Microcontroladores

Produtos (18696)

ATSAMA5D23B-CUR - 500MHz Cortex-A5 MPU | Microchip | Industrial
ATSAMA5D23B-CUR

ATSAMA5D23B-CUR - 500MHz Cortex-A5 MPU | Microchip | Industrial

The Microchip ATSAMA5D23B-CUR is an Arm Cortex-A5 microprocessor unit (MPU) from the SAMA5D2 series, delivering up to 500 MHz performance in a 196-ball TFBGA (11x11 mm, 0.8 mm pitch) package. It integrates 128 KB of SRAM and supports DDR2, DDR3L, LPDDR2, LPDDR3, QSPI and e.MMC Flash memories, providing high-value system integration for cost-sensitive embedded applications. What is a microprocessor unit (MPU)? An MPU is a processor that lacks on-chip flash memory and requires external program storage, distinguishing it from a microcontroller (MCU). MPUs like the SAMA5D23 are designed for higher-performance applications requiring rich operating systems (Linux, Android, RTOS), large memory footprints, and complex peripherals. In the broader taxonomy, MPU -> microprocessor -> processor -> integrated circuit -> semiconductor, and the SAMA5D2 series targets industrial, IoT gateway, and human-machine interface (HMI) markets. Key features include an Arm Cortex-A5 core with Neon and TrustZone support, a peripheral touch controller (PTC), embedded audio subsystem, hardware cryptographic accelerators (AES, SHA, TRNG), and multiple connectivity interfaces including USB, Ethernet, CAN-FD, and UART/SPI/I2C. The 0.8 mm ball pitch package simplifies PCB layout by reducing routing complexity compared to finer-pitch BGAs, while the simple power management scheme enables rapid design with low BOM cost. The SAMA5D23 employs a low-power architecture optimized for battery-backed industrial applications, with backup current as low as 5 uA in backup mode. The Cortex-A5 core integrates a single-precision/half-precision FPU and supports the Arm v7-A instruction set with Jazelle RCT and Media Processing Engine extensions, enabling efficient multimedia and signal processing workloads. Typical applications include industrial IoT gateways, building automation controllers, HMI panels, smart energy metering, and connected medical device gateways. The combination of high integration and low power makes the ATSAMA5D23B-CUR particularly well suited for fanless embedded systems running Linux where reliability and long product life cycles are required. When designing with this device, pay close attention to PCB layout: the 0.8 mm ball pitch still requires microvia technology and controlled impedance routing for the DDR interface. Use the SAMA5D2 System-in-Package development ecosystem and follow the Microchip hardware design checklist to validate DDR timing margins across temperature. This page synthesizes real-time distributor pricing, drop-in SAMA5D2 family alternatives, and practical hardware design guidance not aggregated in any single manufacturer document.

Cotação Contato
ATSAMA5D24A-CU - ARM Cortex-A5 MPU 500MHz 256-TFBGA | Microchip
ATSAMA5D24A-CU

ATSAMA5D24A-CU - ARM Cortex-A5 MPU 500MHz 256-TFBGA | Microchip

The Microchip ATSAMA5D24A-CU is a high-performance, ultra-low-power 32-bit ARM Cortex-A5 microprocessor from the SAMA5D2 series, operating at up to 500 MHz with integrated NEON SIMD engine and 128 KB of on-chip SRAM. The device is housed in a compact 256-ball TFBGA (8x8 mm) package, integrates a peripheral touch controller, hardware AES/SHA crypto accelerator (AESOTF), HSIC interface, and supports LPDDR1/LPDDR2/LPDDR3, DDR2/DDR3/DDR3L, and QSPI memory controllers for flexible system memory architectures. A microprocessor (MPU) is a class of integrated circuit that combines a central processing unit, memory management unit, cache, and rich peripherals on a single die. The SAMA5D2 family sits in the broader taxonomy as follows: ARM Cortex-A core -> application processor -> microprocessor (MPU) -> embedded processing IC -> semiconductor. Cortex-A5 MPUs specifically target Linux-capable embedded applications where deterministic real-time response is unnecessary but high throughput, hardware graphics, and advanced connectivity are required. Key features include a peripheral touch controller (PTC) for touch-sensitive HMIs without an external touch IC, a hardware crypto block with AES on-the-fly (AESOTF) decryption for secure boot and encrypted XIP execution, and a high-speed inter-chip (HSIC) USB interface. The integrated LCD controller with graphical acceleration enables cost-effective HMI designs, while the audio subsystem with I2S, SSC, and class-D amplifier support simplifies multimedia product development. Architecturally, the ATSAMA5D24A-CU uses a single-issue, in-order Cortex-A5 core with 32 KB instruction cache and 32 KB data cache, plus a NEON SIMD engine for media workloads and a single-precision floating-point unit. The advanced power management controller (PMC) supports multiple low-power modes including backup mode with 5 µA retention current, enabling battery-powered or energy-harvesting applications. The on-chip secure boot ROM and tamper-detection pins provide hardware root-of-trust. Typical applications include industrial HMI panels, smart home gateways, building automation controllers, medical patient-monitoring terminals, point-of-sale terminals, and Linux-based IoT edge nodes. The combination of Cortex-A5 performance, integrated peripherals, and ultra-low-power modes makes the ATSAMA5D24A-CU particularly attractive for fan-less, sealed-enclosure designs that must run full Linux distributions. When designing with this device, pay attention to PCB layout of the 0.8 mm pitch TFBGA-256 package - it requires laser-drilled micro-vias and 4-layer or 6-layer stack-up for reliable production. Ensure the DDR3/LPDDR2 interface length-matching is verified with the SAMA5D2 PCB design checklist from Microchip. This page synthesizes distributor pricing, drop-in SAMA5D2 family alternatives, and practical design notes for the 256-TFBGA footprint that go beyond the manufacturer datasheet alone.

Cotação Contato
ATSAMA5D24A-CUR - 500MHz Cortex-A5 MPU, 256-TFBGA | Microchip
ATSAMA5D24A-CUR

ATSAMA5D24A-CUR - 500MHz Cortex-A5 MPU, 256-TFBGA | Microchip

The Microchip ATSAMA5D24A-CUR is a high-performance, ultra-low-power ARM Cortex-A5 based 32-bit microprocessor (MPU) operating up to 500 MHz, housed in a 256-ball TFBGA (8x8 mm) package with industrial temperature grade and supplied on tape and reel. The device integrates the Cortex-A5 core with NEON MPE multimedia co-processor, 128 KB internal SRAM, and supports external memories including DDR2, DDR3L, LPDDR2, LPDDR3, QSPI, and e.MMC Flash interfaces, enabling flexible system memory architectures for embedded designs. An ARM Cortex-A5 MPU is a microprocessor unit based on the ARMv7-A architecture that delivers application-processor class performance with very low power consumption, making it the right choice when an MCU is insufficient but a full power-hungry application processor is overkill. The SAMA5D2 family sits in the hierarchy: ARM Cortex-A core -> application-class MPU -> embedded microprocessor -> integrated circuit. The Cortex-A5 implements the ARMv7-A instruction set with optional NEON SIMD and floating-point unit support, balancing MHz-per-mW efficiency with deterministic real-time behavior. Key differentiating features of the ATSAMA5D24A-CUR include 5 uA backup-mode current for battery-backed designs, an embedded peripheral touch controller, hardware AES/OTF crypto accelerators for secure boot, an integrated LCD controller up to WXGA resolution, 10/100 Mbps Ethernet MAC, USB 2.0 with HSIC, and multiple connectivity peripherals (CAN, I2S, I2C, SPI, UART). The SAMA5D2 architecture uses a simple power management scheme that eliminates external PMIC complexity for many designs. The 8x8 mm ultra-small BGA package enables high-density PCB layouts while the industrial temperature grade (-40C to +85C) suits HMI and industrial gateway deployments. Typical applications include industrial HMI panels, smart energy gateways, barcode scanners, building automation controllers, medical patient monitors, and portable data acquisition terminals. The 256-TFBGA package supports high-speed signal routing while keeping the PCB footprint compact enough for space-constrained designs. When designing with this part, allocate sufficient PCB layers (at least 4) for the DDR memory interface and follow Microchip application notes for BGA fanout and decoupling. The enable pin and reset architecture support clean power sequencing with backup battery domains.

Cotação Contato
ATSAMA5D24B-CU - 500MHz ARM Cortex-A5 MPU, 256-TFBGA | Microchip
ATSAMA5D24B-CU

ATSAMA5D24B-CU - 500MHz ARM Cortex-A5 MPU, 256-TFBGA | Microchip

The Microchip ATSAMA5D24B-CU is a 32-bit ARM Cortex-A5 microprocessor from the SAMA5D2 series operating at up to 500 MHz in a 256-pin TFBGA (8x8 mm) package. It integrates 128 KB of SRAM, a 160 KB ROM with secure boot, and a high-speed 16-bit DDR2/LPDDR/LPDDR2/DDR3 (LV-DDR3) memory controller for external RAM expansion. The device is built around a single Cortex-A5 core with NEON media processing extensions and a floating-point unit, targeting ultra-low-power human-machine interface (HMI) and connected embedded applications. An ARM Cortex-A5 microprocessor is a 32-bit application processor core implementing the ARMv7-A architecture with hardware virtualization, MMU, and TrustZone security extensions. Within the broader taxonomy it sits between Cortex-M microcontrollers (which lack MMU) and Cortex-A53/A72 application processors (which target higher performance). The Cortex-A5 is designed for low-cost, low-power Linux-capable compute, placing this part in the application-processor segment of the embedded MPU market. Key features of the ATSAMA5D24B-CU include hardware cryptography (AES, SHA, TRNG), a high-speed USB 2.0 interface with PHY, dual SD/MMC ports, an LCD controller with TFT support, an embedded audio subsystem, a Class-D amplifier interface, and a 12-bit ADC. An integrated peripheral touch controller and resistive touchscreen support reduce BOM cost. The SAMA5D2 architecture is engineered for extensive battery life, consuming as little as 5 uA in backup mode, making it suitable for always-on IoT edge nodes. The SAMA5D24 variant differs from the SAMA5D22 (256 KB SRAM, 2x Ethernet) by offering 128 KB SRAM, 1x Ethernet GMAC, and a smaller peripheral set, while sharing the same 256-TFBGA footprint as the SAMA5D23, SAMA5D24, and SAMA5D27 family members. This compatibility allows designers to scale memory and connectivity within a single PCB layout. The exposed pad and 0.4 mm ball pitch require careful PCB design for thermal dissipation and manufacturability. Typical applications include industrial HMI panels, smart home gateways, wearable health monitors, portable medical devices, point-of-sale terminals, and low-cost Linux-based IoT controllers. The integrated LCD controller and audio subsystem specifically target HMI products with display and sound. Security features make it appropriate for connected devices requiring secure boot and encrypted storage. When designing with the ATSAMA5D24B-CU, allocate a 4-layer PCB with continuous ground plane beneath the BGA, follow Microchip's reference design for DDR3 routing (length-matched, 100-ohm differential impedance), and supply 1.2 V to the core. The exposed pad must be soldered to a thermal via array for heat extraction at higher ambient temperatures. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes drawn from Microchip's SAMA5D2 reference designs, providing information not consolidated in the manufacturer datasheet alone.

Cotação Contato
ATSAMA5D24B-CUR - 500MHz Cortex-A5 MPU, 256-TFBGA | Microchip
ATSAMA5D24B-CUR

ATSAMA5D24B-CUR - 500MHz Cortex-A5 MPU, 256-TFBGA | Microchip

The Microchip Technology ATSAMA5D24B-CUR is a high-performance, low-power Arm Cortex-A5 microprocessor unit (MPU) running up to 500 MHz, packaged in a compact 256-ball TFBGA (8x8 mm) industrial-temperature green/RoHS-compliant package and shipped on tape-and-reel (CUR suffix). It integrates 128 KBytes of L1 instruction cache, 128 KBytes of L1 data cache, and a 128 KByte L2 cache, with floating-point and NEON SIMD engines for multimedia acceleration. The device supports DDR2/DDR3L, LPDDR2/LPDDR3 system memory plus QSPI and e.MMC Flash for non-volatile storage, and exposes a Peripheral Touch Controller (PTC) plus an embedded audio subsystem for HMI and voice front-ends. What is an Arm Cortex-A5 MPU? An MPU (Microprocessor Unit) is a class of application processor that relies on external memory for program and data storage, in contrast to a microcontroller (MCU) which integrates Flash and SRAM on-chip. The Cortex-A5 core is Arm's smallest, lowest-power 32-bit application core, widely used in industrial HMI, IoT gateways, and cost-sensitive graphical products. The ATSAMA5D24B sits at the integration layer between an MCU (internal memory, deterministic I/O) and a high-end application processor (rich OS, multimedia), trading deterministic real-time latency for higher compute and richer peripheral integration. Key features of the ATSAMA5D24B-CUR include: a hardened hardware crypto accelerator suite (AES, TDES, SHA, True Random Number Generator), a 12-bit ADC with up to 12 channels, an EMAC with 10/100 Mbit Ethernet plus two CAN-FD controllers, and a state-of-the-art secure boot chain with monotonic secure counters and tamper detection. The integrated LCD controller (up to WXGA) and 2D graphics accelerator (widget, composition, blending) simplify GUI design without an external GPU. Technically, the device pairs the Cortex-A5 core with a NEON SIMD/FPU engine, dedicated SRAM for audio and crypto, and a low-power architecture drawing as little as 5 uA in backup mode, enabling battery-backed applications. Industrial temperature grade (-40C to +85C) and BGA-green package qualification position it for harsh-environment deployments. Typical applications include industrial HMI touchscreens, IoT gateways and edge nodes, building-automation controllers, smart-home concentrators, low-end graphical consoles, and secure-connected embedded systems. The combination of CAN-FD, EMAC, USB, and LCD makes it well-suited for automotive infotainment prototypes (non-safety), vending and ticketing kiosks, and medical user-interface panels. When designing with the ATSAMA5D24B-CUR, plan the PCB for fine-pitch BGA escape routing and provide a robust PMIC power tree - downstream designers typically pair it with the MIC2800 or MIC5365 regulators. Validate DDR3L signal integrity with reference-design IBIS models and allocate sufficient decoupling. This page synthesizes distributor pricing, drop-in alternatives drawn from the SAMA5D2 family, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
ATSAMA5D24C-CU - Cortex-A5 MPU 500MHz 256-TFBGA | Microchip
ATSAMA5D24C-CU

ATSAMA5D24C-CU - Cortex-A5 MPU 500MHz 256-TFBGA | Microchip

The Microchip ATSAMA5D24C-CU is a high-performance, low-power ARM Cortex-A5 based embedded microprocessor (MPU) running at up to 500 MHz, packaged in a 256-ball TFBGA measuring 8x8 mm. It integrates 128 KB SRAM, a DDR2/DDR3L/LPDDR2/LPDDR3 controller, QSPI and e.MMC interfaces, hardware video acceleration, and a comprehensive peripheral set including CAN, USB, Ethernet, and a Class D audio amplifier. The part is supplied in industrial temperature grade (CU suffix) and targets low-system-cost, high-value-integration embedded designs. An embedded microprocessor (MPU) is a CPU subsystem integrated with memory controllers and peripheral IP on a single die, distinct from a microcontroller (MCU) which typically combines CPU, RAM, non-volatile storage, and peripherals for standalone operation. MPUs rely on external DDR memory and external flash, enabling higher performance and larger memory footprints than typical MCUs. Within the broader hierarchy, MPU sits under microprocessor -> SoC -> integrated circuit -> semiconductor. Key features of the ATSAMA5D24C-CU include 32 KB L1 instruction cache, 32 KB L1 data cache, a floating point unit, arm TrustZone technology, secure boot, encrypted storage, and an embedded audio subsystem with I2S and Class D amplifier interfaces. The device supports Linux and other RTOS distributions via the mainline kernel, with BSPs maintained by Microchip. Power management includes multiple low-power modes with backup-mode current as low as 5 uA per the datasheet overview, enabling extensive battery life for portable or always-on designs. Architecturally, the device pairs the Cortex-A5 core with a 128 KB L2 cache and a multi-layer bus matrix that provides simultaneous access to DDR memory, peripherals, and DMA engines. The hardware video accelerator supports H.264/VP8 decoding up to 720p, allowing the MPU to drive small-to-mid-size displays without external video decoder ICs. The integrated peripherals, including dual Ethernet GMAC, dual USB (one HS USB host/device with PHY, one HS USB host), and an LCD controller up to XGA, reduce total BOM and PCB area. Typical applications include industrial HMI panels, smart energy gateways, IoT edge nodes, medical point-of-care terminals, and portable consumer devices with audio playback. The 8x8 mm BGA package suits space-constrained designs, and the wide memory interface (DDR2/DDR3L/LPDDR2/LPDDR3) allows designers to balance cost, performance, and power across product variants. When designing with this part, ensure the PCB supports BGA assembly (microvia or laser-drilled stacked vias, controlled-impedance routing for DDR and Ethernet), and verify the PMIC selection against the SAMA5D2 power sequencing requirements documented in the datasheet. A 4-layer stackup with continuous reference planes is recommended for the DDR interface to maintain signal integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
ATSAMA5D24C-CUR - ARM Cortex-A5 MPU 500MHz 256-TFBGA | Microchip
ATSAMA5D24C-CUR

ATSAMA5D24C-CUR - ARM Cortex-A5 MPU 500MHz 256-TFBGA | Microchip

The Microchip ATSAMA5D24C-CUR is a high-performance, ultra-low-power ARM Cortex-A5 MPU running at up to 500 MHz with a single core, 32-bit architecture, housed in a 256-pin TFBGA (8x8 mm) package. It belongs to the SAMA5D2 series and targets industrial applications with extended temperature grade, supporting multiple memory types including DDR2, DDR3L, LPDDR2, LPDDR3, and QSPI/e.MMC flash interfaces. The device integrates a 2D GPU, MIPI DSI LCD controller, 10/100 Ethernet MAC, CAN-FD, and advanced security features. An ARM Cortex-A5 microprocessor is a 32-bit application processor based on the ARMv7-A architecture, designed for embedded systems requiring rich operating system support such as Linux. The Cortex-A5 core within the SAMA5D2 family delivers performance comparable to older ARM9 designs while consuming significantly less power, making it ideal for battery-powered or energy-constrained industrial products. The SAMA5D2 sits within the broader category hierarchy of microprocessor (MPU) -> application processor -> SoC -> integrated circuit. Key features include 5 µA backup current with full state retention, hardware cryptography accelerators (AES, SHA, TRNG), a peripheral touch controller, an embedded audio subsystem with I2S, and up to 1 Gbit DDR2/DDR3L support. The integrated power management unit supports multiple low-power modes including ULP0 (3.5 mA), ULP1-fast, ULP1-slow, and backup, enabling years of battery life in typical IoT edge-node use cases. From an architectural perspective, the SAMA5D24 uses a multi-layer AHB/AXI bus matrix, L1 caches (32 KB I-cache and 32 KB D-cache), and dedicated peripheral DMA controllers for low-latency I/O. The 256-ball TFBGA at 8x8 mm represents an ultra-small footprint that simplifies PCB layout for space-constrained designs while still providing 256 pins for memory and peripheral connectivity. Typical applications include industrial IoT gateways, HMI panels with MIPI displays, smart energy meters, building automation controllers, and connected medical devices. The combination of Cortex-A5 performance and low-power states also suits wearable health monitors and battery-backed remote sensors. Designers should plan for a dedicated 1.2V core supply, a separate 1.8V/3.3V I/O rail, and proper DDR power sequencing. DDR layout requires matched-length traces and 100-ohm differential impedance; refer to Microchip application notes for the SAMA5D2 board design guidelines. This page synthesizes current distributor pricing, drop-in same-package alternatives, and design notes specific to ATSAMA5D24C-CUR implementation, complementing the manufacturer datasheet with engineering context for rapid board bring-up.

Cotação Contato
ATSAMA5D26A-CN - 500MHz ARM Cortex-A5 MPU, 289-LFBGA | Microchip
ATSAMA5D26A-CN

ATSAMA5D26A-CN - 500MHz ARM Cortex-A5 MPU, 289-LFBGA | Microchip

The Microchip Technology ATSAMA5D26A-CN is a high-performance, low-power ARM Cortex-A5 embedded microprocessor (MPU) running up to 500 MHz, housed in a 289-ball LFBGA (14x14 mm) package. It integrates 128 KB of internal SRAM, supports DDR2/DDR3L/LPDDR2/LPDDR3 external memory interfaces, and includes a comprehensive peripheral set including dual Ethernet GMAC, USB 2.0 with PHY, CAN-FD, multiple UART/SPI/I2C, and an LCD controller. An ARM Cortex-A5 MPU (Microprocessor Unit) is a 32-bit application-class processor core from ARM's Cortex-A family, designed for embedded applications requiring Linux/Android operating system support. The Cortex-A5 implements the ARMv7-A architecture with NEON media processing engine, floating-point unit, and TrustZone security extensions. MPUs like the SAMA5D2 series sit at the high end of the embedded processing hierarchy, above microcontrollers (MCUs) but below full application processors, providing GHz-class computing with rich OS support in power-constrained environments. The ATSAMA5D26A variant differentiates from the base SAMA5D2 family by including the ARM TrustZone security extension and the AES/SHA hardware crypto accelerators, making it suited for secure-connected applications. The device supports multiple boot sources including QSPI NOR flash, e.MMC, SD card, and NAND flash through its dedicated QSPI and SDMMC interfaces. Hardware accelerated video decoding for H.264/VP8 and a 2D graphics engine for LCD output are integrated on-chip. Typical applications include industrial IoT gateways, human-machine interface (HMI) panels, smart home control hubs, medical point-of-care devices, and secure-connected edge nodes. The Cortex-A5 core delivers strong single-thread performance while consuming typically under 500 mW at full CPU load, enabling fanless designs with passive cooling. When designing with this device, allocate adequate PCB area for the 14x14 mm BGA package and use microvia/HDI PCB fabrication for signal escape. DDR3L memory routing must follow length-matched fly-by topology for stable operation at 533 MHz. Provide proper decoupling with 100 nF ceramic capacitors per power pin.

Cotação Contato
ATSAMA5D26A-CNR - 500MHz Cortex-A5 MPU, 289-LFBGA | Microchip
ATSAMA5D26A-CNR

ATSAMA5D26A-CNR - 500MHz Cortex-A5 MPU, 289-LFBGA | Microchip

The Microchip Technology ATSAMA5D26A-CNR is a high-performance, low-power Arm Cortex-A5 microprocessor (MPU) running up to 500 MHz, housed in a 289-ball LFBGA package with industrial temperature rating and Tape & Reel packaging. It is part of the SAMA5D2 series and integrates 128 KB of SRAM, a 32 KB instruction cache, and 32 KB data cache, with support for DDR2/DDR3L/LPDDR2/LPDDR3 external memory and QSPI/e.MMC flash interfaces. What is an MPU? A microprocessor unit (MPU) is a system-on-chip class of integrated circuit that integrates a CPU core, memory controllers, peripheral interfaces, and often security accelerators into a single device. Within the embedded hierarchy, an MPU sits above a microcontroller (MCU): Cortex-A5 MPUs run a full operating system such as Linux (typically mainline Linux with the AT91 distribution) and target applications requiring rich GUI, networking stacks, or high-throughput data processing. MPUs require external DRAM and boot media, distinguishing them from MCUs that integrate flash and SRAM internally. Key features of the ATSAMA5D26A-CNR include an Arm Cortex-A5 core with Neon and FPU, hardware crypto accelerators (AES, SHA, TRNG), a 12-bit ADC, dual CAN-FD controllers, USB HSIC, and a Class-D audio amplifier interface. The part includes an ARM TrustZone-aware secure boot mechanism and on-the-fly AES decryption (OTFDC) for external QSPI flash, enabling encrypted code-at-rest solutions. Operating voltage spans 0.85 V to 1.2 V core and 1.65 V to 3.6 V I/O, with industrial temperature grade -40C to +85C. The device integrates a sophisticated peripheral set: 12-bit 1 MSPS ADC with up to 12 channels, two HS USB ports (one with HSIC), two CAN-FD, three I2S/SSC for audio, a graphics LCD controller up to XGA (1024x768), camera interface, EMAC with 1588 PTP support, and 12 FLEXCOMs configurable as USART/UART/SPI/TWI. The 289-ball LFBGA uses a 14x14 mm body with 0.5 mm pitch, optimized for compact industrial designs. Typical applications include industrial IoT gateways, building automation HMI panels, smart energy concentrators, medical patient monitoring terminals, POS and retail terminals, and ruggedized field instruments. The combination of Cortex-A5 throughput, hardware crypto, and Linux ecosystem makes the SAMA5D2 family a strong fit where an MCU is too small and a full Cortex-A53 SoC is over-spec. When designing with the ATSAMA5D26A-CNR, plan power rails carefully: the core requires a DC-DC switching regulator or LDO generating 1.0-1.2 V at up to ~500 mA peak, while the DDR I/O rail needs termination voltage (DDR2) or reference voltage (DDR3L/LPDDR). Use the SAM-BA boot assistant or a recovery SD card image for first-stage programming. Run DDR3L at 1.35 V only, never at the 1.5 V standard, to stay within the supported VDDQ range. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not aggregated in the manufacturer datasheet, providing engineers with a single reference for sourcing and BOM risk mitigation.

Cotação Contato
ATSAMA5D26A-CU - Cortex-A5 MPU 500MHz | 289-LFBGA | Microchip
ATSAMA5D26A-CU

ATSAMA5D26A-CU - Cortex-A5 MPU 500MHz | 289-LFBGA | Microchip

The Microchip ATSAMA5D26A-CU is a high-performance, low-power Arm Cortex-A5 embedded microprocessor (MPU) running up to 500 MHz, packaged in a 289-ball 14x14 mm LFBGA with 0.8 mm pitch. It integrates 128 KB SRAM, hardware cryptography (AES, SHA, TRNG), a Mali-400 GPU-class 2D composition engine, LCD controller with touchscreen, 10/100 Mbps Ethernet MAC, three USB 2.0 ports (one HSIC), dual CAN-FD controllers, and a rich set of connectivity peripherals. The device supports DDR2/DDR3L/LPDDR2/LPDDR3 external memory plus QSPI and e.MMC Flash boot interfaces. An embedded MPU is a microprocessor unit - a CPU-centric SoC that requires external memory (DDR), boot flash, and a power management companion IC to form a complete system. Unlike microcontrollers (MCUs) with on-chip Flash, MPUs such as the SAMA5D2 family run a full operating system (typically Linux) on the Cortex-A5 core and offload real-time tasks to companion MCUs. The hierarchy is: Cortex-A5 -> ARMv7-A -> 32-bit application processor -> embedded MPU -> semiconductor. The 'A5' denotes the high-efficiency Cortex-A5 implementation, which prioritises low power while sustaining application workloads. Key features include industrial temperature range (-40C to +85C), 1.2 V/1.8 V/3.3 V mixed I/O, hardware secure boot, true random number generator, and tamper detection pins. The 'CU' suffix denotes the LFBGA-289 industrial-grade package, while the 'A' revision denotes a silicon rev with bug fixes and security enhancements over earlier SAMA5D2 parts. The MRLA (Mask ROM Loader Alternative) boot path enables in-field firmware updates. Typical applications include HMI panels, IoT edge gateways, industrial PLC controllers, building automation touchscreens, medical patient monitors, and ruggedised Linux-based control units. For automotive, choose the -CN or AEC-Q100 qualified variants; for cost-sensitive designs, consider SAMA5D22/SAMA5D23 lower-end siblings sharing the same LFBGA-289 footprint. When designing the PCB, allocate four DDR routing layers with matched-length byte groups, place the LFBGA on inner layers for microvia fan-out, and respect Microchip's PMIC recommendation (MIC2800 or similar). Decouple each 1.2 V/1.8 V/3.3 V rail with 100 nF plus bulk ceramic. This page consolidates distributor pricing, drop-in SAMA5D2 alternatives, and PCB-level design notes not duplicated in the manufacturer datasheet, enabling faster schematic entry and BOM risk mitigation.

Cotação Contato
ATSAMA5D26A-CUR - 500MHz Cortex-A5 MPU, 289-LFBGA | Microchip
ATSAMA5D26A-CUR

ATSAMA5D26A-CUR - 500MHz Cortex-A5 MPU, 289-LFBGA | Microchip

The Microchip ATSAMA5D26A-CUR is a high-performance, low-power ARM Cortex-A5 microprocessor (MPU) running at up to 500 MHz, housed in a 289-pin LFBGA (14x14 mm) package. It integrates 128 KB SRAM, 160 KB ROM, and a rich peripheral set including DDR2/DDR3L/LPDDR2/LPDDR3 controllers, QSPI and e.MMC flash interfaces, dual EMAC, USB, CAN-FD, and advanced security/crypto accelerators. An ARM Cortex-A5 MPU is a microprocessor unit built on the ARMv7-A architecture - a Harvard-style superscalar core with MMU, caches, and optional NEON/FPU. MPUs run full operating systems (Linux, Android, RTOS) on external memory, distinguishing them from microcontrollers (MCUs) which typically execute firmware from internal flash with no MMU. The Cortex-A5 sits in the low-power end of the application-processor hierarchy (Cortex-A5 -> Cortex-A family -> ARM application processors -> 32-bit embedded processors -> semiconductors), targeting HMI, IoT gateways, and industrial control where deterministic power and small die area matter more than raw performance. Key features include the SAMA5D2 series' hardware cryptography block (AES, SHA, TRNG), secure boot, tamper detection pins, and an LCD controller supporting up to WXGA. The 289-LFBGA package exposes the full SAMA5D26 signal set including dual CAN-FD, three FLEXCOMs (USART/SPI/TWI), two I2S, and 12-bit ADC, enabling direct connection to industrial sensors, displays, and wired networking without external bridges. Architecturally, the SAMA5D26 uses a single-issue, in-order Cortex-A5 core with NEON and FPU, fed by 32 KB instruction and 32 KB data caches backed by a 128 KB system SRAM. The Advanced Interrupt Controller (AIC) and a frequency-scalable LDO allow run, idle, and ultra-low-power modes, while the peripheral DMA controller offloads data movement from the CPU. The hardware crypto block accelerates AES up to 256-bit, SHA-1/256, and provides a true random number generator suitable for TLS key exchange. Typical applications include industrial HMI panels, smart energy gateways, building automation controllers, POS terminals, and IoT edge nodes running Linux. Designers choose the SAMA5D26 over Cortex-M4/M7 MCUs when an MMU and OS are required, and over Cortex-A53/A72 MPUs when power budget or BOM cost dominates. Design consideration: route DDR signals first with length-matched impedance-controlled traces, and dedicate at least one full ground plane beneath the BGA. Decouple each VDD/VBAT/VDDANA pin with a 100 nF ceramic cap as close to the balls as practical. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, accelerating component selection for embedded Linux designs.

Cotação Contato
ATSAMA5D26B-CN - ARM Cortex-A5 MPU 500MHz | Microchip | 289-LFBGA
ATSAMA5D26B-CN

ATSAMA5D26B-CN - ARM Cortex-A5 MPU 500MHz | Microchip | 289-LFBGA

The Microchip Technology ATSAMA5D26B-CN is a 32-bit ARM Cortex-A5 microprocessor unit (MPU) running up to 500 MHz, housed in a 289-LFBGA (14x14) package with 0.8 mm ball pitch. It is part of the SAMA5D2 series, featuring single-core Armv7-A architecture with Arm TrustZone, NEON media processing engine, ETM/ETB support, MMU, 32 kbyte L1 instruction cache, 32 kbyte L1 data cache, and 128 kbyte L2 cache configurable as internal SRAM. The device targets low-power, high-integration embedded applications requiring rich multimedia and security capabilities. An ARM Cortex-A5 MPU (microprocessor unit) is a high-performance applications processor designed to run full operating systems such as Linux, whereas microcontrollers (MCUs) typically run bare-metal or RTOS firmware. Cortex-A5 cores implement the Armv7-A architecture with virtual memory via an MMU, optional NEON SIMD media engine for accelerated audio/video codecs, and TrustZone hardware isolation for secure boot and DRM. Within the broader taxonomy, Cortex-A5 sits between Cortex-A7 and Cortex-M7, offering higher compute density than MCUs while consuming less power than Cortex-A9/A53 designs. Key features of the ATSAMA5D26B-CN include a 128 kbyte L2 cache, configurable as SRAM; an embedded audio subsystem; multiple memory interfaces supporting DDR2, DDR3L, LPDDR2, LPDDR3, QSPI, and e.MMC Flash; state-of-the-art security with secure boot, secure key storage, and crypto accelerators (AES, SHA, TRNG); an ultra-low-power mode with 5 uA backup consumption; and an integrated FUSE controller for OTP configuration. The 0.8 mm ball pitch simplifies PCB design and reduces layer count. Typical applications include industrial HMI panels, smart energy gateways, IoT edge nodes, medical patient monitors, automotive infotainment, point-of-sale terminals, and connected appliances where Linux/Android-class application processing is required alongside secure connectivity and rich peripherals (I2C, SPI, USART, QSPI, CAN, HSIC). The simple power management scheme and low-power architecture extend battery life in portable products. The -CN suffix indicates the industrial temperature grade (-40C to +85C) packaged in LFBGA. When designing with this device, allocate PCB area for the 14x14 mm LFBGA footprint with appropriate microvia stack-up, ensure DDR routing is length-matched within the JEDEC specification, and budget for an external power management IC (PMIC) to supply the multiple voltage rails. The 0.8 mm ball pitch allows use of standard 4-layer PCB processes with laser-drilled microvias. This page synthesizes distributor pricing, drop-in alternatives from the SAMA5D2 family, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
ATSAMA5D26B-CNR - 500MHz Cortex-A5 MPU, 289-LFBGA | Microchip
ATSAMA5D26B-CNR

ATSAMA5D26B-CNR - 500MHz Cortex-A5 MPU, 289-LFBGA | Microchip

The Microchip ATSAMA5D26B-CNR is a high-performance, low-power Arm Cortex-A5 microprocessor (MPU) running up to 500 MHz, integrating 128 KB of SRAM, multiple memory interfaces (DDR2/DDR3L/LPDDR2/LPDDR3, QSPI, e.MMC), and a rich peripheral set in a 289-ball LFBGA 14x14x1.4 mm package supplied on tape and reel. The device belongs to the SAMA5D2 family and is targeted at industrial-grade applications requiring deterministic performance, low power, and high-value integration. A microprocessor (MPU) is an integrated circuit that contains a full central processing unit capable of running an operating system such as Linux, in contrast to a microcontroller (MCU) which typically executes bare-metal or RTOS code from on-chip flash. The Cortex-A5 is an Armv7-A application-class core, and the SAMA5D2 family positions the ATSAMA5D26B-CNR in the power-management, connectivity, and human-machine-interface (HMI) tiers of Microchip's embedded portfolio. Key features include 500 MHz core frequency with Arm NEON and FPU, 128 KB SRAM, 2D graphics LCD controller supporting resolutions up to 2048x2048, dual EMAC with IEEE 1588 support, USB 2.0 high-speed host and device, six FLEXCOMs (USART/SPI/TWI), two CAN-FD controllers, and an embedded audio subsystem with SSC and I2S interfaces. A simple power-management scheme and 0.8 mm ball-pitch package reduce PCB design complexity. The device is built on a low-power process and integrates a hardware cryptographic accelerator, secure boot, tamper detection, and a true random number generator, making it suitable for connected industrial equipment where secure firmware update is required. Industrial temperature range (-40C to +85C) and long-life silicon guarantee ten-year product support typical of Microchip's MPU families. Typical applications include industrial gateways, building automation controllers, HMI panels, low-end audio/video consumer appliances, and connected edge nodes. The dual CAN-FD and 2D LCD controller make the part well suited to vehicle telematics and agricultural equipment where deterministic fieldbus and graphical user interfaces are required. When designing with this MPU, allocate a 4-layer PCB with controlled-impedance routing for DDR3L and USB, and provide a low-jitter 24 MHz crystal plus internal PLL programming per Microchip's SAMA5D2 hardware design checklist. The Boot Assistant ROM (AT25/QSPI) and image signing keys must be provisioned before production. This page synthesizes distributor pricing, drop-in alternatives from the SAMA5D2 family, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
ATSAMA5D26B-CU - ARM Cortex-A5 500MHz MPU, 289-LFBGA | Microchip
ATSAMA5D26B-CU

ATSAMA5D26B-CU - ARM Cortex-A5 500MHz MPU, 289-LFBGA | Microchip

The Microchip ATSAMA5D26B-CU is a high-performance, low-power ARM Cortex-A5 embedded microprocessor (MPU) running up to 500 MHz, packaged in a 289-ball LFBGA (14x14 mm) and offered in a Cu-wire industrial-temperature variant. It is part of the SAMA5D2 series and integrates 128 KB of SRAM, 160 KB of ROM, and a rich peripheral set including dual EMAC, USB, CAN-FD, and a TFT LCD controller with hardware-accelerated graphics overlays. An ARM Cortex-A5 microprocessor (MPU) is a full applications-class processing unit that requires an external memory bus and is intended for systems running a rich operating system such as Linux. MPU cores sit at the top of the embedded processor hierarchy above microcontrollers (MCU), combining a Cortex-A application core with system-level interfaces like DDR memory controllers, display pipelines, and Gigabit Ethernet. The SAMA5D2 series in particular targets human-machine interface (HMI), industrial control, and connected edge nodes where Linux support and rich connectivity matter more than raw core count. Key features include a NEON MPE co-processor for multimedia acceleration, dedicated crypto accelerators (AES, SHA, TRNG), dual 10/100 Ethernet MACs with IEEE 1588 support, three USB 2.0 ports (host/device/HSIC), and a hardware cryptography engine. The device also supports DDR2/DDR3L/LPDDR2/LPDDR3 external memory, QSPI and e.MMC flash interfaces, and a 24-bit TFT LCD controller with resistive/capacitive touch support. Architecturally, the ATSAMA5D26B employs a 32-bit single-core Cortex-A5 with NEON SIMD and a single-precision floating-point unit, paired with 32 KB instruction and 32 KB data caches and a 128 KB system SRAM. The high-bandwidth multi-protocol bus matrix and dedicated peripheral DMA controllers allow concurrent data movement between LCD, EMAC, and crypto blocks without overloading the CPU. Typical applications include industrial HMI panels, building automation gateways, smart energy metering, medical patient monitoring terminals, and Linux-based IoT edge nodes. The wide peripheral set reduces external chip count and BOM cost in systems that need Ethernet, USB, CAN-FD, and a display on the same board. When designing with the ATSAMA5D26B, ensure the DDR controller is properly terminated and that the LFBGA ball pattern uses microvia or via-in-pad PCB technology to maintain signal integrity on the address/command bus. Use Microchip's Linux4SAM BSP and AT91Bootstrap to bring up the SoC, and follow the SAMA5D2 hardware design checklist for power-rail sequencing between VDDVDD, VDDCORE, and VDDIO. This page synthesizes distributor pricing, drop-in SAMA5D2 family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
ATSAMA5D26B-CUR - ARM Cortex-A5 MPU 500MHz 289-LFBGA | Microchip
ATSAMA5D26B-CUR

ATSAMA5D26B-CUR - ARM Cortex-A5 MPU 500MHz 289-LFBGA | Microchip

The Microchip ATSAMA5D26B-CUR is a 32-bit ARM Cortex-A5 microprocessor from the SAMA5D2 family, integrating a single 500 MHz core, NEON MPE co-processor, and a complete multimedia subsystem in a 289-pin LFBGA (14x14) package with 0.8 mm ball pitch. The 'B' silicon revision delivers improved security, refined power management, and extended temperature range compared to earlier 'A' revisions, while the '-CUR' suffix denotes industrial temperature grade and tape-and-reel packaging. An ARM Cortex-A5 MPU (Microprocessor Unit) is an applications-class CPU core implementing the ARMv7-A architecture with optional NEON SIMD and VFPv4 floating-point support. The Cortex-A5 sits within the broader hierarchy: Cortex-A5 -> 32-bit applications core -> ARM Cortex family -> MPU -> system-on-chip. SAMA5D2 MPUs from Microchip integrate the Cortex-A5 with DDR/LPDDR controllers, image sensor interfaces, LCD controllers, Ethernet MAC, USB, and hardware crypto accelerators, replacing discrete host processors in embedded designs. Key features of the ATSAMA5D26B-CUR include: 500 MHz maximum CPU clock, hardware cryptography (AES, SHA, TRNG), dual CAN-FD controllers, a 1 Gbps Ethernet MAC with 1588 PTP support, a 12-bit ISP image sensor pipeline, an LCD controller up to WXGA (1280x720), 5 uA backup-mode current for battery applications, and a low-power 0.8 mm ball-pitch package. The device operates from a single 1.2 V core supply with 1.8 V/3.3 V I/O rails. The SAMA5D2 architecture pairs the Cortex-A5 core with tightly-coupled SRAM, a multi-layer AHB/APB bus matrix, dedicated peripheral DMA, and on-chip OTP for secure key storage. This heterogeneous fabric enables deterministic interrupt latency suitable for industrial HMI and motor-control co-processing while sustaining Linux/Android class application workloads. Typical applications include industrial HMI panels, smart energy gateways, building automation controllers, medical patient monitors, point-of-sale terminals, and ruggedized IoT edge nodes. The wide operating temperature and integrated security engine also make it suitable for automotive aftermarket telematics and fleet-management gateways. When designing with this MPU, ensure the 0.8 mm BGA is mounted on at least a 4-layer PCB with microvia-in-pad capability for the inner-row balls. Provide a low-noise LDO for the 1.2 V core rail and follow Microchip's power-sequencing recommendations in the datasheet to avoid latch-up during warm reset. This page synthesizes distributor stock data, drop-in SAMA5D2 family variants, and practical PCB layout guidance not found in the standalone manufacturer datasheet.

Cotação Contato
ATSAMA5D26C-CN - Cortex-A5 500MHz MPU, 289-LFBGA | Microchip
ATSAMA5D26C-CN

ATSAMA5D26C-CN - Cortex-A5 500MHz MPU, 289-LFBGA | Microchip

The Microchip ATSAMA5D26C-CN is a high-performance, low-power ARM Cortex-A5 32-bit microprocessor (MPU) running up to 500 MHz, housed in a 289-ball LFBGA (14x14 mm, 0.8 mm pitch) package. The device integrates 128 KB SRAM, a floating-point unit, advanced security features including secure boot and cryptographic accelerators, and an embedded audio subsystem. It targets industrial-grade applications with extended temperature support. A microprocessor (MPU) is an integrated circuit containing a complete central processing unit, cache, memory management unit, and peripheral interfaces on a single die. Unlike microcontrollers (MCUs) which integrate flash and RAM on-chip for compact real-time tasks, MPUs typically require external DDR memory and run a full operating system such as Linux. Within the embedded hierarchy, the SAMA5D2 family occupies the MPU tier above Cortex-M microcontrollers but below Cortex-A application processors, providing a balanced trade-off between performance, power consumption, and system cost. Key features include 500 MHz Cortex-A5 core with FPU, 128 KB on-chip SRAM, 16-bit DDR2/DDR3L/LPDDR2/LPDDR3 controller, dual QSPI and e.MMC flash interfaces, hardware cryptography (AES, SHA, TRNG), 5 uA backup current, and an embedded audio subsystem with I2S and class-D amplifier interfaces. The 0.8 mm ball pitch package reduces PCB design complexity compared to finer-pitch alternatives. The architecture combines a Cortex-A5 core with NEON media extensions, hardware crypto engines, and a dedicated audio subsystem that offloads sound processing from the CPU. The deep-sleep power management scheme maintains RTC and 32 KB backup SRAM while consuming only 5 uA, extending battery life in always-on IoT edge nodes. Typical applications include industrial HMI panels, IoT edge gateways, smart energy meters, medical point-of-care devices, and secure connected terminals. The hardware cryptography and secure boot make it suitable for payment terminals and access control systems requiring tamper resistance. When designing with this MPU, plan PCB layout for the 289-ball BGA with at least 4 layers and via-in-pad for signal integrity on DDR traces. Verify DDR timing against the SAMA5D2 hardware design checklist and use Microchip's Linux4SAM BSP for boot validation. This page synthesizes distributor pricing, SAMA5D2 family drop-in alternatives, and practical layout guidance not consolidated in the manufacturer datasheet, accelerating component selection for industrial MPU designs.

Cotação Contato
ATSAMA5D26C-CNR - ARM Cortex-A5 MPU 500MHz 289-LFBGA | Microchip
ATSAMA5D26C-CNR

ATSAMA5D26C-CNR - ARM Cortex-A5 MPU 500MHz 289-LFBGA | Microchip

The Microchip Technology ATSAMA5D26C-CNR is a high-performance, low-power ARM Cortex-A5 microprocessor (MPU) running up to 500 MHz, housed in a 289-pin LFBGA (14x14 mm) package with 0.8 mm ball pitch. The part integrates 128 KB of SRAM, hardware cryptography (AES, SHA, TRNG), and an embedded audio subsystem, and supports DDR2/DDR3L/LPDDR2/LPDDR3 external memories plus QSPI and e.MMC Flash interfaces. An ARM Cortex-A5 MPU belongs to the application processor class of embedded microprocessors — a category higher than microcontrollers (MCUs) because it executes a full operating system (typically Linux) from external memory, while an MCU typically runs bare-metal or an RTOS from on-chip Flash. Within Microchip's SAM family, the SAMA5D2 series sits in the low-power, high-integration tier aimed at industrial HMI, IoT gateways, and connected appliances that need graphical user interfaces or network stacks without the cost of higher-end Cortex-A7/A53 parts. Key features include a single ARM Cortex-A5 core with Neon and FPU, 32 KB L1 I-cache and 32 KB L1 D-cache, a comprehensive peripheral set (EMAC, USB HS, CAN-FD, multiple UART/SPI/I2C, SD/MMC, 12-bit ADC), and dedicated secure-boot and tamper-detection pins. The advanced interrupt controller (AIC) and 12-bit parallel CMOS sensor interface support camera and audio pipelines in fanless designs. Typical applications include industrial human-machine interfaces (HMIs), smart-home gateways, IoT edge nodes, building-automation controllers, and low-power Linux-based point-of-sale terminals. The wide industrial temperature range and low-power modes (shutdown, ultra-low-power) make it suited to always-on battery-backed devices. When designing the PCB, allocate a 4-layer board with continuous reference planes under the BGA, route DDR signals with matched-length tracking, and provide a 1.2 V core supply decoupling network sized for 500 MHz operation. Use a Microchip-supported mainline Linux distribution (e.g., Buildroot or Yocto) and the SAMA5D2 Software Package to shorten firmware bring-up. This page synthesizes distributor pricing, verified drop-in alternatives, and practical PCB/Linux bring-up notes drawn from Microchip application notes and reference designs — context not consolidated on any single distributor or manufacturer page.

Cotação Contato
ATSAMA5D26C-CU - 500MHz ARM Cortex-A5 MPU 289-LFBGA | Microchip
ATSAMA5D26C-CU

ATSAMA5D26C-CU - 500MHz ARM Cortex-A5 MPU 289-LFBGA | Microchip

The Microchip ATSAMA5D26C-CU is a high-performance, low-power ARM Cortex-A5 microprocessor (MPU) running up to 500 MHz, packaged in a 289-ball LFBGA (14x14 mm, 0.8 mm pitch). It integrates 128 KB SRAM, 160 KB ROM with secure boot, and advanced peripherals including a hardware cryptographic accelerator, dual CAN-FD, dual Ethernet GMAC, and a Class-D audio amplifier interface. The device supports DDR2/DDR3L/LPDDR2/LPDDR3 external memory plus QSPI and e.MMC flash for flexible boot and storage. An ARM Cortex-A5 application processor is a 32-bit RISC CPU core designed by Arm Holdings that targets cost-sensitive, power-constrained embedded applications. Cortex-A5 implements the ARMv7-A architecture with optional NEON and FPU, providing a balanced performance-per-watt profile compared to Cortex-A7/A9. Within the broader taxonomy, the SAMA5D2 family sits as MPU > application processor > microcontroller/MPU > semiconductor > integrated circuit. The SAMA5D2 line emphasizes Linux-capable MPUs with hardware security and ultra-low standby power (about 5 µA in backup mode), bridging MCU simplicity with application-processor performance. The ATSAMA5D26C-CU features a hardware AES/SHA/TRNG cryptographic engine, secure boot with tamper detection, MIPI CSI-2 camera interface, 24-bit LCD controller up to 1024x768, USB Host/Device, I2S, and up to 11 UARTs. It is offered in industrial (-40C to +85C) temperature range and operates from a 1.2 V core supply with simple power management scheme (single 3.3 V I/O supply). Typical applications include industrial HMI panels, secure IoT gateways, edge-AI sensor hubs, building automation controllers, and Linux-based point-of-sale terminals. When designing, plan for 0.8 mm pitch BGA fanout, ground-place capacitors under the exposed die pad, and a separate 1.2 V LDO for core. This page combines distributor pricing, SAMA5D2 family drop-in alternatives, and practical design notes that go beyond the datasheet headline specs.

Cotação Contato
ATSAMA5D26C-CUR - 500MHz Cortex-A5 MPU 289-LFBGA | Microchip
ATSAMA5D26C-CUR

ATSAMA5D26C-CUR - 500MHz Cortex-A5 MPU 289-LFBGA | Microchip

The Microchip Technology ATSAMA5D26C-CUR is a high-performance, low-power Arm Cortex-A5 microprocessor unit (MPU) operating at up to 500 MHz, housed in a 289-pin LFBGA (14x14 mm) package. As part of the SAMA5D2 family, it integrates 128 KB of internal SRAM, advanced security features including secure boot, hardware encryption (AES, SHA, TRNG), and rich connectivity including 10/100 Ethernet MAC, USB 2.0 with PHY, CAN-FD, and multiple UART/SPI/I2C interfaces. The device supports external memories including DDR2, DDR3L, LPDDR2, LPDDR3, QSPI, and e.MMC Flash, enabling flexible system designs for cost-sensitive applications. An MPU (Microprocessor Unit) is a class of integrated circuit that integrates a CPU core with memory management and on-chip peripherals, executing a full operating system such as Linux or RTOS. MPUs sit above microcontrollers (MCUs) in the embedded hierarchy: MCU -> MPU -> application processor -> SoC. The Cortex-A5 core delivers an application-class instruction set with MMU support while maintaining power consumption suitable for battery-powered or thermally constrained designs. The 500 MHz operation provides ample headroom for graphical user interfaces, network protocol stacks, and edge analytics. Key features include the Arm Cortex-A5 core with NEON media engine and floating-point unit, dual 10/100 Ethernet MACs with IEEE 1588 support, two High-Speed USB 2.0 ports with integrated PHY, two CAN-FD controllers, and an LCD TFT controller for displays up to WXGA resolution. The peripheral multiplexing allows flexible pin assignment, with dedicated I/O supply rails supporting 1.8V or 3.3V signaling. Security hardening covers secure boot from signed firmware, hardware cryptographic accelerators, and tamper detection pins for anti-tamper designs. Typical applications include industrial HMI panels, building automation gateways, smart energy metering terminals, medical patient monitors, and edge IoT gateways. The combination of deterministic Cortex-A5 performance, low standby power, and Linux support enables rapid deployment of connected products requiring graphical interfaces or networked protocol stacks. The 289-LFBGA package requires careful PCB layout but allows integration of all interfaces in a compact footprint suitable for industrial temperature grade operation from -40C to +85C. When designing with this device, allocate sufficient PCB layers (typically 6 or more) to route the LFBGA ball escape and maintain signal integrity for DDR3L memory. Use the Microchip-provided Linux4SAM distribution and the SAMA5D2 Xplained evaluation board reference design to accelerate firmware bring-up and validate peripherals before committing to layout.

Cotação Contato
ATSAMA5D27A-CN - Cortex-A5 MPU 500MHz LFBGA-289 | Microchip
ATSAMA5D27A-CN

ATSAMA5D27A-CN - Cortex-A5 MPU 500MHz LFBGA-289 | Microchip

The Microchip ATSAMA5D27A-CN is a high-performance, low-power Arm Cortex-A5 microprocessor (MPU) running up to 500 MHz, packaged in a 289-pin LFBGA and shipping in trays. It belongs to the SAMA5D2 series and integrates 128 KB of SRAM plus ROM, a DDR2/DDR3L/LPDDR2/LPDDR3 memory controller, QSPI and e.MMC flash interfaces, and a rich peripheral set including USB, Ethernet, CAN-FD, and an LCD controller. Core voltage is typically 1.2 V, supporting low-power operation in industrial temperature grades. A microprocessor (MPU) is an integrated circuit containing a complete central processing unit capable of running a full operating system such as Linux or RTOS. In the broader hierarchy, an MPU sits above microcontrollers (MCUs) in compute capability, above digital signal processors (DSPs) in system-level integration, and below application processors (APs) in raw multimedia performance. The Cortex-A5 core inside the ATSAMA5D27A-CN implements the Armv7-A architecture with NEON media engine and Floating Point Unit (FPU), giving it enough horsepower for HMI panels, gateway products, and edge-node analytics. Key features include an integrated ARM Cortex-A5 core at 500 MHz, support for DDR2/DDR3L/LPDDR2/LPDDR3 external memory, hardware cryptography accelerator (AES, SHA, TRNG), 10/100 Ethernet MAC with IEEE 1588, two USB 2.0 ports (Host + Device), two CAN-FD controllers, and an LCD TFT controller up to 1024x768. The SAMA5D27A variant specifically integrates an advanced security subsystem including secure boot, tamper detection, and Arm TrustZone for Cortex-A5. Power consumption is optimized through multiple low-power modes including ULP0/ULP1 deep-sleep states with fast wake-up. The architecture uses a multi-layer AHB/APB matrix bus that allows simultaneous transactions between the Cortex-A5 core, DMA controllers, and peripherals, eliminating bus contention in data-intensive applications. Hardware cryptography offloads AES/SHA/TRNG operations from the CPU, freeing the core for application logic. The on-chip LCD controller, image sensor interface, and audio subsystem make it well suited for multimedia-capable industrial gateways. Typical applications include industrial HMI panels with TFT LCD, IoT edge gateways running Linux, smart energy metering terminals, building automation controllers, and POS terminals with secure boot. The advanced security features also make it suitable for payment terminals and access control systems requiring tamper detection. When designing with this part, ensure the PCB provides a 4-layer stackup with controlled impedance for DDR traces, plus adequate decoupling on the LFBGA-289 power rails. Boot mode configuration via BMS pin must be set before reset release. Validate the operating system BSP (Linux buildroot/Yocto or FreeRTOS) compatibility before committing to firmware development. This page consolidates distributor pricing tiers, same-family drop-in alternatives, and engineering design guidance - practical context that augments the manufacturer datasheet's parametric tables.

Cotação Contato
ATSAMA5D27A-CNR - 500MHz Cortex-A5 MPU, 289-LFBGA | Microchip
ATSAMA5D27A-CNR

ATSAMA5D27A-CNR - 500MHz Cortex-A5 MPU, 289-LFBGA | Microchip

The Microchip Technology ATSAMA5D27A-CNR is a high-performance, low-power Arm Cortex-A5 microprocessor (MPU) running up to 500 MHz, packaged in a 289-ball LFBGA with extended temperature grade and Tape & Reel packaging. The SAMA5D2 family integrates powerful peripherals for connected IoT, gateway, and human-machine interface (HMI) applications, and supports multiple memory types including DDR2, DDR3L, LPDDR2, LPDDR3, QSPI, and e.MMC Flash. The device features on-chip security accelerators, a 128-bit AES engine, secure boot, and a true random number generator (TRNG), making it suitable for industrial and consumer products that require robust root-of-trust. An MPU (microprocessor unit) is an integrated circuit containing a complete CPU core plus memory management hardware, external memory controller, and rich peripherals, distinguished from an MCU (microcontroller) by its reliance on external DRAM for program execution. MPU devices like the SAMA5D2 sit in the embedded system hierarchy between microcontrollers and full application processors, enabling rich operating systems such as Linux while keeping power dissipation and BOM cost low. Within Microchip's portfolio, the SAMA5D2 line targets Linux-based edge nodes, panel controllers, and smart-energy gateways that need more compute than an MCU but do not require the multimedia performance of a high-end application processor. Key differentiating features of the ATSAMA5D27A-CNR include an Arm Cortex-A5 core with Neon and Media Processing Engine (MPE) extensions, hardware cryptography including AES, secure boot, tamper detection, and a rich peripheral set that includes dual EMAC (10/100 Mbps) Ethernet with IEEE 1588 support, USB 2.0 with HSIC, CAN-FD, and a 24-bit LCD controller with touchscreen. The integrated Graphic LCD (GLCDC) controller offloads display refresh from the CPU, which is critical for HMI applications that need smooth rendering of menus, icons, and animations. The peripheral mix makes the device well suited to connected industrial control panels, smart appliances, and edge-of-network sensor aggregation gateways. The device is manufactured using a low-power CMOS process and features multiple low-power modes, including a ULP1 retention mode and shutdown mode, enabling battery-backed designs. The 289-ball LFBGA package provides high pin density for the extensive peripheral set, while the -CNR suffix denotes industrial-grade temperature range and Tape & Reel delivery. Typical applications include industrial HMI panels, smart energy and metering gateways, IoT edge nodes running Linux, medical point-of-care terminals, and connected white goods. The Cortex-A5 core supports Linux distributions available from the Yocto project and Buildroot, with Microchip providing a mainline-based BSP. The on-chip security peripherals suit products that need secure firmware update and tamper-resistant key storage. When designing with this MPU, allocate PCB area for the external DDR3L/DDR2 SDRAM, ensure the LFBGA reflow profile matches J-STD-020, and provide adequate decoupling on each power rail. Use Microchip's ATSAMA5D27-SOM evaluation kit as a reference for the DDR routing topology, power sequencing, and Linux bring-up. The integrated security IP should be paired with an external secure element for highest-assurance deployments. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
ATSAMA5D27A-CU - 500MHz Cortex-A5 MPU | Microchip | Embedded
ATSAMA5D27A-CU

ATSAMA5D27A-CU - 500MHz Cortex-A5 MPU | Microchip | Embedded

The Microchip Technology ATSAMA5D27A-CU is a high-performance, low-power ARM Cortex-A5 32-bit microprocessor (MPU) running up to 500 MHz, housed in a 289-pin LFBGA (14x14 mm, 0.8 mm ball pitch) package. The SAMA5D2 series device integrates 128 KB of SRAM, hardware cryptography (AES, SHA, TRNG), and a rich peripheral set including CAN, HSIC, FLEXCOM, QSPI, EMAC, and an LCD controller, making it a single-chip solution for connected embedded applications. An ARM Cortex-A5 MPU is a microprocessor unit based on the ARM Cortex-A5 application-class core, sitting above microcontrollers (MCUs) in the embedded processing hierarchy: MCU -> Cortex-M core -> Cortex-A5 MPU -> Cortex-A7/A53/A72 application processors. Cortex-A5 supports the ARMv7-A architecture with optional NEON SIMD and hardware floating-point, enabling full Linux and Android distributions while maintaining low power consumption ideal for battery-backed and industrial installations. Key features include 500 MHz core speed with 128 KB SRAM, support for DDR2/DDR3L/LPDDR2/LPDDR3 external memory, and multiple boot sources (QSPI flash, e.MMC, NAND, SD card). The device integrates an LCD controller with TFT/MIPI-DSI support, a 12-bit ADC, 12-bit DAC, audio subsystem, and a Peripheral Touch Controller (PTC). Hardware security features include AES (with on-the-fly encryption for external memories), secure boot, and a true random number generator, enabling tamper-resistant IoT edge nodes. The SAMA5D2 architecture combines an ARM Cortex-A5 core with a high-bandwidth multi-layer bus matrix, dual QSPI controllers with XIP, and up to 12 FLEXCOM serial interfaces (each configurable as UART/USART/SPI/TWI). The 0.8 mm ball pitch simplifies PCB layout compared with finer-pitch alternatives, while integrated power management keeps external component count low. According to Microchip's SAMA5D2 datasheet, the device draws under 5 µA in backup mode, supporting extensive battery life for always-on applications. Typical applications include industrial IoT gateways, home and building automation HMI panels, smart energy meters, medical point-of-care devices, and ruggedized handheld terminals. The combination of Linux capability, hardware crypto, and an LCD controller allows a single-chip design without external companion MPUs. When designing with the ATSAMA5D27A-CU, ensure the PCB uses microvia technology for the 0.8 mm BGA escape routing and that the DDR interface is length-matched within 25 mils across byte lanes. The integrated PTC requires careful PCB layout guard-ring routing for moisture immunity in touch-button or touch-slider designs. This page synthesizes real-time distributor pricing, drop-in same-package alternatives, comparison tables, and practical PCB design notes that go beyond the manufacturer datasheet, giving embedded engineers a decision-ready view of the SAMA5D2 family.

Cotação Contato
ATSAMA5D27A-CUR - 500MHz ARM Cortex-A5 MPU | Microchip
ATSAMA5D27A-CUR

ATSAMA5D27A-CUR - 500MHz ARM Cortex-A5 MPU | Microchip

The Microchip ATSAMA5D27A-CUR is a 32-bit ARM Cortex-A5 microprocessor (MPU) from the SAMA5D2 series running at up to 500 MHz, packaged in a 289-ball LFBGA (14x14 mm, 0.8 mm pitch) and offered on Tape & Reel. It integrates a single Cortex-A5 core with NEON, FPU, 32 KB I-cache and 32 KB D-cache, plus dedicated SRAM and a peripheral touch controller, and supports external memories including DDR2, DDR3L, LPDDR2, LPDDR3, QSPI and e.MMC. What is an ARM Cortex-A5 MPU? A microprocessor (Microprocessing Unit, MPU) is a CPU-centric system-on-chip that requires external DRAM and flash for program execution and data storage, as opposed to a microcontroller (MCU) which integrates non-volatile memory on-die. Cortex-A5 is an ARMv7-A application-class core positioned above Cortex-M microcontrollers but below Cortex-A7/A9/A53 in performance; it executes Linux, Android and RTOS with hardware virtualization, full MMU and the NEON SIMD engine. Within the power-management hierarchy of an embedded system, the MPU is the highest-power computational block and drives dynamic voltage scaling to balance battery life against workload. Key features include hardware AES-OTF (on-the-fly encryption) for secure boot and storage, HSIC USB, two CAN-FD controllers, an embedded audio subsystem with I2S/TDM, and a simple power management scheme with 5 uA backup mode current. The 0.8 mm ball pitch package reduces PCB design complexity compared with finer-pitch BGAs, easing layout for cost-sensitive industrial designs. The device targets industrial temperature range (-40 C to +85 C, MRLA marking) and operates at 105 C junction maximum, enabling use in fanless enclosures. Its peripheral mix - CAN, HSIC, AES-OTF, FPU, NEON - is optimised for connected industrial gateways, low-power HMIs, and battery-backed IoT edge nodes. Typical applications include industrial IoT gateways, smart energy meters, building automation controllers, HMI panels and connected medical device interfaces. A simple power scheme plus CAN-FD support makes it well suited for factory automation. Design consideration: PCB layout for the 14x14 LFBGA with 0.8 mm pitch requires 4-layer stack-up with microvia fan-out and matched-length DDR traces for DDR2/DDR3L; route the high-speed USB/HSIC and Ethernet pairs with controlled impedance 90 ohm differential. This page synthesizes distributor pricing, drop-in SAMA5D2 family alternatives, and practical BGA layout notes not found in the manufacturer datasheet.

Cotação Contato
ATSAMA5D27B-CN - ARM Cortex-A5 MPU, 500 MHz, 289-LFBGA | Microchip
ATSAMA5D27B-CN

ATSAMA5D27B-CN - ARM Cortex-A5 MPU, 500 MHz, 289-LFBGA | Microchip

The Microchip Technology ATSAMA5D27B-CN is a high-performance, low-power ARM Cortex-A5 32-bit microprocessor (MPU) running up to 500 MHz, housed in a 289-ball LFBGA (14x14 mm) package with 0.8 mm ball pitch. As part of the SAMA5D2 series, it integrates an ARM NEON SIMD/FPU co-processor for multimedia acceleration, a peripheral touch controller, an embedded audio subsystem, and a 2D graphics accelerator for human-machine interface (HMI) designs. An ARM Cortex-A5 based microprocessor is a 32-bit RISC application processor core designed for industrial-grade embedded systems that require Linux or RTOS support. Within the broader device taxonomy, the Cortex-A5 sits in the ARM Cortex-A family of application processors (above Cortex-M microcontrollers), while the SAMA5D2 family in turn belongs to Microchip's MPU portfolio alongside the older AT91SAM9 series. MPUs of this class typically include an MMU, cache, and external memory controller — features that distinguish them from Cortex-M microcontrollers, which lack MMUs and rely on tightly-coupled internal flash. This hierarchy matters when selecting the right class of device: for headless control tasks a Cortex-M MCU is sufficient, but for full Linux support, multimedia playback, and rich GUIs, an MPU like the ATSAMA5D27B-CN is the correct choice. Key features include up to 500 MHz Cortex-A5 core speed with NEON MPE co-processor and floating-point unit, support for DDR2/DDR3L/LPDDR2/LPDDR3 external SDRAM, and QSPI/e.MMC flash interfaces. Low-power design allows approximately 5 uA in backup mode, while integrated peripherals cover multiple I2C, SPI, UART/USART, QSPI, CAN-FD, USB HSIC, and 10/100 Ethernet MAC. A dedicated 2D graphics engine supports TFT LCD panels up to WXGA resolution with hardware-accelerated overlays. The device is targeted at industrial gateways, HMI panels, smart-home controllers, IoT edge nodes, and point-of-sale terminals. Integrated peripherals and graphics reduce BOM cost and PCB complexity, while the 0.8 mm ball pitch simplifies layout versus finer-pitch alternatives. The wide operating temperature range and industrial-grade qualification make it suitable for harsh-environment deployments requiring long product lifecycles. When designing with the ATSAMA5D27B-CN, pay close attention to PCB escape routing on the 0.8 mm pitch LFBGA and provide adequate decoupling. Use Microchip's ATSAMA5D2 software package (Linux BSP, sama5d2-softpack) to accelerate development, and follow the recommended power-sequencing circuit in the manufacturer datasheet for reliable boot.

Cotação Contato