BTS70402EPGXUMA1 vs BTH62001ENAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70402EPGXUMA1 par Infineon et BTH62001ENAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTH62001ENAXUMA1 - 48V 200mΩ 1.7A Smart High-Side Switch | Infineon
BTH62001ENAXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS70402EPGXUMA1 | BTH62001ENAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,18 | $1,05 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Fonction | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | — |
| Configuration de sortie | High-side, N-channel MOSFET | High-Side |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | 8 V to 60 V |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | Over-current, over-temperature, over-voltage, load-dump, reverse battery |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | -40 °C to +150 °C (junction) |
| Boîtier | PG-TSDSO-14 (exposed thermal pad) | PG-TDSO-8-31 |
| Type de montage | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Family | — | PROFET™ + 48V |
| Canaux | — | 1 |
| On-State Resistance (RDS(on) @ 25 °C) | — | 200 mΩ (typical) |
| Continuous Load Current | — | 1.7 A |
| Input Type | — | Active-High / Active-Low |
| Current Sense | — | Analog proportional output |
| Automotive Qualification | — | AEC-Q100 |
| Functional Safety | — | ISO 26262-ready |
| Statut RoHS | — | Compliant |