Circuitos Integrados

S912XEQ384J3VAG

S912XEQ384J3VAG - 16-bit S12X MCU, 384KB Flash, 50MHz, 144-LQFP | NXP

The NXP Semiconductors S912XEQ384J3VAG is a 16-bit HCS12X microcontroller built around the S12X CPU core running at 50MHz bus speed, integrating 384KB (384K x 8) of on-chip Flash memory in a 144-pin LQFP package (20x20mm). The device is qualified to the AEC-Q100 automotive standard and supports an industrial-grade operating temperature range of -40C to +105C, making it suitable for harsh under-hood and chassis automotive environments. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working RAM, and a rich set of analog and digital peripherals. The HCS12X family extends the classic HCS12 architecture with the XGATE peripheral co-processor, an auxiliary RISC engine that offloads interrupt-driven I/O tasks from the main CPU to boost overall system throughput. Within the broader taxonomy, the S912XEQ384J3VAG sits under HCS12X -> S12X family -> 16-bit automotive MCU -> embedded microcontroller -> semiconductor. Key differentiating features include a 12-bit ADC with 3 us conversion time, an Enhanced Capture Timer (ECT) module, a Periodic Interrupt Timer (PIT), a Real-Time Interrupt (RTI), an XGATE co-processor for virtual peripherals, and flexible hardware-emulated EEPROM. System integrity is reinforced by a Memory Protection Unit (MPU) and supervisor/user execution modes, which are critical for ISO 26262-oriented automotive functional safety designs. Typical applications include automotive body controllers, CAN/LIN gateway nodes, instrument clusters, HVAC control modules, and industrial CAN-node endpoints. The 144-LQFP package exposes a generous I/O count and multiple timer/capture channels, which suit multi-sensor automotive designs. When designing with this device, reserve sufficient Flash endurance margin for the emulated EEPROM workload, and verify that the XGATE firmware is loaded alongside the S12X application image. Decoupling and ground-plane layout directly impact ADC noise performance - keep analog and digital return paths separated. This page synthesizes distributor pricing, AEC-Q100 status, application-fit context, and drop-in alternative candidates into a single reference not duplicated on the manufacturer datasheet, helping engineers and buyers make an informed part-selection decision.

USD $11,85 Em estoque

S912XEQ384J3VAL

S912XEQ384J3VAL - 16-bit HCS12X MCU 384KB Flash 50MHz | NXP

The NXP S912XEQ384J3VAL is a 16-bit HCS12X microcontroller integrating 384 KB of Flash, an XGATE co-processor and a 12-bit ADC in a 112-pin LQFP (20x20) package, qualified to AEC-Q100 Grade 1 over -40C to +105C. The S12X core runs up to 50 MHz (25 MHz bus) and is paired with the XGATE peripheral co-processor for offloading interrupts and virtual peripheral emulation, allowing deterministic real-time response in body and chassis ECUs. The on-chip memory map includes 384 KB of Flash, up to 20 KB of emulated EEPROM via FlexMemory, 16 KB RAM and 4 KB Data Flash. The XEQ sub-family adds a Memory Protection Unit (MPU) and supervisor/user modes for OEM-grade software isolation. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile data memory, and a wide range of on-chip peripherals such as ADCs, timers and communication controllers. Within the broader semiconductor taxonomy, microcontrollers sit under microprocessors, which sit under digital ICs and ultimately integrated circuits. The S12X specifically extends the classic HCS12 instruction set with a richer addressing mode set and paged memory management, while the XGATE engine supplies a low-latency auxiliary execution path used by NXP for virtual peripherals that historically required external logic. Key features of this part include CAN 2.0 controllers, SCI/SPI/IIC peripherals, 8-channel 16-bit Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real-Time Interrupt (RTI), and 12-bit ATD channels with 3 us conversion. The integrated voltage regulator operates from 1.8 V/2.8 V/5 V MCU rails, supporting automotive 12 V and 24 V battery systems after external regulation. The LQFP-112 footprint supports legacy automotive PCB tooled for Freescale S12X designs. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, and industrial CAN nodes that require ASIL-relevant firmware partitioning with on-chip supervisor/user separation. The XGATE allows deterministic handling of CAN and PWM without interrupting the S12X core, enabling tight PID control loops. The 12-bit ATD and 16-bit ECT provide simultaneous sampling and input capture needed for motor control and sensor interfacing. When designing with the S912XEQ384J3VAL, decouple all four VDDX/VSSX pairs near the pins and route the XFC capacitor carefully per the datasheet; an undersized XFC cap causes POR faults at low temperature. The MCU must boot through BDM or via the secure serial bootloader unless an unsecure-mode development key is provisioned; plan toolchain selection early - CodeWarrior legacy projects must be rebuilt for CodeWarrior 5.x or migrated to S32 Design Studio.

USD $10,42 Em estoque

S912XEQ512BCAG

S912XEQ512BCAG - 16-bit 512KB Flash HCS12X MCU | NXP | 144-LQFP

The NXP S912XEQ512BCAG is a 16-bit HCS12X microcontroller with 512 KB of embedded Flash memory, a 50 MHz bus speed, and 119 general-purpose I/O lines, housed in a 144-pin LQFP (20x20 mm) package. It belongs to NXP's S12XE family and integrates an XGATE co-processor that offloads interrupt-driven processing, allowing the main S12X CPU to focus on application code while the XGATE handles virtual peripherals and high-bandwidth I/O. The device operates from a 3.3 V or 5 V supply, supporting both 1.8 V and 2.8 V internal regulation modes per the S12XE architecture, and is qualified to AEC-Q100 automotive standards for harsh-environment deployments. An HCS12X microcontroller is a 16-bit MCU that extends the classical HCS12 instruction set with a co-processor (XGATE) and richer peripheral integration. It sits within the broader automotive microcontroller taxonomy: microcontroller (MCU) -> 16-bit MCU -> HCS12X family -> S12XE sub-family -> power-train and body-control tier. XGATE accelerates interrupt service routines at up to 100 MHz equivalent throughput, enabling deterministic handling of CAN, SPI, and PWM traffic without burdening the application core. Key differentiating features of the S912XEQ512BCAG include the XGATE co-processor for virtual peripherals, hardware-emulated EEPROM (EEE) with configurable partition, a memory protection unit supporting supervisor/user modes, a 12-bit ADC with 3 microsecond conversion time, an enhanced capture timer (ECT), periodic interrupt timers (PIT), a real-time interrupt (RTI) module, a watchdog timer, low-voltage detect, and power-on reset. Connectivity peripherals include CAN, I2C, IrDA, SCI, and SPI, giving designers flexibility for body, chassis, and gateway applications. Architecturally the part uses the S12X RISC-like CPU core backed by the XGATE RISC co-processor, both sharing a unified memory map. This dual-core approach is particularly attractive for automotive network nodes where the XGATE can autonomously service CAN and LIN message buffers while the S12X runs the application stack, lowering overall interrupt latency and freeing CPU cycles for control algorithms. Typical applications include automotive body control modules, CAN/LIN gateway nodes, instrument clusters, HVAC controllers, seat and mirror controllers, and industrial CAN-based control units. Designers favor this device when 512 KB of Flash, AEC-Q100 qualification, and integrated CAN connectivity are required without the overhead of a 32-bit MCU. Designers should carefully allocate the EEE partition and Flash/EEPROM endurance budget early in the firmware cycle to maximize in-field reprogrammability. The 144-LQFP package provides generous PCB routing room for the 119 I/O lines but requires thermal management at sustained 50 MHz operation across -40C to +85C ambient conditions. This page synthesizes NXP datasheet specifications, distributor pricing, AEC-Q100 cross-reference, and pin-compatible drop-in alternatives across the S12XE family, providing engineering value not found on distributor catalog pages.

USD $10,50 Em estoque

S912XEQ512F0CAL

S912XEQ512F0CAL - 16-bit 50MHz 512KB Flash MCU | NXP Automotive

The NXP Semiconductors S912XEQ512F0CAL is a 16-bit HCS12X automotive microcontroller running at 50 MHz bus speed with 512 KB (512K x 8) on-chip Flash memory, housed in a 112-pin LQFP (20 x 20 mm) surface-mount package. It is automotive qualified to AEC-Q100 and rated for operation from -40C to +85C. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, ADCs, and communication interfaces on one die. Within the power-management and embedded control hierarchy, the HCS12X family belongs to the 16-bit microcontroller class positioned between 8-bit MCUs and 32-bit automotive processors, making it a widely used mid-range solution for real-time embedded control. Key features of the S912XEQ512F0CAL include the XGATE co-processor, which acts as a programmable DMA-driven RISC engine that offloads interrupt handling and I/O tasks from the main S12X CPU, effectively boosting overall system throughput. Additional features include flexible, programmable hardware-emulated EEPROM, a memory protection unit (MPU) with supervisor and user modes for system integrity, a 12-bit ADC with 3 us conversion time, an enhanced capture timer (ECT), a periodic interrupt timer (PIT), and a real-time interrupt (RTI). Technically, the device is based on the S12X CPU core operating from a 5V supply rail (with 1.8V/2.8V internal domains per distributor data), which gives it excellent EMC robustness and noise immunity compared with finer-geometry 3.3V or 1.8V-only processes. This is a significant advantage in the electrically harsh environments of vehicles and industrial machinery where high-voltage transients, load dump, and switching noise are common. Typical applications include body control modules, gateway modules, instrument clusters, HVAC controls, and general automotive/industrial real-time control systems. The large 512 KB Flash accommodates complex diagnostic stacks such as UDS, while the XGATE co-processor handles CAN and LIN communication stacks concurrently with the main application. A key design consideration is clock configuration: the 50 MHz bus speed is achieved with an internal PLL from an external crystal, so designers must carefully follow NXP layout and decoupling guidance for the PLL loop filter to meet EMC requirements. This page synthesizes distributor inventory and pricing data, drop-in same-family alternatives, design notes, and a detailed comparison table not found on the manufacturer product page alone.

USD $7,44 Em estoque

S912XEQ512F0MAG

S912XEQ512F0MAG - 16-bit MCU, 512KB Flash, 50MHz, AEC-Q100 | NXP

The NXP Semiconductors S912XEQ512F0MAG is a 16-bit automotive-qualified microcontroller built on the S12X CPU core, delivering 50 MHz bus speed with an integrated XGATE co-processor for offloading interrupt-driven peripherals. It integrates 512 KB of on-chip Flash and 32 KB of SRAM in a 144-pin LQFP (LFQFP) package with gull-wing leads, and is rated for the automotive -40C to +125C temperature grade. An automotive microcontroller (MCU) is a microcontroller unit specifically qualified for the harsh electrical and thermal environments of vehicle electronics. It belongs to the broader category of microcontrollers, which are single-chip computers integrating CPU, memory, and peripherals. The S12X family sits within NXP's S12 magniV family of mixed-signal automotive MCUs that combine digital control with on-chip analog, making them a subclass of embedded processors. Key features include 12-bit ADC with 3 us conversion time, an Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real-Time Interrupt (RTI), and flexible hardware-emulated EEPROM. A memory protection unit with supervisor/user modes adds system integrity for safety-critical code partitioning. The S12X core supports up to 50 MHz instruction execution, while the XGATE peripheral co-processor handles virtual peripheral routines in parallel with the main CPU, effectively boosting throughput for event-driven tasks such as CAN message handling or PWM updates. Architecturally, the S912XEQ512F0MAG combines the S12X 16-bit CPU (a superset of the classic S12 with enhanced addressing and DSP-like instructions) with an independent RISC-style XGATE running at twice the bus frequency. This dual-core approach lets the device service high-frequency interrupts without burdening application code. The 512 KB Flash is organized in a paged architecture supporting non-blocking in-application reprogramming, while the 32 KB RAM enables substantial data buffering for communication stacks. Typical applications include automotive body controllers, gateway modules, CAN/LIN network nodes, lighting controllers, HVAC actuators, and instrument clusters. The wide -40C to +125C operating range and AEC-Q100 qualification suit it for under-hood and chassis-mounted ECUs. Designers often pair it with NXP's CAN transceivers (such as TJA1042) and LIN transceivers (such as TJA1027) for in-vehicle networking. When designing with this part, allocate PCB area for the 144-pin LQFP footprint and ensure all analog supplies are decoupled with 100 nF ceramic capacitors close to the pins. Confirm the specific peripheral mix required by your application against the device's derivative datasheet before firmware development, as the S12XE family has multiple flash/RAM/peripheral variants. This page synthesizes distributor pricing, AEC-Q100 drop-in alternatives within the S12X family, and practical design notes not found in the manufacturer datasheet alone.

USD $10,85 Em estoque

S912XEQ512F0MAL

S912XEQ512F0MAL - 16-bit S12X MCU, 512KB Flash, 50MHz, AEC-Q100 | NXP

The NXP S912XEQ512F0MAL is a 16-bit HCS12X family microcontroller featuring an S12X core running at 50 MHz, 512 KB of Flash program memory, 32 KB of RAM, and 4 KB of EEPROM, packaged in a 112-pin LQFP (20x20 mm) with -40 °C to +125 °C automotive-grade temperature range. It targets automotive body, chassis, and gateway ECUs where deterministic 16-bit performance, hardware emulation of EEPROM, and CAN connectivity are required. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, and a configurable set of peripheral blocks on a single die. The S12X architecture is a 16-bit CISC core evolved from the original HC12, augmented by an XGATE co-processor that offloads interrupt-driven peripheral servicing, effectively doubling the throughput of the main CPU in I/O-heavy automotive nodes. S12XE family MCUs therefore sit in the hierarchy of microcontroller -> 16-bit MCU -> automotive-qualified MCU -> S12X family. Key features include a 12-bit ADC with 3 µs conversion time, an Enhanced Capture Timer (ECT) module, a Periodic Interrupt Timer (PIT), a Real-Time Interrupt (RTI), and an 8-channel PWM. The XGATE co-processor assists peripheral servicing and is programmable in C, enabling virtual peripheral design. Hardware-emulated EEPROM with flexible partitioning provides non-volatile storage without external memory. A Memory Protection Unit (MPU) supports supervisor/user modes for system integrity, and the peripheral set includes 3x CAN, 2x SPI, 2x SCI, 1x I2C, and an IrDA-compatible interface for in-cabin communication. The S912XEQ512F0MAL operates from 2.8 V to 5.5 V single supply, supports up to 91 I/O pins, and offers background debug mode (BDM) and JTAG for in-circuit development. On-chip voltage regulator and PLL provide system clock flexibility from a low-frequency crystal reference. The AEC-Q100 qualification, combined with the wide -40 °C to +125 °C operating range, makes the device directly suited to underhood and chassis environments. Typical applications include automotive body controllers, HVAC control modules, instrument clusters, gateway ECUs, and lighting controllers. The combination of 512 KB Flash, hardware EEPROM emulation, and three CAN channels is a typical signature for mid-range body and chassis networks on CAN-FD or CAN 2.0B buses. When designing with this MCU, allocate adequate decoupling (100 nF + 4.7 µF) close to the supply pins and follow NXP AN3275 reference layout for the 112-LQFP. Use CodeWarrior or S12 Studio with the BDM interface for development; background-debug and on-chip trace reduce the need for external emulator hardware. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $15,80 Em estoque

S912XEQ512F0MALR

S912XEQ512F0MALR - 16-bit 50MHz 512KB MCU | NXP

The NXP S912XEQ512F0MALR is a 16-bit automotive-qualified HCS12X microcontroller with an S12X core running at 50 MHz bus speed, 512KB (512K x 8) of on-chip flash memory, 32KB of RAM, housed in a 112-pin LQFP (20x20 mm) surface-mount package rated from -40C to +125C. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripheral interfaces on one die. The HCS12X/S12X family sits within the broader 16-bit MCU class, alongside architectures such as MSP430 and AVR, and serves as the complete control element in automotive and industrial embedded systems where flash density, EMC robustness, and mixed-signal integration matter more than raw 32-bit compute throughput. Key features of the S912XEQ512F0MALR include the XGATE co-processor, a second programmable RISC engine that offloads interrupt handling and I/O tasks to build virtual peripherals and boost overall system performance; a flexible, programmable hardware-emulated EEPROM block for parameter storage without external memory; and a memory protection unit (MPU) with supervisor/user modes for system integrity in safety-relevant designs. The device integrates a 12-bit ADC with 3 microsecond conversion time, an enhanced capture timer (ECT), a periodic interrupt timer (PIT), and a real-time interrupt (RTI). On the connectivity side, the MCU supports up to four CAN interfaces, making it well suited to in-vehicle networking, plus six SCI (UART) modules, three SPI modules, and I2C for peripheral expansion. The architecture operates across 1.8V, 2.8V, and 5V domains with the S12X CPU implemented in CMOS, delivering deterministic 16-bit real-time control with the EMC behavior expected of a body/chassis/powertrain-class automotive part. Typical applications include automotive body control modules, gateway nodes aggregating multiple CAN buses, HVAC and climate controllers, electric power steering assist logic, and industrial automation controllers that require flash density up to 512KB, four CAN channels, and -40C to +125C grade rating. When designing with this MCU, budget the ADC conversion time of 3 microseconds per channel into sampling schedules and place the hardware-emulated EEPROM wear-levelling driver so that emulated EEPROM cycles do not fragment the 512KB flash array. Ensure the 5V supply is decoupled per NXP reference designs and that the MPU region map is configured before enabling user-mode execution. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Em estoque

S912XEQ512F1MAA

S912XEQ512F1MAA - 16-bit 50MHz 512KB Flash MCU | NXP | Automotive

The NXP S912XEQ512F1MAA is a 16-bit HCS12X automotive microcontroller with an S12X core running at 50 MHz, 512KB of on-chip Flash, 32KB of RAM, and a 12-bit ADC, housed in an 80-pin QFP (14x14 mm) package. It is automotive qualified and rated for -40C to +125C operation. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals such as timers, communication interfaces, and analog-to-digital converters. Within the semiconductor hierarchy, the S912XEQ512F1MAA belongs to the 16-bit microcontroller class, the HCS12X (S12X) family, and the broader category of embedded processors used in automotive and industrial control systems. Key differentiating features include the XGATE co-processor, a separate RISC-style peripheral processor that offloads interrupt handling and I/O tasks from the main S12X CPU, effectively boosting system throughput without raising the core clock. The device also provides flexible, programmable hardware-emulated EEPROM, allowing data storage routines to be relocated and resized in Flash. A memory protection unit (MPU) with supervisor and user modes supports system integrity for safety-relevant designs. The S12X architecture keeps the classic HCS12 peripheral set - CAN, SCI, SPI, periodic interrupt timers, and pulse-width modulation modules - while raising the bus speed to 50 MHz. The 512KB Flash density with 32KB RAM gives headroom for complex control laws, diagnostics stacks, and OTA-style bootloaders in a single-chip solution. According to NXP product information, the part is automotive qualified, which aligns it with AEC-oriented design flows. Typical applications include body control modules, gateway nodes, HVAC and climate control, electric power steering assist logic, instrument clusters, and industrial control units where CAN networking and robust flash storage are required. The 80-QFP 14x14 mm package suits cost-sensitive, space-constrained PCBs with standard surface-mount assembly. When designing with this MCU, budget the single 5V supply and use the internal voltage regulator outputs as directed in the NXP reference manual; verify XGATE RAM partitioning early, since the co-processor and CPU share the 32KB RAM pool. This page synthesizes distributor pricing, drop-in alternatives within the S12X family, and practical design notes not found in the manufacturer datasheet.

USD $9,20 Em estoque

S912XEQ512F1VALR

S912XEQ512F1VALR - 16-Bit HCS12X MCU, 512KB Flash | NXP

The NXP S912XEQ512F1VALR is an automotive-qualified 16-bit HCS12X microcontroller with 512 KB of on-chip Flash, 32 KB RAM, and 4 KB EEPROM, running the S12X CPU core at up to 50 MHz bus speed, housed in a 112-pin LQFP (20x20 mm) package. The S12X architecture pairs the main CPU with an XGATE co-processor that offloads interrupt-driven peripheral servicing, allowing deterministic real-time peripheral handling without taxing the main core's bandwidth. What is an HCS12X microcontroller? The HCS12X family is NXP's evolution of the legacy HC12/HCS12 16-bit microcontroller line, designed for safety-critical automotive body, chassis, and powertrain applications. It belongs to the broader category of 16-bit microcontrollers (a subclass of microcontrollers, which themselves fall under embedded processors and semiconductors). Compared with 8-bit MCUs (8051, AVR, S08), 16-bit MCUs offer wider datapaths and more efficient arithmetic for CAN/LIN node stack processing and sensor-fusion math. Key features include hardware-emulated EEPROM capability for byte-level Flash write emulation, a 12-bit ADC with 3 microsecond conversion time, an Enhanced Capture Timer (ECT), a Periodic Interrupt Timer (PIT), a Real-Time Interrupt (RTI), and CAN 2.0A/B / LIN / SCI / SPI peripheral set. Operating voltage spans 1.72 V to 5.5 V supply rails (wide enough to be supplied directly from a 5 V automotive bus or 3.3 V logic rail). The flash access time is supported at the 50 MHz bus and the parts include a memory protection unit plus supervisor/user modes for system integrity support. Technical depth: The S12X core uses a 16-bit instruction set with enhanced addressing modes over the original S12, while the XGATE co-processor runs at 100 MHz (2x CPU rate) and executes RISC-style instructions from a shared SRAM. This dual-core design gives S12X parts a real-time headroom advantage over single-core HCS12 devices because high-frequency peripheral events can be handled by XGATE while the S12X CPU executes the application task. Typical applications include automotive body control modules (BCMs), HVAC control, instrument clusters, door/seat/window modules, and CAN/LIN gateway nodes. Industrial applications include sensor interfacing, motor control with PWM channels, and safety-critical PLC I/O modules where the wide 1.72 V to 5.5 V supply range and -40 °C to +105 °C temperature grade are particularly valuable. Design consideration: When designing with this device, allow adequate decoupling on each VDDR/VSS pair (typically 100 nF ceramic per pin) and ensure the EBI/CS signals route on an inner PCB layer to avoid disturbing sensitive analog ADC channels. The XGATE firmware image must be loaded into RAM at startup, which adds boot-time overhead that the project schedule should account for. This page synthesizes distributor pricing, pin-compatible LQFP-112 drop-in alternatives from the S12X family, and practical design notes not found in the manufacturer datasheet.

USD $18,45 Em estoque

S912XEQ512J2

S912XEQ512J2 - 16-bit 50MHz 512KB Flash MCU | NXP

The NXP Semiconductors S912XEQ512J2 is a 16-bit HCS12X automotive microcontroller built around the S12X core, running at up to 50 MHz with 512 KB of on-chip Flash memory, supplied in a 144-pin LQFP (20x20 mm) package. It is part of the automotive-qualified S12XE family. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals on one die, forming the complete embedded computing element of an electronic system. Within the hierarchy of embedded processors, 16-bit MCUs such as the S12XE family sit between 8-bit devices and 32-bit application processors, offering a well-understood single-chip architecture that remains popular in automotive body electronics, gateway modules, and industrial control. Key features of the S912XEQ512J2 include the enhanced S12X core with an XGATE co-processor concept in the HCS12X architecture for offloading interrupt handling, 512 KB of Flash program memory, 50 MHz bus operation, and automotive qualification per NXP's S12XE product data. Ordering suffixes define temperature grade and packaging: for example, S912XEQ512J2CAG is rated -40 to +85 C in QFP-144, while S912XEQ512J2MAL extends to -40 to +125 C in QFP-112. Technically, the HCS12X generation evolved from the Freescale (now NXP) HCS12 architecture, adding a more efficient instruction pipeline and peripheral set while preserving ease of single-supply 5V operation and on-chip flash programming that made the S12 family an industry workhorse for in-vehicle modules. Typical applications include automotive body control modules, door and seat control units, in-vehicle networking gateways handling CAN/LIN communication, and industrial control systems where a rugged 16-bit MCU with large embedded Flash is preferred. Design consideration: always match the full ordering-part suffix (temperature range, package, packing) to your environment; the 144-pin J2 variant and 112-pin M variant are not footprint interchangeable. This page synthesizes distributor pricing from Octopart, LCSC, DigiKey and JLCPCB, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $6,85 Em estoque

S912XEQ512J2CAL

S912XEQ512J2CAL - 16-bit 50MHz 512KB MCU | NXP | Automotive

The NXP S912XEQ512J2CAL is a 16-bit HCS12X automotive-qualified microcontroller with an S12X CPU core running at 50 MHz, 512 KB (512K x 8) on-chip Flash, and a 112-pin LQFP (20x20 mm) surface-mount package. Per the NXP product page, the part is rated for -40/+85 degC operation and carries automotive qualification. A microcontroller (MCU) is a single-chip embedded computer that integrates a processor core, non-volatile program memory, SRAM, peripheral controllers, and analog blocks on one die. The HCS12X family sits within the broader 16-bit MCU hierarchy and was widely deployed in body, chassis, and powertrain electronic control units (ECUs) where deterministic real-time behavior matters more than raw processing throughput. Key features of the S912XEQ512J2CAL include the XGATE co-processor, which offloads interrupt-driven I/O handling from the main S12X CPU and enables virtual peripherals with measurably higher overall system throughput. The memory system provides flexible, programmable, hardware-emulated EEPROM for calibration and diagnostic data storage. A memory protection unit with supervisor/user modes adds system integrity support required in safety-relevant designs. Technical depth: the on-chip ADC delivers 12-bit resolution with a 3 us conversion time, suitable for multiplexed sensor acquisition in automotive ECUs. Peripherals include the Enhanced Capture Timer (ECT) for engine position and PWM tasks, the Periodic Interrupt Timer (PIT), and a Real Time Interrupt (RTI) for time-base generation. The 50 MHz bus speed keeps interrupt latency deterministic for closed-loop control. Typical applications include automotive body control modules, instrument clusters, gateways, HVAC controllers, and industrial control systems requiring 12-bit analog acquisition and EEPROM emulation. Design consideration: because NXP marks this device as No Longer Manufactured, new designs should plan for last-time-buy stock or a migration path to an available S12X family variant in the same 112-LQFP footprint. This page synthesizes distributor pricing, drop-in same-family alternatives, and obsolescence guidance not found in the manufacturer datasheet, helping engineers source or replace this hard-to-find 16-bit MCU.

USD $10,80 Em estoque

S912XEQ512J2MAA

S912XEQ512J2MAA - 16-bit 50MHz 512KB MCU | NXP | Automotive (Tape & Reel)

The NXP Semiconductors S912XEQ512J2MAA is a 16-bit HCS12X automotive microcontroller with a 50 MHz S12X core, 512KB (512K x 8) Flash memory, and an 80-pin QFP (14x14 mm) package, qualified to AEC-Q100 for -40C to +125C operation. A 16-bit microcontroller (MCU) is a single-chip computer whose ALU and registers process data 16 bits at a time. Within the embedded hierarchy, the MCU sits below 32-bit application processors and above 8-bit controllers, making 16-bit parts ideal for real-time control tasks such as body electronics, motor control, and instrumentation where deterministic interrupt latency matters more than raw throughput. Key features of the S912XEQ512J2MAA include the enhanced S12X core with an XGATE co-processor concept for offloading interrupt handling, 512KB of on-chip Flash program memory, and 50 MHz bus-domain performance. Supply operation spans 1.8V/2.8V/5V domains per Arrow product data, supporting mixed-voltage automotive designs. The device is shipped in Tape & Reel (T/R) packing for automated assembly. Technically, the HCS12X architecture is an evolution of Freescale (now NXP) proven HC12 family, adding an orthogonal instruction set, enhanced timing and communication peripherals, and automotive-grade process qualification. Flash endurance and retention are specified in the manufacturer datasheet for lifetime in-vehicle reprogramming scenarios. Typical applications include automotive body control modules, gateway nodes, HVAC blowers, seat and mirror control, instrument clusters, and industrial controllers requiring CAN/LIN connectivity with high Flash density. The 80-QFP 14x14 footprint suits cost-sensitive 2-layer and 4-layer boards. Design consideration: budget the 50 MHz core against Flash wait states and verify the J2 temperature ordering (-40/+125C) against your under-hood placement; PCB land pattern must match the 0.5 mm-pitch 80-QFP footprint per the datasheet mechanical drawing. This page synthesizes distributor pricing tiers, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $8,60 Em estoque

S912XEQ512J2MAAR

S912XEQ512J2MAAR - 16-bit 50MHz 512KB MCU | NXP | Automotive

The NXP Semiconductors S912XEQ512J2MAAR is a 16-bit HCS12X automotive microcontroller with a 50 MHz S12X core, 512KB (512K x 8) Flash memory, and an 80-pin QFP (14x14 mm) package, qualified to AEC-Q100 for -40C to +125C operation. A 16-bit microcontroller (MCU) is a single-chip computer whose ALU and registers process data 16 bits at a time. Within the embedded hierarchy, the MCU sits below 32-bit application processors and above 8-bit controllers, making 16-bit parts ideal for real-time control tasks such as body electronics, motor control, and instrumentation where deterministic interrupt latency matters more than raw throughput. Key features of the S912XEQ512J2MAAR include the enhanced S12X core with an XGATE co-processor concept for offloading interrupt handling, 512KB of on-chip Flash program memory, and 50 MHz bus-domain performance. Supply operation spans 1.8V/2.8V/5V domains per Arrow product data, supporting mixed-voltage automotive designs. The device is shipped in Tape & Reel (T/R) packing for automated assembly. Technically, the HCS12X architecture is an evolution of Freescale (now NXP) proven HC12 family, adding an orthogonal instruction set, enhanced timing and communication peripherals, and automotive-grade process qualification. Flash endurance and retention are specified in the manufacturer datasheet for lifetime in-vehicle reprogramming scenarios. Typical applications include automotive body control modules, gateway nodes, HVAC blowers, seat and mirror control, instrument clusters, and industrial controllers requiring CAN/LIN connectivity with high Flash density. The 80-QFP 14x14 footprint suits cost-sensitive 2-layer and 4-layer boards. Design consideration: budget the 50 MHz core against Flash wait states and verify the J2 temperature ordering (-40/+125C) against your under-hood placement; PCB land pattern must match the 0.5 mm-pitch 80-QFP footprint per the datasheet mechanical drawing. This page synthesizes distributor pricing tiers, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $8,60 Em estoque

S912XEQ512J2MAG

S912XEQ512J2MAG - 16-bit S12X MCU 512KB 50MHz QFP-144 | NXP

The NXP (Freescale) S912XEQ512J2MAG is a 16-bit automotive microcontroller based on the S12X core, operating at 50 MHz bus speed, with 512 KB of on-chip Flash memory, housed in a 144-terminal QFP (square, gull-wing) package qualified for -40 to +125 C automotive operation. An MCU (microcontroller unit) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals, sitting at the heart of embedded control systems. Within the powertrain and body-electronics hierarchy, the S12X family belongs to NXP's HCS12X line of 16-bit automotive MCUs, bridging the gap between simple 8-bit parts and 32-bit automotive processors. Key features of the S912XEQ512J2MAG include the XGATE co-processor, which offloads interrupt handling and communication tasks to build virtual peripherals and boost overall system throughput. A flexible, programmable, hardware-emulated EEPROM enables parameter storage without external memory. System integrity is supported by a memory protection unit (MPU) with supervisor and user operating modes, important for safety-relevant automotive software architectures. On the analog side, the integrated ADC provides 12-bit resolution with a 3 us conversion time, complemented by an on-chip temperature sensor. Timing peripherals include the Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), and Real Time Interrupt (RTI), while serial connectivity is provided through SCI interfaces. These peripherals reduce external component count in body control modules, gateway nodes, and chassis systems. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, door modules, seat control, and industrial control equipment where an automotive-qualified 16-bit MCU with large Flash is required. A key design consideration is that the QFP-144 gull-wing package requires careful PCB land-pattern design and solder-reflow profiling; verify the exact speed grade and supply voltage against the manufacturer datasheet before finalizing the power architecture. This page synthesizes distributor availability data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet. Pricing shown is as of 2026-10-18.

Cotação Em estoque

S912XEQ512J2MAL

S912XEQ512J2MAL - 16-bit S12XE MCU, 512KB Flash, 50MHz | NXP

The NXP Semiconductors S912XEQ512J2MAL is a 16-bit HCS12X-family microcontroller built around the S12XE CPU core with an integrated XGATE co-processor, 512 KB of program Flash, and a 50 MHz bus speed, supplied in a 112-pin LQFP package. It supports multi-voltage operation from 1.8 V to 5 V and is qualified to the AEC-Q100 automotive temperature range of -40 °C to +125 °C. Key differentiating specifications include the XGATE auxiliary RISC engine (used to offload interrupt-driven I/O from the main core), a 12-bit ADC with 3 µs conversion time, an Enhanced Capture Timer (ECT), a Periodic Interrupt Timer (PIT), and a programmable hardware-emulated EEPROM. On-chip peripherals also include a Real-Time Interrupt (RTI), a memory protection unit with supervisor/user modes for system integrity, and a CAN/SPI/SCI communications subsystem typical of the S12X family. The S12XE architecture combines a CISC-style main CPU with an XGATE DMA-style co-processor, allowing virtual peripherals and deterministic interrupt handling - a pattern that boosted throughput in the early-2000s automotive ECU market and remains useful in legacy LIN/CAN body controllers. The hardware memory protection unit (MPU) and the supervisor/user modes are implemented to support automotive software separation and ASIL decomposition. The 512 KB Flash with hardware-emulated EEPROM lets designers write non-volatile parameter storage without external EEPROM chips. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, lighting/ECM, industrial CAN nodes, and any 5 V-tolerant automotive-grade MCU design that still requires the S12X peripheral set. The wide voltage range (1.8 V/2.8 V/5 V) and the QFP-112 footprint make it suitable for both new designs and field-replacement of older S12/S12XE designs. When designing with this part, confirm availability through NXP or authorized distributors because the part is listed as No Longer Manufactured by NXP; Rochester Electronics and other distributors may still hold inventory. For new designs, evaluate NXP's current S32K family as a forward-compatible migration path. This page synthesizes current distributor stock, same-family drop-in alternatives, automotive-grade design notes, and comparison data not found in the manufacturer datasheet alone.

USD $17,95 Em estoque

S912XEQ512J2MALR

S912XEQ512J2MALR - 16-bit S12X MCU 512KB Flash LQFP-112 | NXP

The NXP Semiconductors S912XEQ512J2MALR is a 16-bit HCS12X microcontroller with a 512 KB Flash program memory, a 50 MHz S12X core, and a 4 KB hardware-emulated EEPROM region operating from a 1.8 V supply voltage in a 112-pin LQFP (LQFP-112) gull-wing surface-mount package. It is qualified for automotive ambient environments across the -40 C to +125 C temperature span and is built on NXP's S12X architecture with the XGATE co-processor for peripheral offload. What is an HCS12X microcontroller? An HCS12X MCU is a 16-bit automotive microcontroller in the broader family of microcontrollers -> embedded controllers -> semiconductor ICs. The S12X core extends the legacy HCS12 pipeline with the XGATE peripheral co-processor, enabling virtual peripherals that free the main CPU from routine interrupt handling. This places HCS12X parts in the same engineering category as the broader family of RISC and CISC automotive microcontrollers from NXP, STMicroelectronics, and Renesas, where reliability and tool maturity dominate the selection criteria. Key features include the XGATE co-processor for offloaded peripheral handling, 32 KB on-chip RAM to pair with the 512 KB Flash, a 12-bit analog-to-digital converter (ADC) with approximately 3 microsecond conversion time, an Enhanced Capture Timer (ECT) module, a Periodic Interrupt Timer (PIT), and a Real-Time Interrupt (RTI) block for deterministic scheduling. The integrated memory protection unit supports supervisor/user privilege separation, and the programmable hardware-emulated EEPROM region delivers application-configurable non-volatile storage without an external EEPROM chip. At the architectural level the part combines a deterministic CISC 16-bit core with the XGATE RISC co-processor. The S12X pipeline can dispatch XGATE tasks to service peripherals at zero-jitter while the main CPU executes the application. The bus runs up to 50 MHz and the analog chain settles in roughly 3 microseconds per conversion, which is sufficient for slow-loop actuator feedback and general-purpose sensor reading in body and chassis ECUs. Typical applications include automotive body controllers, instrument clusters, lighting modules, HVAC control panels, and CAN/LIN gateway nodes, as well as industrial automation PLCs and smart sensor hubs where the part's AEC-Q100 qualification and 1.8 V operation are beneficial. When designing with this part, reserve a 4.7 nF to 100 nF decoupling cap per VDD/VSS pair and follow NXP's reference BDM (background debug mode) layout for programming. The hardware-emulated EEPROM region requires periodic wear-leveling handling in firmware. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $14,50 Em estoque

S912XEQ512J3CAGR

S912XEQ512J3CAGR - 16-bit 50MHz 512KB Flash MCU | NXP

The NXP S912XEQ512J3CAGR is a 16-bit HCS12X family microcontroller (MCU) operating at 50 MHz with 512 KB of Flash program memory, 32 KB of RAM, and 4 KB of EEPROM, housed in a 144-pin LQFP (20 mm x 20 mm) package. The device integrates the HCS12X CPU core with enhanced XGATE co-processor architecture, delivering automotive-grade connectivity and control peripherals for body, chassis, and powertrain applications. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU, memory (Flash, RAM, EEPROM), and programmable I/O peripherals on a single die. Within the semiconductor hierarchy, MCUs sit below microprocessors (MPUs) and above simple logic ICs; they are the central processing element of nearly every embedded system. The HCS12X family extends the legacy HC12 architecture with a 16-bit RISC-like instruction set, foreground/background task switching, and a 32-bit address extension, giving the S912XEQ512J3CAGR near-32-bit performance while retaining 16-bit code density. This makes the part well suited to mid-complexity automotive controllers where deterministic interrupt response and CAN/LIN connectivity are mandatory. Key features of the S912XEQ512J3CAGR include: 50 MHz core frequency, 512 KB Flash, 32 KB RAM, 4 KB EEPROM, four CAN 2.0A/B channels, two SCI (UART) ports, one SPI and one I2C bus, an 8-channel 10-bit ADC, multiple PWM channels, and an Enhanced Capture Timer. The integrated XGATE co-processor offloads interrupt-driven I/O servicing at rates up to 100 MHz, freeing the main CPU for control-loop computation. Typical applications of the S912XEQ512J3CAGR include automotive body controllers, CAN/LIN gateway nodes, instrument clusters, HVAC control modules, and industrial PLC I/O expanders. Designers choose this part when their firmware is already on the S12X toolchain (CodeWarrior, Cosmic, IAR) or when they need a long-lifecycle automotive-grade MCU with full automotive certification and CAN connectivity without migrating to a 32-bit platform.

USD $17,80 Em estoque

S912XEQ512J3MAA

S912XEQ512J3MAA - 16-bit S12X MCU 512KB Flash 50MHz QFP-80 | NXP

The NXP S912XEQ512J3MAA is a 16-bit HCS12X microcontroller with a 512KB Flash program memory, 50MHz CPU core speed, an XGATE co-processor, and a memory protection unit, housed in an 80-pin QFP (14x14 mm) package qualified to the -40C/+125C automotive temperature grade. This part belongs to the HCS12X family of microcontrollers, a category of 16-bit automotive-grade MCUs that sits within the broader 16-bit MCU class, which itself bridges 8-bit microcontrollers and 32-bit ARM Cortex-M parts. The S12X core retains the S12 instruction set for legacy code reuse while adding an XGATE peripheral coprocessor that offloads interrupt-driven tasks to boost sustained bandwidth. An on-chip hardware memory protection unit enables supervisor/user separation for software isolation in safety-relevant systems. Key features include 512KB of on-chip Flash with 4KB EEPROM emulation, 32KB SRAM, two 12-bit ADCs with 3us conversion time, an Enhanced Capture Timer (ECT), a Periodic Interrupt Timer (PIT), a Real-Time Interrupt (RTI), CAN, SCI, SPI, I2C, and an 8-channel PWM. The wide automotive-grade supply range (typically 1.8V core / 2.8V/5V I/O) lets designers integrate the MCU directly into 12V battery-fed ECUs without intermediate regulators. Architecturally, the dual-execution unit design (S12X CPU + XGATE coprocessor) reaches aggregate throughput beyond what a single-issue 16-bit core achieves, making the device well-matched to multiplexed automotive networks and LIN/CAN stacks. The hardware emulation of EEPROM in Flash avoids external NVM and reduces BOM cost for body and chassis applications. Typical applications include body control modules (BCM), instrument clusters, HVAC controls, and powertrain peripherals where automotive-grade qualification and CAN connectivity are mandatory. Its 512KB Flash gives room for AUTOSAR stacks and diagnostics (UDS/KWP2000) over CAN. Design consideration: place a 100nF decoupling capacitor within 5mm of each VDD/VSS pair and provide a low-impedance ground pour beneath the QFP-80 to dissipate heat and to maintain ADC reference integrity under high-current transients. This page synthesizes NXP datasheet specifications, distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, optimized for engineer-paced sourcing and design-in.

USD $13,21 Em estoque

S912XEQ512J3MAG

S912XEQ512J3MAG - 16-bit 50MHz 512KB MCU | NXP Automotive

The NXP Semiconductors S912XEQ512J3MAG is a 16-bit HCS12X (S12X) automotive microcontroller with 512KB Flash, 50MHz bus speed, and 12-bit ADC, housed in a 144-pin LQFP (20x20 mm) package. A microcontroller unit (MCU) integrates a processor core, memory, and peripherals on a single chip, sitting at the center of the embedded control hierarchy: microcontroller -> embedded processor -> system-on-chip -> semiconductor. The S12X family extends Freescale's (now NXP) HCS12 architecture with an enhanced instruction set, making it a mainstay of body, chassis, and powertrain electronic control units (ECUs). Key features include the XGATE co-processor, a RISC engine that offloads interrupt handling and I/O processing to build virtual peripherals and boost overall system throughput; a flexible, programmable hardware-emulated EEPROM for data logging without external memory; and a memory protection unit with supervisor/user modes for system integrity. The 12-bit ADC delivers 3 microsecond conversion time, while enhanced capture timer (ECT), periodic interrupt timer (PIT), and real-time interrupt (RTI) blocks round out the timing peripherals. Technically, the S12X core executes at 50MHz bus speed with a CISC-style instruction set backward compatible with the S12/HCS12 generation, simplifying migration of legacy 16-bit code. The device operates from a 5V supply (with 1.8V/2.8V internal rails noted for family variants) and is automotive qualified for -40C to +125C ambient operation. Typical applications include automotive body control modules, gateway ECUs, dashboard/cluster controllers, and industrial embedded systems requiring a rugged 16-bit control platform with rich I/O. For design, exploit the XGATE co-processor to move time-critical I/O tasks off the main CPU, and verify EEPROM emulation sizing against your logging interval to manage Flash endurance. This page synthesizes distributor pricing, drop-in alternatives within the S12X family, and practical design notes not found in the manufacturer datasheet.

USD $14,80 Em estoque

S912XEQ512J3MALR

S912XEQ512J3MALR - 16-bit S12X MCU, 512KB Flash, 50MHz | NXP

The NXP S912XEQ512J3MALR is a 16-bit microcontroller from the S12X family featuring an S12X core, 512 KB of Flash memory, and a 50 MHz bus speed, all integrated into a 112-pin LQFP package measuring 20x20 mm. It is qualified for automotive applications with an operating temperature range of -40 °C to +125 °C. An MCU (microcontroller unit) is a single-chip computer that combines a CPU core, on-chip memory, and a rich set of peripherals — ADCs, timers, communication interfaces — into one package. A 16-bit MCU like the S12X occupies the middle ground between 8-bit microcontrollers (used for simple control loops) and 32-bit Cortex-M devices (used for heavy DSP or graphical workloads), making it well suited to body electronics, gateway modules, and powertrain peripherals. The S12X architecture extends the classic HCS12 with an XGATE co-processor that accelerates I/O handling by offloading interrupt-driven tasks from the main CPU. Key on-chip resources include 512 KB of Flash, an integrated XGATE co-processor, a 12-bit ADC with 3 µs conversion time, an Enhanced Capture Timer (ECT), a Periodic Interrupt Timer (PIT), a Real-Time Interrupt (RTI), a memory protection unit (MPU) supporting supervisor/user modes, and hardware-emulated EEPROM using unused Flash sectors. Together, these peripherals support deterministic real-time control with low software overhead. The S12X core runs the CPU at a 50 MHz bus rate and uses a 16-bit data path with coherent interrupt and memory addressing. The XGATE peripheral accelerator enables virtual peripheral designs where interrupt response can be reduced below 1 µs, improving loop time on motor-control and LIN/CAN gateway nodes. Automotive-grade qualification means the die is characterized for -40 °C to +125 °C and has been validated against the AEC-Q100 reliability regime. Typical applications include automotive body controllers, CAN/LIN gateway nodes, HVAC controls, instrument cluster peripherals, and industrial PLC I/O modules. It is also a common choice for retrofitting legacy HCS12 designs where more code space is needed without moving to a 32-bit platform. When designing with this device, ensure the 5 V supply rail stays within tolerance during cranking transients and that the ECT/PIT interrupt priorities match the XGATE channel assignments. Hardware-emulated EEPROM must be placed in dedicated Flash sectors that are protected from code overwrites. This page consolidates distributor stock, validated cross-reference data, automotive-grade qualification notes, and PCB-level design guidance specific to the S912XEQ512J3MALR — context that goes beyond the manufacturer datasheet and helps procurement and hardware engineers choose the right variant of the S12X family.

USD $10,92 Em estoque

S912XEQ512J3VAG

S912XEQ512J3VAG - 16-Bit 50MHz S12X MCU, 512KB Flash | NXP

The NXP S912XEQ512J3VAG is a 16-bit HCS12X microcontroller (MCU) running at up to 50 MHz core frequency, integrating 512 KB of on-chip Flash and an XGATE co-processor, housed in a 144-pin LQFP (20x20 mm) package. The device operates from a wide 1.8 V / 2.8 V / 5 V supply rail set and is qualified to the AEC-Q100 automotive standard, targeting harsh-environment body and chassis applications. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of programmable peripherals into one device. The HCS12X family is NXP's enhanced 16-bit CISC core architecture used in automotive body electronics, combining deterministic interrupt handling with the XGATE peripheral co-processor that offloads interrupt-driven tasks and emulates additional virtual peripherals. Within the broader taxonomy, this part sits as: HCS12X CPU -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features include 512 KB Flash, 32 KB SRAM, 4 KB EEPROM, an XGATE co-processor for offloading interrupt service routines, a memory protection unit with supervisor/user modes, and a flexible peripheral set including CAN, SCI/SPI, PWM, timers, and an 8/10/12-bit ADC. The 50 MHz CPU provides up to 50 MIPS throughput for real-time control loops, while wide supply flexibility allows direct connection to 3.3 V or 5 V automotive buses. Typical applications include automotive body controllers, gateway modules, instrument clusters, HVAC control modules, and industrial PLC nodes where deterministic 16-bit performance and automotive qualification matter. A 144-pin LQFP footprint gives generous I/O access for multi-CAN and LIN networks plus analog sensor inputs. Use external NPN/PNP drivers when controlling LEDs, solenoids, or relays since the I/O pins source/sink only modest current. Verify QSPI timing with the bus clock and place bulk decoupling capacitors within 5 mm of the power pins to ride out cranking transients on the 12 V supply.

USD $10,75 Em estoque

S912XES384J2CAL

S912XES384J2CAL - 16-Bit Auto MCU 384KB 112-LQFP | NXP

The NXP S912XES384J2CAL is a 16-bit automotive microcontroller from the HCS12X family, featuring an enhanced S12X CPU core running at 50 MHz with 384 KB on-chip flash, 16 KB RAM, and a 112-pin LQFP package. The part operates from 3.3 V/5 V supplies and is qualified for AEC-Q100 Grade 1 automotive ambient temperatures from -40 C to +85 C. What is an automotive 16-bit microcontroller? An automotive 16-bit microcontroller (MCU) is a programmable embedded processor optimized for in-vehicle electronic control units (ECUs) that require deterministic real-time control, on-chip non-volatile memory for firmware, and AEC-Q100 qualification for harsh under-hood and cabin environments. The HCS12X family extends the classic HC12 architecture by adding a Programmable Logical Address Mapping (XGATE) co-processor that offloads interrupt-driven I/O from the main CPU, improving throughput for body, chassis, and powertrain applications. Key features include an XGATE auxiliary core for parallel I/O handling, 4 KB EEPROM for non-volatile data, an Enhanced Capture Timer (ECT) module, multiple CAN (msCAN) controllers for in-vehicle networking, SCI/SPI/I2C peripherals for external sensor and actuator interfacing, and a 10-bit analog-to-digital converter (ATD) for analog signal acquisition. The 112-pin LQFP package exposes 8 channels of enhanced capture and 16-bit timer counter modules for motor and solenoid control. S12X devices execute the standard HC12 instruction set while adding new instructions, larger 24-bit addressing via the GLOBAL paging window, and 4 byte-aligned indexable page registers. This enables flat access to up to 8 MB of code space for advanced body controller and gateway firmware, while preserving compatibility with legacy HCS12 code bases used across the automotive industry. Typical applications include automotive body controllers, instrument clusters, HVAC controls, lighting modules, seat and door zone ECUs, low-end gateway nodes, CAN node controllers, and powertrain peripherals requiring reliable ambient-temperature operation and comprehensive on-chip peripherals. When designing with S912XES384J2CAL, allocate adequate PCB copper for thermal dissipation across the 112-pin LQFP ground ring; the device consumes approximately 150 mW at 50 MHz in active RUN mode and significantly less in pseudo-stop and wait modes. Use BDM (Background Debug Mode) for non-intrusive in-circuit firmware development and production programming. This page synthesizes distributor pricing, same-family S12X drop-in alternatives, AEC-Q100 qualification notes, and practical BDM-based design guidance not consolidated in any single manufacturer document.

USD $5,15 Em estoque

S912XES384J3VAG

S912XES384J3VAG - 16-Bit HCS12X MCU 384KB Flash | NXP | 144-LQFP

The NXP (formerly Freescale) S912XES384J3VAG is a 16-bit HCS12X microcontroller featuring a 50 MHz CPU core, 384 KB of on-chip Flash memory, and is housed in a 144-pin LQFP (20x20 mm) package. It is qualified for the industrial temperature grade of -40 C to +105 C and is in the ACTIVE lifecycle stage. An HCS12X microcontroller is a member of the HCS12 family of 16-bit microcontrollers originally developed by Freescale (now part of NXP Semiconductors). The "X" variant adds an enhanced XGATE coprocessor that accelerates I/O and peripheral handling, offloading interrupt-driven tasks from the main CPU. Within the broader taxonomy, HCS12X MCUs sit between 8-bit HC08/MC9S08 parts and 32-bit Power Architecture / Kinetis devices, targeting cost-sensitive real-time control applications where 16-bit math and deterministic interrupt response are required. Key features of this device include 384 KB (384K x 8) of Flash program memory, a 50 MHz HCS12X CPU, the XGATE coprocessor, multiple serial communication interfaces (SCI, SPI, I2C), a CAN module, and a 12-bit analog-to-digital converter. The 144-pin LQFP package exposes a large number of general-purpose I/O pins suitable for body, chassis, and industrial controllers that need many simultaneous peripheral connections. Typical applications include automotive body controllers, instrument clusters, HVAC modules, industrial PLCs, motor control boards, and sensor aggregation nodes. The wide -40 C to +105 C industrial temperature range also makes the part suitable for non-automotive harsh environments. When designing with this part, confirm that the available S912X development toolchain (CodeWarrior for HCS12X or third-party IDEs) is compatible with the user's host environment, and verify that the 144-LQFP land pattern is consistent with the assembly line's soldering capability. Note that the part is currently distributed primarily through authorized and stocking distributors such as Rochester Electronics. This page synthesizes distributor pricing, S912X-family drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet, helping engineers evaluate second-source options and board-level integration risk.

USD $10,65 Em estoque

S912XES384J3VAL

S912XES384J3VAL - 16-Bit HCS12X MCU 384KB Flash 112-LQFP | NXP

The NXP S912XES384J3VAL is a 16-bit HCS12X family microcontroller with 384KB of on-chip Flash memory, 50 MHz CPU core, and 112-pin LQFP (20x20 mm) surface-mount package. According to the verified distributor listings, the device ships in the industrial operating temperature grade, ships with GULL WING terminal form, and is sold as a QFP / square package, with the original manufacturer Freescale Semiconductor (later absorbed into NXP). The 'J3' mask/revision designator and 'V' package letter indicate the 112-LQFP industrial-temperature option. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a rich set of on-chip peripherals such as timers, ADC, communication controllers (SCI/SPI/I2C/CAN), and general-purpose I/O. Within the broader semiconductor taxonomy, MCUs sit inside the embedded-IC family, between microprocessors (MPU) and application-specific standard products (ASSP). HCS12X is NXP's enhanced 16-bit MCU architecture, an evolution of the original HC12 line that adds an XGATE co-processor for offloading interrupt-driven I/O from the main CPU, dramatically improving real-time performance for automotive body, chassis, and industrial control applications. Programmable Flash sizes in this family range from 128KB to 1MB, putting the '384J3' variant in the mid-density range suitable for protocol stacks, motor-control firmware, and gateway nodes. Key features per verified distributor data include the 16-bit HCS12X CPU at 50 MHz, 384KB (384K x 8) of program Flash, 112-LQFP (20x20 mm) gull-wing package, industrial temperature grade, and a member of the S912X sub-family which is the standard (non-LCD) variant of the S12XE/S12XS series. The XGATE peripheral co-processor provides DMA-style I/O handling at up to 100 MHz, freeing the main S12X core for application logic. On-chip peripherals commonly paired with this mask set include CAN 2.0 controllers, SCI/UART, SPI, I2C, an 8/10/12-bit ADC, PWM modules, and general-purpose timers suitable for BLDC and stepper motor drive. Typical applications include automotive body-electronics modules (BCM), industrial CAN gateways, HVAC controllers, and sensor-interface nodes where deterministic real-time response to interrupts is mandatory. The S912XE384J3VAL is also well suited to small-format motor-control PCBs because the 112-LQFP package gives 80+ general-purpose I/O lines for parallel keypad scanning, LED drivers, and segmented-display control without an external bus expander. When designing with this part, confirm the supply voltage (5V typical for HCS12X), regulator sequencing, and the BDM (Background Debug Mode) interface for in-circuit programming. The XGATE co-processor firmware must be developed with Freescale/NXP CodeWarrior or the modern S32DS toolchain to access the full peripheral bandwidth. RoHS-compliant and lead-free versions are standard; for automotive AEC-Q100 qualification, choose a sibling 'J3V' or 'MAA' suffix variant.

USD $14,85 Em estoque

Subcategorias

Produtos (32725)