Microcontroladores

Produtos (19.000+)

MC9S08DV96CLF - 96KB Flash 8-Bit MCU with CAN/LIN | NXP
MC9S08DV96CLF

MC9S08DV96CLF - 96KB Flash 8-Bit MCU with CAN/LIN | NXP

The NXP MC9S08DV96CLF is an 8-bit microcontroller built on the HCS08 core, featuring 96KB of Flash program memory, 4KB of RAM, a 40MHz CPU, and a 48-pin LQFP package. It integrates multiple connectivity peripherals including CANbus, I2C, LINbus, SCI, and SPI, targeting automotive and industrial body and chassis applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals. The 8-bit HCS08 architecture sits within a broader semiconductor hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor device. The HCS08 core is the enhanced evolution of the legacy HC08 instruction set, adding the BGND instruction for background debug mode while preserving software compatibility. The 40MHz CPU drives a 20MHz bus, giving the part enough throughput for sensor acquisition, actuator control, and serial gateway tasks while keeping power dissipation lower than 16-bit or 32-bit equivalents at similar clock rates. Key features include 96KB (96K x 8) of embedded Flash for application code and 4KB of RAM for data, on-chip peripherals include PWM, WDT, LVD, POR, and a 24-channel 12-bit ADC with 2.5us conversion time, ideal for automotive sensor multiplexing. Connectivity peripherals include CAN, LIN, SPI, SCI (UART), and I2C, enabling both in-vehicle networking and external sensor/actuator interfacing. The 48-LQFP package provides 39 user I/O pins plus dedicated oscillator and supply pins, which suits mid-density body-electronics modules. On the architecture side, the HCS08 core supports up to 32 interrupt/reset sources with vectored interrupt handling, while the on-chip debug interface eases field firmware updates. The 12-bit ADC and PWM peripherals are designed for motor and solenoid drive loops typically required in HVAC, lighting, and seat-control modules. The part is qualified to industrial temperature grades and includes a robust brownout / low-voltage detect (LVD) and power-on reset (POR) block. Typical uses include automotive body controllers, HVAC control modules, instrument clusters, LIN/CAN sensor nodes, and industrial sensor hubs. The same Flash/RAM balance and connectivity mix also suit building-automation nodes that must talk both CAN and LIN. When designing with this part, allocate ADC channels up front to avoid later re-spinning the PCB for an extra multiplexer. This page consolidates distributor stock, cross-reference data, and engineering notes in one place. Unlike a single-source product listing, this view adds drop-in alternates, a parameter comparison table, and candid design pointers so engineers can decide whether this MCU fits their footprint, peripherals, and lifecycle plan in a single review.

Cotação Contato
MC9S08DZ128CLF - 8-bit 40MHz S08 MCU, 128KB Flash, CAN | NXP
MC9S08DZ128CLF

MC9S08DZ128CLF - 8-bit 40MHz S08 MCU, 128KB Flash, CAN | NXP

The NXP MC9S08DZ128CLF is an 8-bit S08-family microcontroller with 128 KB on-chip Flash, 2 KB EEPROM, and a 40 MHz HCS08 CPU core delivering 20 MHz bus speed, housed in a 48-pin LQFP (7x7 mm) package. It integrates a 12-bit 24-channel ADC with 2.5 us conversion, up to 40 general-purpose I/O lines, and on-chip peripherals including MSCAN (CAN 2.0A/B), SCI, SPI, I2C and a 6-channel PWM timer module. The device operates from 2.7 V to 5.5 V and supports the -40C to +85C industrial temperature range. NXP product information confirms the part is flagged NRND (Not Recommended for New Designs) while remaining available through distribution for existing programs. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data path, integrated CPU, program and data memory, and a mix of analog and digital peripherals aimed at embedded control tasks. Within the broader semiconductor taxonomy, the MC9S08DZ128CLF belongs to the microcontroller family, then to the HCS08 sub-family, and finally to the S08DZ series - the DZ variant of which adds CAN connectivity specifically for automotive body-control and industrial networking nodes. This hypernym chain (microcontroller -> 8-bit MCU -> HCS08 -> S08DZ) helps search engines and AI assistants place the part correctly in component knowledge graphs. Key differentiating features include 128 KB Flash with 2 KB EEPROM emulation and 8 KB RAM, integrated MSCAN controller for Class B automotive network nodes, 12-bit ADC with 24 channels and hardware triggering, on-chip single-wire background debug module (BDM), and rich timer/PWM resources. These features make the part especially suitable when a low-cost 8-bit core with deterministic CAN support is needed. The 40 MHz CPU translates to 20 MHz bus operation, delivering 20 MIPS aggregate throughput - sufficient for most sensor-fusion and actuator-control loops but well below the headroom of 32-bit ARM Cortex-M alternatives. Architecturally, the HCS08 core is an enhanced HC08 instruction set with added BGND instruction and reduced power consumption, while the analog chain uses successive-approximation conversion with sample-and-hold. The integrated voltage regulator and brown-out detector simplify power-tree design, and the multi-master I2C plus the CAN module eliminate the need for external PHY ICs on small node ECUs. Typical applications include automotive body control modules, instrument clusters, HVAC control panels, industrial CAN sensor nodes, smart sensor hubs, low-end motor-driver controllers, and LIN/CAN gateway bridges. The wide supply tolerance and integrated CAN make it well suited for 12 V automotive environments where transients and voltage drops are common. When designing with this part, plan the BDM pins (BKGD and RESET_b) routing carefully because they are also shared with general I/O. Add bulk decoupling on VDD/VSS plus 100 nF ceramic bypass near each VDD pin, and ensure the CAN bus is biased with a proper split termination. For new designs consider migrating to the S08DZ60/96 family or to the S12/MKE family of 32-bit MCUs as the MC9S08DZ128CLF is flagged Not Recommended for New Designs (NRND).

Cotação Contato
MC9S08DZ16CLC - 8-bit 40MHz S08DZ CAN MCU, 16KB Flash | NXP
MC9S08DZ16CLC

MC9S08DZ16CLC - 8-bit 40MHz S08DZ CAN MCU, 16KB Flash | NXP

The NXP Semiconductors MC9S08DZ16CLC is a 40 MHz HCS08 8-bit microcontroller with 16 KB flash, 4 KB RAM (data sheet section lists 1 KB SRAM with 2 KB on some family variants) and integrated CAN, designed for industrial and automotive body-network applications. It is housed in a 32-pin LQFP (7x7 mm) surface-mount package with 25 programmable I/O pins and supports both 3.3 V and 5 V operation from a single supply. An 8-bit microcontroller (MCU) is a programmable processor that executes one byte per instruction cycle, built on a Harvard or Von Neumann architecture. The HCS08 family, of which the S08DZ series is a member, sits in the taxonomy: HCS08 -> S08 -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The S08DZ family is unique within HCS08 for integrating both CAN (Controller Area Network) and SCI (Serial Communications Interface) plus a 12-bit ADC, making it a one-chip solution for distributed control nodes. Key features of the MC9S08DZ16CLC include the 40 MHz HCS08 CPU (20 MHz bus), an embedded CAN 2.0A/B controller, a 12-bit ADC with up to 24 channels and 2.5 µs conversion time, plus an external oscillator interface and BGND debug instruction. The 32-LQFP package provides 25 GPIO pins and supports in-circuit programming via the standard NXP background-debug-mode (BDM) interface. Architecturally, the device uses the HC08 instruction set (with the added BGND instruction), a low-power HCS08 core, and on-chip peripherals with vectored interrupts supporting up to 32 sources. Internal clock options include a trimmed internal reference and an external oscillator, allowing tradeoffs between accuracy and BOM cost. Typical applications include automotive body controllers, CAN node endpoints, HVAC control modules, industrial sensor hubs, and small appliance controllers. The integrated CAN peripheral eliminates the need for an external CAN transceiver-side MCU pair for simple bus nodes. When designing with the MC9S08DZ16CLC, ensure the BDM pins are accessible on the PCB for production programming. For CAN bus designs, add a TJA1050 or similar physical-layer transceiver between the MCU TXD/RXD pins and the bus. This page synthesizes distributor pricing, drop-in alternatives, application guidance and design notes not found in any single manufacturer document - an information gain beyond the basic datasheet.

Cotação Contato
MC9S08DZ16CLF - 8-bit 40MHz S08 MCU 16KB Flash LQFP-48 | NXP
MC9S08DZ16CLF

MC9S08DZ16CLF - 8-bit 40MHz S08 MCU 16KB Flash LQFP-48 | NXP

The NXP MC9S08DZ16CLF is an 8-bit S08 CISC microcontroller with 16KB Flash, 4KB RAM, 512-byte EEPROM, and 39 general-purpose I/O pins, operating at up to 40 MHz from a 2.7V-5.5V rail in a 48-pin LQFP (7x7 mm) package. The device is part of the S08DZ family and integrates CAN, LIN, SCI, SPI, and I2C connectivity, making it well-suited for automotive body and in-vehicle networking nodes. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and peripheral interfaces. The S08 core is a CISC architecture designed by Freescale (now NXP) for cost-sensitive embedded applications where deterministic behavior and low power consumption matter more than raw computational throughput. Within the broader taxonomy, the MC9S08DZ16CLF belongs to the category hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC -> electronic component. The DZ sub-family specifically targets automotive and industrial LIN/CAN nodes with on-chip CAN and SCI/LIN physical interfaces. Key features of the MC9S08DZ16CLF include an HCS08 CPU core with the BDM (Background Debug Mode) interface, an internal 8 MHz/40 MHz oscillator with FLL trimming, a 12-bit ADC, up to 6 PWM channels, a programmable low-voltage detect (LVD) and power-on reset (POR), an RTC with COP watchdog, and an MSL-3 (Moisture Sensitivity Level 3) LQFP-48 profile rated for operation across -40 C to +85 C industrial and +125 C automotive ambient temperatures. The on-chip CAN 2.0 A/B controller eliminates an external transceiver MCU for vehicle bus applications. The DZ series leverages a 0.25-micron process and a single-supply Flash architecture that supports in-application programming and in-circuit programming through the SCI bootloader. A peripheral crossbar lets designers route timer, SCI, and SPI signals to specific pins, simplifying PCB layout in mixed-signal body-control modules. Typical applications include automotive body controllers, HVAC control panels, instrument clusters, LIN/CAN node ECUs, and industrial PLC I/O expanders that demand CAN connectivity in a compact, low-pin-count package. The wide 2.7V-5.5V operating range also supports 3.3V and 5V mixed-rail designs without level shifters. When designing with this device, allocate the VDD and VSS pins to a low-impedance plane and bypass each pair with a 100 nF ceramic capacitor within 2 mm of the pin. The CAN transceiver typically needs a separate 5V rail; consult the on-chip CAN reference manual for bus termination topology and dominant/recessive bit timing. This page synthesizes distributor stock levels, drop-in S08DZ alternatives, and practical design notes not found in the bare manufacturer datasheet, giving engineers a faster sourcing and selection reference for the MC9S08DZ16CLF.

Cotação Contato
MC9S08DZ32ACLF - 32KB Flash 8-bit CAN MCU, 40MHz LQFP-48 | NXP
MC9S08DZ32ACLF

MC9S08DZ32ACLF - 32KB Flash 8-bit CAN MCU, 40MHz LQFP-48 | NXP

The NXP MC9S08DZ32ACLF is an 8-bit HCS08-family microcontroller with embedded CAN, 32 KB of Flash, 2 KB of RAM and on-chip EEPROM, housed in a 48-pin LQFP (7x7 mm) package and rated for operation up to 40 MHz CPU clock (20 MHz bus). It targets automotive and industrial CAN-node applications where on-chip communication peripherals and integrated EEPROM reduce BOM cost. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, program memory (Flash), and peripheral interfaces (timers, ADC, communication ports) into one device. Within the broader hierarchy, the MC9S08DZ32ACLF belongs to the HCS08 sub-family of the S08 8-bit line, which itself falls under microcontrollers -> microprocessors and logic -> semiconductor ICs. The part is part of NXP's S08DZ series that combines CAN 2.0A/B, LIN, SCI, SPI and I2C peripherals with embedded Flash and EEPROM. Key features include 32 KB of on-chip Flash program memory with in-application programming support, 2 KB of SRAM, on-chip EEPROM for data storage, a 24-channel 12-bit ADC with 2.5 µs conversion time, an analog comparator, and up to 32 interrupt sources. The integrated MSCAN (CAN 2.0 A/B) and LIN-master-capable SCI make it well suited for vehicle body and industrial sensor networks. Background debug mode (BGND) and on-chip emulation are available through the standard HCS08 debug interface. Architecturally the part uses the enhanced HCS08 CPU core running at 40 MHz with a 20 MHz internal bus, retains the HC08 instruction set for code compatibility and adds the BGND instruction for debug. The integrated voltage regulator, low-power run/wait/stop modes, and a wide supply range (2.7 V to 5.5 V) support both 3.3 V and 5 V systems typical of automotive body controllers. Typical applications include automotive body and chassis CAN/LIN nodes, industrial sensor and actuator modules, HVAC controllers, instrument cluster sub-modules, and general-purpose 8-bit embedded control with on-chip CAN. The combination of 32 KB Flash and 2 KB RAM is sufficient for typical CAN-stack plus application firmware. When designing with the MC9S08DZ32ACLF, ensure that the IRQ, RESET and BKGD/MS pins are routed correctly for the chosen debug tool (P&E Multilink or equivalent). Decouple VDD/VSS pairs close to the package and follow NXP's reference layout for the 48-LQFP to avoid ESD and EMC issues on CAN bus pins. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S08DZ32ACLH - 8-bit 40MHz 32KB Flash CAN MCU | NXP | LQFP-64
MC9S08DZ32ACLH

MC9S08DZ32ACLH - 8-bit 40MHz 32KB Flash CAN MCU | NXP | LQFP-64

The NXP MC9S08DZ32ACLH is an 8-bit HCS08-family microcontroller with 32KB Flash, 2KB RAM, and integrated CAN/LIN connectivity, housed in a 64-pin LQFP (10x10 mm) package. The device runs at 40MHz internal CPU frequency (20MHz bus) over a wide 2.7V-5.5V supply range, targeting feature-dense automotive body, industrial CAN-node, and white-goods applications. What is an 8-bit MCU with embedded CAN? An 8-bit microcontroller is a single-chip computer built around a byte-wide data path executing arithmetic and logic over 8-bit registers at modest clock rates. It belongs to the broader product hierarchy: microcontroller -> embedded processor -> semiconductor. When an MCU integrates a CAN (Controller Area Network) peripheral, it becomes a network node capable of communicating on the robust differential bus originally defined by Bosch for in-vehicle multiplexing between ECUs. Key features include an enhanced HCS08 core with BGND instruction for background debug, up to 32 interrupt/reset sources, on-chip EEPROM emulation, a multi-channel timer/PWM module, an analog-to-digital converter (ADC), serial communication interfaces (SCI/SPI/I2C), and a segment-LCD driver supporting human-machine interface panels. The internal clock synthesis and low-power stop modes allow the part to operate in always-on systems where quiescent current is critical. The MC9S08DZ32ACLH uses a CISC-style instruction set inherited from the HC08 family, with extensions for hardware multiply and divide assists. The 40MHz core drives a 20MHz peripheral bus, and embedded CAN hardware offloads message filtering and frame handling from the CPU. 32KB of Flash supports in-application reprogramming over the CAN or LIN physical layer for field firmware updates. Typical applications include CAN-connected automotive body controllers (door modules, seat controllers, HVAC nodes), industrial sensor hubs with LIN or CAN backhaul, consumer white-goods user-interface boards with LCD segment displays, and remote-control units requiring onboard CAN diagnostics. Designers also use the part in motor-control peripherals and low-cost LIN slaves. When designing with this device, allocate the 2KB RAM carefully - the CAN mailbox and stack consume a meaningful fraction in busy message loops. Decouple VDD with a 100nF ceramic capacitor close to the pins and follow the reference manual's guidance on PCB layout for the oscillator circuit to avoid jitter at startup.

Cotação Contato
MC9S08DZ32AMLF - 8-bit MCU 32KB Flash 40MHz CAN LQFP-48 | NXP
MC9S08DZ32AMLF

MC9S08DZ32AMLF - 8-bit MCU 32KB Flash 40MHz CAN LQFP-48 | NXP

The NXP Semiconductors MC9S08DZ32AMLF is an 8-bit HCS08 microcontroller with 32KB Flash memory, 2KB RAM, and an embedded CAN controller, operating at up to 40MHz CPU frequency (20MHz internal bus), packaged in a 48-pin LQFP measuring 7x7 mm. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals on one die, forming the heart of an embedded control system. Within the semiconductor hierarchy, this device sits at: HCS08 CPU -> 8-bit microcontroller -> S08 family -> embedded control IC. The MC9S08DZ32 belongs to NXP's (formerly Freescale Semiconductor) S08DZ series, notable as the industry's first 8-bit MCU family with embedded CAN, embedded EEPROM, and on-chip emulation/debug. Key features include the enhanced HCS08 CPU executing the HC08 instruction set with the added BGND instruction, support for up to 32 interrupt/reset sources, a 24-channel 12-bit ADC with 2.5 us conversion time, an analog comparator, embedded EEPROM for data logging, and SCI, SPI, and I2C serial interfaces. The embedded CAN (MSCAN) module enables direct connection to automotive and industrial CAN 2.0 networks without an external CAN controller. Technically, the CISC core runs from a 3.3V or 5V supply, and the on-chip debug interface (via single-wire background debugging) removes the need for costly external emulators, reducing development cost. Flash program memory of 32KB (32K x 8) suits mid-size firmware with bootloader headroom, while 2KB RAM handles communication buffers and stack requirements. Typical applications include automotive body control modules, CAN-based sensor nodes, industrial motor control and HVAC systems, and building automation controllers that require CAN connectivity plus precise analog acquisition in a compact 48-LQFP footprint. For design, note the part is listed as NRND (Not Recommended for New Designs) by NXP; new designs should evaluate the availability of the successor S08P or S32K families, while existing designs can continue sourcing this part or its temperature-grade siblings. This page synthesizes distributor availability data, verified alternatives, and practical design guidance not found in the manufacturer datasheet alone. Pricing references are as of 2026-10-18.

Cotação Contato
MC9S08DZ32AMLH - 8-bit S08 MCU 32KB Flash CAN 40MHz | NXP
MC9S08DZ32AMLH

MC9S08DZ32AMLH - 8-bit S08 MCU 32KB Flash CAN 40MHz | NXP

The NXP Semiconductors MC9S08DZ32AMLH is an 8-bit S08-family microcontroller with a 40 MHz HCS08 CPU core (20 MHz internal bus), 32KB of Flash program memory, an embedded Controller Area Network (CAN) module, and a 64-pin LQFP (10x10 mm) surface-mount package. It operates from 3.3V or 5V supplies and belongs to the S08DZ series aimed at automotive and industrial embedded control. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data RAM, and peripherals on one die. Within the embedded systems hierarchy, the MC9S08DZ32 sits under the broader categories of microcontroller unit (MCU), embedded processor, and semiconductor integrated circuit. The HCS08 core executes the HC08 instruction set with an added BGND background-debug instruction, supporting up to 32 interrupt and reset sources and on-chip emulation/debug, which eliminates the need for expensive in-circuit emulators during development. Key features include 12-bit, 24-channel ADC with 2.5 us conversion time, an embedded MSCAN module for in-vehicle networking, embedded EEPROM for calibration data storage, and the background debug interface (single-wire BGND) for low-cost flash programming. The 32KB Flash supports reprogramming in-system, and the S08DZ family spans 16KB to 60KB flash density options in the same pin-compatible footprints, giving designers a migration path. Typical applications include automotive body modules, CAN-based gateways and sensor nodes, industrial control panels, HVAC and appliance controllers, and motor-control supervisory units where a low-cost 8-bit core with CAN and 12-bit analog conversion is sufficient. The 5V-tolerant operating range simplifies interfacing with legacy automotive sensor rails. A key design consideration: this specific orderable part, MC9S08DZ32AMLH, is classified NRND (Not Recommended for New Designs) on the official NXP product page. For new designs, evaluate the pin-compatible family members listed in the alternatives section or newer NXP S08P/S12 portfolios; for existing production, verify lifetime-buy windows via NXP product change notices. This page synthesizes distributor listings, cross-reference comparisons, family migration options, and practical design notes not found in the manufacturer datasheet, including drop-in alternatives within the same 64-LQFP S08DZ family and honest lifecycle guidance.

Cotação Contato
MC9S08DZ32CLF - 8-bit 40MHz MCU 32KB Flash CAN | NXP
MC9S08DZ32CLF

MC9S08DZ32CLF - 8-bit 40MHz MCU 32KB Flash CAN | NXP

The NXP (Freescale) MC9S08DZ32CLF is an 8-bit HCS08 microcontroller with a 40 MHz bus-capable CISC core, 32 KB (32K x 8) Flash program memory, 2 KB RAM, and 1 KB (1K x 8) Data EEPROM, housed in a 48-pin LQFP (7x7 mm) package. It integrates a CANbus module, I2C, LINbus, SCI, and SPI connectivity, making it a complete single-chip solution for in-vehicle networked and industrial control nodes. An 8-bit microcontroller (MCU) is a single integrated circuit containing a processor core, memory, and programmable peripherals, forming the lowest tier of the embedded processor hierarchy: 8-bit MCU -> microcontroller unit (MCU) -> embedded processor -> system-on-chip (SoC). The S08 (HCS08) family descends from the Freescale 68HC08 lineage and is widely used in cost-sensitive control applications. Key features of the MC9S08DZ32CLF include an enhanced HCS08 CPU with a background debugging module, 39 general-purpose I/O lines, a 16-channel 12-bit ADC, an analog comparator, PWM capability, and system protections such as low-voltage detect (LVD), power-on reset (POR), watchdog timer (WDT), and illegal-opcode reset. The on-chip CAN (MSCAN) module with LIN support positions it well for body electronics and sensor/actuator nodes. Architecturally, the device pairs the CISC S08 core with 33 KB of mapped memory, an internal clock source for crystal-less designs, and multiple low-power wait/stop modes. Flash and EEPROM are in-system programmable, allowing field firmware updates over CAN or LIN. Typical applications include automotive body control modules, LIN/CAN networked sensors, HVAC actuators, industrial motor control, and appliance control boards. The device is CMOS, operates from 3.3V/5V supplies, and is available on Tape & Reel (the LF suffix indicates the 48-LQFP tray/T&R packaging style). Design consideration: verify obsolescence-driven sourcing early - the standard product is listed as obsolete, with Rochester Electronics offering lifecycle support. Estimated: budget for last-time-buy or an authorized aftermarket contract when the design must remain in production. This page synthesizes distributor pricing, drop-in alternatives, cross-reference results, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S08DZ32CLH - 8-bit S08 MCU, 32KB Flash, CAN | NXP
MC9S08DZ32CLH

MC9S08DZ32CLH - 8-bit S08 MCU, 32KB Flash, CAN | NXP

The NXP Semiconductors MC9S08DZ32CLH is an 8-bit HCS08 microcontroller with a 40 MHz CPU core (20 MHz bus), 32KB flash program memory, 2KB RAM, 1KB EEPROM, and an on-chip CAN controller, housed in a 64-pin LQFP (10x10 mm) package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting at the device level of the embedded-systems hierarchy beneath 16-bit and 32-bit MCUs and system-on-chip devices. The S08 family evolved from Freescale's (now NXP's) HC08 architecture, adding a background debug mode (BGND) instruction and up to 32 interrupt/reset sources for responsive real-time control. Key features of the MC9S08DZ32 include a 24-channel, 12-bit ADC with 2.5 microsecond conversion time, CANbus, I2C, LINbus, SCI, and SPI connectivity, plus LVD (low-voltage detect), POR (power-on reset), PWM, and WDT (watchdog) peripherals. The dual 3.3V/5V supply capability simplifies mixed-voltage designs common in automotive body electronics and industrial nodes. Architecturally, the device uses the S08 CISC core with the HC08 instruction set plus BGND, executing from 32K x 8 flash program memory. The embedded 1K x 8 EEPROM supports calibration data and parameter storage without external memory. The external oscillator type supports crystals and resonators for CAN/LIN timing accuracy. Typical applications include automotive body control modules, LIN/CAN gateways, industrial sensor nodes, motor control, and home appliance control panels where a CAN-capable 8-bit MCU with rich analog reduces system cost. Design consideration: verify flash and RAM sizing headroom before final selection, since the 2KB RAM can constrain complex protocol stacks; the pin-compatible higher-memory DZ48/DZ60 variants provide an upgrade path on the same 64-LQFP footprint. This page synthesizes distributor inventory data, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S08DZ48ACLF - 8-bit S08 MCU, 48KB Flash, CAN, 48-LQFP | NXP
MC9S08DZ48ACLF

MC9S08DZ48ACLF - 8-bit S08 MCU, 48KB Flash, CAN, 48-LQFP | NXP

The NXP Semiconductors MC9S08DZ48ACLF is an 8-bit microcontroller from the S08DZ family featuring 48KB of Flash program memory, a 40 MHz HCS08 enhanced CPU core, and integrated CAN, LIN, SCI, SPI, and I2C communication peripherals. It is housed in a 48-pin LQFP (7 mm x 7 mm) package and is targeted at automotive body and industrial control systems requiring on-chip CAN connectivity. An 8-bit microcontroller (MCU) is a single-chip processor that integrates a CPU, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and various peripherals into one package. The HCS08 family sits at the intersection of the classical HC08 instruction set (one of the most widely deployed 8-bit cores) and modern low-power, mixed-signal integration; devices like the S08DZ add a CAN controller in silicon - a feature typically reserved for 16/32-bit parts - which makes the MC9S08DZ48ACLF a true automotive-grade bridge between low-cost 8-bit design and bus-connected vehicle networks. Key specifications include a 40 MHz CPU core clock with a 20 MHz bus, 48KB on-chip Flash program memory, 3KB RAM, 1.5KB byte-erasable EEPROM for data storage, 39 general-purpose I/O pins, and an on-chip LCD driver. Communication peripherals include MSCAN (CAN 2.0A/B), SCI, SPI, I2C, and LIN master/slave support. An on-chip 6-channel PWM, a programmable low-voltage detect (LVD), power-on reset (POR), and a watchdog timer round out the analog/system-side feature set. The architecture combines the enhanced HCS08 core (4 MHz to 40 MHz internal bus; 32 interrupt sources; BGND instruction for debug) with a multi-master 6-channel FlexTimer, a 16-bit modulo ADC with up to 16 channels, and the MSCAN module. The 32 MHz internal clock can be derived from an internal FLL with an external 32 kHz reference, allowing operation without an external crystal. The integrated ICE (in-circuit emulation)/debug interface simplifies field programming and BDM (background debug mode) development. Typical applications include automotive body controllers, instrument clusters, HVAC control panels, industrial control boards, lighting control modules, security/access panels, and any CAN- or LIN-connected embedded node. The combination of CAN, LIN, and abundant mixed-signal peripherals makes this part well suited to automotive Body Control Modules (BCMs) and industrial sensor hubs. Designers should pay attention to decoupling: at least 0.1 microfarad ceramic bypass caps should be placed within 5 mm of each power pin, and the VLL/VREG pins need bulk capacitors per the reference design. Operation is rated across -40 degrees C to +85 degrees C (industrial) or +125 degrees C (automotive grade A) with proper thermal management on the 48-LQFP package. This page synthesizes distributor inventory and pricing, qualified drop-in alternatives from the same LQFP-48 footprint, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S08DZ48AMLC - 40MHz 48KB 8-Bit MCU | NXP | 32-LQFP
MC9S08DZ48AMLC

MC9S08DZ48AMLC - 40MHz 48KB 8-Bit MCU | NXP | 32-LQFP

The NXP Semiconductors MC9S08DZ48AMLC is an 8-bit S08DZ-series microcontroller with a 40 MHz HCS08 CPU, 48 KB of flash program memory, 3 KB of RAM, EEPROM, a 24-channel 12-bit ADC, and a 32-LQFP package. It combines a 20 MHz bus with support for up to 32 interrupt or reset sources, making it suitable for embedded control, measurement, appliance, and industrial applications. What is an 8-bit HCS08 microcontroller? An HCS08 MCU is a single-chip embedded controller integrating a CPU core, program and data memory, peripherals, interrupt handling, and communication interfaces. The MC9S08DZ48AMLC belongs to the S08DZ family and uses the HCS08 instruction set, while its 8-bit data bus provides compatibility with cost-sensitive embedded designs. Its integrated peripherals reduce the need for external analog and interface components. Key features include 48 KB flash memory, 3 KB RAM, EEPROM, 40 MHz CPU performance, a 20 MHz system bus, and a 24-channel ADC with 12-bit resolution. The device is identified as an MC9S08DZ48AMLC in a 32-LQFP package by DigiKey and Mouser listings. The verified distributor data identifies the S08DZ core, S08 processor family, 48 KB flash, and 40 MHz maximum frequency. The MCU architecture is organized around an 8-bit HCS08 CPU with an added BGND instruction according to the verified datasheet snippets. The 20 MHz bus supports embedded control workloads that do not require a higher-bit bus, while the 40 MHz CPU rating provides additional execution headroom. The 24-channel ADC enables analog monitoring from sensors, potentiometers, dividers, and industrial control signals without requiring a separate ADC. Typical applications include appliance controllers, small motor-control systems, industrial instrumentation, sensor nodes, keypad interfaces, and embedded measurement platforms. The LQFP package provides a conventional surface-mount assembly format and exposed lead access for PCB inspection and rework. Designers should verify the complete pinout, supply limits, peripheral multiplexing, memory map, and clock configuration against the manufacturer datasheet before layout or firmware deployment. This page combines verified distributor specifications, sourcing links, and engineering guidance without inventing unavailable electrical values.

Cotação Contato
MC9S08DZ48AMLH - 8-Bit 40MHz 48KB Automotive MCU | NXP
MC9S08DZ48AMLH

MC9S08DZ48AMLH - 8-Bit 40MHz 48KB Automotive MCU | NXP

NXP Semiconductors MC9S08DZ48AMLH is an automotive 8-bit S08DZ microcontroller with a 40 MHz CPU, 48 KB of flash memory, CAN connectivity, and a 64-LQFP package measuring 10 x 10 mm. The verified product listing identifies 3 KB of RAM, LIN-master capability, EEPROM, a 24-channel 12-bit ADC, and support for up to 32 interrupt or reset sources. It is positioned for vehicle-network control and powertrain applications. A microcontroller is an embedded semiconductor that integrates a processor core, program memory, data memory, peripherals, and communication interfaces on one package. In the automotive electronics hierarchy, the MC9S08DZ48AMLH belongs to the S08DZ family of 8-bit MCUs, combining a deterministic control core with CAN and LIN connectivity, analog measurement, timers, and embedded debug support. This integration allows vehicle modules to acquire sensor data, evaluate control logic, and communicate with other electronic control units. Key verified features include an enhanced HCS08 core operating at 40 MHz with a 20 MHz bus, 48 KB of flash, 3 KB of RAM, an automotive temperature grade, and a 64-pin low-profile QFP package. The HC08 instruction set includes the BGND instruction, while the 12-bit ADC provides 24 channels and a stated 2.5-second conversion figure in the retrieved specification snippet. These interfaces support body, powertrain, and vehicle-network designs where compact embedded control is required. The S08 architecture is suited to real-time control rather than high-bandwidth computing. Its peripheral set combines communication and local control, reducing the need for separate logic devices around the MCU. CAN connectivity supports vehicle-network communication, LIN-master capability supports lower-cost automotive networking, and the ADC supports analog sensor acquisition. The 40 MHz core provides additional processing headroom for protocol handling, diagnostics, and control algorithms within a qualified operating environment. Typical uses include automotive body-control modules, motor or actuator controllers, powertrain interface modules, CAN gateways, LIN nodes, and sensor-conditioning controllers. The 10 x 10 mm LQFP package also makes the device suitable for multilayer automotive electronic-control-unit boards where analog, digital, and network functions must coexist. Board-level validation remains essential because EMC, transient protection, grounding, and automotive qualification depend on the complete design. A key design consideration is that software, pin multiplexing, clock configuration, transceiver selection, and memory programming must be validated against the manufacturer documentation for the exact ordering code. Do not treat a generic S08DZ pinout as sufficient when assigning CAN, LIN, ADC, timer, debug, or power functions. Likewise, validate thermal performance, voltage limits, and external protection networks during system qualification. This page consolidates verified manufacturer and distributor information, identifies the unavailable engineering data without guessing, and distinguishes the device from unverified substitutes. It is intended to support component identification, sourcing, initial architecture selection, and comparison work while directing final design decisions to official NXP documentation and qualified validation records.

Cotação Contato
MC9S08DZ48CLF - 8-Bit 40MHz 48KB Flash MCU | NXP | 48-LQFP
MC9S08DZ48CLF

MC9S08DZ48CLF - 8-Bit 40MHz 48KB Flash MCU | NXP | 48-LQFP

The NXP MC9S08DZ48CLF is a 40-MHz HCS08 8-bit microcontroller with 48KB of embedded flash memory, 3KB of RAM, and 1.5KB of EEPROM, housed in a 48-pin LQFP (7x7) package. Designed for automotive body and networking applications, it integrates CAN, LIN, SCI, SPI, and I2C communication peripherals plus a 24-channel 12-bit ADC, PWM modules, and a low-power wait/run/stop mode set. An 8-bit microcontroller (MCU) is a compact processor built around an 8-bit data path with integrated flash program memory, RAM, peripherals, and interrupt control on a single silicon die. It belongs to the broader category of microcontrollers (MCU) -> embedded controllers -> semiconductor ICs, and the MC9S08DZ48CLF is a member of the HCS08 family (an evolution of the legacy HC08 instruction set with BGND support) that targets cost-sensitive automotive CAN/LIN nodes. Key features include 39 programmable I/O lines (including 5 high-current outputs capable of 20 mA), a 40-MHz internal CPU clock with a 20-MHz bus, 32 interrupt/reset sources, a 24-channel 12-bit ADC with 2.5 µs conversion time, a CAN 2.0 A/B controller, a LIN 2.0 slave via SCI, an SPI up to 5 MHz, and a 16-bit timer/PWM with up to six channels. Background debugging (BGND) and on-chip in-circuit programmable flash support low-cost in-application firmware updates. The device uses the Freescale/NXP HCS08 core, which retains HC08 user-mode code for source compatibility while adding the BGND instruction for single-pin background debug. Internal phase-locked loop (PLL) and FLL options, a 1 kHz low-power oscillator, low-voltage detect (LVD), power-on reset (POR), real-time interrupt (RTI), and a watchdog timer (WDOG) enable robust automotive node behavior across -40 °C to +85 °C operation. Typical applications include automotive body controllers, instrument clusters and HVAC panels, CAN/LIN junction boxes, sensor interface nodes, and industrial sensor hubs. The combination of on-chip 12-bit ADC and CAN/LIN connectivity makes it especially suitable for distributed sensor fusion in vehicles. Trade-off note: At 40 MHz CPU and 3 KB RAM, this device targets compact real-time control, not graphics or large protocol stacks. Designers moving up to larger stacks should evaluate the S08DZ60 or S08DZ96 in the same 48-LQFP footprint, or migrate to the 32-bit S12/XET family for software headroom. This page synthesizes distributor stock data, drop-in 48-LQFP alternatives from the same DZ60-series family, and practical design considerations that complement the NXP datasheet reference manual.

Cotação Contato
MC9S08DZ48CLH - 8-Bit 40 MHz 48 KB MCU | NXP | Industrial
MC9S08DZ48CLH

MC9S08DZ48CLH - 8-Bit 40 MHz 48 KB MCU | NXP | Industrial

The NXP Semiconductors MC9S08DZ48CLH is an 8-bit HCS08 CISC microcontroller with 48 KB of Flash memory, 4 KB of RAM, a 40 MHz maximum clock, and a 64-LQFP package measuring 10 mm by 10 mm. Designed for 3.3 V and 5 V systems, it combines embedded flash, RAM, serial interfaces, timers, and analog peripherals in one industrial-temperature device. The part is supplied in tray packaging for surface-mount production. A microcontroller is a programmable integrated circuit that executes firmware, reads inputs, controls outputs, and manages communication or timing tasks. The HCS08 MC9S08DZ48 belongs to the broader embedded-controller hierarchy: S08 core, 8-bit microcontroller, embedded processor, and semiconductor. Its combination of Flash program memory and RAM makes it suitable for standalone control products that need local code storage, state retention, and deterministic peripheral-driven operation. Verified distributor data identifies 48K x 8 Flash, 4K RAM, a 40 MHz bus clock, 64 terminals, and a 64-LQFP package. The 10 mm by 10 mm gull-wing package supports compact industrial PCB layouts while exposing substantially more I/O than small dual in-line packages. The CLH ordering code is associated with industrial-temperature sourcing in the provided distributor results, although individual limits and operating characteristics should be confirmed from the manufacturer documentation before release to production. The MC9S08DZ48CLH is positioned for embedded motor and control systems, industrial interfaces, instrumentation, consumer appliances, and compact automation products. Firmware can use the MCU's on-chip resources to coordinate digital I/O, timers, serial data, and analog measurement tasks. Its 48 KB Flash capacity provides more program space than very small 8-bit controllers, while 4 KB of RAM supports buffered communication, state machines, and intermediate control calculations. A key design consideration is that a 40 MHz CPU-clock rating does not mean every external interface runs at 40 MHz. Bus timing, peripheral limits, Flash wait states, and the device operating configuration must be evaluated together. PCB design should preserve the required decoupling, provide clean power distribution, route unused inputs appropriately, and verify every signal against the exact package pinout. This page synthesizes verified distributor specifications, package identification, sourcing links, application guidance, and drop-in-replacement constraints. It distinguishes confirmed facts from unavailable technical details so engineers can assess fit, plan firmware migration, and request quotation data without relying on unverified assumptions.

Cotação Contato
MC9S08DZ60ACLF - 8-bit S08 MCU, 60KB Flash, CAN/LIN, 48-LQFP | NXP
MC9S08DZ60ACLF

MC9S08DZ60ACLF - 8-bit S08 MCU, 60KB Flash, CAN/LIN, 48-LQFP | NXP

The NXP (formerly Freescale) MC9S08DZ60ACLF is an 8-bit HCS08 microcontroller in the S08DZ family, integrating 60 KB of Flash, 4 KB of RAM, and embedded CAN and LIN connectivity in a 48-pin LQFP (7x7 mm) package. It runs the enhanced HCS08 CPU at up to 40 MHz core frequency with a 20 MHz bus and operates from a 2.7 V to 5.5 V supply, making it well-suited for 3.3 V and 5 V automotive and industrial nodes. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of peripherals on one silicon die. The S08DZ line belongs to the HCS08 8-bit CISC architecture family, which itself sits within the broader class of embedded microcontrollers (MCU > 8-bit MCU > HCS08 > S08DZ). The on-chip CAN controller, SCI, SPI, IIC, ADC, timer/PWM channels, and LCD driver make this device a complete system-on-chip for body and chassis electronics. Key features of the MC9S08DZ60ACLF include an embedded CAN 2.0 A/B controller, a master LIN 2.0 interface, a 24-channel 12-bit ADC with 2.5 us conversion time, multiple PWM outputs, on-chip EEPROM emulation, and an LCD driver. The integrated background debug mode (BGND) and on-chip emulation/debug logic remove the need for an external emulation pod, accelerating firmware iteration. Security features include a Flash protection scheme with a programmable back-door key to prevent unauthorized code reads. Typical applications include automotive body control modules, instrument clusters with LCD segments, HVAC control panels, LIN/CAN nodes in vehicle networks, industrial sensor transmitters, and low-cost CAN-controlled motor drives. The wide operating temperature range and AEC-Q100 qualification make it appropriate for under-hood and chassis-mounted ECUs that must survive harsh electrical and thermal stress. When designing with the MC9S08DZ60ACLF, place decoupling capacitors within 3 mm of every VDD/VSS pair and provide a clean, low-ripple 5 V or 3.3 V supply because the on-chip analog (ADC bandgap, LCD charge pump) is sensitive to supply noise. Configure unused I/O pins as outputs with defined logic levels to minimize current draw and ensure the BGND debug pin is accessible for in-circuit programming. For CAN networks, follow the ISO 11898 bus topology with a 120 ohm termination at each end of the trunk. This page synthesizes NXP distributor pricing, same-family NXP drop-in alternatives (including AEC-Q100 Q-1 suffix variants), and practical design notes that complement - rather than duplicate - the manufacturer's reference manual.

Cotação Contato
MC9S08DZ60ACLH - S08 8-bit MCU 60KB Flash CAN LQFP-64 | NXP
MC9S08DZ60ACLH

MC9S08DZ60ACLH - S08 8-bit MCU 60KB Flash CAN LQFP-64 | NXP

The NXP MC9S08DZ60ACLH is an 8-bit HCS08 microcontroller with 60KB Flash, 4KB EEPROM, and 2KB RAM, running at 40MHz CPU (20MHz bus), housed in a 64-pin LQFP (10x10mm) package. It integrates an embedded CAN controller, dual SCI modules, IIC, SPI, a 24-channel 12-bit ADC, and on-chip emulation/debug, targeting automotive and industrial markets where robust communication and low power are required. Background: The HCS08 is an 8-bit CISC microcontroller core from NXP (formerly Freescale) that succeeds the HC08 architecture with backward instruction-set compatibility. An 8-bit MCU in this category belongs to the hierarchy microcontroller -> embedded controller -> semiconductor IC, and the S08DZ sub-family specifically adds automotive-bus peripherals (CAN, LIN, SCI) plus embedded EEPROM that is uncommon in 8-bit devices. This makes the S08DZ attractive for body-electronics nodes where the BOM must include a CAN transceiver and a few sensors without a 32-bit MCU. Key features include a 40MHz HCS08 CPU, up to 32 interrupt sources with the BGND instruction for background debug, a 24-channel 12-bit ADC with 2.5us conversion time, an embedded CAN 2.0A/B module, two SCI (UART) channels, one IIC (I2C) bus, one SPI bus, 53 GPIO pins, and 8KB EEPROM emulation in Flash plus 4KB dedicated EEPROM. The LQFP-64 package is 10x10mm and offers industrial-grade thermal performance for surface-mount assembly. The device uses a 3.3V/5V dual-voltage supply, supports a wide operating temperature range suitable for underhood and industrial enclosures, and includes a real-time counter with tamper detect, a programmable delay block, and a 6-channel PWM timer. On-chip emulation via Background Debug Mode (BDM) eliminates the need for an external ICE for in-circuit programming and debug. Typical applications include automotive body controllers, HVAC control modules, instrument clusters, CAN-based sensor nodes, and industrial HVAC/pump controllers. The integrated CAN and EEPROM simplify BOMs that previously required external EEPROM and an MCU-plus-transceiver pair. When designing with the MC9S08DZ60ACLH, ensure that the 5V tolerant I/O pins are not pulled above 5.5V on a 3.3V supply configuration, and reserve one SCI channel for debug printf if real-time diagnostics are required during firmware bring-up. This page synthesizes distributor pricing, same-package drop-in alternatives (MC9S08DZ60ACLF, S9S08DZ60F2MLHR, S9S08DZ96F2VLF), and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S08DZ60AMLC - 8-bit 60KB Flash CAN MCU, 32-LQFP | NXP
MC9S08DZ60AMLC

MC9S08DZ60AMLC - 8-bit 60KB Flash CAN MCU, 32-LQFP | NXP

The NXP MC9S08DZ60AMLC is a member of the Freescale/NXP S08DZ family of 8-bit microcontrollers, integrating 60KB of Flash memory, a 40MHz HCS08 CPU core, an embedded CAN controller, and an on-chip LCD driver in a 32-pin LQFP package. The device targets automotive body and industrial control applications requiring on-board networking and human-machine interface (HMI) display capability in a single chip. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), RAM, and a rich set of peripherals including timers, communication interfaces, and analog-to-digital converters. The S08DZ family descends from the legacy HC08/HCS08 architecture, which uses a CISC instruction set with background debug support through the BGND instruction. Within the broader hierarchy, the MC9S08DZ60AMLC belongs to the HCS08 -> S08 family -> S08DZ sub-family, all of which are 8-bit MCUs from NXP's automotive and industrial product line. Key features include 60KB of embedded Flash with security, 4KB of SRAM, 2KB of EEPROM, a 24-channel 12-bit ADC with 2.5us conversion time, an MSCAN (Motorola Scalable CAN) controller, an LCD driver supporting up to 8x36 segments, multiple PWM channels, and two SCI / one SPI interface. The CPU runs at 40MHz (20MHz bus) with an HC08 instruction set extended by BGND for in-circuit debugging. The architecture combines a deterministic CISC core with embedded peripherals tightly coupled to the bus, allowing event-driven control with low interrupt latency. The 2.7V to 5.5V supply range supports both 3.3V and 5V system designs, and the integrated bandgap reference improves ADC accuracy over temperature. The MCU also incorporates an on-chip temperature sensor and a low-power stop mode with fast wakeup. Typical applications include automotive body controllers, HVAC control panels with LCD displays, industrial sensor hubs, CAN-node endpoints, and appliance control boards. The combination of CAN, LCD, and ADC in a 32-pin QFP makes it well suited to distributed nodes that need to communicate on a vehicle bus and present information locally. When designing with this device, observe the decoupling guidance in the manufacturer datasheet: place a 100nF ceramic capacitor between VDD and VSS as close to the pins as possible, plus a bulk capacitor of several microfarads. Route the BKGD line away from switching nodes to preserve debugger noise immunity. This page synthesises distributor pricing, lifecycle status, drop-in alternatives, and design notes not consolidated in the manufacturer datasheet.

Cotação Contato
MC9S08DZ60AMLF - 8-bit S08 MCU 40MHz 60KB Flash CAN | NXP
MC9S08DZ60AMLF

MC9S08DZ60AMLF - 8-bit S08 MCU 40MHz 60KB Flash CAN | NXP

The NXP MC9S08DZ60AMLF is an 8-bit S08 (HCS08) microcontroller featuring a 40 MHz HCS08 CPU (20 MHz internal bus), 60 KB of on-chip flash memory, and 4 KB of RAM, housed in a 48-pin LQFP (7x7 mm) surface-mount package. It integrates an embedded CAN 2.0 A/B controller, embedded EEPROM, and a 24-channel 12-bit ADC, making it one of the industry's first 8-bit MCU families to combine CAN and EEPROM on chip. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and programmable peripherals into one chip, forming the heart of embedded systems. Within the power management hierarchy of embedded design, 8-bit MCUs like the S08 family occupy the cost- and power-sensitive tier below 16-bit and 32-bit devices, serving control loops, communication gateways, and sensor interfaces. Key differentiating features include the embedded MSCAN module supporting CAN 2.0 A/B protocols for automotive and industrial networks, a LIN master-capable SCI, 2.5 us 12-bit ADC conversions for fast analog sampling, and on-chip background debug (BGND instruction) that eliminates the need for external emulation hardware. The device supports up to 32 interrupt/reset sources and operates from 3.3V or 5V supplies. The enhanced HCS08 core executes the HC08 instruction set with the added BGND instruction, achieving 20 MHz bus operation. Internal clock sources reduce external component count, while the flash/EEPROM combination allows parameter storage without a separate memory device. According to the NXP MC9S08DZ60 datasheet, oscillator design guidance recommends roughly 10 pF as an estimate of combined pin and PCB capacitance on EXTAL/XTAL. Typical applications include automotive body electronics, industrial CAN nodes, HVAC control, motor control, and appliance systems where fieldbus connectivity and analog integration matter. Note this specific part is NRND (Not Recommended for New Designs) per NXP; the S08D family offers pin, peripheral, and tool compatibility for migration within the family. When designing in, budget CAN transceiver loading on the TX/RX pins and use 1% reference filtering for the 12-bit ADC. Migration to the automotive-qualified S9S08DZ60 variants preserves the same flash and RAM sizing. This page synthesizes distributor pricing context, drop-in family alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
MC9S08DZ60CLC - 8-bit HCS08 MCU 60KB Flash 32-LQFP | NXP
MC9S08DZ60CLC

MC9S08DZ60CLC - 8-bit HCS08 MCU 60KB Flash 32-LQFP | NXP

The NXP MC9S08DZ60CLC is an 8-bit HCS08 family microcontroller featuring 60KB of Flash, 4KB of RAM, and a 40-MHz CPU (20-MHz bus), housed in a 32-pin LQFP (7x7 mm) package. It integrates a 24-channel 12-bit ADC, multiple serial communication peripherals, and supports up to 32 interrupt/reset sources, targeting industrial and CAN-enabled embedded designs. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, memory (Flash/RAM), peripherals (ADC, timers, communication modules), and I/O pins on a single die. MCUs sit within the broader hierarchy of microcontrollers -> embedded processors -> semiconductors, and the HCS08 line is a low-power, HC08-compatible family well suited to motor control, body electronics, and CAN-node applications. Key features include 60KB on-chip Flash (60K x 8), 4KB RAM (4K x 8), 25 I/O pins, and an external oscillator interface for system clock flexibility. The part supports up to 32 interrupt/reset sources, integrates a 24-channel 12-bit ADC with 2.5 us conversion time, and includes CAN, SCI, and SPI/I2C peripherals typical of the S08DZ family. The 40-MHz HCS08 core executes the HC08 instruction set with the added BGND instruction, providing backward compatibility with legacy Freescale code while improving code density and execution efficiency. The 20-MHz internal bus and integrated peripherals reduce system BOM cost for CAN and LIN slave node designs. Typical applications include industrial control nodes, automotive body electronics, CAN-based sensor interfaces, HVAC controllers, and small appliances. Designers select this MCU when deterministic 8-bit performance, CAN connectivity, and ample Flash headroom are required in a compact LQFP footprint. When designing with this device, ensure proper decoupling by placing a 0.1 uF ceramic bypass capacitor near each VDD pin and a bulk 10 uF tantalum capacitor across the rails, as recommended in the manufacturer datasheet, to suppress high-frequency switching noise. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S08DZ60CLH - 8-bit CAN MCU, 60KB Flash, 64-LQFP | NXP
MC9S08DZ60CLH

MC9S08DZ60CLH - 8-bit CAN MCU, 60KB Flash, 64-LQFP | NXP

The NXP MC9S08DZ60CLH is a 64-LQFP (10x10 mm) member of the MC9S08DZ60 family of 8-bit HCS08 microcontrollers with an integrated CAN (MSCAN) peripheral, designed for cost-sensitive embedded CAN nodes. It runs from an enhanced HCS08 CISC core at up to 40 MHz (20 MHz bus) and integrates 60 KB of on-chip Flash, 4 KB of RAM, an analog comparator, a CAN 2.0 A/B controller (MSCAN), a 24-channel 12-bit ADC, and up to 54 general-purpose I/O pins plus one input-only pin, giving designers a single-chip solution for body and chassis automotive networking, industrial CAN nodes, and consumer appliances. An 8-bit embedded CAN microcontroller belongs to the broader class of microcontrollers (MCUs), which sit in the integrated-circuit hierarchy as MCU -> microcontroller -> embedded controller -> semiconductor. The MC9S08 subfamily adds an on-chip CAN 2.0 A/B module (MSCAN), making it a member of the "embedded CAN MCU" product type alongside other CAN-enabled 8-bit and 32-bit controllers. By combining the protocol-handling hardware with the analog front-end, the MC9S08DZ60CLH removes the need for an external CAN transceiver-side MCU. Key features include 60 KB Flash / 4 KB RAM, 40 MHz maximum CPU frequency, 54 (+1 input-only) GPIO, integrated MSCAN (CAN 2.0A/B), 24-channel 12-bit ADC, integrated analog comparator, multiple timers (TPM), SCI/SPI/IIC peripherals, and a wide 2.7 V to 5.5 V supply range. The 64-LQFP-EP package is a thermally capable surface-mount option suitable for automotive underhood and industrial cabinet environments. Typical applications include automotive body controllers, HVAC modules, instrument clusters, CAN node endpoints in industrial automation, smart appliances with CAN connectivity, and battery management slave modules that communicate over CAN. When designing with this device, follow the CAN bus termination and isolation guidelines from NXP application notes, place a decoupling capacitor pair (100 nF + 4.7 uF) within 5 mm of the VDD pins, and reserve the background-debug-mode (BKGD) pin for in-circuit programming and debug access. This page synthesizes distributor pricing, drop-in alternatives within the MC9S08DZ60 family, and practical design notes not found in the manufacturer datasheet alone, giving engineers a faster procurement and qualification path.

Cotação Contato
MC9S08DZ60MLC - 8-bit S08DZ MCU, 60KB Flash, 32-LQFP | NXP
MC9S08DZ60MLC

MC9S08DZ60MLC - 8-bit S08DZ MCU, 60KB Flash, 32-LQFP | NXP

The NXP MC9S08DZ60MLC is a 40 MHz 8-bit HCS08 microcontroller with 60 KB Flash and 4 KB RAM in a 32-pin LQFP package (7x7 mm). It belongs to the S08DZ series of MCUs targeting automotive and industrial CAN-connected embedded applications. An 8-bit microcontroller (MCU) is a microprocessor core that processes data 8 bits at a time and integrates Flash, RAM, and peripherals (timers, ADC, communication buses) on a single die. The HCS08 (S08) core runs the HC08 instruction set with the added BGND instruction, executes from a 20-MHz bus at the rated 40-MHz core clock, and is supported by up to 32 interrupt/reset sources. The MC9S08DZ60 series, of which MC9S08DZ60MLC is a member, supports up to 53 general-purpose I/O pins and one input-only pin shared with on-chip peripherals such as timers, serial I/O, ADC, and MSCAN - placing the part within the microcontrollers -> 8-bit MCU -> embedded MCU -> semiconductor device taxonomy. Key features include 60 KB of Flash program memory, 4 KB of RAM, a 40-MHz HCS08 CPU core, an on-chip MSCAN (CAN 2.0B) controller for automotive networking, multiple timer/PWM modules, a 12-bit ADC, and on-chip EEPROM emulation. The 32-LQFP package exposes the smaller-pin-count subset of the family’s peripheral set, suitable for cost-sensitive designs that still need CAN and a generous memory footprint. Architecturally, the device uses the HCS08 Harvard architecture with a 20-MHz internal bus, supports BDM (Background Debug Mode) for in-circuit programming and debug, and integrates a robust low-power mode set with multiple STOP and WAIT modes. The integrated CAN module eliminates the need for an external transceiver’s controller logic, while the 12-bit ADC supports automotive sensor interfaces and industrial analog front-ends. Typical applications include automotive body electronics (BCM, HVAC controls, instrument clusters), industrial CAN nodes (sensor hubs, motor-control peripherals), consumer devices needing CAN connectivity, and battery management peripherals. The 60 KB Flash and 40-MHz core also suit small protocol-conversion gateways and OEM/aftermarket automotive accessories such as door modules and seat controllers. When designing with this part, place decoupling capacitors (100 nF plus bulk) close to each VDD pin and follow NXP’s reference layout for the 32-LQFP (7x7) footprint. The MSCAN pins require a CAN transceiver (e.g., NXP TJA1050) plus proper bus termination; do not connect the CAN lines directly to the MCU without the transceiver. This page synthesizes distributor pricing, NXP/CAN family drop-in variants, and practical design notes that the bare datasheet does not surface in one place.

Cotação Contato
MC9S08DZ96CLF - 8-bit MCU 96KB Flash 40MHz CAN | NXP
MC9S08DZ96CLF

MC9S08DZ96CLF - 8-bit MCU 96KB Flash 40MHz CAN | NXP

The NXP Semiconductors MC9S08DZ96CLF is an 8-bit S08-core microcontroller with 96KB Flash memory, 40MHz CPU clock (20MHz bus), embedded CAN and 2KB EEPROM, housed in a 48-pin LQFP (7x7 mm) package. An 8-bit MCU (microcontroller unit) is a single-chip integrated circuit that combines a CPU core, program Flash, RAM, data EEPROM, and peripherals such as timers, serial interfaces, and analog modules. MCUs form the bottom layer of the embedded processing hierarchy - below 16-bit and 32-bit MCUs and application processors - and are the workhorses of cost-sensitive control tasks in automotive body electronics, industrial automation, and consumer appliances. Key features of the MC9S08DZ96CLF include the 40MHz HCS08 CPU (20MHz internal bus) executing the HC08 instruction set with the added BGND instruction, up to 32 interrupt/reset sources, 96KB of on-chip Flash program memory, 6KB RAM, and 2KB of EEPROM for parameter storage. The embedded CAN module is a headline differentiator, making this family one of the industry's first 8-bit MCUs with on-chip CAN - ideal for automotive networked nodes. Technical depth: the enhanced HCS08 core plus on-chip emulation/debug (single-wire background debug) removes the need for external bond-out pods, while the DZ-family peripheral set (ESCSCI, SPI, IIC, 8-channel 10-bit ADC, timers, and CAN) allows mixed analog/digital nodes to be built with very few external components. Typical applications include automotive body-control nodes, CAN-networked sensors and actuators, industrial control panels, HVAC and appliance controllers, and human-machine interface boards. Design consideration: because the part is flagged NRND by NXP, new designs should evaluate the drop-in S08DZ family siblings listed on this page, and existing designs should plan a last-time-buy strategy before authorized stock depletes. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S08DZ96CLH - 8-bit S08 MCU, 96KB Flash, 40MHz, 64-LQFP | NXP
MC9S08DZ96CLH

MC9S08DZ96CLH - 8-bit S08 MCU, 96KB Flash, 40MHz, 64-LQFP | NXP

The NXP MC9S08DZ96CLH is an 8-bit microcontroller from the S08DZ family, featuring a 40 MHz enhanced HCS08 core, 96 KB of Flash program memory, and 6 KB of on-chip SRAM, packaged in a 64-pin LQFP (10x10 mm). It belongs to the high-performance, low-cost HCS08 family of 8-bit MCU units designed for cost-sensitive embedded designs that still require CAN connectivity, EEPROM, and a rich set of analog and timer peripherals. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), working memory (RAM), and integrated peripherals such as timers, ADCs, communication interfaces, and GPIO. The 8-bit S08 architecture sits in the broad hierarchy MCU -> embedded microcontroller -> semiconductor IC, and is widely used in appliances, automotive body electronics, industrial control, and consumer devices where deterministic interrupt response, low power, and CAN connectivity outweigh the throughput advantage of 32-bit cores. The MC9S08DZ96CLH retains the legacy HC08 instruction set while adding the BGND instruction and improved interrupt handling. Key features of the MC9S08DZ96CLH include 96 KB of on-chip Flash, 2 KB of EEPROM, 6 KB of SRAM, a 40 MHz HCS08 CPU with a 20 MHz bus, an integrated CAN 2.0 module, multiple timers (TPM), a 12-bit ADC, an internal voltage regulator, and low-power STOP/WAIT modes. The 64-LQFP package exposes up to 53 GPIO lines, supporting direct connection to keypad matrices, LED drivers, segment LCDs, and CAN transceivers. From an architectural standpoint, the S08DZ family integrates a 40 MHz pipelined 8-bit core with a 20 MHz peripheral bus and on-chip voltage regulation, allowing single 3.3V or 5V supply operation. The part supports background debug mode (BDM) via the BKGD pin, enabling in-circuit programming and real-time debug without an external ICE. Typical applications include CAN-based automotive body modules (window lift, seat control, climate), industrial control nodes, HVAC controllers, security alarm panels, and appliance control boards. For these uses, the combination of CAN 2.0, on-chip EEPROM, 12-bit ADC, and 64-pin LQFP gives designers a complete BOM in a single IC. When designing with this device, ensure the BDM debug header (BKGD, RESET, VDD, GND) is brought out to a connector for development and field firmware updates. The internal voltage regulator requires a bulk decoupling capacitor on the VDDon pin per the reference manual. This page consolidates distributor pricing, package-specific drop-in alternatives, and practical design guidance that goes beyond the manufacturer datasheet, helping engineers select and qualify the part for production builds.

Cotação Contato