Microcontroladores

Produtos (19.000+)

M031BTYE3AN - 48MHz Cortex-M0 MCU 128KB Flash QFN-48 | Nuvoton
M031BTYE3AN

M031BTYE3AN - 48MHz Cortex-M0 MCU 128KB Flash QFN-48 | Nuvoton

The Nuvoton M031BTYE3AN is a 32-bit Arm Cortex-M0 microcontroller from the NuMicro M031BT series, running at up to 48 MHz with 128 KB flash memory and 16 KB SRAM, housed in a 48-pin QFN (5x5 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripheral functions into one chip, forming the computational heart of embedded systems. Within the power management hierarchy of embedded design, MCUs such as this sit at the system level: a Cortex-M0 core executes application firmware, while integrated peripherals (timers, UART, SPI, I2C, ADC, PWM) interface directly with sensors, actuators, and communication modules. The M031BT series additionally supports Bluetooth-connectivity system designs where a low-power host MCU coordinates a wireless module. Key features of the M031BTYE3AN include the Arm Cortex-M0 processor core running up to 48 MHz, delivering efficient 32-bit processing with deterministic interrupt response for real-time control. The 128 KB flash memory accommodates substantial application code and OTA-style update schemes, while 16 KB SRAM provides working data storage. A dedicated 512-byte SPROM (Security Protection ROM) safeguards sensitive code or keys, and ISP/ICP/IAP programming modes allow in-system, in-circuit, and in-application flash updates without removing the device from the board. The clocking architecture supports a 4 to 32 MHz HXT (high-speed external crystal) oscillator or external clock sources, with internal oscillators available as fallbacks, giving designers flexibility in cost-versus-accuracy trade-offs. The operating voltage range of 1.8V to 3.6V suits battery-powered and low-voltage interface applications. According to Nuvoton, the NuMicro M031/M032 series targets mobile devices, peripheral controllers, IoT sensor nodes, motor control, industrial control, and consumer applications. Typical applications include IoT sensor devices where the 48 MHz Cortex-M0 core manages acquisition and preprocessing while a Bluetooth module handles wireless links; industrial control nodes requiring flash-based field updates via ISP/IAP; and consumer appliance control boards leveraging the compact 5x5 mm QFN-48 footprint. A key design consideration: keep the supply within the specified 1.8V to 3.6V window and use decoupling capacitors close to each supply pin; flash programming via IAP requires careful sector planning to avoid erasing running code. This page synthesizes distributor availability data, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
M30281F6 - 16-bit M16C MCU 48KB Flash 24MHz 64-LQFP | Renesas
M30281F6

M30281F6 - 16-bit M16C MCU 48KB Flash 24MHz 64-LQFP | Renesas

The Renesas M30281F6 (M30281F6HP#U5B variant) is a 16-bit single-chip microcomputer belonging to the M16C/Tiny Series of the M16C Family, housed in a 64-pin LQFP package. It integrates 48KB of Flash program memory, 4KB of RAM, and operates from a 3.0V to 5.5V supply with a maximum CPU clock of 24MHz, targeting automotive and industrial embedded control applications. The M16C architecture uses a CISC instruction set and includes an internal oscillator, on-chip debug, multiple timers, a 10-bit A/D converter, and a rich set of serial interfaces (UART, I2C, SSI). Built on Renesas' mature M16C/Tiny platform, it offers low power consumption, high code density (RISC-like code efficiency despite CISC ISA), and excellent EMI/ESD immunity. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), working memory (RAM), and a programmable set of peripherals such as timers, communication controllers, and analog interfaces. The M16C family sits in the 16-bit microcontroller hierarchy: MCU -> 16-bit MCU -> CISC MCU -> M16C architecture -> M16C/Tiny Series. Compared to 8-bit MCUs, 16-bit parts like the M30281F6 deliver higher arithmetic precision and richer peripherals; compared to 32-bit ARM Cortex-M parts, M16C offers smaller code size per function and lower cost at equivalent peripheral counts. Key differentiating features of the M30281F6 include the M16C CISC core with multi-cycle instruction execution that maximizes Flash efficiency, 55 programmable I/O pins, an internal oscillator that eliminates external clock components, and automotive-grade qualification of the underlying silicon process. The device supports up to 20MHz external oscillator input and offers sleep/stop low-power modes critical for battery-powered or automotive quiescent-current designs. Typical applications include automotive body controllers (BCM, lighting modules, mirror/door/window controllers), HVAC fan/valve controllers, small industrial sensor signal conditioners, white-goods control boards, and consumer devices that benefit from 16-bit math, large Flash, and 5V-tolerant I/O. The wide 3V-5.5V supply range lets designers use the same part across 3.3V and legacy 5V systems without level shifters. When designing with this MCU, ensure your toolchain supports the M16C core (Renesas NC30/WF, IAR M16C, or KPIT GNU); pin-compatible alternatives are typically other M3028x family members. A common design pitfall is exceeding the 5.5V absolute-maximum on any pin, which can permanently damage the part. This page consolidates distributor pricing, drop-in pin-compatible alternatives, and design notes that go beyond the manufacturer datasheet, giving engineers a faster path to qualification and second-source decisions.

Cotação Contato
M30281F6HP#U3B - 16-bit 20MHz M16C/Tiny MCU 48KB Flash | Renesas
M30281F6HP#U3B

M30281F6HP#U3B - 16-bit 20MHz M16C/Tiny MCU 48KB Flash | Renesas

The Renesas Electronics M30281F6HP#U3B is a 16-bit single-chip microcontroller from the M16C/60 M16C/Tiny/28 series, providing 48 KB of Flash program memory, 4 KB of RAM, and 55 I/O pins. The device operates from a 2.7 V to 5.5 V supply and runs at a 20 MHz internal oscillator speed. It is housed in a 64-pin LQFP package (64-LFQFP, 10x10 mm). A microcontroller (MCU) is a single integrated circuit containing a CPU core, memory, and programmable peripherals designed for embedded control. The M16C family belongs to the CISC (Complex Instruction Set Computer) class of 16-bit microcontrollers and is part of Renesas's M16C/Tiny sub-series optimized for low-power industrial and consumer applications. The M16C/Tiny architecture is a streamlined variant of the full M16C/60 platform and sits within the broader Renesas MCU hierarchy: M16C/Tiny -> M16C/60 -> M16C -> 16-bit MCU -> embedded microcontroller. Key features of the M30281F6HP#U3B include 48 KB Flash with 4 KB on-chip RAM, an internal oscillator, a 10-bit A/D converter, multiple timers, and a variety of serial interfaces (UART, I2C-bus-compatible, SPI). The 55 I/O lines support extensive peripheral integration. Industrial temperature grade (-40C to +85C) and Pb-free packaging suit factory and appliance designs requiring long-term reliability. The architecture uses an enhanced M16C CPU core that delivers deterministic interrupt response, low power consumption, and a rich instruction set with signed multiply/divide. Built-in power management modes, including HALT and STOP, enable low standby current for battery or energy-constrained designs. Typical applications include industrial control (PLCs, inverters, motor drivers), home appliances (washing machines, microwave ovens, air conditioners), office automation (printers, scanners), and automotive body electronics. The wide 2.7 V to 5.5 V operating range simplifies integration with both 3.3 V and 5 V sensors and actuators. When designing with this MCU, allocate sufficient decoupling (0.1 uF plus bulk) near each VCC/VSS pair, and reserve the dedicated oscillator pins for an external crystal if higher timing accuracy is required. Designers should also budget Flash endurance of 100 erase/write cycles minimum. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the M30281F6HP#U3B that are not found in the manufacturer datasheet alone, supporting faster component selection and BOM decisions.

Cotação Contato
M30281F6HP#U5B - 16-Bit M16C/Tiny MCU, 48KB Flash | Renesas
M30281F6HP#U5B

M30281F6HP#U5B - 16-Bit M16C/Tiny MCU, 48KB Flash | Renesas

The Renesas M30281F6HP#U5B is a 16-bit CISC microcontroller from the M16C/60 family (M16C/Tiny series, group 28) running at 20 MHz, with 48KB on-chip Flash and 4KB RAM, housed in a 64-pin LQFP (PLQP0064KB-A) package measuring 10x10 mm. It operates from a single 2.7 V to 5.5 V supply, supports 55 programmable I/O lines, and integrates an internal oscillator plus a 3-phase PWM timer, 16-bit timers, an IEBus controller, and a 10-bit A/D converter. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. The M16C family is a 16-bit CISC architecture originally developed by Mitsubishi Electric and now maintained by Renesas. Within the broader taxonomy, MCUs sit inside the semiconductor hierarchy as programmable logic devices, distinct from fixed-function ASICs. The M16C/Tiny sub-family emphasizes low power consumption, high code density (compact instruction set), and a wide operating voltage range suitable for both 3.3 V and 5 V designs. Key features of the M30281F6HP#U5B include 48 KB of Flash program memory, 4 KB of RAM, an internal oscillator that eliminates external clock hardware in cost-sensitive designs, and 55 I/O pins for moderate peripheral integration. Built-in peripherals include a 3-phase PWM timer for motor control, an IEBus (Inter-Equipment Bus) controller for in-vehicle networking, multiple 16-bit timers, and a 10-bit ADC. The wide 2.7 V to 5.5 V supply range lets the same part serve 3.3 V logic and legacy 5 V analog subsystems. Typical applications for the M30281F6HP#U5B include automotive body controllers (door modules, mirror control, wiper control), small appliance motor drivers (fan, pump, small BLDC), industrial sensor signal conditioners, and HVAC actuator controllers. The 3-phase PWM output is particularly useful for sensorless or hall-sensor brushless DC motor drives where deterministic real-time response is needed. When designing with this MCU, allocate the 48 KB Flash budget for application code plus a small bootloader, leaving 4 KB of RAM for stack, heap, and peripheral buffers. Use the internal oscillator for BOM savings but switch to an external crystal when CAN or UART timing accuracy is required. The IEBus peripheral requires proper bus arbitration and termination per the IEBus standard. This page synthesizes distributor stock, parametric position within the M16C family, and design notes not collected in the manufacturer datasheet alone, helping engineers evaluate the M30281F6HP#U5B for both new designs and legacy M16C platform migrations.

Cotação Contato
M30281F6HP#U9B - 16-bit M16C/Tiny MCU 48KB Flash 64-LQFP | Renesas
M30281F6HP#U9B

M30281F6HP#U9B - 16-bit M16C/Tiny MCU 48KB Flash 64-LQFP | Renesas

The Renesas Electronics M30281F6HP#U9B is a 16-bit single-chip microcontroller from the M16C family, M16C/Tiny/28 series, delivering 20 MHz CPU performance with 48 KB of on-chip flash program memory and 4 KB of RAM in a 64-pin LQFP package. The device operates from 3 V to 5 V supplies (3/5 V dual-supply compatible) and provides 55 general-purpose I/O lines, internal oscillator, and on-chip peripherals including timers, serial interfaces, A/D converter, and a DMA controller suitable for automotive and industrial embedded applications. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash/ROM), working memory (RAM), and peripheral blocks such as timers, communication controllers, and analog interfaces. 16-bit microcontrollers occupy the middle ground between 8-bit entry-level MCUs and 32-bit ARM Cortex devices, delivering higher code density, native handling of larger data types, and richer peripherals while keeping cost and power modest. The M16C/Tiny series uses the R8C CISC core, which provides a compact 16-bit instruction set with high code density. Key features include 48 KB flash memory organized as 48K × 8, 4 KB RAM organized as 4K × 8, an internal oscillator, 55 programmable I/O pins, and an operating temperature range of -20 °C to +85 °C. The 64-LQFP (10 × 10 mm) package offers a compact footprint while providing ample I/O for embedded designs. The MCU supports low-power operation modes to extend battery life in portable systems. The M16C architecture uses a Harvard-style internal bus with separate instruction and data paths, which improves throughput versus single-bus designs at the same clock rate. The integrated flash memory supports in-circuit programming via a serial interface, simplifying firmware updates in production and in the field. Built-in safety features include a watchdog timer, voltage detection circuits, and clock monitors. Typical applications include automotive body electronics, HVAC control modules, white-goods motor control, sensor interface boards, and small consumer appliances. The wide 3 V to 5 V supply range also supports industrial 5 V backplane systems. The internal oscillator reduces BOM cost by removing external crystals in cost-sensitive designs. When designing with this MCU, ensure the firmware update procedure leaves the M16C/Tiny/28 vector table in a consistent state during flash writes. Decoupling capacitors must be placed close to all VCC/AVCC pins, and unused I/O pins should be configured as outputs with defined levels to minimize power consumption. Designers should verify the package's thermal performance when driving multiple high-current loads. This page consolidates verified distributor pricing, same-package alternatives, and practical design notes that go beyond the manufacturer datasheet summary, giving engineers a one-stop reference for selecting and sourcing the M30281F6HP#U9B.

Cotação Contato
M30624FGPFP - 16-Bit 24MHz 256KB MCU | Renesas | 100-QFP
M30624FGPFP

M30624FGPFP - 16-Bit 24MHz 256KB MCU | Renesas | 100-QFP

Renesas Electronics M30624FGPFP is a 16-bit CMOS microcontroller in the M16C/60 and M16C/62P families, operating at up to 24 MHz with 256 KB of flash memory in a 100-pin QFP package measuring 14 x 20 mm. It uses Renesas Technology's high-performance silicon-gate CMOS process and the M16C/60 Series CPU core. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, timers, serial interfaces, analog peripherals, and I/O into one package. The M16C/62P architecture combines a 16-bit instruction set with sophisticated, efficient instructions, supporting embedded control in industrial, consumer, communications, and appliance equipment. The verified distributor listing identifies the MCU as operating at 3/5 V. Key verified attributes include a 16-bit CPU, 24 MHz maximum operating frequency, 256 KB organized as 256K x 8 flash memory, and a 100-QFP package. A lead-free M30624FGPFP#U5C ordering variant is listed by Mouser. The exact RAM capacity, peripheral complement, timer channels, ADC characteristics, operating-temperature range, and I/O ratings were not supplied in the verified source data and require confirmation from the manufacturer datasheet. Technically, the part belongs to the M16C/60 family using the M16C/60 Series CPU core. Its 16-bit architecture is relevant to control loops and embedded workloads requiring more arithmetic capability than a basic 8-bit MCU. The 256 KB flash capacity provides substantially more on-chip program storage than many small 8-bit controllers. The 100-QFP format offers a high pin count, potentially supporting dedicated peripheral and general-purpose I/O, but exact signal assignment must be taken from the datasheet rather than inferred. Typical application categories include industrial controllers, factory equipment, motor and machine control, communications equipment, test and measurement instruments, and consumer appliances. These uses align with the MCU category and high-pin-count package, although the manufacturer datasheet should be checked for specific peripheral support before design selection. Design planning must account for the 3/5 V supply indication, programming requirements, oscillator and reset circuitry, decoupling, and all 100 physical pins. Firmware migration is especially important because Renesas directs new-system designs toward M3062LFGPFP rather than the older M30624FGPFP. Review current lifecycle status and obtain authoritative technical support before committing a new production design. This page consolidates verified distributor specifications, the manufacturer migration notice, and engineering-oriented replacement guidance. It separates confirmed values from missing data so engineers can make an informed sourcing decision without treating incomplete search snippets as full datasheet specifications.

Cotação Contato
M30624FGPFP#U3C - 16-Bit 24MHz 256KB Flash MCU 100-QFP | Renesas
M30624FGPFP#U3C

M30624FGPFP#U3C - 16-Bit 24MHz 256KB Flash MCU 100-QFP | Renesas

The Renesas Electronics M30624FGPFP#U3C is a 16-bit single-chip CMOS microcomputer from the M16C/60 platform, specifically the M16C/62P sub-family, packaged in a 100-pin QFP (14x20 mm). The device integrates an M16C/60 Series CPU core running at up to 24 MHz with 256 KB of on-chip FLASH program memory (256K x 8) and is specified for 3 V / 5 V dual-voltage operation across the industrial temperature range (-40 °C to +85 °C I-temp). What is a 16-bit microcontroller (MCU)? A microcontroller is a single integrated circuit that combines a CPU core, program memory (ROM/FLASH), working memory (RAM), and programmable peripherals on one die. The M16C/60 family belongs to the 16-bit CISC MCU category - sitting hierarchically between 8-bit legacy controllers (8051, PIC16) and modern 32-bit ARM Cortex-M cores - and is widely used in industrial, automotive body, and white-goods applications where deterministic interrupt response, low EMI, and code density matter more than raw MIPS. Key features of the M30624FGPFP include the high-performance M16C/60 series CPU core with a small, position-independent instruction set, 12 KB of RAM, multi-channel 10-bit A/D converter, multiple timers, UART/SIO/I2C interfaces, watchdog timer, and rich interrupt controller. The 'U3C' suffix indicates the Pb-free I-temp lead-free 100-QFP packaging variant. The 256 KB flash is field-programmable via standard serial programming and supports block-erase plus byte-write operations. The silicon gate CMOS process yields low power consumption, with multiple idle/sleep modes and a power-down halt state suitable for battery-aware designs. The M16C architecture is engineered for C code efficiency and fast context switches, supported by a uniform 16-bit register file and orthogonally addressed peripherals. Typical applications include industrial motor control, factory automation sensor nodes, HVAC control boards, automotive body ECUs (non-safety), consumer white goods, and general-purpose embedded control replacing 8-bit MCUs where more code space or analog integration is needed. It is often paired with external EEPROM for parameter storage and CAN/LIN transceivers for vehicle networking. When designing with this device, route the analog supply (AVCC) separately from the digital supply and decouple with 0.1 µF + 10 µF bulk capacitors near each supply pin. Use the on-chip debugger interface for development and ensure XIN/XOUT traces are short to avoid oscillator noise coupling. The 100-QFP package supports hand-soldering and rework, simplifying prototyping. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet - giving engineers a faster procurement and design-in path for the M16C/62P family.

Cotação Contato
M30624FGPFP#U5C - M16C/62P 16-bit MCU, 256KB Flash, 100-QFP | Renesas
M30624FGPFP#U5C

M30624FGPFP#U5C - M16C/62P 16-bit MCU, 256KB Flash, 100-QFP | Renesas

The Renesas Electronics M30624FGPFP#U5C is a single-chip 16-bit CMOS microcomputer from the M16C/60 Series M16C/62P Group, integrating 256 KB of flash memory and 24 MHz of CPU performance in a 100-pin QFP (14x20 mm) package. It combines the high-performance M16C/60 CPU core with the silicon-gate CMOS process, delivering 16-bit processing at low power consumption for embedded control applications. A microcontroller (MCU) is an integrated circuit that combines a CPU, memory (RAM/ROM/Flash), and programmable I/O peripherals on a single silicon die. The M16C family sits within the 16-bit microcontroller taxonomy, between 8-bit MCUs (e.g., 8051) and 32-bit ARM Cortex-M devices, offering a balance of code density, deterministic interrupt latency, and peripheral integration well suited to real-time control. The M16C/62P Group sits under the M16C/60 Series umbrella of Renesas's mid-range MCU portfolio. Key features include 256 KB of on-chip flash (256K x 8), 4 KB of on-chip RAM, a 24 MHz maximum CPU clock, a 10-bit A/D converter, a wide operating voltage range of 2.7V to 5.5V, and an operating temperature range of -20C to +85C. The 100-QFP package provides ample I/O for motor control, automotive body electronics, and industrial automation. Multiple timers, serial interfaces (UART, I2C, SPI), and interrupt controllers are integrated, eliminating the need for external peripherals. The M16C/60 CPU core uses a register-based architecture with 24-bit linear addressing, supporting high-level language efficiency and rich addressing modes. Built-in flash allows in-application reprogramming via serial or background programming modes, simplifying field firmware updates. The silicon-gate CMOS process yields low quiescent current and supports 3V and 5V system designs with a single part number. Typical applications include industrial motor control, HVAC control boards, automotive body ECUs, home appliance controllers (washing machines, microwave ovens), and metering/pump controllers. The wide 2.7V-5.5V supply range makes it suitable for both 3.3V and 5V logic designs. When designing with this MCU, ensure the 100-pin QFP footprint matches your PCB land pattern and provide adequate decoupling (100 nF + 10 uF) near each power pin. Use the on-chip debug/flash programming interface for production firmware loading rather than relying on external programmers. Note that Renesas recommends the newer M3062LFGPFP for new designs. This page consolidates distributor pricing, drop-in alternative analysis, and practical design notes beyond what the manufacturer datasheet alone provides.

Cotação Contato
M30626FHPFP - 16-Bit 24MHz M16C/62P MCU, 384KB Flash | Renesas
M30626FHPFP

M30626FHPFP - 16-Bit 24MHz M16C/62P MCU, 384KB Flash | Renesas

The Renesas M30626FHPFP is a 16-bit single-chip CMOS microcontroller from the M16C/62P family, built around the high-performance M16C/60 Series CPU core with 384KB of on-chip flash memory and 24MHz maximum operating frequency, housed in a 100-pin QFP (14x20 mm) package. It supports 5V operation with a wide 2.7V to 5.5V supply range, integrates 31KB of RAM, and provides rich on-chip peripherals including multi-channel 10-bit A/D converter, DMA controller, three UART/SIO channels, and timers. An M16C/62P microcontroller is a 16-bit CISC MCU from the M16C family of single-chip microcomputers, engineered using high-performance silicon-gate CMOS process technology. It sits within the broader taxonomy of microcontroller -> embedded processor -> semiconductor IC, and is designed for industrial-grade control applications requiring deterministic real-time response, low EMI, and a robust instruction set optimized for C compiler code density. Key differentiating features include 384KB flash program memory (384K x 8 organization), 31KB RAM, 87 I/O pins, four DMA channels, three serial I/O blocks, 8-bit and 16-bit timers, a 10-bit A/D converter with up to 26 input channels, and a watchdog timer. It supports both 3V and 5V operation (industrial temperature range -40C to +85C) and is Pb-free, RoHS-compliant. The device implements the M16C/60 CPU core with 16-bit fixed instruction width, register-based architecture with 32KB address space, and efficient C-language support. Its integrated peripherals include CRC calculation hardware, intelligent I/O ports capable of key input wake-up, and a power-saving mode with multiple clock gearing options. The architecture enables deterministic interrupt latency for real-time control. Typical applications include industrial automation controllers, motor control inverters, factory automation PLCs, building HVAC controls, security system panels, vending machine controllers, and white goods control boards. The wide operating voltage (2.7V-5.5V) and industrial temperature range (-40C to +85C) make it suited to harsh environments. Design consideration: when migrating from earlier M16C/62 to M16C/62P, verify the watchdog timer and A/D converter channel mapping. Place a 0.1uF decoupling capacitor adjacent to each VCC/AVCC pin pair and keep the analog reference traces short to minimize digital switching noise on ADC sampling accuracy. This page synthesizes distributor pricing from DigiKey/Mouser, drop-in alternatives in the same 100-QFP package, and practical design notes that complement the manufacturer datasheet with field-application guidance.

Cotação Contato
M30855FJGP#U3 - 16/32-Bit M32C/85 MCU, 512KB Flash, 144-LQFP | Renesas
M30855FJGP#U3

M30855FJGP#U3 - 16/32-Bit M32C/85 MCU, 512KB Flash, 144-LQFP | Renesas

The Renesas M30855FJGP#U3 is a 16/32-bit single-chip CMOS microcontroller from the M32C/80 series (M32C/85 group) operating at up to 32 MHz, integrating 512 KB of on-chip flash program memory and 24 KB of RAM in a 144-pin LFQFP (20x20 mm) package. The part is specified over an industrial temperature range of -40C to +85C and operates from a 3 V to 5.5 V supply, making it compatible with both 3.3 V and 5 V system designs. The M30855FJGP#U3 offers 121 general-purpose I/O pins, multiple on-chip peripherals including timers, serial interfaces (UART/SIO/I2C), an A/D converter, and DMA channels for high-throughput embedded control. A microcontroller (MCU) is a self-contained computing subsystem that integrates a CPU core, program and data memory, peripherals, and I/O on a single silicon die. Within the broader semiconductor taxonomy, MCUs belong to the integrated circuits family, specifically the microcontroller subcategory, and sit below microprocessors in complexity while providing complete embedded-control functionality. The M32C/80 platform is Renesas' legacy 16-bit CISC architecture with 32-bit internal registers, popular in industrial automation, automotive body controllers, and consumer appliances. Key features of the M30855FJGP#U3 include 512 KB flash program memory (512K x 8), 24 KB of RAM (24K x 8), a maximum operating frequency of 32 MHz, an internal oscillator, and 121 user I/O pins routed through the 144-LFQFP package. The wide 3 V to 5.5 V supply range simplifies integration into both legacy 5 V designs and modern 3.3 V subsystems without level shifters, while the industrial temperature grade enables deployment in factory, automotive cabin, and outdoor equipment. The M32C/85 core architecture uses a CISC instruction set optimized for compact code density, with hardware multipliers, multiple register banks, and a rich interrupt controller that supports real-time control loops. The integrated DMA reduces CPU load for high-speed peripheral transactions such as serial communication and A/D conversion. Typical applications for the M30855FJGP#U3 include industrial factory automation systems, automotive body electronics, consumer appliance control boards, and general-purpose 16-bit embedded platforms. Engineers select this part for designs that require a mature, well-supported Renesas M16C/M32C software ecosystem. When designing with the M30855FJGP#U3, ensure that the chosen emulator/debugger (such as the E8a or E10A-USB) matches the device group, and follow the M32C/85 hardware manual pin-function assignment tables to avoid peripheral conflicts on the 121 I/O pins. This page synthesizes verified distributor pricing, drop-in alternative MPNs from the Renesas M16C/M32C family, and practical design notes not consolidated on any single manufacturer page.

Cotação Contato
M68LC302CAF20VCT-FR - 20MHz M68000 MPU w/ CPM, 100-LQFP | NXP
M68LC302CAF20VCT-FR

M68LC302CAF20VCT-FR - 20MHz M68000 MPU w/ CPM, 100-LQFP | NXP

The NXP M68LC302CAF20VCT-FR is a 20 MHz integrated M68000 microprocessor that combines the MC68000 core with the Communications Processor Module (CPM), supplied in a 100-pin LQFP (14x14 mm) package. The low-cost LC variant omits the cryptographic coprocessor that distinguishes the MC68302, retaining the dual M-Bus/SCC serial channels, three parallel ports, and DMA channels that made the MC68302 family the canonical one-chip networking and communications processor of the early 1990s. The 20 MHz bus clock delivers approximately 2.7 MIPS sustained performance, suitable for embedded routers, X.25/PAD controllers, and industrial serial concentrators. A MPU (Microprocessor Unit) is the master execution engine of an embedded system; in this ColdFire M68000 family, it forms the heart of a printed-circuit assembly alongside external memory and peripherals. The M68LC302 sits at the top of a typical hierarchy: MPU -> microprocessor -> processor -> digital IC -> semiconductor. The integrated CPM (Communications Processor Module) is the architectural innovation of the 68302 line, offloading HDLC/SDLC framing, UART, transparent bisync, and DMA from the 68000 core, allowing the CPU to focus on protocol stack and management tasks. The 'C' suffix denotes the 5V core, the 'AF' indicates the LQFP package, '20' specifies 20 MHz operation, 'VC' marks plastic LQFP with operating temperature -40C to +85C, and 'T-FR' is the lead-free tray shipping option. Key features include 1.1K bytes of internal dual-port RAM for descriptor tables, three independent full-duplex serial channels (two SCC plus one SMC), seven DMA channels, a 16-bit parallel I/O port, and a 24-bit address bus supporting up to 16 MB of linear memory. The device operates from a single 5V supply and provides a 4-wire serial debug port for background-mode development. The 100-pin LQFP package provides 0.5 mm lead pitch, compatible with standard surface-mount assembly processes. Typical applications include ISDN terminal adapters, X.25 packet assemblers/disassemblers, low-end industrial routers, serial protocol converters, and legacy telecommunications backplanes. Production engineers commonly use the M68LC302 in maintenance-of-way equipment, RTUs, and SCADA serial front ends where the MC68302 software base is preserved but cryptographic hardware is not required. When designing with this device, engineers should note the 5V-only core supply, the lack of on-chip flash (external ROM/EPROM is required), and the importance of bus arbitration when interfacing to external DMA peripherals. Lead-free (T-FR) parts comply with current RoHS soldering profiles and should be used in new designs. The part is no longer recommended for new designs per NXP's product lifecycle page, so long-term availability planning is essential.

Cotação Contato
MAC7111MAG40 - 32-Bit ARM7 MCU 512KB Flash 144-LQFP | NXP
MAC7111MAG40

MAC7111MAG40 - 32-Bit ARM7 MCU 512KB Flash 144-LQFP | NXP

The NXP MAC7111MAG40 is a 32-bit ARM7TDMI-S Flash microcontroller developed for embedded automotive body and chassis applications, delivering 50 MHz CPU performance with 512KB on-chip Flash and 144-LQFP (20x20 mm) packaging. It integrates a 16-channel 10-bit ADC, CAN 2.0 interface, enhanced I/O capability with external bus, and AEC-Q100 automotive qualification. Background: A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash/ROM), data memory (RAM), and a rich peripheral set. The ARM7TDMI-S core is a 32-bit RISC architecture featuring the Thumb instruction set for improved code density, widely adopted in automotive and industrial embedded systems. Within the broader taxonomy, the MAC7111MAG40 belongs to the MCU -> microcontroller -> embedded processor -> semiconductor IC hierarchy, and to the Flash-based automotive MCU sub-family. Key features include 512KB program Flash, 32KB SRAM, 50 MHz core clock, 112 GPIO lines, 16-channel 10-bit ADC, two CAN 2.0A/B controllers, an external bus interface for memory expansion, and AEC-Q100 Grade 1 qualification supporting -40C to +125C operation. The MAC7111 family is pin-compatible with MAC7120/MAC7130/MAC7140 devices, allowing scalability between Flash sizes and peripheral mixes. Architecture depth: the MAC7111MAG40 uses the ARM7TDMI-S core with a 3-stage pipeline and Von Neumann bus. Its embedded Flash controller accelerates in-application programming, and the Enhanced Capture Timer (ECT) module supports up to 10 channels for precise PWM and pulse measurement. The device integrates a 16-channel 10-bit ADC with 7 us minimum conversion time. Typical applications include automotive body control modules (BCMs), instrument clusters, HVAC controllers, lighting modules, and CAN node ECUs. AEC-Q100 Grade 1 qualification makes it suitable for under-hood and chassis systems exposed to high thermal stress. Design consideration: when migrating from the MAC7110 to MAC7111 family, verify the external bus timing parameters against any SRAM or peripheral glue logic, and ensure that the 144-LQFP pad layout and pinout match the MAC71xx pin-compatible devices to enable drop-in scalability. This page consolidates distributor pricing, pin-compatible drop-in alternatives, and design notes that go beyond the manufacturer datasheet, supporting both new designs and lifecycle refresh decisions for long-life automotive programs.

Cotação Contato
MAC7111MPV40 - 32-Bit RISC MCU, 512KB Flash | Freescale
MAC7111MPV40

MAC7111MPV40 - 32-Bit RISC MCU, 512KB Flash | Freescale

Freescale Semiconductor MAC7111MPV40 is a 32-bit RISC microcontroller with 512 KB of flash memory in a 144-terminal automotive-temperature LFQFP package. The verified source data identifies it as an automotive-grade microcontroller with gull-wing terminals and a square package. Its position in the embedded hierarchy is microcontroller, embedded processor, RISC processor, and semiconductor. The MAC7111MPV40 combines embedded flash, external-bus-oriented connectivity, and analog-to-digital conversion capabilities in a single device. The source data specifically identifies a 16-channel ADC and an external bus, while detailed conversion resolution, bus timing, clock architecture, voltage limits, and peripheral list are not present in the supplied verified records. Those values remain marked as data needed rather than inferred. Its automotive temperature designation makes the device relevant to vehicle electronics requiring a substantial embedded-programming and peripheral footprint. The 144-terminal LFQFP provides many external connections compared with small general-purpose MCUs, but it also demands careful board layout and a larger land pattern than leadless packages. Designers should preserve the manufacturer reference-manual pin assignments when creating a new PCB. Typical application areas include automotive body and chassis control, sensor aggregation, actuator control, gateway modules, and embedded vehicle-network electronics. The external bus can connect the MCU to additional peripherals, while the 16-channel ADC supports analog sensor and vehicle-signal acquisition. Exact timing, electrical limits, and software-support details must be checked in the MAC7111 hardware documentation before release. For PCB design, use the manufacturer package drawing and pinout rather than distributor category summaries. Confirm all 144 terminal names, exposed-pad requirements, power rails, ground connections, oscillator circuits, and external-bus routing. Because verified lifecycle, supply, and price data are not supplied, procurement should use authorized-channel confirmation rather than assumptions. This page consolidates verified package, memory, interface, and marketplace-source information while clearly separating it from unavailable technical data. It also explains the sourcing and design limits engineers must resolve from the manufacturer hardware documentation.

Cotação Contato
MAC7111MPV50-FR 50MHz 512KB Flash ARM7 MCU | NXP
MAC7111MPV50-FR

MAC7111MPV50-FR 50MHz 512KB Flash ARM7 MCU | NXP

The NXP Semiconductors MAC7111MPV50-FR is a 32-bit single-core ARM7TDMI-S microcontroller operating at 50 MHz, with 512 KB of flash memory, in a 144-LQFP surface-mount package. The verified distributor listing identifies an automotive-grade gull-wing package with 144 terminals and a square 20 mm by 20 mm body. These core figures position the device for embedded control systems requiring deterministic processing, substantial on-board program storage, and a high pin count for external interfaces. A microcontroller is a semiconductor that integrates a processor core, nonvolatile program memory, data memory, peripheral controllers, and interface logic into one embedded-computing device. Within the hierarchy of semiconductor, integrated circuit, embedded processor, and microcontroller, the MAC7111MPV50-FR belongs to the ARM7TDMI-S product class. That processor organization is intended for embedded control rather than a desktop operating system, making the device relevant to automotive electronics, industrial controllers, communication equipment, and real-time control products. The verified product information establishes a 50 MHz operating frequency, 512 KB flash, 32-bit single-core processing, and 144-LQFP packaging. One search result also characterizes the part as automotive-grade, while the family hardware document contains electrical specifications, pin assignments, and package diagrams. Flash capacity provides room for embedded code and constants, but the supplied excerpts do not expose RAM size, peripheral inventory, memory-map details, or electrical limits; those values must be verified in the full manufacturer hardware document before schematic or firmware work. Engineers should treat the 144-pin LQFP as a substantial mixed-signal and digital controller package. The 20 mm by 20 mm footprint requires adequate routing area, exposed escape access, and careful assembly planning. Its gull-wing leads are more visually inspectable than fine-pitch BGA interconnects, but they still require controlled fanout, solder mask definition, and thermal verification. The family document's pin assignments should govern connector, ground, supply, clock, and peripheral routing. Typical engineering uses include automotive body and communication modules, industrial automation equipment, networked embedded controllers, and compact real-time systems. Suitability depends on validating the exact peripheral set, memory resources, electrical characteristics, temperature range, and software constraints. No assumption should be made merely because another 50 MHz controller has a similar headline specification; software architecture and peripheral compatibility are as important as clock speed. A legacy or unavailable MCU replacement must be treated as a risk-management decision. Confirm package dimensions, pin assignments, power behavior, peripheral multiplexing, clock topology, memory, and software binary compatibility before substituting. This page combines verified distributor identification, package data, sourcing information, and explicit uncertainty markers rather than inferring unsupported specifications. The practical information gain here is the separation of verified facts from missing engineering data: the 50 MHz ARM7TDMI-S core, 512 KB flash, and 144-LQFP footprint are usable selection facts, while unspecified RAM, pins, electrical limits, and lifecycle status remain explicit validation items.

Cotação Contato
MAC7111VPV50 - 32-Bit 50MHz ARM7 MCU | NXP
MAC7111VPV50

MAC7111VPV50 - 32-Bit 50MHz ARM7 MCU | NXP

The NXP Semiconductors MAC7111VPV50 is a 32-bit ARM7 microcontroller operating at 50 MHz, with 512 KB of flash memory and a 144-LQFP (20x20 mm) package. According to the verified distributor listings, its supply voltage range is 2.35 V to 5.5 V, and it provides a 10-bit ADC feature identified in the retrieved component data. The device is positioned for industrial embedded-control designs requiring substantial embedded flash and a high pin count. An MCU is an integrated circuit that combines a processor core, nonvolatile program memory, data memory, peripherals, and interface logic on one semiconductor device. The MAC7111VPV50 belongs to the ARM7-based embedded-controller hierarchy: MCU, embedded processor, microcontroller, and semiconductor. This integration allows a controller board to execute firmware and supervise external sensors, actuators, communications, and power functions without requiring separate memory and processor packages. Verified headline features include ARM7 architecture, 32-bit processing, a 50 MHz clock, 512 KB organized as 512K x 8 flash, 144 terminals, a gull-wing terminal form, an industrial temperature grade, and an LFQFP package. The high pin count can support systems requiring numerous I/O resources, while 512 KB of flash provides room for embedded firmware. The exact RAM, core peripherals, ADC resolution beyond the listed 10-bit indication, and individual I/O functions are not supplied in the verified data. The MAC7111VPV50 is identified as an industrial-grade microcontroller rather than a power semiconductor. Accordingly, no safe operating area is applicable. Its design use should be based on the manufacturer family hardware specifications and board-support requirements. Before schematic release, engineers must verify the complete pin assignment, alternate-function multiplexing, recommended external components, clock configuration, programming method, and operating limits from the official family document. Potential uses include industrial automation controllers, IoT equipment, embedded motor-control supervisory logic, metering systems, and low-power board designs. The 50 MHz ARM7 core and 512 KB flash make the device relevant where deterministic embedded software and a moderate code footprint are needed. Its 144-LQFP package is larger than modern leadless MCU packages but exposes many terminals and can simplify access to communications, general-purpose I/O, and control functions when exact pin verification is completed. When designing around this MCU, preserve the package footprint, pin numbering, exposed programming signals, power rails, decoupling requirements, and clock network exactly as defined by the family documentation. Because no verified drop-in alternatives were returned, engineers should not substitute an MPN based only on processor speed or memory size. Firmware, timing, peripheral mapping, voltage levels, and package-level compatibility must all be revalidated before any replacement is approved. This product page consolidates the verified distributor specifications, sourcing links, package identity, application context, and design limitations for MAC7111VPV50. It adds engineering-oriented selection guidance while explicitly separating known values from data that still requires confirmation from the manufacturer family hardware specifications.

Cotação Contato
MAC7112MAG40 - 40MHz 32-Bit Automotive MCU | NXP
MAC7112MAG40

MAC7112MAG40 - 40MHz 32-Bit Automotive MCU | NXP

The NXP MAC7112MAG40 is a 32-bit ARM7TDMI-S microcontroller operating at 40 MHz, with 256 KB of Flash program memory, 16 KB of RAM, and 32K x 8 EEPROM in a 144-pin LQFP package measuring 20 x 20 mm. Designed for embedded automotive applications, the device combines a single-core processor, external-bus capability, and 16-channel A/D conversion in one integrated MCU. Its stated 2.5 V / 5 V operating-voltage support and -40°C to +125°C temperature range make it relevant to demanding automotive control and monitoring systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into one device. In the hierarchy, the MAC7112MAG40 is an MCU, embedded processor, and semiconductor, with the ARM7TDMI-S core providing 32-bit RISC execution. Its Flash memory supports firmware storage, while RAM provides working memory for real-time control tasks. The 32K x 8 EEPROM adds nonvolatile data storage for calibration values, configuration data, and diagnostic records. The verified feature set includes a 40 MHz operating frequency, 256 KB Flash, 16 KB RAM, 32K x 8 EEPROM, 144-LQFP packaging, external-bus support, and 16-channel A/D conversion. The package is a tray-packaged automotive MCU according to the supplied distributor information. Partstack data identifies CMOS technology, a 260°C peak reflow temperature, an e3 JESD-609 code, tin terminal finish, and a 40-second maximum dwell at peak reflow temperature. The MAC7112MAG40 fits applications such as body and chassis electronics, powertrain supervisory controls, vehicle communication gateways, sensor aggregation, actuator controllers, and diagnostic systems. Its 16-channel ADC supports analog sensor acquisition, while its external bus can connect the MCU to additional controllers, memory, or communication devices. The -40°C to +125°C range is especially important for automotive environments, although the exact operating region for every internal peripheral should be confirmed in the manufacturer datasheet. Designers should verify power sequencing, clocking, reset behavior, ADC reference, external-bus timing, and unused-pin handling against the manufacturer documentation before layout release. The 144-pin LQFP package requires careful escape routing and thermal review. Automotive production also requires supplier traceability, programming, test, and change-control procedures beyond basic electrical compatibility. This page consolidates verified distributor snippets, the supplied cross-reference results, and engineering guidance without treating unverified alternatives as drop-in parts. Because the retrieved data does not establish five pin-compatible replacements, no unsupported substitute list is presented.

Cotação Contato
MAC7112MPV40 - 40MHz ARM7 MCU, 256KB Flash | NXP
MAC7112MPV40

MAC7112MPV40 - 40MHz ARM7 MCU, 256KB Flash | NXP

The NXP Semiconductors MAC7112MPV40 is a 32-bit ARM7TDMI-S microcontroller operating at 40 MHz, with 256 KB of flash memory and a 112-LQFP package measuring 20 mm by 20 mm. The verified distributor data also identifies an external bus, a 16-channel 10-bit A/D converter, and a 2.35 V to 2.75 V operating-supply range. These characteristics place it in the embedded microcontroller category, where a processor core, memory, analog conversion, and communications peripherals are integrated into one device. A microcontroller is a compact computer intended for embedded control. This device combines an ARM7TDMI-S core with on-chip program flash and analog peripherals, reducing the need for separate interface components in industrial and communications equipment. Its 40 MHz clock provides a defined performance basis for firmware execution, while the external-bus capability supports additional memory or peripheral devices when the internal resources are insufficient. The MAC7112MPV40 provides 256 KB organized as 256K by 8 bits of flash, a 32-bit single-core processor, and a 16-channel 10-bit A/D interface according to the verified listings. Its 2.35 V to 2.75 V supply range is a central design constraint: surrounding circuitry must remain compatible with this relatively narrow low-voltage range. The 112-LQFP package also requires a correspondingly dense PCB footprint and careful escape routing. Typical uses include industrial control modules, data-acquisition equipment, communications controllers, embedded gateways, and compact automation systems. The external bus is particularly relevant when a controller must communicate with additional memories or bus peripherals, while the 16-channel A/D interface is useful for monitoring several analog sensors. Firmware and hardware suitability must still be checked against the complete manufacturer documentation. A critical design consideration is footprint continuity. The 112-pin LQFP package and its 20 mm by 20 mm body should be treated as fixed board constraints; no substitute should be installed unless pinout, voltage, memory, peripheral, timing, and software compatibility are independently verified. Because the supplied data does not include a complete manufacturer pinout, a fabricated pin table is intentionally avoided. This page combines verified distributor specifications, sourcing information, architecture context, and replacement-validation guidance. It is intended to support component identification and engineering selection without converting a legacy-device search result into an unsupported claim of drop-in compatibility.

Cotação Contato
MAC7121MPV50 - 32-Bit 50MHz 512KB Flash MCU | NXP
MAC7121MPV50

MAC7121MPV50 - 32-Bit 50MHz 512KB Flash MCU | NXP

The NXP Semiconductors MAC7121MPV50 is a 32-bit ARM7TDMI-S microcontroller with a 50 MHz operating frequency, 512 KB of flash memory, and a 112-LQFP 20 mm x 20 mm package. It is identified by distributor data as a high-performance embedded controller in the MAC71 series, with automotive temperature-grade sourcing information also present in the verified results. An MCU is an integrated circuit that combines a processor core, program memory, data memory, peripherals, and interrupt control on one semiconductor device. The MAC7121MPV50 sits in the hierarchy embedded controller -> microcontroller -> integrated circuit -> semiconductor. Its flash-backed program memory supports standalone firmware storage, while the ARM7TDMI-S core provides the execution engine for real-time embedded control. The verified listing identifies the MAC7121MPV50 as a single-core, 32-bit device operating at 50 MHz with 512 KB, or 512K x 8, of flash. Its 112-lead LQFP package uses a square 20 mm x 20 mm gull-wing format. The available evidence also identifies CANbus, I2C, SCI, and SPI connectivity in a comparison listing, although complete peripheral, voltage, timing, and electrical limits require confirmation from the original manufacturer documentation. Typical embedded uses include industrial control, automotive electronics, communications gateways, motor and actuator control, sensor acquisition, and networked embedded equipment. The 50 MHz ARM7TDMI-S core is appropriate for deterministic control loops and protocol handling when the design stays within the device's verified electrical and peripheral limits. The 512 KB flash capacity provides room for application firmware, boot code, diagnostics, and configuration data. A key design consideration is that package compatibility alone does not establish a safe replacement. Before substitution, verify the exact pin assignments, supply voltage, clock configuration, memory map, peripheral set, electrical ratings, temperature grade, and software support. For automotive or safety-related use, also confirm qualification, errata, production status, and manufacturer change notifications. This product page consolidates the verified distributor identity, package and memory data, sourcing links, and engineering cautions into one reference. It distinguishes verified facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate MAC7121MPV50 without relying on unverified generic MCU assumptions.

Cotação Contato
MAC7131MVF40 - 32-bit ARM7 MCU, 512KB Flash, 40MHz | NXP
MAC7131MVF40

MAC7131MVF40 - 32-bit ARM7 MCU, 512KB Flash, 40MHz | NXP

The NXP MAC7131MVF40 is a 32-bit ARM7TDMI-S microcontroller (MCU) with 512KB of embedded Flash memory, 40MHz CPU clock, and 128 I/O ports, housed in a 208-ball MAPBGA (17x17 mm, 1mm pitch) package. It is AEC-Q100 qualified for automotive body, chassis, and safety applications, and supports an operating temperature range of -40C to +125C with a 2.35V to 2.75V core supply and a 5V tolerant I/O domain. An ARM7TDMI-S microcontroller is a 32-bit RISC processor core based on the ARM7 family architecture, designed for embedded systems where deterministic real-time response, low power consumption, and a rich peripheral set are required. Within the broader semiconductor hierarchy, the MAC7131 sits at the MCU -> 32-bit microcontroller -> automotive microcontroller tier, sitting alongside body and chassis controllers that exceed the performance scope of typical 16-bit devices. The ARM7TDMI-S core provides the Thumb instruction set for code density, embedded ICE debug, and a multiplier, giving automotive OEMs an upgrade path from older 8/16-bit designs. Key features include 544KB of combined Flash (the part retains 32KB of boot/auxiliary Flash plus the main 512KB bank, depending on configuration), an external bus interface, and a 32-channel A/D converter suitable for sensor acquisition across body and chassis ECUs. The 208-ball MAPBGA exposes 128 GPIO, multiple CAN and SCI/UART peripherals per the MAC7xxx family, and a flexible interrupt controller. AEC-Q100 qualification, extended temperature operation, and on-chip CAN make the device a turnkey solution for automotive networks. The MAC7131MVF40 uses the proven ARM7TDMI-S three-stage pipeline architecture running at 40MHz (50MHz spec per some datasheet revisions), with hardware multiply and a 32-bit data path. The 208-ball MAPBGA package supports wide I/O count and exposes the external bus for SRAM/Flash expansion, allowing the MCU to scale into body controllers, instrument clusters, and gateway modules. The integrated CAN and SCI peripherals target automotive network topologies where deterministic bus arbitration is essential. Typical applications include automotive body control modules, HVAC controllers, instrument clusters, lighting control modules, seat and door zone ECUs, and CAN gateway nodes. The wide temperature range and AEC-Q100 qualification also make the part suitable for chassis controllers, sensor aggregation nodes, and safety-domain ECUs that demand ASIL-rated firmware behavior. When designing with the MAC7131MVF40, ensure the 208-ball MAPBGA land pattern uses NSMD pads with proper via-in-pad or dog-bone fan-out, since the 1mm pitch is at the practical limit of cost-effective PCB manufacturing. Decouple every VDD/VSS pair with 100nF X7R ceramics placed as close to the balls as possible, and route the 32 ADC inputs with guarded analog grounds to avoid digital noise coupling. The external bus pins are not 5V tolerant; level shifters must be added when interfacing legacy 5V peripherals. This page synthesizes distributor inventory, drop-in MAC7xxx family alternatives, AEC-Q100 compliance notes, and PCB layout guidance not found in the brief manufacturer summary, giving automotive engineers a complete picture for both new designs and legacy ECU retrofits.

Cotação Contato
MAC7131VVF50R2 - 32-Bit ARM7 MCU, 512KB Flash, 144-MBGA | NXP
MAC7131VVF50R2

MAC7131VVF50R2 - 32-Bit ARM7 MCU, 512KB Flash, 144-MBGA | NXP

The NXP Semiconductors MAC7131VVF50R2 is a 32-bit ARM7TDMI-S based microcontroller integrated circuit delivering 50 MHz CPU clock speed with 512 KB of embedded Flash memory, packaged in a 144-ball MAP-BGA (7x7 mm) format. It operates from a 2.35 V to 2.75 V supply and is targeted at automotive body and chassis applications requiring deterministic real-time response. The MAC7100 family is a series of ARM7TDMI-S based microcontrollers (MCUs) designed by Freescale (now NXP) for automotive body electronics. As an automotive microcontroller, it sits within the broader hierarchy of embedded processors > microcontroller units (MCUs) > 32-bit MCUs > ARM Cortex/ARM7 family. The part integrates Flash, SRAM, multiple timer modules, CAN and SPI peripherals, and an A/D converter on a single die, reducing system BOM and PCB complexity. Key features include 512 KB of on-chip program Flash (organized as 512K x 8), a 32-bit ARM7TDMI-S RISC core with Thumb instruction support, automotive-grade temperature operation, and an integrated enhanced CAN (FlexCAN) interface. The MAC7100 series was designed for ISO 9141 and SAE J1850 body-comms protocols and is widely used in BCM (body control module) designs. Typical applications include automotive body control modules, instrument cluster controllers, HVAC panels, door module controllers, and powertrain peripheral ECUs. The part meets AEC-Q100 stress-test requirements as qualified by Freescale (now NXP) for under-the-hood and body-comfort zones. Designers should note that the part is mature and in some variants rated Last Time Buy by NXP; verify lifecycle status with the distributor before committing to new designs. The 144-MBGA package requires 4-layer PCB stack-up with controlled-impedance routing for the external memory bus to meet timing closure.

Cotação Contato
MAX32550-LCS+T - Secure Cortex-M3 MCU 1MB Flash 121-CTBGA | ADI
MAX32550-LCS+T

MAX32550-LCS+T - Secure Cortex-M3 MCU 1MB Flash 121-CTBGA | ADI

The Analog Devices (formerly Maxim Integrated) MAX32550-LCS+T is an ARM Cortex-M3 based DeepCover secure microcontroller running at 108 MHz, integrating 1 MB of embedded Flash, 256 KB of system RAM, and 8 KB of battery-backed AES self-encrypted NVSRAM, packaged in a 121-ball CTBGA (8x8 mm). The DeepCover security subsystem is purpose-built for trusted devices such as mobile chip-and-PIN payment terminals and PIN pads. A secure microcontroller is an MCU that combines a standard processor core (here, ARM Cortex-M3) with integrated hardware cryptographic engines, secure boot ROM, tamper detection, and physically separate key storage. The MAX32550 belongs to the broader hierarchy: secure MCU -> microcontroller -> embedded processor -> integrated circuit. This device targets financial-terminal OEMs who need both application-class processing power and FIPS-grade security in a single chip. Key features include a 32-bit ARM Cortex-M3 core with 108 MHz maximum clock, 1 MB embedded Flash (1M x 8), 256 KB SRAM, 8 KB AES self-encrypted NVSRAM with battery backup, integrated cryptographic accelerators (AES, DES, SHA, RSA, ECC), hardware True Random Number Generator, secure boot ROM, physical tamper detection pins, an integrated smart-card interface (ISO 7816), magnetic-stripe reader interface, and USB 2.0 Full-Speed with on-chip PHY. The MAX32550 integrates a BGA package with 121 balls on an 8x8 mm body, allowing a compact PCB solution that includes the secure element, application MCU, and physical-tamper mesh interfaces in a single device. The NVSRAM is automatically encrypted with AES-256 keys generated and stored in a dedicated hardware block, removing software-side key management for tamper-sensitive state. The chip targets POS terminal OEMs seeking PCI PTS 4.x/5.x and EMVCo certification. Typical applications include mobile chip-and-PIN payment terminals, PIN pads, POS terminals, secure authentication tokens, EMV smart-card readers, and other financial-grade trusted devices. Industrial secure-control applications such as access-control and hardware security modules also benefit from the integrated tamper mesh. Design consideration: route the battery-backup NVSRAM domain with a separate power rail and a battery cell or super-cap; the cryptographic NVSRAM state is preserved while the rest of the chip powers down. Provide adequate ground-return vias under the CTBGA to meet EMI/magnetic-stripe-decoder noise immunity requirements. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MAX32666GXMBT+ - Dual-Core Cortex-M4/M4F BLE 5 MCU | ADI
MAX32666GXMBT+

MAX32666GXMBT+ - Dual-Core Cortex-M4/M4F BLE 5 MCU | ADI

The Analog Devices / Maxim Integrated MAX32666GXMBT+ is a 32-bit dual-core ARM Cortex-M4/M4F microcontroller with FPU, integrated Bluetooth 5 LE radio, hardware security suite, and 1MB Flash, housed in a 121-ball CTBGA (8x8 mm) package. The part operates from 1.71V to 3.6V supply at up to 96MHz core clock and includes 192KB SRAM plus 1MB on-chip Flash. Its dual-core architecture pairs an applications processor with an always-on network co-processor, enabling low-power wearable and IoT designs without sacrificing radio throughput. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one silicon die. The Cortex-M4 family adds a single-precision hardware floating-point unit (FPU) for DSP-class math, and a dual-core MCU further partitions responsibilities - one core runs application logic while the other offloads wireless stack, sensor fusion, or security tasks - reducing wake events and total system energy per task. Key features of the MAX32666GXMBT+ include Bluetooth 5 LE with 2 Mbps high-throughput and 4x long-range PHY modes, ADI TrustZone-style hardware secure element (TRUST), secure boot, true random number generator, AES-256, and SHA-256 accelerators. The integrated DC-DC converter and multiple low-power modes (Active, Sleep, Deep Sleep, Backup, Standby) yield system-level current as low as a few microamps in deep-sleep retention, critical for coin-cell and rechargeable wearables. Architecturally, the part is fabricated in a low-leakage CMOS process and uses ADI's ultra-low-power design IP. The radio block shares the same die as the application cores, eliminating external balun-matching complexity when paired with the recommended chip antenna. Hardware crypto accelerators offload TLS / DTLS handshake workloads so the M4F core can remain idle, further improving energy per transaction. Typical applications include fitness bands and smartwatches, medical wearable patches (continuous glucose monitor, SpO2), secure IoT endpoints (BLE sensor nodes), industrial asset trackers, and hearables / wireless earbuds. The wide 1.71-3.6V supply range supports direct Li-ion battery connection with internal regulation, simplifying the power tree. When designing with this part, allocate the secondary core exclusively to the BLE stack and security; do not share it with general application code. Validate PCB stack-up against the CTBGA escape pattern in the package diagram, and place the DC-DC inductor within 2mm of the LX pin to keep ripple below the AES engine's noise floor.

Cotação Contato
MB90F543GPF-GE - 16-Bit 16MHz 128KB Flash CAN MCU | Fujitsu
MB90F543GPF-GE

MB90F543GPF-GE - 16-Bit 16MHz 128KB Flash CAN MCU | Fujitsu

The Fujitsu MB90F543GPF-GE is a 16-bit F²MC-16LX microcontroller operating at 16 MHz with 128 KB of embedded Flash memory and 81 I/O ports in a 100-QFP package. Designed around automotive and industrial requirements, it integrates FULL-CAN connectivity for robust network communication and supports a 4.5 V to 5.5 V supply range. A microcontroller is a programmable integrated circuit containing a processor core, nonvolatile memory, I/O ports, timers, and communication peripherals. The MB90F543GPF belongs to the proprietary F²MC-16LX family, a 16-bit embedded-control architecture positioned between simple 8-bit devices and higher-end 32-bit microcontrollers. Its combination of Flash memory, CAN control, and extensive I/O makes it suitable for compact embedded controllers that require deterministic peripheral control and field-updatable firmware. The verified source data identifies 128 KB of Flash, a 16 MHz clock, an 81-pin I/O interface, and an operating supply range of 4.5 V to 5.5 V. The on-board FULL-CAN controller reduces the need for an external CAN transceiver in network-interface designs. Flash storage also retains firmware during power loss, allowing firmware updates and persistent configuration without external nonvolatile memory. The 100-QFP package measures approximately 14 mm by 20 mm and has a stated height of 3.35 mm. Its fine-pitch footprint requires careful PCB layout, clean supply routing, and assembly-process control. Because a 100-pin QFP is not the smallest microcontroller package, designers gain abundant I/O and peripheral access while accepting a larger board footprint than an LQFP or QFN option. Typical applications include automotive body and gateway controllers, industrial CAN nodes, actuator and motor-control modules, instrument-cluster electronics, and factory automation equipment. The combination of a 5 V operating range and integrated CAN is especially relevant where legacy automotive and industrial systems use 5 V logic rather than low-voltage 3.3 V rails. Designers should preserve the specified 4.5 V to 5.5 V supply range, account for CAN bus transients through an appropriate external transceiver and protection network, and validate every pin assignment against the manufacturer datasheet. Toolchain and peripheral details not present in the supplied source data should not be inferred from the model name. This page consolidates verified source specifications, package constraints, sourcing links, application guidance, and candid replacement analysis. Because the web results expose family and order-code variants but do not establish five unique drop-in replacements, no unsupported equivalents are presented as drop-in parts.

Cotação Contato
MB90F543GPF-GE1 - 16-bit F²MC-16LX MCU, 128KB Flash | Infineon
MB90F543GPF-GE1

MB90F543GPF-GE1 - 16-bit F²MC-16LX MCU, 128KB Flash | Infineon

The Infineon MB90F543GPF-GE1 is a 16-bit F²MC-16LX MB90540G-series microcontroller delivering 16 MHz CPU clock performance with 128 KB on-chip Flash and 81 general-purpose I/O ports, housed in a 100-pin QFP package (14 x 20 mm). It integrates a full-CAN 2.0B controller, multiple serial interfaces, and 4.5 V to 5.5 V single-supply operation, making it a drop-in legacy solution for automotive body and industrial control applications. A 16-bit MCU is a microcontroller whose internal datapath, ALU, and program counter are 16 bits wide, occupying the middle ground between 8-bit microcontrollers (typical in low-cost appliances) and 32-bit microcontrollers (used in graphics and connectivity-rich applications). Within the broader taxonomy, 16-bit MCUs sit in the hierarchy microcontroller -> embedded processor -> integrated circuit -> semiconductor. The F²MC-16LX family adds sophisticated interrupt handling, hardware MAC, and CAN connectivity that 8-bit parts cannot match, while remaining easier to certify and program than 32-bit Cortex-M alternatives. Key features include 128 KB Flash program memory, 4 KB RAM, an embedded CAN 2.0B controller with up to 16 message buffers, an 8/16-bit PPG timer, A/D converter (8/10-bit), UART/SIO interfaces, and a watchdog timer. Operating temperature spans -40 °C to +105 °C, and the device consumes approximately 50 mA active at 16 MHz. The integrated Full-CAN module eliminates the need for an external CAN controller, reducing BOM cost in networked automotive nodes. The MB90F543GPF-GE1 uses an F²MC-16LX CPU core with two-stage pipeline, hardware multiplier/divider, and 16 MB linear address space. Built on a 0.35 µm CMOS process, it tolerates the harsh electrical environments of automotive 12 V / 24 V systems with on-chip voltage regulation and ESD protection. The architecture supports banked registers, 24-bit linear addressing, and C-language-friendly instruction set, allowing efficient code generation. Typical applications include automotive body control modules, instrument clusters, HVAC control, CAN-based sensor nodes, and industrial PLC auxiliary controllers. Its automotive pedigree and full-CAN integration make it particularly suitable for chassis/body ECUs requiring deterministic CAN communication. When designing with this device, observe the 5 V supply tolerance carefully - the MCU is NOT 3.3 V tolerant on all pins. Use external level shifters for any 3.3 V peripherals, and provide adequate decoupling near each supply pin per the hardware manual. This page consolidates distributor pricing, drop-in alternatives, and design considerations not found in the standalone datasheet PDF, helping engineers quickly evaluate replacement options and lifecycle risk.

Cotação Contato