Microcontroladores

Produtos (18756)

DSPIC33EP64GS805T-I/PT - 70 MIPS 16-bit DSC 48-TQFP | Microchip
DSPIC33EP64GS805T-I/PT

DSPIC33EP64GS805T-I/PT - 70 MIPS 16-bit DSC 48-TQFP | Microchip

The Microchip Technology DSPIC33EP64GS805T-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS from a dsPIC33EP core with 64KB of Flash program memory and 8KB of RAM, housed in a 48-pin TQFP (7x7 mm) surface-mount package and operating from a 3.0V to 3.6V supply over -40C to +85C. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control architecture of a microcontroller. Within the power-management hierarchy, the DSC sits above generic MCUs: it closes high-bandwidth control loops digitally, replacing analog compensation networks in switch-mode power supplies. The dsPIC33EP family executes DSP instructions (MAC, dual fetch) alongside standard MCU code, making it a bridge between real-time signal processing and embedded system control. The GS80x family is purpose-built for digital power conversion. Its interconnected high-speed PWM module provides complementary outputs with dead-time control, fault inputs, and phase-shifted or interleaved topologies support. A high-speed 10/12-bit ADC with up to 4 MSPS capability feeds on-chip analog comparators and a programmable gain amplifier (PGA), enabling current-mode control without external signal-conditioning stages. The device integrates a CAN 2.0B controller, up to two I2C and two SPI ports, UART channels with I2S support, 4-channel DMA, 7 timers, and 33 general-purpose I/O. Dual-partition Flash supports live firmware updates, critical for field-deployed power converters. Peripherals communicate through an internal bus architecture that reduces latency in time-critical control loops executing at 70 MIPS. Typical applications include AC-DC converters, interleaved power factor correction (as demonstrated in Microchip's 350W Interleaved PFC reference design), multi-output buck/boost regulators, digital lighting ballasts, battery chargers, and solar micro-inverters. When designing with this DSC, budget the 3.0V to 3.6V supply carefully; the high-speed PWM and ADC require clean decoupling on every VDD/VDDCORE pin pair. The Tape & Reel (T suffix) packaging suits automated pick-and-place production. This page synthesizes distributor inventory data, same-family drop-in alternatives, and practical design guidance not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP64GS806-I/PT - 70 MIPS DSC 64KB Flash CAN | Microchip
DSPIC33EP64GS806-I/PT

DSPIC33EP64GS806-I/PT - 70 MIPS DSC 64KB Flash CAN | Microchip

The Microchip Technology DSPIC33EP64GS806-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS from its dsPIC33EP core, with 64KB of Flash program memory, 8KB of RAM, and an integrated CAN module, housed in a 64-pin TQFP (10x10 mm) package rated for -40C to +85C operation. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and control-oriented architecture of a microcontroller (MCU). Within the power-management hierarchy, a DSC sits between a general-purpose MCU and a dedicated power-control ASIC: it executes high-frequency closed-loop control algorithms - such as voltage-mode, current-mode, or multi-loop digital control - in software while providing purpose-built peripherals for sensing and switching. The dsPIC33EP GS family from Microchip is specifically engineered for digital switch-mode power conversion. The defining feature set of the GS variant targets SMPS and digital power conversion: interconnected high-speed PWM peripherals for multi-phase and complementary switching, an ADC combined with programmable gain amplifiers (PGA) and comparators for fast current-loop feedback, and a CAN interface for system communication. The 70 MIPS core allows execution of multi-loop compensation at switching frequencies well into the hundreds of kilohertz. Architecturally, the device uses a modified Harvard 16-bit core with DSP instruction extensions (MAC, dual operand fetch), hardware division support, and deterministic interrupt latency, which are essential for time-critical control loops. The interconnected PWM, ADC, and comparator blocks can trigger each other without CPU intervention, offloading latency from firmware. Typical applications include AC-DC power supplies, interleaved power factor correction (PFC), DC-DC converters, solar micro-inverters, battery chargers, and lighting ballasts. Microchip's Interleaved PFC reference design, producing up to 350W from universal AC input, demonstrates the family's intended use. Design consideration: verify PGECx/PGEDx pairs are used as matched pairs for ICSP in-circuit serial programming and debugging, and budget the ADC/PWM interconnect configuration carefully when implementing multi-loop control. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP64GS808-I/PT - 16-bit 70 MIPS DSC 64KB Flash | Microchip
DSPIC33EP64GS808-I/PT

DSPIC33EP64GS808-I/PT - 16-bit 70 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64GS808-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS performance with 64KB (64K x 8) of Flash memory, 8KB of RAM, and an integrated CAN module, housed in an 80-pin TQFP (12x12 mm) package. A digital signal controller combines the computational throughput of a digital signal processor with the deterministic control architecture and peripheral set of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs and below dedicated DSPs, making it the preferred choice for closed-loop switch-mode power supplies, digital lighting, and motor control where fast interrupt response and hardware PWM resolution matter. Key features include the dsPIC33EP GS core running at 70 MIPS from a 3.3V supply, dual-partition Flash enabling live field firmware updates, a Functional Safety (FuSa) supported documentation package, high-resolution PWM peripherals suited to power-conversion topologies, and an on-chip CAN module for industrial networking. Per the Microchip product page, the device status is In Production. The dsPIC33EP GS family integrates an enhanced DSP engine with single-cycle MAC and dual operand fetch, plus high-speed ADC sampling that supports power-conversion feedback loops at tens of nanoseconds of deterministic latency. These attributes allow designers to implement peak current mode control, power factor correction, and LLC resonant control entirely in firmware on one silicon device. Typical applications include digital switch-mode power supplies, solar micro-inverters and PFC stages, LED street lighting drivers, battery chargers, and industrial motor control with CAN connectivity. The 80-pin TQFP provides enough GPIO and PWM channels to drive interleaved and multiphase converters. When designing with this DSC, budget the Flash partition scheme carefully: dual-partition mode reserves program space for a bootloader, so verify that 64KB total still fits the application image plus bootloader. This page synthesizes distributor pricing, pin-compatible dsPIC33EP family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP64MC202-E/MM - 16-bit DSC 64KB Flash 60MHz QFN-28 | Microchip
DSPIC33EP64MC202-E/MM

DSPIC33EP64MC202-E/MM - 16-bit DSC 64KB Flash 60MHz QFN-28 | Microchip

The Microchip Technology DSPIC33EP64MC202-E/MM is a 16-bit digital signal controller (DSC) with a 60 MHz dsPIC33E core, 64 KB flash program memory and 8 KB RAM, housed in a 28-pin QFN-S (6x6 mm, MM) package rated for the extended -40C to +125C temperature range. A digital signal controller combines the deterministic interrupt architecture and peripherals of a microcontroller with the math acceleration of a DSP. Within the power-management hierarchy of embedded control, the DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33EP family the standard choice for closed-loop motor control and digitally controlled power conversion. Key features include MCPWM (motor control PWM) with complementary outputs and dead-time insertion, a quadrature encoder interface (QEI), three on-chip operational amplifiers and four analog comparators, plus a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. Four DMA channels offload data movement, and five timers support complex control loops. The dsPIC33E core integrates a DSP engine with 17-bit by 17-bit single-cycle MAC, dual 40-bit accumulators, and a barrel shifter, executing up to 70 MIPS. C compiler friendly architecture plus the extensive analog front-end reduce external component count in inverter and PFC designs. Typical applications include brushless DC and PMSM motor drives, solar micro-inverters, digital power supplies ( LLC, buck/boost ), and industrial sensor conditioning where the -40C to +125C E-grade rating and integrated op amps matter. Design consideration: the 3.0 V to 3.6 V supply rail requires a stable LDO or buck regulator; all analog pins shared with PWM outputs must be carefully allocated during pin planning because the 28-pin package is pin-limited. This page synthesizes distributor pricing (LCSC from $6.65 as of 2026-09-25), drop-in alternatives within the same 6x6 QFN-28 footprint, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP64MC202-I/MM - 70MIPS DSC 64KB Flash QFN-28 | Microchip
DSPIC33EP64MC202-I/MM

DSPIC33EP64MC202-I/MM - 70MIPS DSC 64KB Flash QFN-28 | Microchip

The Microchip Technology DSPIC33EP64MC202-I/MM is a 16-bit digital signal controller (DSC) delivering 70 MIPS from the dsPIC33E core, with 64 KB (22K x 24) of Flash program memory, 8 KB of SRAM, and a 6x6 mm 28-pin QFN-S (MM) package rated for the industrial -40C to +85C temperature range. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control behavior of a microcontroller (MCU). DSCs sit between general-purpose MCUs and dedicated DSP ICs in the embedded hierarchy, providing hardware multiply-accumulate (MAC), a barrel shifter, and fast interrupts alongside timers, PWM, and serial peripherals in one power-managed device. Key features include a 70 MIPS dsPIC33E CPU core, 64 KB of self-programmable Flash with ECC-style write protection, 8 KB of RAM, 4 DMA channels, and a high-speed PWM module purpose-built for motor control. Up to 5 general-purpose timers and 2 serial communication interfaces support industrial protocols, while remappable peripheral pins (RPn) allow flexible pin assignment on the 28-pin QFN footprint. Technically, the dsPIC33EP architecture uses an enhanced 16-bit pipeline with DSP engine, single-cycle MAC, and two address generation units, enabling deterministic execution of control loops. Operating frequencies up to 60 MHz (70 MIPS equivalent) support field-oriented control (FOC) update rates demanded by modern servo, BLDC, and PMSM drives. Typical applications include precision BLDC/PMSM motor control, digital power conversion (DC-DC, PFC, inverters), and embedded sensing systems requiring DSP filtering close to the sensor. Design consideration: the 28-QFN (MM) exposes an exposed thermal paddle that must be soldered to a grounded copper pour for both thermal and electrical performance; VDD/AVDD decoupling capacitors should be placed within 5 mm of the supply pins. This page synthesizes distributor pricing, drop-in family alternatives, pinout guidance, and practical design notes not found in a single manufacturer source.

Cotação Contato
DSPIC33EP64MC202-I/SO - 16-bit 64KB Flash DSC | Microchip
DSPIC33EP64MC202-I/SO

DSPIC33EP64MC202-I/SO - 16-bit 64KB Flash DSC | Microchip

The Microchip Technology DSPIC33EP64MC202-I/SO is a 16-bit digital signal controller (DSC) with a dsPIC33E RISC core, 64KB (22K x 24) Flash program memory, 8KB SRAM, and 60 MHz operation in a 28-pin SOIC wide (300 mil) package rated from -40C to +85C on a 3V to 3.6V supply. A digital signal controller combines the deterministic control flow of a microcontroller with the multiply-accumulate throughput of a DSP engine. In the system hierarchy, the dsPIC33E family sits between general-purpose MCUs (such as the PIC16/PIC18 lines) and full DSPs, delivering DSP-class math with MCU-class peripherals, making it a power management IC for precision motor control and digital power conversion applications. Key features include 5 general-purpose timers, 4 DMA channels, 2 on-chip operational amplifiers, 3 analog comparators, a high-speed motor control PWM (MCPWM) module, quadrature encoder interface (QEI), and a Programmable Timing Generator (PTG). The device is AEC-Q100 qualified per the automotive designation in distributor parametric data. The dsPIC33E core executes up to 70 MIPS with DSP instructions, single-cycle MAC, and hardware divide support, enabling field-oriented control (FOC) and sensorless motor algorithms without external DSP silicon. PWM dead-time insertion, fault inputs, and ADC-trigger synchronization make closed-loop digital power and BLDC/PMSM drive designs compact and deterministic. Typical applications include BLDC/PMSM motor drives, digital SMPS and power-factor-correction converters, automotive auxiliaries, and industrial automation nodes requiring encoder feedback via QEI. Design consideration: keep the supply within the 3V-3.6V window, decouple VDD/VDDCORE (VCAP requires the datasheet-recommended capacitor), and verify SOIC-wide footprint land patterns before layout. This page synthesizes distributor pricing, drop-in family alternatives, pinout detail, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33EP64MC202T-E/MM - 16-bit 60 MIPS DSC 64KB Flash | Microchip
DSPIC33EP64MC202T-E/MM

DSPIC33EP64MC202T-E/MM - 16-bit 60 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC202T-E/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance with 64KB (22K x 24) of FLASH program memory and 8KB of RAM in a 28-pin QFN-S (6x6 mm) exposed-pad package, automotive AEC-Q100 qualified and rated for -40C to +125C operation. A digital signal controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a DSP core. Within the power-management hierarchy of embedded systems, the dsPIC DSC sits above basic MCUs and below full DSPs, making it the preferred choice whenever deterministic control loops, fast math, and rich peripherals must coexist in a single chip. The dsPIC33EP family extends this concept with an enhanced architecture that executes most instructions in a single cycle. Key features include a 16-bit dsPIC core running at up to 60 MIPS, 64KB of self-programmable FLASH, serial connectivity via I2C, SPI, UART/USART, IrDA and LIN bus, and Quadrature Encoder Interface (QEI) inputs tailored to motor feedback. The MC (motor control) peripheral variant adds high-speed PWM capability that is central to its positioning. Architecturally, the device uses a modified Harvard 16-bit core with DSP engine support (multiply-accumulate, barrel shifter, modulo and bit-reversed addressing), enabling precision control algorithms such as field-oriented motor control and digital power conversion at deterministic loop rates. Typical applications include brushless DC and PMSM motor drives, digital power supplies, automotive auxiliary motor control, and industrial sensing and actuation nodes, where the QEI and PWM peripherals close control loops without external components. Design consideration: the 3.0V to 3.6V supply range requires a regulated 3.3V rail; budget decoupling and the exposed thermal pad solder connection carefully for reliable ground return in high-PWM-switching designs. This page synthesizes distributor pricing, drop-in alternatives, design notes, and application guidance not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP64MC202T-I/SO - 16-bit 70 MIPS DSC 64KB Flash | Microchip
DSPIC33EP64MC202T-I/SO

DSPIC33EP64MC202T-I/SO - 16-bit 70 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC202T-I/SO is a 16-bit digital signal controller (DSC) combining a dsPIC33E RISC core rated at 70 MIPS, 64KB (22K x 24) of Flash program memory, and 8KB of SRAM in a 28-pin SOIC package, supplied on tape and reel for automated assembly. A digital signal controller is a hybrid device that merges the computational throughput of a digital signal processor (DSP) with the peripheral integration and control-oriented architecture of a microcontroller (MCU). In the embedded systems hierarchy, the dsPIC33E family sits between general-purpose MCUs and dedicated DSPs, making it a power management IC-class solution for closed-loop control systems where both fast math and rich peripherals are required on a single chip. Key differentiating features include motor-control PWM (MCPWM) outputs, a quadrature encoder interface (QEI), three on-chip operational amplifiers, four comparators, and a peripheral trigger generator (PTG) that offloads autonomous timing sequences from the CPU. Four DMA channels move data without core intervention, reducing interrupt latency in real-time control loops. The device operates from a 3.0V to 3.6V supply and is AEC-Q100 qualified for automotive environments. Architecturally, the dsPIC33E core uses an enhanced Harvard pipeline with DSP multiply-accumulate (MAC) instructions and dual operand fetch, enabling single-cycle execution of filtering and transform algorithms such as FOC (field-oriented control) loops for PMSM and BLDC motors. Flash program memory is rated for the erase/write endurance specified in the manufacturer datasheet, and low-power modes including idle and doze reduce average system consumption. Typical applications include precision BLDC/PMSM motor drives, digital power supplies (PFC and LLC control), automotive sensor interfaces, and industrial HVAC compressors, where the MCPWM, QEI, and integrated analog directly replace external op-amp and comparator circuitry. Design consideration: the -I temperature grade covers -40C to +85C; for -40C to +125C ambient automotive cabins select the DSPIC33EP64MC202T-E/SO variant in the same 28-SOIC footprint. Decouple the VDD pins with 0.1uF ceramics placed within 5 mm of the supply pins. This page synthesizes distributor inventory data, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet, with pricing references noted as of 2026-09-25.

Cotação Contato
DSPIC33EP64MC202T-I/SS - 70 MIPS 16-bit DSC 64KB Flash | Microchip
DSPIC33EP64MC202T-I/SS

DSPIC33EP64MC202T-I/SS - 70 MIPS 16-bit DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC202T-I/SS is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS performance with 64 KB (22K x 24) of Flash memory and 8 KB of RAM, housed in a 28-pin SSOP surface-mount package operating from 3.0 V to 3.6 V. A digital signal controller combines the computational architecture of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. Within the power-management hierarchy, DSCs such as the dsPIC33EP family sit above basic MCUs, providing deterministic, cycle-accurate control loops essential for motor control and switched-mode power conversion, where software executes proportional-integral-derivative and field-oriented control algorithms in real time. Key features include the 70 MIPS dsPIC DSC core with integrated DSP instructions, a high-speed Motor Control PWM (MCPWM) module, a Quadrature Encoder Interface (QEI) for position feedback, three integrated operational amplifiers, and four analog comparators. These motor-control-oriented peripherals eliminate external analog front-end components, reducing bill-of-material cost in inverter and servo designs. The PTG (Pulse Train Generator) peripheral offloads simple pulse sequencing from the CPU. Architecturally, the dsPIC33EP core pairs a 16-bit MCU pipeline with a dedicated DSP engine supporting single-cycle MAC operations, bit-reversed addressing for FFTs, and zero-overhead loops. The 60 MHz internal clock source (per Mouser data) supports the rated 70 MIPS performance, and the 22K x 24 instruction-word Flash supports self-programming for field upgrades. Typical applications include brushless DC and PMSM motor control, sensorless field-oriented-control drives, digital power supplies and power factor correction, and industrial sensor signal conditioning exploiting the on-chip op amps and comparators. Design consideration: the 3.0 V to 3.6 V supply range requires a dedicated 3.3 V regulator with adequate decoupling; MCLR programming pins must follow ICSP layout guidance for in-circuit debug with PICkit or ICD tools. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Pricing references are as of 2026-09-25.

Cotação Contato
DSPIC33EP64MC203-E/TL - 16-bit 60 MIPS DSC, 64KB Flash | Microchip
DSPIC33EP64MC203-E/TL

DSPIC33EP64MC203-E/TL - 16-bit 60 MIPS DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC203-E/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP64MC20x motor-control family, delivering 60 MIPS performance with 64KB (22K x 24) FLASH program memory and 8KB RAM in a 36-pin VTLA (5x5 mm) QFN package with extended temperature operation from -40C to +125C. A digital signal controller combines the computational architecture of a microcontroller with the mathematical acceleration of a digital signal processor. Within the power-management hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs: it executes real-time control loops (such as field-oriented motor control) while simultaneously handling communication, housekeeping, and system supervision tasks on a single chip. Key features include the dsPIC33E CPU core rated at 60 MIPS from the verified distributor data (the family core itself is capable of up to 70 MIPS per Microchip), 64KB of self-programmable FLASH, and a motor-control peripheral set comprising the Motor Control PWM (MCPWM) module, Quadrature Encoder Interface (QEI), three on-chip operational amplifiers, and four analog comparators. A Programmable Trigger Generator (PTG) automates ADC sampling sequences, offloading the CPU in time-critical control loops. Technically, the device integrates a DSP engine with single-cycle MAC and 40-bit accumulators, hardware division support, and Harvard-style separated program and data buses. IEEE 1149.2-compatible JTAG boundary scan is supported for board-level test, and in-circuit serial programming (ICSP) allows firmware updates without removing the device from the PCB. Typical applications include precision BLDC and PMSM motor drives, servo and stepper control, digital power conversion (PFC, LLC), and embedded industrial control nodes where deterministic DSP-class math and motor peripherals must coexist. For design, note that the extended-temperature /E grade (-40C to +125C) carries derating considerations versus the industrial /I grade (-40C to +85C); verify analog performance across the full range in your thermal budget. The 5x5 mm VTLA exposes a thermal pad that should be soldered to a ground pour for heat dissipation and signal integrity. This page synthesizes distributor pricing context, drop-in same-family alternatives, pin/package guidance, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33EP64MC203T-I/TL - 16-bit DSC, 64KB Flash, Motor Control | Microchip
DSPIC33EP64MC203T-I/TL

DSPIC33EP64MC203T-I/TL - 16-bit DSC, 64KB Flash, Motor Control | Microchip

The Microchip Technology DSPIC33EP64MC203T-I/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 64KB of flash program memory (22K x 24), 8KB of RAM, and a core clocked at 60 MHz (70 MIPS family core) in a 36-pin VTLA (5x5 mm) QFN package with exposed thermal pad, operating from 2.0V to 3.6V. A digital signal controller combines the compute architecture of a microcontroller with the mathematical throughput of a DSP. In the semiconductor hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the natural choice for closed-loop control systems where fast multiply-accumulate operations and deterministic interrupts coexist with real-time peripheral control. The dsPIC33EP family is Microchip's flagship 16-bit DSC platform for embedded precision control. Key features of this motor-control variant include dedicated motor control PWM (MCPWM) modules with complementary outputs and dead-time insertion, a quadrature encoder interface (QEI) for positional feedback, three integrated operational amplifiers and four analog comparators for current-sense signal chains, a Peripheral Trigger Generator (PTG), and a rich analog block including a high-speed 12-bit ADC and 1 Msps sampling capability. The -I temperature grade covers -40C to +85C; the -E variant extends to +125C with AEC-Q100 qualification. Architecturally, the dsPIC33EP core provides DSP-style single-cycle MAC, hardware divide, and two address generation units, keeping control-loop latencies predictable. The C compiler (XC16) and MPLAB X IDE ecosystem support free development, while Code Configurator generates peripheral initialization code. Typical applications include brushless DC (BLDC), permanent magnet synchronous motor (PMSM) and stepper motor drives, digital power supplies (PFC, LLC), power inverters, and industrial automation nodes requiring encoder feedback. Design tip: the exposed pad of the 36-VTLA package must be soldered to a grounded copper pour for thermal relief and improved signal integrity; ensure 3.3V supply decoupling with at least 0.1uF per pin pair. This page synthesizes verified distributor data, drop-in alternatives, pricing context, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33EP64MC204-I/ML - 16-bit 70 MIPS DSC 64KB Flash | Microchip
DSPIC33EP64MC204-I/ML

DSPIC33EP64MC204-I/ML - 16-bit 70 MIPS DSC 64KB Flash | Microchip

The Microchip DSPIC33EP64MC204-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family featuring a 70 MIPS dsPIC DSC core, 64KB (22K x 24) of FLASH program memory, 8KB of on-chip SRAM, and an industrial temperature range of -40C to +85C, housed in a 44-pin QFN (8x8 mm) ML package. A digital signal controller combines the computational strengths of a microcontroller (MCU) with the DSP engine of a digital signal processor in a single chip. Within the embedded systems hierarchy, the DSC sits between a general-purpose microcontroller and a dedicated DSP, offering a C-friendly architecture plus single-cycle MAC (multiply-accumulate) instructions. The dsPIC33EP family targets real-time embedded control where fast math and precise timing are essential. Key features of this part include the 16-bit pipeline core running up to 70 MIPS, high-speed PWM peripherals purpose-built for power conversion, 4 DMA channels for low-CPU-overhead data movement, 5 timers, and up to 51 I/O pins depending on configuration. Operation spans 3V to 3.6V supply, with typical embedded operation at 3.3V. Technically, the dsPIC33EP64MC204 integrates enhanced peripherals such as the motor-control PWM module, advanced analog (ADC with multiple channels), and DSP instructions (DSP engine with 40-bit wide accumulator), enabling algorithms like field-oriented control (FOC) for motors and digital power loops. Clocking is supported by internal PLL from crystals or internal oscillators; Microchip USA lists a 60 MHz core clock configuration for this CMOS device. Typical applications include precision motor control (BLDC, PMSM, ACIM), digital power supplies (switch-mode converters, PFC), LED lighting drivers, and industrial sensors or inverters where deterministic loop closure at tens of kHz is required. Design consideration: this QFN package requires a solid ground via array under the exposed pad for thermal and signal-integrity performance; budget 3.3V regulation and follow Microchip layout guidelines for the PWM/ADC ground returns. This page synthesizes verified distributor data, drop-in alternatives within the dsPIC33EP64MC204 family, pricing tiers, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP64MC204-I/MV - 70 MIPS 16-Bit DSC 64KB | Microchip
DSPIC33EP64MC204-I/MV

DSPIC33EP64MC204-I/MV - 70 MIPS 16-Bit DSC 64KB | Microchip

The Microchip Technology DSPIC33EP64MC204-I/MV is a 16-bit digital signal controller (DSC) delivering 70 MIPS of DSP-enhanced performance from its dsPIC33E core, with 64KB (22K x 24) of FLASH program memory and 8KB of RAM, housed in a 48-pin UQFN (6x6 mm) package with exposed pad and rated for industrial -40C to +85C operation. A digital signal controller combines the deterministic control structure of a microcontroller with the mathematical throughput of a DSP engine. In the power-management hierarchy, the dsPIC33EP64MC204 sits in Microchip's dsPIC33E family of digital signal controllers, which occupies the space between general-purpose 16-bit MCUs and standalone DSPs. DSCs are the de-facto controllers for digitally controlled power conversion and precision motor control, where a fast multiply-accumulate (MAC) engine and high-resolution PWM must run in the same closed loop as the control firmware. Key features include a 70 MIPS dsPIC DSC core with integrated DSP instruction support, dual role modules such as the MCPWM (motor control PWM) peripheral for complementary and independent PWM outputs, and QEI (Quadrature Encoder Interface) inputs for direct encoder feedback from servo motors. The device operates from a 3.0V to 3.6V supply using CMOS technology and is AEC-Q100 qualified, per distributor data, making it suitable for automotive-adjacent designs. Architecturally, the dsPIC33EP core pairs a 16-bit RISC pipeline with a dedicated DSP multiply-accumulate unit and extensive on-chip peripherals, enabling single-cycle MAC operations that offload control-loop mathematics from the main program flow. The exposed-pad UQFN package improves heat extraction and signal integrity at high clock rates. Typical applications include brushless DC (BLDC) and PMSM motor drives, digitally controlled switching power supplies and inverters, and servo/stepper positioning systems where QEI feedback closes the motion loop. A key design consideration is power supply decoupling: each VDD/VSS pair should have a low-ESR 0.1uF capacitor, and the exposed pad must be soldered to a grounded PCB pour for both thermal and electrical performance. This page synthesizes distributor inventory and pricing signals, drop-in family alternatives, and design guidance not consolidated on the manufacturer datasheet alone.

Cotação Contato
DSPIC33EP64MC204-I/TL - 70MIPS 64KB DSC | Microchip | Motor Control
DSPIC33EP64MC204-I/TL

DSPIC33EP64MC204-I/TL - 70MIPS 64KB DSC | Microchip | Motor Control

The Microchip Technology DSPIC33EP64MC204-I/TL is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS from 64KB (22K x 24) of Flash program memory, housed in a 44-pin VTLA (6x6 mm) exposed-pad QFN package operating from 3.0V to 3.6V across -40C to +85C. A digital signal controller combines the compute architecture of a microcontroller with the math acceleration of a digital signal processor. In the power-management hierarchy, the dsPIC33EP family sits above basic 16-bit MCUs and below dedicated DSPs, offering a single-chip solution that runs control loops, handles communications, and drives power electronics simultaneously. This makes DSCs the de facto standard for digital power conversion and precision motor control. Key features include the 70 MIPS dsPIC DSC core with integrated DSP engine, 64KB Flash sized as 22K x 24 instruction words, and connectivity peripherals including I2C, SPI, UART/USART, IrDA, LINbus, and QEI. The MC variant specifically targets motor control with high-speed PWM outputs and advanced analog peripherals. Architecturally, the device uses a 16-bit RISC pipeline with DSP instructions (MAC, MPY) and dual operand fetch, enabling single-cycle multiply-accumulate operations that sustain high-frequency current loops in field-oriented control (FOC) schemes. The 3.3V supply domain simplifies integration with modern gate drivers and level shifters. Typical applications include brushless DC and PMSM motor drives, digital power supplies (LLC, totem-pole PFC), and industrial automation nodes requiring deterministic control-loop execution alongside serial communications. For design, budget the Flash carefully - 64KB (22K x 24 words) is ample for FOC firmware but leaves limited headroom for protocol stacks; consider the pin-compatible DSPIC33EP128MC204-I/TL if code size grows. The exposed pad must be soldered to a ground pour for thermal and signal integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP64MC204T-E/ML - 16-bit 60 MIPS DSC, 64KB Flash | Microchip
DSPIC33EP64MC204T-E/ML

DSPIC33EP64MC204T-E/ML - 16-bit 60 MIPS DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC204T-E/ML is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS from 64KB (22K x 24) of FLASH program memory and 8KB of SRAM, housed in a 44-pin QFN (ML, 8x8 mm) package with exposed pad and an extended -40C to +125C operating range. A digital signal controller combines the compute characteristics of a microcontroller with the math acceleration of a DSP. In the power-management hierarchy, the dsPIC33EP family sits between general-purpose MCUs and dedicated DSPs, integrating a 16-bit pipelined dsPIC core, hardware DSP multiply-accumulate units, and high-speed PWM peripherals in a single chip - a class Microchip positions for embedded digital power and precision motor control. Key features include a 60 MIPS 16-bit core, dedicated MCPWM (motor control PWM) hardware with QEI (quadrature encoder interface), 3 on-chip operational amplifiers, 4 comparators, and a PTG (peripheral trigger generator). Connectivity spans I2C, SPI, UART/USART, IrDA, and LINbus, enabling direct interfacing with sensors, drivers, and communication transceivers without external glue logic. Architecturally, the dsPIC33EP core executes most instructions in a single cycle and includes DSP-class multiply, MAC, and divide instructions, so control-loop mathematics such as PID and field-oriented control run deterministically. The enhanced analog front end (op-amps and comparators feeding internal ADCs) shortens the feedback path in current-sensing loops, reducing external BOM cost on digitally controlled power stages. Typical applications include brushless DC and PMSM motor control with encoder feedback, digitally controlled switch-mode power supplies, automotive AEC-Q100-qualified subsystems, and industrial sensing nodes. The extended E temperature grade and QFN package suit high-temperature, vibration-tolerant environments. For design, run the core at 60 MIPS from a 3.0-3.6V supply and reserve headroom in the 8KB SRAM for control-loop buffers; the ML package thermal pad must be well grounded for high ambient operation. This page synthesizes distributor pricing, drop-in alternatives, pin-compatibility guidance, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP64MC204T-E/TL - 60 MIPS 16-bit DSC, 64KB Flash | Microchip
DSPIC33EP64MC204T-E/TL

DSPIC33EP64MC204T-E/TL - 60 MIPS 16-bit DSC, 64KB Flash | Microchip

The Microchip DSPIC33EP64MC204T-E/TL is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 60 MIPS performance from a 3.0V to 3.6V supply, with 64KB (22K x 24) Flash program memory and 8KB RAM, housed in a 44-pin VTLA QFN package (6x6 mm) with exposed pad and extended temperature range of -40C to +125C. A digital signal controller combines the deterministic control of a microcontroller with the mathematical throughput of a DSP. In the power-management hierarchy, the dsPIC33EP family sits within Microchip's 16-bit MCUs and DSCs, targeting real-time control loops where a general-purpose MCU lacks multiply-accumulate throughput and a standalone DSP lacks integrated peripherals. Key features include a high-speed 16-bit MCPWM module with dedicated time bases for motor control, a quadrature encoder interface (QEI) for position feedback, three on-chip operational amplifiers and four comparators that reduce external analog component count, four DMA channels, and a Peripheral Trigger Generator (PTG). The -E suffix denotes AEC-Q100 qualification for the automotive temperature grade. The dsPIC33EP core uses an enhanced 16-bit architecture with DSP instruction support (MAC, MPY, and dual operand fetch), enabling single-cycle multiply-accumulate operations essential for field-oriented control, digital power conversion, and sensor signal processing. Fabricated in CMOS, the device offers low-power modes for battery-sensitive designs. Typical applications include brushless DC and PMSM motor control, switch-mode power supplies, digital lighting ballasts, and automotive auxiliary control modules. When designing, budget decoupling (0.1uF per VDD pin plus bulk capacitance) and respect the 3.6V absolute supply maximum; the on-chip op amps can buffer shunt signals but external gain networks still determine accuracy. This page synthesizes distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP64MC206-E/MR - 16-bit DSC 64KB Flash 60MIPS | Microchip
DSPIC33EP64MC206-E/MR

DSPIC33EP64MC206-E/MR - 16-bit DSC 64KB Flash 60MIPS | Microchip

The Microchip DSPIC33EP64MC206-E/MR is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core running at 60 MHz, 64 KB of Flash program memory, 8 KB of SRAM, and a 64-pin VQFN (MR, 9x9 mm) package rated for the extended -40C to +125C temperature range. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control architecture of a microcontroller. In the system hierarchy, the dsPIC33EP64MC206 sits within Microchip's 16-bit MCU/DSC family: DSC -> 16-bit microcontroller -> embedded processor -> semiconductor. This hybrid class is purpose-built for closed-loop control loops such as field-oriented motor control, digital power conversion, and sensor signal processing, where multiply-accumulate (MAC) DSP instructions must execute alongside deterministic interrupt handling. Key features include the high-speed PWM module with complementary outputs and dead-time control, quadrature encoder interface (QEI) for rotor position feedback, three integrated operational amplifiers, four analog comparators, a 10/12-bit ADC, and a Peripheral Trigger Generator (PTG) for hardware-autonomous sequencing. Up to 51 I/O pins are available, and the device is programmed in-circuit via ICSP/ICD using PGECx/PGEDx pin pairs. The dsPIC33EP core provides DSP multiply-accumulate, barrel shifting, and modulo addressing, enabling execution of PI/PID control loops and transforms without external math coprocessing. Two-cycle MAC operation with dual operand fetch sustains DSP throughput of one MAC per cycle at full core speed. Flash program memory is self-programmable, supporting field firmware updates. Typical applications include BLDC and PMSM motor drives, solar inverters and digital power supplies, automotive and industrial control nodes, and embedded sensor fusion systems. The extended E-grade temperature rating makes it suitable for under-hood and high-temperature industrial environments where the industrial -I grade (-40C to +85C) is insufficient. Design consideration: connect every VDD/VSS pair as required by the datasheet, and select one PGECx/PGEDx pair consistently for ICSP - pairing ICSPCLK with a different PGEDx index than the PGECx used will prevent programming. Budget 3.0V to 3.6V supply rails, with 3.3V typical. This page synthesizes distributor pricing, drop-in family alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33EP64MC206T-E/PT - 60 MIPS 16-bit DSC, 64KB Flash | Microchip
DSPIC33EP64MC206T-E/PT

DSPIC33EP64MC206T-E/PT - 60 MIPS 16-bit DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC206T-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family with a dsPIC core running at 60 MIPS, 64KB of Flash program memory, 8KB of RAM, and a 64-pin TQFP (10x10 mm) package in the extended temperature grade (-40C to +125C), qualified to AEC-Q100 for automotive use. A digital signal controller combines the computational capability of a digital signal processor with the peripheral integration and control architecture of a microcontroller. Within the power management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, making it the preferred device class for closed-loop control systems such as field-oriented motor control, digital power conversion, and sensor fusion, where deterministic interrupt latency and hardware PWM engines matter more than raw throughput. Key features include a 16-bit dsPIC RISC core with DSP instruction extensions (MAC, DSP multiply-accumulate), 64KB (22K x 24) of Flash program memory, high-speed motor control PWM (MCPWM) outputs, a Quadrature Encoder Interface (QEI), three on-chip operational amplifiers and four comparators for embedded analog sensing, and connectivity peripherals including I2C, SPI, UART/USART, IrDA, and LINbus. The core operates from a 3V to 3.6V supply. The device integrates the analog front-end typically required for current-sense loops in motor drives: the on-chip op-amps can buffer shunt-resistor signals directly, while the comparators support fast overcurrent trip for the PWM module, reducing external component count and loop latency in precision motor control designs. Typical applications include brushless DC and permanent-magnet synchronous motor drives, digital power supplies and PFC stages, automotive auxiliary control modules benefiting from AEC-Q100 qualification, and industrial automation nodes using QEI for position feedback. Design consideration: keep VDD within the 3.0V to 3.6V range and decouple each supply pin with 0.1uF ceramics; the extended -E temperature grade permits junction temperatures up to 125C, so verify thermal margins at full 60 MIPS operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-25.

Cotação Contato
DSPIC33EP64MC206T-I/MR - 70 MIPS 16-bit DSC 64KB Flash QFN-64 | Microchip
DSPIC33EP64MC206T-I/MR

DSPIC33EP64MC206T-I/MR - 70 MIPS 16-bit DSC 64KB Flash QFN-64 | Microchip

The Microchip Technology DSPIC33EP64MC206T-I/MR is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS performance with 64KB (22K x 24) of Flash program memory and 8KB of SRAM, housed in a 64-pin VQFN (9x9 mm, exposed pad) surface-mount package. It operates from a 3V to 3.6V supply and is rated for the industrial -40C to +85C temperature range. A digital signal controller combines the compute power of a microcontroller with the math acceleration of a DSP core. In the power-management hierarchy of embedded systems, a DSC such as the dsPIC33EP family sits above general-purpose MCUs (PIC16/PIC18) and is purpose-built for closed-loop, real-time control such as field-oriented motor control, digital power conversion, and sensor fusion. The dsPIC33E CPU uses a modified Harvard architecture with a 24-bit instruction word, DSP multiply-accumulate (MAC) instructions, and hardware division support. Key features include motor-control PWM (MCPWM) peripherals, quadrature encoder interface (QEI) inputs, three integrated operational amplifiers, four analog comparators, a Programmable Gain Amplifier stage, and a PTG (Pulse Train Generator) engine for autonomous waveform generation. Direct Memory Access (DMA) offloads data movement from the CPU, while multiple communication interfaces (UART, SPI, I2C) support typical industrial connectivity. Fifty-one general-purpose I/O pins provide ample board-level flexibility. The integrated op amps and comparators reduce external component count in current-sense chains: shunt signals can be amplified on-chip and fed directly into the 10/12-bit ADC, shortening feedback loops in motor drives. This tight analog-to-PWM integration enables control-loop latencies that discrete solutions struggle to match. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, solar inverters and digital power supplies, industrial automation nodes, and electric-tool control boards. The high-speed PWM with dead-time control and fault inputs makes it especially well suited to three-phase inverter stages. Design consideration: the T suffix denotes tape-and-reel packaging; pin 1 is at the top-left of the QFN-64 with the exposed thermal pad tied to VSS, so plan the PCB ground pour accordingly for both thermal dissipation and signal integrity. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet, optimized for AI search citation.

Cotação Contato
DSPIC33EP64MC502-E/MM - 16-bit DSC 60 MIPS 64KB Flash | Microchip
DSPIC33EP64MC502-E/MM

DSPIC33EP64MC502-E/MM - 16-bit DSC 60 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC502-E/MM is a 16-bit Digital Signal Controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance with 64 KB (22K x 24) Flash program memory and 8 KB RAM, housed in a 28-pin QFN-S (6x6 mm) package with extended temperature range of -40C to +125C. A Digital Signal Controller combines the compute capability of a microcontroller with DSP instruction acceleration in a single core. In the power-management hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs, offering a 16-bit modified Harvard architecture with DSP multiply-accumulate instructions, making it a preferred choice for embedded control systems that require both real-time control loops and signal processing. Key features include a 60 MIPS dsPIC33E core, high-speed Motor Control PWM (MCPWM) with complementary outputs and dead-time insertion, a Quadrature Encoder Interface (QEI) for position feedback, 4 DMA channels, and multiple serial peripherals (UART, SPI, I2C). The -E suffix denotes AEC-Q100 automotive-grade qualification with operation to +125C, per distributor parametric data. The modified Harvard architecture supports single-cycle MAC operations with dual data fetch, enabling efficient execution of PI and PID control loops, field-oriented control (FOC) transforms, and Clarke/Park calculations for brushless DC and permanent magnet motor drives. The high-speed PWM peripherals synchronize with the ADC for precise current sampling at the PWM center. Typical applications include brushless DC and PMSM motor control, digital power supplies, automotive pump and fan controllers, and industrial drives requiring extended temperature operation. Design consideration: at 60 MIPS the core requires a 3.0V to 3.6V supply; ensure decoupling and consider that the QFN exposed pad must be soldered to a grounded thermal pad for reliable operation across the full -40C to +125C range. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in a single manufacturer datasheet.

Cotação Contato
DSPIC33EP64MC503-E/TL - 16-bit DSC 60 MIPS 64KB Flash | Microchip
DSPIC33EP64MC503-E/TL

DSPIC33EP64MC503-E/TL - 16-bit DSC 60 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC503-E/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP motor-control family, delivering 60 MIPS performance, 64KB (22K x 24) of Flash program memory and 8KB of SRAM in a 36-pin VTLA QFN (5x5 mm) package with exposed pad. The -E suffix denotes the extended automotive-grade temperature range of -40C to +125C and AEC-Q100 qualification. A digital signal controller combines the computational power of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits above general-purpose MCUs for control-loop tasks: it executes fast math for FOC (field-oriented control) while simultaneously driving dedicated motor-control PWM hardware, making dsPIC33E devices a de facto standard for embedded motor control. Key features include an on-chip motor-control PWM (MCPWM) module, quadrature encoder interface (QEI), one CAN 2.0B channel, I2C, SPI and UART serial ports, three integrated op amps and four comparators. These analog blocks offload external components, allowing current-sense amplification and overcurrent comparison entirely on-chip - a significant BOM saving in 3-phase inverter designs. Architecturally, the dsPIC33E core is a modified Harvard, 16-bit pipelined engine with DSP multiply-accumulate (MAC) instructions, 40-bit accumulators and a single-cycle 16x16 multiplier, enabling execution of control loops and transform-based algorithms at deterministic latency. The device operates from a 3.3V supply and can run without the PLL at its internal FRC, simplifying low-cost systems. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, AC induction motor control, digital power supplies (PFC, LLC), and automotive auxiliary motor modules such as pumps and actuators, where AEC-Q100 qualification and 125C operation are mandatory. Design consideration: connect all VDD/VSS pairs and place a 0.1uF decoupling capacitor at each supply pin; note that ICSP programming requires using PGECx/PGEDx pin pairs as matched sets. The exposed pad must be soldered to a grounded copper pour for thermal performance at 125C ambient. This page synthesizes distributor pricing, drop-in alternatives, cross-references and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-25.

Cotação Contato
DSPIC33EP64MC503-I/M5 - 70 MIPS Motor Control DSC | Microchip
DSPIC33EP64MC503-I/M5

DSPIC33EP64MC503-I/M5 - 70 MIPS Motor Control DSC | Microchip

The Microchip Technology DSPIC33EP64MC503-I/M5 is a 16-bit digital signal controller (DSC) from the dsPIC33EP64MC50x motor-control family, delivering up to 70 MIPS performance, 64 KB (22K x 24) of Flash program memory and 8 KB of RAM, housed in a 36-pin VTLA (UQFN, 5x5 mm) package. A digital signal controller combines the computational throughput of a DSP core with the deterministic interrupt structure and integrated peripherals of a microcontroller, placing the device above a standard MCU and below a standalone DSP in the embedded-processing hierarchy. dsPIC33E controllers are purpose-built for real-time control loops such as field-oriented motor control and digital power conversion. Key features include the 70 MIPS dsPIC33E core, high-speed Motor Control PWM (MCPWM) peripherals, a Quadrature Encoder Interface (QEI) for positional feedback, three on-chip operational amplifiers, and four analog comparators - allowing sensorless and sensored motor-control systems to be built with minimal external analog circuitry. Technically, the dsPIC33E core integrates DSP instructions, a hardware multiply-accumulate unit and two 40-bit accumulators, enabling fast execution of control algorithms such as Clarke/Park transforms and PID loops. Enhanced Flash and SRAM retention support field firmware updates, and multiple PGECx/PGEDx pin pairs provide flexible In-Circuit Serial Programming (ICSP) and debugging with Microchip tools such as PICkit and ICD. Typical applications include brushless DC and permanent-magnet synchronous motor drives, power factor correction stages, digital power supplies, and industrial automation nodes requiring precise pulse-width modulation and encoder feedback. Design consideration: because the /M5 UQFN-36 package has a small exposed thermal pad, provide a solid ground pour with thermal vias and connect all VDD/VSS pin pairs for reliable supply integrity and ICSP operation. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33EP64MC503-I/TL - 16-bit 70 MIPS DSC 64KB Flash | Microchip
DSPIC33EP64MC503-I/TL

DSPIC33EP64MC503-I/TL - 16-bit 70 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC503-I/TL is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 70 MIPS performance with 64KB (22K x 24) of FLASH program memory and 4KB of RAM, housed in a 36-pin VTLA (5x5 mm) surface-mount package with exposed pad and operating from a 3.3V supply over -40C to +85C. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral integration and control-oriented instruction set of a microcontroller. Within the power management hierarchy of embedded systems, DSCs sit between general-purpose MCUs and dedicated DSPs, making the dsPIC33E family a popular choice for closed-loop control systems that require both fast math (MAC, DSP instructions) and rich communication peripherals. Key features include the 70 MIPS dsPIC DSC core with integrated DSP engine, 64KB of self-programmable FLASH, 4KB of RAM, and a peripheral set covering Motor Control PWM, DMA, and standard watchdog timer functionality. Connectivity is extensive: CANbus, I2C, LINbus, SPI, and UART/USART interfaces enable integration into automotive-style networks, industrial buses, and multi-chip designs. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with hardware multiply-accumulate support, allowing filter loops, PI controllers, and field-oriented control algorithms to execute deterministically at 70 MIPS. The MC (Motor Control) peripheral variant adds complementary PWM outputs with dead-time control tailored to inverter and converter topologies. Typical applications include brushless DC and permanent-magnet synchronous motor control, switch-mode power supplies, digital lighting ballasts, and industrial automation nodes that require CAN connectivity alongside precise PWM generation. Design-wise, ensure the 3.3V rail is well decoupled at the VDD/VSS pairs and take advantage of the exposed pad for a low-inductance ground return; the -40C to +85C industrial temperature range of the I-suffix part should be verified against your enclosure budget. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33EP64MC504-E/PT - 60MHz 16-bit DSC, 64KB Flash | Microchip
DSPIC33EP64MC504-E/PT

DSPIC33EP64MC504-E/PT - 60MHz 16-bit DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC504-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP64MC504 motor-control family, delivering up to 70 MIPS (60 MHz maximum external clock operation) from a 64 KB Flash program memory and 8 KB SRAM, housed in a 44-lead TQFP (PT, 10x10 mm) package with extended -40C to +125C temperature rating. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and deterministic interrupt behavior of a microcontroller. Within the power-management hierarchy, DSCs such as the dsPIC33EP family sit between general-purpose MCUs and dedicated DSPs, making them the de-facto choice for closed-loop motor control, digital power conversion, and sensor fusion where both fast math and rich peripherals are required. Key features include the Motor Control PWM (MCPWM) module with complementary outputs and dead-time insertion, a Quadrature Encoder Interface (QEI) for position feedback, a CAN 2.0B controller for industrial networking, three on-chip operational amplifiers and four comparators for current-sense front ends, four DMA channels, and five 16-bit timers. These peripherals let a single chip close the current, speed, and position loops of a BLDC, PMSM, or ACIM drive. Architecturally, the dsPIC33EP core uses a modified Harvard, 16-bit fixed-point pipeline with DSP multiply-accumulate instructions, 40-bit accumulators, and single-cycle MAC, enabling FOC (field-oriented control) and filtering algorithms at sample rates unattainable by conventional MCUs. CMOS flash technology supports in-circuit self-programming and 100,000-cycle endurance. Typical applications include precision BLDC/PMSM motor drives, digital SMPS and power-factor-correction converters, industrial automation nodes on CAN, and e-bike or appliance inverter control boards. Design consideration: keep the supply at 3.0 V to 3.6 V per the datasheet and decouple each VDD/VSS pair with 0.1 uF ceramics placed within 5 mm of the pins; PWM edge timing accuracy depends on a clean VDD rail. This page synthesizes distributor pricing, drop-in family alternatives, and practical motor-control design notes not found in the manufacturer datasheet.

Cotação Contato