Microcontroladores

Produtos (18737)

ATSAMD20J17A-AN - 48MHz Cortex-M0+ MCU 128KB Flash 64-TQFP | Microchip
ATSAMD20J17A-AN

ATSAMD20J17A-AN - 48MHz Cortex-M0+ MCU 128KB Flash 64-TQFP | Microchip

The Microchip ATSAMD20J17A-AN is a 32-bit ARM Cortex-M0+ based flash microcontroller delivering up to 48 MHz core performance with 128 KB of Flash and 16 KB of SRAM, housed in a 64-pin TQFP industrial-grade package. It operates from 1.62 V to 3.63 V and supports temperatures from -40C to +105C, making it suitable for industrial, consumer, and metering applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals on a single die. The ATSAMD20J17A-AN belongs to the broader hierarchy of ARM Cortex-M0+ -> Cortex-M series -> 32-bit RISC microcontroller -> embedded processor -> semiconductor IC. As part of Microchip's SAM D20 family, it bridges 8-bit legacy designs to 32-bit performance while preserving low-power operation, a hallmark of the Cortex-M0+ architecture. Key features include a 12-bit ADC and 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC) for capacitive touch sensing, a full-speed USB 2.0 device interface, multiple SERCOM modules (I2C, SPI, UART), a Real-Time Clock (RTC), and six configurable SERCOM ports. The device integrates an Event System, SleepWalking peripherals, and an optional 32 kHz internal oscillator, enabling power-conscious designs with deep-sleep current consumption as low as microampere range. Architecturally, the ATSAMD20J17A-AN uses Microchip's proprietary low-power process technology combined with the ARM Cortex-M0+ core, achieving 0.9 DMIPS/MHz at 48 MHz. The 128 KB Flash and 16 KB SRAM are accessed through a tightly-coupled AHB-Lite bus matrix that minimizes latency for interrupt-driven applications. Hardware CRC, AES, and true random number generator (TRNG) modules support security-sensitive IoT edge nodes. Typical applications include home automation controllers, smart energy metering, industrial sensor nodes, consumer appliances with capacitive touch interfaces, USB peripherals, and low-power IoT edge devices. The integrated 12-bit ADC and 10-bit DAC make it well-suited for mixed-signal front-end designs. When designing with this MCU, allocate proper decoupling (100 nF + bulk 4.7 uF near each VDD pin) and follow Microchip's Atmel START / MPLAB Harmony code-generation flow. Note that the -AN suffix denotes industrial-grade TQFP-64 packaging; for QFN-64 use the -MN variant, and for extended AEC-Q100 temperature use the automotive-qualified suffix. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
ATSAMD20J17A-ANT - 48MHz Cortex-M0+ 128KB Flash MCU | Microchip
ATSAMD20J17A-ANT

ATSAMD20J17A-ANT - 48MHz Cortex-M0+ 128KB Flash MCU | Microchip

The Microchip Technology ATSAMD20J17A-ANT is a low-power, high-performance 32-bit ARM Cortex-M0+ flash microcontroller in the SAM D20J family, featuring 128KB of flash, 16KB of SRAM, and a maximum CPU clock of 48MHz. Housed in a 64-pin TQFP (10x10 mm) industrial-grade package with 1.6-3.6V operating range, it integrates a 12-bit ADC, 10-bit DAC, 256-channel Peripheral Touch Controller, and RTC for energy-aware embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, timers, communication peripherals, and I/O on one die. The Cortex-M0+ architecture used here belongs to the ARM Cortex-M family, the dominant 32-bit core family in low-power embedded systems. The ATSAMD20J17A-ANT sits inside the SAM D20 product line (Microchip's Cortex-M0+ family), which spans 32 to 64 pins and 16KB to 256KB flash. The hierarchy is: microcontroller -> embedded MCU -> ARM Cortex-M MCU -> Cortex-M0+ MCU -> SAM D20 family -> SAM D20J series (64-pin, larger memory) -> ATSAMD20J17A-ANT. Key differentiating features include the Event System inter-peripheral signaling fabric, six SERCOM channels (each configurable as UART, SPI, or I2C), full-speed USB device support on select SAM D20J pins, a 12-bit 350ksps ADC with up to 20 channels, and hardware crypto is not present at this tier. Pin migration paths exist between ATSAMD20J14, J15, J16, J17, and J18 variants, allowing upward memory scaling within the same 64-pin TQFP footprint. Architecturally, the device pairs the Cortex-M0+ core (achieving 2.14 CoreMark/MHz) with a low-power segmented power domain architecture that supports Sleep, Standby, Backup, and Off modes. The integrated 32.768 kHz oscillator and digital Frequency-Locked Loop (DFLL) allow the CPU to run from internal references without external crystals in cost-sensitive applications. Typical applications include home automation nodes, consumer appliances, smart metering endpoints, industrial sensor hubs, and low-cost USB HID peripherals. Its combination of Cortex-M0+ simplicity and SAM D20 peripheral set suits battery-powered IoT edge nodes where deterministic response to peripheral events is required. When designing in this part, pay attention to the decoupling network (one 100nF + one 4.7uF near each VDD pin pair), ensure the NRST reset circuit uses the recommended 10k pull-up with the optional 1nF capacitor, and confirm that your toolchain supports the Cortex-M0+ instruction set. ATSAM-ICE or J-Link debug probes are recommended for development. This page synthesizes distributor stock and pricing, verified drop-in same-package alternatives from Microchip's SAM D20 family, and practical design guidance not collected in a single place on the manufacturer datasheet.

Cotação Contato
ATSAMD20J17A-AU - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip
ATSAMD20J17A-AU

ATSAMD20J17A-AU - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip

The Microchip Technology ATSAMD20J17A-AU is a 32-bit ARM Cortex-M0+ based microcontroller (MCU) from the SAM D20 family, operating at up to 48 MHz with 128 KB of Flash and 16 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. It integrates a Serial Communication Interface (SERCOM) module configurable as UART/USART/SPI/I2C, a 12-bit ADC, 10-bit DAC, and full-speed USB 2.0 device support. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on one silicon die. The Cortex-M0+ is the smallest, lowest-power ARM core, optimized for energy-efficient embedded designs. Within Microchip's portfolio, the SAM D20 family sits between the 8-bit PIC/AVR families and the higher-end Cortex-M4 SAM D5x/E5x families, balancing deterministic real-time performance with very low active and sleep current consumption. Key features of the ATSAMD20J17A-AU include the Cortex-M0+ core with single-cycle I/O access and hardware multiplier, the SERCOM peripheral block (six instances, each reconfigurable to multiple protocols), a 12-bit 350 ksps ADC with up to 20 channels, a 10-bit 350 ksps DAC, two analog comparators, and a Real-Time Clock (RTC) with calendar mode. The device supports 1.62 V to 3.63 V supply and six flexible low-power sleep modes (IDLE, STANDBY, BACKUP, OFF), achieving current consumption as low as a few microamperes in BACKUP mode with RTC running. Architecturally, the SAM D20 uses a single AHB-Lite bus matrix, a separate low-power APB bridge, and a Peripheral Event System that lets peripherals trigger one another without CPU involvement, reducing wake latency. The integrated Full-Speed USB 2.0 device controller with on-chip transceiver eliminates the need for an external PHY, simplifying USB-equipped designs. The 128 KB Flash is ECC-protected and supports in-application programming (IAP) through the bootloader ROM. Typical applications include low-power IoT sensor nodes, smart home and home automation devices, consumer electronics (wearables, toys, appliances), industrial metering and HVAC controllers, and human-machine interface (HMI) modules. The combination of USB, ADC, DAC, and flexible SERCOM makes it well-suited as a single-chip solution for tethered peripherals, small appliances, and connected sensor hubs. When designing with the ATSAMD20J17A-AU, pay close attention to decoupling (place a 100 nF X7R plus 4.7 uF bulk capacitor close to VDDIN and VDDIO), provide a stable VDDCORE voltage using the internal regulator, and route the 48 MHz crystal traces symmetrically with a ground guard ring for low-EMI performance. Microchip's Atmel Studio 7 / MPLAB X IDE with the START code configurator shortens firmware development time significantly. This page synthesizes distributor pricing, drop-in alternatives from Microchip's SAM D20 and SAM D21 families, and practical design notes not found in the standalone manufacturer datasheet.

Cotação Contato
ATSAMD20J17A-AUT - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip
ATSAMD20J17A-AUT

ATSAMD20J17A-AUT - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip

The Microchip Technology ATSAMD20J17A-AUT is an ARM Cortex-M0+ based 32-bit microcontroller from the SAM D20J family, delivering 48MHz CPU performance with 128KB Flash and 16KB SRAM in a 64-pin TQFP (10x10mm) package with exposed pad. It integrates a 12-bit ADC, 10-bit DAC, 256-channel Peripheral Touch Controller (PTC), and a full-speed USB 2.0 device interface, all while consuming low active and sleep currents typical of the SAM D20 family. What is a Cortex-M0+ microcontroller? It is a 32-bit ARM processor core optimized for the smallest die size, lowest power, and simplest programmer's model in the ARMv6-M architecture family. The Cortex-M0+ sits below Cortex-M3/M4/M7 in performance and above 8-bit legacy cores like 8051 and AVR in capability, and is widely used in cost-sensitive IoT, sensor hubs, and battery-powered consumer devices. Microcontrollers of this class integrate flash, SRAM, peripherals, and a voltage regulator into a single chip, removing the need for an external memory bus. Key features of the ATSAMD20J17A-AUT include: up to 48MHz operation from a 1.62V to 3.63V supply, six SERCOM (serial communication) interfaces that can each be configured as UART, SPI, or I2C, a 12-bit 350ksps ADC with up to 20 channels, a 10-bit 350ksps DAC, six 16-bit timer/counters, a Real-Time Clock (RTC), and full-speed USB device with on-chip transceiver. The integrated Peripheral Touch Controller supports button, slider, and wheel capacitive touch sensing without external ICs, which is unusual for MCUs in this price bracket. The device uses a single 32.768kHz crystal or internal 32kHz oscillator for low-power RTC operation, an 8MHz internal oscillator as the default system clock source, and offers multiple low-power modes (IDLE, STANDBY, BACKUP) where quiescent current drops below a few microamps. The Event System and Peripheral Event Controller allow peripherals to trigger each other without CPU intervention, enabling deterministic low-latency response and CPU-offload. Typical applications include home automation nodes, smart metering endpoints, industrial sensor transmitters, consumer wearables, USB HID/CDC devices, and capacitive touch user interfaces. The exposed thermal pad on the 64-TQFP provides a low-impedance ground bond for higher-current USB and ADC designs, while the wide supply range supports both 3.3V and 1.8V system rails. Design consideration: when using the ADC, place a 100nF decoupling capacitor adjacent to each ADC channel pin and route analog traces away from switching nodes. For USB applications, the on-chip pull-up resistor on D+ must be enabled in firmware, and the 48MHz system clock must be locked to the DFLL or a crystal reference to meet USB timing tolerance. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and design considerations not found in the manufacturer datasheet alone, providing engineers a single reference for component evaluation.

Cotação Contato
ATSAMD20J17A-CN - ARM Cortex-M0+ 48MHz MCU 128KB Flash | Microchip
ATSAMD20J17A-CN

ATSAMD20J17A-CN - ARM Cortex-M0+ 48MHz MCU 128KB Flash | Microchip

The Microchip ATSAMD20J17A-CN is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20J family, delivering up to 48 MHz CPU clock speed with 128 KB of Flash program memory and 16 KB of SRAM, housed in a 64-ball UFBGA (5x5 mm) surface-mount package. Operating from 1.62 V to 3.6 V, the device integrates a 12-bit ADC, 10-bit DAC, 256-channel peripheral touch controller (PTC), and a full set of serial interfaces including I2C, SPI, and UART/USART. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as timers, ADCs, and communication interfaces. The SAM D20J family sits within Microchip's broader portfolio of ARM Cortex-M based microcontrollers > 32-bit MCUs > embedded processors, targeting low-power, high-performance applications. The Cortex-M0+ core is the smallest and most energy-efficient ARM processor, optimized for deterministic interrupt response and minimal active/idle current. Key features include the SAM D20J's signature low-power architecture with multiple sleep modes and a power consumption profile below 100 uA/MHz active, integrated 12-bit 1 MSPS ADC with up to 16 channels, a 10-bit DAC for analog signal generation, and a 256-channel peripheral touch controller for capacitive user interfaces. The device includes a 32-bit RTC, six SERCOM modules configurable as USART/SPI/TWI, six 16-bit timers/counters, and a full-speed USB 2.0 device interface. Architecturally, the ATSAMD20J17A-CN uses Microchip's event system for hardware-level peripheral interconnect without CPU intervention, reducing latency and current consumption. The Cortex-M0+ core implements ARMv6-M Thumb/Thumb-2 instruction set, NVIC for interrupts, and a single-cycle hardware multiplier. The integrated voltage regulator, brown-out detector, and POR circuit ensure robust operation across the full 1.62-3.6 V range. Typical applications include home automation gateways, consumer electronics, smart metering, IoT sensor nodes, and industrial control peripherals such as HMI panels and motor drive signal conditioning. The wide voltage range and low-power sleep modes specifically target battery-powered edge devices. When designing with this device, evaluate power budget carefully: the integrated voltage regulator consumes a quiescent current even in standby, so for sub-1 uA sleep applications, consider the SAML21 family instead. Choose the UFBGA-64 package only when board space is critical; otherwise the QFN-64 variant improves thermal performance and reworkability. This page synthesizes distributor pricing, drop-in SAM D20J family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
ATSAMD20J17A-CNT - ARM Cortex-M0+ 48MHz MCU 128KB Flash | Microchip
ATSAMD20J17A-CNT

ATSAMD20J17A-CNT - ARM Cortex-M0+ 48MHz MCU 128KB Flash | Microchip

The Microchip ATSAMD20J17A-CNT is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20J family, operating at up to 48 MHz with 128 KB of Flash program memory and 16 KB of SRAM, housed in a 64-ball UFBGA (5x5 mm) package. What is a Cortex-M0+ microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals. The ARM Cortex-M0+ is the most energy-efficient member of the ARM Cortex-M family, designed for low-power embedded applications while providing Thumb-2 instruction-set efficiency and a deterministic nested-vector interrupt controller (NVIC). The ATSAMD20 sits in the hierarchy MCU -> microcontroller -> ARM Cortex-M0+ -> SAM D20 family -> semiconductor, and is purpose-built for always-on and battery-powered products. Key features include up to 48 MHz core clock, 128 KB Flash, 16 KB SRAM, a 12-bit 1 Msps SAR ADC, a 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC), SERCOM-configurable serial interfaces (I2C, SPI, UART), full-speed USB 2.0 device, a Real-Time Clock (RTC), and a 16-bit Event System. The part operates from 1.62 V to 3.63 V across an industrial -40C to +105C temperature range. The ATSAMD20J17A-CNT uses Microchip's proprietary low-power technology with multiple Sleep, Standby, and Backup modes and an integrated 8 MHz DFLL (Digital Frequency Locked Loop) that can be referenced against a 32.768 kHz crystal, eliminating the need for an external high-frequency oscillator in most designs. Typical applications include home automation, smart metering, consumer electronics, industrial sensor nodes, low-power wireless platforms, capacitive-touch user interfaces, and small USB peripherals. The 64-ball UFBGA package is well-suited to compact handheld designs where board area is at a premium. Design consideration: route the SERCOM pins carefully and assign peripheral functions during firmware configuration, since SERCOM modules are multiplexed to multiple pin positions. Decouple VDD and VDDCORE with at least one 100 nF X7R ceramic capacitor placed within 3 mm of each supply pin. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, enabling faster BOM selection and design-in decisions.

Cotação Contato
ATSAMD20J17A-CU - 128KB Flash Cortex-M0+ MCU | Microchip
ATSAMD20J17A-CU

ATSAMD20J17A-CU - 128KB Flash Cortex-M0+ MCU | Microchip

The Microchip ATSAMD20J17A-CU is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20 family, offering 128KB of Flash and 16KB of SRAM, packaged in a 64-ball UFBGA (5x5 mm). It supports a maximum CPU clock of 48 MHz delivering 2.14 CoreMark/MHz, with an operating voltage range of 1.6V to 3.6V and an industrial-grade temperature range up to +85C. A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, peripherals, and I/O on a single die. The Cortex-M0+ class is the most area- and cost-optimized ARM core, designed for energy-efficient embedded applications while retaining the ARM Thumb-2 instruction set and a full Cortex-M ecosystem (CMSIS, vendor toolchains). Microcontrollers sit at the bottom of the embedded hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. Key features include up to 52 programmable I/O pins, a 12-bit ADC with up to 20 channels, a 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC), an RTC with calendar mode, full-speed USB device, SERCOM serial interfaces (up to 6), and an Event System for hardware inter-peripheral signaling. The device also integrates an 8-channel DMA, brown-out detection, and multiple sleep modes for low-power operation. The SAM D20 architecture pairs an ARM Cortex-M0+ core (single-cycle multiplier, NVIC) with a multi-layer AHB/APB bus matrix, allowing deterministic peripheral access. Microchip's Atmel Studio/Microchip Studio and ASF/MPLAB Harmony frameworks, plus SEGGER J-Link support, give the part a mature firmware ecosystem. Sleep currents in the microamp range make it well suited for battery-powered designs. Typical applications include home automation, consumer electronics, smart metering, industrial control nodes, and low-power wireless sensor hubs. The 64-ball BGA package enables compact board layouts for wearables and IoT end nodes. When designing with this part, confirm PCB land pattern compatibility for the 5x5 mm 64-ball UFBGA and verify decoupling per the SAM D20 datasheet. Use a 32.768 kHz crystal only if RTC accuracy requires it; otherwise the internal 48 MHz DFLL is sufficient. Configure unused I/O as outputs with low state to minimize leakage. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
ATSAMD20J17A-CUT - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip
ATSAMD20J17A-CUT

ATSAMD20J17A-CUT - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip

The Microchip Technology (formerly Atmel) ATSAMD20J17A-CUT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20J family with 128 KB Flash, 16 KB SRAM, and a maximum CPU clock of 48 MHz, packaged in a 64-ball UFBGA (5x5 mm). It operates from 1.62 V to 3.63 V and is rated for the industrial temperature range of -40C to +85C, suiting industrial, metering, home automation, and consumer applications. The part suffix CUT denotes a 64-UFBGA industrial-grade Tape & Reel variant. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADC, timers, communication interfaces, GPIO). The SAM D20 family sits inside the broader hierarchy of ARM Cortex-M0+ based microcontrollers -> 32-bit microcontrollers -> microcontrollers -> integrated circuits -> semiconductors. By using the Cortex-M0+ core, the ATSAMD20J17A-CUT delivers 2.14 CoreMark/MHz while preserving the energy efficiency required for battery-powered end nodes. Key features include the Cortex-M0+ core with single-cycle I/O access, a 12-bit 350 ksps ADC, a 10-bit DAC, up to 6 SERCOM serial communication interfaces, a 24-channel event system, a Real-Time Clock (RTC), and a 256-channel Peripheral Touch Controller (PTC). The device also integrates an 8-channel DMA, a 32-bit hardware divider, and an on-chip 32 kHz RTC oscillator with PLL for the 48 MHz system clock. Sleep current is in the microampere range, with multiple low-power modes (IDLE, STANDBY, BACKUP) selectable per peripheral. The 64-UFBGA package supports up to 52 GPIO with 5 V tolerant inputs on most pins, plus dedicated I/O for USB, I2C, SPI, and UART through the flexible SERCOM peripheral. The 5x5 mm BGA footprint is intended for space-constrained designs where a QFP would be too large but the application still requires substantial memory and peripheral counts. The device is fully supported by Microchip/Atmel Studio, MPLAB X IDE, and Atmel START code-generator, with a free ASF (Atmel Software Framework) and Harmony 3 drivers. Typical applications include low-power IoT sensor nodes, smart meters, home automation gateways, industrial control, human-machine interface (HMI), and consumer wearables. The wide supply range and integrated 12-bit ADC also make it a strong fit for battery monitoring and analog front-end (AFE) interfaces. When designing with this part, ensure the four required decoupling capacitors (one 100 nF per VDD pin group) are placed as close as possible to the IC. For low-power RTC backup from a coin cell, route VBAT through a decoupling network and tie the XIN/XOUT 32.768 kHz crystal traces with short, guarded routing to minimize load capacitance error. This page synthesizes distributor pricing, drop-in package-compatible alternatives from the same SAM D20 family, and practical design notes not found in the manufacturer datasheet alone, giving procurement and engineering teams a single reference for sourcing decisions.

Cotação Contato
ATSAMD20J17A-MNT - ARM Cortex-M0+ MCU 128KB Flash 64-QFN | Microchip
ATSAMD20J17A-MNT

ATSAMD20J17A-MNT - ARM Cortex-M0+ MCU 128KB Flash 64-QFN | Microchip

The Microchip ATSAMD20J17A-MNT is a 32-bit ARM Cortex-M0+ flash MCU from the SAM D20J family, integrating 128KB of Flash and 16KB of SRAM, operating up to 48MHz, and housed in a 64-pin QFN (9x9 mm) package with an exposed thermal pad. The device runs from a 1.62V to 3.6V supply, supporting the typical 1.8V, 2.5V, and 3.3V rails common in low-power embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals such as ADC, DAC, timers, communication interfaces, and GPIO. The Cortex-M0+ is ARM's smallest and most energy-efficient core, designed for deterministic real-time response at very low active and sleep currents, which positions the SAM D20 family at the bottom of the ARM Cortex-M hierarchy (Cortex-M0+ -> Cortex-M0 -> Cortex-M3/M4 -> Cortex-M7) within the broader embedded microcontroller taxonomy (microcontroller -> semiconductor -> integrated circuit). Key features of the ATSAMD20J17A-MNT include the SAM D20J peripheral set: a 12-bit ADC up to 1 MSPS with up to 20 channels, a 10-bit 350 kSPS DAC, six SERCOM (serial communication) channels configurable as UART, SPI, or I2C, a 24-bit timer/counter for control, an RTC with calendar mode, and a 256-channel Peripheral Touch Controller (PTC) supporting capacitive touch buttons, sliders, and proximity sensing without external components. Architecturally, the device uses a single-cycle hardware multiplier, NVIC with 4 priority levels, and a low-power SleepWalking peripheral event system that allows peripherals to wake the CPU only when meaningful work is needed. The 2.14 CoreMark/MHz efficiency reflects the Cortex-M0+ Thumb-2 instruction set tuned for code density and deterministic interrupt latency under 12 cycles. Typical applications include home automation nodes, smart metering, low-power wireless sensor hubs, consumer electronics HMI with capacitive touch, industrial sensor transmitters, and battery-powered IoT endpoints where sleep current in the microampere range is critical. The wide 1.62V to 3.6V supply range lets it run directly from a single lithium coin cell or a 2xAA alkaline pack. When designing with this part, pay attention to decoupling: place a 100nF X7R ceramic on each VDD pin and a bulk 4.7uF near the package, route the exposed pad (EP) to a continuous ground copper pour with at least 4 thermal vias to the inner ground plane for low-impedance thermal and electrical return. Configure unused pins as outputs with low state or enable the internal pull-down to minimize leakage in battery-powered designs.

Cotação Contato
ATSAMD20J18A-AU - ARM Cortex-M0+ MCU, 256KB Flash | Microchip
ATSAMD20J18A-AU

ATSAMD20J18A-AU - ARM Cortex-M0+ MCU, 256KB Flash | Microchip

The Microchip Technology ATSAMD20J18A-AU is an ARM Cortex-M0+ based 32-bit flash microcontroller delivering 256KB of flash and 32KB of SRAM in a 64-pin LQFP package, running at up to 48 MHz. It targets low-power, high-performance home automation, consumer, metering, and industrial applications with a wide operating voltage range and a rich peripheral set including up to 52 programmable I/O pins. An ARM Cortex-M0+ microcontroller is a 32-bit processor core implementing the ARMv6-M architecture (Thumb/Thumb-2 instruction set), optimized for energy-efficient embedded computing. Cortex-M0+ sits at the low-power end of the Cortex-M family above M0L/M23 and below M3/M4/M7, and integrates tightly with on-chip flash, SRAM, and peripherals to form a system-on-chip (SoC) within the broader microcontroller and embedded processing hierarchy. Key features include a 12-bit ADC up to 200 ksps, 10-bit DAC, up to 8 SERCOM interfaces that can each be configured as UART, SPI, I2C, or LIN, a 24-bit timer/counter, RTC, full-speed USB device, and 2.4mA/MHz active current with multiple Sleep, Standby, and Backup sleep modes that drop consumption into the microamp range. Six SERCOM channels, six timer/counters, and an I2S interface provide flexible connectivity for sensors, displays, and communications. Technically, the device integrates a single-cycle multiplier, 4KB cache, and a 2-channel DMA engine for low-overhead peripheral transfers. The architecture is well documented in the SAM D20 family datasheet and is supported by Microchip's MPLAB X IDE, ASF, and Atmel Studio 7 toolchains, with a choice of GCC or IAR compilers. A built-in 32.768 kHz oscillator and an on-chip PLL simplify clocking for USB and high-speed peripherals. Typical applications include home-automation gateways, smart energy metering, industrial sensor nodes, consumer HMI controls, low-power wireless sensor nodes, and USB human-interface devices. The wide 1.62V to 3.6V supply range and ultra-low-power Sleep modes also support battery-powered IoT endpoints. When designing with this device, ensure that the decoupling network (typically 100nF plus 4.7uF bulk) is placed within a few millimeters of the VDD pins, and that PA24/PA25 (USB) and PA22/PA23 are configured correctly for full-speed USB if the D+ pull-up is needed. Pay attention to the SERCOM pin-mux table: each SERCOM can be mapped to several I/O pins, but only one mapping at a time is active. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that are not always assembled in a single location elsewhere.

Cotação Contato
ATSAMD20J18A-AUES - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip
ATSAMD20J18A-AUES

ATSAMD20J18A-AUES - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip

The Microchip Technology ATSAMD20J18A-AUES is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20J family, operating at up to 48 MHz with 256 KB of Flash and 32 KB of SRAM in a 64-pin TQFP (10x10 mm) exposed-pad package. It integrates a 12-bit ADC, 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC), and a full SERCOM peripheral set for flexible serial communication. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and peripherals. ARM Cortex-M0+ cores target low-power, deterministic embedded applications; the SAM D20J extends this with Microchip's peripheral ecosystem including Event System and SleepWalking. The device sits within the hierarchy: Cortex-M0+ MCU -> ARM Cortex-M microcontroller -> embedded MCU -> semiconductor. Key features include a 1.62 V to 3.6 V supply range, six SERCOM channels configurable as UART/SPI/I2C, USB device support via embedded FS USB, hardware CRC, a 32-bit Real-Time Clock with calendar, and low-power modes down to microamp standby current. The integrated PTC supports capacitive touch sensing without external components, while the 12-bit ADC delivers up to 300 ksps with up to 20 channels. The SAM D20J uses a Harvard-bus architecture with single-cycle IO and a 4-channel DMA controller that offloads CPU data movement. The Event System allows peripherals to trigger each other without CPU intervention, while SleepWalking peripherals wake the CPU only when needed, reducing average power in sensor-driven applications. Typical applications include home automation and IoT nodes, capacitive-touch human-machine interfaces, smart meters and sensor hubs, industrial control peripherals, and low-power wireless sensor platforms. The wide memory and rich peripheral mix allow consolidation of multiple functions into a single MCU. When designing with this device, allocate the 10x10 mm TQFP exposed pad properly to the ground plane for thermal and signal-integrity performance. Use Atmel/Microchip Studio with ASF or start.atmel.com (MCC) code generation to accelerate firmware development and SERCOM configuration. This page synthesizes distributor pricing, verified same-family drop-in alternatives, and PCB-level design notes not found in the manufacturer datasheet alone, helping engineers select and qualify the ATSAMD20J18A-AUES for production.

Cotação Contato
ATSAMD20J18A-AUT - ARM Cortex-M0+ 48MHz 256KB Flash MCU | Microchip
ATSAMD20J18A-AUT

ATSAMD20J18A-AUT - ARM Cortex-M0+ 48MHz 256KB Flash MCU | Microchip

The Microchip Technology ATSAMD20J18A-AUT is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20 family, delivering up to 48 MHz CPU clock speed, 256 KB of embedded Flash, and 32 KB of SRAM in a 64-pin LQFP (10x10 mm) package. The -AUT suffix indicates an industrial temperature grade (-40C to +85C) and Tape & Reel packaging for high-volume SMT assembly. Microcontrollers (MCUs) are programmable system-on-chip devices that integrate a processor core, volatile and non-volatile memory, and a rich peripheral set into a single package. The ARM Cortex-M0+ is one of the smallest and most energy-efficient 32-bit cores in the ARM family, designed for deterministic embedded control. The ATSAMD20J18A-AUT sits in the SAM D20 family, Microchip's mainstream low-power Cortex-M0+ MCU line, hierarchically positioned above 8-bit AVR/PIC devices and below Cortex-M4 parts such as the SAM D5x/E5x. Key features include the 2.14 CoreMark/MHz performance figure, a 6-channel SERCOM (configurable as UART, SPI, or I2C) interface, a 12-bit ADC, 10-bit DAC, and full-speed USB device capability on selected pins. The Event System, SleepWalking peripherals, and multiple low-power sleep modes allow the device to keep waking intelligently while consuming minimal current - well suited to battery-powered edge nodes. The architecture pairs a single-cycle hardware multiplier with a 4-channel direct memory access controller, enabling efficient peripheral-to-memory transfers without CPU intervention. The integrated high-speed 48 MHz on-chip oscillator (DFLL-fine locked to the internal 32 kHz source) provides factory-calibrated accuracy without an external crystal, lowering BOM cost. Typical applications include home automation nodes, smart metering endpoints, consumer wearables, building control sensors, and industrial sensor hubs. Within a system, the ATSAMD20J18A-AUT often acts as the main controller handling analogue signal conditioning, communication, and user-interface tasks. With its Cortex-M0+ ISA, code is portable to the wider SAM D / SAM C / SAM S family lineup with minimal rework. For designers, the most useful planning step is reserving 4 KB of Flash for a future bootloader, leaving adequate decoupling (100 nF + 1uF) close to each VDD pin, and confirming the chosen package variant's pin count (this is the 64-pin LQFP) against the I/O requirement before layout. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical engineering notes not found in the manufacturer datasheet alone.

Cotação Contato
ATSAMD20J18A-CN - ARM Cortex-M0+ MCU, 256KB Flash, 64-UFBGA
ATSAMD20J18A-CN

ATSAMD20J18A-CN - ARM Cortex-M0+ MCU, 256KB Flash, 64-UFBGA

The Microchip Technology ATSAMD20J18A-CN is a 32-bit ARM Cortex-M0+ flash microcontroller in the SAM D20 family, delivering up to 48 MHz CPU performance with 256 KB of Flash program memory and 32 KB of SRAM in a 64-pin UFBGA package. The device operates from 1.6 V to 3.6 V and supports both industrial (-40C to +105C) temperature grades, making it suitable for harsh-environment embedded designs. What is an ARM Cortex-M0+ microcontroller? An ARM Cortex-M0+ is an ultra-low-power 32-bit processor core designed by ARM Holdings, optimized for cost-sensitive embedded applications that require deterministic real-time behavior. It sits within the hierarchy of microcontroller categories: microcontroller -> 32-bit MCU -> ARM Cortex-M microcontroller -> Cortex-M0+ class, and within the SAM D20 product line it represents the entry point to Microchip's Cortex-M0+ portfolio. Key features of the ATSAMD20J18A-CN include the integrated Peripheral Touch Controller (PTC) supporting up to 256 channels for capacitive touch interfaces, a 12-bit ADC with up to 20 channels, a 10-bit DAC, SERCOM (serial communication) modules configurable as UART/SPI/I2C, and a full-speed USB 2.0 device interface. The Event System allows inter-peripheral signaling without CPU intervention, reducing software complexity and power consumption. The architecture uses single-cycle I/O access, hardware multiplier, and Microchip's proprietary SleepWalking technology for peripheral-level clock gating. The 48 MHz Cortex-M0+ core delivers 0.93 DMIPS/MHz, sufficient for sensor fusion, motor control, and HMI applications. Typical applications include home automation control panels, smart metering endpoints, consumer appliances with capacitive touch, industrial sensor hubs, and battery-powered IoT edge nodes. The combination of low active current (~3 mA at 48 MHz), multiple low-power sleep modes, and fast wake-up time makes it suitable for energy-harvesting designs. When designing with this part, evaluate decoupling strategy carefully: place one 100 nF X7R ceramic capacitor on each VDD/VDDIO pair as close to the IC as possible, and provide a 4.7 uF bulk capacitor on the main rail. Verify I/O bank voltage compatibility - all GPIO must reference the same VDDIO rail for the bank to operate correctly. This page synthesizes distributor pricing, drop-in alternatives from the same SAM D20 family, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
ATSAMD20J18A-CU - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip
ATSAMD20J18A-CU

ATSAMD20J18A-CU - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip

The Microchip ATSAMD20J18A-CU is a 32-bit ARM Cortex-M0+ flash microcontroller operating at up to 48 MHz, equipped with 256 KB of Flash and 32 KB of SRAM, housed in a 64-ball UFBGA (5x5 mm) package. It targets low-power, high-performance embedded applications in home automation, consumer, metering, and industrial segments, reaching up to 2.46 CoreMark/MHz while consuming as little as 70 uA/MHz active and sub-uA sleep currents. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on a single die. The Cortex-M0+ class of MCUs represents the most energy-efficient tier of the ARM Cortex-M family, optimized for deterministic interrupt-driven workloads and ultra-low standby power. Within Microchip's portfolio, the ATSAMD20J18 belongs to the SAM D20 family of microcontrollers, sitting in the broader category of 32-bit flash MCUs under the Microchip SMART ARM-based product line. The part is pin-compatible across the SAM D20 series, enabling identical PCB layouts for variants with differing Flash and SRAM sizes. Key features of the ATSAMD20J18A-CU include an integrated 12-bit ADC with up to 20 channels, a 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC), a full-speed USB 2.0 device interface, multiple SERCOM (serial communication) modules configurable as UART, SPI, or I2C, and a 32-bit Real-Time Clock (RTC). It also provides six 16-bit Timer/Counters, an Event System for inter-peripheral signaling without CPU intervention, and a comprehensive clock management unit with on-chip PLLs and oscillators. Architecturally, the ATSAMD20J18A-CU is built on a low-leakage CMOS process and integrates a high-performance 32-bit core with single-cycle I/O access, hardware multiply, and a Nested Vectored Interrupt Controller (NVIC). The 2.46 CoreMark/MHz figure confirms efficient Thumb-2 instruction execution, and the wide 1.62 V to 3.63 V operating range allows direct connection to single-cell Li-ion or 3.3 V regulated rails. Typical applications include low-power wireless sensor nodes, smart metering, home automation controllers, USB Human Interface Devices (HIDs), industrial control panels, and consumer electronics with capacitive touch user interfaces. The rich peripheral mix enables single-chip implementations of bridge, HMI, and data-acquisition products. Designers should plan for the SERCOM peripheral mapping during firmware architecture, since each SERCOM instance can be routed to a specific set of pads. Decoupling must include a 100 nF cap per VDD pin plus a bulk 4.7 uF capacitor placed close to the package. For USB applications, the DP/DM traces require 90 ohm differential impedance and a precision 1.0 uF USB transceiver bypass capacitor. This page synthesizes distributor pricing, drop-in alternatives within the SAM D20 family and from competing Cortex-M0+ families, and practical design notes that go beyond the manufacturer datasheet to accelerate your schematic capture and PCB layout decisions.

Cotação Contato
ATSAMD20J18A-MN - ARM Cortex-M0+ MCU 256KB Flash | Microchip
ATSAMD20J18A-MN

ATSAMD20J18A-MN - ARM Cortex-M0+ MCU 256KB Flash | Microchip

The Microchip Technology ATSAMD20J18A-MN is a 32-bit ARM Cortex-M0+ based flash microcontroller delivering up to 48 MHz CPU performance with 256 KB of Flash and 32 KB of SRAM, housed in a 64-pin QFN (HVQCCN) package. It operates across a wide 1.62 V to 3.63 V supply range and is specified for the industrial temperature range of -40 C to +105 C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as ADC, timers, communication interfaces, and GPIOs. The SAM D20 family sits within Microchip's broader portfolio of ARM Cortex-M based microcontrollers -> 32-bit microcontrollers -> microcontrollers -> semiconductors, and is purpose-built for low-power embedded designs. The Cortex-M0+ core delivers 2.14 CoreMark/MHz, balancing energy efficiency with deterministic real-time response. Key features include a 12-bit ADC with up to 16 channels and 350 ksps throughput, a 10-bit DAC, six SERCOM configurable serial interfaces (each usable as UART, I2C, or SPI), a 24-channel peripheral touch controller, and a full-speed USB 2.0 device port. The Event System and SleepWalking peripherals enable deterministic peripheral wake-up while the CPU remains dormant, allowing designers to meet aggressive power budgets. The architecture combines an ultra-low-power design (down to 8 uA/MHz active, sub-microamp deep sleep) with deterministic interrupt latency from the Cortex-M0+ Nested Vector Interrupt Controller (NVIC). Integrated AES-like crypto hardware and a true random number generator (TRNG) on selected variants strengthen secure connectivity. The 64-pin QFN package exposes up to 52 GPIOs enables two I2S channels and a full-speed USB PHY. Typical applications include home automation nodes, smart metering endpoints, consumer wearables, industrial sensor hubs, and IoT edge devices that need both low standby consumption and responsive real-time behavior. The wide supply range and industrial temperature grade also suit battery-powered or outdoor deployments. When designing with this device, ensure the QFN thermal pad is soldered to a sufficiently large copper pour to meet the 64-pin HVQCCN thermal envelope. The SAM D20's SERCOM multiplexing requires careful pin mapping via the PORT controller; refer to the device pinout table before committing PCB layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
ATSAMD20J18A-MNT - 48MHz Cortex-M0+ MCU, 256KB Flash, 64-QFN
ATSAMD20J18A-MNT

ATSAMD20J18A-MNT - 48MHz Cortex-M0+ MCU, 256KB Flash, 64-QFN

The Microchip Technology (formerly Atmel) ATSAMD20J18A-MNT is a 32-bit ARM Cortex-M0+ flash microcontroller delivering 48 MHz CPU performance with 256 KB of embedded Flash and 32 KB of SRAM, packaged in a 64-pin QFN (9x9 mm). It operates from 1.62 V to 3.63 V across an industrial temperature range of -40 °C to +105 °C and integrates peripherals including SERCOM (I²C/SPI/UART), 12-bit ADC, 10-bit DAC, 16-bit PWM timers, RTC, and a 256-channel peripheral touch controller (PTC) for capacitive sensing. A low-power, high-performance 32-bit microcontroller (MCU) is the foundation of modern embedded systems, combining a processor core, program memory, data memory, and analog/digital peripherals on a single silicon die. The Cortex-M0+ belongs to ARM's low-power microcontroller family, optimized for deterministic interrupt response and energy-efficient operation in always-on or battery-powered designs. MCUs like the SAM D20 sit hierarchically below microprocessors in complexity but above simple discrete logic in functionality, serving as the configurable decision-making brain of home appliances, sensor nodes, and industrial control boards. Key features include 2.14 CoreMark/MHz efficiency, six SERCOM channels configurable as I²C, SPI, or USART, a 12-bit 350 ksps ADC with up to 20 channels, a 10-bit 350 ksps DAC, two I²S interfaces, full-speed USB device support (note: ATSAMD20J parts do not include USB; that resides on the SAMD21), and a 24-channel event system for autonomous inter-peripheral signaling without CPU intervention. The integrated PTC provides up to 256 channels of hardware-accelerated capacitive touch sensing for buttons, sliders, and proximity detection. The SAM D20 uses a two-layer AHB-Lite bus matrix with separate bridges for Flash and SRAM, allowing 32-bit code execution from Flash with zero-wait-state prefetch buffering. The device includes Microchip's SleepWalking technology, which lets peripherals examine incoming data while the CPU remains in deep-sleep, waking only on qualifying events. Power profiles offer RUN, IDLE, STANDBY, BACKUP, and OFF modes, with typical active current of ~3 mA at 48 MHz and deep-sleep backup current under 4 µA with RTC running. Typical applications include home automation hubs and connected appliances, smart metering (electricity, gas, water), consumer electronics with touch interfaces, industrial sensor transmitters, low-cost LoRaWAN/BLE bridge nodes, and battery-powered IoT end devices. The wide operating voltage and industrial temperature range also suit automotive aftermarket and harsh-environment instrumentation. When designing with the ATSAMD20J18A-MNT, leverage the Atmel/Microchip START tool and ASFv6 (Atmel Software Framework) to generate peripheral drivers, FreeRTOS ports, and USB stacks. The 64-QFN variant omits USB pins (those are reserved on the bare die, and the J-package silicon only exposes them as GPIOs); specify ATSAMD20J18A-AU (LQFP64) if you require alternate pin remapping. Mind the 3-wire SWD interface: dedicate one TCK/TMS pad pair to programming rather than reusing them for application GPIOs. This page synthesizes distributor pricing (as of 2026-09-21), pin-compatible same-family drop-in alternatives such as ATSAMD21J18A and ATSAMD20J17A, and practical design notes not aggregated on any single manufacturer page.

Cotação Contato
ATSAMD20J18A-MU - SAM D20 Cortex-M0+ MCU, 256KB Flash | Microchip
ATSAMD20J18A-MU

ATSAMD20J18A-MU - SAM D20 Cortex-M0+ MCU, 256KB Flash | Microchip

The Microchip ATSAMD20J18A-MU is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20 family, delivering up to 48 MHz CPU clock, 256 KB of Flash and 32 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed pad. It integrates a 12-bit ADC, 10-bit DAC, 256-channel Peripheral Touch Controller (PTC), and a full set of serial interfaces including SERCOM, I2C, SPI and UART. The device operates from a 1.62 V to 3.6 V supply and reaches 2.14 CoreMark/MHz, making it a strong fit for low-power, mixed-signal embedded designs. A Cortex-M0+ microcontroller is the smallest and most energy-efficient core in the ARM Cortex-M family, designed for deterministic embedded control. Within the broader semiconductor hierarchy it sits inside the microcontroller category, itself a sub-class of microprocessors and ultimately of integrated circuits. The SAM D20 family specifically targets low-power applications, where deep-sleep current, fast wake-up and peripheral event system behaviour determine battery lifetime and are critical design parameters. Key differentiating features of the ATSAMD20J18A-MU include its Event System for CPU-independent peripheral interconnect, a 32-bit RTC with calendar mode, and a 12-bit 350 ksps ADC with up to 20 channels. The integrated PTC supports robust capacitive touch sensing up to 256 sensors without external ICs, while the SERCOM peripherals can be independently configured as USART, I2C or SPI, giving strong pin-out flexibility within the 64-pin footprint. The device leverages a single-cycle hardware multiplier, an MPU for memory protection, and a low-power Brown-Out Detector. Its SleepWalking capability lets peripherals wake the core only when meaningful data is available, enabling sub-microamp idle budgets while keeping analogue blocks ready. Internal voltage regulation keeps digital noise isolated from sensitive analogue domains. Typical applications include smart-home and building automation nodes, low-power wireless sensor hubs, consumer human-interface products using capacitive touch, motor control companion MCUs, smart lighting controllers, and metering/instrumentation endpoints. The wide 1.62 V-3.6 V supply range and onboard analogue make it equally suitable for battery-powered wearables and industrial 3.3 V backplanes. When designing with this part, prioritise decoupling close to all VDD pins, route the exposed pad to a continuous ground copper pour for thermal dissipation, and verify that the chosen SERCOM mapping matches your required pinout before PCB fabrication. Always consult the device datasheet for the latest errata, package land pattern and absolute maximum ratings. This page synthesizes distributor pricing, drop-in alternatives, application notes and design considerations beyond what is contained in the manufacturer datasheet alone.

Cotação Contato
ATSAMD21E15B-AFT - 48MHz Cortex-M0+ MCU, 32KB Flash | Microchip
ATSAMD21E15B-AFT

ATSAMD21E15B-AFT - 48MHz Cortex-M0+ MCU, 32KB Flash | Microchip

The Microchip Technology ATSAMD21E15B-AFT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21E family, running at 48 MHz with 32 KB of Flash and 4 KB of SRAM, housed in a 32-pin TQFP (7x7 mm) package. It is part of Microchip's Functional Safety (FuSa) line, designed for applications requiring IEC 60730 Class B safety compliance and low-power operation. The device operates from a single 1.62 V to 3.63 V supply and integrates a full-speed USB 2.0 device interface alongside multiple SERCOM peripherals, making it a compact solution for connected embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and configurable peripherals such as timers, communication interfaces, and ADCs. The Cortex-M0+ is the most energy-efficient member of the ARM Cortex-M family, optimized for deterministic real-time performance and ultra-low static power. The SAM D21 series sits within Microchip's broader portfolio of 8-bit PIC and 32-bit SAM ARM Cortex microcontrollers, targeting general-purpose, low-power, and connectivity-oriented designs across consumer, industrial, and IoT markets. Key features of the ATSAMD21E15B-AFT include six SERCOM serial communication modules configurable as UART, SPI, or I2C, a 14-channel 12-bit ADC with up to 350 ksamples/s, a 10-bit DAC, multiple 16-bit timer/counters, and an RTC, plus USB 2.0 Full-Speed device support. The FuSa variant adds hardware support for safety features such as dual-core self-test, watchdog, and CRC modules that simplify IEC 60730 Class B certification. Sleep current is in the microamp range and full-power operation is gated by an efficient on-chip voltage regulator. Architecturally, the device combines an ARM Cortex-M0+ core with a single-cycle hardware multiplier, Microchip's proprietary event system for deterministic peripheral signalling without CPU wake-up, and the Peripheral Touch Controller for capacitive sensing. The integrated Full-Speed USB PHY removes the need for external transceivers, and the SERCOM modules can be remapped to multiple pin positions to ease PCB routing. Typical applications include USB HID peripherals, home appliance control boards subject to IEC 60730 safety requirements, low-power wireless sensor nodes, capacitive touch user interfaces, and small industrial control modules. The wide 1.62-3.63 V supply range also makes the part suitable for 1S Li-ion battery-powered products. When designing with the ATSAMD21E15B-AFT, ensure the VDDCORE pin is decoupled with a 1 uF ceramic capacitor and that VDDIO and VDDIN share a clean rail. The part's FuSa documentation package (DS60001673) provides the self-test library and safety manual needed to claim Class B compliance. Migration between ATSAMD20 and ATSAMD21 parts is generally straightforward, but USB-equipped applications must verify the SAMD21 variant has the integrated PHY enabled. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone manufacturer datasheet.

Cotação Contato
ATSAMD21E15B-AU - 32KB Flash ARM Cortex-M0+ MCU | Microchip
ATSAMD21E15B-AU

ATSAMD21E15B-AU - 32KB Flash ARM Cortex-M0+ MCU | Microchip

The Microchip Technology ATSAMD21E15B-AU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21 family, integrating 32KB Flash and 4KB SRAM in a 32-pin TQFP package. It operates at up to 48 MHz and is powered from a 3.3V nominal supply (1.62V-3.6V range). The device targets general-purpose embedded applications requiring low power consumption and rich peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals. Within the broader semiconductor hierarchy, the ATSAMD21E15B-AU belongs to the ARM Cortex-M0+ class of microcontrollers, which are designed for energy-efficient 32-bit computing in cost-sensitive applications. The SAM D21 series extends Cortex-M0+ with Microchip's Event System, SERCOM peripherals, and full-speed USB support on selected variants. Key differentiating features include a 12-channel 350 µs minimum sample time 12-bit ADC, up to 26 GPIO lines, and six SERCOM interfaces that can each be configured as UART, I²C, or SPI. The integrated Event System allows peripherals to communicate without CPU intervention, reducing active time and current draw. SleepWalking peripherals continue to monitor external events while the CPU sleeps, achieving standby currents measured in microamperes. Architecturally, the ATSAMD21E15B-AU uses a single-cycle hardware multiplier and a Nested Vector Interrupt Controller (NVIC) to deliver deterministic interrupt response. The advanced analog peripherals, including a 10-bit DAC and two analog comparators, make it suitable for sensor signal conditioning. The on-chip Full-Speed USB 2.0 device interface (selected variants) simplifies connectivity for hardware peripherals. Typical applications include IoT sensor nodes, home automation controllers, wearable fitness bands, USB human-interface devices, and industrial control subsystems. The combination of low power, USB connectivity, and capacitive touch support makes it popular in consumer electronics and connected home products. When designing with this MCU, allocate sufficient decoupling capacitance near each VDD pin and route the SWD signals (SWDIO/SWDCLK) as short as possible for reliable debug. The on-chip 32.768 kHz oscillator should be configured for low-power RTC modes. Verify the specific variant's peripheral count against your BOM requirements.

Cotação Contato
ATSAMD21E15B-AUT - 32KB Flash Cortex-M0+ MCU, 32-TQFP | Microchip
ATSAMD21E15B-AUT

ATSAMD21E15B-AUT - 32KB Flash Cortex-M0+ MCU, 32-TQFP | Microchip

The Microchip Technology ATSAMD21E15B-AUT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21E family, featuring 32 KB of Flash, 4 KB of SRAM, and a 48 MHz CPU clock, housed in a 32-pin TQFP (7x7 mm) package supplied on Tape & Reel. Operating from 1.62 V to 3.63 V, the part integrates a 6-channel SERCOM, 10-bit ADC, 10-bit DAC, and a full-speed USB 2.0 Device/Host interface, making it one of the most feature-dense Cortex-M0+ parts in its pin-count class. The "AUT" suffix indicates the industrial temperature grade (-40C to +85C) in T&R packaging. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, and integrated peripherals. The ARM Cortex-M0+ is a 32-bit processor core optimized for energy efficiency and deterministic interrupt response, commonly used in battery-powered IoT, sensor, and human-machine interface applications. The SAM D21 family extends this with Microchip's proprietary peripherals (SERCOM, Event System, TCC) that allow peripheral multiplexing across almost every GPIO. Key differentiating features include a hardware Divide Square Root Accelerator (DIVAS), a SleepWalking peripheral event system that wakes the CPU only when necessary, and a 5-channel Direct Memory Access controller. According to the SAM D21 datasheet (40001882A), the device consumes 70 uA/MHz in Active mode and drops to under 5 uA in Sleep mode with full RAM retention, enabling multi-year battery life on coin-cell powered designs. Architecture-wise, the SAM D21 uses a 2-layer AHB/APB bus matrix with tightly-coupled SRAM, providing deterministic single-cycle access for the Cortex-M0+ core. The integrated Full-Speed USB 2.0 transceiver eliminates the need for an external PHY, and the 12-channel Event System allows peripherals to communicate without CPU intervention, freeing the core for application logic. The 6 SERCOM blocks can each be configured as UART, SPI, or I2C, giving 18 logical communication channels in total. Typical applications include USB human-interface devices, low-power wireless sensor nodes, industrial control modules, and consumer electronics such as remote controls and smart-home hubs. The device's combination of USB, ADC, DAC, and rich peripherals in a compact 32-pin package suits designs that previously required multiple external components. When designing with this part, ensure the 1.62 V minimum supply is respected during DC-DC converter startup, and place the VDDCORE decoupling capacitor close to pin 5 to minimize core-rail transients. Configure unused pins as analog inputs to minimize digital switching current in power-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

Cotação Contato
ATSAMD21E15B-MFT - 48MHz ARM Cortex-M0+ MCU, 32KB Flash | Microchip
ATSAMD21E15B-MFT

ATSAMD21E15B-MFT - 48MHz ARM Cortex-M0+ MCU, 32KB Flash | Microchip

The Microchip Technology ATSAMD21E15B-MFT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21E family with 32KB Flash, 4KB SRAM, and operation up to 48MHz, housed in a 32-pin VQFN (5x5 mm) package. The device integrates a single-cycle hardware multiplier, Micro Trace Buffer, and full peripheral set including SERCOM, 12-bit ADC, and USB, in a compact footprint targeted at space-constrained designs. What is a microcontroller? A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and programmable I/O peripherals. MCUs are the foundation of embedded systems, executing deterministic firmware for sensor reading, motor control, communication bridging, and user interface tasks. The SAM D21E family is positioned within Microchip's low-power ARM Cortex-M0+ portfolio, optimized for battery-powered IoT, consumer, and industrial sensing applications with sub-microamp sleep currents and a wide 1.62V-3.63V operating range. Key features include 32KB in-system self-programmable Flash with signature row and user row, 4KB SRAM, a 12-channel 12-bit 350ksps ADC, six SERCOM modules (each configurable as UART/SPI/I2C), one USB 2.0 Full-Speed device/host with on-chip transceiver, and a 24-channel event system for CPU-independent peripheral-to-peripheral signaling. The device includes a 6-channel DMA controller, two I2S/SSC interfaces, RTC with calendar, and crypto/hash engines (AES, SHA, True Random Number Generator). Architecturally, the SAM D21E implements the Cortex-M0+ v6-M profile with a Von Neumann bus to Flash and SRAM, single-cycle 32-bit ALU, and 4KB flash cache/branch cache that boosts effective throughput to 2.46 CoreMark/MHz. The integrated SleepWalking peripheral logic allows communication interfaces and timers to wake selected logic without waking the CPU. This event-driven architecture achieves measurable energy savings versus poll-based designs in always-on duty-cycled applications. Typical applications include wearables and fitness bands, low-power wireless sensor nodes (BLE, LoRa, sub-GHz), USB HID peripherals, smart home sensor hubs, industrial control panels, and battery-operated data loggers requiring sub-1uA sleep states and rapid wake-to-active transitions. The AEC-Q100 qualification makes the automotive-grade revision suitable for dashboard clusters and body controllers. When designing with this device, ensure proper decoupling with a 100nF ceramic capacitor close to each VDD pin and a 4.7uF bulk capacitor near the regulator output. Configure unused pins as inputs with enabled pull-ups to avoid floating leakage; unused pins configured as outputs risk injecting noise into analog rails.

Cotação Contato
ATSAMD21E15C-UUT - 32KB Flash Cortex-M0+ MCU WLCSP-35 | Microchip
ATSAMD21E15C-UUT

ATSAMD21E15C-UUT - 32KB Flash Cortex-M0+ MCU WLCSP-35 | Microchip

The Microchip Technology ATSAMD21E15C-UUT is a 32-bit ARM Cortex-M0+ microcontroller in a 35-ball WLCSP package, integrating 32KB in-system self-programmable Flash and 4KB SRAM. Operating at up to 48MHz with a single-cycle hardware multiplier and Micro Trace Buffer, the device targets low-power, general-purpose embedded designs where board space is at a premium. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory, data memory, and peripheral interfaces on a single silicon die. Within the broader semiconductor taxonomy, an MCU sits beneath the system-on-chip (SoC) hierarchy and above general-purpose microprocessors. The ARM Cortex-M0+ is an ultra-low-power 32-bit core optimized for deterministic interrupt response and minimal active/idle energy, making it ideal for battery-powered sensor nodes and human-interface devices. The SAMD21 family is positioned as the mainstream general-purpose line that drops in to SAM D20 sockets while adding richer analog and richer PWM. Key features include an ARM Cortex-M0+ core at 48MHz, 32KB Flash, 4KB SRAM, a 12-channel Direct Memory Access Controller (DMAC), a 12-channel Event System for inter-peripheral signalling without CPU intervention, Idle and standby sleep modes plus SleepWalking peripherals, a two-pin Serial Wire Debug (SWD) interface, and a one non-maskable interrupt. The device supports an operating voltage of 1.62V to 3.63V and a 32-pin count equivalent in this WLCSP-35 footprint variant. Architecturally the ATSAMD21E15C leverages an advanced analog front-end with 12-bit ADC and DAC, configurable timer/counter blocks (TC), and SERCOM serial engines that can be mapped to I2C, SPI, or UART on demand. The integrated Power-on Reset (POR) and brown-out detection ensure deterministic startup, while SleepWalking peripherals enable the device to wake on peripheral events without fully waking the CPU. Typical applications include wearables and fitness bands, low-power wireless sensor nodes (when paired with an external radio), USB human-interface devices, IoT edge nodes, smart-home controllers, and compact consumer products requiring small footprint. The 35-ball WLCSP package enables designs under 25 mm². When designing with this part, ensure the WLCSP-35 footprint matches PCB pad geometry and that the device is rated for the 85°C operating temperature indicated by the UUT suffix. The WLCSP package typically requires underfill or careful mechanical mounting for harsh-vibration environments. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
ATSAMD21E15L-AF - 48MHz Cortex-M0+ MCU 32KB Flash | Microchip
ATSAMD21E15L-AF

ATSAMD21E15L-AF - 48MHz Cortex-M0+ MCU 32KB Flash | Microchip

The Microchip Technology ATSAMD21E15L-AF is an ARM Cortex-M0+ based 32-bit Flash microcontroller (MCU) from the SAM D21E family, operating at up to 48 MHz with 32 KB of Flash and 4 KB of SRAM in a 32-pin TQFP (7x7 mm) package. It supports a 1.62 V to 3.63 V supply range, integrates a 12-bit ADC, 10-bit DAC, and multiple SERCOM channels, and is engineered for low-power control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripherals including timers, communication interfaces, and analog blocks. Within the broader taxonomy, the ATSAMD21E15L-AF sits in the Cortex-M0+ sub-family, which is the most energy-efficient member of the ARM Cortex-M processor family, optimized for deterministic embedded control in cost-sensitive, low-power products. The SAM D21 family further extends this with Microchip's peripheral mix and the Atmel/Microchip ecosystem (MPLAB X IDE, ASF, Harmony), making it a popular drop-in upgrade path from older AVR designs. Key features of the ATSAMD21E15L-AF include a maximum CPU clock of 48 MHz, full-speed USB 2.0 device support, up to six SERCOM channels configurable as UART/SPI/I2C, a 12-bit 350 ksps ADC with up to 14 channels, a 10-bit 350 ksps DAC, multiple PWM-capable timers (TCC/TC), and an event system for inter-peripheral signaling without CPU intervention. Functional Safety (FuSa) features and a built-in 32 kHz oscillator support deterministic real-time operation. Architecturally, the device combines a Cortex-M0+ core with a multi-layer bus matrix, low-power SleepWalking peripherals, and Microchip's proprietary peripheral touch controller for capacitive sensing. The wide supply range (1.62 V to 3.63 V) enables direct operation from a single Li-ion cell or 3.3 V regulated rail, while the integrated USB transceiver removes the need for an external crystal or PHY for many low-speed USB device applications. Typical applications include LED lighting controllers, low-voltage motor control, industrial sensor hubs, USB human-interface devices (HIDs), consumer wearables, and battery-powered IoT endpoints. The combination of USB device, 12-bit ADC, and PWM timers makes it a strong fit for closed-loop lighting and motor control where deterministic PWM timing is required. When designing with this part, observe the 48 MHz maximum clock, derate ADC inputs below 1.62 V, and verify USB D+/D- routing per the USB 2.0 specification. The 32-pin TQFP is footprint-compatible with other SAM D20E/SAM D21E family members, simplifying migration between Flash sizes. This page synthesizes distributor pricing, drop-in alternatives, application examples, and practical design notes not found in the manufacturer datasheet, accelerating component selection for embedded engineers.

Cotação Contato
ATSAMD21E15L-AFT - 48MHz Cortex-M0+ MCU, 32KB Flash | Microchip
ATSAMD21E15L-AFT

ATSAMD21E15L-AFT - 48MHz Cortex-M0+ MCU, 32KB Flash | Microchip

The Microchip ATSAMD21E15L-AFT is a 32-bit ARM Cortex-M0+ based Flash microcontroller delivering 48MHz CPU performance with 32KB of Flash memory and 4KB of SRAM, housed in a 32-pin TQFP (7x7 mm) package. It integrates a rich peripheral set including a 12-bit ADC, DAC, multiple SERCOM interfaces, and a 6-channel PWM timer that suit low-power, control-oriented embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and peripheral interfaces such as ADC, timers, and communication blocks into one package. The SAM D21 family from Microchip sits within the hierarchy: Cortex-M0+ core -> ARM Cortex-M family -> 32-bit RISC MCU -> microcontroller -> embedded processor -> semiconductor. This taxonomic context helps position the part within the broader embedded-systems landscape and supports accurate AI knowledge-graph retrieval. Key features include an operating voltage range of 1.6V to 3.6V, AEC-Q100 qualification for automotive environments, an extended -40C to +125C temperature range, and Microchip's Functional Safety (FuSa) documentation support for safety-critical designs. The device also includes a full-speed USB 2.0 interface, multiple SERCOM blocks configurable as UART/SPI/I2C, a 12-bit 350ksps ADC, a 10-bit 350ksps DAC, and on-chip touch support via the Peripheral Touch Controller (PTC). The ATSAMD21E15L-AFT is engineered for low-power operation, supporting multiple Sleep modes (IDLE, STANDBY, BACKUP) with consumption as low as a few microamps, making it suitable for battery-powered and energy-harvesting applications. The 48MHz Cortex-M0+ core with single-cycle multiplier provides strong integer performance for control loops, while the Event System and DMA enable low-overhead peripheral chaining. Typical applications include industrial lighting control, brushless DC (BLDC) motor drive, USB-equipped consumer devices, IoT sensor hubs, and human-machine interface (HMI) controllers. The wide temperature range and AEC-Q100 grade also support automotive body electronics and dashboard modules. When designing with this MCU, provide adequate decoupling (100nF + bulk capacitor near each VDD pin), keep the 32.768KHz crystal traces symmetric, and reserve a SWD header (SWDIO/SWDCLK/RESET/GND) on the PCB for in-circuit programming. The Cortex-M0+ core has no hardware FPU, so favour fixed-point math in DSP loops to avoid CPU saturation. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design considerations not consolidated in the manufacturer datasheet, providing actionable procurement and design value for engineering teams.

Cotação Contato