHz clock or 350,000 logic-cell count alone.
Do not approve a replacement solely because its MPN begins with XC7Z045. The speed grade, package suffix, commercial or temperature grade, and ordering configuration must all match the design requirements. The XC7Z045-1FBG676I and XC7Z045-1FBG676C are close candidates, but the complete ordering table remains necessary for an approved substitution. Review lifecycle, traceability, firmware compatibility, and any qualification obligations before releasing a replacement to production.
Separate synchronous processor, memory, FPGA, and high-speed I/O paths according to the AMD interface guidelines, and pay particular attention to clock jitter, return-path continuity, and simultaneous-switching noise. Keep clocks away from noisy power-regulator switches and noisy I/O return paths. Use source-synchronous routing rules and length matching from the manufacturer interface specifications rather than generic FPGA length-matching rules, because the integrated SoC contains multiple clock domains with different timing constraints.
Compliance Information
The manufacturer documentation confirms the Zynq-7000 SoC family and device identity, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established. AEC-Q100 is not applicable to this catalog position.