Circuitos Integrados

PIC18F44K22T-I/MV

PIC18F44K22T-I/MV - 16KB Flash XLP 8-bit MCU 40-UQFN | Microchip

The Microchip Technology PIC18F44K22T-I/MV is a 8-bit PIC18 microcontroller built on Microchip's nanoWatt XLP technology platform, delivering 64 MHz CPU performance with 16 KB of Flash program memory and 768 B of RAM in a 40-pin UQFN (5x5 mm) package (designator MV). It is part of Microchip's low-power, high-performance PIC18 family and integrates peripherals including an enhanced universal synchronous/asynchronous receiver-transmitter (EUSART), multiple capture/compare/PWM (ECCP) modules, a 10-bit ADC, and the nanoWatt XLP power-management engine for ultra-low standby current. The 'T' suffix indicates tape-and-reel packaging, while 'I' denotes the industrial -40C to +85C operating temperature range. The 'MV' suffix specifies the 40-pin UQFN surface-mount package. A PIC18 microcontroller belongs to the 8-bit microcontroller category, sitting at the base of the embedded control hierarchy alongside 16-bit, 32-bit, and ARM Cortex-based MCUs. Within Microchip's portfolio, PIC18 sits between PIC16 (baseline) and dsPIC33 (digital signal controller) families. PIC18 parts use a modified Harvard RISC architecture with 16-bit instructions, an 8-bit data path, hardware multiplier, and C-friendly instruction set, and they serve as general-purpose microcontrollers in commercial, industrial, and consumer products. PIC18F K-series parts add nanoWatt XLP low-power features and high-performance analog for battery-powered and energy-efficient designs. Key features include 64 MHz (16 MIPS) operation from a 2.3V to 5.5V supply (typical operation extends to 5.5V), 36 programmable I/O pins, an internal 16 MHz oscillator with PLL, a 10-bit ADC with multiple input channels, two EUSART peripherals, two MSSP (SPI/I2C) peripherals, and Enhanced Capture/Compare/PWM modules. The device supports nanoWatt XLP idle/doze/sleep modes for battery-aware applications. The 40-UQFN (5x5 mm) package conserves board area while exposing the full peripheral set, including two analog comparators and a charge time measurement unit (CTMU) for capacitive touch. Technical depth: the device contains 64 KB of addressable program space (the program image in Flash is 16 KB), 3936 B of data SRAM, 256 B of EEPROM, a 32-level hardware stack, and an in-circuit debugger interface. The on-chip debug and ICSP programming pads give design engineers a low-cost development path using Microchip's PICkit or MPLAB SNAP tools. The microcontroller is supported by MPLAB X IDE and the free XC8 C compiler, and it integrates with Microchip's code-configurator ecosystem. Typical applications include industrial sensor signal conditioning with the ADC + CTMU, low-power battery IoT sensor nodes leveraging nanoWalt XLP sleep modes, USB HID peripherals using the MSSP/EUSART plus external transceiver, home appliance control, motor-control loops via the ECCP module, and human-interface boards with capacitive touch buttons. The wide -40C to +85C industrial temperature range makes the PIC18F44K22T-I/MV a workhorse for harsh-environment and factory-automation designs. When designing with this device, ensure the chosen 5x5 mm UQFN footprint and adjacent decoupling lands are on a clean ground pour. Place a 100 nF decoupling capacitor as close as possible to the VDD pins, and route the ICSP clock/data lines away from switching traces to maintain debug reliability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato

PIC18F44K22T-I/PT

PIC18F44K22T-I/PT - 8-bit 64MHz XLP MCU 16KB Flash | Microchip

The Microchip Technology PIC18F44K22T-I/PT is an 8-bit PIC18F microcontroller from the nanoWatt XLP family, delivering up to 64 MHz CPU performance from a 16 KB (8K x 16) Flash program memory and 768 bytes of RAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package. Background Knowledge: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically Flash), volatile data memory (RAM), and a rich set of peripherals such as timers, ADC, communication ports, and GPIO. The PIC18F family is Microchip's 8-bit architecture with an enhanced instruction set, hardware multiplier, and C-compiler-friendly design, sitting in the broader hierarchy of MCU -> embedded controller -> semiconductor. The "K" series and "nanoWatt XLP" branding indicate ultra-low-power variants designed for battery-powered and energy-harvesting applications. Key features include 16 KB self-programmable Flash, 768 bytes RAM, 256 bytes EEPROM, up to 64 MHz operation, and an industrial-grade temperature range of -40C to +85C (I-suffix). Peripherals include multiple Enhanced USART, MSSP (SPI/I2C), 10-bit ADC with up to 30 channels (on 44-pin variants), 8-bit/16-bit timers, and PWMs. The "44K22" silicon supports nanoWatt XLP technology with sleep currents in the nanoamp range, making it well suited to portable and always-on designs. The PIC18F44K22T-I/PT variant is supplied in TQFP-44 (PT) industrial temperature grade and Tape-and-Reel packaging, denoted by the "T" suffix. It is part of the 28/40/44-pin PIC18F2X/4XK22 family that shares a common core, instruction set and peripheral IP, differing mainly in pin count, Flash/RAM size and analog channel count. This sharing enables seamless migration across PIC18F4XK22 and PIC18F2XK22 SKUs within the same PCB footprint family. Typical applications include low-power IoT sensor nodes, battery-powered handheld instruments, home automation and appliance controls, automotive body and accessory electronics (non-safety), and industrial sensor interface boards. The combination of low sleep current, generous Flash, and rich analog/digital peripherals makes it a flexible general-purpose MCU. When designing with the PIC18F44K22T-I/PT, ensure that the ICSP programming pins (PGC/PGD) are routed to a header for in-circuit programming, and that the supply decoupling (typically 100 nF on VDD plus bulk capacitance) is placed close to the pins. Verify the silicon revision and errata against the current datasheet, since K22-family revisions have had ADC and WDT errata updates. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC18F family, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

PIC18F4510-I/P

PIC18F4510-I/P - 8-bit 40MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC18F4510-I/P is an 8-bit PIC microcontroller based on the enhanced PIC18 Harvard architecture, featuring 32 KB of Flash program memory, 1536 bytes of SRAM, and 256 bytes of EEPROM, housed in a 40-pin PDIP (DIP-40) through-hole package. It runs at up to 40 MHz clock speed with an instruction cycle time of 100 ns (4 clocks per instruction) and operates from 4.2 V to 5.5 V supply, providing 36 digital I/O pins, a 10-bit Analog-to-Digital Converter with up to 13 input channels, two Enhanced USART modules, MSSP (SPI/I2C), and two CCP modules. The "I" suffix indicates the industrial operating temperature range of -40C to +85C, while the "/P" suffix denotes the PDIP-40 package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, peripherals, and interrupt logic on one die. The PIC18F family specifically targets high-performance 8-bit applications using a RISC-style instruction set with 16-bit opcodes, an 8-bit data path, and 31-level hardware stack, positioning it between simple PIC10/12/16 parts and the 16-bit dsPIC/PIC24 family. This hierarchy places the PIC18F4510 within the broader class of microcontrollers, then to embedded controllers, and finally to the larger embedded processing semiconductor category used for system-level design. Key differentiating features of the PIC18F4510 include nanoWatt technology for dynamic power management with multiple idle and sleep modes, a 10-bit A/D converter with up to 13 channels and auto-acquisition, two Enhanced USART ports supporting RS-232/RS-485, a Master Synchronous Serial Port (MSSP) configurable for SPI or I2C, and 4 timer modules (Timer0 through Timer3). The device also includes a 10-bit Pulse-Width Modulation (PWM) module, parallel slave port, and 13 channels of 10-bit ADC. The PIC18F4510 is engineered around the enhanced PIC18 core with hardware multiply support and C-compiler friendly architecture. It uses Flash program memory with self-programming capability, allowing in-field firmware updates via ICSP (In-Circuit Serial Programming). The device integrates an internal RC oscillator, a 10-bit ADC, and nanoWatt power management features in a single 40-pin PDIP package, balancing performance with cost-effectiveness for embedded designs. Typical applications include industrial control systems, automotive body electronics, consumer appliance controllers, HVAC systems, sensor interface modules, and educational/hobbyist projects. The 32 KB Flash and 1536-byte SRAM support C-based firmware using the MPLAB XC8 compiler, while the 36 I/O lines and 13 ADC channels enable interfacing with multiple sensors, switches, and communication peripherals. When designing with this device, consider the power consumption in sleep modes - the nanoWatt feature provides multiple low-power states. Decoupling capacitors (0.1 uF) should be placed close to VDD/AVDD pins, and the ICSP programming interface requires dedicated RB6/RB7 pin access. The 40-pin PDIP package enables easy prototyping on breadboards and through-hole PCBs. This page synthesizes distributor pricing, drop-in compatible alternatives within the PIC18F44 family, and practical design notes not commonly found in the manufacturer datasheet, providing engineers with a curated selection guide for new designs and legacy maintenance.

Cotação Contato

PIC18F4515-E/ML

PIC18F4515-E/ML - 8-bit 48KB Flash MCU, 44-VQFN | Microchip

The Microchip Technology PIC18F4515-E/ML is an 8-bit Flash microcontroller from the PIC18F family, offering up to 48KB of program memory (24K x 16) and 25 MIPS performance at 5V, housed in a 44-pin VQFN exposed-pad package. The device features a C-compiler-optimized RISC architecture, an 8x8 single-cycle hardware multiplier, and an internal oscillator block supporting 31 kHz to 8 MHz with 4x PLL, providing flexible clocking across a 2V to 5.5V operating range. An 8-bit microcontroller is a single-chip computer that integrates a CPU, program memory (Flash), data RAM, EEPROM, and a rich set of peripherals (ADC, timers, communication ports) on one die. PIC18F devices specifically target mid-range embedded applications with C-friendly architecture (linear program memory, hardware multiply, hardware stack), placing them in the hierarchy MCU -> microcontroller -> embedded controller -> semiconductor. The nanoWatt Technology dynamic power-management modes in this family minimize active and sleep currents, extending battery life in low-duty-cycle applications. Key differentiating features include a 10-bit ADC with up to 13 channels, enhanced CCP modules, a programmable 16-bit timer, an enhanced USART supporting RS-485/RS-232, an MSSP port for SPI and I2C (master/slave), dual analog comparators, a 32 kHz secondary oscillator for real-time-clock use, fail-safe clock monitor, and a separate RC-oscillator watchdog timer. The enhanced instruction set adds 8x8 hardware multiply in a single cycle, table read/write to Flash, and a 31-level hardware stack. The Extended (-E) temperature grade supports -40C to +125C operation. The 44-pin VQFN with exposed pad offers a compact footprint while exposing a thermal pad that, when soldered to the PCB ground plane, dramatically lowers theta_JA and improves continuous full-speed operation. The MPLAB ICD and PICkit debuggers program Flash and provide in-circuit breakpoints through the standard ICSP interface, enabling firmware iteration without removing the chip. Typical applications include industrial automation (sensor conditioning with on-chip ADC, Modbus RS-485 node), automotive body and HVAC controls (AEC-Q100 equivalent Extended temp grade), medical low-power instrumentation (sleep-mode sensor reading), consumer appliances (user interface + motor/relay control), and USB-free embedded networking using enhanced USART. The combination of large Flash, 10-bit ADC, and nanoWatt modes also suits data loggers and remote sensor transmitters. A design consideration: the extended -E temperature variant is intended for harsh environments but operates at slightly different DC characteristics than the -I industrial grade; verify oscillator stability and ADC linearity across the full -40C to +125C range during validation, and place a 0.1 uF ceramic decoupling capacitor within 5 mm of each VDD/VSS pair. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

PIC18F4515-E/P

PIC18F4515-E/P - 8-bit 48KB Flash MCU, 40-Pin PDIP | Microchip

The Microchip PIC18F4515-E/P is an 8-bit RISC Flash microcontroller from the PIC18F family, delivering up to 10 MIPS performance at 3V, housed in a 40-pin PDIP through-hole package. The device integrates 48KB of Flash program memory, 3968 bytes of SRAM, and 256 bytes of EEPROM, with 36 digital I/O lines and a 10-bit A/D converter. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable I/O peripherals. The PIC18F family sits within Microchip's 8-bit PIC architecture hierarchy: PIC18F -> PIC18 -> PIC -> 8-bit MCU -> microcontroller -> embedded system. The PIC18F4515-E/P belongs to the nanoWatt power-managed family, providing flexible oscillator options including an internal 31 kHz to 8 MHz source with 4x PLL. Key features include a hardware 8x8 single-cycle multiplier, a Fail-Safe Clock Monitor (FSCM) for safe shutdown when the primary clock fails, and a separate Watchdog Timer with its own RC oscillator. The integrated 10-bit ADC supports multiple analog input channels, while dual analog comparators and a 10-bit Pulse-Width Modulation (PWM) module enable motor control and power-conversion designs. The 40-pin PDIP form factor is favored for hobbyist, breadboard, and legacy through-hole assemblies. The PIC18F4515-E/P's C-optimized RISC architecture allows efficient code generation with the MPLAB XC8 compiler. The -E suffix denotes the extended industrial temperature range (-40C to +125C). Internal peripherals such as the Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), Master Synchronous Serial Port (MSSP) supporting SPI and I2C, and a parallel slave port make this device suitable for communication-rich embedded applications. Typical applications include industrial control panels, sensor monitoring nodes, low-power motor drivers, and legacy 5V embedded systems. The wide operating voltage range of 2.0V to 5.5V supports battery-powered and USB-powered designs, while the nanoWatt technology enables sleep currents in the microamp range for energy-harvesting endpoints. When designing with this MCU, observe the 40-pin PDIP pinout shared with the PIC18F4X1X series and verify the 5V-tolerant I/O count against your application. Decouple VDD with at least 100 nF ceramic plus 10 uF bulk capacitors placed within 5 mm of the supply pins. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

PIC18F4515-E/PT

PIC18F4515-E/PT - 8-Bit 48KB Flash MCU, 44-TQFP | Microchip

The Microchip Technology PIC18F4515-E/PT is an 8-bit RISC Flash microcontroller from the PIC18F family, featuring 48 KB of program Flash, 3968 bytes of RAM, 256 bytes of EEPROM, and 36 I/O pins in a 44-pin TQFP surface-mount package. It executes instructions at up to 10 MIPS from a 40 MHz internal clock (10 MHz input oscillator, 4x PLL option to 40 MHz) and integrates a 10-bit ADC with up to 13 channels, multiple Enhanced USART/CCP/ECCP peripherals, an Enhanced CAN 2.0B module, and the nanoWatt power-managed sleep modes that made the PIC18F45xx series a workhorse for industrial and automotive embedded designs. The 'E' suffix designates the Extended (-40C to +125C) operating temperature range, while the '/PT' suffix specifies the 44-pin TQFP (Thin Quad Flat Pack) package supplied in Tray. A PIC (Peripheral Interface Controller) microcontroller is a Harvard-architecture, RISC-based single-chip computer that integrates CPU, Flash program memory, RAM, EEPROM, timers, communication peripherals, and I/O on one die. Within the broader semiconductor taxonomy, PIC MCUs belong to Microcontrollers > 8-bit MCUs > Flash MCUs > Embedded Controllers, and they are designed for deterministic real-time control with low power consumption. The PIC18 family is the upper end of Microchip's 8-bit line, adding 16-bit-wide instructions, hardware multiply, and linear program memory up to 2 MB. Key features of the PIC18F4515 include 48 KB Flash (24K x 16), 3.8 KB RAM, 256 B EEPROM, a 10-bit A/D converter with 13 input channels (shared with analog-capable I/O), a CAN 2.0B controller with DMA-style message buffering, an Enhanced USART, MSSP (SPI/I2C), two CCP and one ECCP module, two 8-bit and three 16-bit timers, a 16-bit timer with Gate Control for motor control, and the nanoWatt power-managed run/IDLE/sleep modes. The 44-TQFP package gives a compact 10x10 mm footprint with 0.80 mm pitch and supports standard SMT assembly. Typical applications for the PIC18F4515 include CAN node endpoints in automotive body and chassis ECUs, industrial sensor hubs, motor control boards, building automation nodes, and any embedded system that needs CAN bus connectivity plus moderate Flash. The 10-bit ADC and 13 analog inputs suit it well for multi-signal acquisition. The device supports In-Circuit Serial Programming (ICSP) via MPLAB X IDE, MPLAB XC8 C compiler, and PICkit 5 debug probe. When designing with the PIC18F4515, reserve 5V supply margin and follow Microchip's recommended decoupling (0.1 uF + bulk) on VDD/VSS pairs, plus a 10 uF bulk on AVDD/AVSS for ADC accuracy. For CAN, terminate the bus with 120 ohm at each end and respect the bus-length vs baud-rate tradeoff. Migration paths include the PIC18F45K22 (more RAM, nanoWatt XLP) and the PIC18F46K22, both in pin-compatible TQFP-44. This page synthesizes distributor pricing, drop-in alternatives, application notes, and practical design guidance not consolidated on the manufacturer datasheet.

Cotação Contato

PIC18F4515-I/ML

PIC18F4515-I/ML - 48KB Flash 8-bit MCU, 44-QFN | Microchip

The Microchip Technology PIC18F4515-I/ML is an 8-bit RISC microcontroller in the PIC18 family, delivering up to 10 MIPS performance from a C compiler-optimized architecture housed in a 44-pin QFN package with industrial -40C to +85C temperature rating. Key headline specifications include 48 KB of Flash program memory, 3968 bytes of SRAM data memory, a maximum clock speed of 40 MHz, and 36 general-purpose I/O pins. The part integrates Enhanced USART (EUSART), MSSP (I2C/SPI), and Parallel Slave Port (PSP) connectivity alongside four timers and multiple PWM channels. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package, allowing it to sense, compute, and actuate in embedded systems. Within the broader taxonomy, the PIC18F4515 belongs to the 8-bit MCU category, then to the flash-microcontroller family, then to the PIC18 enhanced-flash series, and finally to the integrated circuit (semiconductor) class. It is built on CMOS process technology and includes nanoWatt power management, which makes it suitable for both battery-powered and line-powered applications. Key differentiating features include a 10-bit ADC with up to 13 input channels, an internal oscillator block programmable from 31 kHz to 8 MHz, a hardware 8x8 single-cycle multiplier, and a Fail-Safe Clock Monitor that allows safe shutdown if the primary clock fails. The device also provides a separate RC-oscillator-backed Watchdog Timer for independent system recovery. Architecturally, the PIC18F4515 uses a Harvard-class RISC core with separate program and data buses, allowing instruction fetch and data access to occur in the same cycle. The on-chip Flash supports self-programming under software control, enabling field firmware updates and bootloader-style in-application re-flashing without an external programmer. Typical applications include industrial control panels, sensor interface nodes, USB-to-UART bridges, motor-control signal conditioning, and home appliances. The wide peripheral set and nanoWatt idle modes also suit it for low-power remote sensor nodes and HVAC thermostat controllers. When designing with this device, ensure the Vdd decoupling network uses a 100 nF ceramic cap placed within 5 mm of each Vdd pin and that the MCLR pin is pulled high through a 10 kohm resistor with a 100 nF cap to ground for in-circuit serial programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

Cotação Contato

PIC18F4515-I/P

PIC18F4515-I/P - 8-bit 40MHz 48KB Flash MCU 40-PDIP | Microchip

The Microchip PIC18F4515-I/P is an 8-bit PIC18F-series microcontroller running at 40 MHz with 48 KB of Flash program memory (24K x 16 words), 3,968 bytes of SRAM, and 256 bytes of EEPROM, packaged in a 40-pin PDIP (Plastic Dual-In-line Package) for through-hole industrial and educational designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals. The PIC18F family uses a modified Harvard RISC architecture with 16-bit instructions and 8-bit data path, designed by Microchip as the high-performance tier of their 8-bit portfolio and widely deployed in motor control, instrumentation, and embedded control. Key features include the 40 MHz internal oscillator support, nanoWatt Technology for low-power sleep modes, a 10-bit ADC with up to 13 input channels, two USART modules, an MSSP (Master Synchronous Serial Port) supporting SPI and I2C, two CCP (Capture/Compare/PWM) modules plus an enhanced ECCP, and a parallel slave port for external bus interfacing. The 36 digital I/O pins are 5V tolerant, with hardware PWM and interrupt-on-change capability. Architecturally, the device uses a 16-bit modified Harvard core with 32 KB of linear program addressing, an 8x8 hardware multiplier, and a priority-interrupt controller. The 48 KB Flash supports self-programming, enabling in-field firmware updates via bootloader, and the nanoWatt Technology suite provides deep-sleep current in the microamp range for battery-backed applications. Typical applications include industrial control panels, HVAC fan and damper controllers, security and alarm panels, low-end automotive body modules, instrumentation front-ends, and educational/development platforms such as the PICDEM board ecosystem, where the 40-pin PDIP allows easy breadboard prototyping. When designing with this part, ensure the MCLR reset pin is properly pulled up with a 10 kohm resistor and that VDD decoupling includes a 100 nF ceramic capacitor placed within 5 mm of each power pin. Programming is supported via the ICSP interface using the MPLAB PICkit 5, ICD 4, or MPLAB X IDE 6.x toolchain, with no external crystal required when using the internal oscillator. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the PIC18F family, and practical design notes drawn from the manufacturer datasheet - content not found on any single distributor or manufacturer page.

Cotação Contato

PIC18F4515T-I/PT

PIC18F4515T-I/PT - 8-Bit 40MHz 48KB Flash MCU TQFP-44 | Microchip

The Microchip Technology PIC18F4515T-I/PT is an 8-bit PIC18F-family microcontroller (MCU) running at up to 40 MHz, integrating 48 KB of Flash program memory organized as 24K x 16 words, 3.8 KB of data RAM, and a 10-bit Analog-to-Digital (A/D) converter, housed in a 44-pin TQFP (10x10 mm) package. The part carries the "T" tape-and-reel packaging suffix and the "I" industrial temperature grade (-40C to +85C). A PIC microcontroller is a compact single-chip computer that integrates a CPU, program memory, RAM, peripherals (A/D converters, timers, communication ports), and I/O on one die. PIC18F-series parts use an enhanced 8-bit RISC core with 16-bit instructions and 8-bit data, scaling from simple 18-pin devices up to 80-pin parts. PIC MCUs sit within the broader hierarchy of microcontrollers -> embedded processors -> semiconductors, and are widely used for cost-sensitive real-time control. This PIC18F4515T-I/PT specifically targets mid-pin-count designs that need abundant I/O and an integrated A/D. Key features include 36 digital I/O pins, a 10-bit A/D converter with up to 13 input channels, nanoWatt Technology power management for low-power sleep modes, an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), a Master Synchronous Serial Port (MSSP) supporting SPI and I2C, up to four 8/16-bit timers, and a Capture/Compare/PWM (CCP) module. The device operates from 4.2 V to 5.5 V. Architecturally, the PIC18F4515 uses an enhanced Harvard architecture with separate program and data buses, a 31-level hardware stack, and a 16-bit instruction word. The internal oscillator options and PLL block reduce external component count. nanoWatt Technology adds multiple idle/sleep modes with dynamic clock switching for battery-aware designs. Typical applications include industrial control panels, HVAC control boards, motor control signal conditioning, automotive body electronics, sensor interface front-ends, and consumer white goods. The 36 I/O lines and 13-channel ADC make it a strong fit for multi-channel analog monitoring boards. When designing with this MCU, place a 0.1 uF decoupling capacitor adjacent to every VDD/VSS pair, follow Microchip's recommended oscillator layout if a crystal is used, and ensure MCLR has its required pull-up network. ICSP/ICD programming requires the standard 5-pin Microchip header. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone datasheet.

Cotação Contato

PIC18F452-E/L

PIC18F452-E/L - 8-bit PIC MCU, 32KB Flash, 40MHz, 44-PLCC | Microchip

The Microchip Technology PIC18F452-E/L is an 8-bit RISC PIC18 microcontroller featuring 32KB of Flash program memory, 1536 bytes of RAM, and 256 bytes of EEPROM, operating at up to 40MHz (10 MIPS) in a 44-pin PLCC (J-Lead) package. It delivers 34 digital I/O lines, an 8-channel 10-bit Analog-to-Digital converter, two Capture/Compare/PWM modules, an MSSP configurable as SPI or I2C, and a USART for asynchronous or synchronous serial communication. The extended (-E) temperature grade supports 4.2V to 5.5V operation across the industrial range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and peripherals such as timers, ADCs, and communication interfaces into one IC. The PIC18F family sits at the upper end of Microchip's 8-bit portfolio, with an enhanced instruction set, hardware multiplier, and 16-bit-wide instruction words that double throughput versus the baseline PIC16 architecture. Within the broader taxonomy, the PIC18F452 belongs to the PIC18F45x sub-family, sharing pinout and code compatibility with PIC18F242/442/252/452 devices in 28- and 40/44-pin packages. Key features of the PIC18F452-E/L include self-programmability for in-application firmware upgrades, an ICD (In-Circuit Debugger) interface for development, nanoWatt Technology power management with multiple idle and sleep modes, and code protection via configuration bits. The 40MHz clock provides 10 MIPS execution, while the 8-channel 10-bit ADC supports up to 8 analog inputs for sensor acquisition. The two CCP modules deliver flexible PWM, capture, and compare functions for motor control or timing applications. Typical applications span industrial control systems, HVAC equipment, automotive body electronics, sensor signal conditioning, and embedded control panels. The wide 4.2V-5.5V supply tolerance and robust peripheral set make it well suited to 5V legacy designs that require deterministic real-time response without resorting to a 32-bit core. Design consideration: choose the PIC18F452-I/L variant for room-temperature-only designs to reduce cost; choose PIC18F452-E/L when industrial temperature tolerance is required. Existing PIC18F452 PCB layouts can be reused if the MCU package footprint matches. This page synthesizes distributor pricing, drop-in replacement alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

PIC18F452-E/ML

PIC18F452-E/ML - 8-bit MCU, 32KB Flash, 40MHz, 44-QFN | Microchip

The Microchip Technology PIC18F452-E/ML is an 8-bit RISC CMOS FLASH-based microcontroller delivering 10 MIPS (100 ns instruction execution) at 40 MHz, packaged in a 44-lead QFN (8x8 mm) with 32KB of program memory (16K x 16) and 1536 bytes of RAM. The -E suffix denotes the Extended industrial temperature grade (-40C to +125C), and /ML denotes the lead-free QFN surface-mount package. What is a PIC18F 8-bit microcontroller? The PIC18F family is Microchip's high-performance 8-bit architecture built on a Harvard RISC core, upward compatible with PIC16C5X/PIC12CXXX/PIC16CXX/PIC17CXX devices. It targets mid-range embedded designs requiring more code space, more peripherals, and faster throughput than the PIC16F baseline. In the broader taxonomy: PIC18F -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. This positioning makes it a workhorse for industrial control, instrumentation, and automotive subsystems. Key features include 256 bytes of EEPROM, self-programming capability, an ICD (In-Circuit Debugger) interface, two Capture/Compare/PWM modules, an 8-channel 10-bit Analog-to-Digital converter, and a synchronous serial port configurable as either 3-wire SPI or 2-wire I2C. The C-compiler-friendly instruction set contains only 77 single-word instructions, lowering the learning curve for new firmware developers. Architecturally, the PIC18F452 integrates a 16-bit wide instruction path with separate program and data buses, enabling single-cycle instruction fetch plus ALU operation in most cases. The 10-bit ADC with 8 channels supports acquisition of mixed analog signals from sensors, while the dual PWM modules provide flexible motor or power control. The extended temperature grade (E) plus QFN package make it suitable for thermally constrained or vibration-prone environments. Typical applications include industrial automation controllers, HVAC peripherals, automotive body modules, sensor signal conditioning, and battery-powered metering. The combination of EEPROM storage and self-programming also supports field-upgradeable end products. When designing with this device, ensure the 44-QFN exposed pad is properly soldered to a sufficiently large copper pour for thermal dissipation; QFN packages require careful PCB layout to avoid tombstoning. For new designs, consider the pin-compatible PIC18F4520 family which offers enhanced peripherals and nanoWatt technology for lower sleep current. This page synthesizes distributor pricing, drop-in alternatives from the PIC18F family, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

PIC18F452-E/P

PIC18F452-E/P - 8-Bit 40MHz Flash MCU | Microchip Technology

The Microchip Technology PIC18F452-E/P is an 8-bit CMOS Flash microcontroller with a 40 MHz clock speed, 32 KB of Flash program memory, 1536 bytes of RAM, 256 bytes of EEPROM, and 34 I/O pins in a 40-pin PDIP package. It also provides eight 10-bit analog-to-digital converter channels, two capture/compare/PWM modules, and serial interfaces configurable for SPI or I2C. A microcontroller is a programmable integrated circuit that combines a CPU core, memory, digital I/O, timers, communications peripherals, and analog conversion functions on one semiconductor die. The PIC18F452 belongs to the PIC18 8-bit microcontroller family, which is part of the broader embedded-controller hierarchy: PIC18 MCU, 8-bit microcontroller, embedded controller, and embedded semiconductor. This integration allows one device to replace separate processor, timer, communications, and analog-interface components in compact control systems. Key features include 10 MIPS execution performance, a 77-instruction single-word instruction set, 32 KB of self-programmable Flash memory, 1536 bytes of data RAM, and 256 bytes of EEPROM. The eight-channel 10-bit ADC supports analog sensor acquisition, while the configurable serial peripheral interface supports either 3-wire SPI or 2-wire I2C communication. The operating supply range shown in the verified data is 4.2 V to 5.5 V. The PIC18F452 architecture provides one 8-bit and three 16-bit timers, as identified by the supplied technical references, together with programmable digital I/O and PWM resources. These peripherals make it possible to measure time, capture input events, generate PWM outputs, acquire analog signals, and communicate with external sensors or controllers without requiring separate logic devices. Its Flash-based program memory also supports field reprogramming when the application requires self-programming. Typical applications include industrial process-control equipment, environmental monitoring, data acquisition, appliance controllers, instrumentation, and compact embedded products. The eight ADC channels are useful for temperature, pressure, level, and other analog measurements, while SPI and I2C permit connection to displays, sensors, memory devices, and communication transceivers. Its 34 I/O pins also provide ample control and monitoring capacity for moderately complex embedded systems. Designers should preserve adequate decoupling around the supply pins and route oscillator, reset, analog, and communication signals according to the manufacturer’s recommendations. Firmware must also account for the PIC18F452’s peripheral configuration, interrupt behavior, ADC acquisition requirements, and operating voltage range. The -E grade and PDIP package should be checked against production temperature, environmental, and board-assembly requirements before design release. This page consolidates the verified manufacturer and distributor information, distinguishes the available same-package alternatives, identifies missing pricing and package-level details, and adds practical application guidance that is not presented as a substitute for the complete Microchip PIC18FXX2 Data Sheet 39564c.

Cotação Contato

PIC18F452-I/L

PIC18F452-I/L - 8-bit 40MHz 32KB Flash MCU | Microchip 44-PLCC

The Microchip Technology PIC18F452-I/L is an 8-bit enhanced flash microcontroller from the PIC18F family, operating at up to 40 MHz (10 MIPS) and packaged in a 44-pin PLCC (16.59 x 16.59 mm) form factor. It integrates 32 KB of flash program memory (16K x 16), 1536 bytes of SRAM, and 256 bytes of EEPROM, and exposes 34 I/O pins suitable for embedded control. A microcontroller is a single-chip computer that combines a CPU, memory, and programmable peripherals. The PIC18F452 belongs to the 8-bit MCU class within the broader microcontroller hierarchy (8-bit MCU -> MCU -> embedded processor -> semiconductor). Its enhanced PIC18 core offers 77 single-word instructions and C-compiler-friendly architecture, making it popular for both educational and industrial designs. Key features include eight channels of 10-bit analog-to-digital conversion, two capture/compare/PWM modules, an MSSP configurable as SPI or I2C, a USART, an ICD (in-circuit debugger) interface, and self-programming flash. Operating voltage spans 4.2 V to 5.5 V, and the device supports nanoWatt power management for low-power applications. The architecture is a Harvard-type RISC design with a 16-bit instruction word and an 8-bit data path, allowing 100 ns instruction execution at 40 MHz. The wide operating range and rich peripheral set make it suitable for industrial automation, motor control, sensor conditioning, and consumer products requiring deterministic real-time response without an external DSP. Typical applications include industrial control panels, HVAC systems, motor-control boards, USB-to-serial bridges with an external interface IC, and instrumentation front-ends. Designers value the PIC18F452 for upward code compatibility with PIC16C5X, PIC12CXXX, PIC16CXX, and PIC17CXX devices. A key design consideration is the operating voltage: the 'I' suffix denotes an industrial temperature range of -40 C to +85 C and 4.2 V to 5.5 V supply. Designers migrating to the 'LF' variant must account for the 2.0 V to 5.5 V extended range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, supporting faster BOM decisions and supply-chain risk mitigation for the PIC18F452-I/L.

Cotação Contato

PIC18F452-I/P

PIC18F452-I/P - 8-bit 40MHz 32KB Flash MCU 40-PDIP | Microchip

The Microchip Technology PIC18F452-I/P is an 8-bit PIC18F-family CMOS Flash microcontroller delivering up to 10 MIPS (40 MHz) performance in a 40-pin PDIP (0.600") through-hole package. It integrates 32 KB of Flash program memory (16K x 16), 1536 bytes of SRAM, and 256 bytes of EEPROM data memory. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, plus configurable peripherals. PIC18F devices belong to Microchip's 8-bit PIC family, which combines RISC architecture with C-compiler-friendly instruction set and NanoWatt power management. Within the broader taxonomy, PIC18F452 sits under Microcontroller (MCU) -> 8-bit MCU -> PIC18F enhanced Flash family -> embedded computing IC -> semiconductor. Key features include 34 digital I/O pins, an 8-channel 10-bit Analog-to-Digital Converter (ADC), two Capture/Compare/PWM (CCP) modules, an enhanced USART supporting RS-232/RS-485, a Master Synchronous Serial Port configurable as SPI (3-wire) or I2C (2-wire), one 8-bit and three 16-bit timers, self-programming capability, and ICD in-circuit debugging support. Operating voltage spans 4.2 V to 5.5 V across the industrial -40C to +85C temperature range. The PIC18F452 uses an enhanced Harvard architecture with a 16-bit instruction word and separate program/data buses, achieving 100 ns instruction execution. The 77 single-word instruction set simplifies C compiler code generation while the 16-level hardware stack and 8 x 8 hardware multiplier accelerate arithmetic throughput. NanoWatt technology adds multiple power-managed modes (Idle, Sleep) for battery-aware designs. Typical applications include industrial control panels, HVAC and appliance controllers, sensor signal conditioning nodes, RS-232/RS-485 sensor gateways, motor control interfaces (using CCP/PWM), low-cost data acquisition with on-chip ADC, and educational/COMPILER development platforms. The wide 4.2-5.5 V range also suits USB-powered and 5 V bus systems. When designing with this part, ensure oscillator stability (HS or XT modes), use adequate decoupling (100 nF near each VDD/VSS pair), and verify ADC acquisition time settings for chosen source impedance. Note the I/P suffix denotes industrial temperature grade and PDIP-40 package. This page synthesizes distributor pricing across DigiKey, Mouser and LCSC, drop-in PIC18F alternatives, and practical design notes that are not found in the standalone manufacturer datasheet.

Cotação Contato

PIC18F452-I/PT

PIC18F452-I/PT - 8-Bit 40MHz 32KB Flash MCU 44-TQFP | Microchip

The Microchip Technology PIC18F452-I/PT is a high-performance 8-bit PIC18 microcontroller running at 40MHz (10 MIPS) with 32KB of Flash program memory and 1.5KB of RAM, housed in a 44-pin TQFP (10x10 mm) package. It integrates 256 bytes of EEPROM, 34 digital I/O lines, and 8 channels of 10-bit Analog-to-Digital conversion, making it a versatile single-chip solution for embedded control systems. A microcontroller (MCU) is an integrated circuit combining a CPU, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and configurable peripherals (timers, ADC, communication ports) on a single silicon die. MCUs form the lowest tier of the computing hierarchy, embedded beneath microprocessors in everything from consumer appliances to industrial controllers, and they execute firmware directly from on-chip Flash rather than external memory. The PIC18 family is Microchip's high-tier 8-bit line, providing 16-bit-wide instructions and a C compiler-friendly architecture. Key features of the PIC18F452-I/PT include a 10 MIPS execution rate (100 ns instruction cycle), 256 bytes of data EEPROM, an ICD-friendly In-Circuit Debugger interface, two Capture/Compare/PWM modules, a Master Synchronous Serial Port configurable as either 3-wire SPI or 2-wire I2C, and a USART with 9-bit address masking. The device supports self-programming, allowing firmware upgrades in the field without external programmer hardware, and it consumes microamp-range currents in Sleep mode through nanoWatt technology. Architecturally, the PIC18F452 uses an enhanced Harvard architecture with separate program and data buses, a 16-bit instruction word (vs 14-bit in PIC16), and a hardware multiplier capable of 8x8 single-cycle operations. Its 40 MHz internal clock can be derived from crystals, resonators, or internal RC oscillators, and the wide 4.2V to 5.5V supply range suits both battery and line-powered designs. Typical applications include industrial automation controllers, automotive body and HVAC modules, consumer appliance control boards, low-end data acquisition systems, and educational/development platforms where code portability from older PIC16/PIC17 designs is required. The 8-channel ADC is well matched to sensor multiplexing in instrumentation. When designing with this device, note that the 40-pin PDIP and 44-pin TQFP variants share the same peripheral set but differ in available I/O count; the TQFP version exposes all 34 I/O pins including additional high-priority interrupts. Always provide adequate decoupling (0.1 uF + 10 uF bulk) near VDD/AVDD/VSS pins.

Cotação Contato

PIC18F4520-E/ML

PIC18F4520-E/ML - 8-bit 25MHz 32KB Flash MCU, 44-QFN | Microchip

The Microchip Technology PIC18F4520-E/ML is an 8-bit enhanced flash microcontroller from the PIC18F family, delivering up to 10 MIPS performance at 3V in a 44-pin QFN (8x8 mm) surface-mount package. It integrates 32KB of Flash program memory, 1536 bytes of SRAM, and 256 bytes of EEPROM data memory, with a 25 MHz (40 MHz input clock) CPU core. The -E suffix denotes the extended industrial temperature grade (-40C to +125C operating range). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), peripherals (timers, ADC, communication ports), and interrupt logic on one die. Within the broader taxonomy, MCUs sit under microprocessors, themselves a subset of processors and digital logic integrated circuits. PIC18F-series microcontrollers use Microchip's enhanced Harvard RISC architecture with C-compiler-optimized instruction set and a single-cycle hardware 8x8 multiplier, balancing deterministic real-time control with code density. The PIC18F4520 specifically occupies the high-pin-count, high-memory tier of the PIC18F2x20/4x20 family and is pin-compatible with the PIC18F4420 and PIC18F2520 footprints. Key differentiating features of the PIC18F4520-E/ML include: 36 digital I/O pins across five ports (RA, RB, RC, RD, RE), a 10-bit ADC with up to 13 input channels, two analog comparators, two CCP modules plus one ECCP (enhanced capture/compare/PWM), three 16-bit timers plus one 8-bit timer, hardware USART (EUSART), MSSP (SPI/I2C), a 31 kHz to 8 MHz internal oscillator block with 4x PLL (up to 32 MHz), fail-safe clock monitor, separate watchdog RC oscillator, and nanoWatt power management with idle and sleep modes. This is a complete set of legacy-friendly peripherals in a small 8x8 mm QFN. Architecturally, the PIC18F4520 implements an enhanced 16-bit instruction word with 8-bit data path, single-cycle hardware multiply, and a 32-level hardware stack. The internal oscillator and 4x PLL allow designs without an external crystal while still meeting timing requirements for 10 MIPS operation. nanoWatt technology provides dynamic clock switching and selective peripheral control for battery-friendly sleep currents. The device operates from 4.2V to 5.5V (extended temperature variant). Typical applications include industrial control boards, sensor signal conditioning front-ends, low-power motor control, USB-free legacy embedded systems (where the PIC18F4550 is preferred if USB is needed), HVAC thermostats, educational and prototyping platforms, and retrofits of PIC16F877A designs where higher performance and additional peripherals are required. The 44-QFN (ML) variant is preferred for compact, surface-mount assemblies where the larger 44-TQFP or 40-PDIP footprints are too tall or too large. Design tip: the 44-pin QFN (8x8 mm) has an exposed thermal pad that must be soldered to the PCB ground plane for electrical and thermal performance - do not leave the e-pad floating. Provide adequate input bulk capacitance on VDD and AVdd to support ADC accuracy. Use the internal oscillator with PLL for cost-sensitive designs, but reserve an external crystal footprint if the application requires USB-grade clock accuracy or fail-safe clock monitor switching.

Cotação Contato

PIC18F4520-E/P

PIC18F4520-E/P - 8-Bit 40MHz 32KB Flash MCU DIP-40 | Microchip

The Microchip Technology PIC18F4520-E/P is an 8-bit RISC microcontroller based on the enhanced PIC18 architecture, delivering up to 10 MIPS performance at 3V in a 40-pin PDIP through-hole package. It integrates 32KB of Flash program memory, 1536 bytes of SRAM, and 256 bytes of EEPROM, with 36 digital I/O pins and a 13-channel 10-bit ADC. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, memory (Flash, SRAM, EEPROM), peripherals (ADC, timers, UART, SPI, I2C), and I/O on a single silicon die. Within the broader taxonomy, the PIC18F4520 belongs to: microcontroller -> 8-bit MCU -> enhanced Flash MCU -> RISC MCU -> embedded controller -> semiconductor IC. The PIC18F family is widely adopted for cost-sensitive, deterministic embedded designs and sits between the older PIC16 mid-range family and the 16-bit dsPIC/PIC24 families in Microchip's portfolio. Key features of the PIC18F4520 include a hardware 8x8 single-cycle multiplier, nanoWatt power management with multiple idle/sleep modes, a fail-safe clock monitor, and an internal 31 kHz to 8 MHz oscillator block with 4x PLL (for system clock up to 40 MHz). Four 16-bit timers/counters, two capture/compare/PWM modules, an enhanced USART, MSSP (SPI/I2C), and a parallel slave port round out the peripheral set. EUSART and PWMs are commonly used for motor and sensor interfacing. The architecture uses a 16-bit instruction word with an 8-bit data path, providing C-compiler-friendly RISC design while retaining the deterministic interrupt latency PIC MCUs are known for. The wide 4.2V to 5.5V operating range simplifies integration with 5V sensors and drivers, while 1.8V to 3.6V operation at reduced clock is supported for low-power designs. nanoWatt technology can drop supply current below 1 uA in sleep mode. Typical applications include industrial control panels, HVAC thermostats, motor control (BLDC/fan/pump), low-end embedded data acquisition, smart metering, automotive body electronics, and USB-to-UART bridges when paired with an external PHY. The 40-pin PDIP footprint remains popular for through-hole prototype boards, educational platforms, and replacement of legacy 8051 designs. When designing with this part, choose the industrial temperature grade (-40C to +125C) for outdoor/automotive use; the E suffix here denotes the extended temperature range. Ensure decoupling capacitors are placed within 5 mm of the VDD/VSS pins and verify oscillator start-up time under your load conditions before locking the BOM. This page synthesizes distributor pricing as of 2026-09-27, drop-in DIP-40 alternatives, and practical design notes that complement the manufacturer datasheet for engineers evaluating legacy PIC18 designs.

Cotação Contato

PIC18F4520-E/PT

PIC18F4520-E/PT - 8-bit MCU 32KB Flash 40MHz TQFP-44 | Microchip

The Microchip Technology PIC18F4520-E/PT is an 8-bit RISC microcontroller from the PIC18 family featuring a 32KB Flash program memory, 1536 bytes of SRAM, 256 bytes of EEPROM, and a maximum CPU clock speed of 40 MHz (10 MIPS), housed in a 44-pin TQFP (PT) surface-mount package. It integrates 36 digital I/O pins, thirteen 10-bit ADC channels, two CCP/PWM modules, four timers, two analog comparators, and a USART with an enhanced addressable USART for robust serial communications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM/EEPROM), and a fixed set of peripherals onto one silicon die. 8-bit MCUs sit under the broader category of microcontrollers, which in turn belong to the embedded computing and semiconductor taxonomy. The PIC18 family's RISC architecture executes most instructions in a single 200 ns cycle (4 clock periods at 40 MHz), giving it deterministic timing for control loops. The 10-bit ADC allows direct sensing of analog signals (temperature, current, voltage), while the nanoWatt power-management modes extend battery life in always-on designs. Key differentiators include the Enhanced Flash program memory (In-Circuit Serial Programming via two pins, allowing firmware update without removing the chip), 100K erase/write cycle endurance on the Flash, and an industrial-grade -40C to +125C operating temperature range ("E" temperature suffix). Hardware peripherals such as the Parallel Slave Port enable high-throughput memory-mapped transfers to external devices, while the Master Synchronous Serial Port (MSSP) module supports SPI and I2C interfaces. The integrated 10-bit ADC can reach 100K samples per second, suitable for closed-loop control in motor and power-conversion applications. Typical applications include industrial automation and process control, automotive body and accessory ECUs, HVAC controller boards, sensor signal conditioning front ends, and consumer appliances requiring cost-sensitive 8-bit control with on-chip peripherals. The 5V native I/O also makes the part well suited to legacy 5V system designs. When designing with this device, evaluate vectored interrupt latency and register-bank switching overhead - these architectural choices favor bit-manipulation and GPIO-heavy code, with weaker fit for large arithmetic or DSP workloads. This page synthesizes distributor pricing, drop-in alternatives, and application guidance beyond the manufacturer datasheet.

Cotação Contato

PIC18F4520-I/P

PIC18F4520-I/P - 8-Bit 40MHz 32KB Flash MCU | Microchip | DIP-40

The Microchip Technology PIC18F4520-I/P is a high-performance 8-bit PIC18 microcontroller featuring 32KB (16K x 16) of Flash program memory, 1.5KB RAM, and 256 bytes of EEPROM, operating at up to 40 MHz (10 MIPS) in a 40-pin PDIP through-hole package. The integrated peripherals include a 10-bit Analog-to-Digital Converter (ADC) with up to 13 channels, a USART, an MSSP supporting SPI and I2C, two comparators, capture/compare/PWM modules, and nanoWatt power-management technology for low-power applications. An 8-bit microcontroller (MCU) is a small computing device built around a CPU with an 8-bit data path, integrated Flash program memory, RAM, and a fixed set of peripherals. The PIC18 family is Microchip's enhanced mid-range line, sitting between the baseline PIC10/12/16 series and the 16-bit dsPIC/PIC24 families. PIC18 MCUs are widely deployed in industrial control, consumer electronics, automotive subsystems, and educational platforms because of their deterministic RISC architecture, low cost, and the mature MPLAB X toolchain. Key features of the PIC18F4520-I/P include 36 digital I/O pins, four timer modules (one 8-bit and three 16-bit), two capture/compare/PWM (CCP) modules plus one enhanced CCP (ECCP), an internal 31 kHz-8 MHz oscillator with 4x PLL, Fail-Safe Clock Monitor, and a separate Watchdog Timer with its own RC oscillator. The 40-pin PDIP package simplifies prototyping and breadboard-based designs. Operating voltage spans 4.2 V to 5.5 V, and the industrial temperature grade extends from -40C to +85C. Internally, the device uses a C-compiler-optimized RISC architecture with a hardware 8x8 single-cycle multiplier, a non-multiplexed 16-bit program bus, and a 16-bit instruction word. nanoWatt technology adds multiple idle/sleep modes, ultra-low-power wake-on-interrupt, and a real-time clock using Timer1, enabling battery-friendly designs where average current draw can drop into the microamp range. The Fail-Safe Clock Monitor provides automatic clock-source backup in safety-critical applications. Typical applications include industrial control panels, sensor interface nodes, motor-control front ends (with ECCP for PWM), USB-to-serial bridges (using a USART plus external converter), home appliance user interfaces, and low-cost data-acquisition front ends that benefit from the 10-bit ADC. Hobbyists and educators also rely on the PIC18F4520 as a teaching vehicle because of its breadboard-friendly DIP form factor and abundant example code. When designing with this device, ensure the oscillator configuration bits match the chosen clock source and that decoupling capacitors (100 nF plus a bulk 10 uF) are placed within 5 mm of the supply pins. For low-power designs, verify the ADC acquisition time and avoid leaving analog inputs floating; unused digital I/O should be configured as outputs low to minimize transient current. This page synthesizes distributor pricing as of 2026-09-27, drop-in PIC18 alternatives in the same 40-pin PDIP footprint, and practical design notes not found in the manufacturer datasheet, giving engineers a single decision-ready reference.

Cotação Contato

PIC18F4520-I/P

PIC18F4520-I/P - 8-Bit MCU 40MHz 32KB Flash DIP-40 | Microchip

The Microchip Technology PIC18F4520-I/P is an 8-bit PIC18 enhanced flash microcontroller delivering up to 40 MHz clock (10 MIPS at 3V-5V) with 32KB (16K x 16) flash program memory, 1,536 bytes of RAM, and 256 bytes of EEPROM, housed in a 40-pin plastic DIP (PDIP-40) package with 36 general-purpose I/O lines. A microcontroller unit (MCU) integrates a processor core, program memory, data memory, and peripherals on a single die, forming the lowest tier of the embedded control hierarchy: embedded controller -> microcontroller -> system-on-chip. The PIC18 family extends the classic PIC16 RISC architecture with a C-compiler-optimized instruction set and an 8x8 single-cycle hardware multiplier. Key features include nanoWatt Technology power management (Idle and Sleep modes with multiple wake sources), an internal oscillator block covering 31 kHz to 8 MHz with 4x PLL, a Fail-Safe Clock Monitor that safely shuts down the system if the primary clock fails, and a watchdog timer with its own independent RC oscillator. The peripheral set comprises a 10-bit, up to 13-channel analog-to-digital converter, two CCP modules plus one enhanced CCP (ECCP) supporting PWM, capture and compare, an enhanced USART for serial communication, a Parallel Slave Port, three 16-bit timers plus one 8-bit timer, and an In-Circuit Debug/Programming interface (ICSP) using the PGC/PGD pins. Typical applications include industrial control panels, motor control and relay driver boards, legacy equipment maintenance, hobbyist and educational prototyping, and laboratory instrumentation. The DIP-40 package is especially valuable for breadboarding, socketed field replacement, and through-hole production. A key design consideration: the -I suffix specifies the industrial temperature range of -40C to +85C and a supply range of 4.2V to 5.5V; design the power rail and brown-out settings accordingly. This page synthesizes distributor pricing, verified drop-in alternatives, complete pinout data, and practical design notes not found in the manufacturer datasheet.

Cotação Contato

PIC18F4520-I

PIC18F4520-I/P - 8-bit MCU 32KB Flash 40MHz DIP-40 | Microchip

The Microchip Technology PIC18F4520-I/P is an 8-bit enhanced Flash microcontroller delivering up to 10 MIPS performance at 40 MHz, with 32 KB (16K x 16) Flash program memory, 1,536 bytes of SRAM, 256 bytes of EEPROM, and 36 general-purpose I/O pins, housed in a 40-pin PDIP package rated from -40C to +85C. An 8-bit microcontroller (MCU) is a single integrated circuit that contains a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters. Within the power-management hierarchy of embedded systems, the MCU sits at the application layer, coordinating sensors, actuators, and communication interfaces. The PIC18 family is Microchip's enhanced mid-range 8-bit architecture, a successor to the PIC16 line, optimized for C compiler efficiency. Key differentiating features include a C-compiler-optimized RISC core with an 8 x 8 single-cycle hardware multiplier, nanoWatt Technology power-management modes with an internal oscillator block covering 31 kHz to 8 MHz, Fail-Safe Clock Monitor, and an extended instruction set. A 10-bit analog-to-digital converter with up to 13 channels, two CCP (Capture/Compare/PWM) modules plus one ECCP module, an enhanced USART, and a parallel slave port round out the peripheral set. Architecturally, the PIC18F4520 uses a modified Harvard architecture with a 16-bit instruction word and 8-bit data path, executing most instructions in a single cycle (200 ns at 40 MHz crystal-derived Fosc/4). Operation spans a 4.2 V to 5.5 V supply, making it well suited to 5 V industrial logic environments where 3.3 V MCUs require level shifting. Typical applications include industrial control and automation, legacy equipment maintenance and upgrades, motor control via the ECCP module, and educational/hobby embedded platforms, where the through-hole DIP-40 package simplifies prototyping and socketed replacement. A key design consideration is supply voltage: the -I industrial temperature version requires 4.2 V to 5.5 V, so a 5 V regulated rail and 5 V-tolerant peripherals are assumed; the LF variant (PIC18LF4520) covers 2.0 V to 5.5 V for low-voltage designs. This page synthesizes distributor pricing, verified drop-in alternatives within the PIC18 DIP-40 family, pinout data, and practical design notes not found in the manufacturer datasheet, providing engineers a single decision-ready reference as of 2026-10-12.

Cotação Contato

PIC18F4520-I/PT

PIC18F4520-I/PT - 8-Bit MCU 32KB Flash 40MHz TQFP-44

The Microchip Technology PIC18F4520-I/PT is an 8-bit PIC microcontroller from the PIC18F family, delivering up to 40 MIPS throughput from a 40 MHz internal clock and integrating 32 KB of Enhanced Flash program memory with 1.5 KB of internal SRAM and 256 bytes of EEPROM, housed in a 44-pin TQFP (10x10) package. According to Microchip's product listing, the device is built on an enhanced RISC Harvard architecture with 75 instructions and a 16-bit wide instruction set, providing deterministic interrupt response and single-cycle hardware multiply support. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile Flash program memory, volatile SRAM, EEPROM, and a rich peripheral set (timers, A/D, USART, I2C, SPI, PWMs, and I/O ports) into one package. The PIC18F sits in the upper tier of Microchip's 8-bit portfolio, offering nanoWatt power management, 10-bit ADC, and Extended Instruction Set capability. It belongs to the broader category of embedded controllers in the power management and microcontroller pyramid, used whenever a deterministic, low-cost control plane is needed. Key differentiating features include 36 digital I/O pins, a 13-channel 10-bit A/D converter with 100 ksamples/s throughput, two analog comparators, two CCP modules and one ECCP module, hardware USART with LIN support, MSSP for SPI/I2C, and four timer modules (one 8-bit, three 16-bit). The Enhanced Flash supports 100K erase/write cycles typical and self-programmability under firmware control, enabling bootloaders and field updates without external programmers. The architecture uses a 16-bit program path and an 8-bit data path, with 31 interrupt vectors and a vectored priority scheme. The ADC can be triggered from a dedicated timer for deterministic sampling. With five operating modes (Run, Idle, Sleep, Doze, and RC_RUN) plus the nanoWatt regulator, the device typically draws 7 µA in Sleep and 1.6 mA at 4 MHz/3.3 V, allowing years of operation from a battery in sensor applications. Typical applications include industrial control panels, sensor hubs with analog front-end conditioning, automotive body and HVAC sub-systems, USB-to-UART bridges, motor control driver boards, and consumer white goods where deterministic performance, low BOM cost, and long-term firmware stability are required. The wide operating range (2.0 V to 5.5 V) makes the PIC18F4520 equally comfortable in 3.3 V battery-backed and 5 V mains-referenced designs. When designing with this part, observe the boundary-scan rules in the in-circuit debug header (ICD/ICSP) and provide adequate decoupling: place a 100 nF ceramic as close as possible to each VDD/VSS pair plus a 10 µF bulk on the main rail. The PLCC vs TQFP package choice affects socket availability and PCB rework; pick PT (TQFP-44) for surface-mount production and keep I/P (DIP-40) only for breadboard prototypes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

PIC18F4520-I/PT

PIC18F4520-I/PT - 8-Bit MCU 40MHz 32KB Flash TQFP-44 | Microchip

The Microchip Technology PIC18F4520-I/PT is an 8-bit PIC18 enhanced Flash microcontroller running at up to 40 MHz clock frequency, with 32 KB (16K x 16) of Flash program memory and 44-pin TQFP (10x10 mm) surface-mount package. An 8-bit microcontroller (MCU) is an integrated circuit that contains a processor core, program memory, data memory, and peripherals on a single chip, executing one instruction per cycle on 8-bit-wide data paths. Within the system hierarchy, the MCU sits at the heart of embedded control systems, ranking below application processors but above simple logic ICs in capability. The PIC18F4xxx family extends Microchip's mid-range PIC architecture with a 16-bit-wide instruction set, enhanced Flash endurance, and nanoWatt technology for low-power design. Key features of the PIC18F4520 include 10-bit analog-to-digital conversion across multiple channels, nanoWatt power management, capture/compare/PWM (CCP) modules, an enhanced CCP (ECCP) module, and a priority interrupt structure with three programmable external interrupts. Per the family datasheet, the device integrates one 8-bit timer, three 16-bit timers, and a watchdog timer, providing flexible timing resources without external components. Architecturally, the PIC18F4520 uses a Harvard architecture with separate program and data buses, an Enhanced Flash program memory with high write endurance, and linear addressing via the Phase-Locked Loop (PLL) that multiplies the oscillator input to reach the 40 MHz internal clock. The industrial-grade temperature rating (-40C to +85C, denoted by the -I suffix) suits harsh environments. Typical applications include industrial automation and control panels, automotive accessories (non-safety), instrumentation and data loggers, and consumer appliance control boards. The 10-bit ADC and CCP/PWM outputs make it well suited to sensor acquisition and motor or LED control. Design considerations: the 44-TQFP footprint requires careful decoupling of multiple VDD/VSS pairs, and the RB6/RB7 pins double as the In-Circuit Serial Programming (ICSP) clock and data lines - keep programming headers accessible. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet.

Cotação Contato

PIC18F4523-E/ML

PIC18F4523-E/ML - 8-bit MCU, 32KB Flash, 40MHz, 44-QFN | Microchip

The Microchip Technology PIC18F4523-E/ML is an 8-bit PIC microcontroller from the PIC18Fxx23 enhanced Flash family, delivering up to 40 MHz operation from 2.0 V to 3.3 V or 4.2 V to 5.5 V supplies. The device integrates 32 KB of Flash program memory (16K x 16), 1536 bytes of RAM, 256 bytes of EEPROM, and 36 digital I/O pins in a 44-pin VQFN (8x8 mm) exposed-pad package, qualified to the extended -40C to +125C automotive temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, I/O peripherals, and often analog blocks. The PIC18F family uses Microchip's enhanced 8-bit RISC architecture with a 16-bit instruction word and 8-bit data path, optimized for deterministic interrupt latency and C-compiler efficiency. Within the broader taxonomy, the PIC18F4523 sits at: 8-bit MCU -> enhanced PIC18 -> PIC18Fxx23 sub-family -> 40-pin class microcontrollers -> embedded computing -> semiconductor IC. Key differentiating features include an internal oscillator block, a 10-bit ADC with up to 13 channels, multiple PWM modules, an enhanced USART, an MSSP module for SPI and I2C, two comparators, and a 16-bit timer/counter. The /ML suffix denotes the QFN surface-mount package with extended (-40C to +125C) operating temperature, while the -E suffix indicates the extended automotive temperature grade. Architecturally, the PIC18F4523 leverages a Harvard bus structure with separate program and data paths, a hardware multiplier, and prioritized interrupts that allow deterministic response times in motor control and sensor fusion loops. The 40 MHz oscillator with 4x PLL option yields 10 MIPS throughput, sufficient for control loops, human-machine interface (HMI) refresh, and small protocol stacks such as Modbus RTU over RS-485. Typical applications include industrial automation controllers, automotive body and HVAC modules, sensor signal conditioning, USB-to-UART bridges (using the MSSP/USART), motor drive front-ends, and white-goods user-interface boards. The wide operating voltage range also supports 5V industrial 24V-bus designs after front-end regulation. When designing with the PIC18F4523-E/ML, plan the PCB land pattern to expose the QFN thermal pad and stitch vias to the inner ground plane for proper heat dissipation. The ICSP programming pins (PGC/PGD) must remain accessible in production layouts, and decoupling should be a 100 nF ceramic within 3 mm of each supply pin per Microchip's PIC18F family reference design. This page synthesizes distributor stock levels, drop-in PIC18F45xx alternatives from Microchip, and PCB layout considerations not always surfaced in the standalone datasheet.

Cotação Contato

Subcategorias

Produtos (35.000+)

PIC18F44K22T-I/MV - 16KB Flash XLP 8-bit MCU 40-UQFN | Microchip

PIC18F44K22T-I/PT - 8-bit 64MHz XLP MCU 16KB Flash | Microchip

PIC18F4510-I/P - 8-bit 40MHz 32KB Flash MCU | Microchip

PIC18F4515-E/ML - 8-bit 48KB Flash MCU, 44-VQFN | Microchip

PIC18F4515-E/P - 8-bit 48KB Flash MCU, 40-Pin PDIP | Microchip

PIC18F4515-E/PT - 8-Bit 48KB Flash MCU, 44-TQFP | Microchip

PIC18F4515-I/ML - 48KB Flash 8-bit MCU, 44-QFN | Microchip

PIC18F4515-I/P - 8-bit 40MHz 48KB Flash MCU 40-PDIP | Microchip

PIC18F4515T-I/PT - 8-Bit 40MHz 48KB Flash MCU TQFP-44 | Microchip

PIC18F452-E/L - 8-bit PIC MCU, 32KB Flash, 40MHz, 44-PLCC | Microchip

PIC18F452-E/ML - 8-bit MCU, 32KB Flash, 40MHz, 44-QFN | Microchip

PIC18F452-E/P - 8-Bit 40MHz Flash MCU | Microchip Technology

PIC18F452-I/L - 8-bit 40MHz 32KB Flash MCU | Microchip 44-PLCC

PIC18F452-I/P - 8-bit 40MHz 32KB Flash MCU 40-PDIP | Microchip

PIC18F452-I/PT - 8-Bit 40MHz 32KB Flash MCU 44-TQFP | Microchip

PIC18F4520-E/ML - 8-bit 25MHz 32KB Flash MCU, 44-QFN | Microchip

PIC18F4520-E/P - 8-Bit 40MHz 32KB Flash MCU DIP-40 | Microchip

PIC18F4520-E/PT - 8-bit MCU 32KB Flash 40MHz TQFP-44 | Microchip

PIC18F4520-I/P - 8-Bit 40MHz 32KB Flash MCU | Microchip | DIP-40

PIC18F4520-I/P - 8-Bit MCU 40MHz 32KB Flash DIP-40 | Microchip

PIC18F4520-I/P - 8-bit MCU 32KB Flash 40MHz DIP-40 | Microchip

PIC18F4520-I/PT - 8-Bit MCU 32KB Flash 40MHz TQFP-44

PIC18F4520-I/PT - 8-Bit MCU 40MHz 32KB Flash TQFP-44 | Microchip

PIC18F4523-E/ML - 8-bit MCU, 32KB Flash, 40MHz, 44-QFN | Microchip