Microcontroladores

Produtos (18756)

DSPIC33EP512GM710-I/PF - 70 MIPS DSC, 512KB Flash, TQFP-100 | Microchip
DSPIC33EP512GM710-I/PF

DSPIC33EP512GM710-I/PF - 70 MIPS DSC, 512KB Flash, TQFP-100 | Microchip

The Microchip Technology DSPIC33EP512GM710-I/PF is a 16-bit digital signal controller (DSC) from the dsPIC33EP GM family, delivering 70 MIPS performance from a dsPIC33E core, integrating 512 KB of flash program memory and 53 KB of RAM, and packaged in a 100-pin TQFP (14x14 mm, 0.5 mm pitch) footprint with industrial temperature rating of -40C to +85C. A digital signal controller combines the deterministic interrupt handling and peripheral set of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the power-management hierarchy, DSCs occupy the niche between general-purpose MCUs and standalone DSPs, making them the default choice for closed-loop control systems such as digital power conversion, motor control, and sensor signal processing. The dsPIC33E core executes an optimized C compiler-friendly instruction set with single-cycle MAC operations. Key differentiating features of the GM710 include a DSP engine with 17-bit x 17-bit single-cycle MAC, dual 40-bit accumulators, and rounded saturation modes that prevent overflow artifacts in control loops. The device integrates 12-bit ADC channels operating up to approximately 1.1 Msps, motor-control PWM with dedicated fault inputs, input capture/output compare, quadrature encoder interface (QEI), CAN 2.0B, multiple UART/SPI/I2C ports, and on-chip operational amplifiers - analog blocks that directly support sensorless motor control and power-supply feedback loops without external amplifiers. Architecturally, the device operates from a 3.0V to 3.6V single supply, includes flash self-programming, code protection, and a peripheral set reducing external component count. The on-chip op amps buffer shunt-resistor feedback for field-oriented control (FOC) of PMSM and BLDC motors, while the QEI module interfaces directly to incremental encoders for sensored servo drives. The General Purpose Plug-In Module documentation (Microchip document 50002216a) explicitly targets single/dual motor control using this device on the Explorer 16 platform. Typical applications include single and dual motor drives, solar inverters, digital LED drivers, UPS systems, automotive body electronics, and industrial automation nodes. The wide operating voltage range and rich peripheral integration make it equally suitable for sensorless BLDC ceiling fans, servo drives, and power-factor-corrected SMPS control loops. Design consideration: allocate VDD/VSS decoupling per datasheet recommendations on the 100-pin TQFP, and route analog op-amp inputs away from PWM switching edges to preserve ADC accuracy. The PIM (Plug-In Module) configuration for the Explorer 16 board (MA330035) provides a ready-to-use evaluation platform. This page synthesizes distributor pricing tiers, drop-in alternatives, pin-count details, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GM710-I/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip
DSPIC33EP512GM710-I/PT

DSPIC33EP512GM710-I/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM710-I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33E family delivering 70 MIPS throughput, 512 KB flash program memory, and 48 KB RAM in a 100-pin TQFP (12x12 mm) package. It integrates a dsPIC DSC core with hardware DSP instructions, 12 motor-control PWM channels with 1 ns resolution, four on-chip operational amplifiers, and dual CAN (ECAN) modules. Operating voltage is 3.0 V to 3.6 V across the industrial temperature range of -40 C to +85 C. A digital signal controller (DSC) is a hybrid device that combines the real-time control peripherals and deterministic interrupt behavior of a microcontroller (MCU) with the single-cycle multiply-accumulate (MAC) arithmetic and barrel shifter of a digital signal processor (DSP). In the system hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it is a microcontroller-class device with DSP-class math throughput, used where closed-loop control must execute in microseconds. The dsPIC33E family is Microchip's third-generation 16-bit DSC platform targeting motor control, digital power conversion, and automotive sensorless field-oriented control. Key features include 70 MIPS operation at 70 MHz, 512 KB (170K x 24-bit) flash with 48 KB RAM, 12 motor-control PWM outputs with 1 ns edge resolution, four on-chip op amps with selectable gain, 8/8 input-capture/output-compare channels, two QEI interfaces, four DMA channels, and boundary-scan (JTAG) support. The 100-pin TQFP package exposes four 12-bit ADCs and connectivity including CAN, I2C, IrDA, LIN, SPI, and UART/USART, enabling single-chip control of dual-motor or PFC-plus-motor topologies. The device is fabricated in CMOS and uses a precision bandgap-based analog core for the integrated op amps and ADC references. The four on-chip op amps eliminate external signal-conditioning stages for current-shunt amplification in motor drives, reducing BOM count and PCB area. Boundary scan (JTAG) and four DMA channels reduce CPU overhead in data-movement-intensive control loops. The barrel shifter accelerates fixed-point DSP operations used in field-oriented control transforms. Typical applications include sensorless field-oriented control (FOC) of PMSM and BLDC motors, digital power supplies and PFC stages, automotive motor and pump controllers, industrial servo drives, and solar micro-inverters. The 70 MIPS core combined with 1 ns PWM resolution allows current-loop bandwidths above 10 kHz with adequate computational headroom for both Clarke-Park transforms and space-vector modulation. When designing with this device, note that the 100-pin TQFP (12x12 mm) footprint is shared across the dsPIC33EP512GM710 family, so firmware and layout can be reused across memory and temperature variants. Decouple each VDD pin with a 0.1 uF ceramic capacitor placed within 5 mm of the pin. Place the analog AVdd pins away from switching PWM traces to minimize coupling. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.

Cotação Contato
DSPIC33EP512GM710T-I/PF - 16-bit 70 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512GM710T-I/PF

DSPIC33EP512GM710T-I/PF - 16-bit 70 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM710T-I/PF is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS from 512 KB (170K x 24) of Flash program memory, integrated in a 100-pin TQFP (14x14 mm) package. It combines DSP engine, motor-control PWM, and analog integration in one chip. A digital signal controller is a hybrid of a microcontroller (MCU) and a digital signal processor (DSP): it executes general-purpose control code like an MCU while performing fast multiply-accumulate math like a DSP. In the embedded hierarchy, the DSC sits between MCUs and dedicated DSPs, ideal for closed-loop control systems such as field-oriented motor control and digital power conversion. Key features include 12 MCPWM channels for motor control, 8 input capture / 8 output compare channels, 2 quadrature encoder interfaces (QEI), 4 on-chip operational amplifiers, a CTMU charge-time-measurement unit for touch/timing applications, and the PTG programmable sequencer. Two CAN modules and multiple UART/SPI/I2C ports cover industrial communication needs. The dsPIC33E core uses a modified Harvard architecture with a 24-bit instruction word, DSP multiply-accumulate, barrel shifter, and DMA-supported data movement, allowing single-cycle MAC operations for filter and transform algorithms at 70 MIPS. Typical applications include precision BLDC/PMSM motor drives, digital power supplies, industrial automation, and sensor signal conditioning, where the integrated op amps and 12-channel MCPWM directly drive gate circuitry with minimal external components. Design consideration: the I variant is rated -40C to +85C; use the E variant for 125C environments, and budget Flash wisely since the GM710 has no external memory bus. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GM710T-I/PT - 16-bit 70 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512GM710T-I/PT

DSPIC33EP512GM710T-I/PT - 16-bit 70 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM710T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 70 MIPS performance with 512 KB (170K x 24) of Flash program memory, 48 KB of RAM, and a 3.3 V supply, housed in a 100-pin TQFP (12 x 12 mm) package with industrial temperature rating of -40C to +85C. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). In the embedded systems hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs, offering single-cycle MAC, DSP instruction support, and deterministic interrupt handling for real-time closed-loop control applications. Key features of the DSPIC33EP512GM710T-I/PT include the 70 MIPS dsPIC DSC core, 12 motor control PWM channels, 8 input capture and 8 output capture channels, two quadrature encoder interfaces (QEI), four integrated operational amplifiers, and a Charge Time Measurement Unit (CTMU) for capacitive touch and precision timing. The device also integrates a CAN 2.0B controller and multiple serial ports for industrial connectivity. Technically, the dsPIC33E core features a 16-bit modified Harvard architecture with a 24-bit instruction word, 13 timers, 4 DMA channels, and 4 serial I/O ports, enabling deterministic real-time behavior. The integrated op-amps can be internally connected to ADC inputs, reducing external component count in current-sense and signal-conditioning chains for motor drives. Typical applications include precision brushless DC and PMSM motor control, industrial power supplies, digital lighting (HID/LED ballasts), and embedded control systems requiring CAN networking. The four op-amps and QEI interfaces make the GM710 variant particularly well suited to servo and encoder-based motion systems. A key design consideration: the 100-pin TQFP has 0.40 mm lead pitch, requiring careful PCB land pattern design and reflow profiling; decouple all VDD/VSS pairs with 0.1 uF ceramics placed close to each supply pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, optimizing selection for engineers evaluating dsPIC33EP512GM710 options.

Cotação Contato
DSPIC33EP512GP502-E/MM - 16-bit DSC 512KB Flash 28-QFN | Microchip
DSPIC33EP512GP502-E/MM

DSPIC33EP512GP502-E/MM - 16-bit DSC 512KB Flash 28-QFN | Microchip

The Microchip Technology DSPIC33EP512GP502-E/MM is a 16-bit digital signal controller (DSC) with 512 KB flash program memory, 48 KB RAM, and a 60 MHz core delivering up to 70 MIPS performance, housed in a 28-pin QFN-S (6x6 mm) package with extended temperature support (-40C to +125C) and AEC-Q100 qualification. A digital signal controller combines the compute architecture of a 16-bit microcontroller with the multiply-accumulate and DSP instruction engine of a digital signal processor. Within the power-management hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs, making it ideal for control loops that require both fast math and rich peripheral integration. The dsPIC33E family is Microchip's high-performance 16-bit DSC platform for embedded control systems. Key features of the dsPIC33EP512GP502 include the highest-speed 70 MIPS dsPIC33E core, superior ADC performance, CAN communication, a Charge Time Measurement Unit (CTMU), an integrated operational amplifier (op amp) and comparators, high-speed PWM outputs, and a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. These peripherals offload timing-critical tasks from the CPU, reducing interrupt latency and firmware complexity. Technically, the device executes an enhanced 16-bit RISC instruction set with DSP extensions, supporting In-Circuit and In-Application Programming, two program and two complex data breakpoints, and IEEE 1149.2-compatible (JTAG) boundary scan for trace and run-time watch. The 512 KB flash is organized as 170K x 24-bit words, and on-chip flash ECC improves reliability in electrically noisy environments. Typical applications include digital power supplies and power factor correction, brushless DC and PMSM motor control, automotive body and comfort modules (leveraging AEC-Q100 qualification), and industrial sensing with the CTMU for capacitive-touch or time-domain measurements. For design, note that the QFN-28 package requires careful thermal pad grounding and the device typically runs from a single 3.3V supply with core voltage internally regulated via a VCAP capacitor - follow the manufacturer datasheet layout guidance exactly. This page synthesizes distributor pricing, pin-compatible family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33EP512GP502-E/SO - 70 MIPS 16-bit DSC 512KB Flash | Microchip
DSPIC33EP512GP502-E/SO

DSPIC33EP512GP502-E/SO - 70 MIPS 16-bit DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP502-E/SO is a 16-bit Digital Signal Controller (DSC) from the dsPIC33EP General Purpose family, delivering up to 70 MIPS core performance with 512 KB of Flash program memory, 48 KB of RAM, and an extended-temperature range of -40C to +125C in a 28-pin SOIC (7.50 mm width) surface-mount package. It operates from a 3.0 V to 3.6 V supply and integrates Hi-Speed PWM, analog comparators, op amps, and advanced analog peripherals for high-end embedded control. A Digital Signal Controller combines the peripheral set and cost structure of a microcontroller with the multiply-accumulate throughput of a DSP. Within Microchip's hierarchy, the dsPIC33EP sits above PIC16/PIC18 MCUs and alongside PIC24EP 16-bit MCUs, targeting real-time control loops such as digital power conversion, motor control, and digital filtering that general-purpose MCUs handle poorly. Key features include the 70 MIPS 16-bit core with DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator), 512 KB of self-programmable Flash organized as 170K x 24-bit words, 4 DMA channels, 5 timers, CAN 2.0B communication, a Charge Time Measurement Unit (CTMU), and the Peripheral Trigger Generator (PTG) for autonomous task triggering. The architecture provides superior ADC performance for the class, multiple PGECx/PGEDx ICSP debug channels, and 15 interrupt sources with low-power sleep and idle modes. The -E/ temperature grade (up to +125C) and AEC-Q100 qualification make it suitable for automotive and harsh-industrial environments. Typical applications include brushless DC and PMSM motor control, switch-mode power supplies and digital lighting ballasts, automotive body modules, and industrial sensing front-ends leveraging the integrated op amps and comparators. For design, note that this part has more than one pair of PGECx/PGEDx pins: use any pair for ICSP, but ICSPCLK and ICSPDAT must come from the same pair, and all VDD/VSS pins must be connected. The internal core regulator requires the specified VCAP capacitor. This page adds distributor inventory insights, drop-in same-family alternatives, and practical design notes beyond the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GP502-H/MM - 16-bit DSC 70 MIPS 512KB Flash | Microchip
DSPIC33EP512GP502-H/MM

DSPIC33EP512GP502-H/MM - 16-bit DSC 70 MIPS 512KB Flash | Microchip

The Microchip DSPIC33EP512GP502-H/MM is a 16-bit Digital Signal Controller (DSC) delivering up to 70 MIPS performance, 512 KB of Flash program memory, and 48 KB of RAM, housed in a 28-pin QFN-S (6x6 mm) package with exposed pad (MM suffix). A Digital Signal Controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a DSP core, sitting in the product hierarchy between general-purpose MCUs (such as the PIC16 family) and full DSPs. Within Microchip's portfolio, the dsPIC33E family serves embedded control applications that need math-intensive loops - digital power conversion, motor control, and digital filtering - while retaining an MCU-style programming model supported by the MPLAB X IDE and XC16 compiler toolchain. Key features of the dsPIC33EP512GP502 include a high-speed 16-bit pipeline core, high-speed PWM outputs for power conversion, integrated operational amplifiers and advanced analog peripherals, a 12-bit ADC with superior performance, CAN 2.0B communication, a Charge Time Measurement Unit (CTMU) for capacitive touch and time measurement, and a Peripheral Trigger Generator (PTG) for autonomous, high-end operation. Web data for the family also cites four DMA channels, five timers, and three external interrupt sources. The EP-series device operates from a 3.0 V to 3.6 V supply with the -H temperature option, and the family offers an extended 125C temperature option for harsh environments. The 28-QFN footprint with exposed pad provides good thermal and electrical performance in a compact 6x6 mm area, suiting space-constrained power electronics boards. Typical applications include digital power supplies ( LLC, buck/boost, PFC stages), brushless DC and PMSM motor control, digital lighting ballasts, battery chargers, and industrial sensing front-ends that leverage the on-chip op amps and CTMU. Design consideration: the 70 MIPS rating is achieved with PLL multiplication from an external crystal or internal FRC oscillator - budget PCB real estate for a clean 3.3 V rail and proper VDD/VSS decoupling near the exposed thermal pad, and confirm the -H operating temperature range against your worst-case enclosure temperature before finalizing the design. This page synthesizes verified distributor listings, drop-in family alternatives, and practical design guidance in one place - value beyond the raw manufacturer datasheet. Pricing and stock shown here are as of 2026-09-25.

Cotação Contato
DSPIC33EP512GP502-H/SO - 16-bit 60MHz DSC 512KB Flash | Microchip
DSPIC33EP512GP502-H/SO

DSPIC33EP512GP502-H/SO - 16-bit 60MHz DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP502-H/SO is a 16-bit Digital Signal Controller (DSC) delivering 60 MHz core operation (up to 70 MIPS class performance) with 512 KB of Flash program memory and 48 KB of RAM, housed in a 28-pin SOIC package with 7.50 mm body width. The H suffix denotes an extended operating temperature range, and the device integrates op amps, comparators, a Peripheral Trigger Generator (PTG), and a CAN module on a single chip. A Digital Signal Controller combines the control peripherals of a microcontroller with the mathematical throughput of a DSP. In the embedded hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33E family a natural choice for real-time closed-loop control such as digital power conversion, motor control, and digital filtering, where deterministic interrupt latency and single-cycle MAC operations matter more than raw processing throughput. Key features include 512 KB of self-programmable Flash with ECC, 48 KB of on-chip RAM, dual on-chip operational amplifiers for analog front-end conditioning, two analog comparators, a high-speed PWM engine suited to power conversion, four DMA channels, five 16-bit timers, and a CAN 2.0B controller for automotive and industrial networking. Fifteen interrupt sources and low-power sleep/idle modes round out the peripheral set. Architecturally, the dsPIC33E core uses an enhanced Harvard pipeline with DSP instruction extensions, including modulo and bit-reversed addressing for FFTs and FIR/IIR filters. The Peripheral Trigger Generator (PTG) automates peripheral-to-peripheral sequencing with minimal CPU intervention, freeing MIPS for control algorithms. On-chip op amps can directly interface current-sense resistors and sensor bridges, reducing external BOM count. Typical applications include brushless DC and PMSM motor drives, digitally controlled AC-DC and DC-DC power supplies, CAN-enabled automotive and industrial sensor nodes, and general-purpose control systems requiring embedded analog and DSP filtering. For design, place VCAP/VDDCORE decoupling per the Microchip reference layout and verify CAN transceiver timing against the system bit rate early in development. This page synthesizes distributor availability data, drop-in same-package alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GP502-H/SP - 16-Bit DSC 60MIPS 512KB Flash | Microchip
DSPIC33EP512GP502-H/SP

DSPIC33EP512GP502-H/SP - 16-Bit DSC 60MIPS 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP502-H/SP is a 16-bit digital signal controller (DSC) delivering up to 60 MIPS core performance with 512KB (170K x 24) of Flash program memory and 48KB of RAM, housed in a 28-pin SPDIP (0.300 in, 7.62 mm) through-hole package. A digital signal controller combines the computational capability of a digital signal processor with the peripheral integration and control-loop architecture of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33E family a common choice for tightly time-closed-loop control applications such as motor control, digital power conversion, and sensor signal processing. Key features of the dsPIC33EP512GP502 include high-speed PWM peripherals, integrated op amps and comparators (advanced analog), a Controller Area Network (CAN) module, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, and a Peripheral Trigger Generator (PTG) for autonomous task scheduling. These resources reduce external component count in mixed signal-control designs. Architecturally, the dsPIC33E general purpose family features Microchip's highest-speed 70 MIPS-class E-core with excellent performance and code density, 24-bit instruction width, DSP multiply-accumulate instructions, and superior ADC performance for accurate analog acquisition. The 3.0V to 3.6V supply range supports standard 3.3V systems, and ICSP programming/debugging is available through any PGECx/PGEDx pin pair used as a matched pair. Typical applications include digital power supplies, BLDC and PMSM motor control, industrial automation nodes with CAN connectivity, and touch-sensing interfaces leveraging the CTMU. The 28-pin through-hole SPDIP format also makes the device well suited for prototypes, development boards, and repairable industrial equipment. A key design consideration: with more than one PGECx/PGEDx pair available, ICSP programming tools must use pins from the same pair, and all VDD and VSS pins must be connected with decoupling capacitors for reliable operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GP502-I/SO - 16-Bit 70 MIPS DSC, 512KB Flash | Microchip
DSPIC33EP512GP502-I/SO

DSPIC33EP512GP502-I/SO - 16-Bit 70 MIPS DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP502-I/SO is a 16-bit Digital Signal Controller (DSC) delivering up to 70 MIPS core performance with 512 KB (170K x 24) of Flash program memory and 48 KB of RAM, housed in a 28-pin SOIC (7.50 mm body width) industrial-temperature package. A Digital Signal Controller combines the peripheral set and ease of use of a microcontroller with the mathematical throughput of a DSP engine in a single core. In the power-management hierarchy, the dsPIC33EP family sits between general-purpose MCUs (such as the PIC24) and dedicated DSPs, making it the default choice for embedded digital power conversion, motor control, and sensor-signal-chain products that need both control code and real-time math on one chip. Key features include the 70 MIPS dsPIC33E core with DSP instruction support and code-density improvements over the dsPIC33F generation, high-speed PWM outputs suited to digital power supplies, integrated analog peripherals (ADC, comparators, op amps, and CTMU charge-time measurement), and the Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. Communications cover CAN, UART, SPI, and I2C for industrial networking. The device provides 4 DMA channels, 5 timers, and 15 interrupt sources per distributor documentation, with a CMOS process and low-power modes for battery-conscious designs. Flash self-programming supports field firmware updates, and the wide operating voltage range suits industrial supply rails. Typical applications include digital power supplies and power-factor-correction converters, brushless DC and PMSM motor drives, and industrial control panels where CAN connectivity plus fast ADC sampling and PWM generation are required on a compact 28-pin footprint. A key design consideration is clock configuration: the 70 MIPS performance requires correct PLL configuration (FOSC/2 instruction rate); designs must also budget the two oscillator pins consumed when an external crystal is used. This page synthesizes distributor pricing, drop-in same-footprint alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GP502T-E/MM - 16-bit DSC 512KB Flash 60 MIPS | Microchip
DSPIC33EP512GP502T-E/MM

DSPIC33EP512GP502T-E/MM - 16-bit DSC 512KB Flash 60 MIPS | Microchip

The Microchip Technology DSPIC33EP512GP502T-E/MM is a 16-bit dsPIC33EP general-purpose digital signal controller (DSC) delivering up to 60 MIPS of DSP-enhanced performance with 512 KB (170K x 24) of FLASH program memory and 48 KB of RAM, housed in a 28-pin QFN-S (6x6 mm) package with an extended operating temperature range of -40C to +125C. A digital signal controller combines the deterministic control structure of a microcontroller with the math acceleration of a DSP engine. Within the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes single-cycle MAC and 40-bit accumulate instructions for filtering and control loops, while retaining interrupt-driven peripherals, watchdog timers and flash self-programming typical of PIC microcontrollers. The dsPIC33EP family is Microchip's E-core generation, superseding the dsPIC33F with higher speed and richer analog integration. Key features include CAN 2.0B, I2C, SPI, UART/IrDA and LINbus connectivity, high-speed PWM modules for motor control and power conversion, up to two on-chip operational amplifiers, three analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise timing, and a Peripheral Trigger Generator (PTG) for autonomous task scheduling that offloads the CPU. Architecturally, the dsPIC33EP core pairs a 16-bit MCU pipeline with a DSP engine supporting 32-bit multiply, fractional and integer arithmetic, and dual operand fetch, plus DMA channels that move ADC and communication data without CPU intervention. The superior ADC performance of this family suits high-bandwidth closed-loop control in digital power supplies and sensor conditioning. Typical applications include digital power supplies and battery chargers using the hi-speed PWM, brushless DC and PMSM motor drives, and industrial nodes requiring CAN bus networking with DSP filtering on sensor inputs. Design-wise, reserve the FLASH programming budget carefully - the 512 KB density allows table-driven FOC algorithms, but ECC-style flash endurance still favors logging in external EEPROM; also confirm QFN thermal pad soldering for extended temperature operation. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GP502T-I/MM - 16-bit 70 MIPS DSC, 512KB Flash | Microchip
DSPIC33EP512GP502T-I/MM

DSPIC33EP512GP502T-I/MM - 16-bit 70 MIPS DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP502T-I/MM is a 16-bit dsPIC33EP general-purpose digital signal controller (DSC) delivering up to 70 MIPS from its 16-bit DSP-extended core, with 512 KB (170K x 24) of Flash program memory, 48 KB of RAM, and an integrated op amp and comparators, housed in a 28-pin QFN-S (6x6 mm) exposed-pad surface-mount package. A digital signal controller combines the deterministic control structure of a microcontroller with the math acceleration of a DSP engine, including single-cycle multiply-accumulate (MAC) and hardware division support. DSCs occupy the middle of the embedded hierarchy between general-purpose MCUs and dedicated DSP ICs, making them the default choice for closed-loop power conversion and motor control where fast interrupt response and fixed-point arithmetic both matter. Key features include 70 MIPS maximum core speed, 12-bit ADC performance with high sample-rate conversion, dual integrated operational amplifiers and comparators, a Charge Time Measurement Unit (CTMU), CAN 2.0B communication, four DMA channels, five 16-bit timers, high-speed PWM outputs, and a Peripheral Trigger Generator (PTG) that automates peripheral sequencing with minimal CPU intervention. Operating voltage is 3.3 V (per datasheet-class listing: 16-bit dsPIC RISC, 512 KB Flash, 3.3 V, 28-pin QFN-S EP, tape and reel). The dsPIC33EP architecture pairs the enhanced Flash with an execution pipeline that sustains single-cycle instruction throughput at 70 MIPS, and the PTG plus DMA offload keeps the core free during time-critical control loops. The integrated op amps directly condition current-shunt or resolver signals ahead of the ADC, reducing external BOM count. Typical applications span sensorless BLDC and PMSM motor control, digital power supplies (PFC, LLC), industrial automation nodes with CAN connectivity, and general-purpose signal conditioning where analog integration reduces board area. Design consideration: the QFN-S exposed pad must be soldered to a grounded thermal pad for both heat dissipation and signal integrity; VCAP/VDDCORE requires the manufacturer-specified capacitance for stable core regulation. This page adds value beyond the raw datasheet by consolidating distributor pricing, verified drop-in alternatives, practical layout notes, and an honest comparison across temperature-grade variants.

Cotação Contato
DSPIC33EP512GP504-E/ML - 16-Bit DSC 70 MIPS 512KB | Microchip
DSPIC33EP512GP504-E/ML

DSPIC33EP512GP504-E/ML - 16-Bit DSC 70 MIPS 512KB | Microchip

The Microchip Technology DSPIC33EP512GP504-E/ML is a 16-bit Digital Signal Controller (DSC) delivering up to 70 MIPS core performance from 512 KB flash memory and 48 KB RAM, housed in a 44-pin QFN (8x8 mm) package with extended temperature rating (-40C to +125C). A Digital Signal Controller combines the compute throughput of a digital signal processor with the peripheral integration and ease of use of a microcontroller, sitting within the broader hierarchy of embedded processors: DSC -> 16-bit microcontroller -> system-on-chip embedded controller. DSCs are the preferred choice where real-time control loops, such as motor commutation or digital power conversion, must execute math-intensive algorithms on every PWM cycle. Key features of this dsPIC33EP general purpose (GP) family member include on-chip operational amplifiers and analog comparators, a CAN 2.0B module, a Peripheral Trigger Generator (PTG) for autonomous peripheral coordination, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-domain measurements, and high-speed PWM outputs suited to digital power and motor control. The -E/ML suffix denotes the extended (-40C to +125C) temperature option in the exposed-pad QFN-44 package, which improves thermal performance over plastic DIP or SOIC alternatives. The dsPIC33EP core executes most instructions in a single cycle with DSP multiply-accumulate (MAC) instructions, supporting 40-bit accumulators and hardware fractional arithmetic. Its ECC-free flash program memory of 512 KB (170K x 24-bit words) is programmed via ICSP/ICD with multiple PGECx/PGEDx pin pairs, easing fixture design. Dual oscillator support and a wide 2.97V to 3.63V operating range simplify industrial power design. Typical applications include sensor acquisition and conditioning (leveraging the on-chip op amps), general-purpose industrial control, digital power supplies, and embedded systems that need CAN networking with DSP math capability. Designers should note that all VDD/VSS pairs must be connected and that any matched PGEC/PGED pair must be used together during programming. This page adds value beyond the manufacturer datasheet by consolidating distributor pricing, drop-in same-family alternatives, and selection guidance in one AI-readable reference.

Cotação Contato
DSPIC33EP512GP504-E/MV - 16-bit 60MIPS DSC 512KB CAN | Microchip
DSPIC33EP512GP504-E/MV

DSPIC33EP512GP504-E/MV - 16-bit 60MIPS DSC 512KB CAN | Microchip

The Microchip Technology DSPIC33EP512GP504-E/MV is a 16-bit Digital Signal Controller (DSC) delivering 60 MIPS performance with 512 KB (170K x 24) of FLASH program memory, 48 KB of RAM, and an CAN 2.0B peripheral, housed in a 48-pin UQFN (6x6 mm) package rated from -40C to +125C. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and ease of use of a microcontroller. DSCs sit above general-purpose MCUs in the embedded hierarchy, adding hardware multiply-accumulate (MAC), division support, and DSP instruction support for real-time control loops, while retaining conventional MCU peripherals such as UART, SPI, I2C, and timers. Key features of the dsPIC33EP512GP504 include a 3.0V to 3.6V single-supply operating range, up to 85 general-purpose I/O families' features condensed here into 35 I/O on this pin count, five 16-bit timers, four DMA channels, a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing, and advanced analog including a high-speed 10/12-bit ADC with multiple sample-and-hold circuits. The dsPIC33E core executes most instructions in a single cycle at 60 MIPS and supports DSP addressing modes with dual operand fetch, making it well suited for closed-loop control mathematics. The high-speed PWM module, CAN 2.0B controller, and CTMU-based touch sensing support round out a peripheral set designed for industrial and automotive-adjacent designs; the -E temperature suffix provides full -40C to +125C operation. Typical applications include motor control (BLDC, PMSM, ACIM), digital power conversion and inverters, CAN-based industrial networking nodes, and embedded sensing systems that need DSP-class math. Design consideration: the 3.0-3.6V supply window requires a well-regulated LDO or buck; all VDD/VSS pairs must be bypassed with 100 nF ceramics placed directly at the pins per Microchip layout guidance. This page consolidates verified distributor pricing, drop-in same-family alternatives, pinout data, and practical design notes not found on any single manufacturer or distributor page.

Cotação Contato
DSPIC33EP512GP504-E/PT - 16-Bit DSC 512KB Flash 60MIPS | Microchip
DSPIC33EP512GP504-E/PT

DSPIC33EP512GP504-E/PT - 16-Bit DSC 512KB Flash 60MIPS | Microchip

The Microchip Technology DSPIC33EP512GP504-E/PT is a 16-bit digital signal controller (DSC) with 512KB (170K x 24) of Flash program memory, 48KB of RAM, and a 60 MIPS (60 MHz) core, housed in a 44-pin TQFP (PT, 10x10 mm) package with an extended -40C to +125C temperature grade. A digital signal controller combines the compute architecture of a microcontroller with the math acceleration of a DSP. Within the power management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSPs, offering deterministic single-cycle MAC/DSP instructions alongside standard peripherals. Microchip's dsPIC33EP family is the successor to the dsPIC33F line, built on a faster, lower-power core with richer analog integration. Key features include dual CAN 2.0B modules for industrial networking, integrated op amps and comparators that offload external signal-conditioning parts, a Peripheral Trigger Generator (PTG) for autonomous task scheduling, a Charge Time Measurement Unit (CTMU) for capacitive touch and precision time measurement, and high-speed PWM suitable for power conversion. The dsPIC33E core executes DSP instructions with single-cycle MAC, dual operand fetch, and a hardware divide, while four DMA channels move ADC data without CPU intervention. Five 16-bit timers support precise PWM generation and event capture. The integrated op amps feed the 10/12-bit ADC directly, reducing board area and noise coupling in mixed-signal designs. Typical applications include motor control (BLDC, PMSM, stepper), digital power supplies and lighting, industrial automation nodes on CAN, and automotive sub-systems where the -E extended temperature grade is valuable. Design tip: all VDD/VSS pairs must be decoupled and ICSP programming pairs (PGECx/PGEDx) must be routed as matched pairs to the programming header. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GP504-H/ML - 16-bit DSC 512KB Flash 60MIPS | Microchip
DSPIC33EP512GP504-H/ML

DSPIC33EP512GP504-H/ML - 16-bit DSC 512KB Flash 60MIPS | Microchip

The Microchip Technology DSPIC33EP512GP504-H/ML is a 16-bit digital signal controller (DSC) delivering up to 60 MIPS from 512KB (170K x 24) of Flash program memory with 48KB of RAM, housed in a 44-pin QFN (8x8 mm) package. A digital signal controller combines the computational core of a 16-bit microcontroller with DSP-grade instruction support (single-cycle MAC, DSP multiply, hardware divide), making the dsPIC33EP family a bridge between general-purpose MCUs and dedicated DSPs in the embedded power-management hierarchy. Members of this family integrate high-speed PWM, analog comparators, op amps, CAN, and the Peripheral Trigger Generator (PTG) for autonomous operation. Key features of this part include the 16-bit dsPIC33EP CPU core running at up to 60 MIPS, 512KB self-programmable Flash, 48KB on-chip RAM, and an advanced analog subsystem with op amps and comparators as documented by Microchip and distributor listings. The GP504 variant is the general-purpose (GP) derivative of the dsPIC33EPxxxGP50x family, targeted at designs needing both control flow and signal-processing throughput in a compact 44-pin footprint. Architecturally, the dsPIC33EP core supports a modified Harvard pipeline, hardware loop constructs (DO and REPEAT), and interrupts with deterministic latency, while the peripheral ecosystem includes multiple UART, SPI, and I2C serial ports, input capture/output compare channels, and high-speed PWM modules suited to digital power conversion. Typical applications include digital power supplies and LED drivers that exploit the high-speed PWM, motor control (BLDC/PMSM) drives using DSP math, and industrial control or CAN-networked sensor nodes that benefit from integrated analog and CAN 2.0B. Design consideration: run the core from the internal PLL and budget the watchdog and low-dropout regulator settings carefully; the ML QFN thermal pad should be soldered to a ground pour for best thermal and noise performance. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GP504-H/TL - 16-bit 60 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512GP504-H/TL

DSPIC33EP512GP504-H/TL - 16-bit 60 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP504-H/TL is a 16-bit digital signal controller (DSC) delivering 60 MIPS performance from a single-supply 3.0V to 3.6V core, with 512KB (170K x 24) of Flash program memory, 48KB of RAM, and integrated op amps, comparators, CAN and a Peripheral Trigger Generator (PTG), housed in a 44-pin VTLA (6x6 mm) package. A digital signal controller combines the control peripherals of a microcontroller with the computational engine of a DSP. Within the power-management hierarchy of embedded systems, the DSC sits above a basic MCU (adding hardware multiply-accumulate, DSP loops and high-speed PWM) while remaining simpler than an application processor, making it the standard choice for real-time control loops in motor drives, digital power conversion and precision sensing. Key features of this part include a 16-bit dsPIC33E core running at 60 MIPS, 512KB of self-programmable Flash with ECC-class endurance, 48KB of on-chip SRAM with 4-channel DMA, two on-chip operational amplifiers, comparators, a CAN 2.0B controller, and high-speed PWM outputs suited to digital power and motion control. The GP (general purpose) variant emphasizes advanced analog integration, including the CTMU (Charge Time Measurement Unit) for touch/timing measurement. The dsPIC33EP architecture pairs a pipelined 16-bit CPU with DSP instruction support (MAC, dual fetch) and rich peripherals clocked independently of the core. The -H suffix denotes a temperature-qualified device, and the /TL suffix identifies the 44-lead VTLA (6x6 mm) surface-mount package, a compact QFN-style footprint that keeps loop inductance low for PWM-heavy designs. Typical applications include sensor aggregation and signal conditioning (exploiting the on-board op amps), CAN-networked industrial nodes, general-purpose embedded control requiring large 512KB program memory, and auxiliary power or telemetry boards that need DSP-class math without an external analog front end. Design consideration: the 3.0V-3.6V supply and the 6x6 mm thermal pad layout require a solid ground plane and localized 0.1uF decoupling at every VDD pin; verify which PGECx/PGEDx pair you route for ICSP, as programming requires a matched PGEC/PGED pair. This page synthesizes verified distributor data, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GP504T-E/ML - 16-bit 60 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512GP504T-E/ML

DSPIC33EP512GP504T-E/ML - 16-bit 60 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP504T-E/ML is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 60 MIPS from 512KB (170K x 24) of FLASH program memory and 24KB of RAM, housed in a 44-QFN (8x8 mm) exposed-pad package rated -40C to +125C (AEC-Q100 automotive grade). A digital signal controller combines the computational throughput of a DSP with the peripheral integration and deterministic control flow of a microcontroller. Within the power-management hierarchy, the dsPIC33EP family sits above general-purpose MCUs and alongside dedicated DSPs, making it the standard choice for closed-loop control systems that require fast math (multiply-accumulate, division, trigonometric) alongside CAN, I2C, SPI, and UART connectivity in a single 3.3V device. Key features include the 16-bit dsPIC33EP core with DSP engine (single-cycle MAC, 40-bit accumulators), 512KB of self-programmable flash, 4 DMA channels, 5 timers, and rich analog and connectivity peripherals: CANbus, I2C, SPI, UART/USART, IrDA, and LINbus. The E temperature grade (-40C to +125C) and AEC-Q100 qualification make this tape-and-reel variant suitable for automotive and high-reliability industrial builds. Architecturally, the core runs up to 60 MIPS from an internal PLL-driven FRC or external crystal, with a 3.0V to 3.6V supply and a maximum supply current of approximately 55 mA. Dual-fetch instruction pipeline plus hardware division and DSP instructions allow math-intensive loops (PID, filters, transformations) to execute deterministically without external coprocessors. The ML QFN exposed pad improves thermal performance and ground integrity versus leaded equivalents. Typical applications include automotive body and powertrain-adjacent control nodes, digital power supplies and PFC stages, sensorless BLDC and PMSM motor control, and industrial CAN-networked sensors and actuators. The CAN module plus DMA makes it a natural fit for 500 kbps vehicle and factory bus nodes. For design, budget flash erase/write cycles and reserve the configuration words carefully; on the 44-QFN package the exposed pad must be soldered to a solid ground pour for thermal and EMC performance. Verify the exact pin assignment in the manufacturer datasheet before layout, as peripheral remapping applies. This page synthesizes verified distributor data, same-family drop-in alternatives, and practical design notes not found in the standard manufacturer product listing.

Cotação Contato
DSPIC33EP512GP504T-E/PT - 16-bit DSC 512KB Flash 44-TQFP | Microchip
DSPIC33EP512GP504T-E/PT

DSPIC33EP512GP504T-E/PT - 16-bit DSC 512KB Flash 44-TQFP | Microchip

The Microchip Technology DSPIC33EP512GP504T-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP general-purpose family, delivering up to 60 MIPs of performance with 512KB (170K x 24) of Flash program memory, 48KB of RAM, and a 44-pin TQFP (10x10 mm, PT) surface-mount package in an extended temperature grade (-40C to +125C) with AEC-Q100 automotive qualification. A digital signal controller combines the peripheral set and ease of use of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. Within the semiconductor hierarchy, the dsPIC33EP sits below 32-bit MCUs in word width but above classic 8-bit PIC controllers, occupying the power-management, motor-control, and embedded-control tier where 16-bit deterministic execution and integrated analog are preferred over standalone DSP + MCU two-chip solutions. Key features include the integrated CAN 2.0B module for automotive and industrial networking, three on-chip operational amplifiers and four comparators that reduce external analog component count, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-domain measurements, and a Peripheral Trigger Generator (PTG) for hardware-sequenced autonomous operation. Superior ADC performance in the dsPIC33E family supports precision sensing, and the DSP engine enables filtering and control-loop math at full core speed. Architecturally, the device uses a modified Harvard 16-bit core with a 24-bit instruction word, pipelined execution, and hardware DSP multiply/divide support. The large 512KB Flash array with self-programming capability supports field firmware updates, while the 48KB RAM accommodates control algorithms, communication buffers, and signal-processing workloads. Typical applications include automotive body and powertrain auxiliary modules, digital power supplies, precision motor control (BLDC, PMSM, FOC), industrial sensing nodes, and capacitive-touch human-machine interfaces. A key design consideration: the /T suffix indicates Tape-and-Reel packaging for automated assembly, and the -E grade extends operating temperature to +125C ambient, so thermal layout on the TQFP-44 should target low theta_JA copper pours in hot enclosures. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33EP family, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GP504T-E/TL - 16-bit 60 MIPS DSC 512KB | Microchip
DSPIC33EP512GP504T-E/TL

DSPIC33EP512GP504T-E/TL - 16-bit 60 MIPS DSC 512KB | Microchip

The Microchip Technology DSPIC33EP512GP504T-E/TL is a 16-bit dsPIC33EP general purpose digital signal controller (DSC) operating at 60 MIPS, with 512KB (170K x 24) of FLASH program memory, 24K x 16 of RAM, and an extended-temperature 44-VTLA (6x6 mm) VQFN-type surface-mount package. This tape-and-reel AEC-Q100 qualified device integrates a DSP-enhanced PIC core with CANbus, I2C, IrDA, LINbus, SPI, and UART/USART connectivity. A digital signal controller is a hybrid device that merges the deterministic control of a microcontroller with the math throughput of a DSP. Within the power-management hierarchy, the dsPIC33EP family sits alongside 16-bit MCUs in the broader microcontroller and embedded processor category, and is commonly deployed as the main control IC in motor drives, digital power supplies, and sensing systems. Key features include the 16-bit dsPIC core delivering up to 60 MIPS in this speed grade, 512KB of self-programmable FLASH with ECC-style endurance, and rich analog and connectivity peripherals: CAN 2.0B, multiple UARTs, SPI and I2C ports, op amps, comparators, and a CTMU charge-time-measurement unit. A Peripheral Trigger Generator (PTG) automates peripheral sequencing to offload the CPU. Four DMA channels accelerate data movement between peripherals and the 24K x 16 RAM block. Architecturally, the dsPIC33EP uses a modified Harvard pipeline with DSP multiply-accumulate instructions, hardware division support, and flexible clocking via PLL from an internal or external source. Supply voltage range is 3.0V to 3.6V with a maximum supply current around 55 mA, and the E-grade temperature rating supports extended industrial environments. Typical applications include automotive body and powertrain subsystems (leveraging AEC-Q100 qualification and CAN), industrial motor control using the DSP MAC engine, and digital power conversion where the ADC plus PTG closes control loops deterministically. Design consideration: this T-suffix tape-and-reel ordering code targets automated assembly; verify the 44-VTLA footprint land pattern and exposed-pad thermal design before layout, since the 6x6 mm QFN-family package dissipates heat primarily through the PCB. This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GP504T-I/PT - 16-bit DSC 512KB Flash 70MIPS | Microchip
DSPIC33EP512GP504T-I/PT

DSPIC33EP512GP504T-I/PT - 16-bit DSC 512KB Flash 70MIPS | Microchip

The Microchip Technology DSPIC33EP512GP504T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP general-purpose family, delivering 70 MIPS performance, 512KB (170K x 24) of Flash program memory, 48KB of RAM, and a 44-pin TQFP (10x10 mm) package operating from a 3.3V supply. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral integration and ease of use of a microcontroller. In the system hierarchy, DSCs sit between general-purpose microcontrollers and dedicated DSP chips, offering single-cycle MAC instructions and DSP engine support alongside standard MCU peripherals such as UART, SPI, I2C, and CAN. The dsPIC33EP family is Microchip's high-performance 16-bit DSC generation built around an enhanced dsPIC33E core. Key features of this device include the 70 MIPS dsPIC33E core with DSP instruction extensions, integrated CAN 2.0B module for industrial networking, on-chip operational amplifiers and comparators that reduce external component count in analog signal chains, and a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. The T suffix denotes tape-and-reel packaging, and the I suffix indicates the industrial temperature rating. Technically, the enhanced flash architecture supports self-programming and the device integrates a high-performance ADC with multiple sample-and-hold circuits suitable for precision motor control and power conversion feedback loops. The CTMU (Charge Time Measurement Unit) enables capacitive touch and time-based measurements. Typical applications include motor control drives, digital power supplies, industrial automation nodes using CAN, sensor fusion and conditioning systems leveraging the on-chip op amps, and general-purpose embedded control requiring DSP-level math throughput. When designing with this device, plan the 3.3V power rail decoupling carefully and reserve the Peripheral Pin Select (PPS) mapping early, since pin functions are software-assigned. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GP506-I/MR - 70MIPS 512KB DSC VQFN-64 | Microchip
DSPIC33EP512GP506-I/MR

DSPIC33EP512GP506-I/MR - 70MIPS 512KB DSC VQFN-64 | Microchip

The Microchip Technology DSPIC33EP512GP506-I/MR is a 16-bit Digital Signal Controller (DSC) delivering 70 MIPS performance with 512 KB of Flash program memory and 48 KB of RAM, housed in a 64-pin VQFN (MR, 9x9 mm) package with exposed pad and industrial temperature rating of -40C to +85C. A Digital Signal Controller combines the deterministic control flow of a microcontroller with the multiply-accumulate throughput of a DSP engine, sitting between a general-purpose MCU and a dedicated DSP in the embedded processor hierarchy. This makes the dsPIC33E family well suited to closed-loop control systems such as digital power conversion, motor control, and sensor signal conditioning where both fast math and rich peripherals are required. Key features include the 16-channel 10/12-bit ADC with up to 1.1 Msps conversion rate, integrated op amps and comparators, high-speed PWM with complementary outputs and dead-time control, CAN 2.0B for industrial networking, and the Charge Time Measurement Unit (CTMU) for capacitive touch and precision time measurement. The Peripheral Trigger Generator (PTG) automates ADC sampling sequences, offloading the CPU. The dsPIC33EP core features a modified Harvard architecture with a 17x17-bit hardware multiplier, 40-bit barrel shifter, two 40-bit accumulators and dual-DSP multiply-accumulate in a single cycle. IEEE 1149.2 (JTAG) boundary scan, in-circuit programming (ICSP), and two program/complex data breakpoints support development and production test. Typical applications include brushless DC and PMSM motor drives, digital SMPS and PFC stages, UPS systems, industrial automation nodes, and sensor acquisition front ends. The 53 general-purpose I/O pins provide ample connectivity for gate drivers, relays and communication buses. Design consideration: power the device from a 3.0 V to 3.6 V rail, place the on-chip regulator capacitor (VCAP) close to its pin, and budget flash endurance at 100 erase/write cycles per Microchip's datasheet when implementing in-application programming. This page synthesizes distributor pricing, drop-in family alternatives, pinout data, and practical design notes not found together in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512GP806-I/PT - 70 MIPS 16-bit DSC 512KB Flash | Microchip
DSPIC33EP512GP806-I/PT

DSPIC33EP512GP806-I/PT - 70 MIPS 16-bit DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP806-I/PT is a 16-bit general purpose Digital Signal Controller (DSC) that integrates a 70 MIPS dsPIC33E core, 512 KB of Flash program memory, and 53,248 bytes of SRAM in a 64-pin TQFP (10x10 mm) industrial-temperature package. A Digital Signal Controller (DSC) combines the computational capability of a Digital Signal Processor (DSP) with the peripheral integration and programming simplicity of a microcontroller (MCU). In the semiconductor taxonomy, the dsPIC33E family sits between general-purpose 16-bit MCUs and dedicated DSPs, offering single-cycle MAC, hardware divide, and DSP-style addressing while retaining standard MCU peripherals such as UART, SPI, I2C, timers, and PWM. This dual identity lets engineers implement closed-loop control and signal processing on a single chip without a separate DSP. Key features include dual CAN 2.0B controllers for industrial networking, a Data Converter Interface (DCI) for audio codec connection, three analog comparators, a Real-Time Clock and Calendar (RTCC), and a Parallel Master Port (PMP) that simplifies 8-bit parallel graphic display interfacing. The enhanced Peripheral Pin Select (PPS) system allows remapping of many digital peripherals onto flexible RPn pins, dramatically improving board-level routing. Architecturally, the dsPIC33E core executes most instructions in a single cycle at up to 70 MIPS, with optimized C compiler support and DSP library routines for FIR/IIR filtering, FFT, and high-speed precision control loops. The integrated analog block and high-speed PWM modules support demanding embedded control designs while keeping BOM cost low. Typical applications include industrial automation, sensorless and sensored motor drives (FOC), CAN-based automotive and industrial nodes, digital audio and speech processing, and graphic-display-based HMI systems where the PMP accelerates frame-buffer writes. When designing with this device, provide proper decoupling on the internal core regulator (VCAP) pin and follow Microchip programming guidelines for PGEC/PGD pairs, which are sensitive to cross-talk. This page synthesizes distributor pricing, drop-in family alternatives, pinout references, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33EP512GP806T-E/PT - 16-Bit DSC 512KB 60MIPS | Microchip
DSPIC33EP512GP806T-E/PT

DSPIC33EP512GP806T-E/PT - 16-Bit DSC 512KB 60MIPS | Microchip

The Microchip Technology DSPIC33EP512GP806T-E/PT is a 16-bit dsPIC33E Digital Signal Controller (DSC) with 512 KB (170K x 24) Flash program memory, 24 KB RAM, and a 60 MIPS dsPIC RISC core, housed in a 64-pin TQFP (10x10 mm) package. It is an AEC-Q100 automotive-grade device operating from a 3.0 V to 3.6 V supply. A Digital Signal Controller is a hybrid device that combines the real-time control peripherals and interrupt behavior of a microcontroller with the single-cycle multiply-accumulate (MAC) datapath of a digital signal processor. In the product taxonomy, a DSC sits between a general-purpose MCU and a dedicated DSP: it is a member of the microcontroller family, a subclass of embedded processors, and a component of the broader semiconductor IC category. The dsPIC33E family targets closed-loop control, digital filtering, and mixed-signal applications where deterministic latency matters more than raw throughput. The DSPIC33EP512GP806T-E/PT integrates dual CAN (CANbus) controllers, I2C, IrDA, LINbus, SPI, and UART/USART interfaces, plus DMA, PWM, and a watchdog timer (WDT). Its analog subsystem includes multiple 10-bit/12-bit ADC modules with up to 24 analog channels on 64-pin devices, sample-and-hold circuits, and up to three analog comparator modules with programmable 32-point voltage references. The 70 MIPS-class core executes digital filter algorithms and high-speed precision control loops in a single cycle per MAC. The 'T' suffix denotes tape-and-reel packaging, the 'E' suffix denotes the extended -40C to +125C temperature range, and the '/PT' suffix denotes the 64-pin TQFP (10x10) package. The automotive AEC-Q100 qualification makes this variant suitable for under-hood and body-control electronics, while the general-purpose 'GP' peripheral mix (dual CAN, rich ADC, no dedicated motor-control PWM) suits industrial gateways, sensor fusion nodes, and multi-axis control boards. Typical applications include automotive body control modules, industrial CAN gateways, digital power conversion, motor control, and instrumentation. Designers should note the 3.3 V core/supply requirement, the need for proper VDD/VSS decoupling on every supply pin pair, and the ICSP programming constraint that PGECx and PGEDx must be used as a matched pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato