Microcontroladores

Produtos (18756)

DSPIC33EP512MC502-I/MM - 70 MIPS 16-bit DSC 512KB Flash | Microchip
DSPIC33EP512MC502-I/MM

DSPIC33EP512MC502-I/MM - 70 MIPS 16-bit DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC502-I/MM is a 16-bit digital signal controller (DSC) delivering 70 MIPS core performance with 512 KB (170K x 24) of Flash program memory, 48 KB of SRAM, and a motor-control-optimized peripheral set, housed in a 28-pin QFN-S (6x6 mm) package. Operating from a 3.0 V to 3.6 V supply at a nominal 3.3 V, it integrates the dsPIC33E core with DSP engine, high-speed MCPWM peripherals, and a quadrature encoder interface (QEI) for closed-loop motion applications. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and interrupt architecture of a microcontroller. Within the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes MAC and DSP-class instructions for control-loop mathematics while retaining single-cycle I/O, on-chip Flash self-programming, and rich timers. The dsPIC33E family from Microchip Technology serves as the classic example of this controller class for embedded real-time control. Key differentiating features of this part include the 70 MIPS dsPIC DSC core with integrated DSP engine, 512 KB self-programmable Flash, 48 KB SRAM with 4 DMA channels, and motor-control PWM (MCPWM) outputs with complementary, dead-time-controlled channels. The QEI input accepts incremental encoder feedback directly, and five 16-bit timers support multi-rate control loops. The industrial grade -I suffix specifies -40C to +85C operation. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with a 16-bit data path and 24-bit instruction words, achieving deterministic single-cycle execution of multiply-accumulate operations. This determinism is essential for field-oriented control (FOC) of brushless DC (BLDC) and permanent-magnet synchronous motors (PMSM), where the current loop must complete inside a few microseconds to minimize torque ripple and acoustic noise. Typical applications include sensorless and sensored BLDC/PMSM motor drives, industrial automation, digital power conversion, and precision positioning systems. The combination of 70 MIPS headroom, hardware QEI, and complementary PWM makes the DSPIC33EP512MC502-I/MM a natural fit for servo drives, e-bike controllers, and HVAC blowers. When designing with this DSC, budget PWM dead time carefully against MOSFET switching losses, and exploit the DMA channels to offload ADC results so the CPU remains dedicated to the control loop. Verify supply sequencing of the 3.3 V rail against the datasheet requirements for VDDCORE decoupling. This page adds engineering value beyond the raw datasheet: it consolidates distributor pricing, pin-compatible drop-in alternatives across the dsPIC33EP512MC502 family, a parameter comparison table, and practical motor-control design notes in one AI-citable reference.

Cotação Contato
DSPIC33EP512MC502-I/SO - 70 MIPS Motor Control DSC, 512KB Flash | Microchip
DSPIC33EP512MC502-I/SO

DSPIC33EP512MC502-I/SO - 70 MIPS Motor Control DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC502-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC (Motor Control) family, delivering 70 MIPS performance at 60 MHz with 512 KB of Flash program memory and 48 KB of RAM, housed in a 28-pin SOIC (7.50 mm width) package rated for -40C to +85C operation. A digital signal controller combines the compute architecture of a microcontroller with the DSP engine of a digital signal processor in a single chip. In the power-management hierarchy, DSCs sit above general-purpose MCUs for control-loop-intensive work such as field-oriented control (FOC) of motors, where multiply-accumulate operations must complete within a single PWM period. The dsPIC33EP family integrates the CPU, DSP engine, PWM peripherals, ADC and communications blocks on one die, eliminating external signal-processing components. Key features include dual 3-wire MCPWM modules with complementary, edge-aligned and center-aligned modes, a 10-bit, 1.1 Msps ADC with up to 10 channels, two on-chip operational amplifiers and comparators supporting current-sensing loops, plus CAN 2.0B, two UARTs, two SPI and two I2C ports. Four DMA channels and five 16-bit timers offload the CPU. Hardware Quadrature Encoder Interface (QEI) simplifies servo feedback, and the PTG (Pulse Train Generator) automates simple sequences without CPU intervention. Architecturally, the 16-bit pipelined core executes most instructions in one cycle, with a DSP engine providing single-cycle MAC and 40-bit accumulators. Pin-compatible peripheral remapping (PPS) lets designers route RPn functions to flexible I/O, easing PCB layout. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, power factor correction, digital UPS systems, and servo/stepper control in industrial automation. Design consideration: the core is powered internally from a VCAP/VDDCORE pin that requires an external low-ESR capacitor (approximately 10 uF with a 0.1 uF in parallel); supply voltage must stay within 3.0V to 3.6V. This page synthesizes verified distributor pricing, drop-in same-footprint alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC502-I/SP - 16-bit DSC 70 MIPS 512KB Flash | Microchip
DSPIC33EP512MC502-I/SP

DSPIC33EP512MC502-I/SP - 16-bit DSC 70 MIPS 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC502-I/SP is a 16-bit digital signal controller (DSC) featuring a 70 MIPS dsPIC33E core, 512 KB Flash program memory, and 48 KB SRAM, housed in a 28-pin SPDIP (0.300 inch, 7.62 mm) through-hole package rated for -40C to +85C industrial operation. A digital signal controller combines the compute engine of a microcontroller with DSP-grade arithmetic hardware, sitting in the system hierarchy between general-purpose microcontrollers and dedicated digital signal processors. In a motor control system, the DSC executes control-loop firmware, field-oriented control math, and communication stacks on a single chip, replacing discrete MCU-plus-DSP architectures. Key differentiating features of this device include a Motor Control PWM (MCPWM) module with complementary outputs and dead-time generation, a Quadrature Encoder Interface (QEI) for position feedback, integrated analog op amps and comparators, and Controller Area Network (CAN) 2.0B connectivity. Four DMA channels move peripheral data without CPU intervention, and five timers plus a Peripheral Trigger Generator (PTG) support autonomous sequenced operation. Architecturally, the dsPIC33E core executes a 24-bit instruction width from a modified Harvard pipeline, reaching 70 MIPS at the 60 MHz internal clock via an on-chip PLL. The DSP engine provides 40-bit accumulators, single-cycle MAC, and barrel shifting, which accelerates FOC, Clarke/Park transforms, and digital filtering. Typical applications include brushless DC and permanent-magnet synchronous motor drives for appliances, HVAC blowers, industrial pumps and fans, plus power conversion such as digital PFC and inverters, and CAN-networked industrial nodes. When designing, note that the 3.0V to 3.6V supply and through-hole SPDIP footprint favor prototyping and low-volume industrial equipment; use ICSP programming with any matched PGECx/PGEDx pair. This page synthesizes distributor pricing, same-family drop-in variants, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC502T-E/MM - 16-bit 60MIPS DSC 512KB Flash | Microchip
DSPIC33EP512MC502T-E/MM

DSPIC33EP512MC502T-E/MM - 16-bit 60MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC502T-E/MM is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS core performance with 512 KB (170K x 24) of FLASH program memory, 24 KB of RAM, and a 3.3 V operating voltage, packaged in a 28-pin QFN-S (6 x 6 mm) surface-mount package with extended -40C to +125C temperature range. A digital signal controller combines the computational architecture of a digital signal processor with the peripherals and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits above a general-purpose MCU: it adds single-cycle DSP multiply-accumulate instructions, a barrel shifter, and dual operand fetch on top of a standard 16-bit MCU pipeline, making it a specialized member of the broader embedded processor family used for control-loop-intensive designs. Key features include the dsPIC33EP core with DSP engine, dual motor-control PWM (MCPWM) modules supporting complementary and center-aligned outputs, a Quadrature Encoder Interface (QEI) for position feedback, a CAN 2.0B controller for automotive and industrial networks, I2C, SPI, and UART/USART serial interfaces, plus integrated analog with 10-bit/12-bit ADC channels, two op amps, and three comparators that reduce external component count in analog front ends. Architecturally, the dsPIC33EP executes an enhanced Harvard 16-bit instruction set at 60 MIPS, with DMA channels offloading peripheral data movement to keep the CPU free for control algorithms. The on-chip MCPWM and QEI subsystems close sensorless or sensored feedback loops for brushless DC and permanent-magnet synchronous motor control, per Microchip's dsPIC33E family positioning for precision motor control systems. Typical applications include BLDC and PMSM motor drives, digital power supplies and power factor correction, industrial automation nodes, and CAN-connected automotive or industrial sensors. The extended-temperature -E variant suits harsh under-hood and factory-floor environments. Design consideration: the QFN-28 (MM) package requires a VCAP capacitor on the internal regulator output and a solid ground plane; place 0.1 uF decoupling at each VDD pin per Microchip layout guidelines. This page synthesizes distributor data, drop-in alternatives, pinout, and practical design notes beyond the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC502T-I/MM - 70 MIPS 16-bit DSC, 512KB Flash | Microchip
DSPIC33EP512MC502T-I/MM

DSPIC33EP512MC502T-I/MM - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC502T-I/MM is a 16-bit digital signal controller (DSC) with a dsPIC33E core running at up to 70 MIPS, 512KB (170K x 24) of Flash program memory, and 48KB of RAM, housed in a 28-pin QFN-S (6x6 mm) surface-mount package with exposed pad. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and ease of use of a microcontroller, occupying the middle of the embedded hierarchy between general-purpose MCUs and standalone DSPs. DSCs are the dominant architecture for embedded motor control, digital power conversion, and sensing systems where real-time control loops execute at tens to hundreds of kilohertz. Key features of this part include the 70 MIPS pipelined dsPIC33E core with integrated DSP multiply-accumulate instructions, motor-control PWM (MCPWM) peripherals, quadrature encoder interface (QEI) inputs, on-chip operational amplifiers and comparators, a 10/12-bit ADC subsystem, and CAN2.0b, I2C, SPI, and UART serial interfaces. The 512KB Flash supports 170K 24-bit instruction words, ample for complex field-oriented control (FOC) firmware with communication stacks. Architecturally, the dsPIC33E family uses a modified Harvard bus with dedicated DSP multiply, multiply-accumulate, and barrel shifter instructions executing in a single cycle, enabling control-loop math and filtering directly in C or assembly. Peripherals support DMA transfers, reducing CPU overhead in high-rate data acquisition. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies and LED drivers, and industrial automation nodes requiring CAN connectivity. Microchip explicitly positions the dsPIC33E family for high-performance, energy-efficient, quieter precision motor control systems. Design consideration: this is a 3.3V (2.97V-3.63V) device; the VCAP/VDDCORE pin requires an external low-ESR capacitor for the internal 2.5V core regulator, and the -40C to +85C industrial temperature grade (I suffix) should be checked against your enclosure thermal budget in sealed motor-drive environments. This page synthesizes distributor pricing context, drop-in family alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC504-E/PT - 16-bit 70 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512MC504-E/PT

DSPIC33EP512MC504-E/PT - 16-bit 70 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC504-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS core performance with 512 KB (170K x 24) of Flash program memory and 48 KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package with extended temperature operation from -40C to +125C. A digital signal controller combines the computational architecture of a microcontroller with the arithmetic capability of a DSP. Within the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs and below dedicated DSPs, offering deterministic control-loop execution for motor drive, digital power conversion, and sensing applications that require fast multiply-accumulate operations alongside real-time peripherals. Key features include the dsPIC33E core with integrated DSP engine (single-cycle MAC, dual operand fetch), dedicated motor-control PWM (MCPWM) with complementary outputs and dead-time insertion, Quadrature Encoder Interface (QEI) inputs for position feedback, 4 DMA channels, and 5 timers. Per the Mouser listing, the part is specified as a 16B DSC with QEI and MCPWM peripherals, and per Master Electronics it operates from a 3 V to 3.6 V supply with 35 I/O pins. The enhanced on-chip peripheral set - high-speed PWM, ADC with multiple sample-and-hold, comparators and op-amp options in family variants - allows closed-loop field-oriented control (FOC) of PMSM and BLDC motors at switching frequencies of tens of kilohertz while leaving CPU headroom for communication stacks such as UART, SPI, I2C, and ECAN. Typical applications include precision BLDC and PMSM motor control, digital power supplies (LLC, PFC, buck), solar inverters, and industrial sensing nodes requiring DSP filtering. The 70 MIPS core executes sensorless FOC loops within a single PWM period. Design consideration: the 3.0-3.6 V supply window requires a clean LDO or buck-derived 3.3 V rail; all VDD/VSS pairs must be decoupled with 100 nF ceramics placed at each pin pair. This page synthesizes distributor pricing, drop-in same-family alternatives, and design notes beyond what the manufacturer datasheet provides, with data verified 2026-09-25.

Cotação Contato
DSPIC33EP512MC504-E/TL - 70 MIPS 16-bit DSC, 512KB Flash | Microchip
DSPIC33EP512MC504-E/TL

DSPIC33EP512MC504-E/TL - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC504-E/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS performance with 512 KB (170K x 24) of Flash program memory and 48 KB of RAM, housed in a 44-lead VTLA exposed-pad package and qualified to AEC-Q100 for automotive use. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and control-oriented architecture of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC such as the dsPIC33EP512MC504 sits between general-purpose MCUs and dedicated DSPs, making it a preferred single-chip solution when deterministic control loops, fast interrupt handling, and math-intensive filtering must coexist on one device. Key features include the 70 MIPS dsPIC33E core, 512 KB Flash organized as 170K x 24 words, 48 KB of RAM, and an enhanced peripheral set tailored to precision motor control: quadrature encoder interface (QEI) inputs, the high-resolution motor control PWM (MCPWM) module, and four DMA channels that offload data movement from the CPU. Communications span I2C, SPI, UART with IrDA support, and CAN, allowing the controller to bridge real-time control loops with vehicle or industrial fieldbus networks. The dsPIC33EP architecture pairs a 16-bit pipeline core with integrated DSP multiply-accumulate instructions, enabling single-cycle MAC operations for FOC (field-oriented control) transforms, PID loops, and digital filters. The 4 DMA channels and 5 timers support deterministic sampling of current and position feedback, while low-power modes allow rail-compliant sleep currents in battery-adjacent designs. Operating from a 3.3 V supply, the device simplifies integration with modern sensor and gate-driver logic levels. Typical applications include brushless DC and PMSM motor control in automotive subsystems, digital power converters such as PFC and LLC stages, and industrial drives that require QEI feedback with CAN connectivity. The AEC-Q100 qualification of the -E/TL grade specifically targets harsh-environment automotive deployments. When designing with this DSC, budget the exposed pad as the primary thermal and ground path: a solid via-fan array under the VTLA package keeps junction temperature within limits during sustained 70 MIPS operation. Also verify PGECx/PGEDx pairing when routing ICSP programming headers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC504-H/ML - 70 MIPS DSC 512KB Flash QFN-44 | Microchip
DSPIC33EP512MC504-H/ML

DSPIC33EP512MC504-H/ML - 70 MIPS DSC 512KB Flash QFN-44 | Microchip

The Microchip DSPIC33EP512MC504-H/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC family, delivering up to 70 MIPS core performance with 512 KB of Flash memory and 48 KB of SRAM, housed in a 44-pin QFN (8x8 mm) package with exposed pad. It operates from a 3 V to 3.6 V supply and integrates a Motor Control PWM (MCPWM) module with quadrature encoder interface (QEI) support. A digital signal controller combines the computational power of a DSP with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits at the intersection of microcontrollers and digital signal processors, making it the standard controller class for real-time closed-loop motor and power-conversion systems such as field-oriented control (FOC) of PMSM and BLDC motors. Key differentiating features include the high-speed MCPWM peripheral with complementary outputs, dead-time insertion and fault protection, the QEI module for position feedback from incremental encoders, multiple high-speed 12-bit ADC channels, and 35 general-purpose I/O pins. The EP-generation core supports DSP multiply-accumulate instructions for filtering and control-law computation at deterministic latency. Technically, the dsPIC33EP core executes one instruction per cycle at full speed with a pipelined architecture, hardware loop support and dual operand fetch, enabling single-cycle MAC operations critical for control loops running at tens of kilohertz. The 512 KB Flash array supports self-programming for field updates, and the 48 KB SRAM provides headroom for control state machines, communications buffers and filter histories. Typical applications include precision BLDC and PMSM motor drives, digital power supplies and PFC stages, solar micro-inverters, and industrial automation equipment requiring deterministic real-time control with integrated PWM generation. Design consideration: the -H suffix denotes the extended operating temperature grade; verify supply decoupling on all VDD/VSS pin pairs and the exposed pad solder connection for thermal and ground integrity in high-PWM-switching designs. This page synthesizes distributor pricing, pin-compatible same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-25.

Cotação Contato
DSPIC33EP512MC504-H/PT - 70 MIPS DSC 512KB Flash TQFP-44 | Microchip
DSPIC33EP512MC504-H/PT

DSPIC33EP512MC504-H/PT - 70 MIPS DSC 512KB Flash TQFP-44 | Microchip

The Microchip Technology DSPIC33EP512MC504-H/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, combining a 70 MIPS dsPIC33E core with 512 KB (170K x 24) of flash program memory, 48 KB of SRAM, motor-control PWM (MCPWM) and quadrature encoder interface (QEI) peripherals, all housed in a 44-pin TQFP (PT) surface-mount package operating at 3.3 V. A digital signal controller merges the control peripherals of a microcontroller with the math throughput of a DSP. In the power-management hierarchy, DSCs such as the dsPIC33EP sit above general-purpose MCUs for closed-loop control tasks, executing fixed-point DSP instructions (multiply-accumulate, barrel shifting) in a single cycle, which is essential for field-oriented motor control and digital power loops running at tens to hundreds of kilohertz. Key features include the 16-bit dsPIC RISC core delivering up to 70 MIPS, 4 direct memory access (DMA) channels that offload data movement from the CPU, 5 general-purpose timers, hardware QEI for incremental encoder feedback, and advanced analog blocks (12-bit ADCs and comparators) characteristic of the MC (motor control) variant. The -H temperature grade supports -40C to +125C operation, and Hotenda lists the family as AEC-Q100 suited for automotive applications. Architecturally, the dsPIC33EP core uses an enhanced Harvard bus structure with separate program and data paths, a 24-bit instruction word, and DSP engine supporting single-cycle MAC operations. The 48 KB SRAM is served by a fast bus that, together with DMA, sustains high-rate ADC sampling without CPU intervention - critical for FOC algorithms updating PWM duty cycles every switching period. Typical applications include precision BLDC/PMSM motor drives, digital power supplies (PFC, LLC), automotive auxiliary motor control, and industrial automation nodes requiring deterministic control loops with encoder feedback. For design, budget flash conservatively: the 512 KB program memory allows field-updatable firmware with dual-bank storage, but all VDD pins must be properly decoupled and PGEC/PGED ICSP pairs kept accessible for In-Circuit Serial Programming. This page synthesizes verified distributor data, same-package drop-in alternatives, and practical design notes beyond the raw datasheet.

Cotação Contato
DSPIC33EP512MC504-I/PT - 70 MIPS 16-bit DSC, 512KB Flash, 44-TQFP
DSPIC33EP512MC504-I/PT

DSPIC33EP512MC504-I/PT - 70 MIPS 16-bit DSC, 512KB Flash, 44-TQFP

The Microchip Technology DSPIC33EP512MC504-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, featuring a 70 MIPS dsPIC DSC core, 512 KB of Flash program memory and 48 KB of RAM, housed in a 44-lead TQFP (10x10 mm) package rated for -40C to +85C industrial operation. The device integrates motor-control-specific peripherals including high-speed PWM with complementary outputs, a quadrature encoder interface (QEI), four DMA channels, and five timers, alongside ECAN, I2C, SPI, and UART communication. With 35 general-purpose I/O pins, the 44-pin package balances I/O count against board footprint for compact precision motor drive boards. A digital signal controller (DSC) combines the deterministic DSP compute engine of a digital signal processor with the deterministic peripheral set, interrupts, and ease-of-use of a microcontroller. In the broader power-management and motion-control hierarchy of embedded systems, DSCs sit between general-purpose 16-bit/32-bit MCUs and dedicated DSPs, delivering single-cycle MAC instructions and DSP-style addressing modes while retaining MCU-class toolchains. The dsPIC33EP family is Microchip's high-performance 16-bit DSC generation built around an enhanced dsPIC33E core, targeting precision motor control and digital power conversion. Key differentiating features include 4 DMA channels for data movement without CPU intervention, hardware single-cycle 17-bit x 17-bit MAC, an internal PLL for flexible clocking from an external primary oscillator, and an in-circuit serial programming (ICSP) interface with paired PGECx/PGEDx pins. The on-chip high-speed PWM module supports complementary outputs and dead-time control, while the QEI module accepts direct quadrature signals from incremental encoders for closed-loop position feedback. Architecturally, the dsPIC33EP core executes most instructions in a single cycle at up to 70 MIPS, with hardware divide and dual operand fetch for sustained DSP throughput. Flash memory supports in-circuit self-programming for field firmware updates, and the integrated ECAN module provides CAN 2.0B connectivity for industrial automation and automotive body networks. Typical applications include brushless DC motor control, permanent-magnet synchronous motor (PMSM) drives with field-oriented control, digital power supplies (PFC and LLC resonant converters), and sensorless FOC drives requiring deterministic DSP-class math. Industrial automation nodes with CAN bus connectivity also benefit from the ECAN peripheral. Design consideration: connect all VDD/VSS pin pairs to their respective rails, and use the same PGECx/PGEDx pair for both ICSPCLK and ICSPDAT during programming; mismatched pairs are the most common bring-up failure when using a debug probe. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-10-07.

Cotação Contato
DSPIC33EP512MC504T-E/ML - 60 MIPS 16-bit DSC 512KB Flash | Microchip
DSPIC33EP512MC504T-E/ML

DSPIC33EP512MC504T-E/ML - 60 MIPS 16-bit DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC504T-E/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering up to 60 MIPS performance with 512KB (170K x 24) of FLASH program memory and 48KB of RAM, housed in a 44-pin QFN (8x8 mm) exposed-pad package rated for -40C to +125C automotive operation (AEC-Q100 qualified). A digital signal controller combines the compute architecture of a microcontroller with the math acceleration of a DSP. In the power-management hierarchy, a DSC sits above general-purpose MCUs for control-loop-intensive tasks: it executes single-cycle MAC and DSP instructions, making it the standard choice for precision motor control, digital power conversion, and sensor-fusion embedded systems where deterministic interrupt latency and fast control loops are required. Key features of the DSPIC33EP512MC504 include a 16-bit dsPIC DSC core with DSP engine and barrel shifter, multiple motor-control PWM (MCPWM) modules with complementary outputs and dead-time control, quadrature encoder interface (QEI) inputs, integrated operational amplifiers and comparators, CAN 2.0B, I2C, SPI, and UART/USART serial interfaces, plus DMA channels and a peripheral trigger generator (PTG) for offloading tasks from the CPU core. Operation is from a single 3.3V supply (3.0V to 3.6V range). Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with 24-bit instruction words, allowing simultaneous instruction fetch and data access. The integrated DSP engine supports single-cycle MAC operations with dual data fetches, enabling FOC (field-oriented control) motor algorithms at high loop rates. Flash self-programming supports field firmware updates, and boundary-scan support aids board-level test. Typical applications include brushless DC and PMSM motor drives for industrial automation, automotive electric pumps and actuators, digital LED lighting and power supplies (power factor correction and LLC control), and sensor-based embedded control in harsh -40C to +125C environments. Design consideration: supply the exposed thermal pad with a solid ground connection for signal integrity and thermal relief, and budget a 2-layer-decent PCB layout that keeps the MCPWM outputs away from the crystal and analog op-amp inputs; the 3.0V-to-3.6V supply window means 5V-only systems need a regulator and level translation on 5V-tolerant-critical signals. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design guidance not found in the manufacturer datasheet alone, with data verified as of 2026-09-25.

Cotação Contato
DSPIC33EP512MC504T-E/PT - 16-bit DSC 60 MIPS 512KB Flash | Microchip
DSPIC33EP512MC504T-E/PT

DSPIC33EP512MC504T-E/PT - 16-bit DSC 60 MIPS 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC504T-E/PT is a 16-bit dsPIC33EP series digital signal controller (DSC) delivering 60 MIPS core performance with 512KB (170K x 24) FLASH program memory and 24KB of RAM, housed in a 44-pin TQFP (10x10 mm) package. A digital signal controller combines the compute architecture of a microcontroller with the mathematical throughput of a digital signal processor. In the power-management hierarchy of embedded systems, a DSC such as the dsPIC33EP family sits between general-purpose MCUs and dedicated DSPs, providing deterministic control loops for real-time motor control, digital power conversion, and sensor fusion while retaining flash memory, GPIO, and standard communication peripherals on one die. Key features include an extended-temperature (-40C to +125C) AEC-Q100 qualified rating for automotive environments, integrated CANbus, I2C, SPI, and UART/USART communication interfaces, multiple motor-control PWM (MCPWM) modules with complementary outputs and dead-time insertion, quadrature encoder interface (QEI) inputs, and on-chip op amps and comparators that reduce external component count in current-sense paths. Technically, the dsPIC33EP core executes an enhanced 16-bit instruction set with DSP multiply-accumulate, barrel shifter, and modulo addressing, enabling single-cycle MAC operations for FOC (field-oriented control) and Park/Clarke transforms. The /T suffix indicates tape-and-reel delivery for automated assembly; the /E suffix denotes the -40C to +125C extended temperature range. Typical applications include brushless DC and PMSM motor drives, automotive auxiliary actuators, digital power supplies (PFC and LLC control), and industrial automation nodes requiring CAN connectivity. Designers should budget the 3V to 3.6V supply rail with adequate decoupling on all VDD/VSS pin pairs and use the dedicated MCPWM modules rather than software-generated PWM to guarantee deterministic dead-time. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC504T-E/TL - 16-bit 60 MIPs DSC | Microchip
DSPIC33EP512MC504T-E/TL

DSPIC33EP512MC504T-E/TL - 16-bit 60 MIPs DSC | Microchip

The Microchip Technology DSPIC33EP512MC504T-E/TL is a 16-bit dsPIC33EP series digital signal controller (DSC) delivering 60 MIPS core performance with 512 KB (170K x 24) of FLASH program memory and 24 KB of RAM, packaged in a 44-pin VTLA QFN (6x6 mm) with exposed pad and rated for the extended -40C to +125C automotive temperature range. A digital signal controller combines the periphery of a microcontroller with the DSP engine of a digital signal processor. In the power-management hierarchy of embedded systems, the dsPIC33E family sits between general-purpose MCUs and dedicated DSPs, offering single-cycle MAC, barrel shifter, and DSP instruction support alongside familiar MCU peripherals such as UART, SPI, I2C, and CAN. This hybrid architecture makes DSCs the de-facto choice for closed-loop control systems. Key features include the 60 MIPS 16-bit dsPIC core, motor-control PWM peripherals with high resolution, 4 DMA channels for offloading data movement from the CPU, and integrated CANbus, I2C, SPI, and UART/USART interfaces. The AEC-Q100 qualification and E-grade temperature rating make this tape-and-reel variant suited to high-volume automotive and industrial builds. Architecturally, the device uses a modified Harvard pipeline with 24-bit instruction words, a barrel shifter for fast bit manipulation, and boundary-scan (JTAG) debug support. The 170K x 24 FLASH organization allows in-circuit self-programming, while the 24 KB data RAM supports control-loop state, communication buffers, and DSP working arrays. According to the Microchip dsPIC33EP512MC504 datasheet, the family is purpose-built for precision motor control. Typical applications include brushless DC and PMSM motor drives (FOC and sensorless algorithms), automotive body and powertrain auxiliary modules, digital power supplies and inverters, and industrial automation nodes requiring CAN connectivity. Design consideration: the 6x6 mm QFN exposed pad is the primary thermal and ground path; a solid ground pour with an array of thermal vias under the pad is essential for reliable operation at the +125C ambient ceiling. This page adds value beyond the datasheet by consolidating distributor pricing tiers, same-package drop-in alternatives, pin-level design notes, and application guidance not found in the manufacturer documentation.

Cotação Contato
DSPIC33EP512MC504T-I/ML - 16-bit 70 MIPS DSC, 512KB Flash | Microchip
DSPIC33EP512MC504T-I/ML

DSPIC33EP512MC504T-I/ML - 16-bit 70 MIPS DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC504T-I/ML is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS from a dsPIC33E core, with 512 KB (170K x 24) of FLASH program memory and 48 KB of RAM, housed in a 44-pin QFN (8x8 mm) package with exposed thermal pad. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and ease of use of a microcontroller, sitting between an MCU and a DSP in the embedded hierarchy. Within power management and control systems, DSCs are the preferred platform for closed-loop control loops that demand deterministic math execution, fast interrupt latency, and specialized peripherals such as motor-control PWM and quadrature encoders. Key features include the 70 MIPS 16-bit pipelined core with integrated DSP multiply-accumulate instructions, 512 KB of self-programmable FLASH that allows field firmware updates, and 48 KB of data RAM sized for buffering and control algorithms. Integrated peripherals span CAN, I2C, SPI, UART/USART and IrDA serial interfaces, 35 programmable I/O pins, 12 timers/counters, quadrature encoder interface (QEI), motor control PWM (MCPWM), on-chip op amps and comparators, making the part a single-chip solution for digitally controlled power and motion systems. Architecturally, the dsPIC33E core pairs a 16-bit MCU instruction set with DSP engine extensions, enabling deterministic single-cycle MAC operations critical to field-oriented motor control and digital power conversion. The operating supply range of 3 V to 3.6 V suits standard 3.3 V single-supply boards, and the industrial temperature grade (-40 C to +85 C) covers most commercial and industrial environments. Typical applications include precision motor control (BLDC, PMSM, stepper) for industrial drives, digital power supplies and solar inverters, and embedded control nodes in HVAC, lighting, and factory automation. The CAN interface makes it a strong fit for automotive-adjacent and industrial networking nodes. Design consideration: the QFN-44 exposed-pad package requires a solid ground connection via the thermal pad to the PCB ground plane for both heat dissipation and signal integrity; budget 3.3 V rail decoupling of 0.1 uF per supply pin group. This page synthesizes distributor pricing, verified drop-in alternatives, practical design notes, and application guidance not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC504T-I/PT - 16-bit 70 MIPS DSC 512KB | Microchip
DSPIC33EP512MC504T-I/PT

DSPIC33EP512MC504T-I/PT - 16-bit 70 MIPS DSC 512KB | Microchip

The Microchip Technology DSPIC33EP512MC504T-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS performance, 512 KB (170K x 24) of Flash program memory, and 48 KB of RAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package with tape-and-reel delivery. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral integration and control-oriented instruction set of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs and below dedicated DSPs, offering deterministic single-cycle multiply-accumulate (MAC) and DSP engine instructions while retaining flash memory, timers, and mixed-signal peripherals on one die. The dsPIC33E family from Microchip is the flagship of this category for real-time control. Key features of the DSPIC33EP512MC504T-I/PT include the 70 MIPS dsPIC DSC core, integrated DSP engine, four DMA channels for peripheral-to-memory transfers without CPU overhead, five timers, and Quadrature Encoder Interface (QEI) inputs. The high-speed Motor Control PWM (MCPWM) module is a family hallmark, enabling center-aligned, complementary, and dead-time-controlled PWM outputs for three-phase inverters. Technically, the device is a CMOS fixed-point 16-bit controller clocked at up to 60 MHz external (70 MIPS internal with PLL), with 49152 words of program flash and JTAG boundary-scan support for board-level test. The 3.3V supply range simplifies integration with modern logic and gate drivers, and the industrial -40C to +85C temperature grade suits harsh environments. Typical applications include precision motor control (BLDC, PMSM, ACIM drives), digital power supplies and power factor correction, and embedded control systems in industrial automation and robotics that require fast control loops with deterministic interrupt latency. When designing with this part, budget the 3.3V rail carefully: peak core current depends on clock frequency, and the MCPWM dead-time settings should be verified against gate-driver propagation delays to prevent shoot-through. This page synthesizes distributor availability, drop-in family alternatives, and practical design notes not found in a single manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC506-H/MR - 16-bit 60 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512MC506-H/MR

DSPIC33EP512MC506-H/MR - 16-bit 60 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC506-H/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 60 MIPS performance with 512KB (170K x 24) of FLASH program memory and 48KB of RAM, housed in a 64-pin VQFN (9x9 mm, MR) exposed-pad package. A digital signal controller combines the computational power of a DSP with the peripheral integration and deterministic interrupt architecture of a microcontroller. Within the power-management hierarchy of embedded systems, the dsPIC33E family occupies the high-performance motor-control tier: it sits above general-purpose MCUs by adding hardware DSP multiply-accumulate (MAC) instructions, quadrature encoder interfaces (QEI), and motor-control PWM (MCPWM) peripherals purpose-built for precision motion and power-conversion loops. Key features include the 16-bit dsPIC33E RISC core with DSP engine, QEI modules for encoder feedback, dedicated MCPWM peripherals with complementary outputs and dead-time control, on-chip operational amplifiers, analog comparators, a peripheral trigger generator (PTG), and a CAN module for industrial networking. The 64-pin VQFN with exposed pad provides low-inductance ground return and excellent thermal performance for high-frequency PWM switching applications. Architecturally, the device executes from zero-wait-state flash at full speed, provides 4 DMA channels to offload data movement from the CPU, and offers 5 timers for time-base generation. The -H temperature designation corresponds to a specific operating-grade variant; engineers should verify the exact temperature range against the manufacturer datasheet before finalizing designs for extreme environments. Typical applications include brushless DC (BLDC) and PMSM motor drives, digital power supplies (PFC, LLC), solar inverters, industrial automation nodes on CAN networks, and embedded control systems requiring DSP-grade filtering algorithms. For design, place the exposed thermal pad soldered to a solid ground plane and decouple all VDD/VDDCORE pins with 0.1uF ceramics close to the pins. Verify flash wait states and PLL configuration against the 60 MIPS rating for the chosen crystal. This page synthesizes distributor pricing context, drop-in family alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC506-I/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip
DSPIC33EP512MC506-I/PT

DSPIC33EP512MC506-I/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC506-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS performance from its dsPIC33E core, with 512 KB of Flash memory and 48 KB of SRAM, housed in a 64-pin TQFP (10x10 mm, PT) surface-mount package. A digital signal controller combines the computational power of a digital signal processor with the peripheral integration and control architecture of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, making it the natural choice for closed-loop control loops that require both fast multiply-accumulate (MAC) operations and deterministic I/O behavior. The dsPIC33E family extends this concept with dedicated motor-control peripherals including the Motor Control PWM (MCPWM) and Quadrature Encoder Interface (QEI). Key features of this part include the 70 MIPS dsPIC DSC core with DSP instruction support (single-cycle MAC, dual operand fetch), up to 18 channels of 10-bit ADC sampling at 1.1 Msps (4 Msps when paired), and a dedicated Motor Control PWM (MCPWM) module with complementary outputs, dead-time insertion, and fault protection, plus QEI inputs for position feedback. The 64-pin TQFP package offers a balance between I/O count and board footprint for space-constrained motor drives. Technical depth: the dsPIC33E core uses a modified Harvard architecture with a 16-bit data path, 24-bit instruction words, and a 16x16 fractional/integer multiplier. Peripheral integration includes multiple UART, SPI, and I2C ports, a Peripheral Pin Select (PPS) scheme that routes digital peripherals to selectable pins, and an internal FRC oscillator with PLL allowing full-speed operation without an external crystal. The MCPWM can generate switching frequencies well above 1 MHz for high-speed power-converter control. Typical applications include precision brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies and PFC stages, solar inverters, and industrial automation control boards. The MCPWM plus high-speed ADC combination directly targets these switch-mode control loops where deterministic timing is critical. Design consideration: at 70 MIPS the core is sensitive to supply integrity; use the dedicated VCAP/VDDCORE stabilizing capacitor per the datasheet and place decoupling on every VDD/VSS pair. Budget interrupt latency for the control-loop ISR at high ADC trigger rates. This page synthesizes distributor pricing, same-family drop-in alternatives, pinout guidance, and practical motor-control design notes not found in a single manufacturer document.

Cotação Contato
DSPIC33EP512MC506T-E/MR - 16-bit 60 MIPS DSC 512KB Flash | Microchip
DSPIC33EP512MC506T-E/MR

DSPIC33EP512MC506T-E/MR - 16-bit 60 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC506T-E/MR is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS performance with 512KB (170K x 24) of FLASH program memory, 24KB of RAM, and a 64-pin VQFN (9x9 mm) surface-mount package. A digital signal controller combines the computational architecture of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the embedded hierarchy, the dsPIC33EP family sits above general-purpose 8-bit and 16-bit MCUs and below full DSPs, providing deterministic control-loop execution for motor control, digital power conversion, and sensing applications that require both C-language programmability and hardware DSP throughput. Key features include the 16-bit dsPIC33EP core with DSP instruction extensions, 512KB of self-programmable FLASH, and a rich peripheral set covering CANbus, I2C, IrDA, LINbus, QEI (quadrature encoder interface), SPI, and UART/USART connectivity per Microchip product documentation. The QEI peripheral is particularly significant: it directly decodes encoder feedback without CPU overhead, making the device well suited to servo and BLDC motor drives. Technically, the dsPIC33EP architecture pairs the CPU with on-chip peripherals such as timers, DMA channels, and high-speed PWM modules typical of the MC (motor control) subfamily, enabling field-oriented control (FOC) and complementary PWM generation with dead-time insertion. The extended temperature grade (-E) supports -40C to +125C operation, allowing placement near power stages in industrial drives. Typical applications include precision motor control (BLDC, PMSM, stepper), digital power supplies and solar inverters, and industrial automation nodes requiring CAN or LIN connectivity. Design consideration: the 64-VQFN 9x9 mm package requires a solid ground plane and careful decoupling on the 3V to 3.6V supply; thermal pads on the MR variant must be well soldered for the extended temperature range. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP512MC506T-E/PT - 60 MIPS 16-bit DSC | Microchip
DSPIC33EP512MC506T-E/PT

DSPIC33EP512MC506T-E/PT - 60 MIPS 16-bit DSC | Microchip

The Microchip Technology DSPIC33EP512MC506T-E/PT is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 60 MIPS performance, 512KB (170K x 24) of Flash program memory and 48KB of RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package with AEC-Q100 qualification and extended temperature operation. A digital signal controller combines the computational power of a microcontroller with the numeric throughput of a digital signal processor in a single core. In the system hierarchy, the dsPIC33EP family sits above general-purpose PIC16/PIC18 MCUs and alongside dedicated DSP chips, making it a power-management and control workhorse for embedded systems that need both control-loop code and DSP math on one die. Key features include the 16-bit dsPIC33E pipeline core running at up to 70 MHz (60 MIPS), integrated motor-control PWM (MCPWM), quadrature encoder interface (QEI), CAN 2.0B for automotive and industrial networking, three on-chip operational amplifiers and four comparators for current-sense loops, and a PTG (programmable sequence generator) for offloading simple triggering tasks from software. The 12-bit ADC and DSP multiply-accumulate instructions support fast control loops. Architecturally, the device uses an enhanced Harvard bus with DMA to feed peripherals such as the ADC, UARTs, SPI and I2C without CPU intervention. Flash retention and ECC-backed memory options in the 33EP generation improve reliability for automotive designs, while the extended-temperature E grade supports -40C to +125C environments. Typical applications include precision brushless DC and PMSM motor control for industrial drives, automotive actuator control, digital power conversion (PFC, inverters), and sensor fusion nodes that require CAN connectivity. Design consideration: budget for a clean 3.3V rail with local decoupling on every VDD/VSS pair, and verify which PWM/ADC functions are multiplexed onto RPn remappable pins early in the layout. This page synthesizes distributor data, drop-in family alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33EP512MC806-E/PT - 512KB Flash 16-bit DSC, 64-TQFP | Microchip
DSPIC33EP512MC806-E/PT

DSPIC33EP512MC806-E/PT - 512KB Flash 16-bit DSC, 64-TQFP | Microchip

The Microchip Technology DSPIC33EP512MC806-E/PT is a high-performance 16-bit Digital Signal Controller (DSC) from the dsPIC33EP family, integrating a 70 MIPS dsPIC DSC core with 512 KB of Flash program memory and 53 KB of RAM in a 64-pin TQFP (10x10 mm) package. It is purpose-built for advanced motor control, digital power conversion, and real-time DSP applications, offering a 60 MIPS (max) execution throughput when operating from a 3.0 V to 3.6 V supply. A Digital Signal Controller (DSC) is a hybrid MCU/DSP architecture that combines a microcontroller's deterministic interrupt handling and peripherals with a digital signal processor's single-cycle MAC engine and barrel shifter. DSP engines fall under the broader hierarchy of microcontrollers -> embedded processors -> microcomputing units, sitting in the same tier as the Cortex-M4 and dsPIC33E/C families, but optimized for closed-loop control rather than general compute. The dsPIC33EP series specifically targets motor control and power-conversion workloads where PWM edge accuracy and ADC sampling determinism matter more than raw CPU frequency. Key features of the DSPIC33EP512MC806-E/PT include dual motor-control PWM modules with up to 7 PWM outputs each, two 10-bit A/D converters (up to 32 input channels total), two analog comparators, two quadrature encoder interfaces, and dual CAN 2.0B controllers. The integrated DSP engine provides single-cycle 16x16-bit MAC with saturation, allowing real-time computation of Clarke/Park transforms and PI controllers without software emulation. AEC-Q100 qualification makes the E (extended) temperature grade device suitable for automotive environments from -40°C to +125°C. Typical applications include sensorless and field-oriented control (FOC) of three-phase PMSM and BLDC motors, digitally controlled switched-mode power supplies (SMPS), solar inverters, servo drives, and industrial PLCs. Two CAN interfaces simplify integration into vehicle body/comfort networks, while the dual QEI channels enable simultaneous position feedback from two motors. Power-conscious designs benefit from the integrated DSP instructions that replace software filter-loop computations. When designing with this device, plan memory allocation between the 512 KB Flash (170K x 24) and 53 KB RAM early, and verify PWM-to-ADC synchronization timing on the chosen TQFP-64 routing. Boot Flash and dual-partition Flash modes can simplify in-field firmware upgrades - refer to the device family reference manual for ICSP/ICD layout. This page synthesizes distributor pricing, pin-compatible variants, and design notes beyond what the manufacturer datasheet alone provides.

Cotação Contato
DSPIC33EP512MC806-I/MR - 70 MIPS 16-bit DSC, 512KB Flash | Microchip
DSPIC33EP512MC806-I/MR

DSPIC33EP512MC806-I/MR - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC806-I/MR is a 16-bit digital signal controller (DSC) delivering 70 MIPS performance from its dsPIC33E core, with 512KB (170K x 24) of flash program memory and 53,248 bytes of RAM, housed in a 64-pin VQFN (9x9 mm) package, industrial temperature grade -40C to +85C. A digital signal controller combines the computational architecture of a microcontroller with the math acceleration of a digital signal processor. Within the power-management hierarchy of embedded control, the DSC sits above general-purpose MCUs and alongside dedicated DSPs, providing single-cycle MAC (multiply-accumulate) instructions, hardware divide support, and DSP engine features while retaining MCU-style peripherals, interrupts, and flash-based code storage. This makes the dsPIC33E family a de facto standard for embedded motor control and digital power conversion. Key features of the DSPIC33EP512MC806-I/MR include the 70 MIPS dsPIC DSC core with integrated DSP engine, dual CAN modules (the datasheet describes this device as a DSC with Dual Motor Control, Dual CAN), a high-speed PWM module tailored for motor control, and Peripheral Pin Select (PPS) that allows remapping of RPn/RPIn pins to many digital peripherals for maximum layout flexibility. Architecturally, the dsPIC33E core executes an enhanced 16-bit instruction set with DSP-class addressing modes, supporting precision control loops for field-oriented motor control, digital power supplies (PFC, LLC), and digital audio processing. The large 512KB flash accommodates complex control firmware, bootloaders, and parameter tables, while the 53 KB RAM supports buffering for communication stacks and control-loop state. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, solar inverters and digital power supplies, automotive and industrial CAN networking nodes, and high-performance embedded control systems requiring deterministic DSP math. Design consideration: this device is reported to be more sensitive to cross-talk between the PGEC and PGED in-circuit programming lines than other PIC devices, so keep ICSP traces short and well-guarded to avoid programming failures. This page synthesizes verified distributor pricing, drop-in alternatives within the same 64-VQFN footprint, and practical design notes not found on a single manufacturer or distributor page.

Cotação Contato
DSPIC33EP512MC806-I/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip
DSPIC33EP512MC806-I/PT

DSPIC33EP512MC806-I/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC806-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC family, integrating a 70 MIPS DSP-enhanced core with 512 KB of Flash program memory and 52 KB of RAM in a 64-pin TQFP (10x10 mm) package rated -40C to +85C and operating at 3.3 V. A digital signal controller (DSC) bridges the gap between a microcontroller and a digital signal processor by combining deterministic interrupt response, integrated peripherals, and a single-cycle 16x16 hardware multiply-accumulate (MAC) with barrel shifter. In the broader power-management and real-time-control hierarchy, the dsPIC33E family sits between general-purpose 16-bit MCUs and dedicated DSPs, with embedded control positioned as digital-signal controller -> 16-bit MCU -> microcontroller -> semiconductor. Hypernyms and synonyms: DSC = digital signal controller = dsPIC = DSC. Key features include the 70 MIPS dsPIC33E core with single-cycle MAC, dual high-speed motor-control PWM modules with complementary outputs and dead-time insertion, two CAN 2.0B modules, and a rich serial mix of I2C, I2S, SPI, and UART/USART interfaces. The device exposes 53 general-purpose I/O pins and carries the -I industrial temperature grade. Architecturally, the dsPIC33EP core uses an enhanced Harvard bus with 24-bit instruction words, allowing program memory up to 512 KB to be fetched every cycle. The high-speed PWM modules support center-aligned and edge-aligned modes with sub-microsecond resolution, essential for three-phase inverter and digital power topologies. Internal voltage regulators, an on-chip oscillator with PLL, and DMA channels reduce external component count. Typical applications include precision motor control (BLDC, PMSM, ACIM), digital power conversion and solar inverters, industrial automation nodes using dual CAN buses, and embedded control requiring DSP-class math for sensor filtering. The dual CAN modules make the part especially suitable for industrial networked systems. Design consideration: all VDD and VSS pins must be connected for reliable operation, and the ICSP PGECx/PGEDx pins must be used as a matched pair. The 64-pin TQFP package requires attention to the VCAP pin for the internal core regulator stabilization capacitor. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet, giving engineers a single citable reference for the DSPIC33EP512MC806-I/PT.

Cotação Contato
DSPIC33EP512MU810-E/BG - 16-bit 70 MIPS DSC, 512KB Flash | Microchip
DSPIC33EP512MU810-E/BG

DSPIC33EP512MU810-E/BG - 16-bit 70 MIPS DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MU810-E/BG is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 512 KB (170K x 24) Flash memory, 52 KB SRAM, integrated USB and dual CAN modules, housed in a 121-ball TFBGA (10x10 mm) package with extended temperature range of -40C to +125C. A digital signal controller combines the computation throughput of a DSP with the deterministic, interrupt-driven behavior and peripheral set of a microcontroller. In the semiconductor hierarchy it sits above general-purpose MCUs and beside DSPs, belonging to the broader class of 16-bit embedded processors used in closed-loop control systems where fast multiply-accumulate operations are required. Key features include the 70 MIPS dsPIC33E DSP engine with dual 40-bit accumulators and single-cycle MAC, high-speed PWM modules purpose-built for motor control, full-speed USB OTG, two CAN 2.0B controllers for industrial networking, and Microchip nanoWatt XLP low-power technology for reduced standby consumption. Technically, the dsPIC33EP512MU810 executes from 3.0V to 3.6V single-supply operation, supports 60 MHz internal clocking per distributor listings, and integrates 51 I/O pins in the BGA option along with advanced analog peripherals. The E suffix denotes the extended -40C to +125C operating range, and the device is listed as AEC-Q100 capable for automotive environments by distributor sources. Typical applications include dual motor control (BLDC, PMSM, ACIM), digital power supplies and solar inverters, and automotive or industrial gateways that need USB plus dual CAN connectivity. Design consideration: plan the 121-ball BGA layout early - escape routing requires controlled-impedance fanout and a solid ground plane; power supply decoupling on all VDD balls is essential for the 70 MIPS core. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33EP512MU810-E/PT - 16-bit DSC 60 MIPS USB TQFP-100 | Microchip
DSPIC33EP512MU810-E/PT

DSPIC33EP512MU810-E/PT - 16-bit DSC 60 MIPS USB TQFP-100 | Microchip

The Microchip Technology DSPIC33EP512MU810-E/PT is a 16-bit digital signal controller (DSC) delivering up to 60 MIPS from its dsPIC33E core, with 512 KB (170K x 24) of Flash program memory, 52 KB of SRAM, and integrated full-speed USB 2.0 On-The-Go, housed in a 100-pin TQFP (12x12 mm) package with extended -40C to +125C temperature rating. A digital signal controller combines the compute characteristics of a digital signal processor with the peripheral integration and control-oriented architecture of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33E family a common choice for precision motor control, digital power conversion, and sensing applications that require both fast multiply-accumulate arithmetic and rich on-chip peripherals. Key features include a 17-bit x 17-bit hardware multiplier with a 40-bit accumulator, 15 DMA channels for low-CPU-overhead data movement, high-speed PWM modules optimized for three-phase motor and digital-power topologies, four UART/SPI/I2C serial interfaces, and a 12-bit ADC with up to 1.1 Msps conversion rate on the analog peripherals. The 512 KB Flash supports self-programming for in-field firmware updates. The dsPIC33EP MU810 family uses Microchip's 16-bit EP core architecture with linear program memory addressing up to 4M instruction words, hardware integer division support, and a deterministic interrupt controller. USB OTG, CAN, and SENT peripherals enable networked industrial nodes without an external bridge IC. Typical applications include brushless DC and PMSM motor drives running sensorless field-oriented control, digital power supplies and solar micro-inverters, USB-connected industrial instrumentation, and general-purpose sensing nodes running FFT or FIR DSP filters. The integrated USB also suits data-acquisition probes and Human Interface Devices (HID). When designing with this part, ensure a 3.0V to 3.6V supply with proper decoupling on every VDD/VSS pair and a clean AVDD rail for the on-chip ADC; plan the TQFP-100 ground strategy from the first PCB revision to avoid analog digital noise coupling into the PWM feedback paths. This page synthesizes distributor pricing, same-family drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

Cotação Contato