Placas e Módulos
Subcategorias
Produtos (235)
MIC23150-GYMT-EV - 2A 4MHz Buck Eval Board | Microchip
The Microchip Technology MIC23150-GYMT-EV is an evaluation board for the MIC23150-GYMT, a 2A, 4MHz synchronous PWM buck regulator with HyperLight Load mode, fitted with the regulator in an 8-pin MLF surface-mount package. The board lets engineers evaluate the MIC23150's full operating envelope, from 23uA quiescent-current light-load operation up to its 2A continuous output rating, with an input supply able to deliver more than 2A at 2.7V. A DC-DC buck regulator (step-down converter) is a switched-mode power conversion IC that reduces a higher input voltage to a lower output voltage using an inductor, a switching MOSFET stage, and an output capacitor. Within the power-management hierarchy, the MIC23150 sits in the point-of-load switching-regulator tier, below full power modules and above linear LDO regulators where efficiency matters. Key performance characteristics of the onboard MIC23150 include HyperLight Load architecture, which delivers very high efficiency at light loads and ultra-fast transient response, a 4MHz PWM switching frequency that permits a very small inductor down to 0.47uH, and an output capacitor as small as 2.2uF. This enables a total power solution under 1mm height, which is critical for space-constrained designs. Peak efficiency reaches 93% in continuous conduction mode, and output ripple remains very low across the entire load range. The HyperLight Load architecture blends PWM operation at heavy load with a proprietary mode at light load, avoiding the large ripple penalty of conventional pulse-skipping schemes while still slashing quiescent current to 23uA. This makes the part well suited for supplying processor core voltages that swing from sleep current to ampere-class bursts, with exceptionally small output voltage excursions during load transients. Typical evaluation scenarios include powering application processors and FPGAs with steep load steps, validating point-of-load rails in portable and battery-powered equipment, and characterizing efficiency and ripple in sub-1mm-height power stages for smartphones, tablets, and IoT devices. A key design consideration when using the board is that the input source must supply more than 2A at 2.7V, per the Microchip evaluation board user guide, and load testing can use either an active electronic load or a passive resistive load. This page adds value beyond the manufacturer datasheet by consolidating distributor sourcing links, evaluation-board usage guidance, and the chip-level specifications engineers need before committing to the MIC23150 design.
MM8108-EKH01-01-CAM - Wi-Fi HaLow Eval Kit | Morse Micro
The Morse Micro MM8108-EKH01-01-CAM is a Wi-Fi HaLow (IEEE 802.11ah) evaluation kit built on the Raspberry Pi 4 single-board computer, integrating the MM8108 Wi-Fi HaLow transceiver module operating in the 850 MHz to 950 MHz sub-GHz band, with a supplied camera module, enclosure, and RPi HAT for out-of-the-box long-range, low-power wireless evaluation. Wi-Fi HaLow is the IEEE 802.11ah sub-1 GHz extension of the Wi-Fi standard, designed for Internet of Things (IoT) connectivity where range, penetration, and power efficiency matter more than raw throughput. In the wireless hierarchy, it sits alongside Wi-Fi 6 and LoRa as a low-power WAN technology, but with native IP networking, higher data rates (the MM8108 supports up to 43.33 Mbps), and standard Wi-Fi security. This kit turns a Raspberry Pi 4B into a fully enclosed Wi-Fi HaLow access point, station, and router for testing long-range connectivity. Key platform features include the MM8108 802.11ah SoC with throughput up to 43.33 Mbps, operation across the 850 MHz to 950 MHz license-exempt sub-GHz spectrum, Linux-based software with out-of-the-box tooling, and a camera module enabling vision-based applications and edge intelligence experiments over HaLow links. The supplied enclosure makes the unit suitable for field trials, not just bench testing. Technically, the MM8108 is Morse Micro's second-generation Wi-Fi HaLow SoC, improving range and power efficiency over the earlier MM6108 (up to 32.3 Mbps). The Raspberry Pi HAT form factor connects via SDIO, and Morse Micro publishes the MMECH17 Design Package (schematics, PCB layouts, BOM) so engineers can port the HAT circuitry into their own products. Typical applications include long-range IP camera links, smart city and industrial IoT gateways, agricultural and campus-scale sensor networks, and connected building infrastructure. The camera variant specifically targets video-surveillance-over-HaLow proof of concepts. Design consideration: HaLow's sub-GHz band trades bandwidth for range; plan antenna placement and channel selection for your regulatory domain (regional sub-GHz rules vary) before field deployment. This page synthesizes distributor availability, same-family kit alternatives, and design guidance not found in the manufacturer product brief.
MM8108-EKH05-01 - Wi-Fi HaLow IoT Eval Kit | Morse Micro
The Morse Micro MM8108-EKH05-01 is an IEEE 802.11ah (Wi-Fi HaLow) evaluation kit covering 850 MHz to 950 MHz, built around the MM8108-MF15457 Wi-Fi HaLow module with an STM32U585 low-power microcontroller and a BlueNRG-M2 Bluetooth SoC. A Wi-Fi HaLow development platform is a hardware-plus-software toolchain that lets engineers prototype long-range, low-power sub-1 GHz wireless links before committing to custom PCBs. Wi-Fi HaLow (IEEE 802.11ah) operates in sub-1 GHz spectrum, trading raw throughput for roughly ten times the range and far lower power than 2.4 GHz Wi-Fi, making it a member of the low-power wide-area IoT connectivity family alongside LoRa and 802.15.4-based systems. Key features of this kit include the MM8108 single-chip 802.11ah SoC with radio, PHY and MAC integrated on one die, PHY rates up to 43.3 Mbps using 256-QAM modulation at 8 MHz bandwidth, and dual wireless stacks (Wi-Fi HaLow plus Bluetooth via the BlueNRG-M2). On-board sensors and expansion headers enable rapid prototyping of end nodes. According to the Morse Micro product brief, the MM8108-EKH05-01 is a fully integrated Wi-Fi HaLow development platform for a wide range of IoT applications. The board is supported out-of-the-box by the Morse Micro IoT SDK (platform mm-mm8108-ekh05), which uses the STM32U585VIT6Q MCU as the host processor, and a hardware design package with schematics, layout and BOM is available for custom hardware development. Typical applications include smart home devices, industrial automation systems, long-range low-power sensor networks, and Wi-Fi HaLow client development when paired with a Morse Micro access point. Developers can test long-range, low-power connectivity out of the box. Design consideration: evaluate the sub-1 GHz regulatory domain of your target market, since the 850-950 MHz operating window must match regional spectrum rules. This page synthesizes distributor availability data, Morse Micro SDK documentation, and drop-in platform comparisons not found in the manufacturer product brief.
MM8108-EKH19-01 - Wi-Fi HaLow Eval Kit | Morse Micro | 802.11ah
The Morse Micro MM8108-EKH19-01 is a Wi-Fi HaLow (IEEE 802.11ah) evaluation kit built around a USB 2.0 network adapter reference design based on the MM8108 System-on-Chip (SoC), supplied with an SMA Wi-Fi HaLow antenna and a Wi-Fi 6 GL-MT3000 router. The MM8108 SoC operates across the 850 MHz to 950 MHz sub-GHz HaLow bands and also covers 2.4 GHz and 5 GHz, supporting PHY rates up to 43.3 Mbps using 256-QAM modulation at 8 MHz bandwidth. An evaluation kit (evkit) is a pre-assembled hardware platform that lets engineers test, prototype, and validate a wireless or semiconductor device before committing to a custom PCB design. In the wireless development hierarchy, it sits above the bare SoC and below production hardware, typically including reference schematics, a reference antenna, and companion host hardware. Key features of the MM8108-EKH19-01 include the MM8108 SoC with integrated radio, PHY, and MAC fully compliant with IEEE 802.11ah; a USB 2.0 network adapter form factor that connects to any Windows computer without custom carrier hardware; transmit power up to 26 dBm through an external SMA antenna; and an included Wi-Fi 6 (GL-MT3000) travel router for demonstrating HaLow-to-Wi-Fi-6 bridging in real network scenarios. The underlying MM8108 SoC is a single-chip solution incorporating radio, PHY, and MAC functions compliant with the IEEE 802.11ah standard, delivering world-leading power efficiency and class-leading sub-GHz throughput. The kit is built on the RD09 reference design, and Morse Micro publishes the full RD09 Reference Design Package (schematics, layout files, and bill of materials) so customers can build compliant USB dongles or embed Wi-Fi HaLow connectivity directly into their own products. Typical applications include long-range, low-power IoT connectivity evaluation, smart city and industrial sensor networks, security cameras over sub-GHz links, and mesh networking trials using 802.11s. The kit demonstrates the simplicity and cost-effectiveness of adding Wi-Fi HaLow to an existing or new design using a USB 2.0 interface. Design consideration: community testing shows the EKH19 USB adapter supports channel bandwidths up to 2 MHz with auto channel selection, so interoperability testing with fixed 1 MHz-channel devices (for example MM6108-based EU 863-870 MHz products) should be planned carefully. This page synthesizes distributor pricing, equivalent-kit options, and practical deployment notes not found in the manufacturer product brief.
MSN3420-CB2FC - 48x25GbE + 12x100GbE ToR Switch | NVIDIA
The NVIDIA Mellanox MSN3420-CB2FC is a Spectrum-2 based 1U top-of-rack Open Ethernet switch system delivering 48 x 25GbE SFP28 ports (supporting 10/25GbE) and 12 x 100GbE QSFP28 ports (supporting 40/100GbE), managed, running Cumulus Linux, with two AC power supplies and a short-depth chassis. An Open Ethernet top-of-rack switch is a network switching platform that interconnects servers within a data center rack and uplinks them to the leaf or spine layer of a Layer-2/Layer-3 fabric. Within the data center network hierarchy, the ToR switch sits at the bottom of the leaf-spine topology, above server NICs and below aggregation switches, and is a critical element of any cloud, storage, or hyperconverged infrastructure. Key features include the second-generation Spectrum-2 ASIC with 6.4 Tb/s of bidirectional switching capacity, a full rack of 25GbE server connectivity, 100GbE uplink readiness for leaf-spine or super-spine deployment, and x86 CPU-based management. The -CB2FC configuration specifies back-to-front (C2P/P2C per configuration) airflow and dual AC power supplies for redundant operation, with a rail kit included for standard 19-inch rack mounting. Architecturally, the Spectrum-2 ASIC delivers consistent low latency and supports advanced software-defined networking features across Layer-2 and Layer-3 forwarding. Running NVIDIA Cumulus Linux, the platform exposes industry-standard Linux networking tools and automation interfaces, making it a natural fit for web-scale IT operations that manage fabrics through configuration-as-code pipelines rather than vendor-proprietary CLIs. Typical applications include leaf-spine data center fabrics migrating server access from 10GbE to 25GbE, cloud-scale Layer-2/Layer-3 networks, hyperconverged storage clusters, and data analytics back-end fabrics, where high port density and consistent low latency are decisive. When deploying, verify airflow direction (front-to-back versus back-to-front) matches your hot/cold aisle layout, and confirm 100GbE uplink breakout requirements (4x25G breakout cables) before ordering optics. This page synthesizes distributor pricing, drop-in alternatives, and practical deployment notes not found in the manufacturer datasheet.
NAFE13388-EVB - Evaluation Board for 24-bit 8-ch AFE | NXP
The NXP NAFE13388-EVB is an evaluation board for the NAFE13388, a highly configurable industrial-grade universal ±25 V 8-input low-power analog front-end (AFE) with excitation sources, 24-bit resolution and a PGA gain range of 0.2 V/V to 16 V/V. The board enables fast evaluation of high-precision multichannel data acquisition. An evaluation board (EVB) is a printed-circuit platform that lets engineers assess an integrated circuit without designing custom hardware. In the data-conversion hierarchy, it belongs to development tools supporting analog front-end ICs: the AFE chip, then the ADC signal chain, then the complete measurement system. EVBs typically expose all signal pins, jumpers for configuration, and connectors to a host controller. The NAFE13388-EVB is designed for the NAFExx388 family and connects to an NXP LPC54628 MCU board, allowing easy configuration and reading of measurement data through a dedicated PC GUI, per the NXP product page. This shortens the path from lab evaluation to production design. The underlying NAFE13388 provides 1 Gohm high input impedance and input leakage below 5 nA at 105 C, which, combined with its low-noise, low-offset-drift PGA, makes it well suited for precision temperature measurement with RTD and thermocouple sensors, according to the NXP datasheet (Rev. 4, 2 April 2024). The eight HV analog inputs can be configured from eight single-ended to four differential channels with AICOM or AGND reference. Typical evaluation scenarios include industrial sensor acquisition modules, battery test equipment, and building automation analog inputs. The integrated excitation sources support direct RTD and current-loop sensor evaluation. When evaluating, note that the AFE integrates diagnostics; the GUI exposes configuration registers, so review the datasheet register map before scripting automated tests. This page synthesizes distributor availability data, datasheet highlights, and practical evaluation guidance not consolidated in the manufacturer datasheet.
NAFE13388-UIM - 8-Channel Universal AFE Arduino Shield | NXP
The NXP Semiconductors NAFE13388-UIM is an 8-channel universal-input analog front-end (AFE) Arduino shield evaluation board for the industrial-grade NAFExx388 AFE family, supporting voltage inputs up to ±25 V with integrated excitation sources and low-power operation. An analog front-end (AFE) is the circuit stage that conditions and digitizes real-world analog signals - voltage, current, and temperature - before they reach a microcontroller or processor. Within the signal-chain hierarchy (sensor -> AFE -> MCU), the AFE performs input scaling, excitation, diagnostics, and precision conversion. Industrial-grade multichannel AFEs like the NAFE13388 consolidate what traditionally required discrete amplifiers, muxes, and ADCs into one configurable device. Key features of the UIM shield include eight universal high-voltage analog inputs configurable from eight single-ended to four differential channels, an industry-standard SPI-bus host interface, plug-and-play compatibility with NXP MCU boards featuring Arduino connectors (MCX-N and LPC series), and support for voltage, current, and temperature measurements including RTD and thermocouple sensing. The onboard NAFE13388 provides excitation sources for sensor applications and multiple integrated diagnostic features. Technically, the shield demonstrates a compact hardware design around the NAFE13388 and exposes enhanced software configurability through NXP's universal open-CMSIS driver packs. A public Arduino class library (AFE_NXP_Arduino) and NXP Application Code Hub examples running on the FRDM-MCXN947 accelerate firmware bring-up, with a graphical interface for exploring AFE functions. Typical applications include industrial programmable logic controller (PLC) analog input modules, building automation sensor front-ends, battery-management and process-control measurement nodes, and rapid prototyping of universal analog sensing systems. Design consideration: for proper voltage-level interfacing, the default 3.3 V supply pin on the Arduino connector may need to be removed so the UIM board supports 5 V signaling; some FRDM MCU boards require SPI pin modifications for connection. This page synthesizes distributor availability, evaluation-board context, software ecosystem details, and practical integration notes not consolidated in any single manufacturer document.
NAFE33352-EVB - Universal AIO-AFE Eval Board | NXP | Industrial
The NXP NAFE33352-EVB is an evaluation board for the NAFE33352, a software-configurable universal analog input and output (AIO) analog front-end (AFE) that meets the high-precision measurement and control requirements of industrial-grade applications. The board provides quick access to all NAFE33352 functions, including its 16/24-bit ADC, precision DAC output path, low-drift voltage reference, and readback channels (Vsense, Isense), allowing engineers to characterize analog performance before committing to PCB layout. An analog front-end (AFE) is the circuit stage that conditions real-world signals - voltages, currents, and resistive sensor outputs - before conversion to the digital domain. Within the signal-chain hierarchy (sensor -> AFE -> ADC/DAC -> MCU), the NAFE33352 collapses multiple discrete functions into one IC: a 14/16/18-bit DAC, a 16/24-bit ADC, a low-drift reference, buffers, and high-voltage capable I/O. The NAFEx3352 family features one analog input/output channel and two universal input channels, making it a universal AIO-AFE. The EVB pairs the NAFE33352 device with access points for the HVQFN-40 (6 mm x 6 mm) package signals, and works with the NXP graphical user interface described in user manual UM12180. When combined with an LPC54S018 MCU board loaded with custom firmware (offered separately as KITNAFE33352-EVB), the GUI can read back the part number and OTP register contents, configure channels in software, and stream measurement data. Typical use cases include evaluating RTD and thermistor temperature measurement (using current output plus voltage input to measure resistance), 4-20 mA style current-output loops, process-control analog I/O, and condition monitoring via the LVMUX path that digitizes external and internal signals. A key design consideration: the same EVB hardware is used for both NAFE33352 and NAFE93352 variants, differing only in the assembled device, so verify the populated device when interpreting measurements. This page synthesizes distributor availability, board-level alternatives, and practical evaluation guidance not consolidated in the NXP datasheet or user manual.
NAFE33352-UIOM - Universal AIO AFE Arduino Shield | NXP
The NXP NAFE33352-UIOM is a universal analog input/output (AIO) analog front-end (AFE) Arduino shield evaluation board designed for the NAFE33352, a highly configurable, industrial-grade universal AIO AFE. It also supports the NAFE33350, a highly configurable analog output AFE, and provides a deployment-ready platform for analog input and output applications. An analog front-end (AFE) is the circuit block that conditions real-world analog signals - voltages, currents, RTD and thermistor readings - before conversion to digital data, or generates analog outputs from digital commands. Within the signal-chain hierarchy, an AFE sits between sensors/actuators and the digital controller, encompassing amplifiers, filters, ADCs, DACs, and diagnostics. The NAFE33352-UIOM packages this complete signal chain on an Arduino-compatible expansion board. Key features include software configurability of the analog input/output channels, a readback path that measures voltage and current output (Vsense, Isense), and an LVMUX connection to the ADC for digitizing external and internal signals for condition monitoring. The combination of current output and voltage input enables resistance and temperature measurement using RTDs or thermistors, making the board suitable for industrial-grade measurement and control validation. Technically, the board enables compact hardware design and enhanced software configurability through the universal Open-Cortex Microcontroller Software Interface Standard (CMSIS) driver, allowing engineers to validate analog accuracy and diagnostics before committing to a production design. The underlying NAFE33352 device is a software-configurable universal low-power AIO-AFE family targeting high-precision industrial requirements. Typical applications include industrial sensor acquisition with RTDs and thermistors, 4-20 mA style analog output validation, and analog condition monitoring in factory automation and process control test setups. Design consideration: treat the board as a validation and prototyping platform - verify analog accuracy, diagnostics coverage, and software driver behavior against your end-system requirements before scaling the NAFE33352 into a custom PCB. This page synthesizes manufacturer product information, the NAFE33352 datasheet, the user manual UM12469, and distributor availability into practical evaluation guidance not found on any single source page.
NAFE93352-EVB - High-Speed AIO-AFE Eval Board | NXP Semiconductors
The NXP Semiconductors NAFE93352-EVB is an evaluation board for the NAFE93352, a software-configurable universal analog input and output (AIO) analog front-end (AFE) designed for high-precision, high-speed measurement and control in industrial-grade applications. An analog front-end (AFE) is the circuit stage between real-world sensors and actuators and a digital controller, conditioning, converting, and digitizing analog signals before processing. In the power-management hierarchy of an industrial system, the AFE sits between signal conditioning (amplifiers, filters) and the MCU or PLC backplane, translating raw voltage and current measurements into digital data for control loops. The underlying NAFE93352 is a software-configurable universal I/O AFE whose channels can be programmed as voltage or current inputs and outputs, covering the diverse I/O module requirements of modern process control. NXP positions the NAFE93352 as the high-speed member of the family, while the NAFE33352 serves as the low-power version for battery-backed and density-optimized modules. Both target programmable logic controllers (PLC), process control systems, industrial I/O modules, and data loggers. The NAFE93352-EVB lets engineers exercise these configurable channels, evaluate accuracy against industrial measurement requirements, and prototype analog I/O card designs before committing to custom PCB layouts. Software tooling from NXP supports configuration of channel modes and evaluation of measurement performance. Typical evaluation scenarios include 4-20 mA current-loop input/output emulation for process instrumentation, multi-channel voltage acquisition cards for PLCs, and data-logger front ends that must combine measurement accuracy with flexible channel configuration. When evaluating, budget for stable reference and supply rails on the bench, since AFE accuracy measurements are only as good as the external references and wiring quality used during testing. This page synthesizes distributor availability data, the manufacturer datasheet and product documentation, evaluation guidance, and same-family board alternatives in one place - information not consolidated in any single NXP document.
NB7W-TW00B-V1 - 7" TFT WVGA HMI Touchscreen | Omron | NB-V1 Series
The Omron NB7W-TW00B-V1 is a 7-inch WVGA programmable terminal (HMI) with an 800x480 TFT color touchscreen in the NB-V1 Series, designed as a direct successor to the original NB7W-TW00B. It features dual serial ports, a black bezel, and supports Omron NB-Designer v1.6.7.0 software for screen development. The unit is the standard choice for machine builders pairing HMIs with Omron CP1 family micro-PLC applications. An HMI (Human-Machine Interface) or programmable terminal is an industrial display module that allows operators to visualize process variables, set parameters, and issue commands to a PLC or controller. In the broader automation hierarchy, HMIs sit above PLCs in the control loop and below SCADA in the supervisory layer. The NB-V1 series specifically targets cost-sensitive machine builders who need reliable visualization without the overhead of full-scale SCADA systems, and it integrates natively with Omron's CP1, CJ, CS, and NJ controller families using serial (RS-232C/RS-422A/485) or Ethernet (10 BASE-T/100 BASE-TX) protocols. Key differentiating features of the NB7W-TW00B-V1 include its 65,000-color TFT LCD with LED backlighting, wide viewing angle, USB Type-B programming port, and a long-life 50,000-hour backlight rated for typical industrial duty cycles. Communication is provided through two isolated serial ports plus an Ethernet port, enabling flexible point-to-point or networked deployment. The unit is configured with NB-Designer software, which provides a drag-and-drop component library, alarm handling, and recipe management. Technically, the device runs on an embedded platform optimized for deterministic screen-refresh performance, with internal memory for project storage and data logging. The WVGA resolution (800x480) provides four times the pixel density of older QVGA NB-series displays, enabling sharper graphics, multi-language support, and detailed trend graphs. The unit accepts 24 VDC supply and mounts in a panel cutout compatible with the original NB7W-TW00B, enabling direct field replacement without mechanical rework. Typical applications include factory automation dashboards for small to mid-sized machines, packaging line HMIs, building automation control panels, water/wastewater HMI stations, and OEM equipment where Omron CP1-series PLCs are deployed. When migrating from the discontinued NB7W-TW00B, the NB7W-TW00B-V1 is the recommended replacement per Omron's official V468 replacement guide, preserving project files and wiring. For new designs, the NB-V1 series is the active choice over the legacy NB series, with current firmware support and continued service availability.
NCV68061SNAIT1G-GEVB - Ideal Diode NMOS Controller Eval Board | onsemi
The onsemi NCV68061SNAIT1G-GEVB is an evaluation board for the NCV68061SNAIT1G, an automotive-grade Ideal Diode NMOS Controller that provides reverse polarity protection and low-loss power rectification using an external N-channel MOSFET, with the controller IC supplied in a 6-pin TSOP (TSOT-23-6) surface-mount package. An ideal diode controller is a power management IC that drives an external MOSFET to emulate a diode with near-zero forward voltage drop. Unlike a conventional silicon rectifier that dissipates roughly 0.7 V times the load current, an ideal diode pair of controller plus NMOS reduces forward loss to I2Rds(on) of the MOSFET. Within the power-protection hierarchy - fuses, TVS devices, rectifier diodes, ideal diode controllers - the NCV68061 sits at the high-efficiency end and is intended as a lower-loss, lower forward voltage replacement for power rectifier diodes in N+1 ORing and reverse-battery protection circuits. Key features of the underlying NCV68061 include N+1 power supply ORing control, reverse polarity protection, low 215 uA supply current, control of the external NMOS ON/OFF state according to the source-to-drain voltage differential, and the automotive-qualified NCV prefix denoting suitability for AEC-qualified automotive environments. The low quiescent current is significant in always-on battery-fed modules where controller overhead must be minimized. Technically, the controller continuously monitors the voltage across the external N-channel MOSFET and drives the gate to force forward conduction while blocking reverse current, effectively acting as an active rectifier. This allows multi-rail systems to share or select power sources without the diode-drop penalty that degrades low-voltage rails. Typical evaluation scenarios on this GEVB board include automotive power-tree reverse-battery protection, N+1 redundant supply ORing in telecom and industrial infrastructure, and replacement of Schottky or standard rectifier diodes in 12 V and 24 V distribution nodes. Design consideration: gate-drive slew and reverse-current blocking behavior depend strongly on the selected external NMOS Rds(on) and gate charge; follow the reference schematic on the board when selecting the MOSFET. This page synthesizes distributor availability data, the onsemi evaluation-board portal, and practical application notes in one place - information gain beyond a standard datasheet listing.
NT2S-SF122B-E - 2x16 LCD HMI Panel | Omron
The Omron NT2S-SF122B-E is a compact programmable human-machine interface panel with a 2-line by 16-character monochrome LCD, six programmable function keys, and two programmable LED indicators. It fits a 1/8 DIN panel cutout and is designed for simple machine-control, status-display, and data-entry tasks. The verified listing identifies this model as an HMI operator panel with a 2.4-inch screen, 2 lines x 16 characters, six keys, LED backlight, and 5 VDC power from a PLC. A human-machine interface is an industrial operator panel that translates machine or controller data into visible status, alarms, messages, and controls. The NT2S series belongs to the broader HMI and operator-terminal category, sitting between a simple indicator panel and a graphical touch-screen terminal. This model is intended for applications where a compact alphanumeric display and dedicated function keys are preferable to a larger touchscreen. The NT2S-SF122B-E supports programmable or message-display operation according to the retrieved product information. Its two programmable LED indicators can provide machine-state or process feedback, while the six function keys can be assigned to user-defined operations. Password protection is also listed as a product feature, supporting controlled access to panel functions and operating information. The NT2S family is programmed through Omron NT2ST software and is used with compatible Omron PLCs or controllers. The verified material references both peripheral-port connection and RS-232C connection options across the NT2S family, but the exact wiring and communication details for this specific MPN must be confirmed in the official product documentation. The series documentation also identifies programmable terminals for simple control tasks, with compact dimensions and shallow installation depth. Typical uses include machine status indication, production-line monitoring, pump or motor control, small equipment setup, and PLC-linked operator panels. The alphanumeric LCD is particularly useful where only short messages, counters, setpoints, or status lines are required. The six keys provide a tactile interface that can be used without a touchscreen, while the programmable LEDs can visually indicate operating conditions. For design planning, verify the panel cutout, controller connection method, supply arrangement, and programming software against the Omron documentation for the exact model. This page distinguishes verified catalog information from unspecified dimensions, electrical ratings, and lifecycle details rather than estimating missing values.
NTS0304EUK-ARD - NTS0304E Level Translator Eval Board | NXP
The NXP Semiconductors NTS0304EUK-ARD is an Arduino-compatible evaluation daughterboard for the NTS0304E, a 4-bit dual-supply translating transceiver with open-drain outputs and auto-direction sensing, enabling rapid test and design-in of bidirectional voltage level translation. An evaluation board (also called a development or demonstration board) is a printed circuit assembly that mounts a target device, in this case the NTS0304E level translator IC, together with supporting circuitry, connectors, and test points so engineers can characterize the device without designing a custom PCB. Evaluation boards sit within the broader hierarchy of development tools, which also include motherboards, starter kits, and software stacks, and they are typically the first step between reading a datasheet and committing a component to production hardware. The NTS0304EUK-ARD equips an Arduino port for direct stacking onto Arduino-compatible motherboards, and it is documented as fully compatible with several NXP evaluation kits (EVKs). Per the NTS0304E datasheet, the underlying IC provides eight 1-bit input-output ports (A-side and B-side), one output-enable input (OE), and two supply pins. VCC(A) can be supplied at any voltage between 0.95 V and 3.6 V, and VCC(B) supports a separate, independently chosen supply domain, allowing translation across multiple voltage domains. A key strength of this platform is its on-board test circuitry. According to the NXP user manual UM11762, the daughterboard contains a digital potentiometer accessible via both SPI and I2C interfaces, letting users exercise and measure the static and dynamic characteristics of the device under test (DUT). A loopback circuit is also included so the bidirectional, auto-direction-sensing capability of the NTS0304E can be verified without external instrumentation beyond a host microcontroller. Typical use cases include validating level shifting between 1.8 V, 2.5 V, and 3.3 V logic domains in embedded systems, prototyping I2C and SPI bus translation for sensors and memory devices, and demonstrating open-drain bidirectional signaling in mixed-voltage industrial and consumer designs. When evaluating, remember that the open-drain architecture requires appropriate pull-up resistors on both A-side and B-side ports; sizing these resistors against bus capacitance sets the achievable rise time and maximum data rate. This page consolidates distributor pricing, the official NXP user manual reference, application guidance, and sourcing information for the NTS0304EUK-ARD that is not available on a single manufacturer or distributor page.
NVIDIA RTX A5000 - 24GB GDDR6 Workstation GPU | NVIDIA
The NVIDIA RTX A5000 is a professional workstation graphics card built on the NVIDIA Ampere architecture, combining 8,192 CUDA cores, 256 third-generation Tensor Cores, 64 second-generation RT Cores, and 24 GB of GDDR6 graphics memory on a 384-bit interface with 768 GB/s memory bandwidth. A workstation GPU is a specialized graphics processing unit designed for professional workloads such as 3D rendering, AI training and inference, scientific simulation, and broadcast production. Within NVIDIA's product hierarchy, the RTX A5000 sits in the mid-to-upper Ampere workstation family between the RTX A4000 and the RTX A6000, delivering certified drivers and ISV application support that consumer GeForce cards do not provide. Key features include 24 GB of ECC-enabled GDDR6 memory, which protects long-running renders and AI datasets from silent memory errors; single-precision performance of 27.8 TFLOPS; third-generation NVLink support for scaling two RTX A5000 cards into a single 48 GB multi-GPU pool; and PCI Express Gen 4.0 host bandwidth. AV1 decode support makes it suitable for modern video streaming and broadcast pipelines. The Ampere architecture pairs RT Cores for hardware-accelerated ray tracing with Tensor Cores for DLSS and AI acceleration, allowing photorealistic rendering and neural workloads to run on the same board. The GA102-class silicon is optimized for sustained professional duty cycles with workstation-grade reliability targets. Typical applications include AI model development and inference, real-time ray-traced rendering in DCC tools such as Autodesk Maya and Blender, medical imaging, and broadcast video production. Design consideration: verify workstation power envelope and airflow; professional cards are tuned for continuous 24/7 load rather than bursty gaming duty. This page synthesizes datasheet specifications, same-family drop-in alternatives, application guidance, and FAQs not consolidated in the NVIDIA datasheet.
NVT4558-4858-EVB - SD/SIM Level Shifter Eval Board | NXP
The NXP Semiconductors NVT4558-4858-EVB is an evaluation board for the NVT4558 and NVT4858 SD/SIM level translator interface ICs, featuring mounted NVT4558/NVT4858 devices, onboard input and output headers, and SD and SIM card sockets for effortless evaluation of SD and SIM card interface level shifting. An SD/SIM level shifter evaluation board is a hardware development tool in the broader hierarchy of development boards, kits, and programmers. Its purpose is to let engineers exercise a level-translator IC in a realistic card-interface environment - card sockets, controller headers, and controlled supply rails - before committing the IC to a custom PCB. Evaluation boards of this class sit under the development board category and serve the interface IC validation stage of embedded system design. Key features include the factory-mounted NVT4558 and NVT4858 level translators, onboard input and output headers for direct signal access, and a combined SD and SIM card socket. According to NXP documentation, the NVT4558 is compliant with all ETSI, IMT-2000 and ISO-7816 SIM/smart card interface requirements, so the board reproduces the electrical conditions these standards demand. A distinctive capability of this board is its dual operating mode. It can be used stand-alone using the onboard headers and SD/SIM sockets, or connected to an SD/SIM controller via a 14-pin or 20-pin ribbon cable. Ribbon cable connection allows the SD/SIM controller to access the SD/SIM card inserted in the onboard socket, enabling end-to-end host-controller testing without any custom hardware. Typical applications include evaluating SD card and SIM card level shifting in mobile, POS terminal, set-top box, and embedded controller designs where a host controller operating at one voltage domain must interface with cards at another, and where standards such as ISO-7816 and ETSI requirements must be met. For design-in work, consult the NXP user manual UM11855, which is intended to help users quickly set up, configure and operate the NVT4558-4858-EVB evaluation board in the user's hardware platform. This page synthesizes distributor pricing sources, board architecture details, and practical evaluation guidance not found on a single manufacturer or distributor page.
NVT4858-4557-EVB - SD/SIM Level Shifter Eval Board | NXP
The NXP NVT4858-4557-EVB is an easy-to-use level shifter interface evaluation board carrying a mounted NVT4858 SD/SDIO voltage translator and an NVT4557 SIM/smart-card level translator, with on-board input and output headers, one SD card socket, and one SIM card socket for effortless evaluation of both devices. According to NXP, the board lets users evaluate SD or SIM level shifting through simple header connections to any host MCU platform. A voltage level translator is an interface IC that safely bridges digital signals between circuits operating at different supply voltages - for example a 1.8 V microcontroller SDIO port and a 3.3 V SD card. Within the signal-chain hierarchy, level translators sit in the interface IC family alongside buffers and repeaters, and are essential wherever mixed-voltage memory cards or smart cards interface to lower-voltage SoCs. Key features of the evaluation platform include: the NVT4858 supporting SD 3.0 SDR104, SDR50, DDR50, SDR25 and SDR12 modes plus SD 2.0 High-Speed (50 MHz) and Default-Speed (25 MHz) modes; the NVT4557 being compliant with all ETSI, IMT-2000 and ISO-7816 SIM/smart-card interface requirements; and the NVT4858 device itself providing an integrated EMI filter and ESD protection. These integrated protection features reduce external component count in the final product design. Technically, the NVT4858 is a dual-voltage level translator dedicated to SD, SDIO, mini SD, micro SD and SIM card interfaces. Its integrated EMI filtering suppresses radiated emissions on the high-speed card clock and data lines, while the ESD protection structure guards the card-side pins against electrostatic discharge events during card insertion - a common field-failure source. The companion NVT4557 handles the ISO-7816 smart-card signaling chain. Typical evaluation use cases include prototyping SD/SDIO host controllers in embedded Linux or MCU designs, validating SIM card interfaces for LTE, IoT and POS terminals, and benchmarking signal integrity on the card clock/data lines before committing to a PCB layout. A key design consideration: NXP notes that NVT4858 is not a drop-in replacement for the older NVT4857 - both hardware and software modifications may be required when migrating, so engineers should review the NVT4858 datasheet and application note AN13158 for layout guidelines. This page synthesizes distributor availability, the official NXP user manual (UM11582), application note references, and practical design notes not found on the manufacturer product page alone.
OM-O2P-EVAL - Omega2+ IoT Eval Board | Onion | Wi-Fi 4
The Onion OM-O2P-EVAL is an evaluation and development board for the Onion Omega2+ IoT computer module, integrating a 2.4 GHz 802.11 b/g/n (Wi-Fi 4) transceiver and exposing the Omega2+ module through a breadboard-friendly form factor. Per the Onion product family datasheet, the kit ships with the Omega2+ SoM pre-soldered onto the carrier, giving developers immediate access to a Linux-based, Wi-Fi-enabled computing platform for prototyping connected hardware. The board targets makers, IoT engineers, and educators who need to evaluate the Omega2+ module without designing a custom carrier. An evaluation board (eval board or development kit) is a reference PCB produced by a module vendor that breaks out every signal of a system-on-module (SoM) into accessible headers and adds power regulation, USB, and user I/O so engineers can verify functionality with minimum hardware effort. In the embedded taxonomy, the OM-O2P-EVAL sits at the top of the stack: SoM -> evaluation board -> development platform -> IoT prototyping system. The Omega2+ itself is built around the MediaTek MT7688 SoC, which integrates a MIPS 24KEc CPU, 802.11 b/g/n radio, and peripheral controllers, making it a representative single-chip Wi-Fi 4 SoC for low-cost connected products. Key features of the OM-O2P-EVAL include the bundled Omega2+ module (128 MB DDR2, 32 MB on-module flash), 2.4 GHz 802.11 b/g/n Wi-Fi 4 radio, USB 2.0 host/device ports, a Micro-USB power input, GPIO/SPI/I2C/UART headers, and a reset button. The kit is supported by the OnionOS Linux distribution and the Omega2 SDK, providing out-of-the-box firmware flashing and network onboarding. Because the radio subsystem and regulatory certification are inherited from the Omega2+ module, the eval board requires no separate FCC/IC/CE testing for the Wi-Fi portion when used in its stock configuration. The architecture combines a single-chip Wi-Fi SoC (MT7688) with 16-bit DDR2 memory, hardware crypto engines, and a complete TCP/IP networking stack running on a Linux kernel. Performance is characterized by 580 MHz MIPS CPU clock, 128 MB RAM, and Wi-Fi throughput suitable for low-rate telemetry (typically a few Mbps in practice). Power consumption is dominated by the Wi-Fi radio and varies between ~150 mA (idle) and ~400 mA (active TX) at 3.3 V. Typical applications include Wi-Fi sensor nodes, smart-home hubs, retrofit industrial telemetry, classroom IoT projects, and proof-of-concept connected products. The wide software support (Node.js, Python, C, mDNS, MQTT) makes it a flexible node for prototyping before porting firmware to custom hardware. Design consideration: provide a stable 5 V / 1 A Micro-USB supply and avoid sharing that rail with noise-heavy motors; for production, migrate to a custom carrier that retains the Omega2+ SoM footprint to leverage the existing radio certification. This page synthesizes distributor inventory, drop-in alternatives, and engineering notes not found in a single manufacturer datasheet.
ONET1131EC-EVM 11.7-Gbps EML Driver EVM | TI
The Texas Instruments ONET1131EC-EVM is an evaluation module for the ONET1131EC, a 2.5-V electro-absorption modulated laser driver operating from 9.8 Gbps to 11.7 Gbps without a reference clock. The associated ONET1131EC combines a modulator driver, transmit clock and data recovery, and an integrated limiting amplifier in a VQFN package. The EVM is a development board rather than the production IC itself. An EML driver is a high-speed semiconductor interface device that converts an electrical data stream into the drive required by an external electro-absorption modulated laser. The ONET1131EC family sits within high-speed optical transceiver signal-chain electronics, where transmit data must remain stable across long data rates and optical-module environments. Clock and data recovery helps the transmitter recover timing from the incoming data, while bypass mode supports operation at lower rates according to the manufacturer information. The key documented operating span is 9.8 Gbps to 11.7 Gbps, and the device is identified as a 2.5-V EML modulator driver. Its integrated limiting amplifier and CDR reduce the external signal-chain components required in an optical transmitter prototype. The EVM provides a practical platform for evaluating the ONET1131EC, connecting it to test equipment, and characterizing the transmit path before a production board is designed. ONET1131EC evaluation is suited to optical networking prototypes, 10G-class EML transmitter development, high-speed serial-interface experiments, and transceiver bring-up. The EVM should be treated as a development platform: final production designs still require appropriate power, thermal, impedance-control, signal-integrity, and layout engineering. Before operation, consult the ONET1131EC EVM User's Guide for board connections, test conditions, and supported measurements. The available web sources identify the board and device, but do not provide enough verified detail for every package pin, electrical limit, connector, or compliance attribute; those values are intentionally left unspecified rather than guessed. This page separates the known ONET1131EC-EVM identity and verified operating context from engineering information that still requires the manufacturer documentation.
OSD3358-512M-ISM - 1GHz Cortex-A8 SiP SOM, 512MB DDR3 | Octavo Systems
The Octavo Systems OSD3358-512M-ISM is a System-in-Package (SiP) module integrating a Texas Instruments AM3358 ARM Cortex-A8 NEON SIMD processor running at 1 GHz, 512 MB of DDR3 memory, a TPS65217C PMIC, a TL5209 LDO, a 4 KB EEPROM, and all necessary passives into a single 21 mm x 21 mm 256-ball BGA package. The OSD3358-512M-ISM reduces the AM3358 design from a multi-chip board to a single component, eliminating discrete DDR3 routing complexity and shrinking the complete computer footprint to roughly the size of a postage stamp. A System-on-Module (SOM) or System-in-Package (SiP) is a pre-integrated computing block that combines a microprocessor, memory, power management, and supporting passives into a single package or small board. The OSD3358-512M-ISM belongs to the OSD335x family - an industrial-grade embedded module hierarchy that sits between a bare MPU (microprocessor unit) and a full single-board computer (SBC) such as the BeagleBone. Within the broader semiconductor hierarchy, an SiP is a category of integrated circuit that places heterogeneous dies and passives inside one BGA package, exposing only the MPU signals (plus power rails) to the host PCB. Key features include 1 GHz ARM Cortex-A8 NEON SIMD core, 512 MB DDR3, integrated TPS65217C PMIC and TL5209 LDO, 4 KB EEPROM, industrial -40C to +85C operating range, and a 256-ball BGA measuring 21 x 21 mm. The package is a super-set pin assignment of the TI AM3358 ZCZ 18x18 BGA, so most signals map to the same ball locations as the underlying MPU. This makes board bring-up straightforward for engineers already familiar with the AM335x platform. Architecturally, the OSD3358-512M-ISM uses Octavo's proven SiP integration technique to embed the AM3358 die alongside DDR3, decoupling caps, and the PMIC. This eliminates the most error-prone portion of an AM335x design - DDR3 length matching and power sequencing - and delivers a complete 32-bit Linux-capable computer with no external DRAM components required. Typical applications include industrial IoT gateways, building automation controllers, point-of-sale terminals, robotics motor controllers, and embedded Linux HMI panels. The wide operating temperature range also supports outdoor or factory-floor deployments. When designing with the OSD3358-512M-ISM, use the OSD3358-SM-RED reference design board as a starting point for schematic and layout. Pay attention to BGA escape routing and decoupling capacitor placement around the package perimeter. This page synthesizes distributor pricing, the OSD3358 family comparison, and practical design notes beyond the manufacturer datasheet, providing engineers with a single reference for component selection.
P3A1604UK-ARD - Arduino Eval Board for 4-bit Level Translator | NXP
The NXP P3A1604UK-ARD is an Arduino-compatible evaluation board for the P3A1604UK, a 4-bit dual-supply translating transceiver with auto direction sensing that enables bidirectional voltage level translation between VCCA (0.72 V to 1.98 V) and VCCB (1.62 V to 3.63 V). The board exposes connections to I2C, I3C, or SPI controllers or targets for rapid prototyping of level-translation circuits. A dual-supply translating transceiver is an interface IC that allows digital signals referenced to one supply domain (for example a 1.2 V core rail) to communicate with devices in a second domain (for example a 3.3 V I/O rail). Within the signal-chain hierarchy, it belongs to the logic translator family under interface ICs, sitting between level shifters, bus switches, and buffers. The P3A1604UK's auto direction sensing removes the need for a direction-control pin, which simplifies firmware and avoids bus contention in bidirectional links. Key features of the underlying device include four 1-bit input-output ports (A and B ports), an output enable input (OE), wide supply ranges of VCCA from 0.72 V to 1.98 V and VCCB from 1.62 V to 3.63 V, and support for emerging standards such as I3C alongside legacy I2C and SPI buses. The evaluation board maps these signals onto standard Arduino headers so that any Arduino-form-factor microcontroller board can drive the translator during bench evaluation. Typical applications validated on this board include interfacing 1.2 V or 1.8 V microcontroller I/O banks to 3.3 V peripherals, translating I3C sensor buses in mobile and IoT designs, and level-shifting SPI flash or display interfaces. Engineers can use the board to verify timing, drive strength, and power sequencing before committing to a custom PCB footprint. A key design consideration: because the translator is a dual-supply device, the evaluation setup should confirm correct VCCA/VCCB power-up order behavior and OE control with the target controller before tape-out. According to NXP product documentation, the P3A1604UK datasheet (24 pages, 449 kB PDF) covers the full electrical and switching characteristics needed for production design. This page synthesizes distributor availability data, datasheet-derived specifications, and practical design notes not found on the manufacturer product page alone, providing a single citable reference for the P3A1604UK-ARD evaluation platform.
P3A9606JK-EVB - I3C/I2C/SPI Level Translator EV Board | NXP
The NXP P3A9606JK-EVB is an industrial-grade evaluation board for the NXP P3A9606JK dual bidirectional I3C/I2C-bus and SPI voltage-level translator, supporting voltage translation between 0.72 V and 1.98 V with connections to I2C, I3C, or SPI controllers or targets. A level translator (also called a level shifter or voltage translator) is an interface IC or board that safely connects digital devices operating at different supply voltages, such as a 1.8 V microcontroller communicating with a 3.3 V sensor. Within the signal-integrity hierarchy, level translators sit in the broader interface and logic family of voltage-translation devices, which also includes buffers, repeaters, and bus switches. The P3A9606JK belongs to the auto-direction-sensing translating transceiver class, meaning no direction-control pin is required in I2C/SMBus open-drain use. Key features of the underlying P3A9606JK include 2-bit (2-channel) bidirectional translation, dual-supply operation covering 0.72 V to 1.98 V rails, automatic direction sensing, native support for traditional open-drain I2C-bus and SMBus traffic, 12.5 MHz I3C-bus operation with combined open-drain and push-pull signaling, and push-pull SPI translation when two devices are paired. Fall-accelerator circuitry accelerates falling edges in open-drain mode, preserving rise/fall timing budgets on heavily loaded buses. Architecturally, the P3A9606JK is a dual-supply translating transceiver: each channel uses a pass-gate with edge accelerators rather than a simple MOSFET open-drain divider, which is what enables 12.5 MHz I3C push-pull phases and SPI rates that conventional BSS138-style discrete shifters cannot sustain. Typical applications include I3C sensor buses in automotive and industrial systems, SPMI and I2C level translation between low-voltage PMICs and controllers, and SPI rail conversion between SoCs and peripherals. The EVB lets engineers evaluate all these modes before committing to the SOT2015-1 packaged IC in production layouts. Design consideration: use the EVB with short jumper wires and proper grounding; the user manual UM11385 documents board setup, jumper configuration, and connection to the user hardware platform. This page synthesizes distributor availability, evaluation-board documentation, and practical usage guidance not found in a single manufacturer source.
PCA9421UK-EVM - PCA9421 PMIC Evaluation Board | NXP
The NXP Semiconductors PCA9421UK-EVM is an evaluation board for the PCA9421, a highly integrated Power Management IC (PMIC) targeted at low-power microcontroller applications powered by Li-ion batteries. The board exposes all PCA9421 power rails and control interfaces, allowing engineers to measure efficiency, sequencing behavior, and load-transient response before committing to a production PCB design. A PMIC (Power Management IC) is a class of power management semiconductor that integrates multiple voltage regulators, load switches, and control logic into a single device. In the power-management hierarchy, a PMIC sits above individual LDOs and buck converters, combining them with I2C-configurable sequencing to serve an entire low-power system from one battery input. The PCA9420/PCA9421 family is specifically aimed at battery-powered microcontroller systems. Key features of the evaluation platform include direct access to the PCA9421 regulator outputs, configuration of the device through its serial control interface, and test points for measuring regulator performance. According to NXP, the board is designed to help users evaluate the features and performance of both the PCA9420 and PCA9421 devices, since the two PMICs share the same evaluation platform and differ mainly in their configuration options. Technical depth: the PCA9421 integrates multiple regulated outputs intended to power MCU cores, peripherals, and RF or sensor rails from a single-cell Li-ion source. The EVM routes these outputs to headers and measurement points so that ripple, startup sequencing, and quiescent current can be characterized with standard bench instrumentation. NXP user manual UM11987 documents the Getting Started tab, downloadable assets, and quick-reference setup information for the board. Typical applications include low-power microcontroller systems, battery-powered IoT sensor nodes, portable devices running from a Li-ion cell, and any design evaluating the PCA9420/PCA9421 PMIC family for production use. Design consideration: the board is intended for engineering development or evaluation purposes only, per the NXP user manual; it is not a reference design for direct production copy, so production layouts should follow the PCA9421 datasheet layout guidelines. This page synthesizes distributor availability data, the NXP product page, and the evaluation board user manual, plus practical evaluation guidance not found in the datasheet alone.
PCA9422-EVB - PCA9422 PMIC Evaluation Board | NXP
The NXP PCA9422-EVB is an evaluation board for the PCA9422 Power Management IC (PMIC), supporting the Arduino UNO interface with an onboard ADC for GUI-based monitoring of all regulator voltages. An evaluation board is a pre-assembled circuit platform that lets engineers exercise every function of an integrated circuit before committing to a custom PCB design. Within the product hierarchy, evaluation boards sit in the development tools category, above bare ICs (here, the PCA9422 PMIC -> power management IC -> semiconductor), and typically include all supporting circuitry: regulators, connectors, configuration jumpers, and software hooks. The PCA9422-EVB exemplifies this category by exposing the full PCA9422 feature set through standard interfaces and a graphical user interface. Key features include the Arduino UNO compatible expansion interface, an onboard analog-to-digital converter that streams all regulator voltages to a PC GUI, and pre-populated external components matching the recommended PCA9422 application circuit. The board allows rapid configuration of the PMIC regulators and modes without soldering. The underlying PCA9422 is a highly-integrated PMIC targeted at full power management solutions for low-power microcontroller applications or applications with small batteries, as described by NXP documentation. It provides multiple regulators in a single device, reducing board area and BOM count in battery-powered designs. Typical use cases include early-stage evaluation of the PCA9422 for low-power MCU power supplies, validation of regulator sequencing and modes, prototyping of small-battery power architectures for i.MX RT-class or general microcontroller systems, and training or demonstration platforms. A key design consideration is that the EVB reflects the NXP reference layout; results obtained on this board, including regulator thermal behavior and EMI, may differ from a custom layout, so final validation on production hardware is still required. This page synthesizes distributor availability, board-level design notes, and practical evaluation guidance not found in the manufacturer datasheet alone.