Microcontroladores

Produtos (20.000+)

MK22FN1M0VLK12 - Kinetis K22 120MHz Cortex-M4 1MB MCU | NXP
MK22FN1M0VLK12

MK22FN1M0VLK12 - Kinetis K22 120MHz Cortex-M4 1MB MCU | NXP

NXP MK22FN1M0VLK12 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K22 family, operating at 120 MHz with 1 MB of Flash and 128 KB of SRAM, packaged in an 80-pin LQFP (12x12 mm). It integrates Full-Speed USB, multiple low-power modes, and a rich peripheral set for cost-sensitive embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a programmable peripheral set (timers, ADC, communication controllers). Within the semiconductor taxonomy, MCUs belong to microcontrollers -> microprocessors and controllers -> logic and memory ICs. The Cortex-M4 class adds DSP extensions and an optional FPU, making K22 parts suitable for mixed control-and-signal-processing tasks. Key features include a 120 MHz ARM Cortex-M4 core with single-precision FPU and DSP instructions, 1 MB Flash, 128 KB SRAM, Full-Speed USB 2.0 device/host/OTG, a 16-bit ADC, multiple timers, I2S audio interface, and operation from 1.71 V to 3.6 V. The MK22 sub-family is optimized for low power with multiple Stop and low-leakage modes while preserving analog and digital peripheral breadth. Architecturally, the K22 leverages an efficient Thumb-2 instruction set, integrated voltage regulation for core domains, and a flexible clock tree (FEI, FBI, FBE, PEE, PBI). Hardware CRC, random-number generator, and tamper-detection logic are typical on-chip, and the part supports crystal-less USB operation to reduce BOM cost. Typical applications include industrial control, USB human-interface devices, portable medical instruments, smart energy metering, motor-control BLDC/PMSM drives, and consumer audio accessories. The 1 MB Flash footprint supports large protocol stacks (USB, BLE HCI, graphics), while the 128 KB SRAM enables rich buffering and DSP work. Design consideration: when migrating from K20 to K22, verify the pinout and peripheral mux changes for your package; K22 also exposes more DMA channels. Plan decoupling per NXP AN4830 (Kinetis Hardware Design Guidelines) and reserve a 32.768 kHz crystal footprint for low-power RTC operation.

Cotação Contato
MK22FN1M0VLQ12-FR - 120MHz Cortex-M4F MCU, 1MB Flash | NXP
MK22FN1M0VLQ12-FR

MK22FN1M0VLQ12-FR - 120MHz Cortex-M4F MCU, 1MB Flash | NXP

The NXP MK22FN1M0VLQ12-FR is a 32-bit ARM Cortex-M4F microcontroller from the Kinetis K22 sub-family, delivering 120 MHz CPU performance with 1 MB Flash and 128 KB SRAM in a 144-pin LQFP (20x20 mm) package. It integrates a Full-Speed USB OTG controller with on-chip transceiver and on-chip 3.3 V LDO voltage regulator, optimized for cost-sensitive applications requiring low power flexibility and processing efficiency. The part is supplied on Tape and Reel (suffix -FR per NXP's Kinetis ordering code). A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, and a configurable set of peripherals. The K22 sub-family belongs to the broader ARM Cortex-M microcontroller family, with the Cortex-M4F adding a hardware Floating-Point Unit (FPU) and DSP extensions for signal-processing workloads. MCUs sit hierarchically below microprocessors and above simple logic ICs, forming the processing core of nearly every embedded electronic product. Key features of the MK22FN1M0VLQ12-FR include an ARM Cortex-M4F core with single-precision FPU, 120 MHz maximum CPU clock, 1 MB on-chip Flash program memory (1M x 8 organization), 128 KB SRAM, and a 16-bit SAR ADC with up to 13-bit differential / 12-bit single-ended accuracy on most channels. Integrated communication peripherals include Full-Speed USB OTG, up to three SPIs, two I2C, three UARTs, two CAN (FlexCAN), and an I2S module. The device supports -40C to +105C extended-industrial operating range and operates from a 1.71 V to 3.6 V supply. Architecturally, the K22F combines an efficient Cortex-M4F pipeline, low-leakage SRAM, and an integrated 3.3 V LDO that supports operation from a single 1.8 V to 3.6 V rail. Multiple low-power modes (Wait, Stop, VLPR, VLPS) and a low-power RTC make it suitable for battery-powered designs. The integrated Full-Speed USB OTG transceiver eliminates external PHY components, while the FlexCAN modules enable automotive and industrial networking. Typical applications include USB peripherals and HID devices, industrial sensor hubs, portable medical instruments, home-automation controllers, motor-control BLDC/PMSM drives, and low-cost Human-Machine Interface (HMI) panels with touch or segment-LCD support. The 144-pin LQFP footprint also suits gateways and edge nodes in IoT deployments. When designing with this device, ensure the on-chip 3.3 V LDO is properly decoupled with 100 nF + 4.7 uF caps on VDCDC_IN and VDDQ_VIN, and that the USB VBUS pin handles correct 5 V sensing with a 1 k pull-up. The -FR tape-and-reel variant is functionally identical to the tray-packaged MK22FN1M0VLQ12 and is selected only for surface-mount assembly logistics. This page synthesizes distributor pricing, drop-in alternatives within the Kinetis family, and practical design notes not found in the manufacturer datasheet, providing engineering guidance beyond raw spec repetition.

Cotação Contato
MK22FN1M0VMC12 - Kinetis K22 120MHz Cortex-M4 MCU 1MB Flash | NXP
MK22FN1M0VMC12

MK22FN1M0VMC12 - Kinetis K22 120MHz Cortex-M4 MCU 1MB Flash | NXP

The NXP Semiconductors MK22FN1M0VMC12 is a Kinetis K22 ARM Cortex-M4 microcontroller delivering 120 MHz CPU performance with 1 MB Flash and 128 KB SRAM in a 121-ball MAPBGA (8x8) package. It is part of NXP's cost-optimized K22F sub-family targeted at applications requiring low-power flexibility and processing efficiency with Full-Speed USB connectivity. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals (timers, ADCs, communication interfaces, GPIO) on a single die. The Cortex-M4 architecture belongs to the ARM Cortex-M family (a 32-bit RISC core family widely used in embedded systems), executing the Thumb/Thumb-2 instruction set. The K22F sub-family sits within NXP's Kinetis K series (low-power Cortex-M microcontrollers), itself part of NXP's broader EdgeVerse portfolio of edge-processing microcontrollers and microprocessors. By integrating Cortex-M4 plus DSP extensions and a single-precision FPU, MCUs at this tier replace discrete DSPs in many signal-processing tasks. Key features include a hardware FPU, Full-Speed USB 2.0 on-chip transceiver (crystal-less option), 16-bit SAR ADC, 12-bit DAC, low-power modes down to sub-microamp standby, an LPUART for wake-up from low-power states, and FlexBus external bus interface. The 121-MAPBGA package supports 8 KB of flexible I/O, plus 64 pins of GPIO with interrupt capability. Architecturally the MK22FN1M0VMC12 combines an ARM Cortex-M4 core with on-chip SRAM and Flash, an 8-channel DMA controller, and a 4-channel crossbar switch to keep CPU data-move overhead low. Analog integration (16-bit ADC, 12-bit DAC, comparators, internal voltage reference) removes many external components, while Low-Leakage Wake-Up Unit and low-power real-time clock support battery-friendly run profiles. Typical applications include USB-equipped human-interface devices (HIDs), industrial point-of-sale terminals, low-power wireless sensor nodes, USB medical dongles, smart energy metering, and portable instrumentation that benefits from on-chip Full-Speed USB. The integrated PHY saves the BOM cost of external crystals and 15 kohm pull-downs required by classic USB transceivers. When designing in this part, verify the PCN status with NXP as MK22 part numbers have transitioned through Kinetis lifecycle programs. Decoupling must include 100 nF X7R caps at each supply pin and a bulk 4.7 uF on VDD/VREG, plus a 12 MHz or 16 kHz crystal as dictated by your USB or low-power plan. This page synthesizes distributor pricing, lifecycle context, and engineering design notes for engineers evaluating Kinetis K22 MCU options not consolidated on the NXP product page.

Cotação Contato
MK22FN256CAP12R - 120MHz Cortex-M4 256KB MCU | NXP
MK22FN256CAP12R

MK22FN256CAP12R - 120MHz Cortex-M4 256KB MCU | NXP

NXP Semiconductors MK22FN256CAP12R is a 32-bit ARM Cortex-M4 Kinetis K22 microcontroller operating up to 120 MHz, with 256 KB of flash memory and USB connectivity, in an 80-ball WLCSP package measuring approximately 4.13 mm by 3.56 mm. It combines deterministic embedded processing with extensive analog and communication peripherals for compact embedded systems. A microcontroller is an integrated circuit containing a processor core, memory, and peripherals on one semiconductor die. The Kinetis K22 belongs to the 32-bit MCU, embedded processor, and semiconductor hierarchy. The ARM Cortex-M4 architecture supports efficient control processing, while the K22 peripheral set integrates digital interfaces, analog conversion, timing, and communication functions that would otherwise require separate components. Key verified features include an ARM Cortex-M4 core, a maximum 120 MHz operating frequency, 256 KB flash, USB support, and a 3.3 V supply classification. DigiKey identifies the device as an ARM Cortex-M4 Kinetis K20-family microcontroller in an 80-WLCSP package. The small wafer-level chip-scale package supports compact layouts but requires careful PCB design, assembly process control, and inspection because its ball pitch and pad geometry are finer than those of conventional leaded packages. Technical performance depends on the selected clock configuration, memory organization, peripheral settings, and operating conditions. The supplied search results contain conflicting references to a 48 MHz core frequency on one product-page snippet, while DigiKey and other distributor results identify the device as a 120 MHz part. The 120 MHz value is used here because it appears in the manufacturer-part-derived distributor listing, but engineers should confirm the complete device data sheet and orderable configuration before release. Typical applications include USB-connected data acquisition, compact industrial controllers, consumer accessories, sensor-hub designs, and low-cost embedded control platforms. USB support is useful when a product needs a standard host interface, while the Cortex-M4 core provides enough performance for protocol handling and real-time control tasks. Design considerations begin with PCB layout. An 80-ball WLCSP generally cannot be hand-soldered and should be assembled using an appropriate SMT process. Place decoupling close to supply balls, preserve the exposed-thermal-ball pattern recommended by NXP, and verify the land pattern against the official package drawing before fabrication. This page consolidates verified distributor and manufacturer-part information, flags conflicting source data, and adds practical sourcing and assembly context that should be checked against the official NXP documentation before design release.

Cotação Contato
MK22FN256VMP12 - 120MHz Cortex-M4F MCU 256KB Flash | NXP
MK22FN256VMP12

MK22FN256VMP12 - 120MHz Cortex-M4F MCU 256KB Flash | NXP

The NXP MK22FN256VMP12 is a 32-bit ARM Cortex-M4F microcontroller from the Kinetis K22 family operating at up to 120 MHz, delivering 256 KB of flash and 48 KB of SRAM in a 64-pin MAPBGA (5x5 mm) package. It integrates Full-Speed USB 2.0 with on-chip transceiver (crystal-less option), a 16-bit SAR ADC, multiple timers, and low-power peripherals suitable for cost-sensitive industrial and consumer embedded designs. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (typically flash), data memory (SRAM), and programmable peripherals (ADCs, timers, communication interfaces, GPIO) on a single silicon die. MCUs sit inside the broader category of microprocessors -> processors -> digital ICs -> semiconductors. The K22F family specifically emphasizes low-power flexibility combined with performance efficiency, targeting applications that need Cortex-M4F DSP instructions and floating-point math while keeping bill-of-material costs low. Key features include a Cortex-M4F core with single-precision FPU, 256 KB program flash, 48 KB SRAM, Full-Speed USB 2.0 with on-chip transceiver and crystal-less operation, a 16-bit SAR ADC with up to 16 channels, multiple Low-Power Timer (LPTMR) and FlexTimer (FTM) instances, low-leakage wake-up unit, and operating voltage of 1.71V to 3.6V. The MAPBGA-64 package suits compact handheld designs and supports industrial temperature ranges (-40C to +105C). The K22F architecture uses a Cortex-M4F core with DSP extensions and single-precision floating point, connected through a multi-layer AHB/APB bus matrix for deterministic peripheral access. The on-chip voltage regulator with internal DCDC converter supports low-power Run, Wait, and Stop modes while maintaining RTC and RAM retention, allowing system designers to optimize for battery life without external power-management ICs. Typical applications include industrial HMI panels, USB peripherals such as POS terminals and barcode scanners, low-power sensor hubs, motor control reference designs, and wearable consumer electronics. The integrated USB and 12-bit DAC simplify audio playback or signal-generation designs without requiring an external interface IC. When designing with the MK22FN256VMP12, ensure that the USB pins have proper 90-ohm differential routing if Full-Speed USB is enabled, and place the decoupling capacitor network as close as possible to the VDDA and VDD pins. The MAPBGA-64 footprint requires PCB design with microvia fan-outs for reliable assembly at production volumes. This page synthesizes distributor pricing, drop-in K22F alternatives, and practical design notes not found in the manufacturer datasheet alone, supporting engineers evaluating MK22-family MCU selection for next-generation embedded products.

Cotação Contato
MK22FN512CAP12 - 512KB Flash Cortex-M4 MCU | NXP K22F | WLCSP-80
MK22FN512CAP12

MK22FN512CAP12 - 512KB Flash Cortex-M4 MCU | NXP K22F | WLCSP-80

The NXP MK22FN512CAP12 is a 32-bit ARM Cortex-M4 microcontroller with FPU from the Kinetis K22F sub-family, offering 120 MHz CPU speed, 512 KB of Flash, and 128 KB of SRAM in an 80-pin WLCSP (3.56x4.13 mm) package. It integrates a full-speed USB 2.0 controller with on-chip transceiver, a 16-bit ADC, multiple timers, and NXP's standard Kinetis peripheral set. Background Knowledge: A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as ADCs, communication interfaces, and timers. The Cortex-M4 core belongs to the ARMv7-M architecture family (CPU -> ARM Cortex-M -> Cortex-M4 -> Kinetis K22F) and adds a single-precision floating-point unit and DSP instructions for signal-processing workloads. Kinetis K-series parts sit within NXP's broader Kinetis microcontroller portfolio, designed for industrial, consumer, and medical embedded systems. Key features include 512 KB of embedded Flash, 128 KB of SRAM, 120 MHz core with FPU, USB 2.0 full-speed device/host/OTG with on-chip PHY, a 12-bit/16-bit configurable ADC, multiple serial interfaces (UART, SPI, I2C), low-power run/wait/STOP modes, and an operating voltage range of 1.71 V to 3.6 V. The 80-pin WLCSP package is the smallest-footprint option for the K22F family, intended for space-constrained designs. Technical depth: The K22F integrates a Cortex-M4 core with DSP extensions and an FPU, a high-speed memory-to-memory bus, and a peripheral crossbar switch that allows flexible pin-muxing. Security features include a hardware cryptographic acceleration unit (CAU) and a true random number generator (TRNG) shared across the K2x family. The on-chip USB PHY eliminates the external transceiver, reducing BOM cost for USB-enabled designs. Typical applications include USB peripherals, industrial sensor nodes, portable medical devices, and consumer wearables. The small WLCSP footprint is well suited to PCB-real-estate-limited products, while the 120 MHz CPU and 512 KB Flash support protocols such as USB HID/CDC, BLE host stacks, and modest DSP workloads. Design consideration: When migrating between K22F package options (LQFP/WLCSP), verify pin-mux mapping and supply-pin count differences; WLCSP requires careful PCB pad design and under-fill consideration for harsh environments. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MK22FN512VLH12 - Kinetis K22 120MHz Cortex-M4F MCU 512KB Flash | NXP
MK22FN512VLH12

MK22FN512VLH12 - Kinetis K22 120MHz Cortex-M4F MCU 512KB Flash | NXP

The NXP Semiconductors MK22FN512VLH12 is a 32-bit ARM Cortex-M4F microcontroller with 120 MHz core, 512 KB flash, 128 KB SRAM, full-speed USB, and a hardware floating-point unit, housed in a 64-pin LQFP (10x10 mm) package. It belongs to the Kinetis K22 family, which NXP optimized for cost-sensitive applications requiring low-power operation, USB connectivity, and high analog integration. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (flash), working memory (SRAM), and programmable I/O peripherals. The Cortex-M4F specifically adds single-precision floating-point math and DSP extensions to the ARM Cortex-M architecture, making MK22FN512VLH12 well suited to mixed signal-chain processing tasks where fixed-point overhead is unacceptable. Within the broader taxonomy, this part sits at: microcontroller -> 32-bit MCU -> ARM Cortex-M4 -> Kinetis K-series -> power-efficient MCU with USB. Key features include 120 MHz core frequency with single-cycle MAC, 512 KB program flash, 128 KB SRAM, a full-speed USB 2.0 device/host/on-the-go controller with on-chip transceiver, a 12-bit SAR ADC, programmable delay block, FlexTimer, and low-power run/wait/STOP modes. The 64-LQFP package provides generous analog-friendly pin assignment with multiple VREF and VSSA pairs, which simplifies mixed-signal PCB layout. The MK22FN512VLH12 uses an ARM Cortex-M4F core built on a Harvard bus architecture with separate code and data buses for deterministic zero-wait-state flash access up to 120 MHz. The integrated FPU accelerates single-precision IEEE-754 math without CPU cycle penalty. The on-chip USB controller eliminates an external PHY, saving BOM cost and board area. Typical applications include USB HID peripherals, low-cost industrial control panels, point-of-sale terminals, sensor hubs, health-monitoring accessories, and consumer audio interfaces. Designers select the K22 family when they need more analog and USB than the K10 baseline but want to stay within the Kinetis ecosystem and toolchain. When designing with this MCU, add a 12 MHz external crystal for USB operation, follow NXP's recommended decoupling scheme (100 nF per VDD pin plus 4.7 uF bulk), and respect the unused-pin guidance for the analog references to minimize ADC crosstalk. This page synthesizes distributor pricing, drop-in alternatives within the Kinetis K2x family, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MK22FN512VMP12 - 120MHz Cortex-M4F 512KB MCU | NXP
MK22FN512VMP12

MK22FN512VMP12 - 120MHz Cortex-M4F 512KB MCU | NXP

The NXP MK22FN512VMP12 is a 32-bit ARM Cortex-M4F microcontroller operating at up to 120 MHz, with 512 KB of flash memory, 128 KB of SRAM, and a 64-MAPBGA package measuring 5 mm by 5 mm. It combines an integrated floating-point unit with USB connectivity and analog peripherals for cost-sensitive industrial, medical, and embedded applications. A microcontroller is a compact computer system integrated onto one semiconductor die. It includes a processor core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces. The MK22FN512VMP12 belongs to the NXP Kinetis K22F family and is designed for applications requiring efficient processing, flexible low-power operation, and extensive peripheral integration without a separate floating-point processor. Key features include an ARM Cortex-M4F processor core, 120 MHz maximum operating frequency, 512 KB flash, 128 KB SRAM, full-speed USB connectivity, and integrated analog resources. The floating-point unit supports efficient single-precision arithmetic, while the 512 KB flash capacity accommodates larger embedded applications, USB firmware, and protocol stacks. The 64-MAPBGA package also supports compact, high-density PCB layouts. The device combines a high-performance Cortex-M4F core with low-power design flexibility and a broad peripheral set. Its architecture supports both performance-oriented control and low-power embedded operation, making it suitable for connected equipment that must balance processing throughput, USB functionality, analog measurement, and board-space constraints. The 5 mm by 5 mm package requires careful PCB layout and thermal verification during manufacturing. Typical applications include industrial control systems, medical equipment, USB-connected data acquisition, communications equipment, motor-control systems, and low-power embedded products. NXP describes the family as optimized for cost-sensitive applications requiring USB connectivity, processing efficiency, and high peripheral integration with a floating-point unit. Designers should verify the exact pin multiplexing, package ball assignments, power requirements, clock configuration, and USB routing against the manufacturer datasheet before layout. The 64-MAPBGA package is not a land-grid array with exposed pads in the usual sense; its ball assignments must be checked carefully. For firmware migration, memory-map differences, peripheral availability, and clock-tree behavior should be reviewed instead of assuming that any similar Kinetis part is a drop-in replacement. This page consolidates the verified manufacturer and distributor information, package details, technical positioning, selection guidance, and engineering considerations for engineers evaluating the MK22FN512VMP12.

Cotação Contato
MK22FX512AVLK12 - Kinetis K22 120MHz Cortex-M4F MCU | NXP
MK22FX512AVLK12

MK22FX512AVLK12 - Kinetis K22 120MHz Cortex-M4F MCU | NXP

The NXP Semiconductors MK22FX512AVLK12 is a 32-bit ARM Cortex-M4F microcontroller from the Kinetis K22 sub-family, delivering 120 MHz CPU performance with single-precision floating-point and DSP instructions, housed in an 80-pin LQFP package (12x12 mm). The device integrates 512 KB of program flash and 128 KB of FlexMemory (FlexNVM plus FlexRAM configurable as additional flash or EEPROM), supplemented by 128 KB of on-chip SRAM for data and stack, and a full-speed USB 2.0 OTG controller with on-chip transceiver. A microcontroller (MCU) is a System-on-Chip that combines a processor core, program and data memory, a rich set of peripherals, and I/O interfaces into a single device. Kinetis K22F sub-family MCUs specifically target cost-sensitive applications that require a balance of low power, peripheral flexibility, and processing efficiency, sitting within the broader Kinetis family hierarchy (Kinetis -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> semiconductor). The MK22FX512AVLK12 is the industry workhorse variant of this family, widely used in industrial control, USB peripherals, and human-machine interface subsystems. Key features include an integrated 16-bit ADC with multiple conversion modes, high-speed comparators, FlexTimers with PWM, low-power UART and I2C peripherals, a real-time clock, and a comprehensive clocking scheme. The Cortex-M4F core delivers 1.25 Dhrystone MIPS per MHz with hardware single-precision floating-point acceleration, deterministic interrupt response, and optional DSP extensions. The MCU supports a wide operating voltage range from 1.71 V to 3.6 V and offers multiple low-power modes down to deep-sleep for battery-powered products. Typical applications include industrial control and human-machine interface (HMI) panels, USB HID peripherals such as keyboards and scanners, smart energy metering, point-of-sale terminals, and medical instrumentation. The combination of USB 2.0 full-speed, ample SRAM, and an ADC-rich analog mix-in allows the device to bridge wired connectivity and analog signal acquisition in a single chip. When designing with the MK22FX512AVLK12, ensure all VDD/VSS pin pairs are decoupled with a 100 nF X7R ceramic capacitor placed within 5 mm of each pair, and reserve an additional 4.7 uF bulk capacitor near the MCU to handle USB inrush events. Route the 16-bit data bus with impedance-controlled traces if DDR-like external memory is added, although on-chip memory is usually sufficient. This page synthesizes distributor pricing, drop-in pin-compatible alternatives (same 80-LQFP footprint), and practical layout/design notes that streamline BOM management and selection decisions beyond the manufacturer datasheet.

Cotação Contato
MK22FX512AVMC12 - 120MHz Cortex-M4F MCU, 512KB Flash | NXP
MK22FX512AVMC12

MK22FX512AVMC12 - 120MHz Cortex-M4F MCU, 512KB Flash | NXP

The NXP MK22FX512AVMC12 is a Kinetis K22F sub-family 32-bit ARM Cortex-M4F microcontroller running at up to 120 MHz with an integrated single-precision floating-point unit, 512 KB of program flash, 128 KB of FlexMemory, and 128 KB of SRAM, housed in a 121-pin MAPBGA (8 mm × 8 mm) package. It combines high-performance DSP-class signal processing with a rich set of analog peripherals, including two 16-bit ADCs, two 12-bit DACs, programmable gain amplifiers, and a 12-bit analog comparator, plus a full-speed USB 2.0 On-The-Go controller with integrated PHY. The wide operating voltage range of 1.71 V to 3.6 V and the -40 °C to +105 °C industrial temperature range suit battery-powered and industrial products alike. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program and data memory, and a configurable set of analog and digital peripherals, intended for embedded control tasks. MCUs sit within the broader semiconductor hierarchy as follows: microcontroller -> embedded processor -> integrated circuit -> semiconductor. The K22F family in particular targets cost-sensitive applications that require Cortex-M4 DSP performance plus analog and USB integration in a small BGA footprint. Key features include 512 KB of flash with flash swap capability, 128 KB of FlexMemory that can be allocated between EEPROM emulation and additional program flash, four 32-bit timers, two 16-bit low-power timers, a 12-channel DMA controller, multiple serial interfaces (UART, SPI, I2C), an SDHC card interface, and an integrated FlexIO peripheral. Hardware cryptographic acceleration (AES, DES, and a true random number generator) is also present in this sub-family variant. The 121-MAPBGA package offers a small 8 × 8 mm body while exposing 70+ GPIO and the full set of analog and digital peripherals. The K22F architecture uses a Cortex-M4F core with single-cycle MAC, single-precision FPU, and a tightly-coupled memory interface that gives deterministic interrupt response. The 120 MHz clock, 1.25 DMIPS/MHz core, and DSP extensions make the device suitable for real-time control loops, audio processing, and small protocol stacks simultaneously. The on-chip voltage regulator with multiple low-power modes (Run, Wait, Stop, VLPR, VLPS, LLS, VLLSx) enables deep-sleep currents below a few microamperes when peripherals are gated off. Typical applications include industrial control and HMI, USB peripherals, low-power instrumentation, motor control reference designs, building automation, sensor hubs, and consumer audio docks. The combination of USB 2.0 OTG with 16-bit ADC and DSP-class core is a strong fit for any USB-connected data acquisition product. Designers should pay attention to MAPBGA PCB layout: use microvia or via-in-pad technology if possible, follow NXP's BGA escape routing recommendations, and provide a continuous ground plane underneath the device for both thermal dissipation and signal integrity. Decouple VDD with 100 nF + 4.7 µF per supply pin per the manufacturer reference design. This page synthesizes distributor pricing, drop-in same-brand Kinetis alternatives, and practical BGA layout guidance not found in the manufacturer datasheet alone.

Cotação Contato
MK22FX512VLH12 - 120MHz Cortex-M4F MCU, 512KB Flash, USB | NXP
MK22FX512VLH12

MK22FX512VLH12 - 120MHz Cortex-M4F MCU, 512KB Flash, USB | NXP

The NXP MK22FX512VLH12 is a 32-bit ARM Cortex-M4F microcontroller from the Kinetis K22F sub-family, delivering up to 120 MHz core performance with 512 KB of embedded flash plus 128 KB of FlexMem (configurable as additional flash, EEPROM, or cache), 128 KB of system SRAM, and an integrated Full-Speed USB 2.0 controller with on-chip transceiver, all in a 64-pin LQFP (10 mm x 10 mm) package. It integrates DSP instructions and a single-precision floating-point unit (FPU), making it suitable for signal-processing workloads without software-emulated math. An ARM Cortex-M4 microcontroller is a 32-bit processor core designed by ARM Holdings that combines microcontroller-level interrupt determinism with DSP extensions and (optionally) a single-precision floating-point unit. Cortex-M4 sits within the Cortex-M family (Cortex-M0 -> M0+ -> M3 -> M4 -> M7 -> M33/M85), which itself is a subset of the ARM architecture used in microcontrollers, controllers, and edge processors. The K22F belongs to NXP's Kinetis family of Cortex-M microcontrollers and the broader power-management-IC ecosystem of mixed-signal embedded processors. Key features of the MK22FX512VLH12 include hardware AES cryptography, a 16-bit SAR ADC with up to 24 channels, high-speed comparators, FlexTimers for motor-control PWM, a low-power real-time clock (RTC), low-leakage wakeup unit, and multiple serial peripherals (UART, SPI, I2C, I2S). The integrated USB Full-Speed controller with on-chip PHY supports crystal-less USB operation in compatible board designs, reducing BOM cost and board area. The wide operating voltage range (typically 1.71 V to 3.6 V) and multiple low-power modes support battery-powered applications. Typical applications for the MK22FX512VLH12 include industrial control, IoT edge nodes, embedded automation, motor control (BLDC/PMSM FOC), metering and energy measurement, low-power board designs, USB peripherals, and human-machine interface (HMI) systems. Kinetis K22 devices are AEC-Q100 qualified for certain variants and offer scalability across the Kinetis portfolio. When designing with the MK22FX512VLH12, ensure the USB DP/DM trace impedance meets 90 ohms differential and that decoupling capacitors are within 5 mm of each supply pin. Use the FlexMem region for EEPROM emulation or bootloader partitioning, and consult the Kinetis SDK (KSDK) for driver support. This page synthesizes verified distributor pricing, drop-in and pin-compatible alternatives, datasheet citations, and practical design notes - information not aggregated in any single source, including the manufacturer datasheet.

Cotação Contato
MK22FX512VLL12 - 120MHz Cortex-M4F MCU, 512KB Flash | NXP
MK22FX512VLL12

MK22FX512VLL12 - 120MHz Cortex-M4F MCU, 512KB Flash | NXP

The NXP MK22FX512VLL12 is a 32-bit ARM Cortex-M4F microcontroller from the Kinetis K22 sub-family, integrating 512KB of flash, 128KB of RAM, and 128KB of FlexMemory on a 120MHz core, housed in a 100-pin LQFP (14x14 mm) package. It provides up to 512KB program flash plus FlexMemory (FlexNVM + FlexRAM) for EEPROM emulation, USB 2.0 full-speed with on-chip transceiver, and a rich analog/peripheral set including multiple FTM timers, ADC, DAC, comparators, and communication peripherals. The device operates from 1.71V to 3.6V and is rated for -40C to +105C. A Kinetis K22 microcontroller (MCU) belongs to the ARM Cortex-M4F class of mixed-signal microcontrollers, sitting in NXP's Kinetis portfolio that bridges low-power K0 and high-performance K6x. The K22 sub-family is positioned for cost-sensitive applications that still need DSP instructions, a single-precision FPU, and USB connectivity; in the taxonomy it is a Cortex-M4F -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor device. The FX sub-class emphasizes large flash and full peripheral count. Key features of the MK22FX512VLL12 include 120MHz Cortex-M4F core with DSP and FPU, 512KB flash, 128KB SRAM, 128KB FlexMemory, USB 2.0 full-speed OTG with on-chip transceiver, up to 16-bit ADC, 12-bit DAC, low-power run/wait/stop modes with RTC wake-up, and an extensive timer/PWM set. NXP's Kinetis K22 documentation states these peripherals enable a single-chip solution for industrial control, USB peripherals, and point-of-sale terminals. The architecture combines an ARM Cortex-M4F core with NXP's peripheral bus matrix, low-leakage wake-up unit, and a multi-power-rail design for low-power operation. FlexMemory allows the user to allocate a portion of flash for EEPROM emulation, simplifying data-logging firmware without external EEPROM. Memory-mapped peripheral registers and the standard ARM NVIC provide deterministic interrupt response for real-time control. Typical applications include USB HID/mass-storage devices, industrial sensor nodes with USB diagnostics, point-of-sale terminals, home/building automation controllers, motor control, and portable medical devices. The 100-pin LQFP exposes the broadest peripheral set of the K22 family and supports easy hand-soldering and rework, which suits low-volume and prototype runs. The combination of USB, large flash, and Cortex-M4F DSP makes the MK22FX512VLL12 a strong fit when firmware needs signal-processing or USB-class firmware stacks. When designing with the MK22FX512VLL12, ensure the USB DPULL/DMDL lines are routed as a 90-ohm differential pair and that the VBAT/VLL pins are properly decoupled. Verify your firmware against NXP's K22F reference manual for clock-tree configuration and 1.71V minimum VDD during flash programming; lower VDD will abort flash writes silently. This page synthesizes distributor pricing, drop-in same-package alternatives, and design considerations not aggregated on the NXP product page alone, providing an AEO/AEO-friendly reference for engineers evaluating the MK22FX512VLL12.

Cotação Contato
MK22FX512VMC12 - 120MHz Cortex-M4F MCU, 512KB Flash | NXP
MK22FX512VMC12

MK22FX512VMC12 - 120MHz Cortex-M4F MCU, 512KB Flash | NXP

The NXP MK22FX512VMC12 is a 32-bit ARM Cortex-M4F microcontroller from the Kinetis K22F sub-family, delivering 120 MHz CPU performance with 512 KB of embedded flash memory and 128 KB of SRAM, housed in a 121-pin MAPBGA (8x8 mm) package. Operating from 1.71 V to 3.6 V, the device supports multiple voltage domains (1.8 V, 2.5 V, and 3.3 V) for mixed-signal I/O flexibility and is targeted at cost-sensitive applications requiring low-power flexibility and processing efficiency. What is a Kinetis K22F microcontroller? The K22F sub-family sits within NXP's Kinetis portfolio of ARM Cortex-M4 microcontrollers, optimized for applications that balance low-power operation, USB connectivity, and DSP-class signal processing. K22F devices integrate an FPU, a flexible low-power ARM Cortex-M4 core, and a peripheral set including USB 2.0 full-speed on-the-go, multiple serial interfaces, and a 16-bit SAR ADC. The K22 family is positioned as the bridge between the K10 entry-level family and the K60/K70 high-performance families, offering USB plus floating-point math at moderate price points. Key features of the MK22FX512VMC12 include a Cortex-M4F core with single-precision FPU, 512 KB flash with 128 KB FlexMemory, 128 KB SRAM, full-speed USB 2.0 OTG with on-chip transceiver and internal pull-up/pull-down resistors, a 16-bit SAR ADC with up to 24 channels, DMA controllers, and a wide operating voltage range from 1.71 V to 3.6 V. The device also integrates a low-power real-time clock, multiple low-power modes (Run, Wait, Stop, VLPR, VLPS, LLS, VLLSx), and a programmable interrupt controller. The 121-MAPBGA package supports compact PCB layouts while providing ample I/O for mixed-signal designs. Architecturally, the K22F MCU employs a Harvard bus structure with separate code and system buses, single-cycle flash access, and a tightly coupled peripheral bridge for deterministic I/O. The FlexMemory block supports configurable EEPROM emulation, allowing portions of the flash array to be split between program code and data EEPROM without external storage. Typical applications include industrial control nodes, USB HID peripherals, low-power sensor hubs, handheld data loggers, building automation, and consumer devices needing USB device or host connectivity. The wide voltage range and low-power modes make it suitable for battery-powered instruments. Designers should pay particular attention to the PCB layout for the MAPBGA land pattern, the USB DP/DN trace impedance (90 ohm differential), and the decoupling network (typically a 0.1 uF capacitor per VDD pin plus a bulk capacitor) to maintain signal integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MK22FX512VMD12 - 120MHz Cortex-M4F MCU, 512KB Flash, USB, 144-MAPBGA | NXP
MK22FX512VMD12

MK22FX512VMD12 - 120MHz Cortex-M4F MCU, 512KB Flash, USB, 144-MAPBGA | NXP

The NXP MK22FX512VMD12 is a Kinetis K22 microcontroller built around an ARM Cortex-M4F core with single-precision FPU, running up to 120 MHz, integrating 512 KB of program flash plus 128 KB of FlexMemory and 128 KB of SRAM, and housed in a 144-pin MAPBGA package (13 x 13 mm). The K22 sub-family adds a full-speed USB OTG transceiver with crystal-less operation, a 16-bit SAR ADC, multiple timers, and the low-power Kinetis peripheral set, making it a strong fit for cost-sensitive embedded nodes that need USB connectivity without a separate PHY. What is a Kinetis K microcontroller? The Kinetis K series is NXP's Cortex-M4 based MCU portfolio organized into sub-families (K10/K20/K22/K60/K70) that share peripheral IP but scale flash, RAM, and package. The K22 sits in the mid-range with 512 KB flash, 128 KB RAM, and integrated USB OTG. In the broader taxonomy, this part is a 32-bit microcontroller -> ARM Cortex-M MCU -> Kinetis K-series -> K22 sub-family -> general-purpose embedded controller. USB OTG, FPU, and FlexMemory are its three defining technology differentiators versus older K10/K20 parts. Key features include 120 MHz CPU with FPU, 512 KB flash, 128 KB FlexMemory (EEPROM emulation), 128 KB SRAM, full-speed USB OTG with on-chip transceiver, 16-bit SAR ADC, 12-bit DAC, multiple DMA channels, and low-power Run / VLPR / VLPS / LLS / VLLS modes. The part supports -40 C to +105 C industrial temperatures and is suitable for IEC 60730 class B safety applications. Hardware cryptography and tamper detection are not included, so secure boot must be implemented in firmware. Technical depth: The K22 uses a Cortex-M4F core with DSP instructions and single-precision FPU, an 8-channel DMA, a multi-purpose FlexBus external bus controller, and a programmable gain amplifier. The MAPBGA 144-pin package exposes rich I/O including up to 4 UART, 3 SPI, 2 I2C, 2 CAN, USB OTG, and an SDHC interface. The MAPBGA 144 has a typical thermal resistance theta_JA of approximately 30-35 C/W on a 4-layer JEDEC test board. Typical applications include industrial control, USB human-interface devices, point-of-sale terminals, low-power sensor hubs, motor control with FOC, building automation, and portable medical accessories. The combination of FPU, USB, and 128 KB RAM supports real-time control loops and USB stacks on a single die. Design consideration: Route the MAPBGA fan-out on a 4-layer PCB minimum with micro-vias; supply the VBAT pin from a backup battery if RTC retention is needed across power cycles; configure the MCG mode (FEI/FEE/PBE/PEE) before enabling the on-chip USB transceiver to ensure 48 MHz USB clock accuracy. This page synthesizes distributor pricing, same-package K-series alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MK24FN1M0VDC12 - 120MHz Cortex-M4 K24 MCU, 1MB Flash | NXP
MK24FN1M0VDC12

MK24FN1M0VDC12 - 120MHz Cortex-M4 K24 MCU, 1MB Flash | NXP

The NXP Semiconductors MK24FN1M0VDC12 is a Kinetis K24 32-bit ARM Cortex-M4 microcontroller running at up to 120 MHz, integrating 1 MB of flash and 256 KB of SRAM in a 121-ball XFBGA (8 mm x 8 mm) package. It targets low-power, cost-sensitive embedded designs that demand high-performance processing and large on-chip memory densities, with Full-Speed USB and a rich mix of analog and communication interfaces for industrial, medical, and consumer applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (flash), working memory (SRAM), and peripheral interfaces (UART, SPI, I2C, ADC, timers, GPIO). The K24 belongs to the Kinetis K-series Cortex-M4F microcontrollers -> ARM Cortex-M family -> 32-bit MCU -> embedded processor -> semiconductor device hierarchy. The Cortex-M4F core adds a single-precision IEEE-754 floating-point unit, a Memory Protection Unit, and DSP extensions, enabling efficient fixed-point and floating-point signal processing for sensor fusion and motor control. The XFBGA-121 package with 8 mm x 8 mm body and 0.5 mm pitch supports compact board layouts typical of wearables, IoT gateways, and space-constrained industrial controllers. Key features include 1 MB flash with 256 KB SRAM, a 16-bit ADC with selectable single-ended or differential inputs, 12-bit DAC, FlexTimer/PWM modules, low-power run/wait/stop operating modes, full-speed USB 2.0 on-chip transceiver, multiple serial communication blocks (UART, SPI, I2C), and an operating temperature range suitable for industrial environments. The integrated low-power segment LCD driver is a differentiator versus general-purpose Cortex-M4 MCUs that lack display support. The architecture pairs a Cortex-M4F core with NXP's low-leakage wake-up unit and a multi-power-rail design. It supports up to 120 MHz core clock with a flexible clock tree: fast internal reference, slow internal reference, RTC oscillator, and system PLL. The rich peripheral set enables direct connection to mixed-signal sensors, motor-driver stages, and USB hosts or devices. Typical applications include industrial sensor hubs, USB-based data loggers, building automation controllers, low-power medical monitoring devices, and human-machine interface (HMI) terminals with segment-LCD displays. The combination of large flash and on-chip USB is particularly valuable for firmware-over-USB product-update workflows and for compact point-of-care instruments. When designing with this device, allocate at least one decoupling capacitor pair (100 nF plus 4.7 uF) per power pin and route the XFBGA-121 inner balls to inner layers with via-in-pad or dog-bone fan-out to keep the breakout routable on a 4-layer PCB. Confirm pin muxing through the KSDK/PinTool configuration; mismatched peripheral assignments are the most common first-prototype failure on Kinetis designs. This page synthesizes distributor pricing, drop-in same-package K24 alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and design engineers a single reference for component selection.

Cotação Contato
MK24FN1M0VLL12 - 120MHz Cortex-M4F 1MB Flash MCU | NXP
MK24FN1M0VLL12

MK24FN1M0VLL12 - 120MHz Cortex-M4F 1MB Flash MCU | NXP

The NXP MK24FN1M0VLL12 is a Kinetis K24F microcontroller featuring an ARM Cortex-M4F core with FPU running at up to 120 MHz, integrating 1 MB of flash and 256 KB of SRAM in a 100-pin LQFP package. The device targets high-performance, low-power industrial and medical applications requiring large memory densities and flexible peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (flash/RAM), and programmable peripherals (UART, SPI, I2C, ADC, timers, GPIO) into one IC. Kinetis K24F parts belong to the NXP Kinetis family of ARM Cortex-M4 microcontrollers, which sit between 32-bit Cortex-M0+ low-power parts and Cortex-M7 high-performance parts in NXP's MCU portfolio. Key features include a full-speed USB 2.0 OTG controller with device/host/on-the-go modes, dual CAN (FlexCAN) interfaces for industrial networking, a 16-bit SAR ADC, multiple timers (FTM, PIT, RTC, LPTMR), and a low-power ARM Cortex-M4F core with DSP instructions and a single-precision floating-point unit. The 100-pin LQFP package offers 80 GPIO pins for mixed-signal designs. Technically, the MK24FN1M0VLL12 combines a Cortex-M4F core with DSP extensions, an integrated FPU, and a flexible low-power architecture with power and clock gating for peripheral activity. Stop currents are below 340 nA, run currents are 250 uA/MHz, and wake-up from Stop mode is 4.5 us. Full memory and analog operation down to 1.71 V extends battery life across a 1.71-3.6 V supply range. Typical applications include industrial control and HMI, medical patient monitoring, USB peripherals and instrumentation, building automation gateways, and CAN-based networked sensors. The large 1 MB flash makes it suitable for applications requiring over-the-air firmware updates and complex protocol stacks. When designing with this part, ensure the 100-pin LQFP land pattern matches the package and provide adequate bulk decoupling (4.7 uF + 100 nF) near each VDD/VSS pair. Configure the optional low-leakage wake-up unit to wake from specific pins while keeping the core in Stop mode for battery-powered designs.

Cotação Contato
MK24FN1M0VLL12R - 120MHz Cortex-M4 K24 MCU, 1MB Flash, USB | NXP
MK24FN1M0VLL12R

MK24FN1M0VLL12R - 120MHz Cortex-M4 K24 MCU, 1MB Flash, USB | NXP

The NXP MK24FN1M0VLL12R is a 32-bit ARM Cortex-M4F Kinetis K24 microcontroller running at 120 MHz with 1 MB of flash and 256 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) package. It integrates a full-speed USB 2.0 OTG controller, dual CAN interfaces, and a rich analog and communication peripheral set aimed at high-performance industrial and medical applications. What is a Kinetis K24 microcontroller? The Kinetis K24 is a sub-family of NXP's ARM Cortex-M4F portfolio that targets low-power, cost-sensitive applications requiring high-performance processing efficiency and large memory densities. It sits within the broader Kinetis K-series hierarchy (K20/K22/K24/K64), combining the M4F core with floating-point unit, DMA, flexible low-power modes, and a wide range of serial interfaces. The K24 is designed for connected devices where USB, CAN, and Ethernet (via external PHY) are common requirements. Key features of the MK24FN1M0VLL12R include 1 MB program flash, 256 KB SRAM, full-speed USB 2.0 OTG with on-chip transceiver, dual CAN 2.0B controllers, three SPI modules, three I2C modules, four UART modules, 16-bit SAR ADC, 12-bit DAC, programmable delay block, low-power touch-sensing interface, and run currents as low as 250 uA/MHz. Stop-mode currents below 340 nA and 4.5 us wake-up times support battery-powered designs. The device uses a Cortex-M4F core with single-precision FPU, MPU, and DSP extensions. Its flexible clocking topology supports PLL, FLL, and external references, and an integrated 4-channel DMA engine offloads peripheral transfers. The 1.71-3.6 V wide supply range enables direct operation from Li-Ion, 2xAA, or regulated 3.3 V rails, simplifying system power architecture. Typical applications include industrial motor control and HMI, USB-CAN bridges, factory automation nodes, portable medical monitoring, low-power wireless sensor hubs, building automation, and connected consumer products. The K24 family balances compute throughput, memory headroom, and USB/CAN connectivity in one part. When designing with the MK24FN1M0VLL12R, plan decoupling with 100 nF plus 4.7 uF bulk capacitors near each supply pin. Use the KSDK/Kinetis SDK and Processor Expert/Pins tool for peripheral initialization; the device's low-leakage wake-up unit supports up to eight internal modules triggered from low-power modes. PCB layout should give the 100-LQFP thermal pad a copper pour of at least 25 mm^2 to keep junction temperature within range during peak CPU loads. This page synthesizes distributor pricing, drop-in K24-family alternatives, and PCB design guidance not found in the standalone datasheet, giving engineers a faster path from selection to prototype.

Cotação Contato
MK26FN2M0VMI18 - 180MHz Cortex-M4F 2MB MCU | NXP
MK26FN2M0VMI18

MK26FN2M0VMI18 - 180MHz Cortex-M4F 2MB MCU | NXP

The NXP Semiconductors MK26FN2M0VMI18 is a high-performance 32-bit Arm Cortex-M4F microcontroller operating up to 180 MHz, with 2 MB of program flash memory, 256 KB of SRAM, dual USB connectivity, and a 169-MAPBGA package measuring 9 x 9 mm. It is designed for industrial applications requiring substantial embedded storage, high processing performance, security, and low-power operation. A microcontroller is a programmable semiconductor system containing a processor core, memory, and integrated peripherals. Arm Cortex-M4F devices add DSP instructions and single-precision floating-point hardware to the Cortex-M architecture. The MK26 family therefore belongs to the hierarchy microcontroller, embedded processor, processor IC, and integrated circuit, serving as the central control element for connected industrial equipment. Verified device information highlights up to 180 MHz core operation, 2 MB of nonvolatile flash, and 256 KB of SRAM. The part integrates high-speed and full-speed USB physical layers, smart peripherals that retain operation in Stop modes, and enhanced security intended for industrial use. These features support complex control loops, local data processing, human-interface connectivity, and firmware-intensive applications. The 169-MAPBGA package offers high I/O density but requires careful PCB layout, escape routing, assembly capability, and thermal validation. Because the verified sources do not provide the complete pin mapping, electrical limits, or detailed USB transceiver characteristics, those values are not inferred here. Designers should use the official NXP documentation for pin assignments, decoupling, clocking, and PCB land-pattern requirements. Typical applications include industrial human-machine interfaces, USB-connected data loggers, factory equipment controllers, connected sensors, and embedded gateways. Its processing headroom and memory capacity make it suitable where concurrent control, communications, data buffering, and secure firmware handling are required. The dual USB architecture can support high-speed device communication alongside full-speed connectivity, subject to the device-specific implementation. A critical design consideration is package-level routing: the 169-MAPBGA requires advanced assembly and multilayer PCB capability, so pin escape, power integrity, and USB signal routing should be reviewed before layout begins. Verify the exact NXP pinout and reference design because the supplied web results do not expose a complete ball assignment. This page consolidates verified NXP and distributor information, practical package guidance, and clearly marked data gaps. It intentionally avoids invented pin names, electrical limits, lifecycle claims, or substitute specifications that cannot be established from the supplied evidence.

Cotação Contato
MK30DN5127ZVLQ10 100MHz Cortex-M4 512KB MCU | NXP
MK30DN5127ZVLQ10

MK30DN5127ZVLQ10 100MHz Cortex-M4 512KB MCU | NXP

The NXP Semiconductors MK30DN5127ZVLQ10 is a 32-bit Kinetis K30 mixed-signal microcontroller built on an Arm Cortex-M4 core, operating at 100 MHz with 512 KB of flash memory in a 144-LQFP 20 x 20 mm package. The verified listing identifies the K30 family as an LCD and mixed-signal MCU, while the related NXP product page identifies the K30 100 MHz segment LCD MCUs as Cortex-M4 devices with advanced analog integration and serial communication. A microcontroller, or MCU, is a semiconductor that integrates a processor core, program memory, data memory, peripherals, and interface logic into one device. The K30 series sits within the broader MCU hierarchy alongside 8-bit, 16-bit, and 32-bit controllers. Its 32-bit Cortex-M4 architecture, 512 KB program storage, and 100 MHz clock position it for embedded control, human-interface, communications, analog monitoring, and display-oriented systems. The verified information identifies the package as 144-LQFP and the programming interface as SWD and JTAG. It also associates the device with Ethernet, USB 2.0, a segment LCD controller, and a 16-bit ADC. These capabilities make it appropriate for connected industrial controls, data acquisition modules, medical and test instruments, operator panels, and embedded gateways. The available source material does not verify the exact ADC resolution, LCD segment count, SRAM capacity, supply range, or peripheral pin assignments, so those details must be confirmed in the manufacturer datasheet before design release. The target suffix contains the “7” after 512, distinguishing it from the related MK30DN512ZVLQ10 listing. Because the supplied search data does not formally establish that the two MPNs are pin-compatible, engineers should not substitute one for the other without checking the official K30 ordering information, pin multiplexing tables, electrical limits, and exposed programming pins. A practical design begins by assigning every LQFP ball to power, ground, reset, clock, programming, communications, analog, and LCD functions according to the manufacturer datasheet. Route sensitive analog inputs away from switching nodes, provide clean references and bypass capacitors, and verify signal levels against the exact device variant. Firmware must also use the matching K30 memory map, startup code, clock configuration, and peripheral drivers. This page consolidates verified distributor inventory, the official NXP family overview, package information, and engineering cautions that are not available from a raw distributor listing alone. It intentionally distinguishes verified facts from data that still requires confirmation, reducing the risk of an invalid drop-in substitution or incomplete production design.

Cotação Contato
MK30DN512ZVLK10 - Kinetis K30 100MHz Cortex-M4 MCU | NXP | 80-LQFP
MK30DN512ZVLK10

MK30DN512ZVLK10 - Kinetis K30 100MHz Cortex-M4 MCU | NXP | 80-LQFP

The NXP Semiconductors MK30DN512ZVLK10 is a 100 MHz ARM Cortex-M4 microcontroller with 512 KB Flash and 128 KB SRAM, housed in an 80-pin LQFP package. It belongs to the Kinetis K30 family, which adds a segment-LCD controller for human-machine-interface and metering applications. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core with single-precision floating-point, DSP extensions, and a deterministic interrupt controller. Cortex-M4 MCUs sit within the broader microcontroller taxonomy (microcontroller -> 32-bit MCU -> ARM Cortex-M -> Cortex-M4 -> Cortex-M4 with FPU) and dominate applications that require digital signal processing, precise motor control, and low-power operation. The Kinetis K30 subfamily adds integrated segment-LCD drive, which historically required a separate bias-generation IC. Key features include Cortex-M4 with FPU at 100 MHz (1.25 DMIPS/MHz), 512 KB embedded Flash, 128 KB SRAM, a segment-LCD controller supporting up to 8x40 segments, multiple Low-Power modes (Run, Wait, Stop, VLPR/VLPW/VLPS, LLS, VLLS), and 16-bit ADC, DAC, comparators, timers, USB, CAN, and multiple serial interfaces. The wide supply range 1.71 V to 3.6 V allows direct connection to single-cell Li-Ion or 3.3 V regulated rails. Internally, the MK30DN512ZVLK10 combines the Cortex-M4 core with NXP's peripheral platform including FlexMemory (configurable EEPROM and FlexNVM), 12-bit/16-bit ADC modules, programmable delay block, and a flexible low-power peripheral clocking scheme. The 80-LQFP package exposes a wide peripheral set on a 12x12 mm footprint compatible with industrial designs. Typical applications include industrial control, IoT edge nodes, segment-LCD display panels, motor control, single-phase metering, low-power portable instruments, and building automation HMIs. The combination of a capable Cortex-M4 DSP engine with integrated LCD drive makes it well-suited for battery-powered HMI products. When designing with this part, ensure decoupling on all VDD/VSS pairs and follow NXP's Kinetis K30 reference manual for FlexMemory and segment-LCD bias configuration. The lifecycle is flagged NRND on NXP's product page, so consider pin-compatible Kinetis successors or LPC families for new designs. This page synthesizes distributor pricing, lifecycle status, and pin-compatible drop-in alternatives not found in the manufacturer datasheet alone.

Cotação Contato
MK30DN512ZVLL10 - Kinetis K30 Cortex-M4 MCU 512KB | NXP
MK30DN512ZVLL10

MK30DN512ZVLL10 - Kinetis K30 Cortex-M4 MCU 512KB | NXP

The NXP Semiconductors MK30DN512ZVLL10 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K30 family with 512 KB flash memory, 1.71 V to 3.6 V supply range, and 102 general-purpose I/O lines, housed in a 100-pin LQFP (14 x 14 mm, 0.5 mm pitch) surface-mount package. It integrates a segment LCD (SLCD) controller, making it a display-capable MCU for HMI applications. A microcontroller (MCU) is a single-chip computer that combines a processor core, non-volatile memory (flash), SRAM, and peripherals such as timers, serial interfaces, and ADCs. Within the system hierarchy, the MK30DN512ZVLL10 sits at the embedded-control level: ARM Cortex-M4 core, Kinetis K30 series, Kinetis MCU portfolio, NXP semiconductor product line. The Cortex-M4 architecture adds DSP instructions and single-cycle MAC for math-intensive embedded workloads. Key features include the 512 KB on-chip flash program memory, the integrated segment LCD driver peripheral that distinguishes the K30 from the K20 series, a rich peripheral set of serial interfaces (UART, SPI, I2C), analog-to-digital converters, and a multi-purpose clock generator (MCG) supporting internal and external clocking. Wide 1.71 V to 3.6 V operation supports direct 1.8 V, 2.5 V, and 3.3 V power rails. The Kinetis K30 series is built on the ARM Cortex-M4 core with a nested vectored interrupt controller (NVIC) and supports NXP's Kinetis software ecosystem, including MCUXpresso SDK and complementary tooling. The scalable Kinetis portfolio allows pin-compatible migration between family members with different flash sizes and peripheral mixes. Typical applications include segment-LCD human-machine interfaces (utility meters, thermostats, appliance panels), industrial control and monitoring nodes, and consumer embedded systems requiring low-power operation with on-chip display drive. The LCD controller eliminates a separate LCD driver IC, reducing BOM cost. Design consideration: verify the CPU clock configuration against the K30 family data sheet, and observe the 1.71 V minimum supply voltage during brownout conditions; flash write operations require the specified flash-programming voltage range. This page synthesizes distributor availability data, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer data sheet. Pricing is quote-based; specifications marked accordingly reflect gaps in the retrieved web data.

Cotação Contato
MK30DN512ZVMD10 - 100MHz ARM Cortex-M4 Kinetis K30 MCU | NXP
MK30DN512ZVMD10

MK30DN512ZVMD10 - 100MHz ARM Cortex-M4 Kinetis K30 MCU | NXP

The NXP MK30DN512ZVMD10 is a 32-bit ARM Cortex-M4 Kinetis K30 series microcontroller delivering 100 MHz core performance with 512 KB of embedded Flash and 144-MAPBGA (13x13 mm) package, integrating segment-LCD control alongside USB, CAN, and peripheral expansion for human-machine-interface and industrial embedded designs. Key features include ARM Cortex-M4 core with single-precision FPU and DSP instructions, 512 KB program Flash, 64 KB SRAM (with optional 32 KB FlexMem/RAM configuration), segment-LCD controller up to 8x40 segments, USB 2.0 full-speed on-the-go transceiver, CAN 2.0B controller, three SPI modules, two I2C modules, and an SDHC interface. The device operates from a 1.71 V to 3.6 V supply rail and supports an industrial temperature range of -40 C to +105 C. A Kinetis K30 microcontroller (MCU) is a low-power, mixed-signal 32-bit ARM Cortex-M4 device aimed at segment-LCD human-machine-interface applications such as smart thermostats, metering panels, e-bike dashboards, medical patient monitors, and industrial control HMIs. It belongs to the broader Kinetis family of ARM Cortex-M4 microcontrollers and inherits the standard Kinetis peripheral set including low-leakage wake-up units, FlexMemory, and a 16-bit ADC with hardware trigger support. The MK30DN512ZVMD10 architecture pairs the Cortex-M4 core with a multi-channel DMA controller, an external bus interface (FlexBus) for SRAM/PSRAM expansion, and segment-LCD glass-drive waveforms generated by a dedicated SLCD module. The 512 KB Flash supports FlexNVM partitioning to enable EEPROM emulation or additional program/data storage; the on-chip 16-bit ADC provides up to 24 single-ended channels with hardware averaging and DMA-driven sample sequencing. Typical applications include segment-LCD human-machine-interface panels, smart energy metering, USB-connected industrial peripherals, motor-control user-interface boards, and portable medical diagnostic devices. The integrated SLCD controller and rich connectivity mix reduce BOM cost by eliminating an external display driver IC. Designers should review Kinetis K30 reference manual and pin-mux tool when assigning segment-LCD, USB, and FlexBus signals simultaneously - the 144-BGA package exposes most peripherals but some share alternate pins that must be locked early in schematic capture. An external 32.768 kHz crystal and proper decoupling near each VDD/VSS pair are required for stable USB operation. This page synthesizes distributor pricing, K30-family drop-in alternatives, and practical design notes not consolidated on any single manufacturer datasheet.

Cotação Contato
MK30DX128VLL7 - Kinetis K30 72MHz Cortex-M4 MCU, 128KB Flash | NXP
MK30DX128VLL7

MK30DX128VLL7 - Kinetis K30 72MHz Cortex-M4 MCU, 128KB Flash | NXP

The NXP MK30DX128VLL7 is a Kinetis K30 family 32-bit ARM Cortex-M4 microcontroller running at up to 72 MHz with 128 KB of on-chip Flash and an integrated segment LCD (SLCD) controller, housed in a 100-pin LQFP package (14x14 mm). The K30 sub-family is designed as a scalable mid-performance entry point that combines DSP-class signal processing with rich analog integration and flexible low-power modes. A Kinetis K-series microcontroller is a Cortex-M4 based system-on-chip that integrates Flash, SRAM, mixed-signal analog, timers, communication peripherals and various human-machine-interface blocks (LCD, USB, CAN, segments) onto a single die. Within the broader Kinetis portfolio, K30 sits between the cost-optimized K10 and the higher-performance K40/K60/K70 families, sharing peripherals, tool chains and the same enablement ecosystem. The MK30DX128VLL7 includes hardware FPU, 16-bit ADC, 12-bit DAC, comparators and segment-LCD drive. Key features of the MK30DX128VLL7 include 72 MHz Cortex-M4 core with single-precision FPU, 128 KB Flash, 32 KB SRAM, segment LCD driver (up to 8x40 or 8x32 segments depending on package), USB 2.0 full-speed with on-chip transceiver, CAN, I2C, SPI, UART, 12-bit SAR ADC, 12-bit DAC, low-power run/wait/stop modes with VLLS retention. The LQFP-100 package exposes the full peripheral set, making it suited for cost-sensitive HMI designs. The architecture uses a Harvard bus with separate code and data paths and an integrated FPU; this allows deterministic interrupt latency while sustaining DSP-class math throughput for control loops. Internal high-accuracy reference and trim features reduce BOM cost and improve ADC accuracy. Typical applications include low-cost segment-LCD human-machine-interface panels, smart metering, home appliances, industrial control panels, building automation and white-goods user interfaces. The Cortex-M4 plus FPU enables these filters to be implemented efficiently with deterministic execution. Designers should plan for a 2.7-3.6V supply, a 32.768 kHz watch crystal for accurate RTC, and SWsupport all decoupling. Cap included PCB near the MCU. The datasheet defines maximum pin ratings - exceeding them causes permanent damage. This page synthesizes distributor pricing, lifecycle status, drop-in same-package alternatives within the Kinetis family and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MK30DX256VLK7 - Kinetis K30 Cortex-M4 72MHz MCU | NXP
MK30DX256VLK7

MK30DX256VLK7 - Kinetis K30 Cortex-M4 72MHz MCU | NXP

The NXP Semiconductors MK30DX256VLK7 is a 32-bit ARM Cortex-M4 Kinetis K30 segment LCD microcontroller running at 72 MHz with 256 KB flash and 64 KB SRAM, housed in an 80-pin FQFP/LQFP (12x12 mm) package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals onto one die, forming the bottom layer of the embedded systems hierarchy: MCU -> embedded processor -> system-on-chip -> computing platform. The Kinetis K30 sub-family sits in the mid-performance tier of NXP's scalable Kinetis portfolio, differentiated from the K20 by an integrated segment LCD controller for direct drive of glass displays. Key features include the ARM Cortex-M4 core with DSP instructions and single-cycle MAC at up to 72 MHz, 256 KB of flash memory (256K x 8), 64 KB of SRAM, an integrated segment LCD controller, and a 1.71 V to 3.6 V operating voltage range per the manufacturer datasheet. The family provides high-precision analog integration, flexible low-power modes, and up to 32 MHz crystal oscillator plus 32 kHz crystal oscillator clocking options. Technically, the K30 combines the Cortex-M4 pipeline with NXP's mixed-signal peripheral set, supporting flash write across the voltage range and ambient temperature operation up to 105 C. The LCD controller offloads segment driving from software, freeing CPU cycles and reducing power compared with GPIO-driven multiplexing. Typical applications include utility metering (electricity, gas, water), handheld medical instruments, industrial HMI panels, and consumer appliances requiring a low-power LCD user interface. A key design consideration is that the VLK7 speed suffix denotes core voltage and clock configuration - verify the exact supply and temperature grade against the NXP ordering-info table before finalizing the power tree. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato