INA122P vs INA126PA Comparação
Comparação detalhada lado a lado de INA122P por Texas Instruments e INA126PA por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | INA122P | INA126PA |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Obsolete |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Two-op-amp design | Two-operating-amplifier instrumentation amplifier |
| Corrente de repouso | 60 µA | 175 µA per channel |
| Supply Voltage Range | 2.2 V to 36 V | ±1.35 V to ±18 V |
| Dual-Supply Range | ±18 V | — |
| Common-Mode Range | V− − 0.1 V | — |
| Output Swing | Rail-to-rail | — |
| Low Offset Voltage | 250 µV maximum | — |
| Low Offset Drift | 3 µV/°C maximum | — |
| Circuit Count | 1 circuit | — |
| Encapsulamento | 8-pin plastic DIP (8-PDIP) | 8-pin PDIP |
| Tipo de montagem | Through-hole | Through-hole |
| Temperatura de operação | −40 °C to +85 °C | — |
| Application Category | Portable medical and data-acquisition instrumentation | — |
| Signal Type | Differential | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | unknown | — |
| Device Type | — | Single-channel precision instrumentation amplifier |
| Maximum Supply Voltage | — | 36 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Input Offset Voltage | — | 250 µV |
| Gain Range | — | 1 V/V to 1000 V/V |
| Small-Signal Bandwidth | — | 200 kHz |
| Slew Rate | — | 0.04 V/µs |
| Number of Amplifiers | — | 1 circuit |
| Faixa de temperatura de operação | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Gain-Setting Resistance | — | [DATA_NEEDED: gain-setting resistance] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |