BTS70402EPGXUMA1 vs BTH62001ENAXUMA1 Comparação
Comparação detalhada lado a lado de BTS70402EPGXUMA1 por Infineon e BTH62001ENAXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Infineon
BTH62001ENAXUMA1 - 48V 200mΩ 1.7A Smart High-Side Switch | Infineon
BTH62001ENAXUMA1 ✓ AtivoComparação de especificações
| Parâmetro | BTS70402EPGXUMA1 | BTH62001ENAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $3,18 | $1,05 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Função | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | — |
| Configuração de saída | High-side, N-channel MOSFET | High-Side |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | 8 V to 60 V |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | Over-current, over-temperature, over-voltage, load-dump, reverse battery |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Faixa de temperatura de operação | -40 °C to +150 °C junction | -40 °C to +150 °C (junction) |
| Encapsulamento | PG-TSDSO-14 (exposed thermal pad) | PG-TDSO-8-31 |
| Tipo de montagem | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Family | — | PROFET™ + 48V |
| Canais | — | 1 |
| On-State Resistance (RDS(on) @ 25 °C) | — | 200 mΩ (typical) |
| Continuous Load Current | — | 1.7 A |
| Input Type | — | Active-High / Active-Low |
| Current Sense | — | Analog proportional output |
| Automotive Qualification | — | AEC-Q100 |
| Functional Safety | — | ISO 26262-ready |
| Status RoHS | — | Compliant |