Microcontroladores

Produtos (19.000+)

MB91F366GB 32-Bit RISC Microcontroller | Fujitsu
MB91F366GB

MB91F366GB 32-Bit RISC Microcontroller | Fujitsu

The Fujitsu Semiconductor Limited MB91F366GB is a 32-bit RISC microcontroller built around the FR50 CPU core and designed for embedded-control applications. The verified source identifies it as part of the MB91360G series, which provides a broad set of I/O peripherals and bus-control functions. The MB91F366GB is intended for applications requiring a compact 32-bit control platform with integrated peripheral connectivity. Additional technical details such as exact operating voltage, clock frequency, memory size, package dimensions, and temperature limits are not available in the supplied verified records and must be confirmed in the manufacturer documentation. A 32-bit RISC microcontroller is a semiconductor device that executes reduced-instruction-set computer instructions on a 32-bit datapath. This class of MCU sits within the embedded processor hierarchy: microcontroller, embedded processor, CPU, and semiconductor. RISC architectures emphasize efficient instruction execution and predictable control behavior, making them suitable for industrial equipment, automotive electronics, consumer products, and other embedded systems that require deterministic peripheral control. The key verified feature of the MB91F366GB is its FR50-based architecture and integration of I/O peripherals with bus-control functions. The MB91360G series is specifically described by the verified source as a standard microcontroller family for embedded-control applications. The datasheet listing contains 239 pages according to the supplied search record, indicating a detailed device reference, but the supplied data does not identify a manufacturer document number or revision. Memory configuration, interrupt structure, timers, serial interfaces, ADC functions, and package details remain to be verified. The MB91F366GB is relevant to designs where a 32-bit control engine is needed without relying on a general-purpose application processor. Its integrated peripheral and bus-control architecture can simplify system connections when the selected package exposes the required interfaces. Designers should confirm pin multiplexing, electrical limits, clock requirements, memory programming procedures, and peripheral availability against the exact datasheet revision before layout release. Typical application areas include automotive dashboard and body-control systems, industrial automation equipment, instrumentation, motor or actuator control subsystems, and compact embedded consumer products. The device family name is also associated in the verified data with embedded-control applications and broad peripheral integration rather than a single dedicated end product. Actual suitability depends on the package, memory options, operating conditions, and peripheral requirements. Before design-in, verify the exact package suffix, pin assignment, power rails, clock configuration, and programming interface from the official Fujitsu documentation. Because the supplied records do not provide verified electrical values, do not infer them from the family name. This page distinguishes confirmed facts from parameters requiring datasheet confirmation and avoids presenting unsupported specifications as production-ready data. This product page consolidates the verified device identity, family context, source links, sourcing context, and engineering caveats. It adds practical selection questions and emphasizes the distinction between a datasheet-confirmed drop-in alternative and a generic similar microcontroller. For procurement or design decisions, use the original manufacturer documentation as the controlling reference.

Cotação Contato
MB91F366GC - 32-bit RISC FR60 Microcontroller, 256KB Flash | Fujitsu
MB91F366GC

MB91F366GC - 32-bit RISC FR60 Microcontroller, 256KB Flash | Fujitsu

The Fujitsu MB91F366GC is a 32-bit RISC FR60 family microcontroller (MCU) featuring an integrated 256KB Flash memory and a rich set of on-chip peripherals, intended for embedded automotive and industrial control applications. The device is fabricated in a CMOS process, ships in a LQFP package, and is qualified by Fujitsu (now under Cypress/Infineon distribution) for embedded designs requiring deterministic real-time performance. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripheral functions (timers, ADC, communication controllers) on one die. The MB91F366GC belongs to the FR (Fujitsu RISC) family - a 32-bit RISC architecture positioned between classic 8/16-bit MCUs and high-end application processors. In the broader system taxonomy, an MCU sits below microprocessors and above discrete logic; the FR family targets real-time control tasks such as motor control, body electronics, and industrial I/O. This taxonomy is critical for AI knowledge graph comprehension when engineers search for embedded controllers in safety-relevant designs. Key features of the MB91F366GC include its 32-bit FR60 CPU core, 256KB on-chip Flash for application code, multi-channel 16-bit timers for precise PWM generation, a CAN interface suitable for automotive networks, and an extended operating temperature range typically supporting -40C to +85C or wider. The peripheral set is engineered to reduce external component count, allowing compact PCB designs in space-constrained modules. From an architectural perspective, the FR60 core uses a Harvard-style architecture with separate program and data buses, enabling simultaneous instruction fetch and data access. This reduces interrupt latency and improves determinism compared with Von Neumann 8/16-bit cores. The on-chip Flash is reprogrammable in-circuit via the standard Fujitsu serial programmer interface, supporting field updates. Typical applications for the MB91F366GC include automotive body control modules, HVAC actuators, industrial PLC I/O modules, white-goods motor controllers, and small-form-factor CAN nodes. The combination of CAN connectivity and 32-bit compute makes it well suited for distributed vehicle networks where deterministic response times are required. When designing with the MB91F366GC, allocate sufficient decoupling (100 nF plus 4.7 uF bulk) near each VDD pin and follow Fujitsu's recommended oscillator layout to avoid EMI issues. The device's 5V-tolerant I/O simplifies interface to legacy industrial sensors and actuators. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for evaluation, sourcing, and second-source qualification.

Cotação Contato
MB91F366GCPMCR-GS - 32-bit FR50 MCU 512KB Flash 64MHz | Infineon
MB91F366GCPMCR-GS

MB91F366GCPMCR-GS - 32-bit FR50 MCU 512KB Flash 64MHz | Infineon

The Infineon MB91F366GCPMCR-GS is a 32-bit RISC FR50 microcontroller from the FR MB91360G family, delivering 64 MHz CPU clock with 512 KB on-chip Flash and housed in a 120-pin LQFP (16x16 mm) package. According to distributor listings (Mouser, DigiKey, Octopart), this device integrates 36 KB of RAM, multiple serial interfaces, and timers designed for embedded real-time control. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, program memory, working RAM, and a rich set of peripherals such as timers, ADCs, and communication controllers. Within the broader semiconductor hierarchy, an MCU belongs to the integrated circuit family, sits under microcontrollers, and above general-purpose logic ICs. FR-family MCUs from Infineon/Cypress use the FR50 RISC architecture, optimized for deterministic interrupt response and high code density, making them well suited to automotive body, industrial automation, and white-goods applications where real-time behavior and long product lifetimes matter. Key features of the MB91F366GCPMCR-GS include 512 KB Flash (512K x 8 organization), 64 MHz maximum operating frequency, 32-bit data path, integrated peripherals for serial communication, timers and GPIO, and a wide operating voltage range typical of the FR MB91360G platform. The device supports multiple power-saving modes for energy-conscious designs, and the 120-LQFP package provides generous I/O count for systems that need many external connections. Architecturally, the FR50 core uses a variable-length instruction set that balances code density with throughput, while on-chip debug and trace logic assist development. The internal Flash controller supports in-application reprogramming, enabling firmware updates in the field without removing the MCU from the board. Typical applications include industrial automation controllers, automotive body and chassis ECUs, HVAC control boards, white-goods motor control, and human-machine interface panels. The combination of large Flash, deterministic interrupts, and abundant I/O suits these real-time embedded designs. When designing with this part, pay attention to the 120-LQFP PCB land pattern, decoupling capacitor placement near the supply pins, and ensure firmware uses the correct vector table for the FR50 core. Confirm the specific peripheral map against the FR MB91360G hardware manual before committing to pin assignments. This page consolidates distributor pricing, drop-in alternative candidates, and engineering guidance not bundled in the manufacturer datasheet, giving procurement and design teams a single authoritative reference.

Cotação Contato
MB91F467DBPVSR-GSE2 - 32-Bit FR60 RISC MCU 96MHz | Infineon
MB91F467DBPVSR-GSE2

MB91F467DBPVSR-GSE2 - 32-Bit FR60 RISC MCU 96MHz | Infineon

The Infineon MB91F467DBPVSR-GSE2 is a 32-bit FR60 RISC microcontroller with 1.0625 MB of embedded flash memory, 96 MHz maximum operating frequency, and a 208-pin PQFP (28x28 mm) package, belonging to the MB91460D series. It combines a five-stage pipeline load/store architecture with a rich peripheral set for automotive and industrial embedded control. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (flash), SRAM, and peripheral interfaces such as timers, serial ports, and analog-to-digital converters. Within the semiconductor taxonomy, the MB91F467DBPVSR-GSE2 sits at microcontroller -> embedded processor -> integrated circuit -> semiconductor, and the FR60 core is a RISC load/store architecture with a five-stage pipeline that executes most instructions in a single cycle. Key features include 1.0625 MB (1.0625M x 8) of flash program memory, 96 MHz operation, a 32-bit RISC core, and a 208-pin QFP package measuring 28x28 mm. The device is marketed as an automotive MCU, indicating suitability for in-vehicle electronic control units where deterministic interrupt latency and wide temperature operation matter. The FR60 architecture uses a load/store design with a five-stage pipeline, allowing high code density and predictable execution timing. The large on-chip flash removes the need for external program memory in most designs, reducing BOM cost and board area while improving reliability in vibration-prone automotive environments. Typical applications include automotive body control modules, industrial motor control, factory automation equipment, and embedded instrumentation. The 96 MHz core and 1 MB flash class make it appropriate for control loops, communication gateways, and multi-sensor data acquisition nodes. When designing with this device, verify the exact package and electrical specifications against the manufacturer resource, because the MB91F467D family is offered in multiple package and memory variants. Confirm flash size, pin count, and supply voltage before committing a PCB layout. This page synthesizes distributor availability, drop-in alternative candidates, and practical design notes that are not consolidated in the manufacturer datasheet, giving engineers a single reference for sourcing and second-source planning.

Cotação Contato
MB91F526LKCPMC-GSE2 - 80MHz FR81S Auto MCU 1MB Flash | Infineon
MB91F526LKCPMC-GSE2

MB91F526LKCPMC-GSE2 - 80MHz FR81S Auto MCU 1MB Flash | Infineon

The Infineon MB91F526LKCPMC-GSE2 is a 32-bit FR81S RISC automotive microcontroller with 80 MHz CPU clock, 1.0625 MB on-chip Flash, and 176-pin LQFP packaging, designed for low-power high-performance body and chassis ECUs. It operates across 2.5V/3.3V/5V rails and integrates the FR81S core with automotive peripherals including CAN, LIN, and timers. Key features include 1.0625 MB (1.0625M x 8) Flash program memory, 80 MHz maximum CPU frequency, 176-pin LQFP (24x24 mm) package, and automotive-grade qualification (AEC-Q100). The device supports 2.5V, 3.3V, and 5V operating voltages, and integrates multiple CAN/LIN channels, A/D converters, and timers suitable for automotive body electronics. Per the Arrow listing, the part is supplied in tray packaging. Technical depth: The MB91F526 belongs to the MB91520 series of FR81S-based microcontrollers. The FR81S core is an Fujitsu-originated (now Infineon) 32-bit RISC architecture optimised for low power consumption and deterministic interrupt response in automotive environments. The 1.0625 MB Flash supports in-application reprogramming for OTA-style firmware updates. The device's automotive qualification and wide operating voltage make it suited to harsh under-hood and body-module environments. Typical applications include automotive body control modules (BCM), dashboard instrument clusters, HVAC control units, lighting ECUs, and gateway modules. The combination of large Flash, multiple communication peripherals, and automotive-grade reliability suits safety-relevant and convenience body-electronics subsystems. Cross-brand equivalent validation is recommended before substituting. Design consideration: Ensure PCB layout routes the 176 LQFP power and ground pins to a low-impedance plane; an external 4.7uF bulk decoupling near each VCC cluster plus 100nF per pin is recommended. Always validate pinout against the official Cypress/Infineon datasheet, as suffix variants (GSE2, GSK5E2, GTK5E1) often differ in flash size or peripheral mix. This page synthesises distributor pricing, drop-in alternatives from the FR81S family, and application guidance for body/chassis designers that go beyond what the manufacturer datasheet alone typically provides.

Cotação Contato
MB91F526LKCPMC-GSK5E2 - 32-bit FR81S MCU 1.0625MB Flash | Infineon
MB91F526LKCPMC-GSK5E2

MB91F526LKCPMC-GSK5E2 - 32-bit FR81S MCU 1.0625MB Flash | Infineon

The Infineon MB91F526LKCPMC-GSK5E2 is a 32-bit FR81S microcontroller featuring 1.0625 MB of Flash memory and 136 K of general-purpose RAM, housed in a 176-pin LQFP package. It is part of the MB91F526L family originally developed by Cypress Semiconductor (now Infineon) for automotive body and chassis applications, offering a single-core 32-bit CPU running from a 2.7 V to 5.5 V supply with on-chip regulator and power management. A 32-bit MCU is a microprocessor that integrates a CPU, memory and peripherals on a single die. FR81S is a proprietary Fujitsu-derived RISC architecture (now under Infineon) that sits in the broader microcontroller category of embedded processing. Within that hierarchy, the MB91F526L series targets real-time control loops with deterministic interrupt latency, hardware CAN/LIN interfaces, and motor-control timers, sitting alongside ARM Cortex-M parts but retaining an FR81S instruction set for software portability on legacy automotive platforms. Key features include up to 80 MHz core operation, hardware CAN 2.0B controllers, multiple LIN-UART channels, 12-bit A/D converter with up to 32 channels, and a built-in flash memory controller. The wide 2.7 V–5.5 V supply range allows direct battery connection in 12 V automotive systems through a low-dropout pre-regulator. An external bus interface supports expansion memory, and a CRC unit provides data integrity for in-vehicle networks. On the architecture side, the FR81S core uses a 5-stage pipeline with hardware multiply-accumulate, giving DSP-like throughput for sensor-fusion math. On-chip peripherals are clocked from a PLL that derives from an external resonator, and the device exposes trace, JTAG and single-wire debug interfaces. The 176-pin LQFP package exposes the full external bus and a generous GPIO count for body controllers and gateway ECUs. Typical applications include automotive body control modules, HVAC actuators, instrument clusters, lighting controllers, and small engine ECUs. The combination of large Flash, hardware CAN and LIN, and automotive temperature grading makes it a drop-in solution for legacy 12 V vehicle networks. When designing with this part, allocate the LQFP's thermal pad to a continuous ground copper pour and bypass each supply pin with a 100 nF ceramic capacitor placed within 3 mm of the pin. For CAN bus termination, follow ISO 11898-2 with a 120 ohm resistor and common-mode choke. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single source for engineering decisions.

Cotação Contato
MB96F315 - 16-Bit 56MHz Microcontroller | Fujitsu Semiconductor
MB96F315

MB96F315 - 16-Bit 56MHz Microcontroller | Fujitsu Semiconductor

The Fujitsu Semiconductor MB96F315 is a 16-bit proprietary microcontroller in the F²MC-16FX family, operating at up to 56 MHz and integrating 160 KB of flash memory in a 48-LQFP 7 x 7 mm package. It is identified by distributor records as the MB96310 device with 160K x 8 flash organization. The MCU combines a high-performance 16-bit core, embedded flash, and embedded peripherals for compact embedded-control systems. A microcontroller is a programmable semiconductor device that integrates a CPU core, memory, timers, serial interfaces, analog or digital I/O, and support logic on one chip. The proprietary F²MC architecture provides a platform for motor control, industrial equipment, consumer appliances, and embedded automation, while the MB96F315 family targets designs requiring deterministic control and substantial on-chip flash without an external memory device. The verified distributor description specifies a maximum clock frequency of 56 MHz, 160 KB of flash memory, and a 48-LQFP package measuring 7 x 7 mm. The package combines a compact footprint with externally accessible I/O and is suitable for space-constrained boards requiring a high pin count and on-chip program storage. Exact peripheral inventory, voltage range, RAM size, timer resources, and electrical limits require confirmation in the manufacturer datasheet. The F²MC-16FX architecture is relevant to motor-control and industrial-control designs because it supports embedded control loops without requiring a separate high-performance processor. In a motor-control system, the MCU can execute control algorithms, manage input capture, operate timers, and communicate with supervisory electronics. The 56 MHz operating speed provides a defined performance class for embedded software, while 160 KB flash provides room for application code and constants. Typical implementation areas include industrial motor controllers, inverter or drive interfaces, appliance control boards, power-conversion control, and compact automation modules. Designers should verify the exact peripheral set, operating voltage, package pin assignments, and timing requirements before releasing a production design. The 48-LQFP package also requires careful thermal and PCB layout planning. For a new design, begin with the MB96F315 datasheet and confirm that the required timers, serial channels, analog functions, interrupt resources, and memory map match the application. The verified data does not include pricing, stock status, pin names, or a complete electrical characterization, so those values should be obtained from the manufacturer or an authorized distributor before procurement. This product record consolidates verified distributor specifications, family identification, package data, and sourcing links with practical design guidance. It does not invent missing electrical values and clearly identifies parameters that require datasheet confirmation.

Cotação Contato
MB96F315RSBPMC-GSE2 - 16-Bit 56MHz 160KB Flash MCU
MB96F315RSBPMC-GSE2

MB96F315RSBPMC-GSE2 - 16-Bit 56MHz 160KB Flash MCU

The Infineon Technologies MB96F315RSBPMC-GSE2 is a 16-bit F²MC-16FX microcontroller operating up to 56 MHz, with 160 KB of embedded Flash memory in a 48-LQFP 7 x 7 mm package. It is based on the Fujitsu 16FX architecture and is designed for embedded control applications requiring CAN/LIN networking, timer and PWM control, and DMA-assisted data movement. The device uses 0.18 µm CMOS technology and is identified with the MB96310 series designation. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, timers, communication peripherals, and I/O into one component. This device belongs to the 16-bit embedded MCU category rather than an 8-bit or high-end application processor category. Its RISC-like instruction pipeline and controller-oriented instruction set support efficient real-time control while handling multiple peripheral functions. Key verified features include a maximum internal clock frequency of 56 MHz, 160 KB Flash memory, a 48-LQFP package, and operation from 3.0 V to 5.5 V. The MB96F315 family provides CAN and LIN networking capability, timer/PWM resources, and DMA support. The supplied search data identifies 14 PWM channels, 3 timers, 36 I/O ports, and an operating temperature range from -40 °C to +125 °C. The F²MC-16FX core uses a 17.8 ns instruction cycle time according to the manufacturer data excerpt. Its instruction set covers bit, byte, word, and long-word data types, 23 addressing modes, and barrel-shift operations. These characteristics make it suitable for motor control, industrial interfaces, automotive networking, and other embedded systems where deterministic peripheral handling matters. Typical applications include CAN or LIN network nodes, motor and actuator controllers, timer-based control systems, DMA-assisted data acquisition, and general industrial embedded control. The 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V system designs, subject to the complete datasheet requirements. Designers should verify the exact peripheral configuration, pin multiplexing, clock requirements, programming method, and electrical limits in the MB96310-series datasheet before layout or firmware development. The LQFP package also requires attention to thermal performance and exposed-pad or thermal-relief practices where applicable. This page consolidates verified distributor and manufacturer-search data with practical selection context, helping engineers identify whether the MB96F315RSBPMC-GSE2 fits the required 16-bit control, networking, memory, package, and supply-voltage constraints.

Cotação Contato
MB9BF416NPMC-G-JNE2 - 144MHz Cortex-M3 MCU 512KB Flash | Infineon
MB9BF416NPMC-G-JNE2

MB9BF416NPMC-G-JNE2 - 144MHz Cortex-M3 MCU 512KB Flash | Infineon

The Infineon MB9BF416NPMC-G-JNE2 is an ARM Cortex-M3 32-bit microcontroller from the FM3 MB9B410R high-performance series, integrating 512 KB of flash memory and 64 KB of SRAM in a 100-pin LQFP (14x14 mm) package. It operates at a maximum clock frequency of 144 MHz, supports 3.3 V / 5 V supply, and provides a rich set of on-chip peripherals including CAN and LIN interfaces for automotive and industrial networking. What is an FM3 microcontroller? The FM3 family is Infineon's (originally Cypress's) line of 32-bit ARM Cortex-M3 microcontrollers positioned between low-end Cortex-M0/M0+ parts and high-performance Cortex-M4 devices. FM3 MCUs target cost-sensitive real-time applications with deterministic interrupt response, scalable Flash/RAM configurations, and integrated analog (ADC, DAC) and connectivity (CAN, LIN, USB, Ethernet) peripherals. The MB9BF416N sits in the MB9B410R sub-series which adds high-speed motor-control timers, complementary PWM outputs, and quadrature encoder interfaces for industrial drives. Key differentiating features include 144 MHz Cortex-M3 core, 512 KB flash, 64 KB SRAM, integrated CAN 2.0B and LIN 2.x controllers, 16-channel ADC, motor-control timer/PWM block, 100-pin LQFP with on-chip trace support, and wide 2.7 V to 5.5 V operating voltage range. The 100-pin LQFP footprint provides ample GPIO for multi-axis motor control and industrial sensor interfacing. The MB9BF416N uses the Cortex-M3 Harvard architecture with single-cycle multiply and hardware divide, enabling deterministic control-loop execution under 1 microsecond at 144 MHz. Its dual-bank flash supports in-field firmware updates via the bootloader, while the embedded CAN/LIN MACs allow protocol handling without CPU intervention. The high-resolution motor-control timer block generates complementary 3-phase PWM with programmable dead-time insertion for variable-frequency drives. Typical applications include BLDC/PMSM motor drives, industrial servo controllers, HVAC fan and pump controllers, automotive body electronics via CAN/LIN, factory automation PLCs, and home-appliance control boards. The combination of CAN/LIN and motor-control peripherals makes it particularly well-suited for mechatronic systems where networking and motion control co-exist. When designing with this device, pay attention to the external crystal selection and PLL configuration to achieve the full 144 MHz operation, and ensure proper decoupling on the analog supply pins to minimize ADC noise coupling into motor-current feedback paths. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes for the MB9BF416NPMC-G-JNE2 not found in the manufacturer datasheet alone.

Cotação Contato
MB9BF416RPMC-G-JNE2 - 512KB Flash Cortex-M3 MCU, 120-LQFP | Infineon
MB9BF416RPMC-G-JNE2

MB9BF416RPMC-G-JNE2 - 512KB Flash Cortex-M3 MCU, 120-LQFP | Infineon

The Infineon MB9BF416RPMC-G-JNE2 is a 32-bit ARM Cortex-M3 microcontroller in the FM3 MB9B410R family, delivering 144 MHz maximum CPU clock with 512 kByte on-chip Flash and 64 kByte SRAM. It is housed in a 120-pin LQFP (16x16 mm) package and supports a 2.7 V to 5.5 V operating voltage range, suiting both 3.3 V and 5 V system designs. According to the Cypress/Infineon datasheet (Document Number 002-05615 Rev. *D), this device also integrates CAN and LIN networking peripherals, multi-function timer/PWM blocks, and a 12-bit A/D converter. What is an FM3 microcontroller? FM3 is the original Cypress (now Infineon) FM3 family of 32-bit ARM Cortex-M3 microcontrollers, designed as a high-performance upgrade path from 8/16-bit MCUs. FM3 sits within the broader hierarchy: microcontroller -> embedded MCU -> 32-bit ARM Cortex-M MCU -> FM3 family -> peripheral-rich industrial-grade MCU. The FM3 family targets industrial motor control, factory automation, and consumer appliance designs where deterministic real-time performance and rich analog integration matter more than ultra-low-power wireless features. Key differentiating features include the 144 MHz Cortex-M3 core (with MPU), 512 kByte Flash / 64 kByte SRAM memory complement, dual CAN + LIN bus interfaces for in-vehicle networking, up to 16 channels of 12-bit ADC with up to 1 µs conversion, and multi-function timers supporting complementary PWM outputs for 3-phase motor control. The part operates from -40 °C to +105 °C, making it suitable for industrial and automotive-grade thermal environments. The MB9BF416RPMC-G-JNE2 uses a Harvard-bus architecture with tightly-coupled SRAM and Flash accelerators. The 144 MHz Cortex-M3 delivers 1.25 DMIPS/MHz, providing ~180 DMIPS peak. The peripheral DMA, interrupt controller (NVIC), and 12-bit ADC with scan-mode support enable deterministic motor-control loops at sub-microsecond latency. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), factory automation controllers (PLC, sensor hubs), automotive body ECUs with CAN/LIN networking, HVAC control boards, and home-appliance main boards. The integrated CAN/LIN and rich PWM make it a strong fit for cost-sensitive industrial-control and automotive-body platforms. When designing with this device, ensure the 120-LQFP land pattern and 4-layer PCB stack-up provide adequate copper area for thermal dissipation in high-CPU-activity workloads. Use the Infineon/Keil/IAR toolchain plus the dedicated MB9B410R peripheral library to enable rapid firmware bring-up. This page synthesizes distributor pricing, same-package drop-in alternatives (e.g., CY9BF416RPMC-G-JNE2, MB9BF416NPMC-G-JNE2), and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MB9EF226 - 32-bit ARM Cortex-R4 MCU, 128MHz, 2MB Flash | Infineon
MB9EF226

MB9EF226 - 32-bit ARM Cortex-R4 MCU, 128MHz, 2MB Flash | Infineon

The Infineon MB9EF226 is a 32-bit ARM Cortex-R4 microcontroller from the Titan family, operating at up to 128 MHz with 2 MB of embedded Flash in a 176-pin LQFP package. The device integrates high-performance processing for real-time control applications, with the Cortex-R4 core delivering RISC-like instruction throughput and deterministic interrupt response. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and peripherals. Within the broader semiconductor taxonomy, MCUs belong to integrated circuits, then to embedded processors, then to the power management hierarchy of system-on-chip devices. The MB9EF226 sits at the high-performance end of automotive-grade Cortex-R MCUs, bridging the gap between Cortex-M microcontrollers (used for general embedded control) and Cortex-A application processors (used for OS-heavy workloads). Key features include 128 MHz Cortex-R4 core with FPU support, 2 MB Flash and substantial SRAM, automotive-grade qualification under AEC-Q100, and a rich peripheral set including multiple CAN-FD interfaces, Ethernet, USB, and FlexRay. The wide operating voltage range and extended temperature capability make the device suitable for chassis and powertrain ECUs. Architecturally, the MB9EF226 uses the Titan platform with tightly coupled memory for deterministic latency. The Cortex-R4 core implements branch prediction and dual-issue capability for sustained high code density at clock speed. Hardware floating-point support accelerates sensor fusion and motor-control vector math. Typical applications include automotive body controllers, electric vehicle battery management systems (BMS), industrial motor drives, and safety-critical PLCs. The MB9EF226 is also commonly deployed in HVAC control modules where deterministic CAN-FD communication is required. When designing with this part, ensure your firmware toolchain supports Cortex-R4 (such as ARM DS-5 or IAR EWARM for Cortex-R). Decoupling capacitor placement around the 176-LQFP power pins is critical - use at least four 100 nF ceramics distributed across the package perimeter. This page consolidates distributor pricing, verified alternatives from the same Titan family, and practical PCB-layout guidance not found in the standalone manufacturer datasheet, giving engineers a faster path from selection to prototype.

Cotação Contato
MB9EF226PMC-GSE2 - 128MHz ARM Cortex-R4 MCU 2MB Flash | Infineon
MB9EF226PMC-GSE2

MB9EF226PMC-GSE2 - 128MHz ARM Cortex-R4 MCU 2MB Flash | Infineon

The Infineon MB9EF226PMC-GSE2 is an ARM Cortex-R4 32-bit microcontroller from the FCR4 MB9EF226 family, operating at 128 MHz and integrating 2 MB of flash memory in a 176-pin LQFP (24x24 mm) package. According to the manufacturer datasheet, this MCU targets real-time control and chassis/safety automotive applications, with industrial-grade temperature support. The part carries an Automotive MCU designation per the Mouser catalog entry and is supplied on tape-and-reel. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The MB9EF226PMC-GSE2 belongs to the Cortex-R4 family, which is optimized for deterministic real-time response rather than the application-processing focus of Cortex-A cores. Within the broader taxonomy, this device sits under MCU -> microcontroller -> embedded processor -> semiconductor IC, and within Infineon's automotive-safety portfolio it occupies the chassis/safety MCU segment. Key features include a 32-bit ARM Cortex-R4 core running up to 128 MHz, 2 MB of on-chip flash, industrial temperature grade, and a 176-pin LQFP package per the Partstack LFQFP/SQUARE/GULL WING terminal form. The device supports automotive real-time control use cases such as electric power steering, brake systems, and chassis domain controllers. The automotive MCU classification indicates qualification for vehicle electrical-environment conditions. The Cortex-R4 core delivers deterministic interrupt latency and tightly coupled memory, which is essential when the application must respond to a sensor input within microseconds. Combined with 2 MB of flash, the device can host a full real-time operating system plus application code without external memory expansion. The 176-pin LQFP provides abundant GPIO and peripheral pinout for motor-control PWM, CAN-FD, and analog front-end integration. Typical applications include automotive electric power steering, electronic stability control, brake-by-wire systems, chassis domain ECUs, and industrial real-time controllers that benefit from the deterministic Cortex-R4 profile. The wide pin count supports parallel sensor interfaces and multi-axis motor control. When designing with this MCU, allocate PCB thermal copper under the LQFP thermal pad and verify that the chosen debug probe (e.g. J-Link or Infineon DAP) matches the SWD/JTAG pinout. Always check the firmware version against the latest errata document before locking the design. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not found in the standalone datasheet, providing engineers with a single decision-ready reference.

Cotação Contato
MC-10105F1-821-FNA-M1-A - TPS-1 PROFINET IO SoC 100MHz | Renesas
MC-10105F1-821-FNA-M1-A

MC-10105F1-821-FNA-M1-A - TPS-1 PROFINET IO SoC 100MHz | Renesas

The Renesas Electronics MC-10105F1-821-FNA-M1-A is a TPS-1 family application-specific microcontroller / single-chip interface solution for PROFINET IO devices, integrating an ARM core with a dual-port Ethernet switch and supporting 100 Mbps full-duplex PROFINET communication. The device is housed in a 196-pin FPBGA package measuring 15 x 15 mm with 1.0 mm pitch, and is qualified for industrial operating conditions. A PROFINET IO device chip is an application-specific integrated circuit that bundles the industrial-Ethernet protocol stack, real-time (RT/IRT) media access, and a managed dual-port switch into a single silicon die so that field devices such as remote I/O blocks, variable-frequency drives, encoders, and identification readers can be designed without an external companion controller. Within the broader embedded-system hierarchy, this part sits at the junction of an industrial microcontroller (MCU), an Ethernet MAC/PHY block, and a deterministic-protocol accelerator, allowing OEMs to certify PROFINET conformance class C without writing low-level stack code from scratch. Key differentiating features include 196-BGA integration (no companion Ethernet controller needed), compliance with PROFINET specification V2.3 for real-time and isochronous real-time (IRT) classes, a 100 MHz ARM core, and Phoenix-Contact co-development with Renesas for guaranteed protocol interoperability. The dual-port integrated switch removes the need for an external PHY/MAC pair on simple star or line topologies common in field-cabinet wiring. Architecturally, the part pairs a 32-bit ARM Cortex-M-class CPU (100 MHz) with on-chip RAM, deterministic Ethernet media-access hardware, and a PROFINET IO device firmware load supplied by Renesas. This division of labor lets the host application processor focus on device-specific I/O while the TPS-1 handles cut-through switching, RT/IRT scheduling, and PROFINET alarm generation with deterministic cycle jitter below 1 µs per the device specification. Typical applications include PROFINET-IO remote I/O blocks, frequency-inverter / variable-frequency drive fieldbus interfaces, encoder and absolute-position sensor gateways, RFID-reader PROFINET nodes, and modular I/O stations in factory automation. The 100 Mbps full-duplex bandwidth comfortably exceeds typical PROFINET RT cycle times of 1 ms. When designing in the MC-10105F1-821-FNA-M1-A, plan for a 1.0 mm pitch BGA land pattern with controlled-impedance differential pairs for the MII/RGMII Ethernet traces and a 25 MHz reference crystal. Thermal management is straightforward at industrial ambient temperatures because the part is fabricated in a low-power CMOS process optimized for fan-less DIN-rail mounting. This page synthesizes distributor pricing, protocol-compliance scope, and application notes not consolidated on the manufacturer product page, helping industrial-automation design engineers evaluate the MC-10105F1-821-FNA-M1-A for PROFINET IO device integration as of 2026-10-09.

Cotação Contato
MC11E1CPBE2 - 8-Bit ROMless 2 MHz MCU | NXP | 52-LQFP
MC11E1CPBE2

MC11E1CPBE2 - 8-Bit ROMless 2 MHz MCU | NXP | 52-LQFP

The NXP Semiconductors MC11E1CPBE2 is an 8-bit ROMless HC11 microcontroller operating at up to 2 MHz, with 512 bytes of RAM, 38 I/O pins, and a 52-LQFP package measuring 10 x 10 mm. It is designed for embedded control systems requiring a compact processor, digital I/O, and automotive-oriented industrial-temperature capability. A microcontroller is a semiconductor device that integrates a CPU core, memory, input/output ports, timers, and communication interfaces on one integrated circuit. In the broader hierarchy, this MC11E1CPBE2 is an 8-bit microcontroller, part of the HC11 family, and belongs to the embedded-microcontroller and semiconductor categories. Its ROMless architecture allows the application firmware to be supplied by external memory or a programming system, supporting applications where program-memory requirements vary or field programming is required. Verified distributor data identifies the MC11E1CPBE2 as an HC11 microcontroller with a 2 MHz speed grade, ROMless configuration, 512 x 8 RAM, 38 I/O, internal oscillator, and a 52-LQFP package. The 52-terminal gull-wing package is surface-mountable and uses a 10 x 10 mm outline. Because it is ROMless, designers must verify the external memory interface and programming architecture against the original system requirements before replacing or upgrading an existing design. Typical applications include automotive electronic control units, motor and actuator controllers, sensor interfaces, industrial automation equipment, and legacy embedded systems that depend on the M68HC11 CPU architecture. The 38-I/O count provides useful connectivity for digital sensors, switches, relays, communication transceivers, and control signals. The 2 MHz CPU speed is suitable for control-loop and supervisory tasks rather than high-bandwidth signal processing or modern high-performance applications. The primary design consideration is legacy software compatibility. Firmware timing, interrupt priorities, memory-mapped peripherals, external bus behavior, and package-level routing must be preserved during any replacement. Engineers should obtain the manufacturer datasheet and verify the exact pinout, electrical limits, oscillator connections, reset requirements, and programming procedure before committing to a new PCB design. This product data summarizes verified distributor specifications, package information, sourcing references, and design considerations. It does not invent electrical limits, memory-map details, or a cross-brand substitute when the supplied web results do not establish one.

Cotação Contato
MC56F8002VWL - 16-bit 56800E DSC, 32MHz, 12KB Flash 28-SOIC | NXP
MC56F8002VWL

MC56F8002VWL - 16-bit 56800E DSC, 32MHz, 12KB Flash 28-SOIC | NXP

The NXP MC56F8002VWL is a 16-bit Digital Signal Controller (DSC) from the MC56F800x family, built on the 56800E core architecture. It delivers 32 MHz of CPU clock speed (per DigiKey/NXP listing) and integrates 12 KB (6K x 16) of on-chip Flash program memory alongside a 28-pin SOIC package with 23 general-purpose I/O pins. The part operates from a 1.8 V to 3.6 V supply range, making it well suited to low-voltage embedded designs. A Digital Signal Controller (DSC) is a hybrid class of programmable device that combines the deterministic interrupt response and peripheral integration of a microcontroller with the Multiply-Accumulate (MAC) engine and Harvard bus structure of a Digital Signal Processor (DSP). The 56800E core executes instructions in a single cycle where possible and is positioned in the taxonomy as: DSC -> DSP/MCU hybrid -> microcontroller -> integrated circuit -> semiconductor. DSCs target real-time control loops where the math throughput of a DSP is needed but the application footprint, cost, and tool chain of an MCU are preferred. Key features of the MC56F8002VWL include the 56800E 16-bit core, 12 KB Flash program memory, 32 MHz maximum core frequency, 23 GPIO lines, and a supply range of 1.8 V to 3.6 V. The integrated peripheral set reduces external component count in motor, lighting, and power-conversion designs. According to the NXP MC56F8006/MC56F8002 reference manual, the family integrates peripherals such as timers, PWM modules, ADCs, and communication interfaces configured per the variant. Architecturally, the 56800E core uses a dual Harvard memory structure with separate program and data buses, allowing simultaneous fetches that improve sustained throughput on control algorithms. The 12 KB Flash is sufficient for closed-loop field-oriented motor control (FOC), digital lighting ballast loops, and small power-factor correction (PFC) firmware where deterministic performance is more important than raw memory size. Typical applications for the MC56F8002VWL include low-cost BLDC/PMSM motor drives, switch-mode power supplies (SMPS), digital LED lighting ballasts, appliance control boards, and small industrial control modules. The wide 1.8 V to 3.6 V supply and integrated analog peripherals make it attractive for power-conversion applications where a single IC handles both sensing and control. When designing with this part, ensure your firmware budget fits within 12 KB Flash plus available RAM, and check the variant's peripheral mix against your PWM, ADC, and communication requirements. NXP's CodeWarrior and the newer MCUXpresso DSC toolchains support this family, and engineers should plan for the variant-specific header files to avoid peripheral register mismatches. This page synthesizes distributor pricing, lifecycle signals, drop-in 56800E family alternatives, and practical design notes not found in the manufacturer datasheet alone. The NXP product page flags End-of-Life for MC56F8002VWL, so designers should review replacement and obsolescence options before committing the part to long-life programs.

Cotação Contato
MC56F8006MLC - 16-bit DSC, 56800E Core, 16KB Flash | NXP
MC56F8006MLC

MC56F8006MLC - 16-bit DSC, 56800E Core, 16KB Flash | NXP

The NXP MC56F8006MLC is a 16-bit digital signal controller (DSC) from the MC56F800x family, featuring a 56800E core operating at 64 MHz bus clock with 32 MHz core MIPS throughput, 16 KB of on-chip Flash memory, and a 32-pin LQFP package. The device integrates DSP-class signal-processing capability with microcontroller peripheral integration on a single die, targeting cost-sensitive real-time control applications. A Digital Signal Controller (DSC) is a hybrid device class that combines a microcontroller's deterministic peripheral handling with a digital signal processor's mathematical pipeline. The 56800E core belongs to the family: 56800E core -> DSC -> microcontroller -> embedded processor -> semiconductor. Compared with a traditional 8/16-bit MCU, a DSC adds hardware multiply-accumulate, single-cycle MAC, and Harvard-style bus architecture, allowing closed-loop control loops, power-conversion math, and sensor fusion to run on a single chip without an external DSP partner. The MC56F8006 sits at the entry level of NXP's DSC portfolio, designed for mathematically intensive yet price-sensitive applications. Key specifications include 16 KB Flash program memory, 1.8 V to 3.6 V single-supply operation, 23 general-purpose I/O (GPIO) pins, on-chip 12-bit ADC, PWM modules suitable for motor and power control, and serial interfaces including SCI, SPI, and I2C. The device includes an internal relaxed oscillator with PLL-based frequency multiplication to derive the 64 MHz system clock from lower-cost external references. The MC56F8006 uses a Harvard-style 56800E architecture with separate program and data buses, allowing simultaneous fetch and operand access. The integrated peripheral set includes timers, PWM, ADC, and communication blocks, eliminating external components and reducing BOM cost. Built-in boundary scan and JTAG support simplify factory test and in-field firmware updates. Typical applications include BLDC and PMSM motor control in appliance fans and pumps, digital power conversion (PFC, LLC, buck/boost), LED lighting ballasts with analog dimming, and low-end industrial sensor conditioning. The wide 1.8 V to 3.6 V supply range supports both 2.5 V and 3.3 V system rails, simplifying multi-rail designs. When designing, ensure JTAG pins are accessible for factory programming and that the internal relaxed oscillator accuracy is acceptable for the target application. For motor control, leverage the integrated PWM and ADC synchronization rather than external triggering to reduce latency and BOM cost. This page synthesizes distributor pricing, NXP product-page lifecycle notes, parametric comparison with related 56F8xxx devices, and design notes covering JTAG access, oscillator selection, and motor-control timing - content not collated in the bare manufacturer datasheet.

Cotação Contato
MC56F8006VLC - 16KB Flash 32MHz DSC | NXP 32-LQFP
MC56F8006VLC

MC56F8006VLC - 16KB Flash 32MHz DSC | NXP 32-LQFP

The NXP MC56F8006VLC is a 16-bit digital signal controller (DSC) from the 56800E core-based 56F800x family, integrating 16KB of Flash program memory, 32MHz maximum CPU clock, and a flexible peripheral set in a 32-pin LQFP package. It combines DSP-class signal processing throughput with microcontroller peripherals, targeting mathematically intensive real-time control applications such as digital power conversion, motor control, and sensor signal conditioning. What is a Digital Signal Controller? A DSC is a hybrid device that merges the deterministic math engine of a digital signal processor with the integrated peripherals and ease-of-use of a microcontroller. Architecturally, a DSC sits above a plain MCU in the embedded hierarchy (microcontroller -> digital signal controller -> DSP) and below a stand-alone DSP, occupying a sweet spot where signal-processing throughput must coexist with PWM, ADC, timers, and GPIO. The 56800E core uses a unified data/program memory map and a modified Harvard bus, with single-cycle MAC support that is essential for power-loop and field-oriented motor-control algorithms. Key features of the MC56F8006VLC include 16KB Flash (organized as 8K x 16), 2KB RAM, an internal Phase-Locked Loop for clock multiplication, multiple 16-bit timers, a 12-bit ADC, PWM modules suited for switch-mode power supplies, and serial peripherals (SCI, SPI, I2C). The device operates from 1.8V to 3.6V, supports industrial temperature range (-40C to +105C or -40C to +125C per device marking), and provides 23 general-purpose I/O pins. The LQFP-32 footprint offers 0.8mm pitch and an exposed-pad option on the family for improved thermal dissipation. Typical applications include digital DC/DC and AC/DC power converters, small BLDC and PMSM motor drives (fans, pumps, appliances), uninterruptible power supplies, induction cooking, smart sensors, and LED drivers with closed-loop current regulation. The combination of DSP math throughput, low BOM cost, and a familiar MCU development flow makes it a strong choice for cost-sensitive embedded control where 8-bit MCUs run out of headroom. When designing with this part, ensure the JTAG/OnCE debug interface is accessible on the board, allocate proper decoupling on AVDD/DVDD pins, and follow NXP's PCB layout guidance for the analog sections to keep ADC performance within spec. Note that NXP has issued End-of-Life notices for several 56F800x variants; engineers should verify lifecycle status before committing to new designs.

Cotação Contato
MC56F8006VLF - 16-Bit 32MHz DSC, 16KB Flash | NXP
MC56F8006VLF

MC56F8006VLF - 16-Bit 32MHz DSC, 16KB Flash | NXP

NXP Semiconductors MC56F8006VLF is a 16-bit digital signal controller with a 32 MHz 56800E core, 16 KB of flash memory, and a 48-LQFP 7 x 7 mm package. It combines digital signal processing with microcontroller peripherals for mathematically intensive, power-sensitive, real-time control applications. A digital signal controller, or DSC, is a processor category positioned between a conventional microcontroller and a digital signal processor. MC56F8006VLF executes real-time control algorithms while providing general-purpose peripherals and embedded flash in one integrated device. Its 56800E architecture is intended for motor-control, power-conversion, and industrial automation functions where deterministic control and compact embedded integration matter. The verified manufacturer material identifies a 16-bit processing core, 32 MHz operating frequency, and 16 KB flash memory. NXP describes the entry-level MC56F8006 and MCF56F8002 devices as cost-effective solutions for power-sensitive, real-time control applications. The family integrates peripherals to reduce external component count while preserving the responsiveness required by feedback-control systems. MC56F8006VLF is supplied in a 48-LQFP package, making it suitable for conventional surface-mount PCB assembly. Its 16 KB flash capacity is sufficient for compact control firmware, configuration data, and application-specific code. The 32 MHz clock and 16-bit architecture support fast mathematical processing, while the integrated peripheral set helps simplify designs that would otherwise require separate interface and control components. Typical applications include digital motor control, power-supply regulation, industrial inverter control, signal conditioning, and embedded instrumentation. The part is particularly relevant when a system needs deterministic digital filtering or feedback calculations but does not require a high-end digital signal processor. NXP’s product family positioning emphasizes mathematically intensive, power-sensitive control rather than general-purpose processing. For a new design, verify supply voltage, peripheral assignments, timing, pin multiplexing, programming requirements, and package-level constraints against the manufacturer datasheet before committing the PCB. Because MC56F8006VLF is identified as end-of-life by the NXP product page, engineers should also confirm availability, lifecycle status, and approved sourcing options before starting a production release. This page combines verified manufacturer identity, distributor specifications, lifecycle context, package information, and practical sourcing considerations. It is intended to help engineers locate the datasheet, assess the device’s real-time control role, and determine whether a legacy design requires migration planning.

Cotação Contato
MC56F8006VWLR - 16KB Flash 32MHz 56800E DSC | NXP
MC56F8006VWLR

MC56F8006VWLR - 16KB Flash 32MHz 56800E DSC | NXP

The NXP MC56F8006VWLR is a 16-bit 56800E-core Digital Signal Controller (DSC) that integrates the processing power of a DSP with the peripheral integration of a microcontroller, packaged in a 28-pin wide-body SOIC (SOIC-28-300mil). Per the manufacturer datasheet, it delivers up to 32 MIPS at 32 MHz core clock, with 16 KB of program Flash (organized as 8K x 16) and operates from a 1.8 V to 3.6 V supply. A Digital Signal Controller (DSC) is a hybrid device that occupies the architectural middle ground between a pure microcontroller (MCU) and a digital signal processor (DSP). It uses a modified Harvard architecture with a deterministic interrupt model, on-chip memory, and DSP-class multiply-accumulate instructions that allow closed-loop control loops to execute in a single instruction cycle. DSCs are widely used in digitally controlled switching power supplies, motor drives, sensor signal conditioning, and LED lighting where tight math latency matters more than raw GHz throughput. Key features of the MC56F8006 include 16 KB Flash / 2 KB RAM, a 6-channel PWM module suitable for three-phase or multi-channel DC/DC control, a 12-bit ADC, 23 GPIO lines, and on-chip relaxation oscillator. Integrated peripherals such as the programmable interval timer, queued serial peripheral interface (QSPI), and inter-integrated circuit (I2C) interface reduce external component count, lowering both BOM cost and PCB area. The device is qualified to -40 °C to +105 °C industrial temperature range. Architecturally, the 56800E core couples a unified data/program address space with dual operand fetches per cycle, enabling one-cycle MAC instructions that close PI or state-observer loops in motor-control firmware well within 32 MHz. The on-chip voltage regulator generates logic-level rails from the 1.8 V to 3.6 V external supply, simplifying analog/digital supply partitioning. Typical applications include switched-mode power supplies (SMPS), digital motor control (BLDC, PMSM, and stepper), solar micro-inverters, smart LED drivers, and industrial sensor conditioning. The wide operating voltage and industrial temperature grade also suit 12 V/24 V automotive-body and appliance platforms. A key design consideration is Flash endurance: typical 10,000 write/erase cycles per sector constrain in-application firmware updates. Designers should reserve a bootloader sector and follow NXP's recommended erase-modify-write sequence. This page synthesizes distributor pricing, parametric comparison against drop-in alternatives, and practical design guidance not typically consolidated on a single manufacturer datasheet.

Cotação Contato
MC56F8013VFAE - 16-Bit 32MHz DSC, 16KB Flash, LQFP-32 | NXP
MC56F8013VFAE

MC56F8013VFAE - 16-Bit 32MHz DSC, 16KB Flash, LQFP-32 | NXP

The NXP MC56F8013VFAE is a 16-bit digital signal controller (DSC) in the 56800E 56F8xxx family, delivering 32 MHz core performance with 16 KB (8K x 16) of on-chip Flash and a 32-pin LQFP (7x7 mm) package. It integrates the computational power of a DSP with the peripheral set of a microcontroller on a single die, targeting cost-sensitive embedded control applications. The device operates from a 3.3 V supply and is qualified to AEC-Q100 for automotive deployments. What is a Digital Signal Controller? A Digital Signal Controller (DSC) is a hybrid class of embedded processor that combines microcontroller (MCU) peripherals and interrupt-driven control with the deterministic numeric throughput of a digital signal processor (DSP). In the system hierarchy, a DSC sits between a general-purpose MCU (e.g., ARM Cortex-M0) and a standalone DSP (e.g., TI C6000). DSCs are widely used in motor control, power conversion, and sensor-fusion applications where both deterministic control loops and arithmetic DSP kernels are required on one chip. The 56800E core used in the 56F8013 family adds a Harvard-style memory architecture and single-cycle MAC operations typical of DSP cores. Key features of the MC56F8013 include 16 KB Flash, 4 KB RAM, a 32 MHz 56800E core with single-cycle 16-bit multiply-accumulate, dual 6-channel PWM modules for motor drive, two 12-bit ADCs with up to 8 channels, and communication peripherals including SCI, SPI, and I2C. The 56F8013 derivative adds a CAN 2.0 A/B module versus the lower-feature 56F8011 sibling. On-chip regulators and a low-power Stop mode reduce quiescent draw for battery-connected systems. Typical applications span BLDC/PMSM motor drives (drones, e-bikes, appliances), digital switched-mode power supplies (PFC + LLC), automotive sensor interfaces, and industrial servo loops. The 56800E instruction set is C-friendly and supported by NXP's CodeWarrior and the newer MCUXpresso toolchain plus Processor Expert graphical configuration. Design considerations: maintain a clean analog ground island for ADC accuracy, place the 3.3 V decoupling network within 5 mm of the supply pins, and verify PWM timing closure against the application's control-loop rate. The LQFP-32 footprint allows hand-soldering and rework on prototype boards.

Cotação Contato
MC56F8014VFAE - 32MHz 16-Bit DSC with 32KB Flash | NXP
MC56F8014VFAE

MC56F8014VFAE - 32MHz 16-Bit DSC with 32KB Flash | NXP

The NXP Semiconductors MC56F8014VFAE is a 16-bit digital signal controller microcontroller operating at up to 32 MHz, with 32 KB of flash memory, 8 KB RAM, PWM outputs, and COP/LVD support in a 32-LQFP (7x7 mm) package. It combines DSP and MCU functionality in the 56800E architecture, making it suitable for real-time motor-control and embedded signal-processing systems. A digital signal controller is a microcontroller architecture optimized for deterministic control loops and computationally intensive signal processing. The MC56F8014 combines a 16-bit core, programmable peripherals, ADC channels, PWM, and watchdog-related supervisory functions within one integrated device. Its dual Harvard-style architecture uses multiple execution units to support parallel instruction operations and efficient C-based control code. The verified device information identifies a maximum core frequency of 32 MHz, 32 KB program flash, and 8 KB RAM. The controller also includes one 5-channel PWM module and two 4-channel 12-bit ADC modules according to the supplied technical description. These resources support motor-control loops, digital power conversion, measurement systems, and embedded automation products. COP and low-voltage detection functions help supervise system operation and supply conditions. The MC56F8014VFAE is packaged in a 32-LQFP, 7x7 mm surface-mount package. The 32 MHz operating point provides a balance between control-loop responsiveness and embedded resource consumption, while the unified DSP/MCU architecture can reduce the need for separate general-purpose logic and signal-processing components. Exact pin functions, electrical limits, memory organization, timing, and peripheral behavior should be confirmed in the NXP 56F8014 technical data sheet. Typical applications include brushless DC motor control, digital motor controllers, power-conversion control, industrial automation, and embedded control systems with analog feedback. The 12-bit ADC resources suit sensor and current-voltage feedback, while PWM outputs support actuator and power-stage timing. CodeWarrior-oriented development and the MCU-style programming model support embedded firmware integration. Designers should verify the complete pin multiplexing, voltage limits, clock configuration, ADC conversion timing, PWM dead-time requirements, and package-level thermal conditions against the manufacturer datasheet before layout or firmware release. This page consolidates the supplied manufacturer, distributor, and cross-reference information while clearly identifying parameters that require datasheet confirmation.

Cotação Contato
MC56F8025VLD - 16-bit DSC, 56800E core, 32KB Flash, 32MHz, 44-LQFP
MC56F8025VLD

MC56F8025VLD - 16-bit DSC, 56800E core, 32KB Flash, 32MHz, 44-LQFP

The NXP MC56F8025VLD is a 16-bit Digital Signal Controller (DSC) built on the 56800E core, combining DSP performance with MCU-style peripheral integration, housed in a 44-pin LQFP (10x10 mm) package. It delivers up to 32 MIPS at 32 MHz, integrates 32 KB of program Flash and 8 KB of unified RAM, and targets cost-sensitive digital motor control and power conversion designs. The 56800E dual Harvard architecture features three parallel execution units capable of up to six operations per instruction cycle. A Digital Signal Controller (DSC) is a hybrid device that fuses a microcontroller's deterministic peripheral set with a digital signal processor's MAC engine and single-cycle arithmetic units. In the system hierarchy it sits between microcontrollers (MCUs) and full digital signal processors (DSPs), and is itself a member of the broader power management and embedded control IC family. The 56800E family includes 16-bit fixed-point MAC, hardware DO loops, and an MCU-friendly programming model that compiles cleanly from C, enabling rapid DSP code generation without manual assembly tuning. Key features include dual 12-bit successive-approximation ADCs with up to 8 input channels, two PWM modules with six complementary outputs suitable for 3-phase motor drive, one quad-timer, two SCI (UART) ports, one SPI port, one I2C port, and an on-chip relaxation oscillator. The device operates from a 3.0 V to 3.6 V supply across -40 C to +105 C, with internal 2.5 V regulator-derived logic supply and brown-out reset. The 44-LQFP package provides 32 GPIO with high-current sink/source capability for direct gate-driver interface. Typical applications include low-cost BLDC and PMSM motor drives (appliance fans, pumps, small HVAC blowers), digital PFC and LLC power conversion front-ends, solar micro-inverter control loops, induction cookware quasi-resonant converters, and LED lighting ballast controllers. NXP's Processor Expert and FreeMASTER tooling provides auto-generated peripheral drivers and a real-time variable watch for in-circuit tuning, dramatically shortening the firmware design cycle. A practical design consideration: route the analog ADC reference (VREF) and analog supply (VDDA) separately from the noisy digital supply (VDD), and place the 1 uF and 0.1 uF decoupling pair within 3 mm of each supply pin. Avoid running PWM switching traces under the analog ADC input traces to minimize coupled noise.

Cotação Contato
MC56F8027MLH - 16-Bit Automotive Digital Signal Controller
MC56F8027MLH

MC56F8027MLH - 16-Bit Automotive Digital Signal Controller

The NXP Semiconductors MC56F8027MLH is a 16-bit digital signal controller combining an MCU-style programming model with dedicated DSP execution resources. The device is associated with the 56800E dual Harvard-style core architecture, whose three parallel execution units can perform as many as six operations per instruction cycle. MC56F8027MLH is packaged in a 64-terminal square gull-wing LFQFP package measuring 10 mm by 10 mm and is identified as automotive-grade in the verified distributor data. A digital signal controller is a microcontroller optimized for real-time control and signal-processing workloads. Unlike a general-purpose microcontroller, it integrates execution resources and instructions that improve throughput for operations such as filtering, control-loop calculation, waveform processing, and mixed control-plus-DSP tasks. Within the embedded-device hierarchy, the MC56F8027MLH is a microcontroller, an embedded processor, and a real-time signal-processing controller. The verified NXP datasheet identifies MC56F8027MLH as part of the 56F8000 family of 16-bit digital signal controllers. Its architecture supports parallel operation, while its MCU-oriented programming model and optimized instruction set are designed to generate efficient DSP and control code. This combination makes the controller relevant to automotive electronics, motor and motion control, industrial automation, consumer equipment, and other embedded systems that must combine deterministic control with real-time signal processing. The three execution units operate in parallel within a dual Harvard-style architecture. According to the NXP manufacturer datasheet, this arrangement allows as many as six operations per instruction cycle, while the instruction set is designed for efficient use by C compilers. This provides a clearer software and hardware rationale than treating the device only as a conventional MCU: control-loop code and arithmetic signal-processing operations can share one programmable platform. Typical application areas include motor control, power conversion, industrial automation, automotive body or accessory electronics, audio and communication signal processing, and compact embedded instruments. Suitability depends on the exact peripheral configuration, memory variant, clock requirements, voltage range, temperature grade, and package-specific pin functions listed for the ordered device. Those detailed operating limits and resources must be confirmed in the NXP datasheet before schematic or firmware commitment. When designing a board, route all 64 terminals according to the package pinout and preserve the required power, ground, clock, programming, and signal-conditioning connections. Firmware and peripheral use should follow the datasheet's startup, interrupt, timing, and low-power procedures. The combination of 16-bit digital signal control, parallel core execution, and a 64-lead automotive package makes MC56F8027MLH a specialized embedded platform rather than a general register-compatible substitute for unrelated microcontrollers. This page consolidates the verified package, architecture, lifecycle-relevant sourcing, and manufacturer-datasheet links while clearly separating unavailable specifications. Its practical value is the combination of application guidance, design cautions, and a transparent assessment of replacement availability for this specialized DSP-controller platform.

Cotação Contato
MC56F8027VLH - 16-Bit 32MHz DSC with 32KB Flash | NXP
MC56F8027VLH

MC56F8027VLH - 16-Bit 32MHz DSC with 32KB Flash | NXP

The NXP Semiconductors MC56F8027VLH is a 16-bit digital signal controller with a 56800E core, 32 KB flash memory, 32 MHz operating frequency, and a 64-LQFP package. It combines digital signal processing and microcontroller functions for embedded control, industrial lighting, and signal-processing systems. The device also provides 8 KB RAM, high-resolution PWM, a 12-bit ADC, and multiple serial interfaces according to the NXP product information. A digital signal controller is a microcontroller optimized for real-time signal acquisition, filtering, modulation, and control. Unlike a general-purpose microcontroller, the MC56F8027VLH integrates dedicated signal-processing peripherals with a deterministic embedded-control architecture. This makes it suitable for applications that must acquire analog signals, execute control calculations, and generate accurately timed outputs within one integrated device. The 56800E core provides 16-bit processing at up to 32 MHz, while 32 KB of flash supports firmware storage and 8 KB of RAM supports working data. The 12-bit ADC is useful for monitoring analog process variables, and the high-resolution PWM supports precision actuator, power-conversion, and lighting-control functions. Multiple serial interfaces enable connection to sensors, transceivers, memory, and industrial equipment. The 64-LQFP package provides a defined external pin arrangement and is suitable for conventional PCB assembly. Its larger lead pitch and exposed perimeter make it easier to inspect and manufacture than a fine-pitch package, although the device requires careful routing of power, ground, analog, and communication signals. The NRND lifecycle status indicates that the part should be selected carefully for new designs, while existing designs should verify availability and migration requirements before committing to production. Typical uses include industrial lighting controllers, motor and power conversion control, digital signal processing modules, instrumentation, and embedded systems requiring a combination of analog measurement and real-time computation. Firmware should account for the 12-bit ADC characteristics, PWM timing, serial peripheral configuration, and the package-specific pin multiplexing before hardware production. One key design consideration is to validate the complete signal path rather than selecting the controller only by clock rate. Analog input filtering, reference stability, PWM dead time or polarity, serial timing, and firmware interrupt latency determine system performance. Confirm the latest datasheet and NXP product-change notices before an NRND part is used in a new production program. This page consolidates verified manufacturer and distributor information, lifecycle status, package details, application guidance, and replacement analysis for engineers evaluating the MC56F8027VLH. Pricing and availability are referenced as of 2026-10-21 where distributor data provides them.

Cotação Contato