Microcontroladores

Produtos (18756)

DSPIC33EP512GP806T-I/MR - 16-bit 70 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512GP806T-I/MR

DSPIC33EP512GP806T-I/MR - 16-bit 70 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP806T-I/MR is a 16-bit dsPIC33EP general-purpose Digital Signal Controller (DSC) delivering 70 MIPS performance with 512KB (170K x 24) of Flash program memory and 53248 bytes of RAM, housed in a 64-pin VQFN (9x9 mm) package rated for -40C to +85C industrial operation. A Digital Signal Controller combines the deterministic interrupt architecture and peripherals of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the embedded systems hierarchy, the dsPIC33EP family sits between general-purpose MCUs and dedicated DSPs, making it the preferred choice when control loops require both fast math and rich communication peripherals in a single chip. Key features include the 16-bit dsPIC33E CPU core running up to 70 MIPS with DSP instruction support, two enhanced CAN 2.0B modules for industrial and automotive networking, up to three analog comparators with 32-point programmable references, a Real-Time Clock and Calendar (RTCC), and a Parallel Master Port (PMP) that simplifies connection to graphic displays through an 8-bit parallel interface. The integrated analog subsystem provides high-performance ADC capability with 24 analog channels on 64-pin devices, flexible and independent ADC trigger sources, and support for simultaneous sampling through multiple sample-and-hold circuits. Communication coverage spans CAN, I2C, SPI, UART/USART, LINbus, IrDA, and DCI (Data Converter Interface) for audio codec connectivity. Peripheral Pin Select (PPS) allows digital peripherals to be remapped to unused physical pins, maximizing board layout flexibility. Typical applications include industrial motor control and digital power conversion ( exploiting the DSP engine and high-speed PWM), CAN-based automotive and industrial gateways (leveraging the dual CAN modules), and graphic-display human-machine interfaces driven through the PMP port. Design consideration: the T-suffix indicates Tape-and-Reel delivery; ensure your pick-and-place supports 9x9 mm QFN land patterns with exposed thermal pad, and plan decoupling of the multiple VDD/VSS pin pairs per Microchip layout guidelines. This page synthesizes distributor availability data, pin-compatible alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC202-E/MM - 16-bit 60 MIPS DSC, 512KB Flash | Microchip
DSPIC33EP512MC202-E/MM

DSPIC33EP512MC202-E/MM - 16-bit 60 MIPS DSC, 512KB Flash | Microchip

The Microchip DSPIC33EP512MC202-E/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC family, delivering 60 MIPS of computation with 512 KB (170K x 24) of Flash program memory and 48 KB of RAM in a 28-pin QFN-S (6x6 mm) package with an exposed thermal pad, rated for -40C to +125C operation. What is a digital signal controller? A DSC combines a microcontroller's deterministic peripherals and interrupt architecture with a digital signal processor's single-cycle MAC and DSP pipeline, occupying the design tier between a 16-bit MCU and a discrete DSP. In the semiconductor hierarchy a DSC sits within microcontrollers -> 16-bit MCUs -> DSP-enhanced MCUs, with motor-control and power-conversion as its two flagship applications. The dsPIC33E generation specifically targets precision closed-loop control where high-resolution PWM, on-chip analog front ends, and rotor-position feedback all converge in a single chip. Key features include a 60 MIPS dsPIC DSC core with 24-bit instruction word and dual-operand fetch, three pairs of complementary MCPWM outputs with programmable dead time and 7.14 ns PWM resolution, a quadrature encoder interface (QEI) for rotor position sensing, integrated operational amplifiers and analog comparators that absorb the analog front end of current-sense loops, a Peripheral Trigger Generator (PTG) that sequences ADC and PWM events without CPU intervention, plus 4 KB of EEPROM-like data Flash and 12-bit ADC with 1.1 Msps throughput. The QFN-S package's central exposed pad carries thermal dissipation and the ground reference. Architecturally, the part operates from 3.0 V to 3.6 V (3.3 V nominal), uses single-cycle multiply-accumulate for DSP kernels, and supports both ICSP and JTAG programming along with self-programming for field firmware updates. AEC-Q100 grade-1 thermal range (-40C to +125C) enables under-hood and industrial use. Typical applications include field-oriented control of PMSM and BLDC motors, digital PFC and LLC converters, UPS inverters, solar microinverters, and automotive auxiliary motor drives. Design consideration: a 3.3 V LDO with tight tolerance is mandatory because the core voltage window is narrow; the QFN's exposed pad must be soldered to a continuous ground pour that doubles as a thermal path. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33EP MC family, and practical design notes that complement - not replace - the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC202-E/SP - 16-bit 60 MIPS DSC, 512KB Flash | Microchip
DSPIC33EP512MC202-E/SP

DSPIC33EP512MC202-E/SP - 16-bit 60 MIPS DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC202-E/SP is a 16-bit digital signal controller (DSC) from the dsPIC33EP family with a 60 MIPS dsPIC33E core, 512KB (170K x 24) of Flash program memory, 48KB of RAM, and an extended-temperature -40C to +125C rating in a 28-pin SPDIP through-hole package. A digital signal controller combines the compute architecture of a microcontroller with DSP engine features such as multiply-accumulate instructions, dual data fetch, and modulo/bit-reversed addressing. Within the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs and below full DSPs, offering deterministic real-time control plus math acceleration in one chip - the reason dsPIC33E devices dominate precision motor-control boards. Key features include the 16-bit dsPIC33E core with DSP and enhanced peripherals, 512KB self-programmable Flash with ECC, 48KB RAM, multiple MCPWM (motor-control PWM) modules, quadrature encoder interface (QEI), and wide 3V to 3.6V operation. The E-grade temperature suffix qualifies the part for -40C to +125C environments, and the device is listed as AEC-Q100 automotive capable per distributor parametric data. The architecture integrates a fast interrupt system, DMA, and an on-chip FRC oscillator, allowing single-chip designs for field-oriented-control (FOC) motor drives. The 24-bit instruction word improves code density versus 8-bit PICs, while hardware DSP support accelerates Clarke/Park transforms and PID loops. Typical applications include brushless DC and PMSM motor control, switched-mode power supplies, automotive body and engine-adjacent modules, and industrial automation nodes. The SPDIP package suits through-hole prototyping and serviceable industrial boards. Design consideration: the device requires a VCAP/VDDCORE capacitor on pin 27 for the internal 2.5V core regulator; place a low-ESR 10uF-class capacitor close to the pin per the Microchip datasheet. This page synthesizes distributor pricing, drop-in family alternatives, pinout detail, and design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC202-H/SO - 16-bit 60MIPS DSC 512KB | Microchip
DSPIC33EP512MC202-H/SO

DSPIC33EP512MC202-H/SO - 16-bit 60MIPS DSC 512KB | Microchip

The Microchip Technology DSPIC33EP512MC202-H/SO is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS from 512 KB (170K x 24) of Flash program memory and 48 KB of RAM, housed in a 28-pin SOIC package and qualified to AEC-Q100 for automotive use (-H temperature grade). A digital signal controller combines the compute architecture of a microcontroller with DSP-grade math acceleration in a single core. In the power-management hierarchy, the dsPIC33E family sits at the top of Microchip's 16-bit controller line, integrating an enhanced DSP engine, high-speed MCPWM peripherals, a quadrature encoder interface (QEI), on-chip op-amps and comparators - the full analog front end needed for closed-loop power conversion and motor control. Key features include a 16-bit RISC core with DSP instruction extensions, 512 KB self-programmable Flash with in-circuit and in-application programming, dual program breakpoints and trace, and an IEEE 1149.2-compatible JTAG boundary scan. Two pairs of PGECx/PGEDx pins support ICSP programming and debugging with any Microchip debugger. The MCPWM module generates complementary high-speed PWM outputs with dead-time control for BLDC, PMSM, ACIM and stepper motors, while the QEI decodes incremental encoder feedback directly in hardware. Integrated op-amps and comparators condition current-shunt signals without external amplifiers, reducing BOM cost and board area. Typical applications include precision motor control (FOC and trapezoidal drives), digital power supplies and PFC stages, automotive auxiliary systems requiring AEC-Q100 qualification, and industrial automation sensing nodes. The 3.3 V supply rail simplifies integration with modern automotive and industrial logic. Design consideration: choose the -H/SO grade for 125C ambient environments; the pin-compatible -I/SO variant covers -40C to +85C industrial use at lower cost. Verify that 28-pin GPIO and DMA channel counts suffice before migrating from larger dsPIC33EP packages. This page synthesizes distributor pricing context, drop-in alternatives within the dsPIC33EP MC202 family, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC202-I/SP - 16-bit DSC 70 MIPS 512KB Flash | Microchip
DSPIC33EP512MC202-I/SP

DSPIC33EP512MC202-I/SP - 16-bit DSC 70 MIPS 512KB Flash | Microchip

The Microchip DSPIC33EP512MC202-I/SP is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering 70 MIPS performance, 512KB (170K x 24) of Flash program memory, and 48KB of RAM, housed in a 28-pin SPDIP through-hole package rated for industrial temperatures. A digital signal controller combines the computational architecture of a microcontroller with the DSP capability of a digital signal processor. In the product hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs: it executes a modified Harvard 16-bit core with DSP engine extensions (40-bit accumulator, single-cycle MAC, modulo and bit-reversed addressing), making it a power-management-class device for control loops that need both decision logic and fast arithmetic. Key features include the 70 MIPS dsPIC33E core, up to 85 general-purpose I/O-capable pins on this 28-pin variant, a high-speed MCPWM module purpose-built for motor control, QEI quadrature encoder interface support, and multiple UART/SPI/I2C serial channels. Per Mouser, the device integrates '16B DSC 512KB Flash 48KB RAM MCPWM QEI' resources, and per DigiKey it is classified as a dsPIC 33EP Microcontroller IC, 16-Bit, 70 MIPs, 512KB FLASH, 28-SPDIP. The dsPIC33EP architecture includes an internal fast RC oscillator with PLL for flexible clocking up to 140 MIPS-equivalent internal instruction rates, a 3.0V to 3.6V operating supply, and in-circuit serial programming (ICSP) via any PGECx/PGEDx pin pair, which simplifies field upgrades through the MPLAB Snap or ICD programmers. Typical applications are precision motor control (BLDC, PMSM, stepper), digital power supplies (PFC, LLC controllers), industrial sensing and instrumentation, and embedded audio/conditioning signal chains where PWM precision plus DSP math are required in one chip. Design consideration: keep the VCAP/VDDCORE pin capacitor per the datasheet recommendation and pair any PGECx pin with the matching PGEDx pin when wiring ICSP, since pairs cannot be mixed. This page synthesizes distributor pricing, same-footprint drop-in memory variants, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single citable reference.

Cotação Contato
DSPIC33EP512MC202T-E/MM - 60 MIPS 16-bit DSC 512KB Flash | Microchip
DSPIC33EP512MC202T-E/MM

DSPIC33EP512MC202T-E/MM - 60 MIPS 16-bit DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC202T-E/MM is a 16-bit digital signal controller (DSC) delivering up to 60 MIPS from its dsPIC33EP core, with 512KB (170K x 24) of FLASH program memory, 24KB of RAM, and Motor Control PWM peripherals, housed in a 28-pin QFN-S (6x6 mm) package with exposed thermal pad. A digital signal controller combines the compute power of a DSP (single-cycle MAC, DSP instruction set, hardware multipliers) with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, DSCs occupy the top tier of the dsPIC33 family, positioned as microcontroller units (MCUs) optimized for closed-loop control loops such as field-oriented motor control and digital power conversion. Key features include the 16-bit dsPIC core at 60 MIPS, 512KB self-programming FLASH, DMA controller for peripheral-to-memory transfers, Motor Control PWM (MCPWM) with complementary outputs and dead-time insertion, quadrature encoder interface (QEI), input capture/output compare channels, and integrated op-amps and comparators that reduce external BOM cost in analog front ends. The dsPIC33EP architecture adds a user-programmable PTG (Pulse Train Generator), watchdog timer, power-on reset, and in-circuit/in-application programming with JTAG boundary scan (IEEE 1149.2 compatible) for production test. Two program and two complex data breakpoints support real-time debugging via the standard Microchip debugger ecosystem (PICkit, ICD, REAL ICE). Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies (PFC, LLC), solar inverters, and industrial sensor interfaces. The MCPWM and QEI peripherals are purpose-built for precision motor control where 16-bit DSP math executes each control loop within microseconds. Design consideration: the extended-temperature E suffix (-40C to +125C) is essential for automotive bays and industrial enclosures; derate maximum MIPS versus junction temperature per the manufacturer datasheet, and place low-ESR decoupling on all VDD pairs of the QFN exposed pad. This page synthesizes distributor pricing, drop-in alternatives, pinout, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC202T-I/SO - 16-bit 70 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512MC202T-I/SO

DSPIC33EP512MC202T-I/SO - 16-bit 70 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC202T-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC (Motor Control) family, delivering up to 70 MIPS performance from its dsPIC33E core, with 512KB (170K x 24) of FLASH program memory, housed in a 28-pin SOIC (SO) package with industrial temperature rating (-40C to +85C). A digital signal controller combines the computational architecture of a microcontroller with the multiply-accumulate DSP engine of a digital signal processor. Within the power management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for control loops that need deterministic, high-rate execution, making dsPIC33EP devices a common choice where firmware-driven precision motor control, digital power conversion, and sensor processing converge in a single chip. Key features include the 70 MIPS dsPIC33E core with integrated DSP engine, 512KB self-programmable FLASH with ECC, multiple UART/SPI/I2C communication peripherals, high-speed 12-bit ADC, and the MC family's dedicated motor-control PWM peripherals. In-circuit serial programming (ICSP) and in-application programming simplify field updates, and JTAG/IEEE 1149.2 boundary-scan support aids board-level test. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with two program and two complex data breakpoints, plus DSP instructions (MAC, dual fetch) that accelerate control-loop math such as Clarke/Park transforms in FOC motor drives. Peripherals are clocked independently, allowing ADC sampling and PWM updates to run without CPU intervention. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies (LLC, totem-pole PFC), and industrial sensing nodes that combine fast acquisition with rich communications. The MC-family PWM and ADC peripherals are purpose-built for these closed-loop, time-critical topologies. Design consideration: use a matched PGECx/PGEDx pair for ICSP (for example PGEC2 with PGED2); mixing pins from different pairs will prevent programming. This page adds information gain beyond the datasheet: verified drop-in alternatives, cross-family comparisons, and practical design notes synthesized from distributor and manufacturer data.

Cotação Contato
DSPIC33EP512MC204-E/PT - 16-bit DSC 512KB Flash 60 MIPS | Microchip
DSPIC33EP512MC204-E/PT

DSPIC33EP512MC204-E/PT - 16-bit DSC 512KB Flash 60 MIPS | Microchip

The Microchip Technology DSPIC33EP512MC204-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family featuring 512 KB (170K x 24) of Flash memory, 48 KB of RAM, and a dsPIC DSC core running at 60 MIPS (60 MHz), housed in a 44-pin TQFP (10x10 mm) package with extended temperature operation and AEC-Q100 automotive qualification. A digital signal controller combines the computational throughput of a microcontroller with the signal-processing capability of a DSP. Within the power management hierarchy of embedded systems, a DSC such as the dsPIC33EP512MC204 sits above general-purpose MCUs for control-loop-intensive tasks, providing single-cycle multiply-accumulate (MAC) DSP instructions alongside deterministic interrupt latency that real-time closed-loop control demands. Key differentiating features include the Motor Control PWM (MCPWM) module for multi-phase inverter drive, a Quadrature Encoder Interface (QEI) for position feedback, and integrated analog: on-chip operational amplifiers and comparators that reduce external component count in motor-control front ends. The 512 KB Flash supports complex field-oriented control (FOC) firmware with headroom for OTA-style field updates. Architecturally, the dsPIC33E core is a modified Harvard architecture with a 16-bit data path, 24-bit instruction words, and a pipelined execution unit. In-circuit serial programming (ICSP) is supported through any paired PGECx/PGEDx pin pair, and all VDD/VSS pairs must be connected during programming. Typical applications include precision brushless DC and PMSM motor control, industrial automation drives, automotive auxiliary motor systems (the -E suffix designates AEC-Q100 automotive-grade screening), and power conversion such as PFC and digital UPS stages. When designing, remember the core runs from a 3.3 V supply, and the 60 MIPS rating requires the correct oscillator configuration and PLL settings; consult the oscillator section of the manufacturer datasheet. This page synthesizes drop-in same-family alternatives, parametric comparisons, and engineering design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC204-E/TL - 60 MIPS 512KB DSC | Microchip
DSPIC33EP512MC204-E/TL

DSPIC33EP512MC204-E/TL - 60 MIPS 512KB DSC | Microchip

The Microchip Technology DSPIC33EP512MC204-E/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance, 512KB (170K x 24) of Flash program memory, and 48KB of RAM in a 44-pin VTLA (6x6 mm) QFN package with exposed pad. The extended-temperature E suffix is qualified to AEC-Q100 for automotive use, operating from -40C to +125C. A digital signal controller combines the compute architecture of a microcontroller with DSP capability on a single die. In the power-management hierarchy of embedded systems, a DSC such as this sits at the node between general-purpose MCUs and standalone DSPs: it runs real-time control loops (current, speed, position) while executing filtering and transform algorithms on-chip, eliminating a second processor. Key features include the dsPIC33E core with DSP engine and hardware multiply-accumulate, dedicated Motor Control PWM (MCPWM) peripherals, Quadrature Encoder Interface (QEI) inputs, integrated operational amplifiers and comparators, 35 programmable I/O pins, and 12 timers/counters. The 3.3V supply (up to 3.6V maximum) suits modern low-voltage designs. Architecturally, the dsPIC33EP core executes most instructions in a single cycle at 60 MIPS, with X and Y data memories enabling simultaneous operand fetches for MAC-class instructions. The MCPWM module generates complementary or independent PWM channels with dead-time insertion, directly driving three-phase inverter bridges for field-oriented control (FOC) of PMSM and BLDC motors. Typical applications are precision motor control (servo drives, e-bike controllers, industrial pumps), digital power supplies (PFC, LLC converters), and embedded sensing systems that benefit from the QEI plus op-amp/comparator peripherals. Design consideration: the 6x6 QFN exposed pad must be soldered to a ground pour with thermal vias; also budget Flash carefully - the 512KB density is shared across one partition with no dual-partition boot swapping on this device. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33EP family, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC204-H/ML - 16-Bit 60 MIPS DSC, 512KB Flash | Microchip
DSPIC33EP512MC204-H/ML

DSPIC33EP512MC204-H/ML - 16-Bit 60 MIPS DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC204-H/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering up to 60 MIPS performance, 512KB (170K x 24) of Flash program memory and 48KB of RAM, housed in a 44-pin QFN (8x8 mm) surface-mount package with exposed pad. According to the DigiKey product listing, this dsPIC33EP 33EP-series device integrates a DSP-enhanced PIC core for high-performance embedded control. A digital signal controller combines the computational architecture of a microcontroller with DSP capabilities such as single-cycle multiply-accumulate and hardware divide, placing it in the product hierarchy: DSC -> 16-bit microcontroller -> embedded processor -> semiconductor. This makes the dsPIC33EP family particularly suited to control loops that need both deterministic MCU-style interrupt handling and DSP-style math, such as field-oriented motor control and digital power conversion. Key features include 35 general-purpose I/O pins, 12 timers/counters, an operating supply from 3V, and a maximum operating temperature of 150C for this -H grade variant. The MCPWM (motor control PWM) module and QEI (quadrature encoder interface) peripherals identified in distributor data directly support precision motion applications without external logic. On the technical side, the dsPIC33E core executes an enhanced 16-bit instruction set with DSP instructions, and the 44-QFN 8x8 mm exposed-pad package improves thermal dissipation and ground integrity for high-frequency switching designs. Multiple PGECx/PGEDx pin pairs support in-circuit serial programming (ICSP) and debugging - any pair may be used, but ICSPCLK and ICSPDAT must be taken from the matching pair, per Microchip programming documentation. Typical applications include brushless DC and PMSM motor control, digital power supplies (PFC, LLC), industrial automation sensors, and audio or sensing signal processing where the DSP engine accelerates filtering and transform computations. A key design consideration: all VDD and VSS pins must be connected during programming and operation, and decoupling capacitors should be placed directly at each supply pin to ensure the 60 MIPS core runs glitch-free. This page synthesizes distributor pricing links, drop-in same-family alternatives, application guidance, and design notes not found in the manufacturer datasheet, with all data verified as of 2026-09-25.

Cotação Contato
DSPIC33EP512MC204-I/ML - 16-bit 70 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512MC204-I/ML

DSPIC33EP512MC204-I/ML - 16-bit 70 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC204-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering 70 MIPS performance, 512KB (170K x 24) of FLASH program memory, and 48KB of RAM, housed in a 44-pin QFN (8x8 mm, ML) package with exposed pad, operating at 3.3V across the industrial -40C to +85C temperature range. A digital signal controller combines the compute architecture of a microcontroller with the mathematical throughput of a DSP. In the product hierarchy, the dsPIC33EP sits within the broader class of 16-bit microcontrollers and digital signal controllers, occupying the space between general-purpose MCUs and dedicated DSPs. Its single-cycle MAC, DSP engine, and hardware multiply-accumulate make it the de facto choice for closed-loop control systems that need both decision logic and fast arithmetic in one chip. Key features include the 70 MIPS dsPIC33E core, dual FLASH partitions supporting live updates, motor control PWM (MCPWM) peripherals with complementary outputs and dead-time insertion, quadrature encoder interface (QEI) inputs, and integrated analog: op-amps, comparators, and a high-speed 10/12-bit ADC. The peripheral mix is purpose-built for precision motor control - sensorless BLDC, PMSM FOC, and stepper drives - where PWM resolution and ADC sampling synchronization dominate system accuracy. Technically, the dsPIC33EP core uses an enhanced Harvard architecture with a 24-bit instruction word, hardware DSP multiply-accumulate, and 40-bit wide accumulators. The MCPWM module provides up to 8 PWM outputs with edge- and center-aligned modes, while the QEI interfaces directly to optical encoders for velocity and position feedback. Multiple PGECx/PGEDx pin pairs support In-Circuit Serial Programming (ICSP) and debugging. Typical applications include brushless DC and PMSM motor drives, digital power supplies (PFC, LLC), UPS systems, and industrial automation nodes requiring deterministic control loops at 20-70 kHz PWM frequencies. Design consideration: all VDD/VSS pairs must be decoupled with 0.1uF ceramics placed close to the exposed-pad QFN, and the exposed pad must be soldered to a grounded copper pour for thermal and signal-integrity reasons; ICSP requires matched PGECx/PGEDx pairs. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with selection and sourcing information in one place.

Cotação Contato
DSPIC33EP512MC204-I/TL - 16-bit DSC 70 MIPS 512KB Flash | Microchip
DSPIC33EP512MC204-I/TL

DSPIC33EP512MC204-I/TL - 16-bit DSC 70 MIPS 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC204-I/TL is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 512 KB (170K x 24) FLASH program memory, 48 KB RAM, and a 44-pin VTLA (6x6 mm) surface-mount package. It is part of the dsPIC33EP512MC204 family targeted at high-performance, precision motor control. A digital signal controller is a hybrid device that combines the computational throughput of a digital signal processor with the deterministic, interrupt-driven behavior of a microcontroller. In the product hierarchy, the dsPIC33EP family sits between general-purpose 16-bit MCUs (PIC24) and dedicated DSPs, making it well suited to embedded control loops that need fast multiply-accumulate operations, such as field-oriented control of PMSM and BLDC motors. Key features include a 70 MIPS dsPIC DSC core with DSP instruction extensions, a clock frequency of up to 60 MHz, integrated MCPWM (motor control PWM) peripherals, QEI quadrature encoder interfaces, on-chip operational amplifiers, and analog comparators. These motor-centric peripherals allow closed-loop current and speed control with minimal external circuitry, reducing board area and BOM cost. Technically, the device integrates 4 DMA channels and 5 timers (per distributor data), dual PGECx/PGEDx pairs for In-Circuit Serial Programming (ICSP) via tools such as MPLAB SNAP, and operates from a 3.0V to 3.6V supply over the industrial temperature range of -40C to +85C (I suffix). The CMOS process delivers low power operation for embedded industrial control. Typical applications include brushless DC and permanent magnet synchronous motor drives, digital power supplies (PFC, LLC), inverters, and industrial automation systems where encoder feedback and precision PWM are required. The QEI input pairs naturally with servo and stepper positioning systems. Design consideration: all VSS and VDD pins must be connected, and PGECx/PGEDx must be used as matched pairs for programming - for example, PGEC2 with PGED2. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC204T-E/ML - 16-bit 512KB DSC 60MIPS | Microchip
DSPIC33EP512MC204T-E/ML

DSPIC33EP512MC204T-E/ML - 16-bit 512KB DSC 60MIPS | Microchip

The Microchip Technology DSPIC33EP512MC204T-E/ML is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS performance, 512KB of FLASH program memory (170K x 24), and integrated motor-control peripherals, housed in a 44-pin VQFN (ML, 8x8 mm) exposed-pad package. It is an AEC-Q100 qualified automotive-grade part rated from -40C to +125C and supplied in tape-and-reel packing for high-volume assembly. A digital signal controller combines the compute architecture of a microcontroller with the math acceleration of a digital signal processor. In the power-management hierarchy, the dsPIC33EP family sits within Microchip's 16-bit MCU/DSC portfolio, where a single core executes control loops, communication stacks, and DSP routines - making DSCs the de-facto choice for closed-loop motor control, digital power conversion, and sensing systems that need deterministic, cycle-accurate behavior. Key features of this device include a 16-bit dsPIC core with DSP engine and single-cycle MAC, dedicated high-speed MCPWM (motor control PWM) modules with complementary outputs and dead-time insertion, quadrature encoder interface (QEI) inputs for position feedback, three integrated operational amplifiers, four analog comparators, and a CTMU (charge time measurement unit) for capacitive-touch or precision timing measurement. Four DMA channels offload data movement from the core, and five 16-bit timers support complex time bases. Technically, the dsPIC33EP architecture runs from a 3.0V to 3.6V single supply, with an internal PLL allowing the core to operate at 60 MIPS (some family documentation cites a 70 MIPS-capable core clock depending on device grading). CMOS process technology keeps dynamic power low, while the 8x8 mm VQFN exposed pad provides a low thermal resistance path to the PCB copper pour - essential when driving power stages through the PWM outputs in compact automotive ECUs. Typical applications include BLDC and PMSM motor control with field-oriented control (FOC), automotive auxiliary actuators and pumps, digital power supplies and PFC stages, and industrial sensor signal conditioning using the on-chip op amps and CTMU. For design, budget decoupling of at least 100 nF per VDD pin plus bulk capacitance at the 3.3V rail, and route PWM outputs away from analog inputs feeding the op amps to protect the 10/12-bit ADC signal path from switching noise. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC204T-E/TL - 16-bit 60 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512MC204T-E/TL

DSPIC33EP512MC204T-E/TL - 16-bit 60 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC204T-E/TL is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS performance with 512KB (170K x 24) of FLASH program memory, 48KB of RAM, and integrated motor-control peripherals, housed in a 44-pin VTLA (6x6 mm) exposed-pad QFN package rated for the automotive -40C to +125C temperature range. A digital signal controller combines the computational architecture of a microcontroller with the DSP engine of a digital signal processor. In the system hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs: it executes real-time control loops and math-intensive filtering (multiply-accumulate, division, bit-reversal) while also handling general I/O, communication, and state-machine tasks, making it the core of a power management or motor drive subsystem. Key features include a 16-bit dsPIC core with DSP instruction extensions, on-chip MCPWM (motor control PWM) hardware, a Quadrature Encoder Interface (QEI) for direct encoder feedback, three integrated operational amplifiers and four comparators that reduce external analog component count, and a CTMU (Charge Time Measurement Unit) for capacitive touch and precise timing measurement. Connectivity spans I2C, SPI, UART/USART, IrDA, and LINbus for automotive and industrial networks. Architecturally, the 33EP core achieves single-cycle MAC operations with a high-performance pipelined fetch, allowing deterministic interrupt latency for FOC (field-oriented control) motor algorithms. The 512KB FLASH array supports in-circuit self-programming, while the 48KB RAM accommodates control-loop variables, communication buffers, and firmware tables without external memory. Typical applications include brushless DC and PMSM motor drives, digital power supplies (PFC, LLC), automotive body and powertrain auxiliary modules leveraging AEC-Q100 qualification, and industrial automation nodes requiring encoder feedback. Design consideration: the 6x6 mm VTLA exposed pad must be soldered to a grounded thermal via array on the PCB; omitting this connection degrades both thermal dissipation and signal-integrity reference. Supply the core and I/O rails from a clean 3.3V source with decoupling per the manufacturer power distribution guidance. This page synthesizes distributor stock data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-25.

Cotação Contato
DSPIC33EP512MC204T-I/PT - 70 MIPS 16-bit DSC 512KB | Microchip
DSPIC33EP512MC204T-I/PT

DSPIC33EP512MC204T-I/PT - 70 MIPS 16-bit DSC 512KB | Microchip

The Microchip Technology DSPIC33EP512MC204T-I/PT is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS core performance with 512KB (170K x 24) of Flash program memory and 48KB of RAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package rated for -40C to +85C industrial operation. A digital signal controller is a hybrid device that combines the control peripherals and interrupt architecture of a microcontroller with the multiply-accumulate DSP engine of a digital signal processor. Within the power management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33E family a popular choice for real-time control loops where both computation and deterministic I/O are required. Key features of this device include the enhanced dsPIC33EP core with DSP instruction support, motor-control PWM (MCPWM) peripherals for inverter and BLDC control, quadrature encoder interface (QEI) inputs for position feedback, on-chip operational amplifiers and analog comparators that reduce external component count, and direct memory access (DMA) channels that offload data movement from the CPU. The 512KB Flash supports in-circuit self-programming, and 48KB of RAM provides ample buffering for control algorithms and communication stacks. Architecturally, the dsPIC33EP core executes most instructions in a single cycle at 70 MIPS, with dual 40-bit accumulators, 17-bit x 17-bit single-cycle MAC, and hardware modulo and bit-reversed addressing for FFT routines. Clock operation is nominally referenced at 60 MHz in system designs, while the core performance envelope reaches 70 MIPS per Microchip family documentation. The CMOS process delivers low active power in the 3.0V to 3.6V supply range. Typical applications include precision BLDC and PMSM motor control with field-oriented control algorithms, digital power supplies and solar inverters, sensorless industrial drives, and general embedded control where DSP filtering (IIR/FIR) is required. The QEI plus MCPWM combination makes this exact MPN a natural fit for servo and positioning systems. When designing with this device, budget the 3.3V rail carefully: all I/O and core power derive from a single 3.0V to 3.6V domain, so sequencing and decoupling (100 nF per VDD pin) are essential for reliable POR behavior. Verify thermal margins in sealed enclosures at 85C ambient. This page synthesizes verified distributor data, drop-in family alternatives, and practical design notes not consolidated in the manufacturer product listing.

Cotação Contato
DSPIC33EP512MC204T-I/TL - 16-bit DSC 70 MIPS 512KB | Microchip
DSPIC33EP512MC204T-I/TL

DSPIC33EP512MC204T-I/TL - 16-bit DSC 70 MIPS 512KB | Microchip

The Microchip Technology DSPIC33EP512MC204T-I/TL is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS core performance, 512 KB (170K x 24) of FLASH program memory, and 48 KB of RAM, housed in a 44-pin VTLA (TQFP-44, 6x6 mm) surface-mount package with exposed features and Tape & Reel (T) delivery. A digital signal controller is a hybrid device that combines the deterministic control flow of a 16-bit microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. Within the power management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, making it the preferred controller class for closed-loop motor control, digital power conversion, and sensor signal processing where both control bandwidth and math throughput matter. Key differentiating features include the 70 MIPS dsPIC33E core with integrated DSP engine, dedicated Motor Control PWM (MCPWM) peripherals, Quadrature Encoder Interface (QEI) inputs, and on-chip operational amplifiers and comparators that reduce external component count in motor-drive designs. The device operates from a 3.3V supply across the industrial -40C to +85C temperature range (I suffix). Architecturally, the dsPIC33EP family pairs the 16-bit pipeline core with a DSP engine supporting single-cycle MAC operations, plus extensive peripheral scaling for FOCS (field-oriented control) motor algorithms. The SR provided by RS Components lists 60 MHz operation, QEI, MCPWM, op-amps, and comparators as headline peripherals, which aligns with Microchip's positioning of the dsPIC33EP MC series for precision motor control systems that are more energy efficient. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies (PFC, LLC), industrial automation nodes, and embedded signal-processing systems. The integrated MCPWM and QEI make it a one-chip solution for servo and e-bike motor controllers. Design consideration: because the part is a 3.3V device, level-shifting is required for 5V legacy peripherals; the 6x6 mm TQFP-44 also needs a solid ground plane for the exposed thermal area to manage switching-noise from the PWM stage. This page synthesizes distributor pricing, drop-in alternatives, design notes, and application guidance not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33EP512MC206-E/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip
DSPIC33EP512MC206-E/PT

DSPIC33EP512MC206-E/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC206-E/PT is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 512 KB of flash program memory and 48 KB of RAM, housed in a 64-pin TQFP (10x10 mm) package rated for -40C to +125C operation. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for math-intensive control loops: it pairs a DSP engine with hardware multipliers and accumulators to execute precision motor control, digital power conversion, and sensor-fusion algorithms in real time. Key features of the DSPIC33EP512MC206 include the dsPIC33E CPU with integrated DSP instruction support, a dedicated motor control PWM (MCPWM) peripheral, and a quadrature encoder interface (QEI) for closed-loop servo feedback, as identified in Microchip's product data. The extended-temperature (-E) suffix qualifies the device for -40C to +125C ambient operation, and the part is listed in the dsPIC33EP series with AEC-Q100 automotive qualification references in distributor data. Architecturally, the device executes up to 70 million instructions per second from flash, supporting single-cycle MAC and DSP-style addressing that is essential for field-oriented control (FOC) of PMSM and BLDC motors. In-circuit and in-application programming (ICSP/ICAP), IEEE 1149.2-compatible JTAG boundary scan, and multiple PGECx/PGEDx debug channel pairs simplify production programming and debugging. Typical applications include precision motor control (BLDC, PMSM, ACIM), digital power supplies and solar inverters, and automotive/industrial motion subsystems where the MCPWM, QEI, and extended temperature range align with the system requirements. When designing with this device, connect all VDD and VSS pairs and remember that any PGECx/PGEDx pair can be used for ICSP, but ICSPCLK and ICSPDAT must come from the same pair. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes beyond what the manufacturer datasheet provides.

Cotação Contato
DSPIC33EP512MC206-H/MR - 16-bit 60 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512MC206-H/MR

DSPIC33EP512MC206-H/MR - 16-bit 60 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC206-H/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering 60 MIPS performance with 512KB (170K x 24) of FLASH program memory and 48KB (24K x 16) of RAM, housed in a 64-pin VQFN (9x9 mm) exposed-pad package. This automotive-qualified AEC-Q100 grade variant operates from 3.0V to 3.6V across -40C to +150C at up to 60 MIPS, targeting precision motor control and automotive embedded systems. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control-oriented architecture of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for real-time control loops, executing multiply-accumulate operations in hardware while retaining deterministic interrupt latency. The dsPIC33E family uses a modified Harvard architecture with a 16-bit-wide data path and 24-bit-wide instructions, optimized for C compiler efficiency. Key features include the dsPIC33E DSC core with 16x16 integer multiply and 32/16 divide operations, four DMA channels enabling data movement without CPU intervention, and motor-control peripherals including QEI (quadrature encoder interface), MCPWM (motor control PWM), on-chip operational amplifiers, and comparators as listed in distributor specifications. Twelve timers/counters and 53 programmable I/O pins provide extensive peripheral connectivity. The modified Harvard architecture fetches the next instruction while executing the current one, sustaining single-cycle MAC throughput essential for field-oriented control (FOC) of PMSM and BLDC motors. The -H/MR suffix denotes the automotive temperature grade (up to +150C ambient, derated to 60 MIPS) in the 64-VQFN exposed-pad package, with an industrial -I/MR variant rated to +85C at 70 MIPS. Typical applications include automotive electric power steering and pump motor control, industrial BLDC/PMSM servo drives, digital power supplies (PFC and LLC converters), and embedded sensing systems requiring DSP filtering alongside hard real-time control. Design consideration: at 3.3V supply and full-speed operation, ensure the exposed thermal pad is well-grounded to the PCB pour for heat dissipation and signal integrity, and budget the 3.0V to 3.6V operating window carefully against regulator tolerance. This page synthesizes distributor pricing references, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC206T-E/MR - 16-bit 70 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512MC206T-E/MR

DSPIC33EP512MC206T-E/MR - 16-bit 70 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC206T-E/MR is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS performance, 512 KB (170K x 24) of Flash program memory, and 48 KB of RAM, housed in a 64-pin VQFN (9x9 mm) exposed-pad package. A digital signal controller combines the deterministic interrupt behavior and peripheral set of a microcontroller with the math throughput of a DSP. Within the power-management hierarchy of embedded control, the dsPIC33E family sits above general-purpose PIC16/PIC18 MCUs and below application processors, offering a specialized motor-control ecosystem: the dsPIC33EP core executes DSP multiply-accumulate instructions and supports enhanced peripherals purpose-built for closed-loop control. Key features of the DSPIC33EP512MC206T-E/MR include the motor control PWM (MCPWM) module for complementary, dead-time-controlled drive outputs, a quadrature encoder interface (QEI) for rotor position feedback, integrated op amps and comparators that reduce external component count in current-sense loops, and connectivity through I2C, SPI, UART/USART, IrDA and LINbus. Peripherals also include 4 DMA channels, 5 timers, and a Peripheral Trigger Generator (PTG), plus JTAG boundary scan per IEEE 1149.2 for test coverage. The -E suffix indicates the extended automotive-grade temperature option and the device is AEC-Q100 qualified, supporting -40C to +125C ambient operation. The tape-and-reel (T) ordering option suits automated SMT assembly. The 3.3V supply domain and 64-VFQFN exposed pad give good thermal and ground performance for high-current PWM switching environments. Typical applications include precision motor control (BLDC, PMSM, ACIM) for drives, servo systems, e-mobility and industrial automation, digital power supplies and power factor correction, and embedded control systems requiring DSP-class filtering on a 16-bit MCU. Design consideration: verify the flash/RAM variant you need before layout - the 64-pin MC206 members share one footprint across 64 KB to 512 KB flash, enabling later memory resizing without PCB rework. This page synthesizes distributor pricing, drop-in same-footprint alternatives, and practical design notes not found in the manufacturer datasheet. Prices as of 2026-09-25.

Cotação Contato
DSPIC33EP512MC206T-E/PT - 16-bit 60 MIPs DSC 512KB | Microchip
DSPIC33EP512MC206T-E/PT

DSPIC33EP512MC206T-E/PT - 16-bit 60 MIPs DSC 512KB | Microchip

The Microchip Technology DSPIC33EP512MC206T-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering 60 MIPs performance, 512KB (170K x 24) FLASH program memory, and 24KB (24K x 16) RAM, housed in a 64-pin TQFP (10x10 mm) package. It operates from a 3.3V supply and provides 53 I/O pins. A digital signal controller combines the compute architecture of a microcontroller with DSP-capable instruction execution. In the system hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it retains MCU-style peripherals, interrupts, and ease of use while adding hardware multiply-accumulate, DSP engine, and motor-control PWM peripherals. The dsPIC33EP family is Microchip's 16-bit DSC generation optimized for precision digital power and motor control. Key features of this part include the 60 MIPs dsPIC core with integrated DSP engine, 512KB self-programmable FLASH, peripherals such as I2C, SPI, UART/USART, IrDA, LINbus, quadrature encoder interface (QEI), and motor-control PWM (MCPWM), plus on-chip op-amps, comparators, and a Peripheral Trigger Generator (PTG). The E suffix denotes the extended temperature range, and the device is AEC-Q100 qualified for automotive use. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with 24-bit instruction words and 16-bit data paths. Hardware DSP instructions accelerate filtering and control-loop math, while the MCPWM module with complementary outputs, dead-time insertion, and fault inputs directly drives three-phase inverters for FOC-based motor control. Typical applications include brushless DC and PMSM motor control, digital power supplies (PFC, LLC), automotive auxiliaries, industrial automation nodes, and embedded control systems requiring deterministic DSP-class math in a compact 64-TQFP footprint. A key design consideration is supply integrity: decouple the 3.3V rail with low-ESR ceramics close to each VDD pin and follow Microchip's layout guidance for the motor-control PWM outputs to minimize switching noise coupling. This page synthesizes verified distributor data, drop-in alternative analysis, AEO-optimized FAQs, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC502-E/SO - 16-bit 60 MIPS DSC, 512KB Flash | Microchip
DSPIC33EP512MC502-E/SO

DSPIC33EP512MC502-E/SO - 16-bit 60 MIPS DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC502-E/SO is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS from its dsPIC DSC core, with 512 KB (170K x 24) of Flash program memory, 48 KB of SRAM, and an extended-temperature (-40C to +125C) 28-pin SOIC package. A digital signal controller combines the periphery of a microcontroller (ADC, timers, UART, SPI, I2C) with the mathematical acceleration of a DSP (single-cycle MAC, DSP instruction set, barrel shifter) inside a single core. In the power-management hierarchy, the dsPIC33EP family sits between general-purpose MCUs and dedicated DSPs, targeting closed-loop systems such as digital power conversion and motor control where fast control-loop execution and rich analog integration matter more than raw compute throughput. Key features of this MC (motor control) variant include the Motor Control PWM (MCPWM) peripheral with complementary outputs and dead-time insertion, a Quadrature Encoder Interface (QEI) for direct encoder feedback, and on-chip analog integration with ADC inputs, comparators and input-op-amp capability as highlighted by distributors (Mouser lists MCPWM, QEI, op amps, comparators). The 512 KB self-programming Flash supports field firmware updates, while the 48 KB SRAM accommodates control histories and buffering. The dsPIC33EP core uses an enhanced 16-bit architecture with hardware DSP multiply-accumulate, providing deterministic execution for Proportional-Integral-Derivative loops running at switching frequencies used in digital power supplies. According to Microchip, the dsPIC33E family targets high-performance precision motor control systems that are more energy efficient and quieter, controlling brushless DC and permanent-magnet motors. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor drives, digital switched-mode power supplies (PFC, LLC), and embedded industrial control nodes requiring both encoder feedback and fast PWM generation. A key design consideration: select the correct supply pin budget and decouple VDD/VSS pairs with 0.1 uF ceramics placed at each pin pair, and confirm pin assignment against the manufacturer datasheet before layout. This page synthesizes distributor pricing, drop-in alternatives within the same 28-pin SOIC footprint, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC502-E/SP - 70MIPS DSC, 512KB Flash | Microchip
DSPIC33EP512MC502-E/SP

DSPIC33EP512MC502-E/SP - 70MIPS DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC502-E/SP is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 512 KB of Flash program memory and 48 KB of SRAM, housed in a 28-pin SPDIP (0.300 inch, 7.62 mm) through-hole package with extended temperature operation from -40C to +125C. A digital signal controller combines the computational architecture of a microcontroller with DSP capability: a modified Harvard 16-bit core executing single-cycle MAC and 40-bit accumulator operations, plus fast interrupts for tight control loops. DSCs sit between general-purpose MCUs and dedicated DSPs in the embedded hierarchy, making them the natural choice for closed-loop power and motion electronics. Key features include the 70 MIPS core clocked from internal PLL up to 60 MIPS Fcy-class operation, on-chip high-speed MCPWM module supporting complementary and center-aligned outputs, quadrature encoder interface (QEI) for motor feedback, a 10-bit/12-bit ADC with multiple sample-and-hold circuits, and dual PGEC/PGED pairs for in-circuit serial programming (ICSP). Architecturally, the dsPIC33EP generation integrates a hardware DSP engine (17-bit x 17-bit multiplier, dual 40-bit accumulators), a flexible peripheral pin select (PPS) scheme allowing digital peripherals to be remapped across RPx pins, and 3.3V operation across the full industrial and extended temperature ranges. The family is aimed at precision motor control for brushless DC (BLDC), permanent magnet synchronous (PMSM), AC induction and stepper machines. Typical applications include sensorless FOC motor drives, solar inverters and power factor correction stages, digital power supplies, and industrial automation nodes. The through-hole SPDIP package suits prototyping, breadboarding, and industrial equipment with socketed controllers. Design consideration: place a low-ESR capacitor on the VCAP pin for internal regulator stability, and use the dedicated PGEC/PGED pairs consistently for programming. This page synthesizes distributor availability, drop-in family alternatives, and design notes not found on the manufacturer product page.

Cotação Contato
DSPIC33EP512MC502-H/MM - 16-bit 60 MIPS Motor Control DSC | Microchip
DSPIC33EP512MC502-H/MM

DSPIC33EP512MC502-H/MM - 16-bit 60 MIPS Motor Control DSC | Microchip

The Microchip Technology DSPIC33EP512MC502-H/MM is a 16-bit Digital Signal Controller (DSC) delivering 60 MIPS (70 MHz) performance with 512 KB of Flash program memory and 48 KB of SRAM, housed in a 28-pin VQFN (QFN-S 6x6 mm) package with exposed pad. A Digital Signal Controller combines the computational throughput of a digital signal processor with the peripheral integration and deterministic interrupt behavior of a microcontroller. Within the power management IC and embedded control hierarchy, the dsPIC33EP family sits between general-purpose MCUs and full DSPs, making it the standard choice for real-time closed-loop control where both math throughput and rich peripherals are required. Key features of this device include the high-speed Motor Control PWM (MCPWM) module with complementary outputs and dead-time control, a quadrature encoder interface (QEI) for direct feedback from rotary encoders, two on-chip operational amplifiers, comparators, a 10/12-bit ADC, and a CAN 2.0B controller for networked systems. The core supports DSP instructions including barrel shifting, MAC operations, and modulo addressing, and includes 4 DMA channels and 5 timers. Architecturally, the dsPIC33EP512MC502 runs from a 3.0V to 3.6V supply with a 16-bit modified Harvard core that executes most instructions in a single cycle, with fixed-point DSP extensions accelerating control-loop mathematics such as PI/PID filters and field-oriented control transforms. The device is qualified to AEC-Q100 and targets automotive-grade temperature operation (-40 C rated H-temperature suffix). Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, power factor correction converters, digital UPS and inverter control, and automotive electromechanical actuators where QEI feedback and CAN networking are required. A key design consideration: the 6x6 mm QFN exposed pad must be soldered to a grounded copper pour for both thermal dissipation and signal integrity; the H suffix denotes automotive temperature rating - confirm your operating range matches this grade. ICSP programming requires using PGECx/PGEDx pin pairs together. This page synthesizes distributor pricing, same-footprint drop-in alternatives, and practical design guidance not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33EP512MC502-H/SP - 60 MIPS 16-bit DSC 512KB Flash | Microchip
DSPIC33EP512MC502-H/SP

DSPIC33EP512MC502-H/SP - 60 MIPS 16-bit DSC 512KB Flash | Microchip

The Microchip DSPIC33EP512MC502-H/SP is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC (Motor Control) family, delivering up to 60 MIPS performance with 512 KB (170K x 24) of Flash program memory and 48 KB of RAM, housed in a 28-pin SPDIP (SP, 0.300 inch / 7.62 mm) through-hole package. According to Microchip's product page, the dsPIC33E family features an enhanced dsPIC DSC core with integrated DSP engine and on-chip peripherals targeted at high-performance precision motor control. A digital signal controller combines the compute architecture of a microcontroller with the math acceleration of a DSP. Within the power-management hierarchy, a DSC sits at the top of the embedded control chain: MCU core -> DSP engine -> closed-loop control of power electronics such as brushless DC (BLDC) and permanent magnet synchronous motors (PMSM). The dsPIC33EP512MC502 extends this lineage with motor-control-specific peripherals. Key features include a 16-bit 60 MIPS core with DSP multiply-accumulate instructions, 512 KB self-programmable Flash with ECC, 48 KB RAM, motor control PWM (MCPWM) with complementary outputs and dead-time insertion, quadrature encoder interface (QEI) inputs for rotor position feedback, and multiple serial peripherals (UART, SPI, I2C) plus a 10-bit ADC for current and voltage sensing loops. Architecturally, the dsPIC33E core uses a modified Harvard pipeline with a 24-bit instruction word, hardware looping, and a 40-bit wide accumulator, allowing single-cycle MAC operations essential to field-oriented control (FOC) and other compute-intensive motor algorithms executed at servo-loop update rates. Typical applications include BLDC and PMSM motor drives, switched-mode power supplies (SMPS) and digital power converters, sensor-less FOC inverters, and embedded industrial control nodes that benefit from the through-hole 28-SPDIP footprint for prototyping and low-volume production. Design consideration: verify the -H temperature grade (0C to +70C per Microchip convention) matches your operating environment; the -I grade variant in the same package covers -40C to +85C for industrial deployments. This page synthesizes distributor listings, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet.

Cotação Contato